From: Linas Vepstas <linas@austin.ibm.com>
To: linux-kernel@vger.kernel.org,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
long <tlnguyen@snoqualmie.dp.intel.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>,
Greg KH <greg@kroah.com>,
ak@muc.de, Paul Mackerras <paulus@samba.org>,
linuxppc64-dev <linuxppc64-dev@ozlabs.org>,
linux-pci@atrey.karlin.mff.cuni.cz, johnrose@us.ibm.com
Subject: [PATCH 1/13]: PCI Err: pci.h header file changes
Date: Tue, 28 Jun 2005 18:58:17 -0500 [thread overview]
Message-ID: <20050628235817.GA6324@austin.ibm.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 259 bytes --]
pci-err-1-pci.h.patch
This patch adds PCI error recovery callbacks, error state and
error return codes to include/linux/pci.h. These are closely
described in the next patch, a documentation file.
Signed-off-by: Linas Vepstas <linas@linas.org>
[-- Attachment #2: pci-err-1-pci.h.patch --]
[-- Type: text/plain, Size: 2196 bytes --]
--- linux-2.6.12-git10/include/linux/pci.h.linas-orig 2005-06-17 14:48:29.000000000 -0500
+++ linux-2.6.12-git10/include/linux/pci.h 2005-06-24 14:44:59.000000000 -0500
@@ -660,6 +660,37 @@ struct pci_dynids {
unsigned int use_driver_data:1; /* pci_driver->driver_data is used */
};
+/* ---------------------------------------------------------------- */
+/** PCI error recovery infrastructure. If a PCI device driver provides
+ * a set fof callbacks in struct pci_error_handlers, then that device driver
+ * will be notified of PCI bus errors, and can be driven to recovery.
+ */
+
+enum pci_channel_state {
+ pci_channel_io_normal = 0, /* I/O channel is in normal state */
+ pci_channel_io_frozen = 1, /* I/O to channel is blocked */
+ pci_channel_io_perm_failure, /* pci card is dead */
+};
+
+enum pcierr_result {
+ PCIERR_RESULT_NONE=0, /* no result/none/not supported in device driver */
+ PCIERR_RESULT_CAN_RECOVER=1, /* Device driver can recover without slot reset */
+ PCIERR_RESULT_NEED_RESET, /* Device driver wants slot to be reset. */
+ PCIERR_RESULT_DISCONNECT, /* Device has completely failed, is unrecoverable */
+ PCIERR_RESULT_RECOVERED, /* Device driver is fully recovered and operational */
+};
+
+/* PCI bus error event callbacks */
+struct pci_error_handlers
+{
+ enum pci_channel_state error_state; /* current error state */
+ int (*error_detected)(struct pci_dev *dev, enum pci_channel_state error);
+ int (*mmio_enabled)(struct pci_dev *dev); /* MMIO has been reanbled, but not DMA */
+ int (*link_reset)(struct pci_dev *dev); /* PCI Express link has been reset */
+ int (*slot_reset)(struct pci_dev *dev); /* PCI slot has been reset */
+ void (*resume)(struct pci_dev *dev); /* Device driver may resume normal operations */
+};
+
struct module;
struct pci_driver {
struct list_head node;
@@ -673,6 +704,7 @@ struct pci_driver {
int (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable); /* Enable wake event */
void (*shutdown) (struct pci_dev *dev);
+ struct pci_error_handlers err_handler;
struct device_driver driver;
struct pci_dynids dynids;
};
next reply other threads:[~2005-06-29 0:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-28 23:58 Linas Vepstas [this message]
2005-06-29 0:29 ` Greg KH
2005-06-29 3:04 ` Andi Kleen
2005-06-29 1:43 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050628235817.GA6324@austin.ibm.com \
--to=linas@austin.ibm.com \
--cc=ak@muc.de \
--cc=benh@kernel.crashing.org \
--cc=greg@kroah.com \
--cc=johnrose@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
--cc=linuxppc64-dev@ozlabs.org \
--cc=paulus@samba.org \
--cc=seto.hidetoshi@jp.fujitsu.com \
--cc=tlnguyen@snoqualmie.dp.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®