* pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] @ 2009-06-24 17:27 Justin Mattock 2009-06-24 19:30 ` Rafael J. Wysocki 2009-06-24 19:32 ` Jesse Barnes 0 siblings, 2 replies; 7+ messages in thread From: Justin Mattock @ 2009-06-24 17:27 UTC (permalink / raw) To: Linux Kernel Mailing List (just pulled the latest git) And am seeing this: [ 0.696001] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.696010] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.696069] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.696074] pci 0000:00:01.0: IO window: 0x3000-0x3fff [ 0.696081] pci 0000:00:01.0: MEM window: 0x50300000-0x503fffff [ 0.696087] pci 0000:00:01.0: PREFETCH window: 0x00000040000000-0x00000047ffffff [ 0.696096] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.696102] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.696111] pci 0000:00:1c.0: MEM window: 0x50200000-0x502fffff [ 0.696118] pci 0000:00:1c.0: PREFETCH window: 0x50500000-0x505fffff [ 0.696126] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.696130] pci 0000:00:1c.1: IO window: disabled [ 0.696138] pci 0000:00:1c.1: MEM window: 0x50100000-0x501fffff [ 0.696145] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.696152] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.696158] pci 0000:00:1c.2: IO window: 0x1000-0x1fff [ 0.696167] pci 0000:00:1c.2: MEM window: 0x4c100000-0x500fffff [ 0.696174] pci 0000:00:1c.2: PREFETCH window: 0x00000048000000-0x0000004bffffff [ 0.696186] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c [ 0.696190] pci 0000:00:1e.0: IO window: disabled [ 0.696198] pci 0000:00:1e.0: MEM window: 0x4c000000-0x4c0fffff [ 0.696205] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.696219] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.696225] pci 0000:00:01.0: setting latency timer to 64 [ 0.696235] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.696243] pci 0000:00:1c.0: setting latency timer to 64 [ 0.696254] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.696261] pci 0000:00:1c.1: setting latency timer to 64 [ 0.696273] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.696280] pci 0000:00:1c.2: setting latency timer to 64 [ 0.696437] pci 0000:00:1e.0: power state changed by ACPI to D0 [ 0.696446] pci 0000:00:1e.0: setting latency timer to 64 Is this good or bad? (BAR 6: no parent found for of device) -- Justin P. Mattock ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] 2009-06-24 17:27 pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] Justin Mattock @ 2009-06-24 19:30 ` Rafael J. Wysocki 2009-06-24 19:50 ` Matthew Wilcox 2009-06-24 19:32 ` Jesse Barnes 1 sibling, 1 reply; 7+ messages in thread From: Rafael J. Wysocki @ 2009-06-24 19:30 UTC (permalink / raw) To: Justin Mattock; +Cc: Linux Kernel Mailing List, Linux PCI, Jesse Barnes (Adding CC to linux-pci) On Wednesday 24 June 2009, Justin Mattock wrote: > (just pulled the latest git) > And am seeing this: Where pci 0000:01:00.0 and 0000:02:00.0 are what? > [ 0.696001] pci 0000:01:00.0: BAR 6: no parent found for of device > [0xfffe0000-0xffffffff] > [ 0.696010] pci 0000:02:00.0: BAR 6: no parent found for of device > [0xfffe0000-0xffffffff] > [ 0.696069] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > [ 0.696074] pci 0000:00:01.0: IO window: 0x3000-0x3fff > [ 0.696081] pci 0000:00:01.0: MEM window: 0x50300000-0x503fffff > [ 0.696087] pci 0000:00:01.0: PREFETCH window: > 0x00000040000000-0x00000047ffffff > [ 0.696096] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > [ 0.696102] pci 0000:00:1c.0: IO window: 0x2000-0x2fff > [ 0.696111] pci 0000:00:1c.0: MEM window: 0x50200000-0x502fffff > [ 0.696118] pci 0000:00:1c.0: PREFETCH window: 0x50500000-0x505fffff > [ 0.696126] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 > [ 0.696130] pci 0000:00:1c.1: IO window: disabled > [ 0.696138] pci 0000:00:1c.1: MEM window: 0x50100000-0x501fffff > [ 0.696145] pci 0000:00:1c.1: PREFETCH window: disabled > [ 0.696152] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 > [ 0.696158] pci 0000:00:1c.2: IO window: 0x1000-0x1fff > [ 0.696167] pci 0000:00:1c.2: MEM window: 0x4c100000-0x500fffff > [ 0.696174] pci 0000:00:1c.2: PREFETCH window: > 0x00000048000000-0x0000004bffffff > [ 0.696186] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c > [ 0.696190] pci 0000:00:1e.0: IO window: disabled > [ 0.696198] pci 0000:00:1e.0: MEM window: 0x4c000000-0x4c0fffff > [ 0.696205] pci 0000:00:1e.0: PREFETCH window: disabled > [ 0.696219] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.696225] pci 0000:00:01.0: setting latency timer to 64 > [ 0.696235] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 0.696243] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.696254] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > [ 0.696261] pci 0000:00:1c.1: setting latency timer to 64 > [ 0.696273] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > [ 0.696280] pci 0000:00:1c.2: setting latency timer to 64 > [ 0.696437] pci 0000:00:1e.0: power state changed by ACPI to D0 > [ 0.696446] pci 0000:00:1e.0: setting latency timer to 64 > > > Is this good or bad? > (BAR 6: no parent found for of device) There may be devices without parents, although the message itself seems to be broken. Please send the output of lspci. Best, Rafael ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] 2009-06-24 19:30 ` Rafael J. Wysocki @ 2009-06-24 19:50 ` Matthew Wilcox 2009-06-24 20:04 ` Jesse Barnes 0 siblings, 1 reply; 7+ messages in thread From: Matthew Wilcox @ 2009-06-24 19:50 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Justin Mattock, Linux Kernel Mailing List, Linux PCI, Jesse Barnes On Wed, Jun 24, 2009 at 09:30:07PM +0200, Rafael J. Wysocki wrote: > (Adding CC to linux-pci) Thanks Rafael. > On Wednesday 24 June 2009, Justin Mattock wrote: > > (just pulled the latest git) > > And am seeing this: > > Where pci 0000:01:00.0 and 0000:02:00.0 are what? > > > [ 0.696001] pci 0000:01:00.0: BAR 6: no parent found for of device > > [0xfffe0000-0xffffffff] So the message is coming from pci_claim_resource, and if you bother to bisect, you'll track it back to my commit a76117dfd687ec4be0a9a05214f3009cc5f73a42 . What's going on here, since this is BAR 6, is we have a ROM which has been mapped high, and then not unmapped. The BAR doesn't fit in the parent's window, so the code is rightly declining to allocate the BAR. Before my patch, we silently didn't allocate the BARs. Now we print a message. I wonder what to do ... we could silence this warning in pci_claim_resource (patch below). Or we could declare this to be a bug, and fix it by disabling the ROM BAR (by clearing bit 0). I'm agnostic ... anyone have any preferences? ---- Silence spurious warning about ROM BARs We shouldn't warn about not being able to allocate ROM BARs. They are often deliberately mapped outside the range of parent windows in order to disable them. Also fix the message to delete the spurious 'of'. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 1240351..d1b980c 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -109,8 +109,8 @@ int pci_claim_resource(struct pci_dev *dev, int resource) if (root != NULL) err = insert_resource(root, res); - if (err) { - dev_err(&dev->dev, "BAR %d: %s of %s %pR\n", + if (err && (resource != 6)) { + dev_err(&dev->dev, "BAR %d: %s %s %pR\n", resource, root ? "address space collision on" : "no parent found for", -- Matthew Wilcox Intel Open Source Technology Centre "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step." ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] 2009-06-24 19:50 ` Matthew Wilcox @ 2009-06-24 20:04 ` Jesse Barnes 2009-06-24 20:41 ` Justin Mattock 0 siblings, 1 reply; 7+ messages in thread From: Jesse Barnes @ 2009-06-24 20:04 UTC (permalink / raw) To: Matthew Wilcox Cc: Rafael J. Wysocki, Justin Mattock, Linux Kernel Mailing List, Linux PCI On Wed, 24 Jun 2009 13:50:30 -0600 Matthew Wilcox <matthew@wil.cx> wrote: > On Wed, Jun 24, 2009 at 09:30:07PM +0200, Rafael J. Wysocki wrote: > > (Adding CC to linux-pci) > > Thanks Rafael. > > > On Wednesday 24 June 2009, Justin Mattock wrote: > > > (just pulled the latest git) > > > And am seeing this: > > > > Where pci 0000:01:00.0 and 0000:02:00.0 are what? > > > > > [ 0.696001] pci 0000:01:00.0: BAR 6: no parent found for of > > > device [0xfffe0000-0xffffffff] > > So the message is coming from pci_claim_resource, and > if you bother to bisect, you'll track it back to my commit > a76117dfd687ec4be0a9a05214f3009cc5f73a42 . What's going on here, > since this is BAR 6, is we have a ROM which has been mapped high, and > then not unmapped. The BAR doesn't fit in the parent's window, so > the code is rightly declining to allocate the BAR. > > Before my patch, we silently didn't allocate the BARs. Now we print > a message. I wonder what to do ... we could silence this warning in > pci_claim_resource (patch below). Or we could declare this to be a > bug, and fix it by disabling the ROM BAR (by clearing bit 0). > > I'm agnostic ... anyone have any preferences? Well, given that sometimes the ROM is important, it seems like an error. Really we should be smarter about re-allocating things as necessary... -- Jesse Barnes, Intel Open Source Technology Center ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] 2009-06-24 20:04 ` Jesse Barnes @ 2009-06-24 20:41 ` Justin Mattock 0 siblings, 0 replies; 7+ messages in thread From: Justin Mattock @ 2009-06-24 20:41 UTC (permalink / raw) To: Jesse Barnes Cc: Matthew Wilcox, Rafael J. Wysocki, Linux Kernel Mailing List, Linux PCI On Wed, Jun 24, 2009 at 1:04 PM, Jesse Barnes<jbarnes@virtuousgeek.org> wrote: > On Wed, 24 Jun 2009 13:50:30 -0600 > Matthew Wilcox <matthew@wil.cx> wrote: > >> On Wed, Jun 24, 2009 at 09:30:07PM +0200, Rafael J. Wysocki wrote: >> > (Adding CC to linux-pci) >> >> Thanks Rafael. >> >> > On Wednesday 24 June 2009, Justin Mattock wrote: >> > > (just pulled the latest git) >> > > And am seeing this: >> > >> > Where pci 0000:01:00.0 and 0000:02:00.0 are what? >> > >> > > [ 0.696001] pci 0000:01:00.0: BAR 6: no parent found for of >> > > device [0xfffe0000-0xffffffff] >> >> So the message is coming from pci_claim_resource, and >> if you bother to bisect, you'll track it back to my commit >> a76117dfd687ec4be0a9a05214f3009cc5f73a42 . What's going on here, >> since this is BAR 6, is we have a ROM which has been mapped high, and >> then not unmapped. The BAR doesn't fit in the parent's window, so >> the code is rightly declining to allocate the BAR. >> >> Before my patch, we silently didn't allocate the BARs. Now we print >> a message. I wonder what to do ... we could silence this warning in >> pci_claim_resource (patch below). Or we could declare this to be a >> bug, and fix it by disabling the ROM BAR (by clearing bit 0). >> >> I'm agnostic ... anyone have any preferences? > > Well, given that sometimes the ROM is important, it seems like an > error. Really we should be smarter about re-allocating things as > necessary... > > -- > Jesse Barnes, Intel Open Source Technology Center > I guess the easiest would be to silence the problem, (but personally I don work that way) So I opt for the second choice: we could declare this to be a bug, and fix it by disabling the ROM BAR (by clearing bit 0). So If and when, I can test out a patch. -- Justin P. Mattock ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] 2009-06-24 17:27 pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] Justin