mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [patch 1/2] Incorrect PCI interrupt assignment on ES7000 for platform GSI
@ 2004-09-14  1:50 Natalie.Protasevich
  2004-09-14  2:35 ` Tonnerre
  0 siblings, 1 reply; 3+ messages in thread
From: Natalie.Protasevich @ 2004-09-14  1:50 UTC (permalink / raw)
  To: linux-kernel; +Cc: akpm, Natalie.Protasevich

Resending the patches for PCI interrupt assignment problem after proper formatting (sorry, Andrew!)

In arch/i386/kernel/acpi/boot.c, platform GSI does not propagate back from mp_register_gsi() to a calling routine which results in IRQ to be set for wrong GSI. This causes most of the PCI slots on the first PCI module to fail.  This patch fixes the problem by returning new GSI back to acpi_register_gsi().

Signed-off-by: Natalie Protasevich <Natalie.Protasevich@xxxxxxxxxx>

---

 linux-root/arch/i386/kernel/acpi/boot.c |    5 +++--
 linux-root/arch/i386/kernel/mpparse.c   |   11 ++++++-----
 linux-root/include/asm-i386/mpspec.h    |    2 +-
 3 files changed, 10 insertions(+), 8 deletions(-)

diff -puN arch/i386/kernel/acpi/boot.c~mypatch arch/i386/kernel/acpi/boot.c
--- linux/arch/i386/kernel/acpi/boot.c~mypatch	2004-09-13 14:08:21.192015024 -0600
+++ linux-root/arch/i386/kernel/acpi/boot.c	2004-09-13 14:10:51.457171248 -0600
@@ -442,6 +442,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned in
 unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
 {
 	unsigned int irq;
+	unsigned int plat_gsi;
 
 #ifdef CONFIG_PCI
 	/*
@@ -463,10 +464,10 @@ unsigned int acpi_register_gsi(u32 gsi, 
 
 #ifdef CONFIG_X86_IO_APIC
 	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
-		mp_register_gsi(gsi, edge_level, active_high_low);
+		plat_gsi = mp_register_gsi(gsi, edge_level, active_high_low);
 	}
 #endif
-	acpi_gsi_to_irq(gsi, &irq);
+	acpi_gsi_to_irq(plat_gsi, &irq);
 	return irq;
 }
 EXPORT_SYMBOL(acpi_register_gsi);
diff -puN include/asm-i386/mpspec.h~mypatch include/asm-i386/mpspec.h
--- linux/include/asm-i386/mpspec.h~mypatch	2004-09-13 14:08:21.249006360 -0600
+++ linux-root/include/asm-i386/mpspec.h	2004-09-13 14:09:52.381152168 -0600
@@ -33,7 +33,7 @@ extern void mp_register_lapic_address (u
 extern void mp_register_ioapic (u8 id, u32 address, u32 gsi_base);
 extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 gsi);
 extern void mp_config_acpi_legacy_irqs (void);
-extern void mp_register_gsi (u32 gsi, int edge_level, int active_high_low);
+extern int mp_register_gsi (u32 gsi, int edge_level, int active_high_low);
 #endif /*CONFIG_ACPI_BOOT*/
 
 #define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_APICS)
diff -puN arch/i386/kernel/mpparse.c~mypatch arch/i386/kernel/mpparse.c
--- linux/arch/i386/kernel/mpparse.c~mypatch	2004-09-13 14:08:21.311996784 -0600
+++ linux-root/arch/i386/kernel/mpparse.c	2004-09-13 14:12:00.562665616 -0600
@@ -1051,7 +1051,7 @@ void __init mp_config_acpi_legacy_irqs (
 
 int (*platform_rename_gsi)(int ioapic, int gsi);
 
-void mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
+int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
 {
 	int			ioapic = -1;
 	int			ioapic_pin = 0;
@@ -1060,13 +1060,13 @@ void mp_register_gsi (u32 gsi, int edge_
 #ifdef CONFIG_ACPI_BUS
 	/* Don't set up the ACPI SCI because it's already set up */
 	if (acpi_fadt.sci_int == gsi)
-		return;
+		return gsi;
 #endif
 
 	ioapic = mp_find_ioapic(gsi);
 	if (ioapic < 0) {
 		printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
-		return;
+		return gsi;
 	}
 
 	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
@@ -1085,12 +1085,12 @@ void mp_register_gsi (u32 gsi, int edge_
 		printk(KERN_ERR "Invalid reference to IOAPIC pin "
 			"%d-%d\n", mp_ioapic_routing[ioapic].apic_id, 
 			ioapic_pin);
-		return;
+		return gsi;
 	}
 	if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
 		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
 			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-		return;
+		return gsi;
 	}
 
