RE: 2.6.19-rc5-mm2

RE: 2.6.19-rc5-mm2

[Pallipadi, Venkatesh]

 

>-----Original Message-----
>From: Gautham R Shenoy [mailto:ego@in.ibm.com] 
>Sent: Wednesday, November 15, 2006 2:34 AM
>To: Gautham R Shenoy; Reuben Farrelly; Andrew Morton; 
>davej@redhat.com; linux-kernel@vger.kernel.org; Pallipadi, 
>Venkatesh; CPUFreq Mailing List
>Subject: Re: 2.6.19-rc5-mm2
>
>Hi,
>
>On Tue, Nov 14, 2006 at 09:58:29PM +0100, Mattia Dongili wrote:
>> 
>> maybe this helps? mostly guessing here, but when cpufreq_userspace is
>> the default governor we may hit this path and leave policy->cur
>> unset.
>
>I doubt if that's causing the problem. My reasons are:
>
>- Reuben's config shows his system to be a x64_64. So if I am not
>  mistaken, the correct file look for would be 
>  arch/ia64/kernel/cpufreq/acpi-cpufreq.c.

ia64 and x86_64 are different!
X86_64 shares acpi-cpufreq.c in arch/i386/kernel/cpu/cpufreq. So, that
is the file that can be causing problems here.

>- The fix provided by you deals with the state of a 
>  driver(hardware) specific variable data->cpu_feature while the
>  governors like userspace/performance/powersave/ondemand are 
>  driver(hardware) independent.
>
>Nevertheless, it could be a valid fix for i386 acpi_cpufreq considering
>that policy->cur is not being initialized if 
>data->cpu_feature == ACPI_ADR_SPACE_FIXED_HARDWARE.

Yes. Patch from Mattia is indeed required for acpi-cpufreq. 
Mattia: Can you please send the patch towards Andrew (With signed off
etc) for inclusion.

Reuben: Can you please enable CPU_FREQ_DEBUG in your config and boot
with "cpufreq.debug=7" boot parameter and send me the log. That will
give some more debug information that should help to root cause this
faster.

Thanks,
Venki

Re: 2.6.19-rc5-mm2

[Mattia Dongili]

On Wed, Nov 15, 2006 at 06:09:47AM -0800, Pallipadi, Venkatesh wrote:
[...]
> >data->cpu_feature == ACPI_ADR_SPACE_FIXED_HARDWARE.
> 
> Yes. Patch from Mattia is indeed required for acpi-cpufreq. 
> Mattia: Can you please send the patch towards Andrew (With signed off
> etc) for inclusion.

Venki, I'm a little worried about the switch/case in question (line
702): the data->cpu_feature is set either to SYSTEM_IO_CAPABLE or
SYSTEM_INTEL_MSR_CAPABLE just a few lines above so it seems the switch
variable is wrong and none of the 2 cases will ever get a chance to
execute.

Unfortunately I don't have enough knowledge to tell if it's simply
necessary to fix the switch variable as 

-       switch (data->cpu_feature) {
+       switch (perf->control_register.space_id) {
        case ACPI_ADR_SPACE_SYSTEM_IO:

or if change it more dramatically like:

diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 18f4715..428ac5b 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -699,18 +699,8 @@ static int acpi_cpufreq_cpu_init(struct
 	if (result)
 		goto err_freqfree;
 
-	switch (data->cpu_feature) {
-	case ACPI_ADR_SPACE_SYSTEM_IO:
-		/* Current speed is unknown and not detectable by IO port */
-		policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
-		break;
-	case ACPI_ADR_SPACE_FIXED_HARDWARE:
-		acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
-		get_cur_freq_on_cpu(cpu);
-		break;
-	default:
-		break;
-	}
+	acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
+	policy->cur = get_cur_freq_on_cpu(cpu);
 
 	/* notify BIOS that we exist */
 	acpi_processor_notify_smm(THIS_MODULE);


Thoughts?
-- 
mattia
:wq!

Re: 2.6.19-rc5-mm2

[Stefan Richter]

Mattia Dongili wrote:
>>> http://oioio.altervista.org/linux/2.6.19-rc5-mm2-1-ko
and
http://oioio.altervista.org/linux/config-2.6.19-rc5-mm2-1
| # CONFIG_SYSFS_DEPRECATED is not set

| ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[080046030227e7bb]
| ieee1394: Node removed: ID:BUS[20754571-38:0455]  GUID[00000000f8ee6067]
| BUG: unable to handle kernel NULL pointer dereference at virtual
address 000000a4
|  printing eip:
| c0238c60
| *pde = 00000000
| Oops: 0000 [#1]
| SMP
| last sysfs file: /devices/pci0000:00/0000:00:00.0/class
[...]
| EIP is at class_device_remove_attrs+0xd/0x34
| eax: f7e02b8c   ebx: 00000000   ecx: ffffffff   edx: 00000000
| esi: 00000000   edi: f7e02b8c   ebp: f7629e04   esp: f7629df8
| ds: 007b   es: 007b   ss: 0068
| Process rmmod (pid: 2419, ti=f7628000 task=f702a550 task.ti=f7628000)
| Stack: f7e02b8c f7e02b94 00000000 f7629e20 c0238d47 00000000 f7e02a30
f7e02b8c
|        f7e02a30 00000000 f7629e2c c0238d82 f7e029f4 f7629e54 f8d5da3d
f8d63087
|        013cb08b 00000026 000001c7 f8ee6067 00000000 00000000 f8d5da52
f7629e5c
| Call Trace:
|  [<c0238d47>] class_device_del+0xc0/0xf0
|  [<c0238d82>] class_device_unregister+0xb/0x15
|  [<f8d5da3d>] nodemgr_remove_ne+0x64/0x79 [ieee1394]
|  [<f8d5da5d>] __nodemgr_remove_host_dev+0xb/0xf [ieee1394]
|  [<c02366dc>] device_for_each_child+0x1d/0x46
|  [<f8d5dd82>] nodemgr_remove_host+0x36/0x5d [ieee1394]
|  [<f8d5b4f3>] __unregister_host+0x1b/0x9c [ieee1394]
|  [<f8d5b70b>] highlevel_remove_host+0x24/0x47 [ieee1394]
|  [<f8d5b14f>] hpsb_remove_host+0x3b/0x5c [ieee1394]
|  [<f8dcbf9d>] ohci1394_pci_remove+0x47/0x1c7 [ohci1394]
|  [<c01dd619>] pci_device_remove+0x19/0x39

Either the FireWire host's device->klist_children was overwritten before
the call to device_for_each_child (perhaps nodemgr didn't hold a
reference which it should have), or/and all of this is an issue with the
ongoing migration away from class_device.
-- 
Stefan Richter
-=====-=-==- =-== =---=
http://arcgraph.de/sr/

Re: 2.6.19-rc5-mm2

[Mattia Dongili]

On Thu, Nov 16, 2006 at 11:50:48PM +0100, Stefan Richter wrote:
> Mattia Dongili wrote:
> > On Thu, Nov 16, 2006 at 07:29:35PM +0100, Stefan Richter wrote:
> >> Could you also test one or even better both of:
> >>  - 2.6.19-rc5 plus
> >> http://me.in-berlin.de/~s5r6/linux1394/updates/2.6.19-rc5/2.6.19-rc5_ieee1394_v204_experimental.patch.bz2
> >> (these are the same FireWire drivers as in -rc5-mm2)
> > 
> > the oops disappear
> > 
> >> and/ or
> >>  - 2.6.19-rc5-mm2 minus
> >> http://www.it.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc5/2.6.19-rc5-mm2/broken-out/git-ieee1394.patch
> > 
> > the oops is there again.
> > I suppose git-ieee1394 is the one then...
> 
> On the contrary, it's very likely _not_ git-ieee1394.

yup, sorry. That's exactly what I ordered my fingers to type... (damn
fingers).

> > dmesg:
> > http://oioio.altervista.org/linux/2.6.19-rc5-test1-ok
> > http://oioio.altervista.org/linux/2.6.19-rc5-mm2-1-ko
> 
> I will look at it tomorrow.
> 
> > next step (smells like bisection) if for tomorrow :)
> 
> Unless you are eager to get results faster, let me think about where
> this superfluous node_entry could come from. Perhaps a run-time test of
> -mm by myself is in order; I am currently on 2.6.19-rc4 plus that patch
> at me.in-berlin.de. Could spare you a lot of time if I find out more. :-)

No problems, I can wait :) After all I don't have any ieee1394 device
(that's why I was rmmod-ing modules :))
If needed feel free to ask me for a bisection.

-- 
mattia
:wq!

Re: 2.6.19-rc5-mm2

[Stefan Richter]

Mattia Dongili wrote:
> On Thu, Nov 16, 2006 at 07:29:35PM +0100, Stefan Richter wrote:
>> Could you also test one or even better both of:
>>  - 2.6.19-rc5 plus
>> http://me.in-berlin.de/~s5r6/linux1394/updates/2.6.19-rc5/2.6.19-rc5_ieee1394_v204_experimental.patch.bz2
>> (these are the same FireWire drivers as in -rc5-mm2)
> 
> the oops disappear
> 
>> and/ or
>>  - 2.6.19-rc5-mm2 minus
>> http://www.it.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc5/2.6.19-rc5-mm2/broken-out/git-ieee1394.patch
> 
> the oops is there again.
> I suppose git-ieee1394 is the one then...

On the contrary, it's very likely _not_ git-ieee1394.

> dmesg:
> http://oioio.altervista.org/linux/2.6.19-rc5-test1-ok
> http://oioio.altervista.org/linux/2.6.19-rc5-mm2-1-ko

I will look at it tomorrow.

> next step (smells like bisection) if for tomorrow :)

Unless you are eager to get results faster, let me think about where
this superfluous node_entry could come from. Perhaps a run-time test of
-mm by myself is in order; I am currently on 2.6.19-rc4 plus that patch
at me.in-berlin.de. Could spare you a lot of time if I find out more. :-)

Thanks for the help,
-- 
Stefan Richter
-=====-=-==- =-== =----
http://arcgraph.de/sr/

Re: 2.6.19-rc5-mm2

[Mattia Dongili]

On Thu, Nov 16, 2006 at 07:29:35PM +0100, Stefan Richter wrote:
> Mattia Dongili wrote:
> > got the following when removing ohci1394 (also happens in -mm1),
> ...
> > ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[080046030227e7bb]
> > ieee1394: Node removed: ID:BUS[20754571-38:0391]  GUID[00000000f8eb5067]
> 
> Hm, there is garbage in this node data. Moreover, your full logs show
> that there was never another node added besides the host node. IOW the
> second "Node removed" line shouldn't be there. Very strange.
> 
> > BUG: unable to handle kernel NULL pointer dereference at virtual address 000000a4
> ...
> > EIP is at class_device_remove_attrs+0xd/0x34
> ...
> 
> Could you also test one or even better both of:
>  - 2.6.19-rc5 plus
> http://me.in-berlin.de/~s5r6/linux1394/updates/2.6.19-rc5/2.6.19-rc5_ieee1394_v204_experimental.patch.bz2
> (these are the same FireWire drivers as in -rc5-mm2)

the oops disappear

> and/ or
>  - 2.6.19-rc5-mm2 minus
> http://www.it.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc5/2.6.19-rc5-mm2/broken-out/git-ieee1394.patch

the oops is there again.
I suppose git-ieee1394 is the one then...

dmesg:
http://oioio.altervista.org/linux/2.6.19-rc5-test1-ok
http://oioio.altervista.org/linux/2.6.19-rc5-mm2-1-ko

next step (smells like bisection) if for tomorrow :)
-- 
mattia
:wq!

