* [CFT][PATCH] pci/proc.c cleanup
@ 2001-11-15 6:01 Alexander Viro
2001-11-15 12:55 ` David S. Miller
0 siblings, 1 reply; 3+ messages in thread
From: Alexander Viro @ 2001-11-15 6:01 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel
[Grr... Apologies for resend - previous one got subject mangled ;-/]
Patch below switches both /proc/bus/pci/devices and /proc/pci
to seq_file (same iterator). Results:
a) lots of crap had disappeared.
b) /proc/pci/bus/devices can contain more than 3Kb (current tree
is limited to that and it's Not Good(tm))
c) code is procfs-agnostic now (i.e. we use procfs only for
directory operations)
Unrelated obvious fix is in pci_proc_detach_bus() - it had wrong
check (apparently copied from pci_proc_attach_bus(); when we want to
create something it makes sense to check that it doesn't exist, but on
destruction we want the opposite ;-)
It works here and applies both to 2.4.15-pre* and 2.4.13-ac*.
Please, test - it's pretty straightforward and if there is no complaints
I'm submitting that for inclusion into the tree.
/me wonders why the heck everybody kept torturing themselves in procfs
callbacks instead of doing generic buffering code years ago...
diff -urN S15-pre4/drivers/pci/proc.c S15-pre4-pci/drivers/pci/proc.c
--- S15-pre4/drivers/pci/proc.c Wed Nov 14 10:28:06 2001
+++ S15-pre4-pci/drivers/pci/proc.c Thu Nov 15 00:38:12 2001
@@ -11,6 +11,7 @@
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
+#include <linux/seq_file.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
@@ -302,53 +303,72 @@
#define LONG_FORMAT "\t%16lx"
#endif
-static int
-get_pci_dev_info(char *buf, char **start, off_t pos, int count)
+/* iterator */
+static void *start(struct seq_file *m, loff_t *pos)
{
+ struct list_head *p = &pci_devices;
+ loff_t n = *pos;
+
+ /* XXX: surely we need some locking for traversing the list? */
+ while (n--) {
+ p = p->next;
+ if (p == &pci_devices)
+ return NULL;
+ }
+ return p;
+}
+static void *next(struct seq_file *m, void *v, loff_t *pos)
+{
+ struct list_head *p = v;
+ (*pos)++;
+ return p->next != &pci_devices ? p->next : NULL;
+}
+static void stop(struct seq_file *m, void *v)
+{
+ /* release whatever locks we need */
+}
+
+static int show_device(struct seq_file *m, void *v)
+{
+ struct list_head *p = v;
const struct pci_dev *dev;
- off_t at = 0;
- int len, i, cnt;
+ const struct pci_driver *drv;
+ int i;
+
+ if (p == &pci_devices)
+ return 0;
- cnt = 0;
- pci_for_each_dev(dev) {
- const struct pci_driver *drv = pci_dev_driver(dev);
- len = sprintf(buf, "%02x%02x\t%04x%04x\t%x",
+ dev = pci_dev_g(p);
+ drv = pci_dev_driver(dev);
+ seq_printf(m, "%02x%02x\t%04x%04x\t%x",
dev->bus->number,
dev->devfn,
dev->vendor,
dev->device,
dev->irq);
- /* Here should be 7 and not PCI_NUM_RESOURCES as we need to preserve compatibility */
- for(i=0; i<7; i++)
- len += sprintf(buf+len, LONG_FORMAT,
- dev->resource[i].start | (dev->resource[i].flags & PCI_REGION_FLAG_MASK));
- for(i=0; i<7; i++)
- len += sprintf(buf+len, LONG_FORMAT, dev->resource[i].start < dev->resource[i].end ?
- dev->resource[i].end - dev->resource[i].start + 1 : 0);
- buf[len++] = '\t';
- if (drv)
- len += sprintf(buf+len, "%s", drv->name);
- buf[len++] = '\n';
- at += len;
- if (at >= pos) {
- if (!*start) {
- *start = buf + (pos - (at - len));
- cnt = at - pos;
- } else
- cnt += len;
- buf += len;
- if (cnt >= count)
- /*
- * proc_file_read() gives us 1KB of slack so it's OK if the
- * above printfs write a little beyond the buffer end (we
- * never write more than 1KB beyond the buffer end).
