mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
	akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
	Stefan Richter <stefanr@s5r6.in-berlin.de>
Subject: [031/102] firewire: cdev: prevent race between first get_info ioctl and bus reset event queuing
Date: Wed, 03 Aug 2011 15:00:51 -0700	[thread overview]
Message-ID: <20110803221247.121601684@clark.kroah.org> (raw)
In-Reply-To: <20110803221345.GA10346@kroah.com>

3.0-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Stefan Richter <stefanr@s5r6.in-berlin.de>

commit 93b37905f70083d6143f5f4dba0a45cc64379a62 upstream.

Between open(2) of a /dev/fw* and the first FW_CDEV_IOC_GET_INFO
ioctl(2) on it, the kernel already queues FW_CDEV_EVENT_BUS_RESET events
to be read(2) by the client.  The get_info ioctl is practically always
issued right away after open, hence this condition only occurs if the
client opens during a bus reset, especially during a rapid series of bus
resets.

The problem with this condition is twofold:

  - These bus reset events carry the (as yet undocumented) @closure
    value of 0.  But it is not the kernel's place to choose closures;
    they are privat to the client.  E.g., this 0 value forced from the
    kernel makes it unsafe for clients to dereference it as a pointer to
    a closure object without NULL pointer check.

  - It is impossible for clients to determine the relative order of bus
    reset events from get_info ioctl(2) versus those from read(2),
    except in one way:  By comparison of closure values.  Again, such a
    procedure imposes complexity on clients and reduces freedom in use
    of the bus reset closure.

So, change the ABI to suppress queuing of bus reset events before the
first FW_CDEV_IOC_GET_INFO ioctl was issued by the client.

Note, this ABI change cannot be version-controlled.  The kernel cannot
distinguish old from new clients before the first FW_CDEV_IOC_GET_INFO
ioctl.

We will try to back-merge this change into currently maintained stable/
longterm series, and we only document the new behaviour.  The old
behavior is now considered a kernel bug, which it basically is.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: <stable@kernel.org>

---
 drivers/firewire/core-cdev.c  |   18 ++++++++++--------
 include/linux/firewire-cdev.h |    3 +++
 2 files changed, 13 insertions(+), 8 deletions(-)

--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -253,14 +253,11 @@ static int fw_device_op_open(struct inod
 	init_waitqueue_head(&client->wait);
 	init_waitqueue_head(&client->tx_flush_wait);
 	INIT_LIST_HEAD(&client->phy_receiver_link);
+	INIT_LIST_HEAD(&client->link);
 	kref_init(&client->kref);
 
 	file->private_data = client;
 
-	mutex_lock(&device->client_list_mutex);
-	list_add_tail(&client->link, &device->client_list);
-	mutex_unlock(&device->client_list_mutex);
-
 	return nonseekable_open(inode, file);
 }
 
@@ -451,15 +448,20 @@ static int ioctl_get_info(struct client
 	if (ret != 0)
 		return -EFAULT;
 
+	mutex_lock(&client->device->client_list_mutex);
+
 	client->bus_reset_closure = a->bus_reset_closure;
 	if (a->bus_reset != 0) {
 		fill_bus_reset_event(&bus_reset, client);
-		if (copy_to_user(u64_to_uptr(a->bus_reset),
-				 &bus_reset, sizeof(bus_reset)))
-			return -EFAULT;
+		ret = copy_to_user(u64_to_uptr(a->bus_reset),
+				   &bus_reset, sizeof(bus_reset));
 	}
+	if (ret == 0 && list_empty(&client->link))
+		list_add_tail(&client->link, &client->device->client_list);
 
-	return 0;
+	mutex_unlock(&client->device->client_list_mutex);
+
+	return ret ? -EFAULT : 0;
 }
 
 static int add_client_resource(struct client *client,
--- a/include/linux/firewire-cdev.h
+++ b/include/linux/firewire-cdev.h
@@ -475,6 +475,9 @@ union fw_cdev_event {
  *		of the bus.  This does not cause a bus reset to happen.
  * @bus_reset_closure: Value of &closure in this and subsequent bus reset events
  * @card:	The index of the card this device belongs to
+ *
+ * As a side effect, reception of %FW_CDEV_EVENT_BUS_RESET events to be read(2)
+ * is started by this ioctl.
  */
 struct fw_cdev_get_info {
 	__u32 version;



  parent reply	other threads:[~2011-08-03 23:28 UTC|newest]

