From: Arnd Bergmann <arnd@arndb.de>
To: linux-arch@vger.kernel.org, x86@kernel.org,
Richard Henderson <rth@twiddle.net>,
Ralf Baechle <ralf@linux-mips.org>, Takashi Iwai <tiwai@suse.de>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Ingo Molnar <mingo@elte.hu>,
Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: [PATCH] move PIT_TICK_RATE to linux/timex.h
Date: Mon, 11 May 2009 22:55:36 +0000 [thread overview]
Message-ID: <200905112255.37215.arnd@arndb.de> (raw)
In-Reply-To: <20090511222702.352192505@arndb.de>
PIT_TICK_RATE is currently defined in four architectures,
but in three different places. While linux/timex.h is not
the perfect place for it, it is still a reasonable replacement
for those drivers that traditionally use asm/timex.h to
get CLOCK_TICK_RATE and expect it to be the PIT frequency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/alpha/include/asm/8253pit.h | 7 -------
arch/alpha/kernel/sys_ruffian.c | 1 +
arch/mips/include/asm/i8253.h | 2 --
arch/powerpc/include/asm/8253pit.h | 7 -------
arch/x86/include/asm/timex.h | 4 +---
arch/x86/kernel/i8253.c | 1 +
arch/x86/kernel/tsc.c | 1 +
drivers/clocksource/acpi_pm.c | 1 +
drivers/input/joystick/analog.c | 2 +-
drivers/input/misc/pcspkr.c | 1 +
include/linux/timex.h | 3 +++
sound/drivers/pcsp/pcsp.h | 1 +
sound/oss/pas2_pcm.c | 2 +-
13 files changed, 12 insertions(+), 21 deletions(-)
diff --git a/arch/alpha/include/asm/8253pit.h
b/arch/alpha/include/asm/8253pit.h
index fef5c14..a71c9c1 100644
--- a/arch/alpha/include/asm/8253pit.h
+++ b/arch/alpha/include/asm/8253pit.h
@@ -1,10 +1,3 @@
/*
* 8253/8254 Programmable Interval Timer
*/
-
-#ifndef _8253PIT_H
-#define _8253PIT_H
-
-#define PIT_TICK_RATE 1193180UL
-
-#endif
diff --git a/arch/alpha/kernel/sys_ruffian.c b/arch/alpha/kernel/sys_ruffian.c
index f15a329..d9f9cfe 100644
--- a/arch/alpha/kernel/sys_ruffian.c
+++ b/arch/alpha/kernel/sys_ruffian.c
@@ -14,6 +14,7 @@
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/ioport.h>
+#include <linux/timex.h>
#include <linux/init.h>
#include <asm/ptrace.h>
diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h
index 5dabc87..032ca73 100644
--- a/arch/mips/include/asm/i8253.h
+++ b/arch/mips/include/asm/i8253.h
@@ -12,8 +12,6 @@
#define PIT_CH0 0x40
#define PIT_CH2 0x42
-#define PIT_TICK_RATE 1193182UL
-
extern spinlock_t i8253_lock;
extern void setup_pit_timer(void);
diff --git a/arch/powerpc/include/asm/8253pit.h
b/arch/powerpc/include/asm/8253pit.h
index b70d6e5..a71c9c1 100644
--- a/arch/powerpc/include/asm/8253pit.h
+++ b/arch/powerpc/include/asm/8253pit.h
@@ -1,10 +1,3 @@
-#ifndef _ASM_POWERPC_8253PIT_H
-#define _ASM_POWERPC_8253PIT_H
-
/*
* 8253/8254 Programmable Interval Timer
*/
-
-#define PIT_TICK_RATE 1193182UL
-
-#endif /* _ASM_POWERPC_8253PIT_H */
diff --git a/arch/x86/include/asm/timex.h b/arch/x86/include/asm/timex.h
index b5c9d45..1375cfc 100644
--- a/arch/x86/include/asm/timex.h
+++ b/arch/x86/include/asm/timex.h
@@ -4,9 +4,7 @@
#include <asm/processor.h>
#include <asm/tsc.h>
-/* The PIT ticks at this frequency (in HZ): */