- */
- break;
- }
- }
- return (count > cnt) ? cnt : count;
+ /* Here should be 7 and not PCI_NUM_RESOURCES as we need to preserve compatibility */
+ for(i=0; i<7; i++)
+ seq_printf(m, LONG_FORMAT,
+ dev->resource[i].start |
+ (dev->resource[i].flags & PCI_REGION_FLAG_MASK));
+ for(i=0; i<7; i++)
+ seq_printf(m, LONG_FORMAT,
+ dev->resource[i].start < dev->resource[i].end ?
+ dev->resource[i].end - dev->resource[i].start + 1 : 0);
+ seq_putc(m, '\t');
+ if (drv)
+ seq_printf(m, "%s", drv->name);
+ seq_putc(m, '\n');
+ return 0;
}
+static struct seq_operations proc_bus_pci_devices_op = {
+ start: start,
+ next: next,
+ stop: stop,
+ show: show_device
+};
+
static struct proc_dir_entry *proc_bus_pci_dir;
int pci_proc_attach_device(struct pci_dev *dev)
@@ -388,10 +408,10 @@
int pci_proc_attach_bus(struct pci_bus* bus)
{
- struct proc_dir_entry *de;
- char name[16];
+ struct proc_dir_entry *de = bus->procdir;
- if (!(de = bus->procdir)) {
+ if (!de) {
+ char name[16];
sprintf(name, "%02x", bus->number);
de = bus->procdir = proc_mkdir(name, proc_bus_pci_dir);
if (!de)
@@ -402,11 +422,9 @@
int pci_proc_detach_bus(struct pci_bus* bus)
{
- struct proc_dir_entry *de;
-
- if (!(de = bus->procdir)) {
+ struct proc_dir_entry *de = bus->procdir;
+ if (de)
remove_proc_entry(de->name, proc_bus_pci_dir);
- }
return 0;
}
@@ -421,54 +439,56 @@
* The configuration string is stored starting at buf[len]. If the
* string would exceed the size of the buffer (SIZE), 0 is returned.
*/
-static int sprint_dev_config(struct pci_dev *dev, char *buf, int size)
+static int show_dev_config(struct seq_file *m, void *v)
{
+ struct list_head *p = v;
+ struct pci_dev *dev;
+ struct pci_driver *drv;
u32 class_rev;
unsigned char latency, min_gnt, max_lat, *class;
- int reg, len = 0;
+ int reg;
+
+ if (p == &pci_devices) {
+ seq_puts(m, "PCI devices found:\n");
+ return 0;
+ }
+
+ dev = pci_dev_g(p);
+ drv = pci_dev_driver(dev);
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
pci_read_config_byte (dev, PCI_LATENCY_TIMER, &latency);
pci_read_config_byte (dev, PCI_MIN_GNT, &min_gnt);
pci_read_config_byte (dev, PCI_MAX_LAT, &max_lat);
- if (len + 160 > size)
- return -1;
- len += sprintf(buf + len, " Bus %2d, device %3d, function %2d:\n",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ seq_printf(m, " Bus %2d, device %3d, function %2d:\n",
+ dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
class = pci_class_name(class_rev >> 16);
if (class)
- len += sprintf(buf+len, " %s", class);
+ seq_printf(m, " %s", class);
else
- len += sprintf(buf+len, " Class %04x", class_rev >> 16);
- len += sprintf(buf+len, ": %s (rev %d).\n", dev->name, class_rev & 0xff);
+ seq_printf(m, " Class %04x", class_rev >> 16);
+ seq_printf(m, ": %s (rev %d).\n", dev->name, class_rev & 0xff);
- if (dev->irq) {
- if (len + 40 > size)
- return -1;
- len += sprintf(buf + len, " IRQ %d.\n", dev->irq);
- }
+ if (dev->irq)
+ seq_printf(m, " IRQ %d.\n", dev->irq);
if (latency || min_gnt || max_lat) {
- if (len + 80 > size)
- return -1;
- len += sprintf(buf + len, " Master Capable. ");
+ seq_printf(m, " Master Capable. ");
if (latency)
- len += sprintf(buf + len, "Latency=%d. ", latency);
+ seq_printf(m, "Latency=%d. ", latency);
else
- len += sprintf(buf + len, "No bursts. ");
+ seq_puts(m, "No bursts. ");
if (min_gnt)
- len += sprintf(buf + len, "Min Gnt=%d.", min_gnt);
+ seq_printf(m, "Min Gnt=%d.", min_gnt);
if (max_lat)
- len += sprintf(buf + len, "Max Lat=%d.", max_lat);
- len += sprintf(buf + len, "\n");
+ seq_printf(m, "Max Lat=%d.", max_lat);
+ seq_putc(m, '\n');
}
for (reg = 0; reg < 6; reg++) {
struct resource *res = dev->resource + reg;
unsigned long base, end, flags;
- if (len + 40 > size)
- return -1;
base = res->start;
end = res->end;
flags = res->flags;
@@ -476,9 +496,8 @@
continue;
if (flags & PCI_BASE_ADDRESS_SPACE_IO) {
- len += sprintf(buf + len,
- " I/O at 0x%lx [0x%lx].\n",
- base, end);
+ seq_printf(m, " I/O at 0x%lx [0x%lx].\n",
+ base, end);
} else {
const char *pref, *type = "unknown";
@@ -494,65 +513,58 @@
case PCI_BASE_ADDRESS_MEM_TYPE_64:
type = "64 bit"; break;
}
- len += sprintf(buf + len,
- " %srefetchable %s memory at "
+ seq_printf(m, " %srefetchable %s memory at "
"0x%lx [0x%lx].\n", pref, type,
base,
end);
}
}
-
- return len;
+ return 0;
}
-/*
- * Return list of PCI devices as a character string for /proc/pci.