Thread overview: 103+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-03 22:13 [000/102] 3.0.1-stable review Greg KH
2011-08-03 22:00 ` [001/102] USB: serial: add IDs for WinChipHead USB->RS232 adapter Greg KH
2011-08-03 22:00 ` [002/102] mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency Greg KH
2011-08-03 22:00 ` [003/102] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared Greg KH
2011-08-03 22:00 ` [004/102] bridge: send proper message_age in config BPDU Greg KH
2011-08-03 22:00 ` [005/102] gro: Only reset frag0 when skb can be pulled Greg KH
2011-08-03 22:00 ` [006/102] Staging: usbip: vhci-hcd: Do not kill already dead RX/TX kthread Greg KH
2011-08-03 22:00 ` [007/102] staging: r8192e_pci: Handle duplicate PCI ID 0x10ec:0x8192 conflict with rtl8192se Greg KH
2011-08-03 22:00 ` [008/102] staging: comedi: fix infoleak to userspace Greg KH
2011-08-03 22:00 ` [009/102] Staging: hv: storvsc: Increase the timeout value in the storvsc driver Greg KH
2011-08-03 22:00 ` [010/102] Staging: hv: vmbus: Increase the timeout value in the vmbus driver Greg KH
2011-08-03 22:00 ` [011/102] Staging: hv: netvsc: Increase the timeout value in the netvsc driver Greg KH
2011-08-03 22:00 ` [012/102] USB: OHCI: fix another regression for NVIDIA controllers Greg KH
2011-08-03 22:00 ` [013/102] USB: EHCI: go back to using the system clock for QH unlinks Greg KH
2011-08-03 22:00 ` [014/102] usb: musb: restore INDEX register in resume path Greg KH
2011-08-03 22:00 ` [015/102] rtc: handle errors correctly in rtc_irq_set_state() Greg KH
2011-08-03 22:00 ` [016/102] rtc: fix hrtimer deadlock Greg KH
2011-08-03 22:00 ` [017/102] rtc: limit frequency Greg KH
2011-08-03 22:00 ` [018/102] drivers/rtc/rtc-tegra.c: properly initialize spinlock Greg KH
2011-08-03 22:00 ` [019/102] ARM: pxa/cm-x300: fix V3020 RTC functionality Greg KH
2011-08-03 22:00 ` [020/102] ASoC: davinci: add missing break statement Greg KH
2011-08-03 22:00 ` [021/102] ASoC: davinci: fix codec start and stop functions Greg KH
2011-08-03 22:00 ` [022/102] ASoC: Mark cache as dirty when suspending Greg KH
2011-08-03 22:00 ` [023/102] ath6kl: cache firmware Greg KH
2011-08-03 22:00 ` [024/102] ath6kl: fix crash when interface is closed but scan is ongoing Greg KH
2011-08-03 22:00 ` [025/102] ath9k_hw: Fix incorrect key_miss handling Greg KH
2011-08-03 22:00 ` [026/102] CIFS: Fix oops while mounting with prefixpath Greg KH
2011-08-03 22:00 ` [027/102] staging: brcm80211: fix for reported log spam problem Greg KH
2011-08-03 22:00 ` [028/102] jme: Fix unmap error (Causing system freeze) Greg KH
2011-08-03 22:00 ` [029/102] ethtool: Allow zero-length register dumps again Greg KH
2011-08-03 22:00 ` [030/102] firewire: cdev: return -ENOTTY for unimplemented ioctls, not -EINVAL Greg KH
2011-08-03 22:00 ` Greg KH [this message]
2011-08-03 22:00 ` [032/102] IB/srp: Avoid duplicate devices from LUN scan Greg KH
2011-08-03 22:00 ` [033/102] [SCSI] libsas: remove expander from dev list on error Greg KH
2011-08-03 22:00 ` [034/102] rtlwifi: rtl8192cu: Fix duplicate if test Greg KH
2011-08-03 22:00 ` [035/102] mac80211: Restart STA timers only on associated state Greg KH
