From: Bjorn Helgaas <bjorn.helgaas@hp.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Mel Gorman <mel@csn.ul.ie>
Subject: Re: 2.6.21-rc3-mm2 (oops in move_freepages)
Date: Tue, 13 Mar 2007 21:52:09 -0600 [thread overview]
Message-ID: <200703132152.10136.bjorn.helgaas@hp.com> (raw)
In-Reply-To: <20070307201915.4d579113.akpm@linux-foundation.org>
FYI, I'm seeing the following oops with 2.6.21-rc3-mm1 (and -mm2)
on the HP rx2600 and an Intel Tiger (both ia64 boxes).
I haven't investigated this other than to determine that it
does not occur with 2.6.21-rc3 or 2.6.20-rc3-mm1, and the
instruction at move_freepages+0x10 is a load of the value
pointed to by the third argument (end_page).
Linux version 2.6.21-rc3-mm1 (helgaas@tiger) (gcc version 4.0.3 (Debian 4.0.3-1)) #2 SMP Tue Mar 13 16:16:22 MST 2007
...
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=53
scsi 0:0:0:0: Direct-Access HP 36.4G ST336706LC HP04 PQ: 0 ANSI: 2
target0:0:0: Beginning Domain Validation
target0:0:0: Ending Domain Validation
target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
Unable to handle kernel paging request at virtual address a0007fffc7580000
swapper[1]: Oops 8813272891392 [1]
Modules linked in:
Pid: 1, CPU 1, comm: swapper
psr : 00001010085a2010 ifs : 800000000000040b ip : [<a0000001000fe5d0>] Not
tainted
ip is at move_freepages+0x10/0x340
unat: 0000000000000000 pfs : 000000000000030a rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr : 000000000000a581
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a74433f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001000fea10 b6 : a0000001005ad980 b7 : a00000010000bb20
f6 : 1003e0000000000000000 f7 : 1003ed37a6f4de9bd37a7
f8 : 1003e0000000000000000 f9 : 1003e0000000194a0cb8b
f10 : 1003e70658ddf530a940d f11 : 1003e0000000000000000
r1 : a000000100dfe280 r2 : 0000000000000000 r3 : 0000000000000000
r8 : 0000000000000000 r9 : 0000000000004000 r10 : ffffffffffff0000
r11 : 0000000000020000 r12 : e00000406004fc10 r13 : e000004060048000
r14 : 0000000000010000 r15 : 000000000001c000 r16 : 0000000000040000
r17 : 0000000000000400 r18 : a0007fffc7200000 r19 : 0000000000004000
r20 : ffffffffffff4000 r21 : 00002fffffff4000 r22 : ffffd00000000000
r23 : 000000005fff4000 r24 : 00002fffa0000000 r25 : 0000000063180000
r26 : 000000000318c000 r27 : 0000000000c5c000 r28 : 00000000000c4000
r29 : 0000000000080000 r30 : 000000000003fc00 r31 : 00000000000e0000
Call Trace:
[<a000000100014840>] show_stack+0x40/0xa0
sp=e00000406004f7c0 bsp=e0000040600496f8
[<a000000100015120>] show_regs+0x880/0x8a0
sp=e00000406004f990 bsp=e0000040600496a0
[<a0000001000387c0>] die+0x1c0/0x2c0
sp=e00000406004f990 bsp=e000004060049658
[<a00000010005e1e0>] ia64_do_page_fault+0x820/0x9c0
sp=e00000406004f9b0 bsp=e000004060049608