- * BUF is a buffer that is PAGE_SIZE bytes long.
- */
-static int pci_read_proc(char *buf, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int nprinted, len, begin = 0;
- struct pci_dev *dev;
-
- len = sprintf(buf, "PCI devices found:\n");
+static struct seq_operations proc_pci_op = {
+ start: start,
+ next: next,
+ stop: stop,
+ show: show_dev_config
+};
- *eof = 1;
- pci_for_each_dev(dev) {
- nprinted = sprint_dev_config(dev, buf + len, PAGE_SIZE - len);
- if (nprinted < 0) {
- *eof = 0;
- break;
- }
- len += nprinted;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
- if (len+begin >= off+count)
- break;
- }
- off -= begin;
- *start = buf + off;
- len -= off;
- if (len>count)
- len = count;
- if (len<0)
- len = 0;
- return len;
+static int proc_bus_pci_dev_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &proc_bus_pci_devices_op);
}
+static struct file_operations proc_bus_pci_dev_operations = {
+ open: proc_bus_pci_dev_open,
+ read: seq_read,
+ llseek: seq_lseek,
+ release: seq_release,
+};
+static int proc_pci_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &proc_pci_op);
+}
+static struct file_operations proc_pci_operations = {
+ open: proc_pci_open,
+ read: seq_read,
+ llseek: seq_lseek,
+ release: seq_release,
+};
static int __init pci_proc_init(void)
{
if (pci_present()) {
+ struct proc_dir_entry *entry;
struct pci_dev *dev;
proc_bus_pci_dir = proc_mkdir("pci", proc_bus);
- create_proc_info_entry("devices", 0, proc_bus_pci_dir,
- get_pci_dev_info);
+ entry = create_proc_entry("devices", 0, proc_bus_pci_dir);
+ if (entry)
+ entry->proc_fops = &proc_bus_pci_dev_operations;
pci_for_each_dev(dev) {
pci_proc_attach_device(dev);
}
- create_proc_read_entry("pci", 0, NULL, pci_read_proc, NULL);
+ entry = create_proc_entry("pci", 0, NULL);
+ if (entry)
+ entry->proc_fops = &proc_pci_operations;
}
return 0;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [CFT][PATCH] pci/proc.c cleanup
2001-11-15 6:01 [CFT][PATCH] pci/proc.c cleanup Alexander Viro
@ 2001-11-15 12:55 ` David S. Miller
2001-11-17 2:25 ` [PATCH] more procfs fixes Alexander Viro
0 siblings, 1 reply; 3+ messages in thread
From: David S. Miller @ 2001-11-15 12:55 UTC (permalink / raw)
To: viro; +Cc: torvalds, linux-kernel
From: Alexander Viro <viro@math.psu.edu>
Date: Thu, 15 Nov 2001 01:01:45 -0500 (EST)
It works here and applies both to 2.4.15-pre* and 2.4.13-ac*.
Please, test - it's pretty straightforward and if there is no complaints
I'm submitting that for inclusion into the tree.
I like this patch but I would change one thing.
"start,next,stop" sound like global kernel helper functions, not PCI
SEQ specific helpers, why not name them pci_seq_start et al. instead?
