* network unusable
@ 2001-03-23 21:44 Michael Devogelaere
2001-03-24 15:36 ` Ingo Oeser
0 siblings, 1 reply; 2+ messages in thread
From: Michael Devogelaere @ 2001-03-23 21:44 UTC (permalink / raw)
To: linux-kernel
Hi,
I'm experiencing problems with an rtl8029-nic. The computer acts as a
multicast-client receiving a disk-image from a server. That transfer went
fine during the first 1.5 gb and then the machine stopped responding.
I tried to ping it, but got no answer. On the machine i see that the
error-packets (/sbin/ifconfig) grow very fast, but the machine cannot
send or receive anymore. The arp-table contains 00:00:.. for all
hw-addresses. Dmesg shows:
eth0: bogus packet size: 65360, status=0x0 nxpg=0x0
(repeated for 100+ times)
The machine runs kernel 2.4.2 without module-support. All other participating
computers have exactly the same hardware and software (they were all cloned
with ghost). If i restart the program, everything goes fine for some
minutes and then another computer crashes with exactly the same symptoms.
When i restart the network-configuration, everything seems to work again.
Any help would be appreciated !
Kindly regards,
Michael Devogelaere.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: network unusable
2001-03-23 21:44 network unusable Michael Devogelaere
@ 2001-03-24 15:36 ` Ingo Oeser
0 siblings, 0 replies; 2+ messages in thread
From: Ingo Oeser @ 2001-03-24 15:36 UTC (permalink / raw)
To: Michael Devogelaere; +Cc: linux-kernel
On Fri, Mar 23, 2001 at 10:44:58PM +0100, Michael Devogelaere wrote:
> I'm experiencing problems with an rtl8029-nic. The computer acts as a
> multicast-client receiving a disk-image from a server. That transfer went
> fine during the first 1.5 gb and then the machine stopped responding.
> I tried to ping it, but got no answer. On the machine i see that the
> error-packets (/sbin/ifconfig) grow very fast, but the machine cannot
> send or receive anymore. The arp-table contains 00:00:.. for all
> hw-addresses. Dmesg shows:
> eth0: bogus packet size: 65360, status=0x0 nxpg=0x0
> (repeated for 100+ times)
>
> The machine runs kernel 2.4.2 without module-support. All other participating
> computers have exactly the same hardware and software (they were all cloned
> with ghost). If i restart the program, everything goes fine for some
> minutes and then another computer crashes with exactly the same symptoms.
> When i restart the network-configuration, everything seems to work again.
Could you tell more about your hardware? Does it still happen
with 2.4.2-ac20 (which I consider most stable for now ;-))?
Full dmesg from booting and after inserting the proper networking
modules, your .config and lscpi -vvvv would be nice.
I don't experience any problems like that here.
Regards
Ingo Oeser
--
10.+11.03.2001 - 3. Chemnitzer LinuxTag <http://www.tu-chemnitz.de/linux/tag>
<<<<<<<<<<<< been there and had much fun >>>>>>>>>>>>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-03-24 15:36 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-03-23 21:44 network unusable Michael Devogelaere
2001-03-24 15:36 ` Ingo Oeser
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®