Re: 2.6.19-rc5-mm2

[Stefan Richter]

Mattia Dongili wrote:
> got the following when removing ohci1394 (also happens in -mm1),
...
> ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[080046030227e7bb]
> ieee1394: Node removed: ID:BUS[20754571-38:0391]  GUID[00000000f8eb5067]

Hm, there is garbage in this node data. Moreover, your full logs show
that there was never another node added besides the host node. IOW the
second "Node removed" line shouldn't be there. Very strange.

> BUG: unable to handle kernel NULL pointer dereference at virtual address 000000a4
...
> EIP is at class_device_remove_attrs+0xd/0x34
...

Could you also test one or even better both of:
 - 2.6.19-rc5 plus
http://me.in-berlin.de/~s5r6/linux1394/updates/2.6.19-rc5/2.6.19-rc5_ieee1394_v204_experimental.patch.bz2
(these are the same FireWire drivers as in -rc5-mm2)
and/ or
 - 2.6.19-rc5-mm2 minus
http://www.it.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc5/2.6.19-rc5-mm2/broken-out/git-ieee1394.patch


Thanks so far,
-- 
Stefan Richter
-=====-=-==- =-== =----
http://arcgraph.de/sr/

Re: 2.6.19-rc5-mm2

[Mattia Dongili]

Hello,

got the following when removing ohci1394 (also happens in -mm1), config
and full dmesg are here:
http://oioio.altervista.org/linux/config-2.6.19-rc5-mm2-1
http://oioio.altervista.org/linux/config-2.6.19-rc5-mm1-4
http://oioio.altervista.org/linux/oops_rmmod_ohci-2.6.19-rc5-mm2
http://oioio.altervista.org/linux/oops_rmmod_ohci-2.6.19-rc5-mm1

ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[080046030227e7bb]
ieee1394: Node removed: ID:BUS[20754571-38:0391]  GUID[00000000f8eb5067]
BUG: unable to handle kernel NULL pointer dereference at virtual address 000000a4
 printing eip:
c0238c60
*pde = 00000000
Oops: 0000 [#1]
SMP 
last sysfs file: /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/cmd
Modules linked in: ipv6 cpufreq_ondemand acpi_cpufreq freq_table thermal fan button processor ac battery ipt_MASQUERADE iptable_nat ip_nat xt_tcpudp xt_state ip_conntrack nfnetlink iptable_filter ip_tables x_tables dm_snapshot dm_mirror dm_mod sonypi sony_acpi backlight loop hci_usb bluetooth eth1394 usb_storage pcmcia snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss ipw3945 snd_pcm ieee80211 ieee80211_crypt i2c_i801 intel_agp ohci1394 ide_cd firmware_class yenta_socket rsrc_nonstatic pcmcia_core sky2 tifm_7xx1 tifm_core agpgart rtc uhci_hcd psmouse tpm_infineon tpm tpm_bios ieee1394 snd_timer evdev usbcore pcspkr cdrom snd soundcore snd_page_alloc
CPU:    0
EIP:    0060:[<c0238c60>]    Not tainted VLI
EFLAGS: 00010246   (2.6.19-rc5-mm2-1 #9)
EIP is at class_device_remove_attrs+0xd/0x34
eax: f7f7938c   ebx: 00000000   ecx: c012013a   edx: 00000000
esi: 00000000   edi: f7f7938c   ebp: f71a7df4   esp: f71a7de8
ds: 007b   es: 007b   ss: 0068
Process rmmod (pid: 2398, ti=f71a6000 task=c1974030 task.ti=f71a6000)
Stack: f7f7938c f7f79394 00000000 f71a7e10 c0238d47 00000000 f7f791f4 f7f7938c 
       f7f79230 00000000 f71a7e1c c0238d82 f7f791f4 f71a7e44 f8d49ea9 f8d4f495 
       013cb08b 00000026 00000187 f8eb5067 00000000 00000000 f8d49ebe f71a7e4c 
Call Trace:
 [<c0238d47>] class_device_del+0xc0/0xf0
 [<c0238d82>] class_device_unregister+0xb/0x15
 [<f8d49ea9>] nodemgr_remove_ne+0x64/0x79 [ieee1394]
 [<f8d49ec9>] __nodemgr_remove_host_dev+0xb/0xf [ieee1394]
 [<c02366dc>] device_for_each_child+0x1d/0x46
 [<f8d49f9a>] nodemgr_remove_host+0x33/0x90 [ieee1394]
 [<f8d47500>] __unregister_host+0x1b/0x9b [ieee1394]
 [<f8d47716>] highlevel_remove_host+0x24/0x47 [ieee1394]
 [<f8d4715e>] hpsb_remove_host+0x3b/0x5d [ieee1394]
 [<f8dca212>] ohci1394_pci_remove+0x47/0x1c7 [ohci1394]
 [<c01dd619>] pci_device_remove+0x19/0x39
 [<c02383f7>] __device_release_driver+0x71/0x86
 [<c023885f>] driver_detach+0x83/0xc4
 [<c023802b>] bus_remove_driver+0x5a/0x76
 [<c02388c7>] driver_unregister+0xb/0x18
 [<c01dd787>] pci_unregister_driver+0xf/0x5b
 [<f8dcd2de>] ohci1394_cleanup+0xd/0xf [ohci1394]
 [<c013b193>] sys_delete_module+0x18c/0x1b5
 [<c0102d66>] sysenter_past_esp+0x5f/0x85
DWARF2 unwinder stuck at sysenter_past_esp+0x5f/0x85
Leftover inexact backtrace:
 =======================
Code: c0 08 e8 fb f2 f5 ff 89 c1 5d 89 c8 c3 55 85 c0 89 e5 74 08 83 c0 08 e8 6b d9 f5 ff 5d c3 55 89 e5 57 89 c7 56 53 31 db 8b 70 48 <83> be a4 00 00 00 00 75 09 eb 17 89 f8 e8 d0 ff ff ff 89 da 83 
EIP: [<c0238c60>] class_device_remove_attrs+0xd/0x34 SS:ESP 0068:f71a7de8


-- 
mattia
:wq!

Re: 2.6.19-rc5-mm2

[Mattia Dongili]

On Wed, Nov 15, 2006 at 10:06:23AM -0800, Pallipadi, Venkatesh wrote:
[...]
> >Venki, I'm a little worried about the switch/case in question (line
> >702): the data->cpu_feature is set either to SYSTEM_IO_CAPABLE or
> >SYSTEM_INTEL_MSR_CAPABLE just a few lines above so it seems the switch
> >variable is wrong and none of the 2 cases will ever get a chance to
> >execute.
> >
> 
> The variable is set few lines before. So, it should be OK to switch on
> that 
> variable set and one of the two cases will execute. isn't it? Or am 
> I missing something?

Yes, patch is coming.

> >Unfortunately I don't have enough knowledge to tell if it's simply
> >necessary to fix the switch variable as 
> 
> Get_cur_freq_on_cpu will not work on SYSTEM_IO space as ACPI does not
> have an interface to get the current frequency. It only has a interface
> to say whether the last transitions tried was successful or not.
> So, if indeed a change in switch is required, first option should be
> good...

Hmmmm... I see, the following path fooled me, but re-reading it seems
more obvious what it is doing :)

	get_cur_freq_on_cpu
		extract_freq
			switch (data->cpu_feature) {
			case SYSTEM_INTEL_MSR_CAPABLE:
				return extract_msr(val, data);
			case SYSTEM_IO_CAPABLE:
				return extract_io(val, data);
			...

-- 
mattia
:wq!

RE: 2.6.19-rc5-mm2

[Pallipadi, Venkatesh]

 

>-----Original Message-----
>From: Mattia Dongili [mailto:malattia@linux.it] 
>Sent: Wednesday, November 15, 2006 9:47 AM
>To: Pallipadi, Venkatesh
>Cc: ego@in.ibm.com; Reuben Farrelly; Andrew Morton; 
>davej@redhat.com; linux-kernel@vger.kernel.org; CPUFreq 
>Mailing List; Sadykov, Denis M
>Subject: Re: 2.6.19-rc5-mm2
>
>On Wed, Nov 15, 2006 at 06:09:47AM -0800, Pallipadi, Venkatesh wrote:
>[...]
>> >data->cpu_feature == ACPI_ADR_SPACE_FIXED_HARDWARE.
>> 
>> Yes. Patch from Mattia is indeed required for acpi-cpufreq. 
>> Mattia: Can you please send the patch towards Andrew (With signed off
>> etc) for inclusion.
>
>Venki, I'm a little worried about the switch/case in question (line
>702): the data->cpu_feature is set either to SYSTEM_IO_CAPABLE or
>SYSTEM_INTEL_MSR_CAPABLE just a few lines above so it seems the switch
>variable is wrong and none of the 2 cases will ever get a chance to
>execute.
>

The variable is set few lines before. So, it should be OK to switch on
that 
variable set and one of the two cases will execute. isn't it? Or am 
I missing something?

>Unfortunately I don't have enough knowledge to tell if it's simply
>necessary to fix the switch variable as 

Get_cur_freq_on_cpu will not work on SYSTEM_IO space as ACPI does not
have an interface to get the current frequency. It only has a interface
to say whether the last transitions tried was successful or not.
So, if indeed a change in switch is required, first option should be
good...

Thanks,
Venki

Re: 2.6.19-rc5-mm2

[Reuben Farrelly]

Hi,

On 15/11/2006 9:34 PM, Gautham R Shenoy wrote:
> Hi,
> 
> On Tue, Nov 14, 2006 at 09:58:29PM +0100, Mattia Dongili wrote:
>> maybe this helps? mostly guessing here, but when cpufreq_userspace is
>> the default governor we may hit this path and leave policy->cur
>> unset.
> 
> I doubt if that's causing the problem. My reasons are:

Yes.  I just tried with the one-liner from Mattia as below, and unfortunately it 
made no difference.  The crash was the same..

Unfortunately I didn't get to test out 2.6.19-rc5-mm1 as there was some issue 
with it unable to mount my ext3/raid-1 root (fixed in -rc5-mm2), that I didn't 
have time to get to the bottom of.

So there is a chance that this cpufreq problem is not new to -rc5-mm2.

Reuben


> - Reuben's config shows his system to be a x64_64. So if I am not
>   mistaken, the correct file look for would be 
>   arch/ia64/kernel/cpufreq/acpi-cpufreq.c.
> 
> - The fix provided by you deals with the state of a 
>   driver(hardware) specific variable data->cpu_feature while the
>   governors like userspace/performance/powersave/ondemand are 
>   driver(hardware) independent.
> 
> Nevertheless, it could be a valid fix for i386 acpi_cpufreq considering
> that policy->cur is not being initialized if 
> data->cpu_feature == ACPI_ADR_SPACE_FIXED_HARDWARE.
> 
> Please check with Dave Jones or Venkatesh Pallipadi.
> 
> Thanks
> gautham.
> 
>> diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
>> index 18f4715..94e6e86 100644
>> --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
>> +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
>> @@ -706,7 +706,7 @@ static int acpi_cpufreq_cpu_init(struct
>>  		break;
>>  	case ACPI_ADR_SPACE_FIXED_HARDWARE:
>>  		acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
>> -		get_cur_freq_on_cpu(cpu);
>> +		policy->cur = get_cur_freq_on_cpu(cpu);
>>  		break;
>>  	default:
>>  		break;
>>
>> -- 
>> mattia

Re: 2.6.19-rc5-mm2

[Gautham R Shenoy]

Hi,

On Tue, Nov 14, 2006 at 09:58:29PM +0100, Mattia Dongili wrote:
> 
> maybe this helps? mostly guessing here, but when cpufreq_userspace is
> the default governor we may hit this path and leave policy->cur
> unset.

I doubt if that's causing the problem. My reasons are:

- Reuben's config shows his system to be a x64_64. So if I am not
  mistaken, the correct file look for would be 
  arch/ia64/kernel/cpufreq/acpi-cpufreq.c.

- The fix provided by you deals with the state of a 
  driver(hardware) specific variable data->cpu_feature while the
  governors like userspace/performance/powersave/ondemand are 
  driver(hardware) independent.