-#define PIT_TICK_RATE 1193182
-
+/* Assume we use the PIT time source for the clock tick */
#define CLOCK_TICK_RATE PIT_TICK_RATE
#define ARCH_HAS_READ_CURRENT_TIMER
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 5b0ef4e..3e5ec80 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -7,6 +7,7 @@
#include <linux/spinlock.h>
#include <linux/jiffies.h>
#include <linux/module.h>
+#include <linux/timex.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index d1cb3e5..5c627ff 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -9,6 +9,7 @@
#include <linux/delay.h>
#include <linux/clocksource.h>
#include <linux/percpu.h>
+#include <linux/timex.h>
#include <asm/hpet.h>
#include <asm/timer.h>
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 8e4c896..f6d351c 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -18,6 +18,7 @@
#include <linux/acpi_pmtmr.h>
#include <linux/clocksource.h>
+#include <linux/timex.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/pci.h>
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index 3f99867..5776f72 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -35,7 +35,7 @@
#include <linux/input.h>
#include <linux/gameport.h>
#include <linux/jiffies.h>
-#include <asm/timex.h>
+#include <linux/timex.h>
#define DRIVER_DESC "Analog joystick and gamepad driver"
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index d6a30ce..6d67af5 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/input.h>
#include <linux/platform_device.h>
+#include <linux/timex.h>
#include <asm/io.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
diff --git a/include/linux/timex.h b/include/linux/timex.h
index aa3475f..66cbf74 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -260,6 +260,9 @@ extern int do_adjtimex(struct timex *);
int read_current_timer(unsigned long *timer_val);
+/* The clock frequency of the i8253/i8254 PIT */
+#define PIT_TICK_RATE 1193182ul
+
#endif /* KERNEL */
#endif /* LINUX_TIMEX_H */
diff --git a/sound/drivers/pcsp/pcsp.h b/sound/drivers/pcsp/pcsp.h
index cdef266..174dd2f 100644
--- a/sound/drivers/pcsp/pcsp.h
+++ b/sound/drivers/pcsp/pcsp.h
@@ -10,6 +10,7 @@
#define __PCSP_H__
#include <linux/hrtimer.h>
+#include <linux/timex.h>
#if defined(CONFIG_MIPS) || defined(CONFIG_X86)
/* Use the global PIT lock ! */
#include <asm/i8253.h>
diff --git a/sound/oss/pas2_pcm.c b/sound/oss/pas2_pcm.c
index 0891e3b..6f13ab4 100644
--- a/sound/oss/pas2_pcm.c
+++ b/sound/oss/pas2_pcm.c
@@ -17,7 +17,7 @@
#include <linux/init.h>
#include <linux/spinlock.h>
-#include <asm/timex.h>
+#include <linux/timex.h>
#include "sound_config.h"
#include "pas2.h"
--
1.6.0.4
--
next prev parent reply other threads:[~2009-05-11 22:56 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20090511222702.352192505@arndb.de>
2009-05-11 22:37 ` [PATCH] mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF Arnd Bergmann
2009-05-13 12:25 ` Anatolij Gustschin
2009-05-11 22:38 ` [PATCH] ata: libata depends on HAS_DMA Arnd Bergmann
2009-05-12 0:58 ` Jeff Garzik
2009-05-12 12:40 ` Arnd Bergmann
