[RFC PATCH 01/35] Add XEN config options and disable unsupported config options.

[Chris Wright <chrisw@sous-sol.org>]

[-- Attachment #1: 00-config-xen --]
[-- Type: text/plain, Size: 4210 bytes --]

The XEN config option is selected from the i386 subarch menu by
choosing the X86_XEN "Xen-compatible" subarch.

The XEN_SHADOW_MODE option defines the memory virtualization mode for
the kernel -- with it enabled, the kernel expects the hypervisor to
perform translation between pseudo-physical and machine addresses on
its behalf.

The disabled config options are:
- DOUBLEFAULT: are trapped by Xen and not virtualized
- HZ: defaults to 100 in Xen VMs
- Power management: not supported in unprivileged VMs
- SMP: not supported in this set of patches
- X86_{UP,LOCAL,IO}_APIC: not supported in unprivileged VMs

Signed-off-by: Ian Pratt <ian.pratt@xensource.com>
Signed-off-by: Christian Limpach <Christian.Limpach@cl.cam.ac.uk>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
---
 arch/i386/Kconfig      |   18 ++++++++++++++----
 drivers/xen/Kconfig    |   21 +++++++++++++++++++++
 kernel/Kconfig.hz      |    4 ++--
 kernel/Kconfig.preempt |    1 +
 4 files changed, 38 insertions(+), 6 deletions(-)

--- xen-subarch-2.6.orig/arch/i386/Kconfig
+++ xen-subarch-2.6/arch/i386/Kconfig
@@ -58,6 +58,12 @@ config X86_PC
 	help
 	  Choose this option if your computer is a standard PC or compatible.
 
+config X86_XEN
+	bool "Xen-compatible"
+	help
+	  Choose this option if you plan to run this kernel on top of the
+	  Xen Hypervisor.
+
 config X86_ELAN
 	bool "AMD Elan"
 	help
@@ -175,6 +181,7 @@ config HPET_EMULATE_RTC
 
 config SMP
 	bool "Symmetric multi-processing support"
+	depends on !X86_XEN
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -230,7 +237,7 @@ source "kernel/Kconfig.preempt"
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors"
-	depends on !SMP && !(X86_VISWS || X86_VOYAGER)
+	depends on !SMP && !(X86_VISWS || X86_VOYAGER || X86_XEN)
 	help
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
@@ -255,12 +262,12 @@ config X86_UP_IOAPIC
 
 config X86_LOCAL_APIC
 	bool
-	depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER)
+	depends on X86_UP_APIC || ((X86_VISWS || SMP) && !(X86_VOYAGER || X86_XEN))
 	default y
 
 config X86_IO_APIC
 	bool
-	depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER))
+	depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER || X86_XEN))
 	default y
 
 config X86_VISWS_APIC
@@ -743,6 +750,7 @@ config HOTPLUG_CPU
 config DOUBLEFAULT
 	default y
 	bool "Enable doublefault exception handler" if EMBEDDED
+	depends on !X86_XEN
 	help
           This option allows trapping of rare doublefault exceptions that
           would otherwise cause a system to silently reboot. Disabling this
@@ -753,7 +761,7 @@ endmenu
 
 
 menu "Power management options (ACPI, APM)"
-	depends on !X86_VOYAGER
+	depends on !(X86_VOYAGER || X86_XEN)
 
 source kernel/power/Kconfig
 
@@ -1075,6 +1083,8 @@ source "security/Kconfig"
 
 source "crypto/Kconfig"
 
+source "drivers/xen/Kconfig"
+
 source "lib/Kconfig"
 
 #
--- xen-subarch-2.6.orig/kernel/Kconfig.hz
+++ xen-subarch-2.6/kernel/Kconfig.hz
@@ -3,7 +3,7 @@
 #
 
 choice
-	prompt "Timer frequency"
+	prompt "Timer frequency" if !XEN
 	default HZ_250
 	help
 	 Allows the configuration of the timer frequency. It is customary
@@ -40,7 +40,7 @@ endchoice
 
 config HZ
 	int
-	default 100 if HZ_100
+	default 100 if HZ_100 || XEN
 	default 250 if HZ_250
 	default 1000 if HZ_1000
 
--- xen-subarch-2.6.orig/kernel/Kconfig.preempt
+++ xen-subarch-2.6/kernel/Kconfig.preempt
@@ -35,6 +35,7 @@ config PREEMPT_VOLUNTARY
 
 config PREEMPT
 	bool "Preemptible Kernel (Low-Latency Desktop)"
+	depends on !XEN
 	help
 	  This option reduces the latency of the kernel by making
 	  all kernel code (that is not executing in a critical section)
--- /dev/null
+++ xen-subarch-2.6/drivers/xen/Kconfig
@@ -0,0 +1,21 @@
+#
+# This Kconfig describe xen options
+#
+
+mainmenu "Xen Configuration"
+
+config XEN
+	bool
+	default y if X86_XEN
+	help
+	  This is the Linux Xen port.
+
+if XEN
+
+config XEN_SHADOW_MODE
+	bool
+	default y
+	help
+	  Fakes out a shadow mode kernel
+
+endif

--