That pci_devices list does need locking, particularly with the PCI hot
plug stuff in the tree now. But PCMCIA could already change the list
after boot too if I'm not mistaken.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] more procfs fixes.
2001-11-15 12:55 ` David S. Miller
@ 2001-11-17 2:25 ` Alexander Viro
0 siblings, 0 replies; 3+ messages in thread
From: Alexander Viro @ 2001-11-17 2:25 UTC (permalink / raw)
To: David S. Miller; +Cc: torvalds, linux-kernel
On Thu, 15 Nov 2001, David S. Miller wrote:
> I like this patch but I would change one thing.
>
> "start,next,stop" sound like global kernel helper functions, not PCI
> SEQ specific helpers, why not name them pci_seq_start et al. instead?
Umm... IMO start(), next(), stop() for anything non-static sounds like a
reason for very public execution, but anyway, renaming makes sense.
> That pci_devices list does need locking, particularly with the PCI hot
> plug stuff in the tree now. But PCMCIA could already change the list
> after boot too if I'm not mistaken.
It certainly does. However, that's a problem I'd be happy to leave to
PCI folks ;-)
OK, here's the next bunch of procfs stuff:
a) drivers/pci/proc.c
b) trivial cleanup of ia64 show_cpuinfo() (we never pass NULL as
the second argument, it's EOF indicator for seq_read()).
c) conversion of s390, s390x and sh get_cpuinfo().
Linus, please apply.
diff -urN S15-pre5/arch/alpha/kernel/setup.c S15-pre5-current/arch/alpha/kernel/setup.c
--- S15-pre5/arch/alpha/kernel/setup.c Thu Nov 15 23:42:54 2001
+++ S15-pre5-current/arch/alpha/kernel/setup.c Fri Nov 16 20:49:55 2001
@@ -1064,8 +1064,6 @@
char *sysvariation_name;
int nr_processors;
- if (!cpu)
- return 1;
cpu_index = (unsigned) (cpu->type - 1);
cpu_name = "Unknown";
if (cpu_index < N(cpu_names))
diff -urN S15-pre5/arch/s390/kernel/setup.c S15-pre5-current/arch/s390/kernel/setup.c
--- S15-pre5/arch/s390/kernel/setup.c Wed Oct 24 04:09:51 2001
+++ S15-pre5-current/arch/s390/kernel/setup.c Fri Nov 16 21:07:54 2001
@@ -34,6 +34,7 @@
#endif
#include <linux/bootmem.h>
#include <linux/console.h>
+#include <linux/seq_file.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/smp.h>
@@ -478,49 +479,48 @@
}
/*
- * get_cpuinfo - Get information on one CPU for use by procfs.
- *
- * Prints info on the next CPU into buffer. Beware, doesn't check for
- * buffer overflow. Current implementation of procfs assumes that the
- * resulting data is <= 1K.
- *
- * Args:
- * buffer -- you guessed it, the data buffer
- * cpu_np -- Input: next cpu to get (start at 0). Output: Updated.
- *
- * Returns number of bytes written to buffer.
+ * show_cpuinfo - Get information on one CPU for use by procfs.