Nevertheless, it could be a valid fix for i386 acpi_cpufreq considering
that policy->cur is not being initialized if 
data->cpu_feature == ACPI_ADR_SPACE_FIXED_HARDWARE.

Please check with Dave Jones or Venkatesh Pallipadi.

Thanks
gautham.

> 
> diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
> index 18f4715..94e6e86 100644
> --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
> +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
> @@ -706,7 +706,7 @@ static int acpi_cpufreq_cpu_init(struct
>  		break;
>  	case ACPI_ADR_SPACE_FIXED_HARDWARE:
>  		acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
> -		get_cur_freq_on_cpu(cpu);
> +		policy->cur = get_cur_freq_on_cpu(cpu);
>  		break;
>  	default:
>  		break;
> 
> -- 
> mattia
> :wq!
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 

-- 
Gautham R Shenoy
Linux Technology Center
IBM India.
"Freedom comes with a price tag of responsibility, which is still a bargain,
because Freedom is priceless!"

Re: 2.6.19-rc5-mm2

[Mattia Dongili]

On Tue, Nov 14, 2006 at 10:30:53PM +0530, Gautham R Shenoy wrote:
> On Tue, Nov 14, 2006 at 10:31:40PM +1100, Reuben Farrelly wrote:
> 
> Hi Reuben,
> 
> > Oops:
> > 
> > (davej cc'd - I think it's his specialty)
> > 
> 
> [snip]
> 
> > ------------[ cut here ]------------
> > kernel BUG at drivers/cpufreq/cpufreq_userspace.c:138!
> > invalid opcode: 0000 [1] SMP
> > last sysfs file:
> > CPU 0
> > Modules linked in:
> > Pid: 1, comm: swapper Not tainted 2.6.19-rc5-mm2 #1
> > RIP: 0010:[<ffffffff80435299>]  [<ffffffff80435299>] 
> > cpufreq_governor_userspace+0x4e/0x1aa
> > RSP: 0000:ffff81003f61fb40  EFLAGS: 00010246
> > RAX: 0000000000000000 RBX: ffff81003ef4a0d8 RCX: 0000000000000003
> > RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff81003ef4a0d8
> > RBP: ffff81003f61fb60 R08: 0000000000000002 R09: 0000000000000001
> > R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000000
> > R13: 00000000ffffffea R14: 0000000000000000 R15: 0000000000000000
> > FS:  0000000000000000(0000) GS:ffffffff80652000(0000) knlGS:0000000000000000
> > CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> > CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
> > Process swapper (pid: 1, threadinfo ffff81003f61e000, task ffff810037ff0040)
> > Stack:  ffff81003f61fb60 ffff81003ef4a0d8 0000000000000001 ffff81003ef4a0d8
> >  ffff81003f61fb90 ffffffff80433b11 ffffffff805d0e80 ffff81003f61fc20
> >  0000000000000000 ffff81003ef4a0d8 ffff81003f61fbc0 ffffffff80434278
> > Call Trace:
> >  [<ffffffff80433b11>] __cpufreq_governor+0x51/0x9b
> >  [<ffffffff80434278>] __cpufreq_set_policy+0xf8/0x13b
> >  [<ffffffff804343e9>] cpufreq_set_policy+0x3c/0x93
> >  [<ffffffff80435125>] cpufreq_add_dev+0x315/0x427
> >  [<ffffffff803b6f87>] sysdev_driver_register+0x87/0xdb
> >  [<ffffffff80434a8e>] cpufreq_register_driver+0x9e/0x120
> >  [<ffffffff806837b2>] acpi_cpufreq_init+0xbe/0xc9
> >  [<ffffffff802666c0>] init+0x160/0x31c
> >  [<ffffffff8025deb8>] child_rip+0xa/0x12
> > 
> > 
> 
> Hmmm.. The BUG indicates policy->cur i.e current frequency is 0.
> 
> In this scenario, policy->cur variable was last set inside 
> acpi_cpufreq_cpu_init when cpufreq_add_dev made a call to 
> cpufreq_driver->init(policy).
> 
> Are you able to reproduce this with 2.6.19-rc5-mm1? 
> 
> Because AFAICS, there ain't many changes w.r.t x86_64 acpi-cpufreq 
> from 2.6.19-rc5-mm1 to 2.6.19-rc5-mm2. 

maybe this helps? mostly guessing here, but when cpufreq_userspace is
the default governor we may hit this path and leave policy->cur
unset.

diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 18f4715..94e6e86 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -706,7 +706,7 @@ static int acpi_cpufreq_cpu_init(struct
 		break;
 	case ACPI_ADR_SPACE_FIXED_HARDWARE:
 		acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
-		get_cur_freq_on_cpu(cpu);
+		policy->cur = get_cur_freq_on_cpu(cpu);
 		break;
 	default:
 		break;

-- 
mattia
:wq!

Re: 2.6.19-rc5-mm2

[Mariusz Kozlowski]

> hm, but that breaks x86.   Maybe this..
>
>
>  arch/i386/kernel/alternative.c   |    5 -----
>  include/asm-i386/alternative.h   |    4 ++++
>  include/asm-x86_64/alternative.h |    4 ++++
>  3 files changed, 8 insertions(+), 5 deletions(-)
>
> diff -puN
> arch/i386/kernel/alternative.c~fix-x86_64-mm-patch-inline-replacements-for
> arch/i386/kernel/alternative.c ---
> a/arch/i386/kernel/alternative.c~fix-x86_64-mm-patch-inline-replacements-fo
>r +++ a/arch/i386/kernel/alternative.c
> @@ -380,11 +380,6 @@ void apply_paravirt(struct paravirt_patc
>  }
>  extern struct paravirt_patch __start_parainstructions[],
>  	__stop_parainstructions[];
> -#else
> -void apply_paravirt(struct paravirt_patch *start, struct paravirt_patch
> *end) -{
> -}
> -extern struct paravirt_patch *__start_parainstructions,
> *__stop_parainstructions; #endif	/* CONFIG_PARAVIRT */
>
>  void __init alternative_instructions(void)
> diff -puN
> include/asm-i386/alternative.h~fix-x86_64-mm-patch-inline-replacements-for
> include/asm-i386/alternative.h ---
> a/include/asm-i386/alternative.h~fix-x86_64-mm-patch-inline-replacements-fo
>r +++ a/include/asm-i386/alternative.h
> @@ -119,6 +119,10 @@ static inline void alternatives_smp_swit
>  #endif
>
>  struct paravirt_patch;
> +#ifdef CONFIG_PARAVIRT
>  void apply_paravirt(struct paravirt_patch *start, struct paravirt_patch
> *end); +#else
> +#define apply_paravirt(start, end) do { } while (0)
> +#endif
>
>  #endif /* _I386_ALTERNATIVE_H */
> diff -puN
> include/asm-x86_64/alternative.h~fix-x86_64-mm-patch-inline-replacements-fo
>r include/asm-x86_64/alternative.h ---
> a/include/asm-x86_64/alternative.h~fix-x86_64-mm-patch-inline-replacements-
>for +++ a/include/asm-x86_64/alternative.h
> @@ -134,6 +134,10 @@ static inline void alternatives_smp_swit
>  #endif
>
>  struct paravirt_patch;
> +#ifdef CONFIG_PARAVIRT
>  void apply_paravirt(struct paravirt_patch *start, struct paravirt_patch
> *end); +#else
> +#define apply_paravirt(start, end) do { } while (0)
> +#endif
>
>  #endif /* _X86_64_ALTERNATIVE_H */
> _
>
>
> Unpleasant duplication there.  Perhaps we should have linux/alternative.h

Thanks. It compiled fine with this patch.

-- 
Regards,

	Mariusz Kozlowski

Re: 2.6.19-rc5-mm2

[Andrew Morton]

On Tue, 14 Nov 2006 08:41:30 -0800
Andrew Morton <akpm@osdl.org> wrote:

> This should fix it:
> 
> 
> diff -puN arch/i386/kernel/alternative.c~fix-x86_64-mm-patch-inline-replacements-for arch/i386/kernel/alternative.c
> --- a/arch/i386/kernel/alternative.c~fix-x86_64-mm-patch-inline-replacements-for
> +++ a/arch/i386/kernel/alternative.c
> @@ -381,10 +381,7 @@ void apply_paravirt(struct paravirt_patc
>  extern struct paravirt_patch __start_parainstructions[],
>  	__stop_parainstructions[];
>  #else
> -void apply_paravirt(struct paravirt_patch *start, struct paravirt_patch *end)
> -{
> -}
> -extern struct paravirt_patch *__start_parainstructions, *__stop_parainstructions;
> +#define apply_paravirt(start, end) do { } while (0)
>  #endif	/* CONFIG_PARAVIRT */
>  
>  void __init alternative_instructions(void)

hm, but that breaks x86.   Maybe this..


 arch/i386/kernel/alternative.c   |    5 -----
 include/asm-i386/alternative.h   |    4 ++++
 include/asm-x86_64/alternative.h |    4 ++++
 3 files changed, 8 insertions(+), 5 deletions(-)

diff -puN arch/i386/kernel/alternative.c~fix-x86_64-mm-patch-inline-replacements-for arch/i386/kernel/alternative.c
--- a/arch/i386/kernel/alternative.c~fix-x86_64-mm-patch-inline-replacements-for
+++ a/arch/i386/kernel/alternative.c
@@ -380,11 +380,6 @@ void apply_paravirt(struct paravirt_patc
 }
 extern struct paravirt_patch __start_parainstructions[],
 	__stop_parainstructions[];
-#else
-void apply_paravirt(struct paravirt_patch *start, struct paravirt_patch *end)
-{
-}
-extern struct paravirt_patch *__start_parainstructions, *__stop_parainstructions;
 #endif	/* CONFIG_PARAVIRT */
 
 void __init alternative_instructions(void)
diff -puN include/asm-i386/alternative.h~fix-x86_64-mm-patch-inline-replacements-for include/asm-i386/alternative.h
--- a/include/asm-i386/alternative.h~fix-x86_64-mm-patch-inline-replacements-for
+++ a/include/asm-i386/alternative.h
@@ -119,6 +119,10 @@ static inline void alternatives_smp_swit
 #endif
 
 struct paravirt_patch;
+#ifdef CONFIG_PARAVIRT
 void apply_paravirt(struct paravirt_patch *start, struct paravirt_patch *end);
+#else
+#define apply_paravirt(start, end) do { } while (0)
+#endif
 
 #endif /* _I386_ALTERNATIVE_H */
diff -puN include/asm-x86_64/alternative.h~fix-x86_64-mm-patch-inline-replacements-for include/asm-x86_64/alternative.h
--- a/include/asm-x86_64/alternative.h~fix-x86_64-mm-patch-inline-replacements-for
+++ a/include/asm-x86_64/alternative.h
@@ -134,6 +134,10 @@ static inline void alternatives_smp_swit
 #endif
 
 struct paravirt_patch;
+#ifdef CONFIG_PARAVIRT
 void apply_paravirt(struct paravirt_patch *start, struct paravirt_patch *end);
+#else
+#define apply_paravirt(start, end) do { } while (0)
+#endif
 
 #endif /* _X86_64_ALTERNATIVE_H */
_


Unpleasant duplication there.  Perhaps we should have linux/alternative.h

Re: 2.6.19-rc5-mm2

[Gautham R Shenoy]

On Tue, Nov 14, 2006 at 10:31:40PM +1100, Reuben Farrelly wrote:

Hi Reuben,

> Oops:
> 
> (davej cc'd - I think it's his specialty)
> 

[snip]