 	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
@@ -1098,6 +1098,7 @@ void mp_register_gsi (u32 gsi, int edge_
 	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
 		    edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1,
 		    active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1);
+	return gsi;
 }
 
 #endif /*CONFIG_X86_IO_APIC && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)*/
_

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [patch 1/2] Incorrect PCI interrupt assignment on ES7000 for platform GSI
  2004-09-14  1:50 [patch 1/2] Incorrect PCI interrupt assignment on ES7000 for platform GSI Natalie.Protasevich
@ 2004-09-14  2:35 ` Tonnerre
  0 siblings, 0 replies; 3+ messages in thread
From: Tonnerre @ 2004-09-14  2:35 UTC (permalink / raw)
  To: Natalie.Protasevich; +Cc: linux-kernel, akpm

[-- Attachment #1: Type: text/plain, Size: 1146 bytes --]

Salut,

On Mon, Sep 13, 2004 at 07:50:59PM -0600, Natalie.Protasevich@unisys.com wrote:
> diff -puN arch/i386/kernel/acpi/boot.c~mypatch arch/i386/kernel/acpi/boot.c
> --- linux/arch/i386/kernel/acpi/boot.c~mypatch	2004-09-13 14:08:21.192015024 -0600
> +++ linux-root/arch/i386/kernel/acpi/boot.c	2004-09-13 14:10:51.457171248 -0600
> @@ -442,6 +442,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned in
>  unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
>  {
>  	unsigned int irq;
> +	unsigned int plat_gsi;
>  
>  #ifdef CONFIG_PCI
>  	/*
> @@ -463,10 +464,10 @@ unsigned int acpi_register_gsi(u32 gsi, 
>  
>  #ifdef CONFIG_X86_IO_APIC
>  	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
> -		mp_register_gsi(gsi, edge_level, active_high_low);
> +		plat_gsi = mp_register_gsi(gsi, edge_level, active_high_low);
>  	}
>  #endif
> -	acpi_gsi_to_irq(gsi, &irq);
> +	acpi_gsi_to_irq(plat_gsi, &irq);
>  	return irq;
>  }
>  EXPORT_SYMBOL(acpi_register_gsi);

Looking at that,  won't that cause problems if  we don't have IOAPIC?
Then you end up using an undefined value as GSI.

			    Tonnerre

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

* RE: [patch 1/2] Incorrect PCI interrupt assignment on ES7000 for platform GSI
@ 2004-09-14  3:36 Protasevich, Natalie
  0 siblings, 0 replies; 3+ messages in thread
From: Protasevich, Natalie @ 2004-09-14  3:36 UTC (permalink / raw)
  To: Tonnerre; +Cc: linux-kernel, akpm

>> diff -puN arch/i386/kernel/acpi/boot.c~mypatch
arch/i386/kernel/acpi/boot.c
>> --- linux/arch/i386/kernel/acpi/boot.c~mypatch	2004-09-13
14:08:21.192015024 -0600
>> +++ linux-root/arch/i386/kernel/acpi/boot.c	2004-09-13
14:10:51.457171248 -0600
>> @@ -442,6 +442,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned in
unsigned 
>> int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
{
>>  	unsigned int irq;
>> +	unsigned int plat_gsi;
>>  
>>  #ifdef CONFIG_PCI
>>  	/*
>> @@ -463,10 +464,10 @@ unsigned int acpi_register_gsi(u32 gsi,
>>  
>>  #ifdef CONFIG_X86_IO_APIC
>>  	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
>> -		mp_register_gsi(gsi, edge_level, active_high_low);
>> +		plat_gsi = mp_register_gsi(gsi, edge_level,
active_high_low);
>>  	}
>>  #endif
>> -	acpi_gsi_to_irq(gsi, &irq);
>> +	acpi_gsi_to_irq(plat_gsi, &irq);
>>  	return irq;
>>  }
>>  EXPORT_SYMBOL(acpi_register_gsi);
>
> Looking at that,  won't that cause problems if  we don't have IOAPIC?
> Then you end up using an undefined value as GSI.

Oops, you are right! thanks for catching this. 
I guess it would be OK to do:

int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)  {
 	unsigned int irq;
+	unsigned int plat_gsi = gsi;


--Natalie

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2004-09-14  3:36 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-09-14  1:50 [patch 1/2] Incorrect PCI interrupt assignment on ES7000 for platform GSI Natalie.Protasevich
2004-09-14  2:35 ` Tonnerre
2004-09-14  3:36 Protasevich, Natalie

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®