Mattock 2009-06-24 19:30 ` Rafael J. Wysocki @ 2009-06-24 19:32 ` Jesse Barnes 2009-06-24 19:42 ` Justin Mattock 1 sibling, 1 reply; 7+ messages in thread From: Jesse Barnes @ 2009-06-24 19:32 UTC (permalink / raw) To: Justin Mattock; +Cc: Linux Kernel Mailing List On Wed, 24 Jun 2009 10:27:42 -0700 Justin Mattock <justinmattock@gmail.com> wrote: > (just pulled the latest git) > And am seeing this: > > > [ 0.696001] pci 0000:01:00.0: BAR 6: no parent found for of device > [0xfffe0000-0xffffffff] > [ 0.696010] pci 0000:02:00.0: BAR 6: no parent found for of device > [0xfffe0000-0xffffffff] > [ 0.696069] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > [ 0.696074] pci 0000:00:01.0: IO window: 0x3000-0x3fff > [ 0.696081] pci 0000:00:01.0: MEM window: 0x50300000-0x503fffff > [ 0.696087] pci 0000:00:01.0: PREFETCH window: > 0x00000040000000-0x00000047ffffff > [ 0.696096] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > [ 0.696102] pci 0000:00:1c.0: IO window: 0x2000-0x2fff > [ 0.696111] pci 0000:00:1c.0: MEM window: 0x50200000-0x502fffff > [ 0.696118] pci 0000:00:1c.0: PREFETCH window: > 0x50500000-0x505fffff [ 0.696126] pci 0000:00:1c.1: PCI bridge, > secondary bus 0000:03 [ 0.696130] pci 0000:00:1c.1: IO window: > disabled [ 0.696138] pci 0000:00:1c.1: MEM window: > 0x50100000-0x501fffff [ 0.696145] pci 0000:00:1c.1: PREFETCH > window: disabled [ 0.696152] pci 0000:00:1c.2: PCI bridge, > secondary bus 0000:04 [ 0.696158] pci 0000:00:1c.2: IO window: > 0x1000-0x1fff [ 0.696167] pci 0000:00:1c.2: MEM window: > 0x4c100000-0x500fffff [ 0.696174] pci 0000:00:1c.2: PREFETCH > window: 0x00000048000000-0x0000004bffffff > [ 0.696186] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c > [ 0.696190] pci 0000:00:1e.0: IO window: disabled > [ 0.696198] pci 0000:00:1e.0: MEM window: 0x4c000000-0x4c0fffff > [ 0.696205] pci 0000:00:1e.0: PREFETCH window: disabled > [ 0.696219] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 [ 0.696225] pci 0000:00:01.0: setting latency timer to 64 > [ 0.696235] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> > IRQ 17 [ 0.696243] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.696254] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> > IRQ 16 [ 0.696261] pci 0000:00:1c.1: setting latency timer to 64 > [ 0.696273] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> > IRQ 18 [ 0.696280] pci 0000:00:1c.2: setting latency timer to 64 > [ 0.696437] pci 0000:00:1e.0: power state changed by ACPI to D0 > [ 0.696446] pci 0000:00:1e.0: setting latency timer to 64 > > > Is this good or bad? > (BAR 6: no parent found for of device) There have been a few changes in this area recently, notably commit 9e9f46c44e487af0a82eb61b624553e2f7118f5b Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Jun 11 10:58:28 2009 -0700 PCI: use ACPI _CRS data by default and some related to commit ff54250a0ebab7f90a5f848a0ba63f999830c872 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Sat Apr 18 21:44:24 2009 -0700 Remove 'recurse into child resources' logic from ... The first you can control with the nocrs boot param, the other ones will have to be bisected through though... -- Jesse Barnes, Intel Open Source Technology Center ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] 2009-06-24 19:32 ` Jesse Barnes @ 2009-06-24 19:42 ` Justin Mattock 0 siblings, 0 replies; 7+ messages in thread From: Justin Mattock @ 2009-06-24 19:42 UTC (permalink / raw) To: Jesse Barnes; +Cc: Linux Kernel Mailing List On Wed, Jun 24, 2009 at 12:32 PM, Jesse Barnes<jbarnes@virtuousgeek.org> wrote: > On Wed, 24 Jun 2009 10:27:42 -0700 > Justin Mattock <justinmattock@gmail.com> wrote: > >> (just pulled the latest git) >> And am seeing this: >> >> >> [ 0.696001] pci 0000:01:00.0: BAR 6: no parent found for of device >> [0xfffe0000-0xffffffff] >> [ 