> ------------[ cut here ]------------
> kernel BUG at drivers/cpufreq/cpufreq_userspace.c:138!
> invalid opcode: 0000 [1] SMP
> last sysfs file:
> CPU 0
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.19-rc5-mm2 #1
> RIP: 0010:[<ffffffff80435299>]  [<ffffffff80435299>] 
> cpufreq_governor_userspace+0x4e/0x1aa
> RSP: 0000:ffff81003f61fb40  EFLAGS: 00010246
> RAX: 0000000000000000 RBX: ffff81003ef4a0d8 RCX: 0000000000000003
> RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff81003ef4a0d8
> RBP: ffff81003f61fb60 R08: 0000000000000002 R09: 0000000000000001
> R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000000
> R13: 00000000ffffffea R14: 0000000000000000 R15: 0000000000000000
> FS:  0000000000000000(0000) GS:ffffffff80652000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
> Process swapper (pid: 1, threadinfo ffff81003f61e000, task ffff810037ff0040)
> Stack:  ffff81003f61fb60 ffff81003ef4a0d8 0000000000000001 ffff81003ef4a0d8
>  ffff81003f61fb90 ffffffff80433b11 ffffffff805d0e80 ffff81003f61fc20
>  0000000000000000 ffff81003ef4a0d8 ffff81003f61fbc0 ffffffff80434278
> Call Trace:
>  [<ffffffff80433b11>] __cpufreq_governor+0x51/0x9b
>  [<ffffffff80434278>] __cpufreq_set_policy+0xf8/0x13b
>  [<ffffffff804343e9>] cpufreq_set_policy+0x3c/0x93
>  [<ffffffff80435125>] cpufreq_add_dev+0x315/0x427
>  [<ffffffff803b6f87>] sysdev_driver_register+0x87/0xdb
>  [<ffffffff80434a8e>] cpufreq_register_driver+0x9e/0x120
>  [<ffffffff806837b2>] acpi_cpufreq_init+0xbe/0xc9
>  [<ffffffff802666c0>] init+0x160/0x31c
>  [<ffffffff8025deb8>] child_rip+0xa/0x12
> 
> 

Hmmm.. The BUG indicates policy->cur i.e current frequency is 0.

In this scenario, policy->cur variable was last set inside 
acpi_cpufreq_cpu_init when cpufreq_add_dev made a call to 
cpufreq_driver->init(policy).

Are you able to reproduce this with 2.6.19-rc5-mm1? 

Because AFAICS, there ain't many changes w.r.t x86_64 acpi-cpufreq 
from 2.6.19-rc5-mm1 to 2.6.19-rc5-mm2. 

> 
> I've put the full config up at 
> http://www.reub.net/files/kernel/configs/2.6.19-rc5-mm1-brokencpufreq

I hope the name 2.6.19-rc5-'mm1'-brokencpufreq is by mistake :-)

> Disable cpufreq in the config and the kernel otherwise boots and works fine.
> 
> Reuben

regards,
gautham.
-- 
Gautham R Shenoy
Linux Technology Center
IBM India.
"Freedom comes with a price tag of responsibility, which is still a bargain,
because Freedom is priceless!"

Re: 2.6.19-rc5-mm2

[Andrew Morton]

On Tue, 14 Nov 2006 13:46:51 +0100
Mariusz Kozlowski <m.kozlowski@tuxland.pl> wrote:

> Hello,
> 
> 	On every box I tried I got this warning:
> 
> $ make 
> scripts/kconfig/conf -s arch/i386/Kconfig
> Warning! Found recursive dependency: INET IPV6 DLM (null) DLM_TCP INET

yup.  The GFS guys have since fixed that.

> Second thing: the same thing as with 2.6.19-rc5-mm1 happens:
> 
> > > > >   LD      .tmp_vmlinux1
> > > > > arch/x86_64/kernel/built-in.o(.init.text+0x31b7): In function
> > > > > `alternative_instructions': arch/i386/kernel/alternative.c:437: 
> undefined
> > > > > reference to `__stop_parainstructions'
> > > > > 
> arch/x86_64/kernel/built-in.o(.init.text+0x31be):arch/i386/kernel/alterna
> > > > >tive.c:437: undefined reference to `__start_parainstructions' make: ***
> > > > > [.tmp_vmlinux1] Error 1
> > > >
> > > > Thanks.  Please send me the .config and I'll see if it's still 
> happening.
> > > 
> > > Please find .config attached.
> > 
> > Thanks.  The paravirt patches have churned a bit recently and we appear to
> > have fixed this one.
> 
> Here it goes:
> 
>   LD      .tmp_vmlinux1
> arch/x86_64/kernel/built-in.o(.init.text+0x328f): In function 
> `alternative_instructions':
> arch/i386/kernel/alternative.c:437: undefined reference to 
> `__stop_parainstructions'
> arch/x86_64/kernel/built-in.o(.init.text+0x3296):arch/i386/kernel/alternative.c:437: 
> undefined reference to `__start_parainstructions'
> make: *** [.tmp_vmlinux1] Error 1

Strange, I don't get that with your .config.  I guess it's a binutils
difference.

This should fix it:


diff -puN arch/i386/kernel/alternative.c~fix-x86_64-mm-patch-inline-replacements-for arch/i386/kernel/alternative.c
--- a/arch/i386/kernel/alternative.c~fix-x86_64-mm-patch-inline-replacements-for
+++ a/arch/i386/kernel/alternative.c
@@ -381,10 +381,7 @@ void apply_paravirt(struct paravirt_patc
 extern struct paravirt_patch __start_parainstructions[],
 	__stop_parainstructions[];
 #else
-void apply_paravirt(struct paravirt_patch *start, struct paravirt_patch *end)
-{
-}
-extern struct paravirt_patch *__start_parainstructions, *__stop_parainstructions;
+#define apply_paravirt(start, end) do { } while (0)
 #endif	/* CONFIG_PARAVIRT */
 
 void __init alternative_instructions(void)
_

Re: 2.6.19-rc5-mm2

[Eric Dumazet]

On Tuesday 14 November 2006 10:41, Andrew Morton wrote:
> Presently at
>
> http://userweb.kernel.org/~akpm/2.6.19-rc5-mm2/
>
> and will appear later at
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc5/2.
>6.19-rc5-mm2/

Hi all

I noticed a slowdown (3%) on a io micro-benchmark on my machine with 
2.6.19-rc5-mm2

It appears time-uninline-jiffiesh.patch is sub-optimal at least for current 
compilers (tested gcc-4.0.4 here)

May I suggest :

1) make sure jiffies_to_usecs() is defined before being used in 
timespec_trunc() : Compiler will just optimize away not *needed* code.

OR :

2) Revert to inline versions of four functions jiffies_to_msecs(), 
jiffies_to_usecs(), msecs_to_jiffies() and usecs_to_jiffies() .

IMHO there is litle gain to call a function just to perform so basic 
arithmetics, that sometime compiler can perform at compilation time.

OR 

3) replace
	(jiffies_to_usecs(1) * 1000)
by
	(NSEC_PER_SEC / HZ)

With current patch, timespec_trunc() is not anymore a tail function.

struct timespec timespec_trunc(struct timespec t, unsigned gran)
{
        if (gran <= jiffies_to_usecs(1) * 1000) {

Much better here to have :

	if (gran < SOME_CONSTANT) 


Thank you
Eric

Re: 2.6.19-rc5-mm2

[Mariusz Kozlowski]

Hello, 

	Not sure if this is important. On 2 boxes I've seen a bunch of similar 
warnings. Please see the log:

http://tuxland.pl/misc/2.6.19-rc5-mm2-report.txt (211kB)

both boxes used 'allmodconfig' configuration. This is from one of them:

Linux orion 2.6.19-rc5-mm2 #1 PREEMPT Tue Nov 14 11:14:35 CET 2006 i686 
Intel(R) Pentium(R) 4 CPU 2.40GHz GenuineIntel GNU/Linux
 
Gnu C                  4.1.1
Gnu make               3.81
binutils               2.17
util-linux             2.12r
mount                  2.12r
module-init-tools      3.2.2
e2fsprogs              1.39
pcmciautils            014
pcmcia-cs              3.2.9
nfs-utils              1.0.6
Linux C Library        > libc.2.4
Dynamic linker (ldd)   2.4
Procps                 3.2.6
Net-tools              1.60
Kbd                    1.12
Sh-utils               6.4
udev                   087
wireless-tools         29
Modules Loaded         orinoco_cs orinoco hermes pcmcia firmware_class 8139too 
yenta_socket rsrc_nonstatic pcmcia_core

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 CPU 2.40GHz
stepping        : 9
cpu MHz         : 2392.531
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat 
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips        : 4786.53
clflush size    : 64

-- 
Regards,

	Mariusz Kozlowski

Re: 2.6.19-rc5-mm2

[Mariusz Kozlowski]

[-- Attachment #1: Type: text/plain, Size: 2803 bytes --]

Hello,

	On every box I tried I got this warning:

$ make 
scripts/kconfig/conf -s arch/i386/Kconfig
Warning! Found recursive dependency: INET IPV6 DLM (null) DLM_TCP INET

Second thing: the same thing as with 2.6.19-rc5-mm1 happens:

> > > >   LD      .tmp_vmlinux1
> > > > arch/x86_64/kernel/built-in.o(.init.text+0x31b7): In function
> > > > `alternative_instructions': arch/i386/kernel/alternative.c:437: 
undefined
> > > > reference to `__stop_parainstructions'
> > > > 
arch/x86_64/kernel/built-in.o(.init.text+0x31be):arch/i386/kernel/alterna
> > > >tive.c:437: undefined reference to `__start_parainstructions' make: ***
> > > > [.tmp_vmlinux1] Error 1
> > >
> > > Thanks.  Please send me the .config and I'll see if it's still 
happening.
> > 
> > Please find .config attached.
> 
> Thanks.  The paravirt patches have churned a bit recently and we appear to
> have fixed this one.

Here it goes:

  LD      .tmp_vmlinux1
arch/x86_64/kernel/built-in.o(.init.text+0x328f): In function 
`alternative_instructions':
arch/i386/kernel/alternative.c:437: undefined reference to 
`__stop_parainstructions'
arch/x86_64/kernel/built-in.o(.init.text+0x3296):arch/i386/kernel/alternative.c:437: 
undefined reference to `__start_parainstructions'
make: *** [.tmp_vmlinux1] Error 1

Linux p15198998 2.6.14.3-051207a #1 SMP Wed Dec 7 12:17:16 CET 2005 x86_64 
x86_64 x86_64 GNU/Linux
 
Gnu C                  3.3.5
Gnu make               3.80
binutils               2.15.94.0.2.2
util-linux             2.12q
mount                  2.12q
module-init-tools      3.2-pre1
e2fsprogs              1.36
jfsutils               1.1.7
reiserfsprogs          3.6.18
xfsprogs               2.6.25
quota-tools            3.12.
Linux C Library        x  1 root root 1446783 Jun 11  
2005 /lib64/tls/libc.so.6
Dynamic linker (ldd)   2.3.4
Linux C++ Library      5.0.7
Procps                 3.2.5
Net-tools              1.60
Kbd                    1.12
Sh-utils               5.3.0
udev                   053
Modules Loaded         thermal fan sg ide_cd cdrom dm_mod

processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 47
model name      : AMD Athlon(tm) 64 Processor 3200+
stepping        : 2
cpu MHz         : 1000.045
cache size      : 512 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 
3dnowext 3dnow pni lahf_lm
bogomips        : 2002.26
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc

Config attached ('allmodconfig' + CONFIG_KVM=n).

-- 
Regards,

	Mariusz Kozlowski

[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 70259 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-rc5-mm2
# Tue Nov 14 12:05:13 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
CONFIG_IPC_NS=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_UTS_NS=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_KEVENT=y
CONFIG_KEVENT_USER_STAT=y
CONFIG_KEVENT_TIMER=y
CONFIG_KEVENT_POLL=y
CONFIG_KEVENT_SOCKET=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_TASK_XACCT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ADAPTIVE_READAHEAD=y
CONFIG_READAHEAD_ALLOW_OVERHEADS=y
CONFIG_DEBUG_READAHEAD=y
CONFIG_READAHEAD_HIT_FEEDBACK=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y
CONFIG_NR_CPUS=8
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR_ALL=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y

#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
CONFIG_DISABLE_CONSOLE_SUSPEND=y
CONFIG_PM_SYSFS_DEPRECATED=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SUSPEND_SMP=y

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_SLEEP_PROC_SLEEP=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=m
CONFIG_ACPI_BAY=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_SONY=m
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_ACPI_CPUFREQ=m

#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_SPEEDSTEP_LIB=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE=y
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MULTITHREAD_PROBE=y
CONFIG_PCI_DEBUG=y
CONFIG_HT_IRQ=y

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_NETDEBUG=y
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
CONFIG_IP_ROUTE_MULTIPATH_RR=m
CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_DRR=m
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CONNTRACK_SECMARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
CONFIG_IP_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m

#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
CONFIG_NET_DCCPPROBE=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y

#
# TIPC Configuration (EXPERIMENTAL)
#
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_SLAVE_NODES=0
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
CONFIG_TIPC_DEBUG=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m

#
# Old SIR device drivers
#

#
# Old Serial dongle support
#

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
CONFIG_IEEE80211_SOFTMAC_DEBUG=y
CONFIG_WIRELESS_EXT=y
CONFIG_FIB_RULES=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_DEBUG_DRIVER=y
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
CONFIG_MTD_OBSOLETE_CHIPS=y
CONFIG_MTD_SHARP=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y

#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_NANDSIM=m

#
# OneNAND Flash Device Drivers
#
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OTP=y

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m

#
# Misc devices
#
CONFIG_IBM_ASM=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_MSI_LAPTOP=m

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=m

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_BLK_DEV_HD_IDE=y
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDEDMA_FORCED=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEDMA_ONLYDISK=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
CONFIG_WDC_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=m
CONFIG_HPT34X_AUTODMA=y
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_IVB=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_HD=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y

#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_ENABLE_RD_STRM=y
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_ARCMSR=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_OMIT_FLASHPOINT=y
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m

#
# PCMCIA SCSI adapter support
#
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m

#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=m
CONFIG_SATA_AHCI=m
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_ACPI=y
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_PLATFORM=m

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m

#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
CONFIG_IEEE1394_EXPORT_FULL_API=y

#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m

#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m

#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m

#
# PHY device support
#
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_PCNET32_NAPI=y
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
CONFIG_DGRS=m
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
CONFIG_SUNDANCE_MMIO=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_RHINE_NAPI=y
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
CONFIG_E1000_DISABLE_PACKET_SPLIT=y
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
CONFIG_SK98LIN=m
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m

#
# Ethernet (10000 Mbit)
#
CONFIG_CHELSIO_T1=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m

#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y

#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m

#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m

#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
CONFIG_ZD1211RW_DEBUG=y
CONFIG_ACX=m
CONFIG_ACX_PCI=y
CONFIG_ACX_USB=y
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m

#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y

#
# Cyclades-PC300 MLPPP support is disabled.
#

#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y

#
# ATM drivers
#
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
CONFIG_ATM_ENI_DEBUG=y
CONFIG_ATM_ENI_TUNE_BURST=y
CONFIG_ATM_ENI_BURST_TX_16W=y
CONFIG_ATM_ENI_BURST_TX_8W=y
CONFIG_ATM_ENI_BURST_TX_4W=y
CONFIG_ATM_ENI_BURST_TX_2W=y
CONFIG_ATM_ENI_BURST_RX_16W=y
CONFIG_ATM_ENI_BURST_RX_8W=y
CONFIG_ATM_ENI_BURST_RX_4W=y
CONFIG_ATM_ENI_BURST_RX_2W=y
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
CONFIG_ATM_ZATM_DEBUG=y
CONFIG_ATM_IDT77252=m
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
CONFIG_ATM_AMBASSADOR_DEBUG=y
CONFIG_ATM_HORIZON=m
CONFIG_ATM_HORIZON_DEBUG=y
CONFIG_ATM_IA=m
CONFIG_ATM_IA_DEBUG=y
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
CONFIG_ISDN=m

#
# Old ISDN4Linux
#
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y

#
# Active cards
#

#
# Siemens Gigaset
#
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_DEBUG=y
CONFIG_GIGASET_UNDOCREQ=y

#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#

#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m

#
# Active Eicon DIVA Server cards
#
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m

#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=m
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_MOXA_SMARTIO_NEW=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_SPECIALIX=m
CONFIG_SPECIALIX_RTSCTS=y
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_NOZOMI=m

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_TIPAR=m

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_RTC_IRQ=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m

#
# TPM devices
#
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m

#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y

#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m

#
# SPI Protocol Masters
#

#
# Dallas's 1-wire bus
#
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y

#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_HWMON_DEBUG_CHIP=y

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y

#
# Video Capture Adapters
#

#
# Video Capture Adapters
#
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_OSS=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CAFE_CCIC=m

#
# V4L USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_29XXX=y
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
CONFIG_USB_PWC_DEBUG=y

#
# Radio Adapters
#
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=m

#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m

#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=50

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y

#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m

#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m

#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUNER_MT2060=m

#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=m
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
CONFIG_FB_VGA16=m
CONFIG_FB_HGA=m
CONFIG_FB_HGA_ACCEL=y
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_INTEL=m
CONFIG_FB_INTEL_DEBUG=y
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_VIRTUAL=m

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_10x18=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_DETECT=y
CONFIG_SND_PCM_XRUN_DEBUG=y

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_AC97_POWER_SAVE=y

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m

#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m

#
# SoC audio support
#
CONFIG_SND_SOC=m

#
# SoC Platforms
#

#
# SoC Audio for the Atmel AT91
#

#
# SoC Audio for the Intel PXA2xx
#

#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_OSS_OBSOLETE_DRIVER=y
CONFIG_SOUND_BT878=m
CONFIG_SOUND_EMU10K1=m
CONFIG_MIDI_EMU10K1=y
CONFIG_SOUND_FUSION=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ICH=m
CONFIG_SOUND_TRIDENT=m
CONFIG_SOUND_MSNDCLAS=m
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
CONFIG_SOUND_VIA82CXXX=m
CONFIG_MIDI_VIA82CXXX=y
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_AD1816=m
CONFIG_SOUND_AD1889=m
CONFIG_SOUND_ADLIB=m
CONFIG_SOUND_ACI_MIXER=m
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_NM256=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
CONFIG_AEDSP16_MSS=y
# CONFIG_AEDSP16_SBPRO is not set
CONFIG_AEDSP16_MPU401=y
CONFIG_SOUND_TVMIXER=m
CONFIG_SOUND_KAHLUA=m

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_MULTITHREAD_PROBE=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDINPUT_POWERBOOK=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_TOUCHSCREEN_ETURBO=y
CONFIG_USB_TOUCHSCREEN_GUNZE=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
CONFIG_USB_KEYSPAN_REMOTE=m
CONFIG_USB_APPLETOUCH=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y

#
# USB port drivers
#
CONFIG_USB_USS720=m

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_QUATECH_ESU100=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_TEST=m
CONFIG_USB_GOTEMP=m

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m

#
# MMC/SD Card support
#
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m

#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m

#
# InfiniBand support
#
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_AMSO1100=m
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=m

#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_K8=m
CONFIG_EDAC_POLL=y

#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
CONFIG_RTC_INTF_DEV_UIE_EMUL=y

#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_V3020=m

#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m

#
# Auxiliary Display support
#
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_KVM=n

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=m
CONFIG_REISER4_FS=m
CONFIG_REISER4_DEBUG=y
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_CACHEFILES=m
CONFIG_CACHEFILES_DEBUG=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS_FS=m
CONFIG_JFFS_FS_VERBOSE=0
CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_CODA_FS_OLD_API=y
CONFIG_AFS_FS=m
CONFIG_AFS_FSCACHE=y
CONFIG_RXRPC=m
CONFIG_9P_FS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_TCP=y
# CONFIG_DLM_SCTP is not set
CONFIG_DLM_DEBUG=y

#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_LIST=y
CONFIG_FRAME_POINTER=y
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
CONFIG_PROFILE_LIKELY=y
CONFIG_FORCED_INLINING=y
CONFIG_DEBUG_SYNCHRO_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_LKDTM=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_DEBUG_RODATA=y
CONFIG_IOMMU_DEBUG=y
CONFIG_IOMMU_LEAK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_INTEGRITY=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_FS_CAPABILITIES=y
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19
CONFIG_SECURITY_SLIM=y
CONFIG_SECURITY_SLIM_BOOTPARAM=y
CONFIG_SECURITY_SLIM_BOOTPARAM_VALUE=1

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y

Re: 2.6.19-rc5-mm2

[Jiri Slaby]

Jiri Slaby wrote:
> Andrew Morton wrote:
>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc5/2.6.19-rc5-mm2/
> 
> 550 failed to change dir

No, only firefox got crazy.

thanks,
-- 
http://www.fi.muni.cz/~xslaby/            Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8  22A0 32CC 55C3 39D4 7A7E

Re: 2.6.19-rc5-mm2

[Reuben Farrelly]

On 14/11/2006 8:41 PM, Andrew Morton wrote:
> Presently at
> 
> http://userweb.kernel.org/~akpm/2.6.19-rc5-mm2/
> 
> and will appear later at
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc5/2.6.19-rc5-mm2/

Oops:

(davej cc'd - I think it's his specialty)

