Re: Status of DRI modules for i810 with > 2.4.19-pre6

Re: Status of DRI modules for i810 with > 2.4.19-pre6

[Steve Kieu]

[-- Attachment #1: Type: text/plain, Size: 200 bytes --]


No, it is not fixed yet! I attched the dmesg.log but
if required I will make the result through ksymoop. 

Regards,


=====
Steve Kieu

http://www.sold.com.au - SOLD.com.au
- Find yourself a bargain!

[-- Attachment #2: dmesg.log --]
[-- Type: application/octet-stream, Size: 4895 bytes --]

Linux version 2.4.19-rc1-ac3 (sk@Linux) (gcc version 2.96 20000731 (Mandrake Linux 8.1 2.96-0.63.1mdk)) #1 Mon Jul 15 09:34:56 UTC 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007f00000 (usable)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
127MB LOWMEM available.
On node 0 totalpages: 32512
zone(0): 4096 pages.
zone(1): 28416 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=2419rc1ac3 ro root=303
Initializing CPU#0
Detected 400.917 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 799.53 BogoMIPS
Memory: 126548k/130048k available (962k kernel code, 3112k reserved, 204k data, 80k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 2048 (order: 2, 16384 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=15818 max_file_pages=0 max_inodes=0 max_dentries=15818
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/2420] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 240 slots per queue, batch=60
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPF3102AT, ATA DISK drive
hdb: IDE/ATAPI CD-ROM 52XS, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: host protected area => 1
hda: 20015856 sectors (10248 MB) w/512KiB Cache, CHS=1245/255/63, UDMA(33)
Partition check:
 hda: hda1 hda2 hda3 hda4
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Detected an Intel i810 Chipset.
agpgart: AGP aperture is 64M @ 0xd8000000
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 80k freed
Adding Swap: 72256k swap-space (priority -1)
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
Adding Swap: 61432k swap-space (priority -2)
[drm] AGP 0.99 on Intel i810 @ 0xd8000000 64MB
[drm] Initialized i810 1.1.0 20000928 on minor 63
mtrr: base(0xd8000000) is not aligned on a size(0x12c000) boundary
Unable to handle kernel paging request at virtual address 0100001b
 printing eip:
c01292f2
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c01292f2>]    Not tainted
EFLAGS: 00013246
eax: 01000000   ebx: c5475000   ecx: c11127d0   edx: 00000000
esi: c11127d0   edi: c88c7260   ebp: 00000000   esp: c6719ee4
ds: 0018   es: 0018   ss: 0018
Process X (pid: 111, stackpage=c6719000)
Stack: c5475000 c11127d0 c88c1390 c11127d0 c5c032c0 c7b45800 c88c13ef c88c7260 
       c5475000 00000000 bffff978 c6719f58 c88c18cc c88c7260 c88c7260 00000002 
       00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
Call Trace: [<c88c1390>] [<c88c13ef>] [<c88c7260>] [<c88c18cc>] [<c88c7260>] 
   [<c88c7260>] [<c88c7260>] [<c88c0e34>] [<c0147487>] [<c010896b>] 

Code: 0f b6 50 1b 8b 1c 95 48 4e 24 c0 89 c2 69 d2 01 00 37 9e 8b 
 <3>X[111] exited with preempt_count 1

Re: Status of DRI modules for i810 with > 2.4.19-pre6

[Alan Cox]

On Sun, 2002-07-14 at 23:09, Steve Kieu wrote:
> 
> No, it is not fixed yet! I attched the dmesg.log but
> if required I will make the result through ksymoop. 

Duplicate the problem with a 2.4.19-rc1-ac3 kernel (not one with random
pre-empt patches). Then get a traceback. Also be sure to use XFree86 4.2
or later

Re: Status of DRI modules for i810 with > 2.4.19-pre6

[Steve Kieu]

> > No, it is not fixed yet! I attched the dmesg.log
> but
> > if required I will make the result through
> ksymoop. 
> 
> Duplicate the problem with a 2.4.19-rc1-ac3 kernel
> (not one with random
> pre-empt patches). Then get a traceback. Also be
> sure to use XFree86 4.2
> or later

I am forced to upgrade to XFree86-4.2.0 :-) but
happily to say the problem is gone with and without
preemptible patch.

So it is rather a bug in XFree86 < 4.2.0 ?

Thanks




=====
Steve Kieu

http://www.sold.com.au - SOLD.com.au
- Find yourself a bargain!

Re: Status of DRI modules for i810 with > 2.4.19-pre6

[Steve Kieu]

> 
> Duplicate the problem with a 2.4.19-rc1-ac3 kernel
> (not one with random
> pre-empt patches). Then get a traceback. Also be
> sure to use XFree86 4.2
> or later
>  

The OOPS nolonger happened BUT it is useless as
XFree86-4.2.0 has problem with dri for i810; in the
XFree86 log file it says Direct rendering is enabled.
But run glxinfo shows that no other software can use
it!. I have searched and found a lot users have the
same thing. although I am quite sure that I installed
it properly (rm all old libGl etc...)

Go back to XFree86-4.1.0 compile 2.4.19-rc1-ac3 with
new dri modules; the oop also disappear. (That oops I
reported last time is with the old dri modules); I
thought wow it should be fine, but still no luck. run
glxinfo is fine; but run real application like
bzflags; bzflags can not run, it hang forever. No
OOPS, nothing, everything seems to be normal. Have to
killall -9  bzflag (15 doesn't stop it). Not sure what
caused this; Go back to use kernel 2.4.18-ck4  
everything is in order :-)

Regards,



=====
Steve Kieu

http://www.sold.com.au - SOLD.com.au
- Find yourself a bargain!

Re: Status of DRI modules for i810 with > 2.4.19-pre6

[Alan Cox]

On Mon, 2002-07-15 at 07:57, Steve Kieu wrote:
> I am forced to upgrade to XFree86-4.2.0 :-) but
> happily to say the problem is gone with and without
> preemptible patch.
> 
> So it is rather a bug in XFree86 < 4.2.0 ?

There are DRI problems with i810 older XFree86, with the kernel AGP code
and with the kernel DRI code. All three of which have at some point been
tackled. My i810 is looking pretty solid at the moment but I've got some
3D funnies to look into

Re: Status of DRI modules for i810 with > 2.4.19-pre6

[Alan Cox]

On Sat, 2002-07-13 at 22:02, Steve Kieu wrote:
> Last time I tried 2.4.19-rc1-aa2 and the OOP still
> persists when exiting XFree86 (enable DRI with chipset
> i810)
> 
> Is there anybody who is working on this issue?

It should be fixed in the combination of stuff in 2.4.19rc1-ac3. Arjan
van de Ven has fixed several problems with the i810 DRI

Status of DRI modules for i810 with > 2.4.19-pre6

[Steve Kieu]

Hi,

This problem I posted rather long time ago

Last time I tried 2.4.19-rc1-aa2 and the OOP still
persists when exiting XFree86 (enable DRI with chipset
i810)

Is there anybody who is working on this issue?

Regards,

=====
Steve Kieu

http://www.sold.com.au - SOLD.com.au
- Find yourself a bargain!