0.696010] pci 0000:02:00.0: BAR 6: no parent found for of device >> [0xfffe0000-0xffffffff] >> [ 0.696069] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 >> [ 0.696074] pci 0000:00:01.0: IO window: 0x3000-0x3fff >> [ 0.696081] pci 0000:00:01.0: MEM window: 0x50300000-0x503fffff >> [ 0.696087] pci 0000:00:01.0: PREFETCH window: >> 0x00000040000000-0x00000047ffffff >> [ 0.696096] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 >> [ 0.696102] pci 0000:00:1c.0: IO window: 0x2000-0x2fff >> [ 0.696111] pci 0000:00:1c.0: MEM window: 0x50200000-0x502fffff >> [ 0.696118] pci 0000:00:1c.0: PREFETCH window: >> 0x50500000-0x505fffff [ 0.696126] pci 0000:00:1c.1: PCI bridge, >> secondary bus 0000:03 [ 0.696130] pci 0000:00:1c.1: IO window: >> disabled [ 0.696138] pci 0000:00:1c.1: MEM window: >> 0x50100000-0x501fffff [ 0.696145] pci 0000:00:1c.1: PREFETCH >> window: disabled [ 0.696152] pci 0000:00:1c.2: PCI bridge, >> secondary bus 0000:04 [ 0.696158] pci 0000:00:1c.2: IO window: >> 0x1000-0x1fff [ 0.696167] pci 0000:00:1c.2: MEM window: >> 0x4c100000-0x500fffff [ 0.696174] pci 0000:00:1c.2: PREFETCH >> window: 0x00000048000000-0x0000004bffffff >> [ 0.696186] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c >> [ 0.696190] pci 0000:00:1e.0: IO window: disabled >> [ 0.696198] pci 0000:00:1e.0: MEM window: 0x4c000000-0x4c0fffff >> [ 0.696205] pci 0000:00:1e.0: PREFETCH window: disabled >> [ 0.696219] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> >> IRQ 16 [ 0.696225] pci 0000:00:01.0: setting latency timer to 64 >> [ 0.696235] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> >> IRQ 17 [ 0.696243] pci 0000:00:1c.0: setting latency timer to 64 >> [ 0.696254] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> >> IRQ 16 [ 0.696261] pci 0000:00:1c.1: setting latency timer to 64 >> [ 0.696273] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> >> IRQ 18 [ 0.696280] pci 0000:00:1c.2: setting latency timer to 64 >> [ 0.696437] pci 0000:00:1e.0: power state changed by ACPI to D0 >> [ 0.696446] pci 0000:00:1e.0: setting latency timer to 64 >> >> >> Is this good or bad? >> (BAR 6: no parent found for of device) > > There have been a few changes in this area recently, notably > > commit 9e9f46c44e487af0a82eb61b624553e2f7118f5b > Author: Jesse Barnes <jbarnes@virtuousgeek.org> > Date: Thu Jun 11 10:58:28 2009 -0700 > > PCI: use ACPI _CRS data by default > > and some related to > > commit ff54250a0ebab7f90a5f848a0ba63f999830c872 > Author: Linus Torvalds <torvalds@linux-foundation.org> > Date: Sat Apr 18 21:44:24 2009 -0700 > > Remove 'recurse into child resources' logic from ... > > The first you can control with the nocrs boot param, the other ones > will have to be bisected through though... > > -- > Jesse Barnes, Intel Open Source Technology Center > output from lspci is: 01:00.0 VGA compatible controller: ATI Technologies Inc M56P [Radeon Mobility X1600] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22) (if I'm reading this correctly) I can try nocrs to see if it hides this or fixes this message, if not I can try the whole bisect thing(not sure If I can since I just cloned the kernel a few days ago, and didn't put any good or bad tags on the commit) As for the system itself, seems fine(except for this message) been streaming radio without any issues for a while now. -- Justin P. Mattock ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2009-06-24 20:41 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2009-06-24 17:27 pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] Justin Mattock 2009-06-24 19:30 ` Rafael J. Wysocki 2009-06-24 19:50 ` Matthew Wilcox 2009-06-24 20:04 ` Jesse Barnes 2009-06-24 20:41 ` Justin Mattock 2009-06-24 19:32 ` Jesse Barnes 2009-06-24 19:42 ` Justin Mattock
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®