2011-08-03 22:00 ` [036/102] irq_work, ppc: Fix up arch hooks Greg KH
2011-08-03 22:00 ` [037/102] perf tools, x86: Fix 32-bit compile on 64-bit system Greg KH
2011-08-03 22:00 ` [038/102] perf tools: Fix endian conversion reading event attr from file header Greg KH
2011-08-03 22:00 ` [039/102] x86, intel, power: Initialize MSR_IA32_ENERGY_PERF_BIAS Greg KH
2011-08-03 22:01 ` [040/102] perf: Fix software event overflow Greg KH
2011-08-03 22:01 ` [041/102] [SCSI] Blacklist Traxdata CDR4120 and IOMEGA Zip drive to avoid lock ups Greg KH
2011-08-03 22:01 ` [042/102] [SCSI] sr: check_events() ignore GET_EVENT when TUR says otherwise Greg KH
2011-08-03 22:01 ` [043/102] [SCSI] ses: requesting a fault indication Greg KH
2011-08-03 22:01 ` [044/102] [SCSI] fix crash in scsi_dispatch_cmd() Greg KH
2011-08-03 22:01 ` [045/102] [SCSI] pmcraid: reject negative request size Greg KH
2011-08-03 22:01 ` [046/102] [SCSI] hpsa: do not attempt to read from a write-only register Greg KH
2011-08-03 22:01 ` [047/102] drm/radeon/kms: fix i2c map for rv250/280 Greg KH
2011-08-03 22:01 ` [048/102] drm/radeon/kms: fix DP training for DPEncoderService revision bigger than 1.1 Greg KH
2011-08-03 22:01 ` [049/102] drm/radeon/kms: add missing vddci setting on NI+ Greg KH
2011-08-03 22:01 ` [050/102] ALSA: virtuoso: fix silent analog output on Xonar Essence ST Deluxe Greg KH
2011-08-03 22:01 ` [051/102] ALSA: hda - Fix duplicated DAC assignments for Realtek Greg KH
2011-08-03 22:01 ` [052/102] pnfs: save layoutcommit lwb at layout header Greg KH
2011-08-03 22:01 ` [053/102] pnfs: save layoutcommit cred at layout header init Greg KH
2011-08-03 22:01 ` [054/102] pnfs: let layoutcommit handle a list of lseg Greg KH
2011-08-03 22:01 ` [055/102] pnfs: use lwb as layoutcommit length Greg KH
2011-08-03 22:01 ` [056/102] kexec, x86: Fix incorrect jump back address if not preserving context Greg KH
2011-08-03 22:01 ` [057/102] oprofile, x86: Fix nmi-unsafe callgraph support Greg KH
2011-08-03 22:01 ` [058/102] powerpc/kdump: Fix timeout in crash_kexec_wait_realmode Greg KH
2011-08-03 22:01 ` [059/102] irq_work, alpha: Fix up arch hooks Greg KH
2011-08-03 22:01 ` [060/102] tracing: Fix bug when reading system filters on module removal Greg KH
2011-08-03 22:01 ` [061/102] tracing: Have "enable" file use refcounts like the "filter" file Greg KH
2011-08-03 22:01 ` [062/102] XZ: Fix missing <linux/kernel.h> include Greg KH
2011-08-03 22:01 ` [063/102] PCI: ARI is a PCIe v2 feature Greg KH
2011-08-03 22:01 ` [064/102] cciss: do not attempt to read from a write-only register Greg KH
2011-08-03 22:01 ` [065/102] drivers/firmware/sigma.c needs MODULE_LICENSE Greg KH
2011-08-03 22:01 ` [066/102] geode: reflect mfgpt dependency on mfd Greg KH
2011-08-03 22:01 ` [067/102] mm/futex: fix futex writes on archs with SW tracking of dirty & young Greg KH
2011-08-03 22:01 ` [068/102] mm/backing-dev.c: reset bdi min_ratio in bdi_unregister() Greg KH
2011-08-03 22:01 ` [069/102] xtensa: prevent arbitrary read in ptrace Greg KH
2011-08-03 22:01 ` [070/102] ext4: fix i_blocks/quota accounting when extent insertion fails Greg KH