Linux version 2.6.19-rc5-mm2 (root@tornado.reub.net) (gcc version 4.1.1 20061108 
(Red Hat 4.1.1-35)) #1 SMP Tue Nov 14 21:56:04 EST 2006
Command line: ro root=/dev/md0 panic=60 console=ttyS0,57600
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 000000003f66d000 (usable)
  BIOS-e820: 000000003f66d000 - 000000003f6e8000 (ACPI NVS)
  BIOS-e820: 000000003f6e8000 - 000000003f6ec000 (usable)
  BIOS-e820: 000000003f6ec000 - 000000003f6ff000 (ACPI data)
  BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
end_pfn_map = 259840
DMI 2.3 present.
Zone PFN ranges:
   DMA             0 ->     4096
   DMA32        4096 ->  1048576
   Normal    1048576 ->  1048576
early_node_map[4] active PFN ranges
     0:        0 ->      159
     0:      256 ->   259693
     0:   259816 ->   259820
     0:   259839 ->   259840
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Nosave address range: 000000003f66d000 - 000000003f6e8000
Nosave address range: 000000003f6ec000 - 000000003f6ff000
Allocating PCI resources starting at 40000000 (gap: 3f700000:c0900000)
PERCPU: Allocating 33920 bytes of per cpu data
Built 1 zonelists.  Total pages: 253902
Kernel command line: ro root=/dev/md0 panic=60 console=ttyS0,57600
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:    8
... MAX_LOCK_DEPTH:          30
... MAX_LOCKDEP_KEYS:        2048
... CLASSHASH_SIZE:           1024
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      8192
... CHAINHASH_SIZE:          4096
  memory used by lock dependency info: 1328 kB
  per task-struct memory footprint: 1680 bytes
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
Memory: 1011700k/1039360k available (2635k kernel code, 25964k reserved, 1784k 
data, 240k init)
Calibrating delay using timer specific routine.. 6007.58 BogoMIPS (lpj=12015160)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12500426
Detected 12.500 MHz APIC timer.
lockdep: not fixing up alternatives.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5999.97 BogoMIPS (lpj=11999958)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
               Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Brought up 2 CPUs
testing NMI watchdog ... OK.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 3000.112 MHz processor.
migration_cost=9
checking if image is initramfs... it is
Freeing initrd memory: 1238k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12)
intel_rng: FWH not detected
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
PCI-GART: No AMD northbridge found.
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
   IO window: 2000-2fff
   MEM window: 48100000-481fffff
   PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
   IO window: disabled.
   MEM window: disabled.
   PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
   IO window: disabled.
   MEM window: disabled.
   PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
   IO window: disabled.
   MEM window: disabled.
   PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
   IO window: disabled.
   MEM window: disabled.
   PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
   IO window: 1000-1fff
   MEM window: 48000000-480fffff
   PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
IPv4 FIB: Using LC-trie version 0.407
TCP established hash table entries: 65536 (order: 9, 3670016 bytes)
TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
TCP: Hash tables configured (established 65536 bind 32768)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1163502407.084:1): initialized
SELinux:  Registering netfilter hooks
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
ACPI: Getting cpuindex for acpiid 0x3
ACPI: Getting cpuindex for acpiid 0x4
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
0000:06:03.0: ttyS1 at I/O 0x1000 (irq = 19) is a 16550A
0000:06:03.0: ttyS2 at I/O 0x1008 (irq = 19) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 4 RAM disks of 16384K size 1024 blocksize
Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
e1000: 0000:01:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:ce:4a:2c
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC20000016100 ctl 0x0 bmdma 0x0 irq 314
ata2: SATA max UDMA/133 cmd 0xFFFFC20000016180 ctl 0x0 bmdma 0x0 irq 314
ata3: SATA max UDMA/133 cmd 0xFFFFC20000016200 ctl 0x0 bmdma 0x0 irq 314
ata4: SATA max UDMA/133 cmd 0xFFFFC20000016280 ctl 0x0 bmdma 0x0 irq 314
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 586072368 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32)
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7, max UDMA/133, 586072368 sectors: LBA48 NCQ (depth 31/32)
ata3.00: ata3: dev 0 multi count 16
ata3.00: configured for UDMA/133
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      ST3300622AS      3.AA PQ: 0 ANSI: 5
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access     ATA      ST380817AS       3.42 PQ: 0 ANSI: 5
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back
  sdb: sdb1
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access     ATA      ST3300622AS      3.AA PQ: 0 ANSI: 5
SCSI device sdc: 586072368 512-byte hdwr sectors (300069 MB)
sdc: Write Protect is off
SCSI device sdc: drive cache: write back
SCSI device sdc: 586072368 512-byte hdwr sectors (300069 MB)
sdc: Write Protect is off
SCSI device sdc: drive cache: write back
  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 >
sd 2:0:0:0: Attached scsi disk sdc
sd 2:0:0:0: Attached scsi generic sg2 type 0
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ata5: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x30B0 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30B8 irq 15
scsi4 : ata_piix
ata5.00: ATAPI, max UDMA/66
ata5.00: configured for UDMA/66
scsi5 : ata_piix
ata6: port disabled. ignoring.
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata5.00: (BMDMA stat 0x24)
ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata5: soft resetting port
ata5.00: configured for UDMA/66
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata5.00: (BMDMA stat 0x24)
ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata5: soft resetting port
ata5.00: configured for UDMA/66
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata5.00: (BMDMA stat 0x24)
ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata5: soft resetting port
ata5.00: configured for UDMA/66
ata5: EH complete
ata5.00: limiting speed to UDMA/44
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata5.00: (BMDMA stat 0x24)
ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata5: soft resetting port
ata5.00: configured for UDMA/44
ata5: EH complete
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x482a0400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
USB Universal Host Controller Interface driver v3.0
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.19-rc5-mm2 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.19-rc5-mm2 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
ACPI: PCI Interrupt 0000:00:1d.2[C] -> <6>usb usb3: new device found, 
idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.19-rc5-mm2 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
ACPI: PCI Interrupt 0000:00:1d.3[D] -> <6>usb usb4: new device found, 
idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.19-rc5-mm2 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.19-rc5-mm2 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 2
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usb 2-2: new device found, idVendor=0451, idProduct=2046
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: raid1 personality registered for level 1
EDAC MC: Ver: 2.0.1 Nov 14 2006
usb 2-2: new device strings: Mfr=0, Product=0, SerialNumber=0
TCP bic registered
NET: Registered protocol family 1
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
NET: Registered protocol family 17
------------[ cut here ]------------
kernel BUG at drivers/cpufreq/cpufreq_userspace.c:138!
invalid opcode: 0000 [1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.19-rc5-mm2 #1
RIP: 0010:[<ffffffff80435299>]  [<ffffffff80435299>] 
cpufreq_governor_userspace+0x4e/0x1aa
RSP: 0000:ffff81003f61fb40  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff81003ef4a0d8 RCX: 0000000000000003
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff81003ef4a0d8
RBP: ffff81003f61fb60 R08: 0000000000000002 R09: 0000000000000001
R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000000
R13: 00000000ffffffea R14: 0000000000000000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffffffff80652000(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
Process swapper (pid: 1, threadinfo ffff81003f61e000, task ffff810037ff0040)
Stack:  ffff81003f61fb60 ffff81003ef4a0d8 0000000000000001 ffff81003ef4a0d8
  ffff81003f61fb90 ffffffff80433b11 ffffffff805d0e80 ffff81003f61fc20
  0000000000000000 ffff81003ef4a0d8 ffff81003f61fbc0 ffffffff80434278
Call Trace:
  [<ffffffff80433b11>] __cpufreq_governor+0x51/0x9b
  [<ffffffff80434278>] __cpufreq_set_policy+0xf8/0x13b
  [<ffffffff804343e9>] cpufreq_set_policy+0x3c/0x93
  [<ffffffff80435125>] cpufreq_add_dev+0x315/0x427
  [<ffffffff803b6f87>] sysdev_driver_register+0x87/0xdb
  [<ffffffff80434a8e>] cpufreq_register_driver+0x9e/0x120
  [<ffffffff806837b2>] acpi_cpufreq_init+0xbe/0xc9
  [<ffffffff802666c0>] init+0x160/0x31c
  [<ffffffff8025deb8>] child_rip+0xa/0x12


Code: 0f 0b eb fe 48 c7 c7 20 13 5d 80 e8 a6 c8 e2 ff 48 8d bb 28
RIP  [<ffffffff80435299>] cpufreq_governor_userspace+0x4e/0x1aa
  RSP <ffff81003f61fb40>
  <0>Kernel panic - not syncing: Attempted to kill init!
  <0>Rebooting in 60 seconds..

I've put the full config up at 
http://www.reub.net/files/kernel/configs/2.6.19-rc5-mm1-brokencpufreq

Disable cpufreq in the config and the kernel otherwise boots and works fine.

Reuben

Re: 2.6.19-rc5-mm2

[Jiri Slaby]

Andrew Morton wrote:
> Presently at

Maybe too early, but:

> http://userweb.kernel.org/~akpm/2.6.19-rc5-mm2/

404 not found

> and will appear later at
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc5/2.6.19-rc5-mm2/

550 failed to change dir

regards,
-- 
http://www.fi.muni.cz/~xslaby/            Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8  22A0 32CC 55C3 39D4 7A7E

2.6.19-rc5-mm2

[Andrew Morton]

Presently at

http://userweb.kernel.org/~akpm/2.6.19-rc5-mm2/

and will appear later at

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc5/2.6.19-rc5-mm2/



- Included the fault-injection patchset.  This is cool stuff and means that
  someone might actually be able to demonstrate a bug in the kernel.  Please
  play with it.

- A nasty Kconfig warning comes out during the build.  It's due to
  git-gfs2-nmw.patch.

- A few broken patches were dropped as a result of rc5-mm1 testing.   Thanks.




Boilerplate:

- See the `hot-fixes' directory for any important updates to this patchset.

- To fetch an -mm tree using git, use (for example)

  git-fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git tag v2.6.16-rc2-mm1
  git-checkout -b local-v2.6.16-rc2-mm1 v2.6.16-rc2-mm1

- -mm kernel commit activity can be reviewed by subscribing to the
  mm-commits mailing list.

        echo "subscribe mm-commits" | mail majordomo@vger.kernel.org

- If you hit a bug in -mm and it is not obvious which patch caused it, it is
  most valuable if you can perform a bisection search to identify which patch
  introduced the bug.  Instructions for this process are at

        http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt

  But beware that this process takes some time (around ten rebuilds and
  reboots), so consider reporting the bug first and if we cannot immediately
  identify the faulty patch, then perform the bisection search.

- When reporting bugs, please try to Cc: the relevant maintainer and mailing
  list on any email.

- When reporting bugs in this kernel via email, please also rewrite the
  email Subject: in some manner to reflect the nature of the bug.  Some
  developers filter by Subject: when looking for messages to read.

- Semi-daily snapshots of the -mm lineup are uploaded to
  ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/ and are announced on
  the mm-commits list.




Changes since 2.6.19-rc5-mm2:


 origin.patch
 git-acpi.patch
 git-alsa.patch
 git-agpgart.patch
 git-arm.patch
 git-cpufreq.patch
 git-powerpc.patch
 git-drm.patch
 git-dvb.patch
 git-gfs2-nmw.patch
 git-ia64.patch
 git-ieee1394.patch
 git-infiniband.patch
 git-input.patch
 git-libata-all.patch
 git-mips.patch
 git-mmc.patch
 git-mtd.patch
 git-netdev-all.patch
 git-net.patch
 git-ioat.patch
 git-ocfs2.patch
 git-pcmcia.patch
 git-r8169.patch
 git-selinux.patch
 git-pciseg.patch
 git-s390.patch
 git-scsi-misc.patch
 git-scsi-rc-fixes.patch
 git-scsi-target.patch
 git-sas.patch
 git-qla3xxx.patch
 git-watchdog.patch
 git-wireless.patch
 git-cryptodev.patch
 git-gccbug.patch

 git trees

-regression-in-2619-rc-microcode-driver.patch
-a-minor-fix-for-set_mb-in-documentation-memory-barrierstxt.patch
-nfsd4-reindent-do_open_lookup.patch
-nfsd4-fix-open-create-permissions.patch
-x86_64-mm-i386-reloc-data-4k-aligned.patch
-dm-fix-find_device-race.patch
-dm-suspend-fix-error-path.patch
-dm-multipath-fix-rr_add_path-order.patch
-dm-raid1-fix-waiting-for-io-on-suspend.patch
-dm-raid1-fix-waiting-for-io-on-suspend-fix.patch
-drivers-telephony-ixj-fix-an-array-overrun.patch
-tigran-has-moved.patch
-md-change-online-offline-events-to-a-single-change-event.patch
-md-fix-sizing-problem-with-raid5-reshape-and-config_lbd=n.patch
-md-do-not-freeze-md-threads-for-suspend.patch
-fix-kretprobe-booster-to-save-regs-and-set-status.patch
-backlight-and-output-sysfs-support-for-acpi-video-driver.patch
-fix-comments-style-in-acpi-videoc.patch
-fix-gregkh-driver-network-device.patch
-cpu-topology-consider-sysfs_create_group-return-value.patch
-debugfs-check-return-value-correctly.patch
-call-platform_notify_remove-later.patch
-tda826x-use-correct-max-frequency.patch
-ia64-select-acpi_numa-if-acpi.patch
-i8042-activate-panic-blink-only-in-x.patch
-drivers-cris-return-on-null-dev_alloc_skb.patch
-bonding-lockdep-annotation.patch
-com20020-build-fix.patch
-resend-iphase-64bit-cleanup.patch
-lockdep-annotate-sk_lock-nesting-in-af_bluetooth-v2.patch
-bnep-endianness-bug-filtering-by-packet-type.patch
-bnep-endianness-annotations.patch
-rfcomm-endianness-annotations.patch
-rfcomm-endianness-bug-param_mask-is-little-endian-on-the-wire.patch
-net-uninline-xfrm_selector_match.patch
-r8169-driver-corega-support-patch.patch
-pci-fix-__pci_register_driver-error-handling.patch
-acpiphp-fix-missing-acpiphp_glue_exit.patch
-acpiphp-fix-use-of-list_for_each-macro.patch
-fix-pci-sysfs-file-deletion.patch
-pci-check-szhi-when-sz-is-0-for-64-bit-pref-mem.patch
-drivers-scsi-mca_53c9xc-save_flags-cli-removal-fix.patch
-drivers-scsi-psi240ic-fix-an-array-overrun.patch
-fix-gregkh-usb-usb-expand-autosuspend-autoresume-api.patch
-correct-keymapping-on-powerbook-built-in-usb-iso-keyboards.patch
-usb-urb-unlink-free-clenup.patch
-i386-fix-recursive-faults-during-oops-when-current.patch
-x86-tif_notsc-and-seccomp-prctl.patch
-i386-mark-config_relocatable-experimental.patch
-prep-for-paravirt-be-careful-about-touching-bios.patch
-prep-for-paravirt-be-careful-about-touching-bios-warning-fix.patch
-paravirtualization-header-and-stubs-for-fix.patch
-paravirtualization-header-and-stubs-for-headers_check-fix.patch
-paravirtualization-patch-inline-replacements-for-fix-2.patch
-paravirtualization-patch-inline-replacements-for-fix-3.patch
-paravirtualization-more-generic-paravirtualization-warning-fix.patch
-i386-mm-substitute-__va-lookup-with-pfn_to_kaddr.patch
-i386-extend-bzimage-protocol-for-relocatable-protected-mode-kernel.patch
-htirq-refactor-so-we-only-have-one-function-that-writes-to-the-chip.patch
-htirq-allow-buggy-drivers-of-buggy-hardware-to-write-the-registers.patch
-htirq-allow-buggy-drivers-of-buggy-hardware-to-write-the-registers-update.patch
-x86_64-update-mmconfig-resource-insertion-to-check-against-e820-map.patch
-i386-update-mmconfig-resource-insertion-to-check-against-e820-map.patch
-fs-xfs-xfs_dmapih-removal-of-old-code.patch
-xfs-rename-uio_read.patch
-vmalloc-optimization-cleanup-bugfixes.patch
-vmalloc-optimization-cleanup-bugfixes-tweak.patch
-pci-i386-style-cleanups.patch
-setup_irq-better-mismatch-debugging.patch
-fix-ide-cs-hang-after-device-removal.patch
-patch-for-nvidia-divide-by-zero-error-for-7600.patch
-md-change-lifetime-rules-for-md-devices.patch

