From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Tejun Heo <tj@kernel.org>, Jens Axboe <jaxboe@fusionio.com>
Subject: [07/91] block: rescan partitions on invalidated devices on -ENOMEDIA
Date: Wed, 15 Jun 2011 17:15:04 -0700 [thread overview]
Message-ID: <20110616001609.982608957@clark.kroah.org> (raw)
In-Reply-To: <20110616001900.GA25375@kroah.com>
2.6.32-longterm review patch. If anyone has any objections, please let us know.
------------------
too
From: Tejun Heo <tj@kernel.org>
commit 02e352287a40bd456eb78df705bf888bc3161d3f upstream.
__blkdev_get() doesn't rescan partitions if disk->fops->open() fails,
which leads to ghost partition devices lingering after medimum removal
is known to both the kernel and userland. The behavior also creates a
subtle inconsistency where O_NONBLOCK open, which doesn't fail even if
there's no medium, clears the ghots partitions, which is exploited to
work around the problem from userland.
Fix it by updating __blkdev_get() to issue partition rescan after
-ENOMEDIA too.
This was reported in the following bz.
https://bugzilla.kernel.org/show_bug.cgi?id=13029
Stable: 2.6.38
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Zeuthen <zeuthen@gmail.com>
Reported-by: Martin Pitt <martin.pitt@ubuntu.com>
Reported-by: Kay Sievers <kay.sievers@vrfy.org>
Tested-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
fs/block_dev.c | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1203,6 +1203,7 @@ static int __blkdev_get(struct block_dev
if (!bdev->bd_part)
goto out_clear;
+ ret = 0;
if (disk->fops->open) {
ret = disk->fops->open(bdev, mode);
if (ret == -ERESTARTSYS) {
@@ -1218,9 +1219,18 @@ static int __blkdev_get(struct block_dev
mutex_unlock(&bdev->bd_mutex);
goto restart;
}
- if (ret)
- goto out_clear;
}
+ /*
+ * If the device is invalidated, rescan partition
+ * if open succeeded or failed with -ENOMEDIUM.
+ * The latter is necessary to prevent ghost
+ * partitions on a removed medium.
+ */
+ if (bdev->bd_invalidated && (!ret || ret == -ENOMEDIUM))
+ rescan_partitions(disk, bdev);
+ if (ret)
+ goto out_clear;
+
if (!bdev->bd_openers) {
bd_set_size(bdev,(loff_t)get_capacity(disk)<<9);
bdi = blk_get_backing_dev_info(bdev);
@@ -1228,8 +1238,6 @@ static int __blkdev_get(struct block_dev
bdi = &default_backing_dev_info;
bdev->bd_inode->i_data.backing_dev_info = bdi;
}
- if (bdev->bd_invalidated)
- rescan_partitions(disk, bdev);
} else {
struct block_device *whole;
whole = bdget_disk(disk, 0);
@@ -1256,13 +1264,14 @@ static int __blkdev_get(struct block_dev
put_disk(disk);
disk = NULL;
if (bdev->bd_contains == bdev) {
- if (bdev->bd_disk->fops->open) {
+ ret = 0;
+ if (bdev->bd_disk->fops->open)
ret = bdev->bd_disk->fops->open(bdev, mode);
- if (ret)
- goto out_unlock_bdev;
- }
- if (bdev->bd_invalidated)
+ /* the same as first opener case, read comment there */
+ if (bdev->bd_invalidated && (!ret || ret == -ENOMEDIUM))
rescan_partitions(bdev->bd_disk, bdev);
+ if (ret)
+ goto out_unlock_bdev;
}
}
bdev->bd_openers++;
next prev parent reply other threads:[~2011-06-16 7:05 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-16 0:19 [00/91] 2.6.32.42-longterm review Greg KH
2011-06-16 0:14 ` [01/91] ftrace: Only update the function code on write to filter files Greg KH
2011-06-16 0:14 ` [02/91] kmemleak: Do not return a pointer to an object that kmemleak did not get Greg KH
2011-06-16 0:15 ` [03/91] [CPUFREQ] CPU hotplug, re-create sysfs directory and symlinks Greg KH
2011-06-16 0:15 ` [04/91] [CPUFREQ] Fix memory leak in cpufreq_stat Greg KH
2011-06-16 0:15 ` [05/91] powerpc/kexec: Fix memory corruption from unallocated slaves Greg KH
2011-06-16 0:15 ` [06/91] powerpc/oprofile: Handle events that raise an exception without overflowing Greg KH
2011-06-16 0:15 ` Greg KH [this message]
2011-06-16 0:15 ` [08/91] block: add proper state guards to __elv_next_request Greg KH
2011-06-16 0:15 ` [09/91] mtd: mtdconcat: fix NAND OOB write Greg KH
2011-06-16 0:15 ` [10/91] x86, 64-bit: Fix copy_[to/from]_user() checks for the Greg KH
2011-06-16 0:15 ` [11/91] ext3: Fix fs corruption when make_indexed_dir() fails Greg KH
2011-06-16 0:15 ` [12/91] jbd: Fix forever sleeping process in do_get_write_access() Greg KH
2011-06-16 0:15 ` [13/91] jbd: fix fsync() tid wraparound bug Greg KH
2011-06-16 0:15 ` [14/91] ext4: release page cache in ext4_mb_load_buddy error path Greg KH
2011-06-16 0:15 ` [15/91] [SCSI] Fix Ultrastor asm snippet Greg KH
2011-06-16 0:15 ` [16/91] x86, amd: Do not enable ARAT feature on AMD processors below Greg KH
2011-06-16 0:15 ` [17/91] x86, amd: Use _safe() msr access for GartTlbWlk disable code Greg KH
2011-06-16 0:15 ` [18/91] rcu: Fix unpaired rcu_irq_enter() from locking selftests Greg KH
2011-06-16 0:15 ` [19/91] staging: usbip: fix wrong endian conversion Greg KH
2011-06-16 0:15 ` [20/91] Fix for buffer overflow in ldm_frag_add not sufficient Greg KH
2011-06-16 0:15 ` [21/91] seqlock: Dont smp_rmb in seqlock reader spin loop Greg KH
2011-06-16 0:15 ` [22/91] ALSA: HDA: Use one dmic only for Dell Studio 1558 Greg KH
2011-06-16 0:15 ` [23/91] ASoC: Ensure output PGA is enabled for line outputs in Greg KH
2011-06-16 0:15 ` [24/91] ASoC: Add some missing volume update bit sets for wm_hubs Greg KH
2011-06-16 0:15 ` [25/91] mm/page_alloc.c: prevent unending loop in Greg KH
2011-06-16 0:15 ` [26/91] PCI: allow matching of prefetchable resources to Greg KH
2011-06-16 0:15 ` [27/91] loop: limit max_part module param to DISK_MAX_PARTS Greg KH
2011-06-16 0:15 ` [28/91] loop: handle on-demand devices correctly Greg KH
2011-06-16 0:15 ` [29/91] USB: CP210x Add 4 Device IDs for AC-Services Devices Greg KH
2011-06-16 0:15 ` [30/91] USB: moto_modem: Add USB identifier for the Motorola VE240 Greg KH
2011-06-16 0:15 ` [31/91] USB: serial: ftdi_sio: adding support for TavIR STK500 Greg KH
2011-06-16 0:15 ` [32/91] USB: gamin_gps: Fix for data transfer problems in native Greg KH
2011-06-16 0:15 ` [33/91] usb/gadget: at91sam9g20 fix end point max packet size Greg KH
2011-06-16 0:15 ` [34/91] usb: gadget: rndis: dont test against req->length Greg KH
2011-06-16 0:15 ` [35/91] xhci: Fix full speed bInterval encoding Greg KH
2011-06-16 0:15 ` [36/91] OHCI: fix regression caused by nVidia shutdown workaround Greg KH
2011-06-16 0:15 ` [37/91] p54usb: add zoom 4410 usbid Greg KH
2011-06-16 0:15 ` [38/91] eCryptfs: Allow 2 scatterlist entries for encrypted Greg KH
2011-06-16 0:15 ` [39/91] UBIFS: fix a rare memory leak in ro to rw remounting path Greg KH
2011-06-16 0:15 ` [40/91] i8k: Avoid lahf in 64-bit code Greg KH
2011-06-16 0:15 ` [53/91] UBIFS: fix shrinker object count reports Greg KH
2011-06-16 0:15 ` [54/91] UBIFS: fix memory leak on error path Greg KH
2011-06-16 0:15 ` [55/91] nbd: limit module parameters to a sane value Greg KH
2011-06-17 20:36 ` [Stable-review] [00/91] 2.6.32.42-longterm review Nikola Ciprich
2011-06-20 22:28 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110616001609.982608957@clark.kroah.org \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jaxboe@fusionio.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=tj@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®