* Shaper? CBQ?
@ 2001-02-22 22:41 Neal Nelson
0 siblings, 0 replies; only message in thread
From: Neal Nelson @ 2001-02-22 22:41 UTC (permalink / raw)
To: linux-kernel
I am trying to set up a Linux box as a bridge that will limit
throughput (and maybe even introduce delays in forwarding). I
am running 2.2.16-22 (RedHat 7.0). I have bridging working
between two lan cards.
I thought maybe I could limit transmit speed on one lan card
with shaper0 and limit the transmit speed of the other lan
card as shaper1.
When I try to configure shaper1 I get a "no such device"
message. The shaper.c source code shows shaper0-3. Should
there be a shaper1?
Can I shape two cards on the same machine? If so how?
If not, should I configure two machines as bridges and shape
one card in each machine?
Should the shaper code work with the bridging code?
Should I not use shaper at all? Maybe I should use CBQ?
Thanks in advance.
Neal Nelson
neal@nna.com
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-02-22 21:42 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-02-22 22:41 Shaper? CBQ? Neal Nelson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®