 Merged into mainline or a subsystem tree.

+setup_irq-better-mismatch-debugging.patch
+fix-via586-irq-routing-for-pirq-5.patch
+drivers-ide-stray-bracket.patch
+autofs4-panic-after-mount-fail.patch
+nvidiafb-fix-unreachable-code-in-nv10getconfig.patch
+usb-maintainers-updates.patch
+hugetlb-prepare_hugepage_range-check-offset-too.patch
+hugetlb-check-for-brk-entering-a-hugepage-region.patch
+ipmi-use-platform_device_add-instead-of-platform_device_register-to-register-device-allocated-dynamically.patch
+ia64-irqs-use-name-not-typename.patch

 2.6.19 queue (mostly)

-revert-generic_file_buffered_write-handle-zero-length-iovec-segments.patch
-revert-generic_file_buffered_write-deadlock-on-vectored-write.patch
-generic_file_buffered_write-cleanup.patch
-mm-only-mm-debug-write-deadlocks.patch
-mm-fix-pagecache-write-deadlocks.patch
-mm-fix-pagecache-write-deadlocks-comment.patch
-mm-fix-pagecache-write-deadlocks-xip.patch
-mm-fix-pagecache-write-deadlocks-mm-pagecache-write-deadlocks-efault-fix.patch
-fs-prepare_write-fixes.patch
-fs-prepare_write-fixes-fuse-fix.patch
-fs-prepare_write-fixes-jffs-fix.patch
-fs-prepare_write-fixes-fat-fix.patch

 These need more work.

-video-sysfs-support-take-2-add-dev-argument-for-backlight_device_register-msi-laptop-fix.patch

 Folded into video-sysfs-support-take-2-add-dev-argument-for-backlight_device_register.patch

+cpufreq-fix-bug-in-duplicate-freq-elimination-code-in-acpi-cpufreq.patch

 fix git-cpufreq

-git-cpufreq-build-fix.patch

 Unneeded

+cpufreq-select-consistently-re-2619-rc5-mm1.patch

 cpufreq Kconfig fix

-gregkh-driver-driver-core-add-notification-of-bus-events.patch
+gregkh-driver-debugfs-check-return-value-correctly.patch
+gregkh-driver-acpi-change-acpi-to-use-dev_archdata-instead-of-firmware_data.patch
+gregkh-driver-cpu-topology-consider-sysfs_create_group-return-value.patch
+gregkh-driver-sysfs-sysfs_write_file-writes-zero-terminated-data.patch
-gregkh-driver-uio.patch

 driver tree updates

+fix-gregkh-driver-sound-device.patch

 Fix it.

+aoe-add-forgotten-null-at-end-of-attribute-list-in-aoeblkc.patch

 AOE fix

+drm-fix-return-value-check.patch

 DRM fixlet.

+git-dvb-fixup.patch

 Fix rejects in dvt-dvb.

+drivers-media-handle-errors-from-input_register_device.patch

 DVB fixlet.
 
+jdelvare-i2c-i2c-dev-make-I2C_FUNCS-ioctl-faster.patch

 I2C tree update

+crash-on-evdev-disconnect.patch
+input-make-serio_register_driver-return-error.patch
+input-check-serio_register_driver-error.patch
+input-check-whether-serio-dirver-registration-is-completed.patch
+input-change-to-gfp_kernel-for-serio_register_driver-event-allocation.patch
+mac_emumousebtn-shouldnt-depend-on-input_adbhid.patch
+appletouch-improvements-for-macbook.patch

 input updates

+libata-convert-from-module_init-to-subsys_initcall-resend.patch
+sata_vsc-build-fix.patch
+hpt37x-check-the-enablebits.patch
+pata_artop-fix-1-typo.patch
+libata-change-order-of-_sdd-_gtf-execution-resend-3.patch

 sata/pata fixes and updates

+spidernet-remove-eth_zlen-check-in-earlier-patch.patch
+wan-dscc4-driver-requires-generic-hdlc.patch

 netdev updates

+tulip-dmfe-carrier-detection.patch

 Tulip fix

+fix-compat-space-msg-size-limit-for-msgsnd-msgrcv.patch

 compat cleanup/speedup/fix

+resend-iphase-64bit-cleanup.patch

 iphase driver 64-bit cleanup (might need more work)

-powerpc-add-efika-platform-support.patch

 Dropped

+powerpc-iseries-link-error-in-allmodconfig.patch

 powerpc build fix

+gregkh-pci-pci-make-some-msi-x-defines-generic.patch
+gregkh-pci-pci-save-restore-pci-x-state.patch
+gregkh-pci-pci-check-szhi-when-sz-is-0-when-64-bit-iomem-bigger-than-4g.patch
+gregkh-pci-acpiphp-fix-use-of-list_for_each-macro.patch
+gregkh-pci-acpiphp-fix-missing-acpiphp_glue_exit.patch
+gregkh-pci-pci-clear-osc-support-flags-if-no-_osc-method.patch
+gregkh-pci-pci-fix-__pci_register_driver-error-handling.patch
+gregkh-pci-pci-block-on-access-to-temporarily-unavailable-pci-device.patch
+gregkh-pci-pci-i386-style-cleanups.patch
+gregkh-pci-pci-arch-i386-kernel-pci-dma.c-ioremap-balanced-with-iounmap.patch

 PCI tree updates

+tidy-gregkh-pci-pci-check-szhi-when-sz-is-0-when-64-bit-iomem-bigger-than-4g.patch
+fix-gregkh-pci-pci-check-szhi-when-sz-is-0-when-64-bit-iomem-bigger-than-4g.patch
+fix-2-gregkh-pci-pci-check-szhi-when-sz-is-0-when-64-bit-iomem-bigger-than-4g.patch
+pci-quirks-fix-the-festering-mess-that-claims-to-handle-ide-quirks-ide-fix.patch

 Fix it.

+aic94xx-dont-call-pci_map_sg-for-already-mapped-scatterlists.patch

 SAS fix

-gregkh-usb-usb-storage-unusual_devs.h-entry-for-sony-ericsson-p990i.patch
+gregkh-usb-usb-correct-keymapping-on-powerbook-built-in-usb-iso-keyboards.patch
+gregkh-usb-usb-storage-unusual_devs.h-entry-for-sony-ericsson-p990i.patch
+gregkh-usb-usb-hid-core-add-quirk-for-new-apple-keyboard-trackpad.patch
+gregkh-usb-usb-storage-remove-duplicated-unusual_devs.h-entries-for-sony-ericsson-p990i.patch
+gregkh-usb-usb-fixed-outdated-usb_get_device_descriptor-documentation.patch
+gregkh-usb-usb-ipaq-add-htc-modem-support.patch
+gregkh-usb-usb-auerswald-possible-memleak-fix.patch
+gregkh-usb-usb-net1080-fix-typos.patch
+gregkh-usb-usb-move-private-hub-declarations-out-of-public-header-file.patch
+gregkh-usb-usb-gadget-ether.c-minor-manycast-tweaks.patch
+gregkh-usb-usb-resume_device-symbol-conflict.patch
+gregkh-usb-ehci-fix-memory-pool-name-allocation.patch
+gregkh-usb-ehci-fix-root-hub-and-port-suspend-resume-problems.patch
+gregkh-usb-usb-add-autosuspend-support-to-the-hub-driver.patch

 USB tree updates

-powerpc-add-of_platform-support-for-ohci-bigendian-hc.patch

 This broke.

+usb-writing_usb_driver-free-urb-cleanup.patch
+usb-pcwd_usb-free-urb-cleanup.patch
+usb-iforce-usb-free-urb-cleanup.patch
+usb-usb-gigaset-free-kill-urb-cleanup.patch
+usb-cinergyt2-free-kill-urb-cleanup.patch
+usb-ttusb_dec-free-urb-cleanup.patch
+usb-pvrusb2-hdw-free-unlink-urb-cleanup.patch
+usb-pvrusb2-io-free-urb-cleanup.patch
+usb-pwc-if-free-urb-cleanup.patch
+usb-sn9c102_core-free-urb-cleanup.patch
+usb-quickcam_messenger-free-urb-cleanup.patch
+usb-zc0301_core-free-urb-cleanup.patch
+usb-irda-usb-free-urb-cleanup.patch
+usb-zd1201-free-urb-cleanup.patch
+usb-ati_remote-free-urb-cleanup.patch
+usb-ati_remote2-free-urb-cleanup.patch
+usb-hid-core-free-urb-cleanup.patch
+usb-usbkbd-free-urb-cleanup.patch
+usb-auerswald-free-kill-urb-cleanup-and-memleak-fix.patch
+usb-phidgetkit-free-urb-cleanup.patch
+usb-legousbtower-free-kill-urb-cleanup.patch
+usb-phidgetmotorcontrol-free-urb-cleanup.patch
+usb-catc-free-urb-cleanup.patch
+usb-ftdi_sio-kill-urb-cleanup.patch
+usb-io_edgeport-kill-urb-cleanup.patch
+usb-keyspan-free-urb-cleanup.patch
+usb-kobil_sct-kill-urb-cleanup.patch
+usb-mct_u232-free-urb-cleanup.patch
+usb-navman-kill-urb-cleanup.patch
+usb-usb-serial-free-urb-cleanup.patch
+usb-visor-kill-urb-cleanup.patch
+usb-usbmidi-kill-urb-cleanup.patch
+usb-usbmixer-free-kill-urb-cleanup.patch
+nokia-e70-is-an-unusual-device.patch

