From: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
To: jeff@garzik.org
Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-ide@vger.kernel.org, htejun@gmail.com,
akpm@linux-foundation.org
Subject: [patch 7/7] libata: send event when AN received - resend
Date: Fri, 4 May 2007 11:18:16 -0700 [thread overview]
Message-ID: <20070504111816.bf25955e.kristen.c.accardi@intel.com> (raw)
In-Reply-To: <20070424090910.1d145c24@the-village.bc.nu>
When we get an SDB FIS with the 'N' bit set, we should send
an event to user space to indicate that there has been a
media change. This will be done via the block device.
changed from last version:
* Make sure that port_addr is within ATA_MAX_DEVICES
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Index: 2.6-git/drivers/ata/ahci.c
===================================================================
--- 2.6-git.orig/drivers/ata/ahci.c
+++ 2.6-git/drivers/ata/ahci.c
@@ -1147,6 +1147,28 @@ static void ahci_host_intr(struct ata_po
return;
}
+ if (status & PORT_IRQ_SDB_FIS) {
+ /*
+ * if this is an ATAPI device with AN turned on,
+ * then we should interrogate the device to
+ * determine the cause of the interrupt
+ *
+ * for AN - this we should check the SDB FIS
+ * and find the I and N bits set
+ */
+ const u32 *f = pp->rx_fis + RX_FIS_SDB;
+
+ /* check the 'N' bit in word 0 of the FIS */
+ if (f[0] & (1 << 15)) {
+ int port_addr = ((f[0] & 0x00000f00) >> 8);
+ struct ata_device *adev;
+ if (port_addr < ATA_MAX_DEVICES) {
+ adev = &ap->device[port_addr];
+ if (adev->flags & ATA_DFLAG_AN)
+ ata_scsi_media_change_notify(adev);
+ }
+ }
+ }
if (ap->sactive)
qc_active = readl(port_mmio + PORT_SCR_ACT);
else
Index: 2.6-git/include/linux/libata.h
===================================================================
--- 2.6-git.orig/include/linux/libata.h
+++ 2.6-git/include/linux/libata.h
@@ -737,6 +737,7 @@ extern void ata_host_init(struct ata_hos
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
+extern void ata_scsi_media_change_notify(struct ata_device *atadev);
extern void ata_sas_port_destroy(struct ata_port *);
extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
struct ata_port_info *, struct Scsi_Host *);
Index: 2.6-git/drivers/ata/libata-scsi.c
===================================================================
--- 2.6-git.orig/drivers/ata/libata-scsi.c
+++ 2.6-git/drivers/ata/libata-scsi.c
@@ -3057,6 +3057,22 @@ static void ata_scsi_remove_dev(struct a
}
/**
+ * ata_scsi_media_change_notify - send media change event
+ * @atadev: Pointer to the disk device with media change event
+ *
+ * Tell the block layer to send a media change notification
+ * event.
+ *
+ * LOCKING:
+ * interrupt context, may not sleep.
+ */
+void ata_scsi_media_change_notify(struct ata_device *atadev)
+{
+ genhd_media_change_notify(atadev->sdev->disk);
+}
+EXPORT_SYMBOL_GPL(ata_scsi_media_change_notify);
+
+/**
* ata_scsi_hotplug - SCSI part of hotplug
* @work: Pointer to ATA port to perform SCSI hotplug on
*
next prev parent reply other threads:[~2007-05-04 18:20 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20070424074856.005152262@intel.com>
2007-04-23 23:59 ` [patch 1/7] libata: check for AN support Kristen Carlson Accardi
2007-04-24 8:03 ` Tejun Heo
2007-04-24 15:54 ` Kristen Carlson Accardi
2007-04-24 8:07 ` Alan Cox
2007-04-24 10:23 ` Olivier Galibert
2007-04-24 15:49 ` Kristen Carlson Accardi
2007-04-24 18:05 ` Olivier Galibert
2007-04-24 18:29 ` Kristen Carlson Accardi
2007-04-24 20:53 ` Kristen Carlson Accardi
2007-04-25 0:49 ` Olivier Galibert
2007-04-25 17:55 ` Kristen Carlson Accardi
2007-04-25 18:40 ` Kristen Carlson Accardi
2007-04-25 19:16 ` Matt Sealey
2007-04-25 20:34 ` Kristen Carlson Accardi
2007-04-25 20:59 ` Matt Sealey
2007-04-25 20:40 ` Olivier Galibert
2007-05-04 18:14 ` [patch 1/7] libata: check for AN support - resend Kristen Carlson Accardi
2007-04-23 23:59 ` [patch 2/7] genhd: expose AN to user space Kristen Carlson Accardi
2007-04-24 8:05 ` Tejun Heo
2007-04-24 21:30 ` Kristen Carlson Accardi
2007-05-04 18:15 ` [patch 2/7] genhd: expose AN to user space - resend Kristen Carlson Accardi
2007-04-23 23:59 ` [patch 3/7] scsi: expose AN to user space Kristen Carlson Accardi
2007-04-24 0:00 ` [patch 4/7] libata: " Kristen Carlson Accardi
2007-04-24 0:00 ` [patch 5/7] genhd: send async notification on media change Kristen Carlson Accardi
2007-04-24 8:20 ` Tejun Heo
2007-04-24 21:36 ` Kristen Carlson Accardi
2007-05-04 18:17 ` Kristen Carlson Accardi
2007-04-24 0:00 ` [patch 6/7] SCSI: save disk in scsi_device Kristen Carlson Accardi
2007-04-24 0:00 ` [patch 7/7] libata: send event when AN received Kristen Carlson Accardi
2007-04-24 8:09 ` Alan Cox
2007-04-24 21:38 ` Kristen Carlson Accardi
2007-05-04 18:18 ` Kristen Carlson Accardi [this message]
2007-05-04 18:16 ` [patch 3/7] scsi: expose AN to user space - resend Kristen Carlson Accardi
2007-05-04 18:16 ` [patch 4/7] libata: " Kristen Carlson Accardi
2007-05-04 18:17 ` [patch 6/7] SCSI: save disk in scsi_device " Kristen Carlson Accardi
2007-05-04 20:30 ` James Bottomley
2007-05-07 15:29 ` Kristen Carlson Accardi
2007-05-09 22:50 ` Kristen Carlson Accardi
2007-05-09 23:04 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070504111816.bf25955e.kristen.c.accardi@intel.com \
--to=kristen.c.accardi@intel.com \
--cc=akpm@linux-foundation.org \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®