From: Heiko Carstens <heiko.carstens@de.ibm.com>
To: Jason Baron <jbaron@redhat.com>
Cc: linux-kernel@vger.kernel.org, laijs@cn.fujitsu.com,
lizf@cn.fujitsu.com, rostedt@goodmis.org, fweisbec@gmail.com,
mingo@elte.hu, hpa@zytor.com, tglx@linutronix.de,
mhiramat@redhat.com, Martin Schwidefsky <schwidefsky@de.ibm.com>
Subject: Re: [PATCH 4/6] tracing: add tracing support for compat syscalls
Date: Tue, 9 Feb 2010 11:21:00 +0100 [thread overview]
Message-ID: <20100209102100.GA23838@osiris.boeblingen.de.ibm.com> (raw)
In-Reply-To: <20100208154325.GB2688@redhat.com>
On Mon, Feb 08, 2010 at 10:43:25AM -0500, Jason Baron wrote:
> On Wed, Feb 03, 2010 at 01:52:51PM +0100, Heiko Carstens wrote:
> > In order to avoid the whole ifdef mess some s390 files do include
> > asm/compat.h instead of linux/compat.h. This will get messy :)
>
> is there a way for s390 to use the common include/linux/compat.h file?
> what other arch defs are required?
The patch below is the smallest solution so that s390 still compiles
and probably even works:
Subject: [PATCH] compat: have generic is_compat_task for !CONFIG_COMPAT
From: Heiko Carstens <heiko.carstens@de.ibm.com>
..instead of an arch specific one.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
arch/s390/include/asm/compat.h | 7 -------
arch/s390/kernel/ptrace.c | 2 +-
arch/s390/kernel/setup.c | 2 +-
arch/s390/mm/mmap.c | 2 +-
drivers/s390/block/dasd_eckd.c | 2 +-
drivers/s390/block/dasd_ioctl.c | 1 +
drivers/s390/char/fs3270.c | 1 +
drivers/s390/char/vmcp.c | 1 +
drivers/s390/cio/chsc_sch.c | 1 +
drivers/s390/scsi/zfcp_cfdc.c | 1 +
include/linux/compat.h | 7 +++++++
11 files changed, 16 insertions(+), 11 deletions(-)
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -171,13 +171,6 @@ static inline int is_compat_task(void)
return test_thread_flag(TIF_31BIT);
}
-#else
-
-static inline int is_compat_task(void)
-{
- return 0;
-}
-
#endif
static inline void __user *compat_alloc_user_space(long len)
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -36,8 +36,8 @@
#include <linux/regset.h>
#include <linux/tracehook.h>
#include <linux/seccomp.h>
+#include <linux/compat.h>
#include <trace/syscall.h>
-#include <asm/compat.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -43,7 +43,7 @@
#include <linux/reboot.h>
#include <linux/topology.h>
#include <linux/ftrace.h>
-
+#include <linux/compat.h>
#include <asm/ipl.h>
#include <asm/uaccess.h>
#include <asm/system.h>
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -27,8 +27,8 @@
#include <linux/personality.h>
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/compat.h>
#include <asm/pgalloc.h>
-#include <asm/compat.h>
/*
* Top of mmap area (just below the process stack).
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -14,6 +14,7 @@
#include <linux/stddef.h>
#include <linux/kernel.h>
+#include <linux/compat.h>
#include <linux/slab.h>
#include <linux/hdreg.h> /* HDIO_GETGEO */
#include <linux/bio.h>
@@ -23,7 +24,6 @@
#include <asm/debug.h>
#include <asm/idals.h>
#include <asm/ebcdic.h>
-#include <asm/compat.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/cio.h>
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -17,6 +17,7 @@
#include <linux/fs.h>
#include <linux/blkpg.h>
#include <linux/smp_lock.h>
+#include <linux/compat.h>
#include <asm/compat.h>
#include <asm/ccwdev.h>
#include <asm/cmb.h>
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -14,6 +14,7 @@
#include <linux/list.h>
#include <linux/types.h>
#include <linux/smp_lock.h>
+#include <linux/compat.h>
#include <asm/compat.h>
#include <asm/ccwdev.h>
--- a/drivers/s390/char/vmcp.c
+++ b/drivers/s390/char/vmcp.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
+#include <linux/compat.h>
#include <asm/compat.h>
#include <asm/cpcmd.h>
#include <asm/debug.h>
--- a/drivers/s390/cio/chsc_sch.c
+++ b/drivers/s390/cio/chsc_sch.c
@@ -8,6 +8,7 @@
*/
#include <linux/device.h>
+#include <linux/compat.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
--- a/drivers/s390/scsi/zfcp_cfdc.c
+++ b/drivers/s390/scsi/zfcp_cfdc.c
@@ -12,6 +12,7 @@
#include <linux/types.h>
#include <linux/miscdevice.h>
+#include <linux/compat.h>
#include <asm/compat.h>
#include <asm/ccwdev.h>
#include "zfcp_def.h"
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -353,5 +353,12 @@ asmlinkage long compat_sys_newfstatat(un
asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
int flags, int mode);
+#else /* CONFIG_COMPAT */
+
+static inline int is_compat_task(void)
+{
+ return 0;
+}
+
#endif /* CONFIG_COMPAT */
#endif /* _LINUX_COMPAT_H */
next prev parent reply other threads:[~2010-02-09 10:21 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-02 21:21 [PATCH 0/6] tracing: add compat syscall support Jason Baron
2010-02-02 21:21 ` [PATCH 1/6] x86: add NR_syscalls_compat, make ia32 syscall table visible Jason Baron
2010-02-02 21:21 ` [PATCH 2/6] x86: add arch_compat_syscall_addr() Jason Baron
2010-02-02 21:21 ` [PATCH 3/6] tracing: remove syscall bitmaps in preparation for compat support Jason Baron
2010-02-02 21:21 ` [PATCH 4/6] tracing: add tracing support for compat syscalls Jason Baron
2010-02-03 12:52 ` Heiko Carstens
2010-02-08 15:43 ` Jason Baron
2010-02-08 16:34 ` Heiko Carstens
2010-02-09 10:21 ` Heiko Carstens [this message]
2010-02-09 14:54 ` Jason Baron
2010-02-02 21:21 ` [PATCH 5/6] syscalls: add define syscall prefix macro Jason Baron
2010-02-03 13:01 ` Heiko Carstens
2010-02-08 15:48 ` Jason Baron
2010-02-08 16:12 ` Arnd Bergmann
2010-02-08 17:54 ` Christoph Hellwig
2010-02-08 20:48 ` Arnd Bergmann
2010-02-08 16:53 ` Randy Dunlap
2010-02-08 17:11 ` Jason Baron
2010-02-10 3:00 ` Steven Rostedt
2010-02-02 21:22 ` [PATCH 6/6] x86: convert compat syscalls to use 'DEFINE_SYSCALL()' macros Jason Baron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100209102100.GA23838@osiris.boeblingen.de.ibm.com \
--to=heiko.carstens@de.ibm.com \
--cc=fweisbec@gmail.com \
--cc=hpa@zytor.com \
--cc=jbaron@redhat.com \
--cc=laijs@cn.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lizf@cn.fujitsu.com \
--cc=mhiramat@redhat.com \
--cc=mingo@elte.hu \
--cc=rostedt@goodmis.org \
--cc=schwidefsky@de.ibm.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®