* RE: PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading @ 2003-06-26 16:29 ` Pallipadi, Venkatesh 2003-06-27 7:27 ` Bruno Cornec 0 siblings, 1 reply; 5+ messages in thread From: Pallipadi, Venkatesh @ 2003-06-26 16:29 UTC (permalink / raw) To: Bruno Cornec, linux-kernel; +Cc: sophie.pasquier Hi, Can you enable ACPI in the config and try again. With that you should be able to see all the processors. Thanks, -Venki > -----Original Message----- > From: Bruno Cornec [mailto:Bruno.Cornec@hp.com] > Sent: Thursday, June 26, 2003 7:08 AM > To: linux-kernel@vger.kernel.org > Cc: sophie.pasquier@hp.com; Pallipadi, Venkatesh > Subject: Re: PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading > > > Hello, > > Thanks to Venkatesh Pallipadi, I made some progress on that problem. > I recompiled 2.4.21-ac2 and activated the CONFIG_X86_CLUSTERED_APIC > Now with HT activated in the BIOS, the machine is able to > boot but only > half of the processors are detected :-( > > I've attached my .config and the result of dmesg just after booting. > I've surely missed something so ask again for your kind support. > Thanks in advance for your help. > > Bruno Cornec (Bruno.Cornec@hp.com) said: > > (Distro SuSE SLES8 - kernel 2.4.21-ac2) > -------------------------------------------------------------------- > The latest BIOS has been put on the system (P44 - 2003-02-18) > -------------------------------------------------------------------- > cat /proc/cmdline : > root=/dev/cciss/c0d0p1 ide=nodma (16 CPUs) > > -------------------------------------------------------------------- > boot.msg > > Inspecting /boot/System.map > Loaded 18441 symbols from /boot/System.map. > Symbols match kernel version 2.4.21. > No module symbols loaded. > klogd 1.4.1, log source = ksyslog started. > <4>Linux version 2.4.21-ac2 (root@linux) (gcc version 3.2) #1 > SMP Tue Jun 24 11:09:11 CEST 2003 > <6>BIOS-provided physical RAM map: > <4> BIOS-e820: 0000000000000000 - 000000000009f400 (usable) > <4> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) > <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > <4> BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) > <4> BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data) > <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) > <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > <4> BIOS-e820: 0000000100000000 - 000000040ffff000 (usable) > <5>15743MB HIGHMEM available. > <5>896MB LOWMEM available. > <4>found SMP MP-table at 000f4fd0 > <4>hm, page 000f4000 reserved twice. > <4>hm, page 000f5000 reserved twice. > <4>hm, page 000f7000 reserved twice. > <4>hm, page 000f8000 reserved twice. > <4>On node 0 totalpages: 4259839 > <4>zone(0): 4096 pages. > <4>zone(1): 225280 pages. > <4>zone(2): 4030463 pages. > <4>Intel MultiProcessor Specification v1.4 > <4> Virtual Wire compatibility mode. > <4>OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 > <4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #2 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #4 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #6 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #8 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #10 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #12 Pentium 4(tm) XEON(tm) APIC version 20 > <4>Processor #14 Pentium 4(tm) XEON(tm) APIC version 20 > <4>I/O APIC #8 Version 17 at 0xFEC00000. > <4>I/O APIC #9 Version 17 at 0xFEC01000. > <4>I/O APIC #10 Version 17 at 0xFEC02000. > <4>Processors: 8 > <4>xAPIC support is present > <4>Enabling APIC mode: Flat. Using 3 I/O APICs > <4>Kernel command line: root=/dev/cciss/c0d0p1 ide=nodma > <6>ide_setup: ide=nodma : Prevented DMA > <6>Initializing CPU#0 > <4>Detected 1999.337 MHz processor. > <4>Console: colour VGA+ 80x25 > <4>Calibrating delay loop... 3984.58 BogoMIPS > <6>Memory: 16573608k/17039356k available (1617k kernel code, > 203152k reserved, 376k data, 288k init, 15859644k highmem) > <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > <6>Inode cache hash table entries: 262144 (order: 9, 2097152 bytes) > <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) > <6>Buffer cache hash table entries: 524288 (order: 9, 2097152 bytes) > <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 0 > <6>Intel machine check architecture supported. > <6>Intel machine check reporting enabled on CPU#0. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <6>Enabling fast FPU save and restore... done. > <6>Enabling unmasked SIMD FPU exception support... done. > <6>Checking 'hlt' instruction... OK. > <4>POSIX conformance testing by UNIFIX > <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) > <4>mtrr: detected mtrr type: Intel > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 0 > <6>Intel machine check reporting enabled on CPU#0. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>per-CPU timeslice cutoff: 1462.74 usecs. > <4>task migration cache decay timeout: 10 msecs. > <4>enabled ExtINT on CPU#0 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Booting processor 1/2 eip 2000 > <6>Initializing CPU#1 > <4>masked ExtINT on CPU#1 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 1 > <6>Intel machine check reporting enabled on CPU#1. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 2/4 eip 2000 > <6>Initializing CPU#2 > <4>masked ExtINT on CPU#2 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 2 > <6>Intel machine check reporting enabled on CPU#2. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 3/6 eip 2000 > <6>Initializing CPU#3 > <4>masked ExtINT on CPU#3 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 3 > <6>Intel machine check reporting enabled on CPU#3. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 4/8 eip 2000 > <6>Initializing CPU#4 > <4>masked ExtINT on CPU#4 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 4 > <6>Intel machine check reporting enabled on CPU#4. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 5/10 eip 2000 > <6>Initializing CPU#5 > <4>masked ExtINT on CPU#5 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 5 > <6>Intel machine check reporting enabled on CPU#5. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 6/12 eip 2000 > <6>Initializing CPU#6 > <4>masked ExtINT on CPU#6 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 6 > <6>Intel machine check reporting enabled on CPU#6. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 7/14 eip 2000 > <6>Initializing CPU#7 > <4>masked ExtINT on CPU#7 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Physical Processor ID: 7 > <6>Intel machine check reporting enabled on CPU#7. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <6>Total of 8 processors activated (31968.46 BogoMIPS). > <4>WARNING: No sibling found for CPU 0. > <4>WARNING: No sibling found for CPU 1. > <4>WARNING: No sibling found for CPU 2. > <4>WARNING: No sibling found for CPU 3. > <4>WARNING: No sibling found for CPU 4. > <4>WARNING: No sibling found for CPU 5. > <4>WARNING: No sibling found for CPU 6. > <4>WARNING: No sibling found for CPU 7. > <4>ENABLING IO-APIC IRQs > <4>Setting 8 in the phys_id_present_map > <6>...changing IO-APIC physical APIC ID to 8 ... ok. > <4>Setting 9 in the phys_id_present_map > <6>...changing IO-APIC physical APIC ID to 9 ... ok. > <4>Setting 10 in the phys_id_present_map > <6>...changing IO-APIC physical APIC ID to 10 ... ok. > <7>init IO_APIC IRQs > <7> IO-APIC (apicid-pin) 8-0, 8-3, 8-5, 8-7, 8-11, 10-1, > 10-2, 10-4 not connected. > <6>..TIMER: vector=0x31 pin1=2 pin2=0 > <7>number of MP IRQ sources: 68. > <7>number of IO-APIC #8 registers: 16. > <7>number of IO-APIC #9 registers: 16. > <7>number of IO-APIC #10 registers: 16. > <6>testing the IO APIC....................... > <4> > <7>IO APIC #8...... > <7>.... register #00: 08000000 > <7>....... : physical APIC id: 08 > <7>....... : Delivery Type: 0 > <7>....... : LTS : 0 > <7>.... register #01: 000F0011 > <7>....... : max redirection entries: 000F > <7>....... : PRQ implemented: 0 > <7>....... : IO APIC version: 0011 > <7>.... register #02: 08000000 > <7>....... : arbitration: 08 > <7>.... IRQ redirection table: > <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > <7> 00 000 00 1 0 0 0 0 0 0 00 > <7> 01 0FF 0F 0 0 0 0 0 1 1 39 > <7> 02 040 00 0 0 0 0 0 1 1 31 > <7> 03 000 00 1 0 0 0 0 0 0 00 > <7> 04 0FF 0F 0 0 0 0 0 1 1 41 > <7> 05 000 00 1 0 0 0 0 0 0 00 > <7> 06 0FF 0F 0 0 0 0 0 1 1 49 > <7> 07 000 00 1 0 0 0 0 0 0 00 > <7> 08 0FF 0F 0 0 0 0 0 1 1 51 > <7> 09 0FF 0F 1 1 0 1 0 1 1 59 > <7> 0a 0FF 0F 1 1 0 1 0 1 1 61 > <7> 0b 000 00 1 0 0 0 0 0 0 00 > <7> 0c 0FF 0F 0 0 0 0 0 1 1 69 > <7> 0d 0FF 0F 1 1 0 1 0 1 1 71 > <7> 0e 0FF 0F 0 0 0 0 0 1 1 79 > <7> 0f 0FF 0F 0 0 0 0 0 1 1 81 > <4> > <7>IO APIC #9...... > <7>.... register #00: 09000000 > <7>....... : physical APIC id: 09 > <7>....... : Delivery Type: 0 > <7>....... : LTS : 0 > <7>.... register #01: 000F0011 > <7>....... : max redirection entries: 000F > <7>....... : PRQ implemented: 0 > <7>....... : IO APIC version: 0011 > <7>.... register #02: 09000000 > <7>....... : arbitration: 09 > <7>.... IRQ redirection table: > <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > <7> 00 0FF 0F 1 1 0 1 0 1 1 89 > <7> 01 0FF 0F 1 1 0 1 0 1 1 91 > <7> 02 0FF 0F 1 1 0 1 0 1 1 99 > <7> 03 0FF 0F 1 1 0 1 0 1 1 A1 > <7> 04 0FF 0F 1 1 0 1 0 1 1 A9 > <7> 05 0FF 0F 1 1 0 1 0 1 1 B1 > <7> 06 0FF 0F 1 1 0 1 0 1 1 B9 > <7> 07 0FF 0F 1 1 0 1 0 1 1 C1 > <7> 08 0FF 0F 1 1 0 1 0 1 1 C9 > <7> 09 0FF 0F 1 1 0 1 0 1 1 D1 > <7> 0a 0FF 0F 1 1 0 1 0 1 1 D9 > <7> 0b 0FF 0F 1 1 0 1 0 1 1 E1 > <7> 0c 0FF 0F 1 1 0 1 0 1 1 E9 > <7> 0d 0FF 0F 1 1 0 1 0 1 1 32 > <7> 0e 0FF 0F 1 1 0 1 0 1 1 3A > <7> 0f 0FF 0F 1 1 0 1 0 1 1 42 > <4> > <7>IO APIC #10...... > <7>.... register #00: 0A000000 > <7>....... : physical APIC id: 0A > <7>....... : Delivery Type: 0 > <7>....... : LTS : 0 > <7>.... register #01: 000F0011 > <7>....... : max redirection entries: 000F > <7>....... : PRQ implemented: 0 > <7>....... : IO APIC version: 0011 > <7>.... register #02: 0A000000 > <7>....... : arbitration: 0A > <7>.... IRQ redirection table: > <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > <7> 00 0FF 0F 1 1 0 1 0 1 1 4A > <7> 01 000 00 1 0 0 0 0 0 0 00 > <7> 02 000 00 1 0 0 0 0 0 0 00 > <7> 03 0FF 0F 1 1 0 1 0 1 1 52 > <7> 04 000 00 1 0 0 0 0 0 0 00 > <7> 05 0FF 0F 1 1 0 1 0 1 1 5A > <7> 06 0FF 0F 1 1 0 1 0 1 1 62 > <7> 07 0FF 0F 1 1 0 1 0 1 1 6A > <7> 08 0FF 0F 1 1 0 1 0 1 1 72 > <7> 09 0FF 0F 1 1 0 1 0 1 1 7A > <7> 0a 0FF 0F 1 1 0 1 0 1 1 82 > <7> 0b 0FF 0F 1 1 0 1 0 1 1 8A > <7> 0c 0FF 0F 1 1 0 1 0 1 1 92 > <7> 0d 0FF 0F 1 1 0 1 0 1 1 9A > <7> 0e 0FF 0F 1 1 0 1 0 1 1 A2 > <7> 0f 0FF 0F 1 1 0 1 0 1 1 AA > <7>IRQ to pin mappings: > <7>IRQ0 -> 0:2 > <7>IRQ1 -> 0:1 > <7>IRQ4 -> 0:4 > <7>IRQ6 -> 0:6 > <7>IRQ8 -> 0:8 > <7>IRQ9 -> 0:9 > <7>IRQ10 -> 0:10 > <7>IRQ12 -> 0:12 > <7>IRQ13 -> 0:13 > <7>IRQ14 -> 0:14 > <7>IRQ15 -> 0:15 > <7>IRQ16 -> 1:0 > <7>IRQ17 -> 1:1 > <7>IRQ18 -> 1:2 > <7>IRQ19 -> 1:3 > <7>IRQ20 -> 1:4 > <7>IRQ21 -> 1:5 > <7>IRQ22 -> 1:6 > <7>IRQ23 -> 1:7 > <7>IRQ24 -> 1:8 > <7>IRQ25 -> 1:9 > <7>IRQ26 -> 1:10 > <7>IRQ27 -> 1:11 > <7>IRQ28 -> 1:12 > <7>IRQ29 -> 1:13 > <7>IRQ30 -> 1:14 > <7>IRQ31 -> 1:15 > <7>IRQ32 -> 2:0 > <7>IRQ35 -> 2:3 > <7>IRQ37 -> 2:5 > <7>IRQ38 -> 2:6 > <7>IRQ39 -> 2:7 > <7>IRQ40 -> 2:8 > <7>IRQ41 -> 2:9 > <7>IRQ42 -> 2:10 > <7>IRQ43 -> 2:11 > <7>IRQ44 -> 2:12 > <7>IRQ45 -> 2:13 > <7>IRQ46 -> 2:14 > <7>IRQ47 -> 2:15 > <6>.................................... done. > <4>Using local APIC timer interrupts. > <4>calibrating APIC timer ... > <4>..... CPU clock speed is 1999.1451 MHz. > <4>..... host bus clock speed is 99.9571 MHz. > <4>cpu: 0, clocks: 999571, slice: 111063 > <4>CPU0<T0:999568,T1:888496,D:9,S:111063,C:999571> > <4>cpu: 1, clocks: 999571, slice: 111063 > <4>cpu: 2, clocks: 999571, slice: 111063 > <4>cpu: 3, clocks: 999571, slice: 111063 > <4>cpu: 6, clocks: 999571, slice: 111063 > <4>cpu: 4, clocks: 999571, slice: 111063 > <4>cpu: 7, clocks: 999571, slice: 111063 > <4>cpu: 5, clocks: 999571, slice: 111063 > <4>CPU2<T0:999568,T1:666368,D:11,S:111063,C:999571> > <4>CPU1<T0:999568,T1:777440,D:2,S:111063,C:999571> > <4>CPU3<T0:999568,T1:555312,D:4,S:111063,C:999571> > <4>CPU5<T0:999568,T1:333184,D:6,S:111063,C:999571> > <4>CPU4<T0:999568,T1:444240,D:13,S:111063,C:999571> > <4>CPU6<T0:999568,T1:222112,D:15,S:111063,C:999571> > <4>CPU7<T0:999568,T1:111056,D:8,S:111063,C:999571> > <4>migration_task 0 on cpu=0 > <4>migration_task 1 on cpu=1 > <4>migration_task 2 on cpu=2 > <4>migration_task 3 on cpu=3 > <4>migration_task 4 on cpu=4 > <4>migration_task 5 on cpu=5 > <4>migration_task 6 on cpu=6 > <4>migration_task 7 on cpu=7 > <6>PCI: PCI BIOS revision 2.10 entry at 0xf1135, last bus=22 > <6>PCI: Using configuration type 1 > <6>PCI: Probing PCI hardware > <4>PCI: Probing PCI hardware (bus 00) > <6>PCI: Ignoring BAR0-3 of IDE controller 00:0f.1 > <6>PCI: Discovered