*/
-int get_cpuinfo(char *buffer, unsigned *cpu_np)
+static int show_cpuinfo(struct seq_file *m, void *v)
{
struct cpuinfo_S390 *cpuinfo;
- char *p = buffer;
- unsigned n;
+ unsigned n = v;
- n = *cpu_np;
- while (n < NR_CPUS && (cpu_online_map & (1 << n)) == 0)
- n++;
- if (n >= NR_CPUS) {
- *cpu_np = NR_CPUS;
- return (0);
- }
- *cpu_np = n + 1;
-
- if (n == 0) {
- p += sprintf(p,"vendor_id : IBM/S390\n"
+ if (!n--) {
+ seq_printf(m, "vendor_id : IBM/S390\n"
"# processors : %i\n"
"bogomips per cpu: %lu.%02lu\n",
smp_num_cpus, loops_per_jiffy/(500000/HZ),
(loops_per_jiffy/(5000/HZ))%100);
+ } else if (cpu_online_map & (1 << n)) {
+ cpuinfo = &safe_get_cpu_lowcore(n).cpu_data;
+ seq_printf(m, "processor %i: "
+ "version = %02X, "
+ "identification = %06X, "
+ "machine = %04X\n",
+ n, cpuinfo->cpu_id.version,
+ cpuinfo->cpu_id.ident,
+ cpuinfo->cpu_id.machine);
}
- cpuinfo = &safe_get_cpu_lowcore(n).cpu_data;
- p += sprintf(p,"processor %i: "
- "version = %02X, "
- "identification = %06X, "
- "machine = %04X\n",
- n, cpuinfo->cpu_id.version,
- cpuinfo->cpu_id.ident,
- cpuinfo->cpu_id.machine);
- return p - buffer;
+ return 0;
}
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos <= NR_CPUS ? (void)(*pos+1) : NULL;
+}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+struct seq_operations cpuinfo_op = {
+ start: c_start,
+ next: c_next,
+ stop: c_stop,
+ show: show_cpuinfo,
+};
diff -urN S15-pre5/arch/s390x/kernel/setup.c S15-pre5-current/arch/s390x/kernel/setup.c
--- S15-pre5/arch/s390x/kernel/setup.c Wed Oct 24 04:09:53 2001
+++ S15-pre5-current/arch/s390x/kernel/setup.c Fri Nov 16 21:08:10 2001
@@ -34,6 +34,7 @@
#endif
#include <linux/bootmem.h>
#include <linux/console.h>
+#include <linux/seq_file.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/smp.h>
@@ -467,49 +468,48 @@
}
/*
- * get_cpuinfo - Get information on one CPU for use by procfs.
- *
- * Prints info on the next CPU into buffer. Beware, doesn't check for
- * buffer overflow. Current implementation of procfs assumes that the
- * resulting data is <= 1K.
- *
- * Args:
- * buffer -- you guessed it, the data buffer
- * cpu_np -- Input: next cpu to get (start at 0). Output: Updated.
- *
- * Returns number of bytes written to buffer.
+ * show_cpuinfo - Get information on one CPU for use by procfs.
*/
-int get_cpuinfo(char *buffer, unsigned *cpu_np)
+static int show_cpuinfo(struct seq_file *m, void *v)
{
struct cpuinfo_S390 *cpuinfo;
- char *p = buffer;
- unsigned n;
+ unsigned n = v;
- n = *cpu_np;
- while (n < NR_CPUS && (cpu_online_map & (1 << n)) == 0)
- n++;
- if (n >= NR_CPUS) {
- *cpu_np = NR_CPUS;
- return (0);
- }
- *cpu_np = n + 1;
-
- if (n == 0) {
- p += sprintf(p, "vendor_id : IBM/S390\n"
+ if (!n--) {
+ seq_printf(m, "vendor_id : IBM/S390\n"
"# processors : %i\n"
"bogomips per cpu: %lu.%02lu\n",
smp_num_cpus, loops_per_jiffy/(500000/HZ),
(loops_per_jiffy/(5000/HZ))%100);
+ } else if (cpu_online_map & (1 << n)) {
+ cpuinfo = &safe_get_cpu_lowcore(n).cpu_data;
+ seq_printf(m, "processor %i: "
+ "version = %02X, "
+ "identification = %06X, "
+ "machine = %04X\n",
+ n, cpuinfo->cpu_id.version,
+ cpuinfo->cpu_id.ident,
+ cpuinfo->cpu_id.machine);
}
- cpuinfo = &safe_get_cpu_lowcore(n).cpu_data;
- p += sprintf(p, "processor %i: "
- "version = %02X, "
- "identification = %06X, "
- "machine = %04X\n",
- n, cpuinfo->cpu_id.version,
- cpuinfo->cpu_id.ident,
- cpuinfo->cpu_id.machine);
- return p - buffer;
+ return 0;
}
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos <= NR_CPUS ? (void)(*pos+1) : NULL;
+}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+struct seq_operations cpuinfo_op = {
+ start: c_start,
+ next: c_next,
+ stop: c_stop,
+ show: show_cpuinfo,
+};
diff -urN S15-pre5/arch/sh/kernel/setup.c S15-pre5-current/arch/sh/kernel/setup.c
--- S15-pre5/arch/sh/kernel/setup.c Sun Sep 23 16:11:57 2001
+++ S15-pre5-current/arch/sh/kernel/setup.c Fri Nov 16 21:11:22 2001
@@ -31,6 +31,7 @@
#include <linux/bootmem.h>
#include <linux/console.h>
#include <linux/ctype.h>
+#include <linux/seq_file.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/pgtable.h>
@@ -517,24 +518,22 @@
* Get CPU information for use by the procfs.
