mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
	akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
	Steven Finney <steven.finney@palm.com>,
	Dave Jones <davej@redhat.com>
Subject: [04/91] [CPUFREQ] Fix memory leak in cpufreq_stat
Date: Wed, 15 Jun 2011 17:15:01 -0700	[thread overview]
Message-ID: <20110616001609.690074048@clark.kroah.org> (raw)
In-Reply-To: <20110616001900.GA25375@kroah.com>

2.6.32-longterm review patch.  If anyone has any objections, please let us know.

------------------

From: steven finney <Steven.Finney@palm.com>

commit 98586ed8b8878e10691203687e89a42fa3355300 upstream.

When a CPU is taken offline in an SMP system, cpufreq_remove_dev()
nulls out the per-cpu policy before cpufreq_stats_free_table() can
make use of it.  cpufreq_stats_free_table() then skips the
call to sysfs_remove_group(), leaving about 100 bytes of sysfs-related
memory unclaimed each time a CPU-removal occurs. Break up
cpu_stats_free_table into sysfs and table portions, and
call the sysfs portion early.

Signed-off-by: Steven Finney <steven.finney@palm.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/cpufreq/cpufreq_stats.c |   21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -164,17 +164,27 @@ static int freq_table_get_index(struct c
 	return -1;
 }
 
+/* should be called late in the CPU removal sequence so that the stats
+ * memory is still available in case someone tries to use it.
+ */
 static void cpufreq_stats_free_table(unsigned int cpu)
 {
 	struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, cpu);
-	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
-	if (policy && policy->cpu == cpu)
-		sysfs_remove_group(&policy->kobj, &stats_attr_group);
 	if (stat) {
 		kfree(stat->time_in_state);
 		kfree(stat);
 	}
 	per_cpu(cpufreq_stats_table, cpu) = NULL;
+}
+
+/* must be called early in the CPU removal sequence (before
+ * cpufreq_remove_dev) so that policy is still valid.
+ */
+static void cpufreq_stats_free_sysfs(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	if (policy && policy->cpu == cpu)
+		sysfs_remove_group(&policy->kobj, &stats_attr_group);
 	if (policy)
 		cpufreq_cpu_put(policy);
 }
@@ -315,6 +325,9 @@ static int __cpuinit cpufreq_stat_cpu_ca
 	case CPU_ONLINE_FROZEN:
 		cpufreq_update_policy(cpu);
 		break;
+	case CPU_DOWN_PREPARE:
+		cpufreq_stats_free_sysfs(cpu);
+		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 		cpufreq_stats_free_table(cpu);
@@ -323,9 +336,11 @@ static int __cpuinit cpufreq_stat_cpu_ca
 	return NOTIFY_OK;
 }
 
+/* priority=1 so this will get called before cpufreq_remove_dev */
 static struct notifier_block cpufreq_stat_cpu_notifier __refdata =
 {
 	.notifier_call = cpufreq_stat_cpu_callback,
+	.priority = 1,
 };
 