primary peer bus 03 [IRQ] > <6>PCI: Discovered primary peer bus 07 [IRQ] > <6>PCI: Discovered primary peer bus 0b [IRQ] > <6>PCI: Discovered primary peer bus 0f [IRQ] > <6>PCI: Discovered primary peer bus 13 [IRQ] > <6>PCI->APIC IRQ transform: (B0,I12,P0) -> 37 > <6>PCI->APIC IRQ transform: (B0,I13,P0) -> 41 > <6>PCI->APIC IRQ transform: (B0,I14,P0) -> 40 > <6>PCI->APIC IRQ transform: (B0,I15,P0) -> 10 > <6>PCI->APIC IRQ transform: (B0,I16,P0) -> 39 > <6>PCI->APIC IRQ transform: (B0,I16,P1) -> 32 > <6>PCI->APIC IRQ transform: (B0,I16,P2) -> 38 > <6>PCI->APIC IRQ transform: (B0,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B3,I2,P0) -> 43 > <6>PCI->APIC IRQ transform: (B3,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B7,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B11,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B15,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B19,I30,P0) -> 35 > <4>PCI: Device 00:78 not found by BIOS > <4>PCI: Device 00:7b not found by BIOS > <4>PCI: Device 00:b8 not found by BIOS > <4>PCI: Device 00:c0 not found by BIOS > <4>PCI: Device 00:c2 not found by BIOS > <4>PCI: Device 00:c4 not found by BIOS > <4>PCI: Device 00:c6 not found by BIOS > <4>PCI: Device 00:c8 not found by BIOS > <4>PCI: Device 00:ca not found by BIOS > <6>Linux NET4.0 for Linux 2.4 > <6>Based upon Swansea University Computer Society NET3.039 > <4>Initializing RT netlink socket > <4>Starting kswapd > <4>allocated 32 pages and 32 bhs reserved for the highmem bounces > <6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > <4>pty: 256 Unix98 ptys configured > <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS > SHARE_IRQ SERIAL_PCI enabled > <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A > <6>Floppy drive(s): fd0 is 1.44M > <6>FDC 0 is a National Semiconductor PC87306 > <6>loop: loaded (max 8 devices) > <6>HP CISS Driver (v 2.4.44) > <7>cciss: Device 0xb178 has been found at bus 0 dev 14 func 0 > <6> blocks= 35553120 block_size= 512 > <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) > <4> > <6> blocks= 35553120 block_size= 512 > <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) > <4> > <4>blk: queue c03a8b60, I/O limit 4294967295Mb (mask > 0xffffffffffffffff) > <6>Partition check: > <6> cciss/c0d0: p1 p2 p3 p4 < p5 p6 > > <6> cciss/c0d1: p1 > [...] > -------------------------------------------------------------------- > > The corresponding .config is: > -------------------------------------------------------------------- > # > # Automatically generated make config: don't edit > # > CONFIG_X86=y > # CONFIG_SBUS is not set > CONFIG_UID16=y > > # > # Code maturity level options > # > # CONFIG_EXPERIMENTAL is not set > > # > # Loadable module support > # > CONFIG_MODULES=y > # CONFIG_MODVERSIONS is not set > CONFIG_KMOD=y > > # > # Processor type and features > # > # CONFIG_M386 is not set > # CONFIG_M486 is not set > # CONFIG_M586 is not set > # CONFIG_M586TSC is not set > # CONFIG_M586MMX is not set > # CONFIG_M686 is not set > CONFIG_MPENTIUMIII=y > # CONFIG_MPENTIUM4 is not set > # CONFIG_MK6 is not set > # CONFIG_MK7 is not set > # CONFIG_MK8 is not set > # CONFIG_MELAN is not set > # CONFIG_MCRUSOE is not set > # CONFIG_MWINCHIPC6 is not set > # CONFIG_MWINCHIP2 is not set > # CONFIG_MWINCHIP3D is not set > # CONFIG_MCYRIXIII is not set > # CONFIG_MVIAC3_2 is not set > CONFIG_X86_WP_WORKS_OK=y > CONFIG_X86_INVLPG=y > CONFIG_X86_CMPXCHG=y > CONFIG_X86_XADD=y > CONFIG_X86_BSWAP=y > CONFIG_X86_POPAD_OK=y > # CONFIG_RWSEM_GENERIC_SPINLOCK is not set > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_X86_L1_CACHE_SHIFT=5 > CONFIG_X86_HAS_TSC=y > CONFIG_X86_GOOD_APIC=y > CONFIG_X86_PGE=y > CONFIG_X86_USE_PPRO_CHECKSUM=y > CONFIG_X86_F00F_WORKS_OK=y > CONFIG_X86_MCE=y > > # > # CPU Frequency scaling > # > # CONFIG_CPU_FREQ is not set > # CONFIG_TOSHIBA is not set > # CONFIG_I8K is not set > # CONFIG_MICROCODE is not set > # CONFIG_X86_MSR is not set > # CONFIG_X86_CPUID is not set > # CONFIG_NOHIGHMEM is not set > # CONFIG_HIGHMEM4G is not set > CONFIG_HIGHMEM64G=y > CONFIG_HIGHMEM=y > CONFIG_X86_PAE=y > CONFIG_HIGHIO=y > # CONFIG_MATH_EMULATION is not set > CONFIG_MTRR=y > CONFIG_SMP=y > CONFIG_X86_CLUSTERED_APIC=y > # CONFIG_X86_NUMA is not set > # CONFIG_X86_TSC_DISABLE is not set > CONFIG_X86_TSC=y > CONFIG_HAVE_DEC_LOCK=y > > # > # General setup > # > CONFIG_NET=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_LOCAL_APIC=y > CONFIG_PCI=y > # CONFIG_PCI_GOBIOS is not set > # CONFIG_PCI_GODIRECT is not set > CONFIG_PCI_GOANY=y > CONFIG_PCI_BIOS=y > CONFIG_PCI_DIRECT=y > # CONFIG_ISA is not set > # CONFIG_SCx200 is not set > CONFIG_PCI_NAMES=y > # CONFIG_EISA is not set > # CONFIG_MCA is not set > # CONFIG_HOTPLUG is not set > # CONFIG_PCMCIA is not set > # CONFIG_HOTPLUG_PCI is not set > CONFIG_SYSVIPC=y > # CONFIG_BSD_PROCESS_ACCT is not set > CONFIG_SYSCTL=y > CONFIG_KCORE_ELF=y > # CONFIG_KCORE_AOUT is not set > # CONFIG_BINFMT_AOUT is not set > CONFIG_BINFMT_ELF=y > # CONFIG_BINFMT_MISC is not set > # CONFIG_IKCONFIG is not set > # CONFIG_PM is not set > # CONFIG_APM_IGNORE_USER_SUSPEND is not set > # CONFIG_APM_DO_ENABLE is not set > # CONFIG_APM_CPU_IDLE is not set > # CONFIG_APM_DISPLAY_BLANK is not set > # CONFIG_APM_RTC_IS_GMT is not set > # CONFIG_APM_ALLOW_INTS is not set > # CONFIG_APM_REAL_MODE_POWER_OFF is not set > > # > # ACPI Support > # > # CONFIG_ACPI is not set > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > # CONFIG_PARPORT is not set > > # > # Plug and Play configuration > # > # CONFIG_PNP is not set > > # > # Block devices > # > CONFIG_BLK_DEV_FD=y > # CONFIG_BLK_CPQ_DA is not set > CONFIG_BLK_CPQ_CISS_DA=y > # CONFIG_CISS_SCSI_TAPE is not set > # CONFIG_BLK_DEV_DAC960 is not set > CONFIG_BLK_DEV_LOOP=y > CONFIG_BLK_DEV_NBD=m > CONFIG_BLK_DEV_RAM=m > CONFIG_BLK_DEV_RAM_SIZE=4096 > # CONFIG_BLK_STATS is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Networking options > # > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > # CONFIG_NETLINK_DEV is not set > # CONFIG_NETFILTER is not set > # CONFIG_FILTER is not set > CONFIG_UNIX=y > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > # CONFIG_IP_PNP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_IP_MROUTE is not set > # CONFIG_INET_ECN is not set > # CONFIG_SYN_COOKIES is not set > # CONFIG_VLAN_8021Q is not set > > # > # > # > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > > # > # Appletalk devices > # > # CONFIG_DECNET is not set > # CONFIG_BRIDGE is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # ATA/IDE/MFM/RLL support > # > CONFIG_IDE=y > > # > # IDE, ATA and ATAPI Block devices > # > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on IDE drives > # > # CONFIG_BLK_DEV_HD_IDE is not set > # CONFIG_BLK_DEV_HD is not set > CONFIG_BLK_DEV_IDEDISK=y > CONFIG_IDEDISK_MULTI_MODE=y > # CONFIG_IDEDISK_STROKE is not set > CONFIG_BLK_DEV_IDECD=y > # CONFIG_BLK_DEV_IDETAPE is not set > # CONFIG_BLK_DEV_IDEFLOPPY is not set > # CONFIG_BLK_DEV_IDESCSI is not set > # CONFIG_IDE_TASK_IOCTL is not set > > # > # IDE chipset support/bugfixes > # > CONFIG_BLK_DEV_CMD640=y > # CONFIG_BLK_DEV_CMD640_ENHANCED is not set > CONFIG_BLK_DEV_IDEPCI=y > # CONFIG_BLK_DEV_GENERIC is not set > CONFIG_IDEPCI_SHARE_IRQ=y > CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_OFFBOARD is not set > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_BLK_DEV_ADMA100 is not set > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > # CONFIG_BLK_DEV_AMD74XX is not set > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > CONFIG_BLK_DEV_PIIX=y > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > # CONFIG_BLK_DEV_PDC202XX_NEW is not set > CONFIG_BLK_DEV_RZ1000=y > # CONFIG_BLK_DEV_SC1200 is not set > CONFIG_BLK_DEV_SVWKS=y > # CONFIG_BLK_DEV_SIIMAGE is not set > # CONFIG_BLK_DEV_SIS5513 is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_IDEDMA_IVB is not set > # CONFIG_DMA_NONPCI is not set > CONFIG_BLK_DEV_IDE_MODES=y > > # > # SCSI support > # > CONFIG_SCSI=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=y > CONFIG_SD_EXTRA_DEVS=40 > CONFIG_CHR_DEV_ST=m > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > CONFIG_CHR_DEV_SG=m > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > CONFIG_SCSI_DEBUG_QUEUES=y > CONFIG_SCSI_MULTI_LUN=y > CONFIG_SCSI_CONSTANTS=y > # CONFIG_SCSI_LOGGING is not set > > # > # SCSI low-level drivers > # > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_7000FASST is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AHA152X is not set > # CONFIG_SCSI_AHA1542 is not set > # CONFIG_SCSI_AHA1740 is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_DPT_I2O is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_SCSI_IN2000 is not set > # CONFIG_SCSI_AM53C974 is not set > # CONFIG_SCSI_MEGARAID is not set > # CONFIG_SCSI_MEGARAID2 is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_CPQFCTS is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_DTC3280 is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_EATA_DMA is not set > # CONFIG_SCSI_EATA_PIO is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_GENERIC_NCR5380 is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_NCR53C406A is not set > # CONFIG_SCSI_NCR53C7xx is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_NCR53C8XX is not set > # CONFIG_SCSI_SYM53C8XX is not set > # CONFIG_SCSI_PAS16 is not set > # CONFIG_SCSI_PCI2000 is not set > # CONFIG_SCSI_PCI2220I is not set > # CONFIG_SCSI_PSI240I is not set > # CONFIG_SCSI_QLOGIC_FAS is not set > # CONFIG_SCSI_QLOGIC_ISP is not set > # CONFIG_SCSI_QLOGIC_FC is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > # CONFIG_SCSI_SEAGATE is not set > # CONFIG_SCSI_SIM710 is not set > # CONFIG_SCSI_SYM53C416 is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_T128 is not set > # CONFIG_SCSI_U14_34F is not set > # CONFIG_SCSI_ULTRASTOR is not set > # CONFIG_SCSI_NSP32 is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > # CONFIG_FUSION_BOOT is not set > # CONFIG_FUSION_ISENSE is not set > # CONFIG_FUSION_CTL is not set > # CONFIG_FUSION_LAN is not set > > # > # I2O device support > # > # CONFIG_I2O is not set > > # > # Network device support > # > CONFIG_NETDEVICES=y > > # > # ARCnet devices > # > # CONFIG_ARCNET is not set > CONFIG_DUMMY=m > CONFIG_BONDING=m > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > > # > # Ethernet (10 or 100Mbit) > # > # CONFIG_NET_ETHERNET is not set > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_E1000 is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_R8169 is not set > # CONFIG_SK98LIN is not set > CONFIG_TIGON3=y > # CONFIG_FDDI is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > > # > # Wireless LAN (non-hamradio) > # > # CONFIG_NET_RADIO is not set > > # > # Token Ring devices > # > # CONFIG_TR is not set > # CONFIG_NET_FC is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > > # > # Amateur Radio support > # > # CONFIG_HAMRADIO is not set > > # > # IrDA (infrared) support > # > # CONFIG_IRDA is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Input core support > # > # CONFIG_INPUT is not set > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_SERIAL=y > # CONFIG_SERIAL_CONSOLE is not set > # CONFIG_SERIAL_EXTENDED is not set > # CONFIG_SERIAL_NONSTANDARD is not set > CONFIG_UNIX98_PTYS=y > CONFIG_UNIX98_PTY_COUNT=256 > # CONFIG_HVC_CONSOLE is not set > > # > # I2C support > # > # CONFIG_I2C is not set > > # > # Mice > # > # CONFIG_BUSMOUSE is not set > CONFIG_MOUSE=y > CONFIG_PSMOUSE=y > # CONFIG_82C710_MOUSE is not set > # CONFIG_PC110_PAD is not set > # CONFIG_MK712_MOUSE is not set > > # > # Joysticks > # > # CONFIG_INPUT_GAMEPORT is not set > > # > # Input core support is needed for gameports > # > > # > # Input core support is needed for joysticks > # > # CONFIG_QIC02_TAPE is not set > # CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > # CONFIG_AMD_RNG is not set > # CONFIG_INTEL_RNG is not set > # CONFIG_AMD_PM768 is not set > # CONFIG_NVRAM is not set > # CONFIG_RTC is not set > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > > # > # Ftape, the floppy tape device driver > # > # CONFIG_FTAPE is not set > # CONFIG_AGP is not set > # CONFIG_DRM is not set > # CONFIG_MWAVE is not set > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # File systems > # > # CONFIG_QUOTA is not set > # CONFIG_AUTOFS_FS is not set > CONFIG_AUTOFS4_FS=y > CONFIG_REISERFS_FS=y > # CONFIG_REISERFS_CHECK is not set > CONFIG_REISERFS_PROC_INFO=y > CONFIG_EXT3_FS=m > CONFIG_JBD=m > # CONFIG_JBD_DEBUG is not set > CONFIG_FAT_FS=m > CONFIG_MSDOS_FS=m > # CONFIG_UMSDOS_FS is not set > CONFIG_VFAT_FS=m > # CONFIG_CRAMFS is not set > CONFIG_TMPFS=y > CONFIG_RAMFS=y > CONFIG_ISO9660_FS=y > # CONFIG_JOLIET is not set > # CONFIG_ZISOFS is not set > # CONFIG_JFS_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_NTFS_FS