2011-08-03 22:01 ` [071/102] ext4: free allocated and pre-allocated blocks when check_eofblocks_fl fails Greg KH
2011-08-03 22:01 ` [072/102] ext3: Fix oops in ext3_try_to_allocate_with_rsv() Greg KH
2011-08-03 22:01 ` [073/102] ecryptfs: Make inode bdi consistent with superblock bdi Greg KH
2011-08-03 22:01 ` [074/102] eCryptfs: Unlock keys needed by ecryptfsd Greg KH
2011-08-03 22:01 ` [075/102] nfsd: dont break lease on CLAIM_DELEGATE_CUR Greg KH
2011-08-03 22:01 ` [076/102] nfsd4: remember to put RW access on stateid destruction Greg KH
2011-08-03 22:01 ` [077/102] nfsd4: fix file leak on open_downgrade Greg KH
2011-08-03 22:01 ` [078/102] svcrpc: fix list-corrupting race on nfsd shutdown Greg KH
2011-08-03 22:01 ` [079/102] NFSv4: Dont use the delegation->inode in nfs_mark_return_delegation() Greg KH
2011-08-03 22:01 ` [080/102] NFS: Fix spurious readdir cookie loop messages Greg KH
2011-08-03 22:01 ` [081/102] proc: fix a race in do_io_accounting() Greg KH
2011-08-03 22:01 ` [082/102] n_gsm: fix the wrong FCS handling Greg KH
2011-08-03 22:01 ` [083/102] EHCI: only power off port if over-current is active Greg KH
2011-08-03 22:01 ` [084/102] EHCI: fix direction handling for interrupt data toggles Greg KH
2011-08-03 22:01 ` [085/102] cfg80211: really ignore the regulatory request Greg KH
2011-08-03 22:01 ` [086/102] memcg: fix behavior of mem_cgroup_resize_limit() Greg KH
2011-08-03 22:01 ` [087/102] tty/serial: Fix XSCALE serial ports, e.g. ce4100 Greg KH
2011-08-03 22:01 ` [088/102] SERIAL: SC26xx: Fix link error Greg KH
2011-08-03 22:01 ` [089/102] powerpc/pseries/hvconsole: Fix dropped console output Greg KH
2011-08-03 22:01 ` [090/102] hvc_console: Improve tty/console put_chars handling Greg KH
2011-08-03 22:01 ` [091/102] ipc/sem.c: fix race with concurrent semtimedop() timeouts and IPC_RMID Greg KH
2011-08-03 22:01 ` [092/102] AppArmor: Fix reference to rcu protected pointer outside of rcu_read_lock Greg KH
2011-08-03 22:01 ` [093/102] AppArmor: Fix masking of capabilities in complain mode Greg KH
2011-08-03 22:01 ` [094/102] oom: task->mm == NULL doesnt mean the memory was freed Greg KH
2011-08-03 22:01 ` [095/102] rt2x00: Add device ID for RT539F device Greg KH
2011-08-03 22:01 ` [096/102] GFS2: Fix mount hang caused by certain access pattern to sysfs files Greg KH
2011-08-03 22:01 ` [097/102] watchdog: shwdt: fix usage of mod_timer Greg KH
2011-08-03 22:01 ` [098/102] ALSA: sound/core/pcm_compat.c: adjust array index Greg KH
2011-08-03 22:01 ` [099/102] dm io: flush cpu cache with vmapped io Greg KH
2011-08-03 22:02 ` [100/102] dm snapshot: flush disk cache when merging Greg KH
2011-08-03 22:02 ` [101/102] dm mpath: fix potential NULL pointer in feature arg processing Greg KH
2011-08-03 22:02 ` [102/102] dm: fix idr leak on module removal Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110803221247.121601684@clark.kroah.org \
    --to=gregkh@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable-review@kernel.org \
    --cc=stable@kernel.org \
    --cc=stefanr@s5r6.in-berlin.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®