2009-05-12 13:05 ` Arnd Bergmann
2009-05-12 8:06 ` Alan Cox
2009-05-12 9:23 ` Arnd Bergmann
2009-05-13 3:30 ` Brad Boyer
2009-05-13 4:12 ` Michael Schmitz
2009-05-13 4:34 ` Brad Boyer
2009-05-13 8:51 ` Alan Cox
2009-05-13 8:55 ` Geert Uytterhoeven
2009-05-13 23:57 ` Robert Hancock
2009-05-14 0:18 ` FUJITA Tomonori
2009-05-15 5:31 ` Tejun Heo
2009-05-15 11:16 ` Arnd Bergmann
2009-05-15 11:21 ` Tejun Heo
2009-05-15 11:55 ` Arnd Bergmann
2009-05-17 9:00 ` Robert Hancock
2009-05-17 19:38 ` Arnd Bergmann
2009-05-17 20:05 ` Jeff Garzik
2009-05-17 22:45 ` [PATCH] asm-generic: add a dma-mapping.h file Arnd Bergmann
2009-05-18 6:03 ` Geert Uytterhoeven
2009-05-18 8:28 ` Arnd Bergmann
2009-05-18 10:45 ` FUJITA Tomonori
2009-05-18 14:45 ` Arnd Bergmann
2009-05-18 22:44 ` FUJITA Tomonori
2009-05-19 16:22 ` Arnd Bergmann
2009-05-19 17:01 ` Grant Grundler
2009-05-19 17:40 ` Arnd Bergmann
2009-05-19 18:08 ` Grant Grundler
2009-05-22 12:12 ` FUJITA Tomonori
2009-05-22 14:07 ` Arnd Bergmann
2009-05-22 14:38 ` FUJITA Tomonori
2009-05-22 15:05 ` Arnd Bergmann
2009-05-26 4:36 ` FUJITA Tomonori
2009-05-26 12:35 ` Arnd Bergmann
2009-05-27 3:58 ` FUJITA Tomonori
2009-05-18 22:54 ` Jeff Garzik
2009-05-18 23:22 ` FUJITA Tomonori
2009-05-18 10:45 ` [PATCH] ata: libata depends on HAS_DMA FUJITA Tomonori
2009-05-13 10:39 ` Arnd Bergmann
2009-05-11 22:40 ` [PATCH] scsi: libsas " Arnd Bergmann
2009-05-11 22:50 ` James Bottomley
2009-05-11 22:59 ` James Bottomley
2009-05-11 23:16 ` Arnd Bergmann
2009-05-11 22:43 ` [PATCH] arm: rename CLOCK_TICK_RATE to ARM_TICK_RATE Arnd Bergmann
2009-05-11 23:11 ` [PATCH v2] " Arnd Bergmann
2009-05-13 17:11 ` [PATCH] " Arnd Bergmann
2009-05-11 22:50 ` [PATCH] x86: use PIT_TICK_RATE consistently Arnd Bergmann
2009-05-11 23:05 ` Arnd Bergmann
2009-05-11 22:55 ` Arnd Bergmann [this message]
2009-05-12 0:01 ` [PATCH] move PIT_TICK_RATE to linux/timex.h Andrew Morton
2009-05-12 0:36 ` Arnd Bergmann
2009-05-11 22:57 ` [PATCH] mips: use PIT_TICK_RATE in i8253 Arnd Bergmann
2009-05-11 22:58 ` [PATCH] input: use PIT_TICK_RATE in vt beep ioctl Arnd Bergmann
2009-05-12 9:31 ` Alan Cox
2009-05-11 22:59 ` [PATCH] x86: fix ktermios-termio conversion Arnd Bergmann
2009-05-11 23:19 ` [PATCH v2] " Arnd Bergmann
2009-05-12 7:55 ` Ingo Molnar
2009-05-12 9:04 ` Arnd Bergmann
2009-05-12 9:10 ` Ingo Molnar
2009-05-12 9:21 ` Alan Cox
2009-05-12 9:26 ` Ingo Molnar
2009-05-12 10:05 ` Alan Cox
2009-05-12 10:15 ` Ingo Molnar
2009-05-12 11:33 ` [PATCH v3] " Arnd Bergmann
2009-05-12 11:42 ` [PATCH v2] " Arnd Bergmann
2009-05-12 9:17 ` Alan Cox
2009-05-11 23:02 ` [PATCH] ipc: use __ARCH_WANT_IPC_PARSE_VERSION in ipc/util.h Arnd Bergmann
2009-05-12 0:19 ` Serge E. Hallyn
2009-05-11 23:03 ` [PATCH] syscalls.h add the missing sys_pipe2 declaration Arnd Bergmann
2009-05-11 23:08 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200905112255.37215.arnd@arndb.de \
--to=arnd@arndb.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=ralf@linux-mips.org \
--cc=rth@twiddle.net \
--cc=tiwai@suse.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome