From: Ingo Molnar <mingo@elte.hu>
To: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>,
Torsten Kaiser <just.for.lkml@googlemail.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Christoph Lameter <clameter@sgi.com>
Subject: Re: Linux 2.6.25-rc2
Date: Tue, 19 Feb 2008 15:57:19 +0100 [thread overview]
Message-ID: <20080219145719.GA22898@elte.hu> (raw)
In-Reply-To: <20080219145554.GE21176@elte.hu>
* Ingo Molnar <mingo@elte.hu> wrote:
> If this (or my other patch) indeed solves the problem i'd still favor
> a full revert of the SLUB_FASTPATH (commit 1f84260c8ce3b1ce26d4), it
> looks quite un-cooked and quite un-tested for multiple independent
> reasons.
>
> Sigh, why do i again have to be the messenger who brings the bad news
> to SLUB land, and again when poor Christoph went on vacation? :-/
the revert patch is below. (manually done due to other changes since
1f84260c8ce3b1ce26d4 was commited, but trivial)
Ingo
----------------->
Subject: slub: fastpath optimization revert
From: Ingo Molnar <mingo@elte.hu>
Date: Tue Feb 19 15:46:37 CET 2008
revert:
commit 1f84260c8ce3b1ce26d4c1d6dedc2f33a3a29c0c
Author: Christoph Lameter <clameter@sgi.com>
Date: Mon Jan 7 23:20:30 2008 -0800
SLUB: Alternate fast paths using cmpxchg_local
it was causing problems (crashes) and was incomplete.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
mm/slub.c | 87 --------------------------------------------------------------
1 file changed, 87 deletions(-)
Index: linux-x86.q/mm/slub.c
===================================================================
--- linux-x86.q.orig/mm/slub.c
+++ linux-x86.q/mm/slub.c
@@ -149,13 +149,6 @@ static inline void ClearSlabDebug(struct
/* Enable to test recovery from slab corruption on boot */
#undef SLUB_RESILIENCY_TEST
-/*
- * Currently fastpath is not supported if preemption is enabled.
- */
-#if defined(CONFIG_FAST_CMPXCHG_LOCAL) && !defined(CONFIG_PREEMPT)
-#define SLUB_FASTPATH
-#endif
-
#if PAGE_SHIFT <= 12
/*
@@ -1514,11 +1507,6 @@ static void *__slab_alloc(struct kmem_ca
{
void **object;
struct page *new;
-#ifdef SLUB_FASTPATH
- unsigned long flags;
-
- local_irq_save(flags);
-#endif
if (!c->page)
goto new_slab;
@@ -1541,9 +1529,6 @@ load_freelist:
unlock_out:
slab_unlock(c->page);
stat(c, ALLOC_SLOWPATH);
-#ifdef SLUB_FASTPATH
- local_irq_restore(flags);
-#endif
return object;
another_slab:
@@ -1575,9 +1560,6 @@ new_slab:
c->page = new;
goto load_freelist;
}
-#ifdef SLUB_FASTPATH
- local_irq_restore(flags);
-#endif
/*
* No memory available.
*
@@ -1619,34 +1601,6 @@ static __always_inline void *slab_alloc(
{
void **object;
struct kmem_cache_cpu *c;
-
-/*
- * The SLUB_FASTPATH path is provisional and is currently disabled if the
- * kernel is compiled with preemption or if the arch does not support
- * fast cmpxchg operations. There are a couple of coming changes that will
- * simplify matters and allow preemption. Ultimately we may end up making
- * SLUB_FASTPATH the default.
- *
- * 1. The introduction of the per cpu allocator will avoid array lookups
- * through get_cpu_slab(). A special register can be used instead.
- *
- * 2. The introduction of per cpu atomic operations (cpu_ops) means that
- * we can realize the logic here entirely with per cpu atomics. The
- * per cpu atomic ops will take care of the preemption issues.
- */
-
-#ifdef SLUB_FASTPATH
- c = get_cpu_slab(s, raw_smp_processor_id());
- do {
- object = c->freelist;
- if (unlikely(is_end(object) || !node_match(c, node))) {
- object = __slab_alloc(s, gfpflags, node, addr, c);
- break;
- }
- stat(c, ALLOC_FASTPATH);
- } while (cmpxchg_local(&c->freelist, object, object[c->offset])
- != object);
-#else
unsigned long flags;
local_irq_save(flags);
@@ -1661,7 +1615,6 @@ static __always_inline void *slab_alloc(
stat(c, ALLOC_FASTPATH);
}
local_irq_restore(flags);
-#endif
if (unlikely((gfpflags & __GFP_ZERO) && object))
memset(object, 0, c->objsize);
@@ -1698,11 +1651,6 @@ static void __slab_free(struct kmem_cach
void **object = (void *)x;
struct kmem_cache_cpu *c;
-#ifdef SLUB_FASTPATH
- unsigned long flags;
-
- local_irq_save(flags);
-#endif
c = get_cpu_slab(s, raw_smp_processor_id());
stat(c, FREE_SLOWPATH);
slab_lock(page);
@@ -1734,9 +1682,6 @@ checks_ok:
out_unlock:
slab_unlock(page);
-#ifdef SLUB_FASTPATH
- local_irq_restore(flags);
-#endif
return;
slab_empty:
@@ -1749,9 +1694,6 @@ slab_empty:
}
slab_unlock(page);
stat(c, FREE_SLAB);
-#ifdef SLUB_FASTPATH
- local_irq_restore(flags);
-#endif
discard_slab(s, page);
return;
@@ -1777,34 +1719,6 @@ static __always_inline void slab_free(st
{
void **object = (void *)x;
struct kmem_cache_cpu *c;
-
-#ifdef SLUB_FASTPATH
- void **freelist;
-
- c = get_cpu_slab(s, raw_smp_processor_id());
- debug_check_no_locks_freed(object, s->objsize);
- do {
- freelist = c->freelist;
- barrier();
- /*
- * If the compiler would reorder the retrieval of c->page to
- * come before c->freelist then an interrupt could
- * change the cpu slab before we retrieve c->freelist. We
- * could be matching on a page no longer active and put the
- * object onto the freelist of the wrong slab.
- *
- * On the other hand: If we already have the freelist pointer
- * then any change of cpu_slab will cause the cmpxchg to fail
- * since the freelist pointers are unique per slab.
- */
- if (unlikely(page != c->page || c->node < 0)) {
- __slab_free(s, page, x, addr, c->offset);
- break;
- }
- object[c->offset] = freelist;
- stat(c, FREE_FASTPATH);
- } while (cmpxchg_local(&c->freelist, freelist, object) != freelist);
-#else
unsigned long flags;
local_irq_save(flags);
@@ -1818,7 +1732,6 @@ static __always_inline void slab_free(st
__slab_free(s, page, x, addr, c->offset);
local_irq_restore(flags);
-#endif
}
void kmem_cache_free(struct kmem_cache *s, void *x)
next prev parent reply other threads:[~2008-02-19 14:57 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-15 21:23 Linus Torvalds
2008-02-16 2:08 ` Rafael J. Wysocki
2008-02-16 5:44 ` [BUG] Linux 2.6.25-rc2 - Kernel Ooops while running dbench Kamalesh Babulal
2008-02-18 12:59 ` Andrew Morton
2008-02-18 14:25 ` Jeff Garzik
2008-02-18 16:11 ` Frans Pop
2008-03-03 11:51 ` Pekka Enberg
2008-03-04 4:03 ` Kamalesh Babulal
2008-02-16 6:10 ` [BUG] Linux 2.6.25-rc2 - Regression from 2.6.24-rc1-git1 softlockup while bootup on powerpc Kamalesh Babulal
2008-02-17 19:29 ` Jens Axboe
2008-02-19 8:04 ` KAMEZAWA Hiroyuki