 static struct notifier_block notifier_policy_block = {



  parent reply	other threads:[~2011-06-16  7:05 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-16  0:19 [00/91] 2.6.32.42-longterm review Greg KH
2011-06-16  0:14 ` [01/91] ftrace: Only update the function code on write to filter files Greg KH
2011-06-16  0:14 ` [02/91] kmemleak: Do not return a pointer to an object that kmemleak did not get Greg KH
2011-06-16  0:15 ` [03/91] [CPUFREQ] CPU hotplug, re-create sysfs directory and symlinks Greg KH
2011-06-16  0:15 ` Greg KH [this message]
2011-06-16  0:15 ` [05/91] powerpc/kexec: Fix memory corruption from unallocated slaves Greg KH
2011-06-16  0:15 ` [06/91] powerpc/oprofile: Handle events that raise an exception without overflowing Greg KH
2011-06-16  0:15 ` [07/91] block: rescan partitions on invalidated devices on -ENOMEDIA Greg KH
2011-06-16  0:15 ` [08/91] block: add proper state guards to __elv_next_request Greg KH
2011-06-16  0:15 ` [09/91] mtd: mtdconcat: fix NAND OOB write Greg KH
2011-06-16  0:15 ` [10/91] x86, 64-bit: Fix copy_[to/from]_user() checks for the Greg KH
2011-06-16  0:15 ` [11/91] ext3: Fix fs corruption when make_indexed_dir() fails Greg KH
2011-06-16  0:15 ` [12/91] jbd: Fix forever sleeping process in do_get_write_access() Greg KH
2011-06-16  0:15 ` [13/91] jbd: fix fsync() tid wraparound bug Greg KH
2011-06-16  0:15 ` [14/91] ext4: release page cache in ext4_mb_load_buddy error path Greg KH
2011-06-16  0:15 ` [15/91] [SCSI] Fix Ultrastor asm snippet Greg KH
2011-06-16  0:15 ` [16/91] x86, amd: Do not enable ARAT feature on AMD processors below Greg KH
2011-06-16  0:15 ` [17/91] x86, amd: Use _safe() msr access for GartTlbWlk disable code Greg KH
2011-06-16  0:15 ` [18/91] rcu: Fix unpaired rcu_irq_enter() from locking selftests Greg KH
2011-06-16  0:15 ` [19/91] staging: usbip: fix wrong endian conversion Greg KH
2011-06-16  0:15 ` [20/91] Fix for buffer overflow in ldm_frag_add not sufficient Greg KH
2011-06-16  0:15 ` [21/91] seqlock: Dont smp_rmb in seqlock reader spin loop Greg KH
2011-06-16  0:15 ` [22/91] ALSA: HDA: Use one dmic only for Dell Studio 1558 Greg KH
2011-06-16  0:15 ` [23/91] ASoC: Ensure output PGA is enabled for line outputs in Greg KH
2011-06-16  0:15 ` [24/91] ASoC: Add some missing volume update bit sets for wm_hubs Greg KH
2011-06-16  0:15 ` [25/91] mm/page_alloc.c: prevent unending loop in Greg KH
2011-06-16  0:15 ` [26/91] PCI: allow matching of prefetchable resources to Greg KH
2011-06-16  0:15 ` [27/91] loop: limit max_part module param to DISK_MAX_PARTS Greg KH
2011-06-16  0:15 ` [28/91] loop: handle on-demand devices correctly Greg KH
2011-06-16  0:15 ` [29/91] USB: CP210x Add 4 Device IDs for AC-Services Devices Greg KH
2011-06-16  0:15 ` [30/91] USB: moto_modem: Add USB identifier for the Motorola VE240 Greg KH
2011-06-16  0:15 ` [31/91] USB: serial: ftdi_sio: adding support for TavIR STK500 Greg KH
2011-06-16  0:15 ` [32/91] USB: gamin_gps: Fix for data transfer problems in native Greg KH
2011-06-16  0:15 ` [33/91] usb/gadget: at91sam9g20 fix end point max packet size Greg KH
2011-06-16  0:15 ` [34/91] usb: gadget: rndis: dont test against req->length Greg KH
2011-06-16  0:15 ` [35/91] xhci: Fix full speed bInterval encoding Greg KH
2011-06-16  0:15 ` [36/91] OHCI: fix regression caused by nVidia shutdown workaround Greg KH
2011-06-16  0:15 ` [37/91] p54usb: add zoom 4410 usbid Greg KH
2011-06-16  0:15 ` [38/91] eCryptfs: Allow 2 scatterlist entries for encrypted Greg KH
2011-06-16  0:15 ` [39/91] UBIFS: fix a rare memory leak in ro to rw remounting path Greg KH
2011-06-16  0:15 ` [40/91] i8k: Avoid lahf in 64-bit code Greg KH
2011-06-16  0:15 ` [53/91] UBIFS: fix shrinker object count reports Greg KH
2011-06-16  0:15 ` [54/91] UBIFS: fix memory leak on error path Greg KH
2011-06-16  0:15 ` [55/91] nbd: limit module parameters to a sane value Greg KH
2011-06-17 20:36 ` [Stable-review] [00/91] 2.6.32.42-longterm review Nikola Ciprich
2011-06-20 22:28   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110616001609.690074048@clark.kroah.org \
    --to=gregkh@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=davej@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable-review@kernel.org \
    --cc=stable@kernel.org \
    --cc=steven.finney@palm.com \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®