mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Suresh Siddha <suresh.b.siddha@intel.com>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH] x86: let 32bit use apic_ops too - fix
Date: Sun, 13 Jul 2008 22:19:35 -0700	[thread overview]
Message-ID: <200807132219.35814.yhlu.kernel@gmail.com> (raw)
In-Reply-To: <200807111841.55403.yhlu.kernel@gmail.com>


fix for pv.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

---
 arch/x86/kernel/paravirt.c |    5 ----
 arch/x86/kernel/vmi_32.c   |   51 ++++++++++++++++++++++++++++++++++++++++++---
 arch/x86/xen/enlighten.c   |   19 +++++++---------
 include/asm-x86/paravirt.h |   29 -------------------------
 4 files changed, 57 insertions(+), 47 deletions(-)

Index: linux-2.6/arch/x86/kernel/paravirt.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/paravirt.c
+++ linux-2.6/arch/x86/kernel/paravirt.c
@@ -373,11 +373,6 @@ struct pv_cpu_ops pv_cpu_ops = {
 
 struct pv_apic_ops pv_apic_ops = {
 #ifdef CONFIG_X86_LOCAL_APIC
-#ifndef CONFIG_X86_64
-	.apic_write = native_apic_mem_write,
-	.apic_write_atomic = native_apic_mem_write_atomic,
-	.apic_read = native_apic_mem_read,
-#endif
 	.setup_boot_clock = setup_boot_APIC_clock,
 	.setup_secondary_clock = setup_secondary_APIC_clock,
 	.startup_ipi_hook = paravirt_nop,
Index: linux-2.6/arch/x86/kernel/vmi_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/vmi_32.c
+++ linux-2.6/arch/x86/kernel/vmi_32.c
@@ -676,6 +676,50 @@ static inline int __init probe_vmi_rom(v
 	return 0;
 }
 
+#ifdef CONFIG_X86_LOCAL_APIC
+static u32 vmi_apic_read(u32 reg)
+{
+	return 0;
+}
+
+static void vmi_apic_write(u32 reg, u32 val)
+{
+	/* Warn to see if there's any stray references */
+	WARN_ON(1);
+}
+
+static u64 vmi_apic_icr_read(void)
+{
+	return 0;
+}
+
+static void vmi_apic_icr_write(u32 low, u32 id)
+{
+	/* Warn to see if there's any stray references */
+	WARN_ON(1);
+}
+
+static void vmi_apic_wait_icr_idle(void)
+{
+	return;
+}
+
+static u32 vmi_safe_apic_wait_icr_idle(void)
+{
+	return 0;
+}
+
+static struct apic_ops vmi_basic_apic_ops = {
+        .read = vmi_apic_read,
+        .write = vmi_apic_write,
+        .write_atomic = vmi_apic_write,
+        .icr_read = vmi_apic_icr_read,
+        .icr_write = vmi_apic_icr_write,
+        .wait_icr_idle = vmi_apic_wait_icr_idle,
+        .safe_wait_icr_idle = vmi_safe_apic_wait_icr_idle,
+};
+#endif
+
 /*
  * VMI setup common to all processors
  */
@@ -904,9 +948,10 @@ static inline int __init activate_vmi(vo
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
-	para_fill(pv_apic_ops.apic_read, APICRead);
-	para_fill(pv_apic_ops.apic_write, APICWrite);
-	para_fill(pv_apic_ops.apic_write_atomic, APICWrite);
+	para_fill(vmi_basic_apic_ops.read, APICRead);
+	para_fill(vmi_basic_apic_ops.write, APICWrite);
+	para_fill(vmi_basic_apic_ops.write_atomic, APICWrite);
+	apic_ops = &vmi_basic_apic_ops;
 #endif
 
 	/*
Index: linux-2.6/arch/x86/xen/enlighten.c
===================================================================
--- linux-2.6.orig/arch/x86/xen/enlighten.c
+++ linux-2.6/arch/x86/xen/enlighten.c
@@ -587,7 +587,6 @@ static void xen_apic_write(u32 reg, u32
 	WARN_ON(1);
 }
 
-#ifdef CONFIG_X86_64
 static u64 xen_apic_icr_read(void)
 {
 	return 0;
@@ -604,6 +603,11 @@ static void xen_apic_wait_icr_idle(void)
         return;
 }
 
+static u32 xen_safe_apic_wait_icr_idle(void)
+{
+        return 0;
+}
+
 static struct apic_ops xen_basic_apic_ops = {
 	.read = xen_apic_read,
 	.write = xen_apic_write,
@@ -611,9 +615,8 @@ static struct apic_ops xen_basic_apic_op
 	.icr_read = xen_apic_icr_read,
 	.icr_write = xen_apic_icr_write,
 	.wait_icr_idle = xen_apic_wait_icr_idle,
-	.safe_wait_icr_idle = xen_apic_wait_icr_idle,
+	.safe_wait_icr_idle = xen_safe_apic_wait_icr_idle,
 };
-#endif
 
 #endif
 
@@ -1298,11 +1301,6 @@ static const struct pv_irq_ops xen_irq_o
 
 static const struct pv_apic_ops xen_apic_ops __initdata = {
 #ifdef CONFIG_X86_LOCAL_APIC
-#ifndef CONFIG_X86_64
-	.apic_write = xen_apic_write,
-	.apic_write_atomic = xen_apic_write,
-	.apic_read = xen_apic_read,
-#endif
 	.setup_boot_clock = paravirt_nop,
 	.setup_secondary_clock = paravirt_nop,
 	.startup_ipi_hook = paravirt_nop,
@@ -1704,9 +1702,10 @@ asmlinkage void __init xen_start_kernel(
 	pv_irq_ops = xen_irq_ops;
 	pv_apic_ops = xen_apic_ops;
 	pv_mmu_ops = xen_mmu_ops;
-#ifdef CONFIG_X86_64
+
+#ifdef CONFIG_X86_LOCAL_APIC
 	/*
-	 * for 64bit, set up the basic apic ops aswell.
+	 * set up the basic apic ops.
 	 */
 	apic_ops = &xen_basic_apic_ops;
 #endif
Index: linux-2.6/include/asm-x86/paravirt.h
===================================================================
--- linux-2.6.orig/include/asm-x86/paravirt.h
+++ linux-2.6/include/asm-x86/paravirt.h
@@ -200,15 +200,6 @@ struct pv_irq_ops {
 
 struct pv_apic_ops {
 #ifdef CONFIG_X86_LOCAL_APIC
-#ifndef CONFIG_X86_64
-	/*
-	 * Direct APIC operations, principally for VMI.  Ideally
-	 * these shouldn't be in this interface.
-	 */
-	void (*apic_write)(u32 reg, u32 v);
-	void (*apic_write_atomic)(u32 reg, u32 v);
-	u32 (*apic_read)(u32 reg);
-#endif
 	void (*setup_boot_clock)(void);
 	void (*setup_secondary_clock)(void);
 
@@ -901,26 +892,6 @@ static inline void slow_down_io(void)
 }
 
 #ifdef CONFIG_X86_LOCAL_APIC
-/*
- * Basic functions accessing APICs.
- */
-#ifndef CONFIG_X86_64
-static inline void apic_write(u32 reg, u32 v)
-{
-	PVOP_VCALL2(pv_apic_ops.apic_write, reg, v);
-}
-
-static inline void apic_write_atomic(u32 reg, u32 v)
-{
-	PVOP_VCALL2(pv_apic_ops.apic_write_atomic, reg, v);
-}
-
-static inline u32 apic_read(u32 reg)
-{
-	return PVOP_CALL1(unsigned long, pv_apic_ops.apic_read, reg);
-}
-#endif
-
 static inline void setup_boot_clock(void)
 {
 	PVOP_VCALL0(pv_apic_ops.setup_boot_clock);

  parent reply	other threads:[~2008-07-14  5:20 UTC|newest]

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-07-08  8:41 [PATCH] x86: introduce page_size_mask for 64bit Yinghai Lu
2008-07-08  8:43 ` [PATCH] x86: not overmap than end in init_memory_mapping - 64bit Yinghai Lu
2008-07-09  7:38   ` Ingo Molnar
2008-07-09  8:34     ` Ingo Molnar
2008-07-09  8:37       ` Yinghai Lu
2008-07-09  8:46         ` Ingo Molnar
2008-07-09  8:58           ` Yinghai Lu
2008-07-09 10:01           ` Yinghai Lu
2008-07-09 10:30             ` Ingo Molnar
2008-07-09  8:45       ` Ingo Molnar
2008-07-10  3:15   ` [PATCh] x86: overmapped fix when 4K pages on tail " Yinghai Lu
2008-07-10  3:16     ` [PATCH] x86: merge __acpi_map_table Yinghai Lu
2008-07-10  3:17       ` [PATCH] x86: make e820_end return end_of_ram again for 64bit Yinghai Lu
2008-07-10  7:00         ` Ingo Molnar
2008-07-10 11:17         ` [PATCH] x86: e820 remove the range instead of update it to reserved Yinghai Lu
2008-07-11  8:20           ` Ingo Molnar
2008-07-11  3:36         ` [PATCH] x86: save slit Yinghai Lu
2008-07-11  8:22           ` Ingo Molnar
2008-07-11  3:38         ` [PATCH] x86: introduce max_low_pfn_mapped for 64bit Yinghai Lu
2008-07-11  8:26           ` Ingo Molnar
2008-07-11  8:39             ` Yinghai Lu
2008-07-11  8:51               ` Ingo Molnar
2008-07-12  1:41           ` [PATCH] x86: let 32bit use apic_ops too Yinghai Lu
2008-07-12  1:43             ` [PATCH] x86: mach_apicdef.h need to include before smp.h Yinghai Lu
2008-07-12  1:44               ` [PATCH] x86: make read_apic_id return final apicid Yinghai Lu
2008-07-12  8:01                 ` [PATCH] x86: make 64bit have get_apic_id Yinghai Lu
2008-07-13  6:28                   ` Ingo Molnar
2008-07-13  6:59                     ` Ingo Molnar
2008-07-13  7:05                       ` Yinghai Lu
2008-07-13  9:23                         ` Ingo Molnar
2008-07-13  9:28                           ` Ingo Molnar
2008-07-13 16:15                             ` Suresh Siddha
2008-07-13  1:19                 ` [PATCH] x86: make read_apic_id return final apicid Suresh Siddha
2008-07-13  1:08             ` [PATCH] x86: let 32bit use apic_ops too Suresh Siddha
2008-07-13  2:04               ` Yinghai Lu
2008-07-13 16:28                 ` Suresh Siddha
2008-07-13 16:51                   ` Maciej W. Rozycki
2008-07-13 17:16                     ` Cyrill Gorcunov
2008-07-13 23:46                       ` Maciej W. Rozycki
2008-07-14 16:48                         ` Cyrill Gorcunov
2008-07-14 17:20                           ` Maciej W. Rozycki
2008-07-14 18:09                             ` Cyrill Gorcunov
2008-07-14 18:24                               ` Maciej W. Rozycki
2008-07-14 18:32                                 ` Cyrill Gorcunov
2008-07-13  1:43             ` Maciej W. Rozycki
2008-07-13  1:45               ` Yinghai Lu
2008-07-13  1:54                 ` Maciej W. Rozycki
2008-07-13 16:43                   ` Suresh Siddha
2008-07-13 17:05                     ` Maciej W. Rozycki
2008-07-14  5:19             ` Yinghai Lu [this message]
2008-07-14  7:12               ` [PATCH] x86: let 32bit use apic_ops too - fix Ingo Molnar
2008-07-14 16:49                 ` Suresh Siddha
2008-07-14 17:00                   ` Yinghai Lu
2008-07-14 18:03                     ` Suresh Siddha
2008-07-18 17:06                   ` Ingo Molnar
2008-07-15 17:33               ` Suresh Siddha
2008-07-15 18:10                 ` Yinghai Lu
2008-07-15 18:27                   ` Suresh Siddha
2008-07-18 17:07                 ` Ingo Molnar
2008-07-12 21:30           ` [PATCH] x86: max_low_pfn_mapped fix #1 Yinghai Lu
2008-07-13  9:45             ` Ingo Molnar
2008-07-12 21:31           ` [PATCH] x86: max_low_pfn_mapped fix #2 Yinghai Lu
2008-07-12 21:32           ` [PATCH] x86: max_low_pfn_mapped fix #3 Yinghai Lu
2008-07-13 21:29             ` [PATCH] x86: max_low_pfn_mapped fix #4 Yinghai Lu
2008-07-13 21:30             ` [PATCH] x86: get x86_phys_bits early Yinghai Lu
2008-07-13 21:32             ` [PATCH] x86: make 64bit hpet_set_mapping to use ioremap too Yinghai Lu
2008-07-13 21:50               ` [PATCH] x86: make 64bit hpet_set_mapping to use ioremap too v2 Yinghai Lu
2008-07-10  6:54       ` [PATCH] x86: merge __acpi_map_table Ingo Molnar
2008-07-10  6:53     ` [PATCh] x86: overmapped fix when 4K pages on tail - 64bit Ingo Molnar
2008-07-10  6:57       ` Yinghai Lu
2008-07-10  7:20         ` Ingo Molnar
2008-07-10  7:32           ` Yinghai Lu
2008-07-10 14:16     ` Arjan van de Ven
2008-07-13 14:57       ` Andi Kleen
2008-07-13 15:33         ` Arjan van de Ven
2008-07-13 18:25           ` Andi Kleen
2008-07-13 18:17         ` Yinghai Lu
2008-07-13 18:48           ` Andi Kleen
2008-07-13 19:00             ` Yinghai Lu
2008-07-13 20:32             ` Ingo Molnar
2008-07-13 20:51               ` Andi Kleen
2008-07-14  0:04                 ` H. Peter Anvin
2008-07-14  6:39                   ` Andi Kleen
2008-07-09  7:38 ` [PATCH] x86: introduce page_size_mask for 64bit Ingo Molnar
2008-07-15 18:38 Patch from LKML Zachary Amsden
2008-07-15 18:51 ` [PATCH] x86: let 32bit use apic_ops too - fix Suresh Siddha
2008-07-15 19:04   ` Zachary Amsden
2008-07-15 19:10     ` Yinghai Lu
2008-07-15 19:19       ` Zachary Amsden
2008-07-15 19:22   ` Yinghai Lu
2008-07-15 19:24     ` Zachary Amsden

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200807132219.35814.yhlu.kernel@gmail.com \
    --to=yhlu.kernel@gmail.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=suresh.b.siddha@intel.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome