mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
	akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
	Jesse Barnes <jbarnes@virtuousgeek.org>,
	Seth Forshee <seth.forshee@canonical.com>
Subject: [26/91] PCI: allow matching of prefetchable resources to
Date: Wed, 15 Jun 2011 17:15:23 -0700	[thread overview]
Message-ID: <20110616001611.887734901@clark.kroah.org> (raw)
In-Reply-To: <20110616001900.GA25375@kroah.com>

2.6.32-longterm review patch.  If anyone has any objections, please let us know.

------------------
 non-prefetchable windows

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 8c8def26bfaa704db67d515da3eb92cf26067548 upstream.

I'm not entirely sure it needs to go into 32, but it's probably the right
thing to do. Another way of explaining the patch is:

 - we currently pick the _first_ exactly matching bus resource entry, but
   the _last_ inexactly matching one. Normally first/last shouldn't
   matter, but bus resource entries aren't actually all created equal: in
   a transparent bus, the last resources will be the parent resources,
   which we should generally try to avoid unless we have no choice. So
   "first matching" is the thing we should always aim for.

 - the patch is a bit bigger than it needs to be, because I simplified the
   logic at the same time. It used to be a fairly incomprehensible

	if ((res->flags & IORESOURCE_PREFETCH) && !(r->flags & IORESOURCE_PREFETCH))
		best = r;       /* Approximating prefetchable by non-prefetchable */

   and technically, all the patch did was to make that complex choice be
   even more complex (it basically added a "&& !best" to say that if we
   already gound a non-prefetchable window for the prefetchable resource,
   then we won't override an earlier one with that later one: remember
   "first matching").

 - So instead of that complex one with three separate conditionals in one,
   I split it up a bit, and am taking advantage of the fact that we
   already handled the exact case, so if 'res->flags' has the PREFETCH
   bit, then we already know that 'r->flags' will _not_ have it. So the
   simplified code drops the redundant test, and does the new '!best' test
   separately. It also uses 'continue' as a way to ignore the bus
   resource we know doesn't work (ie a prefetchable bus resource is _not_
   acceptable for anything but an exact match), so it turns into:

	/* We can't insert a non-prefetch resource inside a prefetchable parent .. */
	if (r->flags & IORESOURCE_PREFETCH)
		continue;
	/* .. but we can put a prefetchable resource inside a non-prefetchable one */
	if (!best)
		best = r;

   instead. With the comments, it's now six lines instead of two, but it's
   conceptually simpler, and I _could_ have written it as two lines:

	if ((res->flags & IORESOURCE_PREFETCH) && !best)
		best = r;	/* Approximating prefetchable by non-prefetchable */

   but I thought that was too damn subtle.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


---
 drivers/pci/pci.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -373,8 +373,12 @@ pci_find_parent_resource(const struct pc
 			continue;	/* Wrong type */
 		if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH))
 			return r;	/* Exact match */
-		if ((res->flags & IORESOURCE_PREFETCH) && !(r->flags & IORESOURCE_PREFETCH))
-			best = r;	/* Approximating prefetchable by non-prefetchable */
+		/* We can't insert a non-prefetch resource inside a prefetchable parent .. */
+		if (r->flags & IORESOURCE_PREFETCH)
+			continue;
+		/* .. but we can put a prefetchable resource inside a non-prefetchable one */
+		if (!best)
+			best = r;
 	}
 	return best;
 }



  parent reply	other threads:[~2011-06-16  7:09 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-16  0:19 [00/91] 2.6.32.42-longterm review Greg KH
2011-06-16  0:14 ` [01/91] ftrace: Only update the function code on write to filter files Greg KH
2011-06-16  0:14 ` [02/91] kmemleak: Do not return a pointer to an object that kmemleak did not get Greg KH
2011-06-16  0:15 ` [03/91] [CPUFREQ] CPU hotplug, re-create sysfs directory and symlinks Greg KH
2011-06-16  0:15 ` [04/91] [CPUFREQ] Fix memory leak in cpufreq_stat Greg KH
2011-06-16  0:15 ` [05/91] powerpc/kexec: Fix memory corruption from unallocated slaves Greg KH
2011-06-16  0:15 ` [06/91] powerpc/oprofile: Handle events that raise an exception without overflowing Greg KH
2011-06-16  0:15 ` [07/91] block: rescan partitions on invalidated devices on -ENOMEDIA Greg KH
2011-06-16  0:15 ` [08/91] block: add proper state guards to __elv_next_request Greg KH
2011-06-16  0:15 ` [09/91] mtd: mtdconcat: fix NAND OOB write Greg KH
2011-06-16  0:15 ` [10/91] x86, 64-bit: Fix copy_[to/from]_user() checks for the Greg KH
2011-06-16  0:15 ` [11/91] ext3: Fix fs corruption when make_indexed_dir() fails Greg KH
2011-06-16  0:15 ` [12/91] jbd: Fix forever sleeping process in do_get_write_access() Greg KH
2011-06-16  0:15 ` [13/91] jbd: fix fsync() tid wraparound bug Greg KH
2011-06-16  0:15 ` [14/91] ext4: release page cache in ext4_mb_load_buddy error path Greg KH
2011-06-16  0:15 ` [15/91] [SCSI] Fix Ultrastor asm snippet Greg KH
2011-06-16  0:15 ` [16/91] x86, amd: Do not enable ARAT feature on AMD processors below Greg KH
2011-06-16  0:15 ` [17/91] x86, amd: Use _safe() msr access for GartTlbWlk disable code Greg KH
2011-06-16  0:15 ` [18/91] rcu: Fix unpaired rcu_irq_enter() from locking selftests Greg KH
2011-06-16  0:15 ` [19/91] staging: usbip: fix wrong endian conversion Greg KH
2011-06-16  0:15 ` [20/91] Fix for buffer overflow in ldm_frag_add not sufficient Greg KH
2011-06-16  0:15 ` [21/91] seqlock: Dont smp_rmb in seqlock reader spin loop Greg KH
2011-06-16  0:15 ` [22/91] ALSA: HDA: Use one dmic only for Dell Studio 1558 Greg KH
2011-06-16  0:15 ` [23/91] ASoC: Ensure output PGA is enabled for line outputs in Greg KH
2011-06-16  0:15 ` [24/91] ASoC: Add some missing volume update bit sets for wm_hubs Greg KH
2011-06-16  0:15 ` [25/91] mm/page_alloc.c: prevent unending loop in Greg KH
2011-06-16  0:15 ` Greg KH [this message]
2011-06-16  0:15 ` [27/91] loop: limit max_part module param to DISK_MAX_PARTS Greg KH
2011-06-16  0:15 ` [28/91] loop: handle on-demand devices correctly Greg KH
2011-06-16  0:15 ` [29/91] USB: CP210x Add 4 Device IDs for AC-Services Devices Greg KH
2011-06-16  0:15 ` [30/91] USB: moto_modem: Add USB identifier for the Motorola VE240 Greg KH
2011-06-16  0:15 ` [31/91] USB: serial: ftdi_sio: adding support for TavIR STK500 Greg KH
2011-06-16  0:15 ` [32/91] USB: gamin_gps: Fix for data transfer problems in native Greg KH
2011-06-16  0:15 ` [33/91] usb/gadget: at91sam9g20 fix end point max packet size Greg KH
2011-06-16  0:15 ` [34/91] usb: gadget: rndis: dont test against req->length Greg KH
2011-06-16  0:15 ` [35/91] xhci: Fix full speed bInterval encoding Greg KH
2011-06-16  0:15 ` [36/91] OHCI: fix regression caused by nVidia shutdown workaround Greg KH
2011-06-16  0:15 ` [37/91] p54usb: add zoom 4410 usbid Greg KH
2011-06-16  0:15 ` [38/91] eCryptfs: Allow 2 scatterlist entries for encrypted Greg KH
2011-06-16  0:15 ` [39/91] UBIFS: fix a rare memory leak in ro to rw remounting path Greg KH
2011-06-16  0:15 ` [40/91] i8k: Avoid lahf in 64-bit code Greg KH
2011-06-16  0:15 ` [53/91] UBIFS: fix shrinker object count reports Greg KH
2011-06-16  0:15 ` [54/91] UBIFS: fix memory leak on error path Greg KH
2011-06-16  0:15 ` [55/91] nbd: limit module parameters to a sane value Greg KH
2011-06-17 20:36 ` [Stable-review] [00/91] 2.6.32.42-longterm review Nikola Ciprich
2011-06-20 22:28   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110616001611.887734901@clark.kroah.org \
    --to=gregkh@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=seth.forshee@canonical.com \
    --cc=stable-review@kernel.org \
    --cc=stable@kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®