[<a00000010000c320>] ia64_leave_kernel+0x0/0x270
sp=e00000406004fa40 bsp=e000004060049608
[<a0000001000fe5d0>] move_freepages+0x10/0x340
sp=e00000406004fc10 bsp=e0000040600495a8
[<a0000001000fea10>] move_freepages_block+0x110/0x140
sp=e00000406004fc10 bsp=e000004060049578
[<a0000001000fef20>] __rmqueue+0x4e0/0x7e0
sp=e00000406004fc10 bsp=e000004060049518
[<a0000001000ff270>] rmqueue_bulk+0x50/0x120
sp=e00000406004fc10 bsp=e0000040600494d0
[<a0000001000ff7a0>] get_page_from_freelist+0x460/0xd40
sp=e00000406004fc10 bsp=e000004060049420
[<a0000001001016e0>] __alloc_pages+0xa0/0x580
sp=e00000406004fc10 bsp=e0000040600493a8
[<a000000100147df0>] kmem_getpages+0x150/0x3a0
sp=e00000406004fc20 bsp=e000004060049370
[<a00000010014b200>] cache_grow+0x1e0/0x640
sp=e00000406004fc30 bsp=e000004060049308
[<a00000010014baf0>] cache_alloc_refill+0x490/0x580
sp=e00000406004fc30 bsp=e0000040600492a0
[<a00000010014ca80>] kmem_cache_alloc+0x120/0x1e0
sp=e00000406004fc30 bsp=e000004060049270
[<a0000001005af6f0>] sd_revalidate_disk+0x90/0x1c20
sp=e00000406004fc30 bsp=e0000040600491f0
[<a0000001005b1d20>] sd_probe+0x6c0/0x7c0
sp=e00000406004fc70 bsp=e000004060049198
[<a0000001004c3650>] driver_probe_device+0x230/0x360
sp=e00000406004fc80 bsp=e000004060049160
[<a0000001004c37b0>] __device_attach+0x30/0x60
sp=e00000406004fc80 bsp=e000004060049138
[<a0000001004c1480>] bus_for_each_drv+0x80/0x120
sp=e00000406004fc80 bsp=e000004060049100
[<a0000001004c3f50>] device_attach+0x190/0x200
sp=e00000406004fca0 bsp=e0000040600490c8
[<a0000001004c1660>] bus_attach_device+0x80/0x160
sp=e00000406004fca0 bsp=e000004060049090
[<a0000001004be7e0>] device_add+0x940/0xf60
sp=e00000406004fca0 bsp=e000004060049028
[<a00000010057daa0>] scsi_sysfs_add_sdev+0x60/0x520
sp=e00000406004fca0 bsp=e000004060048fd8
[<a000000100578e20>] scsi_probe_and_add_lun+0x1000/0x1200
sp=e00000406004fca0 bsp=e000004060048f68
[<a000000100579bf0>] __scsi_scan_target+0x150/0xae0
sp=e00000406004fcd0 bsp=e000004060048f10
[<a00000010057a5e0>] scsi_scan_channel+0x60/0xe0
sp=e00000406004fd30 bsp=e000004060048ed0
[<a00000010057a790>] scsi_scan_host_selected+0x130/0x200
sp=e00000406004fd30 bsp=e000004060048e88
[<a00000010057a9d0>] do_scsi_scan_host+0x170/0x1a0
sp=e00000406004fd30 bsp=e000004060048e60
[<a00000010057acd0>] scsi_scan_host+0x2d0/0x320
sp=e00000406004fd30 bsp=e000004060048e18
[<a0000001005ca2c0>] mptspi_probe+0x680/0x6e0
sp=e00000406004fd30 bsp=e000004060048dc8
[<a0000001003fdd10>] pci_device_probe+0x270/0x3a0
sp=e00000406004fd30 bsp=e000004060048d88
[<a0000001004c3650>] driver_probe_device+0x230/0x360
sp=e00000406004fd80 bsp=e000004060048d50
[<a0000001004c3a40>] __driver_attach+0x100/0x1a0
sp=e00000406004fd80 bsp=e000004060048d20
[<a0000001004c1260>] bus_for_each_dev+0x80/0x100
sp=e00000406004fd80 bsp=e000004060048ce8