is not set > # CONFIG_HPFS_FS is not set > CONFIG_PROC_FS=y > CONFIG_DEVPTS_FS=y > # CONFIG_QNX4FS_FS is not set > # CONFIG_ROMFS_FS is not set > CONFIG_EXT2_FS=y > # CONFIG_SYSV_FS is not set > # CONFIG_UDF_FS is not set > # CONFIG_UFS_FS is not set > # CONFIG_XFS_FS is not set > > # > # Network File Systems > # > # CONFIG_CODA_FS is not set > CONFIG_NFS_FS=y > CONFIG_NFS_V3=y > CONFIG_NFSD=y > CONFIG_NFSD_V3=y > CONFIG_SUNRPC=y > CONFIG_LOCKD=y > CONFIG_LOCKD_V4=y > CONFIG_SMB_FS=m > # CONFIG_SMB_NLS_DEFAULT is not set > # CONFIG_NCP_FS is not set > # CONFIG_ZISOFS_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > CONFIG_SMB_NLS=y > CONFIG_NLS=y > > # > # Native Language Support > # > CONFIG_NLS_DEFAULT="iso8859-1" > # CONFIG_NLS_CODEPAGE_437 is not set > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > # CONFIG_NLS_ISO8859_1 is not set > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > # CONFIG_NLS_ISO8859_15 is not set > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > # CONFIG_NLS_UTF8 is not set > > # > # Console drivers > # > CONFIG_VGA_CONSOLE=y > # CONFIG_VIDEO_SELECT is not set > > # > # Sound > # > # CONFIG_SOUND is not set > > # > # USB support > # > # CONFIG_USB is not set > > # > # Bluetooth support > # > # CONFIG_BLUEZ is not set > > # > # Kernel hacking > # > CONFIG_DEBUG_KERNEL=y > # CONFIG_DEBUG_STACKOVERFLOW is not set > # CONFIG_FRAME_POINTER is not set > # CONFIG_DEBUG_HIGHMEM is not set > # CONFIG_DEBUG_SLAB is not set > # CONFIG_DEBUG_IOVIRT is not set > CONFIG_MAGIC_SYSRQ=y > # CONFIG_PANIC_MORSE is not set > # CONFIG_DEBUG_SPINLOCK is not set > > # > # Library routines > # > # CONFIG_CRC32 is not set > # CONFIG_ZLIB_INFLATE is not set > # CONFIG_ZLIB_DEFLATE is not set > -------------------------------------------------------------------- > -- > Linux Solution Consultant Tél: +33 476 143 278 - Fax: > +33 476 146 105 > HP/Intel Solution Center http://hpintelco.net Hewlett-Packard > Grenoble/France > Des infos sur Linux? http://www.HyPer-Linux.org http://www.hp.com/linux La musique ancienne? http://www.musique-ancienne.org http://www.medieval.org ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading 2003-06-26 16:29 ` PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading Pallipadi, Venkatesh @ 2003-06-27 7:27 ` Bruno Cornec [not found] ` <C8C38546F90ABF408A5961FC01FDBF1901048859@fmsmsx405.fm.intel.com> 0 siblings, 1 reply; 5+ messages in thread From: Bruno Cornec @ 2003-06-27 7:27 UTC (permalink / raw) To: Pallipadi, Venkatesh; +Cc: linux-kernel, sophie.pasquier Pallipadi, Venkatesh (venkatesh.pallipadi@intel.com) said: > Can you enable ACPI in the config and try again. With that you should be able to see all the processors. > Ok, I did it. Now the kernel just boots and doesn't go any further cmdline is just with ide=nodma (Only the first line indicating that the kernel is booting appears on the screen). Bruno. -- Linux Solution Consultant Tél: +33 476 143 278 - Fax: +33 476 146 105 HP/Intel Solution Center http://hpintelco.net Hewlett-Packard Grenoble/France Des infos sur Linux? http://www.HyPer-Linux.org http://www.hp.com/linux La musique ancienne? http://www.musique-ancienne.org http://www.medieval.org ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <C8C38546F90ABF408A5961FC01FDBF1901048859@fmsmsx405.fm.intel.com>]
[parent not found: <20030626161021.E9969@morley.grenoble.hp.com>]
* PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading @ 2003-06-17 17:24 ` Bruno Cornec 2003-06-26 14:07 ` Bruno Cornec 0 siblings, 1 reply; 5+ messages in thread From: Bruno Cornec @ 2003-06-17 17:24 UTC (permalink / raw) To: linux-kernel; +Cc: sophie.pasquier, bruno.cornec Hello, First this is my first mail on that mailing-list so even if I try reading all the guidelines before posting, I may have missed some, as I'm not reading it regularly but only through kernel-traffic. [So please keep the Cc: if you answer to that mail] PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading (HT) When activating HT on the machine in the BIOS, the system boots correctly as it seems (detecting the 16 CPUs it should detect) but then it hangs during the remaining phases of the boot (before launching the X session generally). Whatever the runlevel (S, 2, 3, 4), results is the same. The base distribution is SLES 8. So I tried first their kernel (k_smp-2.4.19-113), then their updated kernel (k_smp-2.4.19-257), then a RedHat kernel (2.4.20-18.9bigmem), then a std 2.4.21 kernel, with always the same result, soon or less a hang. No other messages at the console. The same machines with the same kernels without HT enabled in BIOS works like a charm. Tests were made initialy with 24 GB of RAM, then with 4 GB of RAM, just to be in a safe conf. Here are some more precise info: -------------------------------------------------------------------- The latest BIOS has been put on the system (P44 - 2003-02-18) -------------------------------------------------------------------- cat /proc/cmdline : root=/dev/cciss/c0d0p1 ide=nodma apm=off acpi=off (8 CPUs) root=/dev/cciss/c0d0p1 ide=nodma apm=off acpi=off noapic (16 CPUs) The noapic option seems mandatory as the system does a kernel panic without it in HT mode due to errors in IO-APIC. -------------------------------------------------------------------- cat /proc/cpuinfo (8 CPUs) : processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) XEON(TM) MP CPU 2.00GHz stepping : 2 cpu MHz : 1999.320 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3984.58 processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) XEON(TM) MP CPU 2.00GHz stepping : 2 cpu MHz : 1999.320 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3997.69 processor : 2 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) XEON(TM) MP CPU 2.00GHz stepping : 2 cpu MHz : 1999.320 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3997.69 processor : 3 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) XEON(TM) MP CPU 2.00GHz stepping : 2 cpu MHz : 1999.320 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3997.69 processor : 4 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) XEON(TM) MP CPU 2.00GHz stepping : 2 cpu MHz : 1999.320 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3997.69 processor : 5 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) XEON(TM) MP CPU 2.00GHz stepping : 2 cpu MHz : 1999.320 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3997.69 processor : 6 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) XEON(TM) MP CPU 2.00GHz stepping : 2 cpu MHz : 1999.320 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3997.69 processor : 7 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) XEON(TM) MP CPU 2.00GHz stepping : 2 cpu MHz : 1999.320 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3997.69 -------------------------------------------------------------------- boot.log (8 CPU - without noapic ) Inspecting /boot/System.map Loaded 18066 symbols from /boot/System.map. Symbols match kernel version 2.4.21. No module symbols loaded. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.21 (root@linux) (gcc version 3.2) #3 SMP Tue Jun 17 17:32:56 CEST 2003 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009f400 (usable) <4> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) <4> BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data) <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) <4> BIOS-e820: 0000000100000000 - 000000010ffff000 (usable) <5>3455MB HIGHMEM available. <5>896MB LOWMEM available. <4>found SMP MP-table at 000f4fd0 <4>hm, page 000f4000 reserved twice. <4>hm, page 000f5000 reserved twice. <4>hm, page 000f7000 reserved twice. <4>hm, page 000f8000 reserved twice. <4>On node 0 totalpages: 1114111 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 884735 pages. <6>ACPI: Searched entire block, no RSDP was found. <6>ACPI: RSDP located at physical address c00f4f70 <6>RSD PTR v0 [HP ] <4>__va_range(0xefff0000, 0x68): idx=8 mapped at ffff6000 <6>ACPI table found: RSDT v1 [HP P44 0.1] <4>__va_range(0xefff0040, 0x24): idx=8 mapped at ffff6000 <4>__va_range(0xefff0040, 0x74): idx=8 mapped at ffff6000 <6>ACPI table found: FACP v1 [HP P44 0.1] <4>__va_range(0xefff0100, 0x24): idx=8 mapped at ffff6000 <4>__va_range(0xefff0100, 0xe0): idx=8 mapped at ffff6000 <6>ACPI table found: APIC v1 [HP P44 0.1] <4>__va_range(0xefff0100, 0xe0): idx=8 mapped at ffff6000 <6>LAPIC (acpi_id[0x0001] id[0x0] enabled[1]) <6>CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0002] id[0x2] enabled[1]) <6>CPU 1 (0x0200) enabledProcessor #2 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0003] id[0x4] enabled[1]) <6>CPU 2 (0x0400) enabledProcessor #4 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0004] id[0x6] enabled[1]) <6>CPU 3 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0005] id[0x8] enabled[1]) <6>CPU 4 (0x0800) enabledProcessor #8 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0006] id[0xa] enabled[1]) <6>CPU 5 (0x0a00) enabledProcessor #10 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0007] id[0xc] enabled[1]) <6>CPU 6 (0x0c00) enabledProcessor #12 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0008] id[0xe] enabled[1]) <6>CPU 7 (0x0e00) enabledProcessor #14 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0009] id[0x1] enabled[0]) <6>CPU 8 (0x0100) disabled <6>LAPIC (acpi_id[0x000a] id[0x3] enabled[0]) <6>CPU 9 (0x0300) disabled <6>LAPIC (acpi_id[0x000b] id[0x5] enabled[0]) <6>CPU 10 (0x0500) disabled <6>LAPIC (acpi_id[0x000c] id[0x7] enabled[0]) <6>CPU 11 (0x0700) disabled <6>LAPIC (acpi_id[0x000d] id[0x9] enabled[0]) <6>CPU 12 (0x0900) disabled <6>LAPIC (acpi_id[0x000e] id[0xb] enabled[0]) <6>CPU 13 (0x0b00) disabled <6>LAPIC (acpi_id[0x000f] id[0xd] enabled[0]) <6>CPU 14 (0x0d00) disabled <6>LAPIC (acpi_id[0x0010] id[0xf] enabled[0]) <6>CPU 15 (0x0f00) disabled <6>IOAPIC (id[0x8] address[0xfec00000] global_irq_base[0x0]) <6>IOAPIC (id[0x9] address[0xfec01000] global_irq_base[0x10]) <6>IOAPIC (id[0xa] address[0xfec02000] global_irq_base[0x20]) <6>INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1]) <6>LAPIC_NMI (acpi_id[0x00ff] polarity[0x0] trigger[0x0] lint[0x1]) <6>16 CPUs total <6>Local APIC address fee00000 <4>__va_range(0xefff01e0, 0x24): idx=8 mapped at ffff6000 <4>__va_range(0xefff01e0, 0x58): idx=8 mapped at ffff6000 <6>ACPI table found: SRAT v1 [HP P44 0.3] <4>__va_range(0xefff0238, 0x24): idx=8 mapped at ffff6000 <4>__va_range(0xefff0238, 0x50): idx=8 mapped at ffff6000 <6>ACPI table found: SPCR v1 [HP P44 0.1] <4>__va_range(0xefff8000, 0x24): idx=8 mapped at ffff6000 <4>__va_range(0xefff8000, 0x4fae): idx=8 mapped at ffff6000 <6>ACPI table found: SSDT v1 [HP P44 0.2] <4>Enabling the CPU's according to the ACPI table <4>Intel MultiProcessor Specification v1.4 <4> Virtual Wire compatibility mode. <4>OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 <4>I/O APIC #8 Version 17 at 0xFEC00000. <4>I/O APIC #9 Version 17 at 0xFEC01000. <4>I/O APIC #10 Version 17 at 0xFEC02000. <4>Enabling APIC mode: Flat. Using 3 I/O APICs <4>Processors: 8 <4>Kernel command line: root=/dev/cciss/c0d0p1 ide=nodma apm=off acpi=off <6>ide_setup: ide=nodma : Prevented DMA <6>Initializing CPU#0 <4>Detected 1999.320 MHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 3984.58 BogoMIPS <6>Memory: 4138352k/4456444k available (1594k kernel code, 55496k reserved, 397k data, 500k init, 3276732k highmem) <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Inode cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 524288 (order: 9, 2097152 bytes) <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>per-CPU timeslice cutoff: 1462.74 usecs. <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Booting processor 1/2 eip 2000 <6>Initializing CPU#1 <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#1. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 2/4 eip 2000 <6>Initializing CPU#2 <4>masked ExtINT on CPU#2 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#2. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 3/6 eip 2000 <6>Initializing CPU#3 <4>masked ExtINT on CPU#3 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#3. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 4/8 eip 2000 <6>Initializing CPU#4 <4>masked ExtINT on CPU#4 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#4. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 5/10 eip 2000 <6>Initializing CPU#5 <4>masked ExtINT on CPU#5 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#5. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 6/12 eip 2000 <6>Initializing CPU#6 <4>masked ExtINT on CPU#6 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#6. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 7/14 eip 2000 <6>Initializing CPU#7 <4>masked ExtINT on CPU#7 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#7. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <6>Total of 8 processors activated (31968.46 BogoMIPS). <4>ENABLING IO-APIC IRQs <3>BIOS bug, IO-APIC#0 ID 8 is already used!... <3>... fixing up to 1. (tell your hw vendor) <6>...changing IO-APIC physical APIC ID to 1 ... ok. <4>Setting 9 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 9 ... ok. <3>BIOS bug, IO-APIC#2 ID 10 is already used!... <3>... fixing up to 3. (tell your hw vendor) <6>...changing IO-APIC physical APIC ID to 3 ... ok. <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 1-0, 1-3, 1-5, 1-7, 1-11, 3-1, 3-2, 3-4 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 68. <7>number of IO-APIC #1 registers: 16. <7>number of IO-APIC #9 registers: 16. <7>number of IO-APIC #3 registers: 16. <6>testing the IO APIC....................... <4> <7>IO APIC #1...... <7>.... register #00: 01000000 <7>....... : physical APIC id: 01 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 000F0011 <7>....... : max redirection entries: 000F <7>....... : PRQ implemented: 0 <7>....... : IO APIC version: 0011 <7>.... register #02: 01000000 <7>....... : arbitration: 01 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 0FF 0F 0 0 0 0 0 1 1 39 <7> 02 0FF 0F 0 0 0 0 0 1 1 31 <7> 03 000 00 1 0 0 0 0 0 0 00 <7> 04 0FF 0F 0 0 0 0 0 1 1 41 <7> 05 000 00 1 0 0 0 0 0 0 00 <7> 06 0FF 0F 0 0 0 0 0 1 1 49 <7> 07 000 00 1 0 0 0 0 0 0 00 <7> 08 0FF 0F 0 0 0 0 0 1 1 51 <7> 09 0FF 0F 1 1 0 1 0 1 1 59 <7> 0a 0FF 0F 1 1 0 1 0 1 1 61 <7> 0b 000 00 1 0 0 0 0 0 0 00 <7> 0c 0FF 0F 0 0 0 0 0 1 1 69 <7> 0d 0FF 0F 1 1 0 1 0 1 1 71 <7> 0e 0FF 0F 0 0 0 0 0 1 1 79 <7> 0f 0FF 0F 0 0 0 0 0 1 1 81 <4> <7>IO APIC #9...... <7>.... register #00: 09000000 <7>....... : physical APIC id: 09 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 000F0011 <7>....... : max redirection entries: 000F <7>....... : PRQ implemented: 0 <7>....... : IO APIC version: 0011 <7>.... register #02: 09000000 <7>....... : arbitration: 09 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 0FF 0F 1 1 0 1 0 1 1 89 <7> 01 0FF 0F 1 1 0 1 0 1 1 91 <7> 02 0FF 0F 1 1 0 1 0 1 1 99 <7> 03 0FF 0F 1 1 0 1 0 1 1 A1 <7> 04 0FF 0F 1 1 0 1 0 1 1 A9 <7> 05 0FF 0F 1 1 0 1 0 1 1 B1 <7> 06 0FF 0F 1 1 0 1 0 1 1 B9 <7> 07 0FF 0F 1 1 0 1 0 1 1 C1 <7> 08 0FF 0F 1 1 0 1 0 1 1 C9 <7> 09 0FF 0F 1 1 0 1 0 1 1 D1 <7> 0a 0FF 0F 1 1 0 1 0 1 1 D9 <7> 0b 0FF 0F 1 1 0 1 0 1 1 E1 <7> 0c 0FF 0F 1 1 0 1 0 1 1 E9 <7> 0d 0FF 0F 1 1 0 1 0 1 1 32 <7> 0e 0FF 0F 1 1 0 1 0 1 1 3A <7> 0f 0FF 0F 1 1 0 1 0 1 1 42 <4> <7>IO APIC #3...... <7>.... register #00: 03000000 <7>....... : physical APIC id: 03 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 000F0011 <7>....... : max redirection entries: 000F <7>....... : PRQ implemented: 0 <7>....... : IO APIC version: 0011 <7>.... register #02: 03000000 <7>....... : arbitration: 03 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 0FF 0F 1 1 0 1 0 1 1 4A <7> 01 000 00 1 0 0 0 0 0 0 00 <7> 02 000 00 1 0 0 0 0 0 0 00 <7> 03 0FF 0F 1 1 0 1 0 1 1 52 <7> 04 000 00 1 0 0 0 0 0 0 00 <7> 05 0FF 0F 1 1 0 1 0 1 1 5A <7> 06 0FF 0F 1 1 0 1 0 1 1 62 <7> 07 0FF 0F 1 1 0 1 0 1 1 6A <7> 08 0FF 0F 1 1 0 1 0 1 1 72 <7> 09 0FF 0F 1 1 0 1 0 1 1 7A <7> 0a 0FF 0F 1 1 0 1 0 1 1 82 <7> 0b 0FF 0F 1 1 0 1 0 1 1 8A <7> 0c 0FF 0F 1 1 0 1 0 1 1 92 <7> 0d 0FF 0F 1 1 0 1 0 1 1 9A <7> 0e 0FF 0F 1 1 0 1 0 1 1 A2 <7> 0f 0FF 0F 1 1 0 1 0 1 1 AA <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ4 -> 0:4 <7>IRQ6 -> 0:6 <7>IRQ8 -> 0:8 <7>IRQ9 -> 0:9 <7>IRQ10 -> 0:10 <7>IRQ12 -> 0:12 <7>IRQ13 -> 0:13 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <7>IRQ16 -> 1:0 <7>IRQ17 -> 1:1 <7>IRQ18 -> 1:2 <7>IRQ19 -> 1:3 <7>IRQ20 -> 1:4 <7>IRQ21 -> 1:5 <7>IRQ22 -> 1:6 <7>IRQ23 -> 1:7 <7>IRQ24 -> 1:8 <7>IRQ25 -> 1:9 <7>IRQ26 -> 1:10 <7>IRQ27 -> 1:11 <7>IRQ28 -> 1:12 <7>IRQ29 -> 1:13 <7>IRQ30 -> 1:14 <7>IRQ31 -> 1:15 <7>IRQ32 -> 2:0 <7>IRQ35 -> 2:3 <7>IRQ37 -> 2:5 <7>IRQ38 -> 2:6 <7>IRQ39 -> 2:7 <7>IRQ40 -> 2:8 <7>IRQ41 -> 2:9 <7>IRQ42 -> 2:10 <7>IRQ43 -> 2:11 <7>IRQ44 -> 2:12 <7>IRQ45 -> 2:13 <7>IRQ46 -> 2:14 <7>IRQ47 -> 2:15 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 1999.2879 MHz. <4>..... host bus clock speed is 99.9641 MHz. <4>cpu: 0, clocks: 999641, slice: 111071 <4>CPU0<T0:999632,T1:888560,D:1,S:111071,C:999641> <4>cpu: 2, clocks: 999641, slice: 111071 <4>cpu: 3, clocks: 999641, slice: 111071 <4>cpu: 1, clocks: 999641, slice: 111071 <4>cpu: 7, clocks: 999641, slice: 111071 <4>cpu: 4, clocks: 999641, slice: 111071 <4>cpu: 6, clocks: 999641, slice: 111071 <4>cpu: 5, clocks: 999641, slice: 111071 <4>CPU1<T0:999632,T1:777488,D:2,S:111071,C:999641> <4>CPU2<T0:999632,T1:666416,D:3,S:111071,C:999641> <4>CPU3<T0:999632,T1:555344,D:4,S:111071,C:999641> <4>CPU5<T0:999632,T1:333200,D:6,S:111071,C:999641> <4>CPU4<T0:999632,T1:444272,D:5,S:111071,C:999641> <4>CPU6<T0:999632,T1:222128,D:7,S:111071,C:999641> <4>CPU7<T0:999632,T1:111056,D:8,S:111071,C:999641> <4>checking TSC synchronization across CPUs: <4>BIOS BUG: CPU#0 improperly initialized, has -2 usecs TSC skew! FIXED. <4>BIOS BUG: CPU#2 improperly initialized, has -2 usecs TSC skew! FIXED. <4>BIOS BUG: CPU#3 improperly initialized, has 4 usecs TSC skew! FIXED. <4>BIOS BUG: CPU#6 improperly initialized, has 2 usecs TSC skew! FIXED. <4>Waiting on wait_init_idle (map = 0xfe) <4>All processors have done init_idle <6>PCI: PCI BIOS revision 2.10 entry at 0xf1135, last bus=22 <6>PCI: Using configuration type 1 <6>PCI: Probing PCI hardware <6>PCI: Ignoring BAR0-3 of IDE controller 00:0f.1 <6>PCI: Discovered primary peer bus 03 [IRQ] <6>PCI: Discovered primary peer bus 07 [IRQ] <6>PCI: Discovered primary peer bus 0b [IRQ] <6>PCI: Discovered primary peer bus 0f [IRQ] <6>PCI: Discovered primary peer bus 13 [IRQ] <6>PCI->APIC IRQ transform: (B0,I12,P0) -> 37 <6>PCI->APIC IRQ transform: (B0,I13,P0) -> 41 <6>PCI->APIC IRQ transform: (B0,I14,P0) -> 40 <6>PCI->APIC IRQ transform: (B0,I15,P0) -> 10 <6>PCI->APIC IRQ transform: (B0,I16,P0) -> 39 <6>PCI->APIC IRQ transform: (B0,I16,P1) -> 32 <6>PCI->APIC IRQ transform: (B0,I16,P2) -> 38 <6>PCI->APIC IRQ transform: (B0,I30,P0) -> 35 <6>PCI->APIC IRQ transform: (B3,I2,P0) -> 43 <6>PCI->APIC IRQ transform: (B3,I30,P0) -> 35 <6>PCI->APIC IRQ transform: (B7,I30,P0) -> 35 <6>PCI->APIC IRQ transform: (B11,I30,P0) -> 35 <6>PCI->APIC IRQ transform: (B15,I30,P0) -> 35 <6>PCI->APIC IRQ transform: (B19,I30,P0) -> 35 <4>PCI: Device 00:78 not found by BIOS <4>PCI: Device 00:7b not found by BIOS <4>PCI: Device 00:b8 not found by BIOS <4>PCI: Device 00:c0 not found by BIOS <4>PCI: Device 00:c2 not found by BIOS <4>PCI: Device 00:c4 not found by BIOS <4>PCI: Device 00:c6 not found by BIOS <4>PCI: Device 00:c8 not found by BIOS <4>PCI: Device 00:ca not found by BIOS <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <4>Starting kswapd <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a National Semiconductor PC87306 <6>loop: loaded (max 8 devices) <6>HP CISS Driver (v 2.4.42) <7>cciss: Device 0xb178 has been found at bus 0 dev 14 func 0 <4>cciss: using DAC cycles <6> blocks= 35553120 block_size= 512 <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) <4> <6> blocks= 35553120 block_size= 512 <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) <4> <4>blk: queue c03d1000, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <6>Partition check: <6> cciss/c0d0: p1 p2 p3 p4 < p5 p6 > <6> cciss/c0d1: p1 <6>tg3.c:v1.5 (March 21, 2003) <6>eth0: Tigon3 [partno(284685-003) rev 0105 PHY(5701)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0b:cd:52:3d:68 <6>bonding.c:v2.4.20-20030320 (March 20, 2003) <3>bonding_init(): either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. <6>bond0 registered without MII link monitoring, in load balancing (round-robin) mode. <6>bond0 registered without ARP monitoring <6>Linux agpgart interface v0.99 (c) Jeff Hartmann <6>agpgart: Maximum main memory to use for agp memory: 203M <7>agpgart: no supported devices found. <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>SvrWks CSB5: IDE controller at PCI slot 00:0f.1 <6>SvrWks CSB5: chipset revision 147 <6>SvrWks CSB5: not 100%% native mode: will probe irqs later <6>SvrWks CSB5: simplex device: DMA forced <6> ide0: BM-DMA at 0x2820-0x2827, BIOS settings: hda:pio, hdb:pio <6>SvrWks CSB5: simplex device: DMA forced <6> ide1: BM-DMA at 0x2828-0x282f, BIOS settings: hdc:pio, hdd:pio <4>hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive <4>hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } <4>hda: set_drive_speed_status: error=0x04 <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>hda: attached ide-cdrom driver. <6>hda: ATAPI 24X CD-ROM drive, 128kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 65536 buckets, 512Kbytes <6>TCP: Hash tables configured (established 262144 bind 65536) <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <4>reiserfs: checking transaction log (device 68:01) ... <4>reiserfs: replayed 6 transactions in 0 seconds <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>VFS: Mounted root (reiserfs filesystem) readonly. <6>Freeing unused kernel memory: 500k freed <6>Adding Swap: 2097136k swap-space (priority 42) <4>reiserfs: checking transaction log (device 68:11) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>reiserfs: checking transaction log (device 68:06) ... <4>reiserfs: replayed 3 transactions in 0 seconds <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>reiserfs: checking transaction log (device 68:02) ... <4>reiserfs: replayed 5 transactions in 0 seconds <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>reiserfs: checking transaction log (device 68:03) ... <4>reiserfs: replayed 3 transactions in 0 seconds <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 -------------------------------------------------------------------- Of course I've seen the messages: <3>BIOS bug, IO-APIC#0 ID 8 is already used!... <3>... fixing up to 1. (tell your hw vendor) This is where without noapic the system hangs in HT mode. are they better solutions to allow HT to work than noapic ? -------------------------------------------------------------------- boot.log (8 CPU - with noapic which is the potion used for HT) Inspecting /boot/System.map Loaded 18066 symbols from /boot/System.map. Symbols match kernel version 2.4.21. No module symbols loaded. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.21 (root@linux) (gcc version 3.2) #3 SMP Tue Jun 17 17:32:56 CEST 2003 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009f400 (usable) <4> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) <4> BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data) <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) <4> BIOS-e820: 0000000100000000 - 000000010ffff000 (usable) <5>3455MB HIGHMEM available. <5>896MB LOWMEM available. <4>found SMP MP-table at 000f4fd0 <4>hm, page 000f4000 reserved twice. <4>hm, page 000f5000 reserved twice. <4>hm, page 000f7000 reserved twice. <4>hm, page 000f8000 reserved twice. <4>On node 0 totalpages: 1114111 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 884735 pages. <6>ACPI: Searched entire block, no RSDP was found. <6>ACPI: RSDP located at physical address c00f4f70 <6>RSD PTR v0 [HP ] <4>__va_range(0xefff0000, 0x68): idx=8 mapped at ffff6000 <6>ACPI table found: RSDT v1 [HP P44 0.1] <4>__va_range(0xefff0040, 0x24): idx=8 mapped at ffff6000 <4>__va_range(0xefff0040, 0x74): idx=8 mapped at ffff6000 <6>ACPI table found: FACP v1 [HP P44 0.1] <4>__va_range(0xefff0100, 0x24): idx=8 mapped at ffff6000 <4>__va_range(0xefff0100, 0xe0): idx=8 mapped at ffff6000 <6>ACPI table found: APIC v1 [HP P44 0.1] <4>__va_range(0xefff0100, 0xe0): idx=8 mapped at ffff6000 <6>LAPIC (acpi_id[0x0001] id[0x0] enabled[1]) <6>CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0002] id[0x2] enabled[1]) <6>CPU 1 (0x0200) enabledProcessor #2 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0003] id[0x4] enabled[1]) <6>CPU 2 (0x0400) enabledProcessor #4 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0004] id[0x6] enabled[1]) <6>CPU 3 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0005] id[0x8] enabled[1]) <6>CPU 4 (0x0800) enabledProcessor #8 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0006] id[0xa] enabled[1]) <6>CPU 5 (0x0a00) enabledProcessor #10 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0007] id[0xc] enabled[1]) <6>CPU 6 (0x0c00) enabledProcessor #12 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0008] id[0xe] enabled[1]) <6>CPU 7 (0x0e00) enabledProcessor #14 Pentium 4(tm) XEON(tm) APIC version 16 <4> <6>LAPIC (acpi_id[0x0009] id[0x1] enabled[0]) <6>CPU 8 (0x0100) disabled <6>LAPIC (acpi_id[0x000a] id[0x3] enabled[0]) <6>CPU 9 (0x0300) disabled <6>LAPIC (acpi_id[0x000b] id[0x5] enabled[0]) <6>CPU 10 (0x0500) disabled <6>LAPIC (acpi_id[0x000c] id[0x7] enabled[0]) <6>CPU 11 (0x0700) disabled <6>LAPIC (acpi_id[0x000d] id[0x9] enabled[0]) <6>CPU 12 (0x0900) disabled <6>LAPIC (acpi_id[0x000e] id[0xb] enabled[0]) <6>CPU 13 (0x0b00) disabled <6>LAPIC (acpi_id[0x000f] id[0xd] enabled[0]) <6>CPU 14 (0x0d00) disabled <6>LAPIC (acpi_id[0x0010] id[0xf] enabled[0]) <6>CPU 15 (0x0f00) disabled <6>IOAPIC (id[0x8] address[0xfec00000] global_irq_base[0x0]) <6>IOAPIC (id[0x9] address[0xfec01000] global_irq_base[0x10]) <6>IOAPIC (id[0xa] address[0xfec02000] global_irq_base[0x20]) <6>INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1]) <6>LAPIC_NMI (acpi_id[0x00ff] polarity[0x0] trigger[0x0] lint[0x1]) <6>16 CPUs total <6>Local APIC address fee00000 <4>__va_range(0xefff01e0, 0x24): idx=8 mapped at ffff6000 <4>__va_range(0xefff01e0, 0x58): idx=8 mapped at ffff6000 <6>ACPI table found: SRAT v1 [HP P44 0.3] <4>__va_range(0xefff0238, 0x24): idx=8 mapped at ffff6000 <4>__va_range(0xefff0238, 0x50): idx=8 mapped at ffff6000 <6>ACPI table found: SPCR v1 [HP P44 0.1] <4>__va_range(0xefff8000, 0x24): idx=8 mapped at ffff6000 <4>__va_range(0xefff8000, 0x4fae): idx=8 mapped at ffff6000 <6>ACPI table found: SSDT v1 [HP P44 0.2] <4>Enabling the CPU's according to the ACPI table <4>Intel MultiProcessor Specification v1.4 <4> Virtual Wire compatibility mode. <4>OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 <4>I/O APIC #8 Version 17 at 0xFEC00000. <4>I/O APIC #9 Version 17 at 0xFEC01000. <4>I/O APIC #10 Version 17 at 0xFEC02000. <4>Enabling APIC mode: Flat. Using 3 I/O APICs <4>Processors: 8 <4>Kernel command line: root=/dev/cciss/c0d0p1 ide=nodma apm=off acpi=off noapic <6>ide_setup: ide=nodma : Prevented DMA <6>Initializing CPU#0 <4>Detected 1999.339 MHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 3984.58 BogoMIPS <6>Memory: 4138352k/4456444k available (1594k kernel code, 55496k reserved, 397k data, 500k init, 3276732k highmem) <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Inode cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 524288 (order: 9, 2097152 bytes) <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>per-CPU timeslice cutoff: 1462.74 usecs. <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Booting processor 1/2 eip 2000 <6>Initializing CPU#1 <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#1. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 2/4 eip 2000 <6>Initializing CPU#2 <4>masked ExtINT on CPU#2 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#2. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 3/6 eip 2000 <6>Initializing CPU#3 <4>masked ExtINT on CPU#3 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#3. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 4/8 eip 2000 <6>Initializing CPU#4 <4>masked ExtINT on CPU#4 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#4. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 5/10 eip 2000 <6>Initializing CPU#5 <4>masked ExtINT on CPU#5 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#5. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 6/12 eip 2000 <6>Initializing CPU#6 <4>masked ExtINT on CPU#6 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#6. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 7/14 eip 2000 <6>Initializing CPU#7 <4>masked ExtINT on CPU#7 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Hyper-Threading is disabled <6>Intel machine check reporting enabled on CPU#7. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <6>Total of 8 processors activated (31968.46 BogoMIPS). <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 1999.3407 MHz. <4>..... host bus clock speed is 99.9668 MHz. <4>cpu: 0, clocks: 999668, slice: 111074 <4>CPU0<T0:999664,T1:888576,D:14,S:111074,C:999668> <4>cpu: 2, clocks: 999668, slice: 111074 <4>cpu: 1, clocks: 999668, slice: 111074 <4>cpu: 3, clocks: 999668, slice: 111074 <4>cpu: 6, clocks: 999668, slice: 111074 <4>cpu: 7, clocks: 999668, slice: 111074 <4>cpu: 5, clocks: 999668, slice: 111074 <4>cpu: 4, clocks: 999668, slice: 111074 <4>CPU1<T0:999664,T1:777504,D:12,S:111074,C:999668> <4>CPU3<T0:999664,T1:555360,D:8,S:111074,C:999668> <4>CPU2<T0:999664,T1:666432,D:10,S:111074,C:999668> <4>CPU4<T0:999664,T1:444288,D:6,S:111074,C:999668> <4>CPU7<T0:999664,T1:111072,D:0,S:111074,C:999668> <4>CPU5<T0:999664,T1:333216,D:4,S:111074,C:999668> <4>CPU6<T0:999664,T1:222144,D:2,S:111074,C:999668> <4>checking TSC synchronization across CPUs: <4>BIOS BUG: CPU#0 improperly initialized, has -3 usecs TSC skew! FIXED. <4>BIOS BUG: CPU#1 improperly initialized, has -2 usecs TSC skew! FIXED. <4>BIOS BUG: CPU#3 improperly initialized, has 7 usecs TSC skew! FIXED. <4>BIOS BUG: CPU#6 improperly initialized, has -2 usecs TSC skew! FIXED. <4>Waiting on wait_init_idle (map = 0xfe) <4>All processors have done init_idle <6>PCI: PCI BIOS revision 2.10 entry at 0xf1135, last bus=22 <6>PCI: Using configuration type 1 <6>PCI: Probing PCI hardware <6>PCI: Ignoring BAR0-3 of IDE controller 00:0f.1 <6>PCI: Discovered primary peer bus 03 [IRQ] <6>PCI: Discovered primary peer bus 07 [IRQ] <6>PCI: Discovered primary peer bus 0b [IRQ] <6>PCI: Discovered primary peer bus 0f [IRQ] <6>PCI: Discovered primary peer bus 13 [IRQ] <4>PCI: Device 00:78 not found by BIOS <4>PCI: Device 00:7b not found by BIOS <4>PCI: Device 00:b8 not found by BIOS <4>PCI: Device 00:c0 not found by BIOS <4>PCI: Device 00:c2 not found by BIOS <4>PCI: Device 00:c4 not found by BIOS <4>PCI: Device 00:c6 not found by BIOS <4>PCI: Device 00:c8 not found by BIOS <4>PCI: Device 00:ca not found by BIOS <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <4>Starting kswapd <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a National Semiconductor PC87306 <6>loop: loaded (max 8 devices) <6>HP CISS Driver (v 2.4.42) <7>cciss: Device 0xb178 has been found at bus 0 dev 14 func 0 <4>cciss: using DAC cycles <6> blocks= 35553120 block_size= 512 <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) <4> <6> blocks= 35553120 block_size= 512 <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) <4> <4>blk: queue c03d1000, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <6>Partition check: <6> cciss/c0d0: p1 p2 p3 p4 < p5 p6 > <6> cciss/c0d1: p1 <6>tg3.c:v1.5 (March 21, 2003) <6>eth0: Tigon3 [partno(284685-003) rev 0105 PHY(5701)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0b:cd:52:3d:68 <6>bonding.c:v2.4.20-20030320 (March 20, 2003) <3>bonding_init(): either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. <6>bond0 registered without MII link monitoring, in load balancing (round-robin) mode. <6>bond0 registered without ARP monitoring <6>Linux agpgart interface v0.99 (c) Jeff Hartmann <6>agpgart: Maximum main memory to use for agp memory: 203M <7>agpgart: no supported devices found. <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>SvrWks CSB5: IDE controller at PCI slot 00:0f.1 <6>SvrWks CSB5: chipset revision 147 <6>SvrWks CSB5: not 100%% native mode: will probe irqs later <6>SvrWks CSB5: simplex device: DMA forced <6> ide0: BM-DMA at 0x2820-0x2827, BIOS settings: hda:pio, hdb:pio <6>SvrWks CSB5: simplex device: DMA forced <6> ide1: BM-DMA at 0x2828-0x282f, BIOS settings: hdc:pio, hdd:pio <4>hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive <4>hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } <4>hda: set_drive_speed_status: error=0x04 <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>hda: attached ide-cdrom driver. <6>hda: ATAPI 24X CD-ROM drive, 128kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 65536 buckets, 512Kbytes <6>TCP: Hash tables configured (established 262144 bind 65536) <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <4>reiserfs: checking transaction log (device 68:01) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>VFS: Mounted root (reiserfs filesystem) readonly. <6>Freeing unused kernel memory: 500k freed <6>Adding Swap: 2097136k swap-space (priority 42) <4>reiserfs: checking transaction log (device 68:11) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>reiserfs: checking transaction log (device 68:06) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>reiserfs: checking transaction log (device 68:02) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>reiserfs: checking transaction log (device 68:03) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 -------------------------------------------------------------------- I've also messages like this one in /var/log/messages: Jun 17 17:49:24 linux kernel: mtrr: type mismatch for f6000000,800000 old: write-back new: write-combining -------------------------------------------------------------------- Let me know if I need to send other logs from the system. Any hint to help me solve the issue would be welcome. Thanks in advance, Bruno. -- Linux Solution Consultant Tél: +33 476 143 278 - Fax: +33 476 146 105 HP/Intel Solution Center http://hpintelco.net Hewlett-Packard Grenoble/France Des infos sur Linux? http://www.HyPer-Linux.org http://www.hp.com/linux La musique ancienne? http://www.musique-ancienne.org http://www.medieval.org ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading 2003-06-17 17:24 ` Bruno Cornec @ 2003-06-26 14:07 ` Bruno Cornec [not found] ` <20030624190315.T9969@morley.grenoble.hp.com> 0 siblings, 1 reply; 5+ messages in thread From: Bruno Cornec @ 2003-06-26 14:07 UTC (permalink / raw) To: linux-kernel; +Cc: sophie.pasquier, venkatesh.pallipadi Hello, Thanks to Venkatesh Pallipadi, I made some progress on that problem. I recompiled 2.4.21-ac2 and activated the CONFIG_X86_CLUSTERED_APIC Now with HT activated in the BIOS, the machine is able to boot but only half of the processors are detected :-( I've attached my .config and the result of dmesg just after booting. I've surely missed something so ask again for your kind support. Thanks in advance for your help. Bruno Cornec (Bruno.Cornec@hp.com) said: (Distro SuSE SLES8 - kernel 2.4.21-ac2) -------------------------------------------------------------------- The latest BIOS has been put on the system (P44 - 2003-02-18) -------------------------------------------------------------------- cat /proc/cmdline : root=/dev/cciss/c0d0p1 ide=nodma (16 CPUs) -------------------------------------------------------------------- boot.msg Inspecting /boot/System.map Loaded 18441 symbols from /boot/System.map. Symbols match kernel version 2.4.21. No module symbols loaded. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.21-ac2 (root@linux) (gcc version 3.2) #1 SMP Tue Jun 24 11:09:11 CEST 2003 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009f400 (usable) <4> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) <4> BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data) <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) <4> BIOS-e820: 0000000100000000 - 000000040ffff000 (usable) <5>15743MB HIGHMEM available. <5>896MB LOWMEM available. <4>found SMP MP-table at 000f4fd0 <4>hm, page 000f4000 reserved twice. <4>hm, page 000f5000 reserved twice. <4>hm, page 000f7000 reserved twice. <4>hm, page 000f8000 reserved twice. <4>On node 0 totalpages: 4259839 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 4030463 pages. <4>Intel MultiProcessor Specification v1.4 <4> Virtual Wire compatibility mode. <4>OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 <4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 <4>Processor #2 Pentium 4(tm) XEON(tm) APIC version 20 <4>Processor #4 Pentium 4(tm) XEON(tm) APIC version 20 <4>Processor #6 Pentium 4(tm) XEON(tm) APIC version 20 <4>Processor #8 Pentium 4(tm) XEON(tm) APIC version 20 <4>Processor #10 Pentium 4(tm) XEON(tm) APIC version 20 <4>Processor #12 Pentium 4(tm) XEON(tm) APIC version 20 <4>Processor #14 Pentium 4(tm) XEON(tm) APIC version 20 <4>I/O APIC #8 Version 17 at 0xFEC00000. <4>I/O APIC #9 Version 17 at 0xFEC01000. <4>I/O APIC #10 Version 17 at 0xFEC02000. <4>Processors: 8 <4>xAPIC support is present <4>Enabling APIC mode: Flat. Using 3 I/O APICs <4>Kernel command line: root=/dev/cciss/c0d0p1 ide=nodma <6>ide_setup: ide=nodma : Prevented DMA <6>Initializing CPU#0 <4>Detected 1999.337 MHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 3984.58 BogoMIPS <6>Memory: 16573608k/17039356k available (1617k kernel code, 203152k reserved, 376k data, 288k init, 15859644k highmem) <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Inode cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <6>Buffer cache hash table entries: 524288 (order: 9, 2097152 bytes) <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Physical Processor ID: 0 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Physical Processor ID: 0 <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>per-CPU timeslice cutoff: 1462.74 usecs. <4>task migration cache decay timeout: 10 msecs. <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Booting processor 1/2 eip 2000 <6>Initializing CPU#1 <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Physical Processor ID: 1 <6>Intel machine check reporting enabled on CPU#1. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 2/4 eip 2000 <6>Initializing CPU#2 <4>masked ExtINT on CPU#2 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Physical Processor ID: 2 <6>Intel machine check reporting enabled on CPU#2. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 3/6 eip 2000 <6>Initializing CPU#3 <4>masked ExtINT on CPU#3 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Physical Processor ID: 3 <6>Intel machine check reporting enabled on CPU#3. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 4/8 eip 2000 <6>Initializing CPU#4 <4>masked ExtINT on CPU#4 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Physical Processor ID: 4 <6>Intel machine check reporting enabled on CPU#4. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 5/10 eip 2000 <6>Initializing CPU#5 <4>masked ExtINT on CPU#5 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Physical Processor ID: 5 <6>Intel machine check reporting enabled on CPU#5. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 6/12 eip 2000 <6>Initializing CPU#6 <4>masked ExtINT on CPU#6 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Physical Processor ID: 6 <6>Intel machine check reporting enabled on CPU#6. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <4>Booting processor 7/14 eip 2000 <6>Initializing CPU#7 <4>masked ExtINT on CPU#7 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 3997.69 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: L3 cache: 2048K <6>CPU: Physical Processor ID: 7 <6>Intel machine check reporting enabled on CPU#7. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 <6>Total of 8 processors activated (31968.46 BogoMIPS). <4>WARNING: No sibling found for CPU 0. <4>WARNING: No sibling found for CPU 1. <4>WARNING: No sibling found for CPU 2. <4>WARNING: No sibling found for CPU 3. <4>WARNING: No sibling found for CPU 4. <4>WARNING: No sibling found for CPU 5. <4>WARNING: No sibling found for CPU 6. <4>WARNING: No sibling found for CPU 7. <4>ENABLING IO-APIC IRQs <4>Setting 8 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 8 ... ok. <4>Setting 9 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 9 ... ok. <4>Setting 10 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 10 ... ok. <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 8-0, 8-3, 8-5, 8-7, 8-11, 10-1, 10-2, 10-4 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 68. <7>number of IO-APIC #8 registers: 16. <7>number of IO-APIC #9 registers: 16. <7>number of IO-APIC #10 registers: 16. <6>testing the IO APIC....................... <4> <7>IO APIC #8...... <7>.... register #00: 08000000 <7>....... : physical APIC id: 08 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 000F0011 <7>....... : max redirection entries: 000F <7>....... : PRQ implemented: 0 <7>....... : IO APIC version: 0011 <7>.... register #02: 08000000 <7>....... : arbitration: 08 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 0FF 0F 0 0 0 0 0 1 1 39 <7> 02 040 00 0 0 0 0 0 1 1 31 <7> 03 000 00 1 0 0 0 0 0 0 00 <7> 04 0FF 0F 0 0 0 0 0 1 1 41 <7> 05 000 00 1 0 0 0 0 0 0 00 <7> 06 0FF 0F 0 0 0 0 0 1 1 49 <7> 07 000 00 1 0 0 0 0 0 0 00 <7> 08 0FF 0F 0 0 0 0 0 1 1 51 <7> 09 0FF 0F 1 1 0 1 0 1 1 59 <7> 0a 0FF 0F 1 1 0 1 0 1 1 61 <7> 0b 000 00 1 0 0 0 0 0 0 00 <7> 0c 0FF 0F 0 0 0 0 0 1 1 69 <7> 0d 0FF 0F 1 1 0 1 0 1 1 71 <7> 0e 0FF 0F 0 0 0 0 0 1 1 79 <7> 0f 0FF 0F 0 0 0 0 0 1 1 81 <4> <7>IO APIC #9...... <7>.... register #00: 09000000 <7>....... : physical APIC id: 09 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 000F0011 <7>....... : max redirection entries: 000F <7>....... : PRQ implemented: 0 <7>....... : IO APIC version: 0011 <7>.... register #02: 09000000 <7>....... : arbitration: 09 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 0FF 0F 1 1 0 1 0 1 1 89 <7> 01 0FF 0F 1 1 0 1 0 1 1 91 <7> 02 0FF 0F 1 1 0 1 0 1 1 99 <7> 03 0FF 0F 1 1 0 1 0 1 1 A1 <7> 04 0FF 0F 1 1 0 1 0 1 1 A9 <7> 05 0FF 0F 1 1 0 1 0 1 1 B1 <7> 06 0FF 0F 1 1 0 1 0 1 1 B9 <7> 07 0FF 0F 1 1 0 1 0 1 1 C1 <7> 08 0FF 0F 1 1 0 1 0 1 1 C9 <7> 09 0FF 0F 1 1 0 1 0 1 1 D1 <7> 0a 0FF 0F 1 1 0 1 0 1 1 D9 <7> 0b 0FF 0F 1 1 0 1 0 1 1 E1 <7> 0c 0FF 0F 1 1 0 1 0 1 1 E9 <7> 0d 0FF 0F 1 1 0 1 0 1 1 32 <7> 0e 0FF 0F 1 1 0 1 0 1 1 3A <7> 0f 0FF 0F 1 1 0 1 0 1 1 42 <4> <7>IO APIC #10...... <7>.... register #00: 0A000000 <7>....... : physical APIC id: 0A <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 000F0011 <7>....... : max redirection entries: 000F <7>....... : PRQ implemented: 0 <7>....... : IO APIC version: 0011 <7>.... register #02: 0A000000 <7>....... : arbitration: 0A <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 0FF 0F 1 1 0 1 0 1 1 4A <7> 01 000 00 1 0 0 0 0 0 0 00 <7> 02 000 00 1 0 0 0 0 0 0 00 <7> 03 0FF 0F 1 1 0 1 0 1 1 52 <7> 04 000 00 1 0 0 0 0 0 0 00 <7> 05 0FF 0F 1 1 0 1 0 1 1 5A <7> 06 0FF 0F 1 1 0 1 0 1 1 62 <7> 07 0FF 0F 1 1 0 1 0 1 1 6A <7> 08 0FF 0F 1 1 0 1 0 1 1 72 <7> 09 0FF 0F 1 1 0 1 0 1 1 7A <7> 0a 0FF 0F 1 1 0 1 0 1 1 82 <7> 0b 0FF 0F 1 1 0 1 0 1 1 8A <7> 0c 0FF 0F 1 1 0 1 0 1 1 92 <7> 0d 0FF 0F 1 1 0 1 0 1 1 9A <7> 0e 0FF 0F 1 1 0 1 0 1 1 A2 <7> 0f 0FF 0F 1 1 0 1 0 1 1 AA <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ4 -> 0:4 <7>IRQ6 -> 0:6 <7>IRQ8 -> 0:8 <7>IRQ9 -> 0:9 <7>IRQ10 -> 0:10 <7>IRQ12 -> 0:12 <7>IRQ13 -> 0:13 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <7>IRQ16 -> 1:0 <7>IRQ17 -> 1:1 <7>IRQ18 -> 1:2 <7>IRQ19 -> 1:3 <7>IRQ20 -> 1:4 <7>IRQ21 -> 1:5 <7>IRQ22 -> 1:6 <7>IRQ23 -> 1:7 <7>IRQ24 -> 1:8 <7>IRQ25 -> 1:9 <7>IRQ26 -> 1:10 <7>IRQ27 -> 1:11 <7>IRQ28 -> 1:12 <7>IRQ29 -> 1:13 <7>IRQ30 -> 1:14 <7>IRQ31 -> 1:15 <7>IRQ32 -> 2:0 <7>IRQ35 -> 2:3 <7>IRQ37 -> 2:5 <7>IRQ38 -> 2:6 <7>IRQ39 -> 2:7 <7>IRQ40 -> 2:8 <7>IRQ41 -> 2:9 <7>IRQ42 -> 2:10 <7>IRQ43 -> 2:11 <7>IRQ44 -> 2:12 <7>IRQ45 -> 2:13 <7>IRQ46 -> 2:14 <7>IRQ47 -> 2:15 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 1999.1451 MHz. <4>..... host bus clock speed is 99.9571 MHz. <4>cpu: 0, clocks: 999571, slice: 111063 <4>CPU0<T0:999568,T1:888496,D:9,S:111063,C:999571> <4>cpu: 1, clocks: 999571, slice: 111063 <4>cpu: 2, clocks: 999571, slice: 111063 <4>cpu: 3, clocks: 999571, slice: 111063 <4>cpu: 6, clocks: 999571, slice: 111063 <4>cpu: 4, clocks: 999571, slice: 111063 <4>cpu: 7, clocks: 999571, slice: 111063 <4>cpu: 5, clocks: 999571, slice: 111063 <4>CPU2<T0:999568,T1:666368,D:11,S:111063,C:999571> <4>CPU1<T0:999568,T1:777440,D:2,S:111063,C:999571> <4>CPU3<T0:999568,T1:555312,D:4,S:111063,C:999571> <4>CPU5<T0:999568,T1:333184,D:6,S:111063,C:999571> <4>CPU4<T0:999568,T1:444240,D:13,S:111063,C:999571> <4>CPU6<T0:999568,T1:222112,D:15,S:111063,C:999571> <4>CPU7<T0:999568,T1:111056,D:8,S:111063,C:999571> <4>migration_task 0 on cpu=0 <4>migration_task 1 on cpu=1 <4>migration_task 2 on cpu=2 <4>migration_task 3 on cpu=3 <4>migration_task 4 on cpu=4 <4>migration_task 5 on cpu=5 <4>migration_task 6 on cpu=6 <4>migration_task 7 on cpu=7 <6>PCI: PCI BIOS revision 2.10 entry at 0xf1135, last bus=22 <6>PCI: Using configuration type 1 <6>PCI: Probing PCI hardware <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Ignoring BAR0-3 of IDE controller 00:0f.1 <6>PCI: Discovered primary peer bus 03 [IRQ] <6>PCI: Discovered primary peer bus 07 [IRQ] <6>PCI: Discovered primary peer bus 0b [IRQ] <6>PCI: Discovered primary peer bus 0f [IRQ] <6>PCI: Discovered primary peer bus 13 [IRQ] <6>PCI->APIC IRQ transform: (B0,I12,P0) -> 37 <6>PCI->APIC IRQ transform: (B0,I13,P0) -> 41 <6>PCI->APIC IRQ transform: (B0,I14,P0) -> 40 <6>PCI->APIC IRQ transform: (B0,I15,P0) -> 10 <6>PCI->APIC IRQ transform: (B0,I16,P0) -> 39 <6>PCI->APIC IRQ transform: (B0,I16,P1) -> 32 <6>PCI->APIC IRQ transform: (B0,I16,P2) -> 38 <6>PCI->APIC IRQ transform: (B0,I30,P0) -> 35 <6>PCI->APIC IRQ transform: (B3,I2,P0) -> 43 <6>PCI->APIC IRQ transform: (B3,I30,P0) -> 35 <6>PCI->APIC IRQ transform: (B7,I30,P0) -> 35 <6>PCI->APIC IRQ transform: (B11,I30,P0) -> 35 <6>PCI->APIC IRQ transform: (B15,I30,P0) -> 35 <6>PCI->APIC IRQ transform: (B19,I30,P0) -> 35 <4>PCI: Device 00:78 not found by BIOS <4>PCI: Device 00:7b not found by BIOS <4>PCI: Device 00:b8 not found by BIOS <4>PCI: Device 00:c0 not found by BIOS <4>PCI: Device 00:c2 not found by BIOS <4>PCI: Device 00:c4 not found by BIOS <4>PCI: Device 00:c6 not found by BIOS <4>PCI: Device 00:c8 not found by BIOS <4>PCI: Device 00:ca not found by BIOS <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <4>Starting kswapd <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a National Semiconductor PC87306 <6>loop: loaded (max 8 devices) <6>HP CISS Driver (v 2.4.44) <7>cciss: Device 0xb178 has been found at bus 0 dev 14 func 0 <6> blocks= 35553120 block_size= 512 <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) <4> <6> blocks= 35553120 block_size= 512 <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) <4> <4>blk: queue c03a8b60, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <6>Partition check: <6> cciss/c0d0: p1 p2 p3 p4 < p5 p6 > <6> cciss/c0d1: p1 [...] -------------------------------------------------------------------- The corresponding .config is: -------------------------------------------------------------------- # # Automatically generated make config: don't edit # CONFIG_X86=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # # CONFIG_EXPERIMENTAL is not set # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_HAS_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_F00F_WORKS_OK=y CONFIG_X86_MCE=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_NOHIGHMEM is not set # CONFIG_HIGHMEM4G is not set CONFIG_HIGHMEM64G=y CONFIG_HIGHMEM=y CONFIG_X86_PAE=y CONFIG_HIGHIO=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_SMP=y CONFIG_X86_CLUSTERED_APIC=y # CONFIG_X86_NUMA is not set # CONFIG_X86_TSC_DISABLE is not set CONFIG_X86_TSC=y CONFIG_HAVE_DEC_LOCK=y # # General setup # CONFIG_NET=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_ISA is not set # CONFIG_SCx200 is not set CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_IKCONFIG is not set # CONFIG_PM is not set # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_RTC_IS_GMT is not set # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set # # ACPI Support # # CONFIG_ACPI is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play configuration # # CONFIG_PNP is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_CPQ_DA is not set CONFIG_BLK_CPQ_CISS_DA=y # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_STATS is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set # CONFIG_NETFILTER is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_VLAN_8021Q is not set # # # # CONFIG_IPX is not set # CONFIG_ATALK is not set # # Appletalk devices # # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # # Telephony Support # # CONFIG_PHONE is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_GENERIC is not set CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_BLK_DEV_ADMA100 is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set CONFIG_BLK_DEV_RZ1000=y # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_SVWKS=y # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # # SCSI support # CONFIG_SCSI=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_DEBUG_QUEUES=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # I2O device support # # CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=y # CONFIG_FDDI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Input core support # # CONFIG_INPUT is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y # CONFIG_SERIAL_CONSOLE is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # CONFIG_HVC_CONSOLE is not set # # I2C support # # CONFIG_I2C is not set # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=y CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # CONFIG_MK712_MOUSE is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # # Input core support is needed for gameports # # # Input core support is needed for joysticks # # CONFIG_QIC02_TAPE is not set # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_AMD_RNG is not set # CONFIG_INTEL_RNG is not set # CONFIG_AMD_PM768 is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y CONFIG_EXT3_FS=m CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=m # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_JFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UFS_FS is not set # CONFIG_XFS_FS is not set # # Network File Systems # # CONFIG_CODA_FS is not set CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_NCP_FS is not set # CONFIG_ZISOFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Console drivers # CONFIG_VGA_CONSOLE=y # CONFIG_VIDEO_SELECT is not set # # Sound # # CONFIG_SOUND is not set # # USB support # # CONFIG_USB is not set # # Bluetooth support # # CONFIG_BLUEZ is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_FRAME_POINTER is not set # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_PANIC_MORSE is not set # CONFIG_DEBUG_SPINLOCK is not set # # Library routines # # CONFIG_CRC32 is not set # CONFIG_ZLIB_INFLATE is not set # CONFIG_ZLIB_DEFLATE is not set -------------------------------------------------------------------- -- Linux Solution Consultant Tél: +33 476 143 278 - Fax: +33 476 146 105 HP/Intel Solution Center http://hpintelco.net Hewlett-Packard Grenoble/France Des infos sur Linux? http://www.HyPer-Linux.org http://www.hp.com/linux La musique ancienne? http://www.musique-ancienne.org http://www.medieval.org ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <20030624190315.T9969@morley.grenoble.hp.com>]
* SUMMARY: DL760 G2 issue with Hyper-Threading: Problem Solved ! [not found] ` <20030624190315.T9969@morley.grenoble.hp.com> @ 2003-07-01 18:23 ` Bruno Cornec 0 siblings, 0 replies; 5+ messages in thread From: Bruno Cornec @ 2003-07-01 18:23 UTC (permalink / raw) To: Pallipadi, Venkatesh; +Cc: sophie.pasquier, linux-kernel [-- Attachment #1: Type: text/plain, Size: 2743 bytes --] Hello, Here is an attempt to summarize all the actions done around that issue to try and help solve the problem. PROBLEM: DL760 G2 issue with Hyper-Threading (HT) When activating HT on the machine in the BIOS, the system boots correctly as it seems (detecting the 16 CPUs it should detect) but then it hangs during the remaining phases of the boot. The base distribution is SLES 8. On my machine, I made the following tests, with the following results: In every case HT is selected in the BIOS, CONFIG_HIGHMEM64G=y, CONFIG_HIGHMEM=y, CONFIG_X86_PAE=y (The machine has 16GB of RAM) The latest BIOS has been put on the system (P44 - 2003-02-18) Kernel config Status ====== ====== ====== k_smp-2.4.19-113 apm=off acpi=off noapic Unstable => Hang (no message) k_smp-2.4.19-257 apm=off acpi=off noapic Unstable => Hang (no message) 2.4.20-18.9bigmem apm=off acpi=off noapic Unstable => Hang (no message) 2.4.21 apm=off acpi=off noapic Unstable => Hang (no message) k_smp-2.4.19-113 apm=off acpi=off Kernel Panic during boot (*) k_smp-2.4.19-257 apm=off acpi=off Kernel Panic during boot (*) 2.4.20-18.9bigmem apm=off acpi=off Kernel Panic during boot (*) 2.4.21 apm=off acpi=off Kernel Panic during boot (*) 2.4.21-ac2 CONFIG_ACPI=n Stable with only 8 CPUs detected CONFIG_X86_CLUSTERED_APIC=y 2.4.21-ac2 +CONFIG_ACPI=y alone print kernel boots (1 line on screen) 2.4.21-ac2 CONFIG_PM=y Kernel Panic during boot (*) 2.4.21-ac3/4+bruno CONFIG_PM=y Kernel Panic during boot (*) Every ACPI MPS table in Bios gives the same 2.4.21-ac4+bruno With attached .config No problem !! So it seems that to have a working system, you need: 2.4.21-ac4 + the patch sent by Venkatesh Pallipadi (attached again) + a right .config (attached as well) containing at least: CONFIG_SMP=y CONFIG_X86_CLUSTERED_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_ACPI=y CONFIG_ACPI_HT_ONLY=y CONFIG_ACPI_BOOT=y And no CONFIG_PM set. The proof: linux:~ # cat /proc/cpuinfo | grep processor |wc -l 16 :-)) The full boot trace is attached (trace.ok) BTW, without your latest patch, the system is hanging as before, and as I was able to connect another machine on the serial port, I now have a trace in case you were interested (attached as trace.nok). Thanks a lot to Venkatesh Pallipadi for the time taken to solve the issue. Bruno. -- Linux Solution Consultant Tél: +33 476 143 278 - Fax: +33 476 146 105 HP/Intel Solution Center http://hpintelco.net Hewlett-Packard Grenoble/France Des infos sur Linux? http://www.HyPer-Linux.org http://www.hp.com/linux La musique ancienne? http://www.musique-ancienne.org http://www.medieval.org [-- Attachment #2: bruno.patch --] [-- Type: text/plain, Size: 1092 bytes --] --- linux-2.4.21-ac2/arch/i386/kernel/mpparse.c.org 2003-06-30 12:52:21.000000000 -0700 +++ linux-2.4.21-ac2/arch/i386/kernel/mpparse.c 2003-06-30 12:54:40.000000000 -0700 @@ -987,7 +987,10 @@ { struct mpc_config_processor processor; int boot_cpu = 0; - + + static unsigned long apic_ver; + static int first_time = 1; + if (id >= MAX_APICS) { printk(KERN_WARNING "Processor #%d invalid (max %d)\n", id, MAX_APICS); @@ -999,7 +1002,18 @@ processor.mpc_type = MP_PROCESSOR; processor.mpc_apicid = id; - processor.mpc_apicver = 0x10; /* TBD: lapic version */ + + if (first_time) { + first_time = 0; + set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE); + Dprintk("Local APIC ID %lx\n", apic_read(APIC_ID)); + apic_ver = apic_read(APIC_LVR); + Dprintk("Local APIC Version %lx\n", apic_ver); + if (APIC_XAPIC_SUPPORT(apic_ver)) + xapic_support = 1; + } + processor.mpc_apicver = apic_ver; + processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0); processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0); processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | [-- Attachment #3: .config --] [-- Type: text/plain, Size: 13437 bytes --] # # Automatically generated make config: don't edit # CONFIG_X86=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # # CONFIG_EXPERIMENTAL is not set # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_HAS_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_F00F_WORKS_OK=y CONFIG_X86_MCE=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_NOHIGHMEM is not set # CONFIG_HIGHMEM4G is not set CONFIG_HIGHMEM64G=y CONFIG_HIGHMEM=y CONFIG_X86_PAE=y CONFIG_HIGHIO=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_SMP=y CONFIG_X86_CLUSTERED_APIC=y # CONFIG_X86_NUMA is not set # CONFIG_X86_TSC_DISABLE is not set CONFIG_X86_TSC=y CONFIG_HAVE_DEC_LOCK=y # # General setup # CONFIG_NET=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_ISA is not set # CONFIG_SCx200 is not set CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_IKCONFIG is not set # CONFIG_PM is not set # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_RTC_IS_GMT is not set # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set # # ACPI Support # CONFIG_ACPI=y CONFIG_ACPI_HT_ONLY=y CONFIG_ACPI_BOOT=y # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play configuration # # CONFIG_PNP is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_CPQ_DA is not set CONFIG_BLK_CPQ_CISS_DA=y # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_STATS is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set # CONFIG_NETFILTER is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_VLAN_8021Q is not set # # # # CONFIG_IPX is not set # CONFIG_ATALK is not set # # Appletalk devices # # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # # Telephony Support # # CONFIG_PHONE is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_IDEDISK is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_GENERIC is not set CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_BLK_DEV_ADMA100 is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set CONFIG_BLK_DEV_RZ1000=y # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_SVWKS=y # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # # SCSI support # CONFIG_SCSI=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_DEBUG_QUEUES=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_ATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # I2O device support # # CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=y # CONFIG_FDDI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Input core support # # CONFIG_INPUT is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # CONFIG_HVC_CONSOLE is not set # # I2C support # # CONFIG_I2C is not set # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=y CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # CONFIG_MK712_MOUSE is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # # Input core support is needed for gameports # # # Input core support is needed for joysticks # # CONFIG_QIC02_TAPE is not set # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_AMD_RNG is not set # CONFIG_INTEL_RNG is not set # CONFIG_AMD_PM768 is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y CONFIG_EXT3_FS=m CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=m # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_JFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UFS_FS is not set # CONFIG_XFS_FS is not set # # Network File Systems # # CONFIG_CODA_FS is not set CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_NCP_FS is not set # CONFIG_ZISOFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Console drivers # CONFIG_VGA_CONSOLE=y # CONFIG_VIDEO_SELECT is not set # # Sound # # CONFIG_SOUND is not set # # USB support # # CONFIG_USB is not set # # Bluetooth support # # CONFIG_BLUEZ is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_FRAME_POINTER is not set # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_PANIC_MORSE is not set # CONFIG_DEBUG_SPINLOCK is not set # # Library routines # # CONFIG_CRC32 is not set # CONFIG_ZLIB_INFLATE is not set # CONFIG_ZLIB_DEFLATE is not set [-- Attachment #4: trace.ok --] [-- Type: text/plain, Size: 14392 bytes --] Linux version 2.4.21-ac4 (root@linux) (gcc version 3.2) #5 SMP Tue Jul 1 19:34:42 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000040ffff000 (usable) 15743MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4fd0 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000f7000 reserved twice. hm, page 000f8000 reserved twice. On node 0 totalpages: 4259839 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 4030463 pages. ACPI: RSDP (v000 HP ) @ 0x000f4f70 ACPI: RSDT (v001 HP P44 00000.00001) @ 0xefff0000 ACPI: FADT (v001 HP P44 00000.00001) @ 0xefff0040 ACPI: MADT (v001 HP P44 00000.00001) @ 0xefff0100 ACPI: SRAT (v001 HP P44 00000.00003) @ 0xefff01e0 ACPI: SPCR (v001 HP P44 00000.00001) @ 0xefff0238 ACPI: DSDT (v001 HP P44 00000.00001) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) Processor #4 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) Processor #6 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] enabled) Processor #8 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled) Processor #10 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled) Processor #12 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0e] enabled) Processor #14 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled) Processor #1 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled) Processor #3 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x05] enabled) Processor #5 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x07] enabled) Processor #7 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x09] enabled) Processor #9 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0b] enabled) Processor #11 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0d] enabled) Processor #13 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] enabled) Processor #15 Pentium 4(tm) XEON(tm) APIC version 20 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 I/O APIC #8 Version 17 at 0xFEC00000. I/O APIC #9 Version 17 at 0xFEC01000. I/O APIC #10 Version 17 at 0xFEC02000. Processors: 16 xAPIC support is present Enabling APIC mode: Physical. Using 3 I/O APICs Kernel command line: root=/dev/cciss/c0d0p1 ide=nodma console=tty0 console=ttyS0 ide_setup: ide=nodma : Prevented DMA Initializing CPU#0 Detected 1999.279 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3984.58 BogoMIPS Memory: 16573584k/17039356k available (1533k kernel code, 203176k reserved, 392k data, 288k init, 15859644k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 524288 (order: 9, 2097152 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#0. CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 per-CPU timeslice cutoff: 1462.74 usecs. task migration cache decay timeout: 10 msecs. enabled ExtINT on CPU#0 Leaving ESR disabled. Booting processor 1/2 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 1 Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 2/4 eip 2000 Initializing CPU#2 masked ExtINT on CPU#2 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 2 Intel machine check reporting enabled on CPU#2. CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 3/6 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 3 Intel machine check reporting enabled on CPU#3. CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 4/8 eip 2000 Initializing CPU#4 masked ExtINT on CPU#4 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 4 Intel machine check reporting enabled on CPU#4. CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 5/10 eip 2000 Initializing CPU#5 masked ExtINT on CPU#5 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 5 Intel machine check reporting enabled on CPU#5. CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 6/12 eip 2000 Initializing CPU#6 masked ExtINT on CPU#6 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 6 Intel machine check reporting enabled on CPU#6. CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 7/14 eip 2000 Initializing CPU#7 masked ExtINT on CPU#7 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 7 Intel machine check reporting enabled on CPU#7. CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 8/1 eip 2000 Initializing CPU#8 masked ExtINT on CPU#8 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#8. CPU8: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 9/3 eip 2000 Initializing CPU#9 masked ExtINT on CPU#9 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 1 Intel machine check reporting enabled on CPU#9. CPU9: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 10/5 eip 2000 Initializing CPU#10 masked ExtINT on CPU#10 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 2 Intel machine check reporting enabled on CPU#10. CPU10: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 11/7 eip 2000 Initializing CPU#11 masked ExtINT on CPU#11 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 3 Intel machine check reporting enabled on CPU#11. CPU11: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 12/9 eip 2000 Initializing CPU#12 masked ExtINT on CPU#12 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 4 Intel machine check reporting enabled on CPU#12. CPU12: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 13/11 eip 2000 Initializing CPU#13 masked ExtINT on CPU#13 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 5 Intel machine check reporting enabled on CPU#13. CPU13: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 14/13 eip 2000 Initializing CPU#14 masked ExtINT on CPU#14 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 6 Intel machine check reporting enabled on CPU#14. CPU14: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 15/15 eip 2000 Initializing CPU#15 masked ExtINT on CPU#15 Leaving ESR disabled. Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 7 Intel machine check reporting enabled on CPU#15. CPU15: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Total of 16 processors activated (63950.02 BogoMIPS). cpu_sibling_map[0] = 8 cpu_sibling_map[1] = 9 cpu_sibling_map[2] = 10 cpu_sibling_map[3] = 11 cpu_sibling_map[4] = 12 cpu_sibling_map[5] = 13 cpu_sibling_map[6] = 14 cpu_sibling_map[7] = 15 cpu_sibling_map[8] = 0 cpu_sibling_map[9] = 1 cpu_sibling_map[10] = 2 cpu_sibling_map[11] = 3 cpu_sibling_map[12] = 4 cpu_sibling_map[13] = 5 cpu_sibling_map[14] = 6 cpu_sibling_map[15] = 7 ENABLING IO-APIC IRQs Setting 8 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 8 ... ok. Setting 9 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 9 ... ok. Setting 10 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 10 ... ok. ..TIMER: vector=0x31 pin1=2 pin2=0 testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1999.2734 MHz. ..... host bus clock speed is 99.9635 MHz. cpu: 0, clocks: 999635, slice: 58802 CPU0<T0:999632,T1:940816,D:14,S:58802,C:999635> cpu: 1, clocks: 999635, slice: 58802 cpu: 8, clocks: 999635, slice: 58802 cpu: 3, clocks: 999635, slice: 58802 cpu: 10, clocks: 999635, slice: 58802 cpu: 11, clocks: 999635, slice: 58802 cpu: 2, clocks: 999635, slice: 58802 cpu: 9, clocks: 999635, slice: 58802 cpu: 15, clocks: 999635, slice: 58802 cpu: 13, clocks: 999635, slice: 58802 cpu: 4, clocks: 999635, slice: 58802 cpu: 5, clocks: 999635, slice: 58802 cpu: 14, clocks: 999635, slice: 58802 cpu: 7, clocks: 999635, slice: 58802 cpu: 12, clocks: 999635, slice: 58802 cpu: 6, clocks: 999635, slice: 58802 CPU3<T0:999632,T1:764416,D:8,S:58802,C:999635> CPU8<T0:999632,T1:470400,D:14,S:58802,C:999635> CPU9<T0:999632,T1:411600,D:12,S:58802,C:999635> CPU10<T0:999632,T1:352752,D:58,S:58802,C:999635> CPU11<T0:999632,T1:294000,D:8,S:58802,C:999635> CPU15<T0:999632,T1:58800,D:0,S:58802,C:999635> CPU2<T0:999632,T1:823216,D:10,S:58802,C:999635> CPU7<T0:999632,T1:529216,D:0,S:58802,C:999635> CPU14<T0:999632,T1:117600,D:2,S:58802,C:999635> CPU4<T0:999632,T1:705616,D:6,S:58802,C:999635> CPU6<T0:999632,T1:588016,D:2,S:58802,C:999635> CPU13<T0:999632,T1:176400,D:4,S:58802,C:999635> CPU5<T0:999632,T1:646816,D:4,S:58802,C:999635> CPU12<T0:999632,T1:235200,D:6,S:58802,C:999635> CPU1<T0:999632,T1:882016,D:12,S:58802,C:999635> migration_task 0 on cpu=0 migration_task 1 on cpu=1 migration_task 2 on cpu=2 migration_task 3 on cpu=3 migration_task 4 on cpu=4 migration_task 5 on cpu=5 migration_task 6 on cpu=6 migration_task 7 on cpu=7 migration_task 8 on cpu=8 migration_task 9 on cpu=9 migration_task 10 on cpu=10 migration_task 11 on cpu=11 migration_task 12 on cpu=12 migration_task 13 on cpu=13 migration_task 14 on cpu=14 migration_task 15 on cpu=15 PCI: PCI BIOS revision 2.10 entry at 0xf1135, last bus=22 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:0f.1 PCI: Discovered primary peer bus 03 [IRQ] PCI: Discovered primary peer bus 07 [IRQ] PCI: Discovered primary peer bus 0b [IRQ] PCI: Discovered primary peer bus 0f [IRQ] PCI: Discovered primary peer bus 13 [IRQ] PCI->APIC IRQ transform: (B0,I12,P0) -> 37 PCI->APIC IRQ transform: (B0,I13,P0) -> 41 PCI->APIC IRQ transform: (B0,I14,P0) -> 40 PCI->APIC IRQ transform: (B0,I15,P0) -> 10 PCI->APIC IRQ transform: (B0,I16,P0) -> 39 PCI->APIC IRQ transform: (B0,I16,P1) -> 32 PCI->APIC IRQ transform: (B0,I16,P2) -> 38 PCI->APIC IRQ transform: (B0,I30,P0) -> 35 PCI->APIC IRQ transform: (B3,I2,P0) -> 43 PCI->APIC IRQ transform: (B3,I30,P0) -> 35 PCI->APIC IRQ transform: (B7,I30,P0) -> 35 PCI->APIC IRQ transform: (B11,I30,P0) -> 35 PCI->APIC IRQ transform: (B15,I30,P0) -> 35 PCI->APIC IRQ transform: (B19,I30,P0) -> 35 PCI: Device 00:78 not found by BIOS PCI: Device 00:7b not found by BIOS PCI: Device 00:b8 not found by BIOS PCI: Device 00:c0 not found by BIOS PCI: Device 00:c2 not found by BIOS PCI: Device 00:c4 not found by BIOS PCI: Device 00:c6 not found by BIOS PCI: Device 00:c8 not found by BIOS PCI: Device 00:ca not found by BIOS [-- Attachment #5: trace.nok --] [-- Type: text/plain, Size: 11856 bytes --] Linux version 2.4.21-ac4 (root@linux) (gcc version 3.2) #7 SMP Tue Jul 1 19:46:47 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000040ffff000 (usable) 15743MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4fd0 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000f7000 reserved twice. hm, page 000f8000 reserved twice. On node 0 totalpages: 4259839 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 4030463 pages. ACPI: RSDP (v000 HP ) @ 0x000f4f70 ACPI: RSDT (v001 HP P44 00000.00001) @ 0xefff0000 ACPI: FADT (v001 HP P44 00000.00001) @ 0xefff0040 ACPI: MADT (v001 HP P44 00000.00001) @ 0xefff0100 ACPI: SRAT (v001 HP P44 00000.00003) @ 0xefff01e0 ACPI: SPCR (v001 HP P44 00000.00001) @ 0xefff0238 ACPI: DSDT (v001 HP P44 00000.00001) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) Processor #4 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) Processor #6 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] enabled) Processor #8 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled) Processor #10 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled) Processor #12 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0e] enabled) Processor #14 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled) Processor #1 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled) Processor #3 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x05] enabled) Processor #5 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x07] enabled) Processor #7 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x09] enabled) Processor #9 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0b] enabled) Processor #11 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0d] enabled) Processor #13 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] enabled) Processor #15 Pentium 4(tm) XEON(tm) APIC version 16 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 I/O APIC #8 Version 17 at 0xFEC00000. I/O APIC #9 Version 17 at 0xFEC01000. I/O APIC #10 Version 17 at 0xFEC02000. Processors: 16 xAPIC support is not present Enabling APIC mode: Flat. Using 3 I/O APICs Kernel command line: root=/dev/cciss/c0d0p1 ide=nodma console=tty0 console=ttyS0 ide_setup: ide=nodma : Prevented DMA Initializing CPU#0 Detected 1999.319 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3984.58 BogoMIPS Memory: 16573584k/17039356k available (1533k kernel code, 203176k reserved, 392k data, 288k init, 15859644k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 524288 (order: 9, 2097152 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#0. CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 per-CPU timeslice cutoff: 1462.74 usecs. task migration cache decay timeout: 10 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 2/2 eip 2000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 1 Intel machine check reporting enabled on CPU#2. CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 3/3 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 1 Intel machine check reporting enabled on CPU#3. CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 4/4 eip 2000 Initializing CPU#4 masked ExtINT on CPU#4 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 2 Intel machine check reporting enabled on CPU#4. CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 5/5 eip 2000 Initializing CPU#5 masked ExtINT on CPU#5 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 2 Intel machine check reporting enabled on CPU#5. CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 6/6 eip 2000 Initializing CPU#6 masked ExtINT on CPU#6 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 3 Intel machine check reporting enabled on CPU#6. CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 7/7 eip 2000 Initializing CPU#7 masked ExtINT on CPU#7 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 3 Intel machine check reporting enabled on CPU#7. CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 8/8 eip 2000 Initializing CPU#8 masked ExtINT on CPU#8 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 4 Intel machine check reporting enabled on CPU#8. CPU8: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 9/9 eip 2000 Initializing CPU#9 masked ExtINT on CPU#9 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3984.58 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 4 Intel machine check reporting enabled on CPU#9. CPU9: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 10/10 eip 2000 Initializing CPU#10 masked ExtINT on CPU#10 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 5 Intel machine check reporting enabled on CPU#10. CPU10: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 11/11 eip 2000 Initializing CPU#11 masked ExtINT on CPU#11 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 5 Intel machine check reporting enabled on CPU#11. CPU11: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 12/12 eip 2000 Initializing CPU#12 masked ExtINT on CPU#12 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 6 Intel machine check reporting enabled on CPU#12. CPU12: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 13/13 eip 2000 Initializing CPU#13 masked ExtINT on CPU#13 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 6 Intel machine check reporting enabled on CPU#13. CPU13: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 14/14 eip 2000 Initializing CPU#14 masked ExtINT on CPU#14 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 7 Intel machine check reporting enabled on CPU#14. CPU14: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 15/15 eip 2000 Initializing CPU#15 masked ExtINT on CPU#15 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Physical Processor ID: 7 Intel machine check reporting enabled on CPU#15. CPU15: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Total of 16 processors activated (63936.92 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 cpu_sibling_map[2] = 3 cpu_sibling_map[3] = 2 cpu_sibling_map[4] = 5 cpu_sibling_map[5] = 4 cpu_sibling_map[6] = 7 cpu_sibling_map[7] = 6 cpu_sibling_map[8] = 9 cpu_sibling_map[9] = 8 cpu_sibling_map[10] = 11 cpu_sibling_map[11] = 10 cpu_sibling_map[12] = 13 cpu_sibling_map[13] = 12 cpu_sibling_map[14] = 15 cpu_sibling_map[15] = 14 ENABLING IO-APIC IRQs BIOS bug, IO-APIC#0 ID 8 is already used!... Kernel panic: Max APIC ID exceeded! In idle task - not syncing ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2003-07-01 18:09 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20030630182610.H2120@morley.grenoble.hp.com>
2003-06-26 16:29 ` PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading Pallipadi, Venkatesh
2003-06-27 7:27 ` Bruno Cornec
[not found] ` <C8C38546F90ABF408A5961FC01FDBF1901048859@fmsmsx405.fm.intel.com>
[not found] ` <20030626161021.E9969@morley.grenoble.hp.com>
2003-06-17 17:24 ` Bruno Cornec
2003-06-26 14:07 ` Bruno Cornec
[not found] ` <20030624190315.T9969@morley.grenoble.hp.com>
2003-07-01 18:23 ` SUMMARY: DL760 G2 issue with Hyper-Threading: Problem Solved ! Bruno Cornec
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®