2008-02-19 8:36 ` Jens Axboe
2008-02-19 8:47 ` KAMEZAWA Hiroyuki
2008-02-19 8:58 ` Jens Axboe
2008-02-19 9:07 ` KAMEZAWA Hiroyuki
2008-02-19 9:09 ` Jens Axboe
2008-02-19 9:02 ` KAMEZAWA Hiroyuki
2008-02-19 9:01 ` Jens Axboe
2008-02-19 13:19 ` Kamalesh Babulal
2008-02-22 7:24 ` Andrew Morton
2008-02-22 7:40 ` Jens Axboe
2008-02-17 20:08 ` Rafael J. Wysocki
2008-02-16 16:52 ` Linux 2.6.25-rc2 Jan Engelhardt
2008-02-16 19:14 ` Linux 2.6.25-rc2 regression: LVM cannot find volume group Tilman Schmidt
2008-02-16 20:12 ` Alan Cox
2008-02-16 22:37 ` Jiri Slaby
2008-02-18 0:57 ` Tilman Schmidt
2008-02-18 1:22 ` Jeff Chua
2008-02-18 10:35 ` Tilman Schmidt
2008-02-19 1:53 ` Alasdair G Kergon
2008-02-19 8:56 ` Tilman Schmidt
2008-02-16 21:38 ` Linux 2.6.25-rc2 Torsten Kaiser
2008-02-17 20:25 ` Rafael J. Wysocki
2008-02-17 21:32 ` Torsten Kaiser
2008-02-18 23:54 ` Linus Torvalds
2008-02-19 6:44 ` Torsten Kaiser
2008-02-19 6:11 ` Ingo Molnar
2008-02-19 6:54 ` Torsten Kaiser
2008-02-19 7:21 ` Pekka Enberg
2008-02-19 10:27 ` Ingo Molnar
2008-02-19 10:45 ` Pekka Enberg
2008-02-19 13:02 ` Mathieu Desnoyers
2008-02-19 14:00 ` Ingo Molnar
2008-02-19 14:02 ` Mathieu Desnoyers
2008-02-19 14:21 ` Pekka Enberg
2008-02-19 14:38 ` Pekka Enberg
2008-02-19 14:55 ` Ingo Molnar
2008-02-19 14:57 ` Ingo Molnar [this message]
2008-02-19 15:54 ` Pekka Enberg
2008-02-19 15:52 ` Pekka Enberg
2008-02-20 0:36 ` Zhang, Yanmin
2008-02-20 2:08 ` Zhang, Yanmin
2008-02-20 6:53 ` Zhang, Yanmin
2008-02-20 7:10 ` Pekka Enberg
2008-02-19 16:20 ` Linus Torvalds
2008-02-19 16:45 ` Ingo Molnar
2008-02-19 16:48 ` Ingo Molnar
2008-02-19 19:27 ` Torsten Kaiser
2008-02-19 20:08 ` Mathieu Desnoyers
2008-02-27 23:32 ` Christoph Lameter
2008-02-28 1:57 ` Andrew Morton
2008-02-28 2:43 ` Christoph Lameter
2008-02-28 8:14 ` Ingo Molnar
2008-02-28 11:15 ` Alan Cox
2008-02-28 11:13 ` Jiri Kosina
2008-02-19 16:27 ` Eric Dumazet
2008-02-19 16:38 ` Linus Torvalds
2008-02-19 20:03 ` Mathieu Desnoyers
2008-02-27 23:34 ` Christoph Lameter
2008-02-28 5:55 ` [PATCH] Implement slub fastpath in terms of freebase and freeoffset Mathieu Desnoyers
2008-02-28 19:08 ` Christoph Lameter
2008-02-28 23:25 ` Mathieu Desnoyers
2008-02-29 0:57 ` Christoph Lameter
2008-02-29 1:56 ` Mathieu Desnoyers
2008-02-29 2:12 ` Christoph Lameter
2008-02-29 3:32 ` Mathieu Desnoyers
2008-02-29 5:11 ` Christoph Lameter
2008-02-29 13:03 ` Mathieu Desnoyers
2008-02-29 19:57 ` Christoph Lameter
2008-02-29 13:28 ` [PATCH] Slub Freeoffset check overflow Mathieu Desnoyers
2008-03-04 6:17 ` [PATCH] Slub Freeoffset check overflow (updated) Mathieu Desnoyers
2008-03-04 7:15 ` Christoph Lameter
2008-02-27 23:32 ` Linux 2.6.25-rc2 Christoph Lameter
2008-02-19 18:39 ` Torsten Kaiser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080219145719.GA22898@elte.hu \
--to=mingo@elte.hu \
--cc=clameter@sgi.com \
--cc=just.for.lkml@googlemail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@polymtl.ca \
--cc=penberg@cs.helsinki.fi \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®