[<a0000001004c3060>] driver_attach+0x40/0x60
sp=e00000406004fda0 bsp=e000004060048cc8
[<a0000001004c2130>] bus_add_driver+0xf0/0x3a0
sp=e00000406004fda0 bsp=e000004060048c88
[<a0000001004c4540>] driver_register+0x160/0x180
sp=e00000406004fda0 bsp=e000004060048c68
[<a0000001003fce80>] __pci_register_driver+0xc0/0x140
sp=e00000406004fda0 bsp=e000004060048c30
[<a00000010090c840>] mptspi_init+0x180/0x1c0
sp=e00000406004fdb0 bsp=e000004060048c10
[<a0000001008d5580>] init+0x420/0x6c0
sp=e00000406004fdb0 bsp=e000004060048bd8
[<a0000001000134d0>] kernel_thread_helper+0xd0/0x100
sp=e00000406004fe30 bsp=e000004060048bb0
[<a0000001000094c0>] start_kernel_thread+0x20/0x40
sp=e00000406004fe30 bsp=e000004060048bb0
next prev parent reply other threads:[~2007-03-14 3:52 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-08 4:19 2.6.21-rc3-mm2 Andrew Morton
2007-03-08 7:39 ` [PATCH] fix BUG_ON check at move_freepages() (Re: 2.6.21-rc3-mm2) Yasunori Goto
2007-03-08 11:01 ` Mel Gorman
2007-03-08 14:52 ` 2.6.21-rc3-mm2 Con Kolivas
2007-03-08 21:04 ` 2.6.21-rc3-mm2 Con Kolivas
2007-03-08 21:56 ` 2.6.21-rc3: /proc broken Con Kolivas
2007-03-09 8:53 ` Russell King
2007-03-09 9:59 ` Con Kolivas
2007-03-12 12:56 ` 2.6.21-rc3-mm2 hangs my opteron during bootup, ACPI? Helge Hafting
2007-03-12 13:25 ` Luming Yu
2007-03-12 19:56 ` Len Brown
2007-03-17 0:10 ` Helge Hafting
2007-03-14 3:52 ` Bjorn Helgaas [this message]
2007-03-14 9:44 ` 2.6.21-rc3-mm2 (oops in move_freepages) Mel Gorman
2007-03-14 15:11 ` Bjorn Helgaas
2007-03-14 16:13 ` Mel Gorman
2007-03-14 16:52 ` Bjorn Helgaas
2007-03-14 17:21 ` Mel Gorman
2007-03-14 18:36 ` Bjorn Helgaas
2007-03-14 18:59 ` Mel Gorman
2007-03-14 20:46 ` Bjorn Helgaas
2007-03-14 20:55 ` Mel Gorman
2007-03-14 19:10 ` [PATCH] Avoid unsafe use of struct pages in move_freepages when CONFIG_HOLES_IN_ZONE is set Mel Gorman
[not found] ` <200703141457.06489.bjorn.helgaas@hp.com>
2007-03-15 1:14 ` 2.6.21-rc3-mm2 (BUG in pci_restore_state()) Eric W. Biederman
2007-03-19 19:17 ` 2.6.21-rc3-mm2 Randy Dunlap
2007-03-19 19:55 ` 2.6.21-rc3-mm2 Andrew Morton
2007-03-19 23:01 ` 2.6.21-rc3-mm2 Kay Sievers
2007-03-19 19:40 ` 2.6.21-rc3-mm2 Randy Dunlap
2007-03-19 22:26 ` [PATCH] ptrace needs PROC_FS Randy Dunlap
2007-03-19 22:48 ` Roland McGrath
2007-03-20 11:18 ` Pavel Machek
2007-03-20 0:27 ` 2.6.21-rc3-mm2 Randy Dunlap
2007-03-20 0:39 ` 2.6.21-rc3-mm2 Andrew Morton
2007-03-20 0:51 ` 2.6.21-rc3-mm2 Randy Dunlap
2007-03-20 18:51 ` 2.6.21-rc3-mm2 Roland McGrath
2007-03-20 12:14 ` 2.6.21-rc3-mm2 Sam Ravnborg
2007-03-20 15:43 ` 2.6.21-rc3-mm2 Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200703132152.10136.bjorn.helgaas@hp.com \
--to=bjorn.helgaas@hp.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mel@csn.ul.ie \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®