*/
#ifdef CONFIG_PROC_FS
-int get_cpuinfo(char *buffer)
+static int show_cpuinfo(struct seq_file *m, void *v)
{
- char *p = buffer;
-
#if defined(__sh3__)
- p += sprintf(p,"cpu family\t: SH-3\n"
- "cache size\t: 8K-byte\n");
+ seq_printf(m, "cpu family\t: SH-3\n"
+ "cache size\t: 8K-byte\n");
#elif defined(__SH4__)
- p += sprintf(p,"cpu family\t: SH-4\n"
- "cache size\t: 8K-byte/16K-byte\n");
+ seq_printf(m, "cpu family\t: SH-4\n"
+ "cache size\t: 8K-byte/16K-byte\n");
#endif
- p += sprintf(p, "bogomips\t: %lu.%02lu\n\n",
+ seq_printf(m, "bogomips\t: %lu.%02lu\n\n",
loops_per_jiffy/(500000/HZ),
(loops_per_jiffy/(5000/HZ)) % 100);
- p += sprintf(p, "Machine: %s\n", sh_mv.mv_name);
+ seq_printf(m, "Machine: %s\n", sh_mv.mv_name);
#define PRINT_CLOCK(name, value) \
- p += sprintf(p, name " clock: %d.%02dMHz\n", \
+ seq_printf(m, name " clock: %d.%02dMHz\n", \
((value) / 1000000), ((value) % 1000000)/10000)
PRINT_CLOCK("CPU", boot_cpu_data.cpu_clock);
@@ -544,6 +543,24 @@
#endif
PRINT_CLOCK("Peripheral module", boot_cpu_data.module_clock);
- return p - buffer;
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return (void*)(*pos == 0);
}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ return NULL;
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+struct seq_operations cpuinfo_op = {
+ start: c_start,
+ next: c_next,
+ stop: c_stop,
+ show: show_cpuinfo,
+};
#endif
diff -urN S15-pre5/drivers/pci/proc.c S15-pre5-current/drivers/pci/proc.c
--- S15-pre5/drivers/pci/proc.c Thu Nov 15 23:43:02 2001
+++ S15-pre5-current/drivers/pci/proc.c Fri Nov 16 20:29:59 2001
@@ -11,6 +11,7 @@
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
+#include <linux/seq_file.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
@@ -302,53 +303,72 @@
#define LONG_FORMAT "\t%16lx"
#endif
-static int
-get_pci_dev_info(char *buf, char **start, off_t pos, int count)
+/* iterator */
+static void *pci_seq_start(struct seq_file *m, loff_t *pos)
{
+ struct list_head *p = &pci_devices;
+ loff_t n = *pos;
+
+ /* XXX: surely we need some locking for traversing the list? */
+ while (n--) {
+ p = p->next;
+ if (p == &pci_devices)
+ return NULL;
+ }
+ return p;
+}
+static void *pci_seq_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ struct list_head *p = v;
+ (*pos)++;
+ return p->next != &pci_devices ? p->next : NULL;
+}
+static void pci_seq_stop(struct seq_file *m, void *v)
+{
+ /* release whatever locks we need */
+}
+
+static int show_device(struct seq_file *m, void *v)
+{
+ struct list_head *p = v;
const struct pci_dev *dev;
- off_t at = 0;
- int len, i, cnt;
+ const struct pci_driver *drv;
+ int i;
+
+ if (p == &pci_devices)
+ return 0;
- cnt = 0;
- pci_for_each_dev(dev) {
- const struct pci_driver *drv = pci_dev_driver(dev);
- len = sprintf(buf, "%02x%02x\t%04x%04x\t%x",
+ dev = pci_dev_g(p);
+ drv = pci_dev_driver(dev);
+ seq_printf(m, "%02x%02x\t%04x%04x\t%x",
dev->bus->number,
dev->devfn,
dev->vendor,
dev->device,
dev->irq);
- /* Here should be 7 and not PCI_NUM_RESOURCES as we need to preserve compatibility */
- for(i=0; i<7; i++)
- len += sprintf(buf+len, LONG_FORMAT,
- dev->resource[i].start | (dev->resource[i].flags & PCI_REGION_FLAG_MASK));
- for(i=0; i<7; i++)
- len += sprintf(buf+len, LONG_FORMAT, dev->resource[i].start < dev->resource[i].end ?