 USB updates

-x86_64-mm-i386-pci-dma-iounmap.patch
-x86_64-mm-paravirt-skip-timer.patch
-x86_64-mm-paravirt-subarch-cleanup.patch
-x86_64-mm-paravirt-pte-update-common.patch
-x86_64-mm-paravirt-pte-update-prep.patch
-x86_64-mm-paravirt-header-cleanup.patch
+x86_64-mm-extend-bzimage-protocol-for-relocatable-protected-mode-kernel.patch
+x86_64-mm-mark-config_relocatable-experimental.patch
-x86_64-mm-gh-sync-tsc.patch
-x86_64-mm-paravirt-cpu-detect.patch
+x86_64-mm-amd-tsc-sync.patch
-x86_64-mm-header-and-stubs-for.patch
-x86_64-mm-paravirt-patch.patch
-x86_64-mm-paravirt-entry.patch
-x86_64-mm-paravirt-bug-skip.patch
-x86_64-mm-paravirt-no-legacy.patch
-x86_64-mm-paravirt-apic.patch
-x86_64-mm-paravirt-tlb.patch
-x86_64-mm-paravirt-broken.patch
-x86_64-mm-paravirt-compile.patch
-x86_64-mm-io-apic-cleanup.patch
+x86_64-mm-ptrace-compat-threadarea.patch
+x86_64-mm-pci-mcfg-reserve-e820.patch
+x86_64-mm-fix-boot-gdt-limit.patch
+x86_64-mm-substitute-__va-lookup-with-pfn_to_kaddr.patch
+x86_64-mm-e820-small-entries.patch
+x86_64-mm-i386-double-includes.patch
+x86_64-mm-header-and-stubs-for-paravirtualisation.patch
+x86_64-mm-patch-inline-replacements-for.patch
+x86_64-mm-more-generic-paravirtualization.patch
+x86_64-mm-allow-selected-bug-checks-to-be.patch
+x86_64-mm-allow-disabling-legacy-power.patch
+x86_64-mm-add-apic-accessors-to-paravirt-ops..patch
+x86_64-mm-add-mmu-virtualization-to.patch
+x86_64-mm-be-careful-about-touching-bios-address-space.patch
+x86_64-mm-genapic-offbyone.patch
+x86_64-mm-config-core2.patch

 x86 tree updates

-x86_64-mm-i386-reloc-abssym-hack.patch

 Dropped

+pda-percpu-init-make-arch-i386-kernel-cpu-commoncalloc_gdt-static.patch
+paravirt-mmu-header-movement.patch
+paravirt-cpu-detect.patch
+paravirt-pte-update-prep.patch
+paravirt-pte-update-common.patch
+revert-x86_64-mm-try-multiple-timer-pins.patch
+revert-x86_64-mm-try-multiple-timer-pins-wanring-fix.patch
+fix-x86_64-mm-i386-reloc-cleanup-align.patch
+i386-convert-more-absolute-symbols-to-section-relative.patch
+i386-add-write_pci_config_byte-to-direct-pci-access-routines.patch
+i386-introduce-the-mechanism-of-disabling-cpu-hotplug-control.patch
+i386-introduce-the-mechanism-of-disabling-cpu-hotplug-control-cleanup.patch
+x86_64-add-genapic_force.patch
+fix-the-irqbalance-quirk-for-e7320-e7520-e7525.patch
+i386-fix-machine_check-entry-point-in-entrys-to-not-dereference-kernel-memory-from-user-space-context.patch
+efi-calling-efi_get_time-during-suspend.patch
+arch-i386-kernel-io_apicc-handle-a-negative-return-value.patch
+genapic-optimize-fix-apic-mode-setup.patch
+make-arch-i386-kernel-io_apiccirq_vector-static.patch

 Various fixes against the x86 tree, and additional x86 and x86_64 fixes and
 updates.

+crypto-remove-one-too-many-semicolon-in-cryptoh.patch

 crypto cleanup/fix.

+mlock-cleanup.patch
+oom-can-panic-due-to-processes-stuck-in-__alloc_pages.patch

 MM udpates

+security-introduce-file-caps.patch
+security-introduce-file-caps-tweaks.patch
+security-introduce-file-caps-warning-fix.patch

 file-based capabilities

-gpio-framework-for-avr32.patch
-avr32-spi-ethernet-platform_device-update.patch
-avr32-move-spi-device-definitions-into-main-board.patch
-atmel-spi-driver.patch
-atmel-spi-driver-maintainers-entry.patch
-avr32-move-ethernet-tag-parsing-to-board-specific.patch
-atmel-macb-ethernet-driver.patch
-adapt-macb-driver-to-net_device-changes.patch

 Dropped.  These will come back via various other trees.

+drivers-add-lcd-support-update-8.patch

 More LCD driver updates

-add-shared-version-of-apm-emulation.patch
-arm-convert-to-use-shared-apm-emulation.patch
-mips-convert-to-use-shared-apm-emulation.patch

 These are being redone.

+hz-300hz-support.patch
+pcengines-wrap-led-support.patch
+pcengines-wrap-led-support-fix.patch
+driver-base-memoryc-remove-warnings-of.patch
+remove-kernel-syscalls.patch
+remove-kernel-syscalls-x86_64-fix.patch
+protect-ext2-ioctl-modifying-append_only-immutable-etc-with-i_mutex.patch
+remove-hash_highmem.patch
+retries-in-ext3_prepare_write-violate-ordering-requirements.patch
+ktime-fix-signed--unsigned-mismatch-in-ktime_to_ns.patch
+qconf-support-old-qt.patch
+remove-the-syslog-interface-when-printk-is-disabled.patch
+ver_linux-additions.patch

 Misc updates

+ext2-reservations.patch
+ext2-reservations-fix.patch
+ext2-reservations-sequential-read-regression-fix.patch
+ext2-reservations-filesystem-bogus-ENOSPC-with-reservation-fix.patch
+ext2-reservations-ext3_clear_inode-avoid-kfree-null.patch
+ext2-reservations-multile-block-allocate-little-endian-fixes.patch
+ext2-reservations-mark-group-descriptors-dirty-during-allocation.patch
+ext2-reservations-nuke-noisy-printk.patch
+ext2-reservations-bring-ext2-reservations-code-in-line-with-latest-ext3.patch

 Port the ext3 reservations code into ext2.

+tty_ioctl-use-termios-for-the-old-structure-and-termios2-update.patch
+termios-enable-new-style-termios-ioctls-on-x86-64.patch

 Update termios patches in -mm.

+char-istallion-fix-enabling.patch
+char-istallion-move-init-and-exit-code.patch
+char-istallion-change-init-sequence.patch
+char-istallion-dynamic-tty-device.patch
+char-istallion-use-mod_timer.patch
+char-cyclades-save-indent-levels.patch
+char-cyclades-lindent-the-code.patch
+char-cyclades-cleanup.patch
+char-cyclades-fix-warnings.patch

 More character driver cleanups.

+fault-injection-documentation-and-scripts.patch
+fault-injection-capabilities-infrastructure.patch
+fault-injection-capabilities-infrastructure-tidy.patch
+fault-injection-capabilities-infrastructure-tweaks.patch
+fault-injection-capability-for-kmalloc.patch
+fault-injection-capability-for-alloc_pages.patch
+fault-injection-capability-for-disk-io.patch
+fault-injection-process-filtering-for-fault-injection-capabilities.patch
+fault-injection-stacktrace-filtering.patch
+fault-injection-Kconfig-cleanup.patch
+fault-injection-stacktrace-filtering-kconfig-fix.patch

 Fault-injection framework and applications thereof.

+sched-fix-migration-cost-estimator.patch

 CPU scheduler fix.

+reiser4-update-comments-fix-write-and-truncate-cryptcompress.patch

 reiser4 update

+reiser4-temp-fix.patch

 Fix reiser4 for the dropping of the generic_file_write() patches.

-fbcon-rere-fix-little-endian-bogosity-in-slow_imageblit.patch

 Dropped, didnb't work right.

+fbmem-is-bootup-logo-broken-for-monochrome-lcd.patch

 Fix boot logo for 1bpp displays (needs work)

+md-allow-reads-that-have-bypassed-the-cache-to-be-retried-on-failure-misc-fixes-for-aligned-read-handling-including-raid6-read-corruption.patch
+md-allow-reads-that-have-bypassed-the-cache-to-be-retried-on-failure-misc-fixes-for-error-handling-of-aligned-reads.patch
+md-fix-innocuous-bug-in-raid6-stripe_to_pdidx.patch
+md-change-lifetime-rules-for-md-devices.patch

 RAID updates

+gtod-persistent-clock-support-i386-i386-unexport-read_persistent_clock.patch
 hrtimers-namespace-and-enum-cleanup.patch
-hrtimers-state-tracking.patch
-hrtimers-clean-up-callback-tracking.patch
-hrtimers-move-and-add-documentation.patch
-clockevents-core.patch
-clockevents-drivers-for-i386.patch
-high-res-timers-core.patch
-gtod-mark-tsc-unusable-for-highres-timers.patch
-dynticks-core.patch
-dynticks-add-nohz-stats-to-proc-stat.patch
-dynticks-i386-arch-code.patch
-high-res-timers-dynticks-enable-i386-support.patch
-debugging-feature-timer-stats.patch
-highres-timer-core-fix-status-check.patch
-highres-timer-core-fix-commandline-setup.patch
-clockevents-smp-on-up-features.patch
-highres-depend-on-clockevents.patch
-i386-apic-cleanup.patch
-pm-timer-allow-early-access.patch
-i386-lapic-timer-calibration.patch
-clockevents-add-broadcast-support.patch
-clockevents-add-broadcast-support-fix.patch
-acpi-include-apic-h.patch
-acpi-include-apic-h-fix.patch
-acpi-keep-track-of-timer-broadcast.patch
-i386-apic-timer-use-clockevents-broadcast.patch
-acpi-verify-lapic-timer.patch
-acpi-verify-lapic-timer-exports.patch
-acpi-verify-lapic-timer-fix.patch
+updated-hrtimers-state-tracking.patch
+updated-hrtimers-clean-up-callback-tracking.patch
+updated-hrtimers-move-and-add-documentation.patch
+updated-add-a-framework-to-manage-clock-event-devices.patch
+updated-acpi-include-apich.patch
+updated-acpi-keep-track-of-timer-broadcast.patch
+updated-acpi-add-state-propagation-for-dynamic-broadcasting.patch
+updated-i386-cleanup-apic-code.patch
+updated-i386-convert-to-clock-event-devices.patch
+updated-i386-convert-to-clock-event-devices-fix.patch
+updated-i386-convert-to-clock-event-devices-arch-i386-kernel-apicc-make-a-function-static.patch
+updated-pm_timer-allow-early-access-and-move-externs-to-a-header-file.patch
+updated-i386-rework-local-apic-calibration.patch
+updated-high-res-timers-core.patch
+updated-gtod-mark-tsc-unusable-for-highres-timers.patch
+updated-dynticks-core-code.patch
+updated-dyntick-add-nohz-stats-to-proc-stat.patch
+updated-dynticks-i386-arch-code.patch
+updated-dynticks-fix-nmi-watchdog.patch
+updated-high-res-timers-dynticks-enable-i386-support.patch
+updated-debugging-feature-timer-stats.patch
+clockevents-core-check-for-clock-event-device-handler-being-non-null-before-calling-it.patch

 Updated/fixed/reworked/redone hrtimer and dynticks patches.

+kvm-virtualization-infrastructure-include-desch.patch
+kvm-virtualization-infrastructure-fix-segment-state-changes-across-processor-mode-switches.patch
+kvm-virtualization-infrastructure-fix-asm-constraints-for-segment-loads.patch
+kvm-vcpu-creation-and-maintenance-segment-access-cleanup.patch
+kvm-avoid-using-vmx-instruction-directly.patch
+kvm-avoid-using-vmx-instruction-directly-fix-asm-constraints.patch

 Update KVM patches in -mm.



All 1327 patches:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc5/2.6.19-rc5-mm2/patch-list