mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Hemmann, Volker Armin" <volker.hemmann@heim9.tu-clausthal.de>
To: Dave Jones <davej@redhat.com>,
	Bjoern Michaelsen <bmichaelsen@gmx.de>,
	linux-kernel@vger.kernel.org
Subject: Re: AGP problem SiS 746FX Linux 2.6.5-rc3
Date: Tue, 6 Apr 2004 23:04:11 +0200	[thread overview]
Message-ID: <200404062304.12089.volker.hemmann@heim10.tu-clausthal.de> (raw)
In-Reply-To: <20040406204843.GC1100@redhat.com>

On Tuesday 06 April 2004 22:48, Dave Jones wrote:
> On Tue, Apr 06, 2004 at 10:37:02PM +0200, Hemmann, Volker Armin wrote:
>  >         Capabilities: [c0] AGP version 3.0
>
> Ok, so your system is fully AGP v3 compliant, (both host and gfx card).
> The missing check highlighted in your diff means that we only do
> AGPv3 stuff if we have an AGP 3.5 host bridge. You have a 3.0 bridge,
> so it was falling back to AGP v2.  My suspicion now is that the 648 and
> 746 chipsets vary too much for them to both use the generic routines,
> so I'll reinstate the check.  It'll still report that it finds an
> AGP v3.0 device, but until someone comes forward with chipset docs,
> it looks like it'll be limited to AGP v2. (I'm amazed that it works
> at all, really).
>
> It survives a testgart run too ?
>
> 		Dave

I am amazed, too, that may box is running... ;o)

testgart works,  I did a fresh reboot, to be sure:

version: 0.100
bridge id: 0x7461039
agp_mode: 0x1f004e1b
aper_base: 0xd0000000
aper_size: 128
pg_total: 112384
pg_system: 112384
pg_used: 0
entry.key : 0
entry.key : 1
Allocated 8 megs of GART memory
MemoryBenchmark: 1444 mb/s
MemoryBenchmark: 1474 mb/s
MemoryBenchmark: 1477 mb/s
Average speed: 1465 mb/s
Testing data integrity (1st pass): passed on first pass.
Testing data integrity (2nd pass): passed on second pass.

and dmesg:

Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 746 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xd0000000
<snip>
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: sis 648 agp fix - giving bridge time to recover
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode

Glück Auf
Volker

-- 
Conclusions 
 In a straight-up fight, the Empire squashes the Federation like a bug. Even 
with its numerical advantage removed, the Empire would still squash the 
Federation like a bug. Accept it. -Michael Wong 

  reply	other threads:[~2004-04-06 21:07 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-04-06  3:19 Bjoern Michaelsen
2004-04-06 13:50 ` Dave Jones
2004-04-06 18:04   ` Hemmann, Volker Armin
2004-04-06 18:11     ` Dave Jones
2004-04-06 18:44       ` Hemmann, Volker Armin
2004-04-06 19:24         ` Dave Jones
2004-04-06 20:06           ` Hemmann, Volker Armin
2004-04-06 20:31             ` Dave Jones
2004-04-06 20:37               ` Hemmann, Volker Armin
2004-04-06 20:48                 ` Dave Jones
2004-04-06 21:04                   ` Hemmann, Volker Armin [this message]
2004-04-06 21:08                     ` Dave Jones
2004-04-06 22:01                       ` Hemmann, Volker Armin
2004-04-06 22:14                         ` Dave Jones
2004-04-06 22:26                           ` Hemmann, Volker Armin
2004-04-06 23:24                             ` Bjoern Michaelsen
     [not found] <1HPrP-5sW-3@gated-at.bofh.it>
     [not found] ` <1I53J-1k7-57@gated-at.bofh.it>
     [not found]   ` <1I5wD-1Gx-15@gated-at.bofh.it>
     [not found]     ` <1I5wH-1Gx-35@gated-at.bofh.it>
     [not found]       ` <1I5Q0-1Vt-7@gated-at.bofh.it>
     [not found]         ` <1obEA-82t-11@gated-at.bofh.it>
2004-04-17 15:44           ` Oliver Schoett
  -- strict thread matches above, loose matches on Subject: below --
2004-04-01 17:00 Hemmann, Volker Armin
2004-04-01 17:10 ` Dave Jones
2004-04-01 18:03   ` Hemmann, Volker Armin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200404062304.12089.volker.hemmann@heim10.tu-clausthal.de \
    --to=volker.hemmann@heim9.tu-clausthal.de \
    --cc=bmichaelsen@gmx.de \
    --cc=davej@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®