[patch v4 15/17] MMC: S3C24XX: Update error debugging.

[Ben Dooks <ben-linux@fluff.org>]

[-- Attachment #1: simtec/s3c24xx-sdmmc-debug-errors.patch --]
[-- Type: text/plain, Size: 2680 bytes --]

Add better debugging to show where errors are being
generated, as some error codes can come from several
different code paths.

Also fix the error return path from s3cmci_setup_data()
to return the error it returned to the request.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Index: linux-2.6.26-rc8-next20080627/drivers/mmc/host/s3cmci.c
===================================================================
--- linux-2.6.26-rc8-next20080627.orig/drivers/mmc/host/s3cmci.c	2008-06-30 16:08:38.000000000 +0100
+++ linux-2.6.26-rc8-next20080627/drivers/mmc/host/s3cmci.c	2008-06-30 16:08:52.000000000 +0100
@@ -451,6 +451,7 @@ static irqreturn_t s3cmci_irq(int irq, v
 	}
 
 	if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
+		dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n");
 		cmd->error = -ETIMEDOUT;
 		host->status = "error: command timeout";
 		goto fail_transfer;
@@ -506,12 +507,14 @@ static irqreturn_t s3cmci_irq(int irq, v
 	/* Check for FIFO failure */
 	if (host->is2440) {
 		if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) {
+			dbg(host, dbg_err, "FIFO failure\n");
 			host->mrq->data->error = -EILSEQ;
 			host->status = "error: 2440 fifo failure";
 			goto fail_transfer;
 		}
 	} else {
 		if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) {
+			dbg(host, dbg_err, "FIFO failure\n");
 			cmd->data->error = -EILSEQ;
 			host->status = "error:  fifo failure";
 			goto fail_transfer;
@@ -519,18 +522,21 @@ static irqreturn_t s3cmci_irq(int irq, v
 	}
 
 	if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) {
+		dbg(host, dbg_err, "bad data crc (outgoing)\n");
 		cmd->data->error = -EILSEQ;
 		host->status = "error: bad data crc (outgoing)";
 		goto fail_transfer;
 	}
 
 	if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) {
+		dbg(host, dbg_err, "bad data crc (incoming)\n");
 		cmd->data->error = -EILSEQ;
 		host->status = "error: bad data crc (incoming)";
 		goto fail_transfer;
 	}
 
 	if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) {
+		dbg(host, dbg_err, "data timeout\n");
 		cmd->data->error = -ETIMEDOUT;
 		host->status = "error: data timeout";
 		goto fail_transfer;
@@ -957,8 +963,9 @@ static void s3cmci_send_request(struct m
 		host->dcnt++;
 
 		if (res) {
-			cmd->error = -EINVAL;
-			cmd->data->error = -EINVAL;
+			dbg(host, dbg_err, "setup data error %d\n", res);
+			cmd->error = res;
+			cmd->data->error = res;
 
 			mmc_request_done(mmc, mrq);
 			return;
@@ -970,6 +977,7 @@ static void s3cmci_send_request(struct m
 			res = s3cmci_prepare_pio(host, cmd->data);
 
 		if (res) {
+			dbg(host, dbg_err, "data prepare error %d\n", res);
 			cmd->error = res;
 			cmd->data->error = res;
 

-- 
Ben (ben@fluff.org, http://www.fluff.org/)

  'a smiley only costs 4 bytes'