mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Antonio Ospite <ospite@studenti.unina.it>
To: Simon Wood <simon@mungewell.org>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Marcin Tolysz <tolysz@gmail.com>, Jiri Kosina <jkosina@suse.cz>
Subject: Re: [PATCH 2/2] sony_ff_byteswap_accelerometer
Date: Wed, 1 Jun 2011 21:53:22 +0200	[thread overview]
Message-ID: <20110601215322.2572aecf.ospite@studenti.unina.it> (raw)
In-Reply-To: <1306145999-15643-2-git-send-email-simon@mungewell.org>

[-- Attachment #1: Type: text/plain, Size: 2279 bytes --]

On Mon, 23 May 2011 03:19:59 -0700
Simon Wood <simon@mungewell.org> wrote:

> The accelerometers/gyro on the sixaxis are reported in the wrong
> endianness (ie. not compatible with HID), so this patch intercepts
> the report and swaps the appropriate bytes over.
> 
> Accelerometers are scaled with a nominal value of +/-4000 = 1G,
> maximum value would be around +/-32768 = 8G.
> 
> Gyro on my device always reports -32768, might need some calibration
> set within the controller.
> ---
>  drivers/hid/hid-sony.c |   19 +++++++++++++++++++
>  1 files changed, 19 insertions(+), 0 deletions(-)
>

Should this one have Marcin as the original author or at least as the
first Signed-off-by, and an additional Signed-off-by you Simon?

Thanks,
  Antonio

> diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
> index 5c930dc..f219746 100644
> --- a/drivers/hid/hid-sony.c
> +++ b/drivers/hid/hid-sony.c
> @@ -57,6 +57,24 @@ static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
>  	return rdesc;
>  }
>  
> +/* Sixaxis HID report has acclerometers/gyro with MSByte first, this has
> + * to be BYTE_SWAPPED before passing up to joystick interface
> + */
> +static int sony_raw_event(struct hid_device *hdev, struct hid_report *report, __u8 *rd, int size)
> +{
> +	struct sony_sc *sc = hid_get_drvdata(hdev);
> +
> +	if ((sc->quirks & SIXAXIS_CONTROLLER_USB) &&
> +			rd[0] == 0x01 && size == 49) {
> +		swap(rd[41], rd[42]);
> +		swap(rd[43], rd[44]);
> +		swap(rd[45], rd[46]);
> +		swap(rd[47], rd[48]);
> +	}
> +
> +	return 0;
> +}
> +
>  /*
>   * The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP
>   * like it should according to usbhid/hid-core.c::usbhid_output_raw_report()
> @@ -205,6 +223,7 @@ static struct hid_driver sony_driver = {
>  	.probe = sony_probe,
>  	.remove = sony_remove,
>  	.report_fixup = sony_report_fixup,
> +	.raw_event = sony_raw_event
>  };
>  
>  static int __init sony_init(void)
> -- 
> 1.7.4.1
> 
> 


-- 
Antonio Ospite
http://ao2.it

PGP public key ID: 0x4553B001

A: Because it messes up the order in which people normally read text.
   See http://en.wikipedia.org/wiki/Posting_style
Q: Why is top-posting such a bad thing?

[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

  reply	other threads:[~2011-06-01 19:53 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <80b32cfd7dc9e8afee2c4d9e21d1a7e3.squirrel@host171.canaca.com>
2011-05-23 10:19 ` [PATCH 1/2] sony_ff_hid_descriptor Simon Wood
2011-05-23 10:19   ` [PATCH 2/2] sony_ff_byteswap_accelerometer Simon Wood
2011-06-01 19:53     ` Antonio Ospite [this message]
2011-06-01 19:49   ` [PATCH 1/2] sony_ff_hid_descriptor Antonio Ospite
2011-06-07 13:32     ` Jiri Kosina
2011-06-07 13:32       ` Jiri Kosina
2011-06-07 14:12       ` Antonio Ospite
2011-06-07 15:53       ` simon
2011-06-07 19:40         ` Antonio Ospite
2011-05-23 10:23 ` Simon Wood
2011-05-23 10:23   ` [PATCH 2/2] sony_ff_byteswap_accelerometer Simon Wood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110601215322.2572aecf.ospite@studenti.unina.it \
    --to=ospite@studenti.unina.it \
    --cc=jkosina@suse.cz \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=simon@mungewell.org \
    --cc=tolysz@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®