mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Hemmann, Volker Armin" <volker.hemmann@heim9.tu-clausthal.de>
To: Dave Jones <davej@redhat.com>,
	Bjoern Michaelsen <bmichaelsen@gmx.de>,
	linux-kernel@vger.kernel.org
Subject: Re: AGP problem SiS 746FX Linux 2.6.5-rc3
Date: Tue, 6 Apr 2004 22:37:02 +0200	[thread overview]
Message-ID: <200404062237.02210.volker.hemmann@heim10.tu-clausthal.de> (raw)
In-Reply-To: <20040406203122.GB1100@redhat.com>

Hi,

On Tuesday 06 April 2004 22:31, Dave Jones wrote:
> On Tue, Apr 06, 2004 at 10:06:38PM +0200, Hemmann, Volker Armin wrote:
>  >  static void __devinit sis_get_driver(struct agp_bridge_data *bridge)
>  >  {
>  > -       if (bridge->dev->device == PCI_DEVICE_ID_SI_648 ||
>  > -           bridge->dev->device == PCI_DEVICE_ID_SI_746) {
>  > -               if (agp_bridge->major_version == 3) {
>  > +        if (bridge->dev->device == PCI_DEVICE_ID_SI_648 ||
>  > +           bridge->dev->device == PCI_DEVICE_ID_SI_746) {
>  > +               if (agp_bridge->major_version == 3 &&
>  > agp_bridge->minor_version < 5) {
>  > +                       sis_driver.agp_enable=sis_648_enable;
>  > +               } else {
>
> Ah, a clue. lspci -vvv output please ?
>
> 		Dave


energy root # lspci -vvv
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 746 Host (rev 02)
        Subsystem: Unknown device 1849:0746
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at d0000000 (32-bit, non-prefetchable)
        Capabilities: [c0] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 
64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=1 ArqSz=0 Cal=3 SBA+ AGP+ GART64- 64bit- FW- 
Rate=x8

0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 
[Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 128
        Bus: primary=00, secondary=01, subordinate=02, sec-latency=128
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: cdd00000-cfefffff
        Prefetchable memory behind bridge: bda00000-cdbfffff
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0963 
(rev 25)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 0c00 [size=32]

0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 
(prog-if 80 [Master])
        Subsystem: Unknown device 1849:5513
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 128
        Region 4: I/O ports at ff00 [size=16]

0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 
Controller (rev 0f) (prog-if 10 [OHCI])
        Subsystem: Unknown device 1849:7001
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 128 (20000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at cfffd000 (32-bit, non-prefetchable)

0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 
Controller (rev 0f) (prog-if 10 [OHCI])
        Subsystem: Unknown device 1849:7001
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 128 (20000ns max), cache line size 08
        Interrupt: pin B routed to IRQ 21
        Region 0: Memory at cfffe000 (32-bit, non-prefetchable)

0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 
Controller (prog-if 20 [EHCI])
        Subsystem: Unknown device 1849:7001
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 128 (20000ns max)
        Interrupt: pin D routed to IRQ 23
        Region 0: Memory at cffff000 (32-bit, non-prefetchable)
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 
10/100 Ethernet (rev 90)
        Subsystem: Unknown device 1849:8201
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 128 (13000ns min, 2750ns max)
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at dc00 [size=fffe0000]
        Region 1: Memory at cfffc000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 00020000 [disabled]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:0b.0 Multimedia video controller: Brooktree Corporation Bt848 Video 
Capture (rev 12)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 128 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at cdcff000 (32-bit, prefetchable)

0000:00:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 
10)
        Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 128 (500ns min, 6000ns max)
        Interrupt: pin A routed to IRQ 17
        Region 0: I/O ports at d800
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 
5200] (rev a1) (prog-if 00 [VGA])
        Subsystem: LeadTek Research Inc.: Unknown device 2967
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 248 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at ce000000 (32-bit, non-prefetchable) 
[size=cfee0000]
        Region 1: Memory at c0000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at 00020000 [disabled]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [44] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 
64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- 
Rate=x8

Glück Auf
Volker

-- 
Conclusions 
 In a straight-up fight, the Empire squashes the Federation like a bug. Even 
with its numerical advantage removed, the Empire would still squash the 
Federation like a bug. Accept it. -Michael Wong 

  reply	other threads:[~2004-04-06 20:37 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-04-06  3:19 Bjoern Michaelsen
2004-04-06 13:50 ` Dave Jones
2004-04-06 18:04   ` Hemmann, Volker Armin
2004-04-06 18:11     ` Dave Jones
2004-04-06 18:44       ` Hemmann, Volker Armin
2004-04-06 19:24         ` Dave Jones
2004-04-06 20:06           ` Hemmann, Volker Armin
2004-04-06 20:31             ` Dave Jones
2004-04-06 20:37               ` Hemmann, Volker Armin [this message]
2004-04-06 20:48                 ` Dave Jones
2004-04-06 21:04                   ` Hemmann, Volker Armin
2004-04-06 21:08                     ` Dave Jones
2004-04-06 22:01                       ` Hemmann, Volker Armin
2004-04-06 22:14                         ` Dave Jones
2004-04-06 22:26                           ` Hemmann, Volker Armin
2004-04-06 23:24                             ` Bjoern Michaelsen
     [not found] <1HPrP-5sW-3@gated-at.bofh.it>
     [not found] ` <1I53J-1k7-57@gated-at.bofh.it>
     [not found]   ` <1I5wD-1Gx-15@gated-at.bofh.it>
     [not found]     ` <1I5wH-1Gx-35@gated-at.bofh.it>
     [not found]       ` <1I5Q0-1Vt-7@gated-at.bofh.it>
     [not found]         ` <1obEA-82t-11@gated-at.bofh.it>
2004-04-17 15:44           ` Oliver Schoett
  -- strict thread matches above, loose matches on Subject: below --
2004-04-01 17:00 Hemmann, Volker Armin
2004-04-01 17:10 ` Dave Jones
2004-04-01 18:03   ` Hemmann, Volker Armin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200404062237.02210.volker.hemmann@heim10.tu-clausthal.de \
    --to=volker.hemmann@heim9.tu-clausthal.de \
    --cc=bmichaelsen@gmx.de \
    --cc=davej@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®