- dev->resource[i].end - dev->resource[i].start + 1 : 0);
- buf[len++] = '\t';
- if (drv)
- len += sprintf(buf+len, "%s", drv->name);
- buf[len++] = '\n';
- at += len;
- if (at >= pos) {
- if (!*start) {
- *start = buf + (pos - (at - len));
- cnt = at - pos;
- } else
- cnt += len;
- buf += len;
- if (cnt >= count)
- /*
- * proc_file_read() gives us 1KB of slack so it's OK if the
- * above printfs write a little beyond the buffer end (we
- * never write more than 1KB beyond the buffer end).
- */
- break;
- }
- }
- return (count > cnt) ? cnt : count;
+ /* Here should be 7 and not PCI_NUM_RESOURCES as we need to preserve compatibility */
+ for(i=0; i<7; i++)
+ seq_printf(m, LONG_FORMAT,
+ dev->resource[i].start |
+ (dev->resource[i].flags & PCI_REGION_FLAG_MASK));
+ for(i=0; i<7; i++)
+ seq_printf(m, LONG_FORMAT,
+ dev->resource[i].start < dev->resource[i].end ?
+ dev->resource[i].end - dev->resource[i].start + 1 : 0);
+ seq_putc(m, '\t');
+ if (drv)
+ seq_printf(m, "%s", drv->name);
+ seq_putc(m, '\n');
+ return 0;
}
+static struct seq_operations proc_bus_pci_devices_op = {
+ start: pci_seq_start,
+ next: pci_seq_next,
+ stop: pci_seq_stop,
+ show: show_device
+};
+
static struct proc_dir_entry *proc_bus_pci_dir;
int pci_proc_attach_device(struct pci_dev *dev)
@@ -388,10 +408,10 @@
int pci_proc_attach_bus(struct pci_bus* bus)
{
- struct proc_dir_entry *de;
- char name[16];
+ struct proc_dir_entry *de = bus->procdir;
- if (!(de = bus->procdir)) {
+ if (!de) {
+ char name[16];
sprintf(name, "%02x", bus->number);
de = bus->procdir = proc_mkdir(name, proc_bus_pci_dir);
if (!de)
@@ -402,11 +422,9 @@
int pci_proc_detach_bus(struct pci_bus* bus)
{
- struct proc_dir_entry *de;
-
- if (!(de = bus->procdir)) {
+ struct proc_dir_entry *de = bus->procdir;
+ if (de)
remove_proc_entry(de->name, proc_bus_pci_dir);
- }
return 0;
}
@@ -421,54 +439,56 @@
* The configuration string is stored starting at buf[len]. If the
* string would exceed the size of the buffer (SIZE), 0 is returned.
*/
-static int sprint_dev_config(struct pci_dev *dev, char *buf, int size)
+static int show_dev_config(struct seq_file *m, void *v)
{
+ struct list_head *p = v;
+ struct pci_dev *dev;
+ struct pci_driver *drv;
u32 class_rev;
unsigned char latency, min_gnt, max_lat, *class;
- int reg, len = 0;
+ int reg;
+
+ if (p == &pci_devices) {
+ seq_puts(m, "PCI devices found:\n");
+ return 0;
+ }
+
+ dev = pci_dev_g(p);
+ drv = pci_dev_driver(dev);
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
pci_read_config_byte (dev, PCI_LATENCY_TIMER, &latency);
pci_read_config_byte (dev, PCI_MIN_GNT, &min_gnt);
pci_read_config_byte (dev, PCI_MAX_LAT, &max_lat);
- if (len + 160 > size)
- return -1;
- len += sprintf(buf + len, " Bus %2d, device %3d, function %2d:\n",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ seq_printf(m, " Bus %2d, device %3d, function %2d:\n",
+ dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
class = pci_class_name(class_rev >> 16);
if (class)
- len += sprintf(buf+len, " %s", class);
+ seq_printf(m, " %s", class);
else
- len += sprintf(buf+len, " Class %04x", class_rev >> 16);
- len += sprintf(buf+len, ": %s (rev %d).\n", dev->name, class_rev & 0xff);
+ seq_printf(m, " Class %04x", class_rev >> 16);
+ seq_printf(m, ": %s (rev %d).\n", dev->name, class_rev & 0xff);
- if (dev->irq) {
- if (len + 40 > size)
- return -1;
- len += sprintf(buf + len, " IRQ %d.\n", dev->irq);
- }
+ if (dev->irq)
+ seq_printf(m, " IRQ %d.\n", dev->irq);
if (latency || min_gnt || max_lat) {
- if (len + 80 > size)
- return -1;
- len += sprintf(buf + len, " Master Capable. ");
+ seq_printf(m, " Master Capable. ");
if (latency)
- len += sprintf(buf + len, "Latency=%d. ", latency);
+ seq_printf(m, "Latency=%d. ", latency);
else
- len += sprintf(buf + len, "No bursts. ");
+ seq_puts(m, "No bursts. ");
if (min_gnt)
- len += sprintf(buf + len, "Min Gnt=%d.", min_gnt);
+ seq_printf(m, "Min Gnt=%d.", min_gnt);
if (max_lat)
- len += sprintf(buf + len, "Max Lat=%d.", max_lat);
- len += sprintf(buf + len, "\n");
+ seq_printf(m, "Max Lat=%d.", max_lat);
+ seq_putc(m, '\n');
}
for (reg = 0; reg < 6; reg++) {
struct resource *res = dev->resource + reg;
unsigned long base, end, flags;
- if (len + 40 > size)
- return -1;
base = res->start;
end = res->end;
flags = res->flags;
@@ -476,9 +496,8 @@
continue;
if (flags & PCI_BASE_ADDRESS_SPACE_IO) {
- len += sprintf(buf + len,
- " I/O at 0x%lx [0x%lx].\n",
- base, end);
+ seq_printf(m, " I/O at 0x%lx [0x%lx].\n",
+ base, end);
} else {
const char *pref, *type = "unknown";
@@ -494,65 +513,58 @@
case PCI_BASE_ADDRESS_MEM_TYPE_64:
type = "64 bit"; break;
}
- len += sprintf(buf + len,
- " %srefetchable %s memory at "
+ seq_printf(m, " %srefetchable %s memory at "
"0x%lx [0x%lx].\n", pref, type,
base,
end);
}
}
-
- return len;
+ return 0;
}
-/*
- * Return list of PCI devices as a character string for /proc/pci.
- * BUF is a buffer that is PAGE_SIZE bytes long.
- */
-static int pci_read_proc(char *buf, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int nprinted, len, begin = 0;
- struct pci_dev *dev;
-
- len = sprintf(buf, "PCI devices found:\n");
+static struct seq_operations proc_pci_op = {
+ start: pci_seq_start,
+ next: pci_seq_next,
+ stop: pci_seq_stop,
+ show: show_dev_config
+};
- *eof = 1;
- pci_for_each_dev(dev) {
- nprinted = sprint_dev_config(dev, buf + len, PAGE_SIZE - len);
- if (nprinted < 0) {
- *eof = 0;
- break;
- }
- len += nprinted;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
- if (len+begin >= off+count)
- break;
- }
- off -= begin;
- *start = buf + off;
- len -= off;
- if (len>count)
- len = count;
- if (len<0)
- len = 0;
- return len;
+static int proc_bus_pci_dev_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &proc_bus_pci_devices_op);
}
+static struct file_operations proc_bus_pci_dev_operations = {
+ open: proc_bus_pci_dev_open,
+ read: seq_read,
+ llseek: seq_lseek,
+ release: seq_release,
+};
+static int proc_pci_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &proc_pci_op);
+}
+static struct file_operations proc_pci_operations = {
+ open: proc_pci_open,
+ read: seq_read,
+ llseek: seq_lseek,
+ release: seq_release,
+};
static int __init pci_proc_init(void)
{
if (pci_present()) {
+ struct proc_dir_entry *entry;
struct pci_dev *dev;
proc_bus_pci_dir = proc_mkdir("pci", proc_bus);
- create_proc_info_entry("devices", 0, proc_bus_pci_dir,
- get_pci_dev_info);
+ entry = create_proc_entry("devices", 0, proc_bus_pci_dir);
+ if (entry)
+ entry->proc_fops = &proc_bus_pci_dev_operations;
pci_for_each_dev(dev) {
pci_proc_attach_device(dev);
}
- create_proc_read_entry("pci", 0, NULL, pci_read_proc, NULL);
+ entry = create_proc_entry("pci", 0, NULL);
+ if (entry)
+ entry->proc_fops = &proc_pci_operations;
}
return 0;
}
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-11-17 2:25 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-11-15 6:01 [CFT][PATCH] pci/proc.c cleanup Alexander Viro
2001-11-15 12:55 ` David S. Miller
2001-11-17 2:25 ` [PATCH] more procfs fixes Alexander Viro
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®