From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
John Lumby <johnlumby@hotmail.com>,
Maynard Johnson <maynardj@us.ibm.com>,
Robert Richter <robert.richter@amd.com>
Subject: [057/102] oprofile, x86: Fix nmi-unsafe callgraph support
Date: Wed, 03 Aug 2011 15:01:17 -0700 [thread overview]
Message-ID: <20110803221249.738174322@clark.kroah.org> (raw)
In-Reply-To: <20110803221345.GA10346@kroah.com>
3.0-stable review patch. If anyone has any objections, please let us know.
------------------
From: Robert Richter <robert.richter@amd.com>
commit a0e3e70243f5b270bc3eca718f0a9fa5e6b8262e upstream.
Current oprofile's x86 callgraph support may trigger page faults
throwing the BUG_ON(in_nmi()) message below. This patch fixes this by
using the same nmi-safe copy-from-user code as in perf.
------------[ cut here ]------------
kernel BUG at .../arch/x86/kernel/traps.c:436!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:07:00.0/0000:08:04.0/net/eth0/broadcast
CPU 5
Modules linked in:
Pid: 8611, comm: opcontrol Not tainted 2.6.39-00007-gfe47ae7 #1 Advanced Micro Device Anaheim/Anaheim
RIP: 0010:[<ffffffff813e8e35>] [<ffffffff813e8e35>] do_nmi+0x22/0x1ee
RSP: 0000:ffff88042fd47f28 EFLAGS: 00010002
RAX: ffff88042c0a7fd8 RBX: 0000000000000001 RCX: 00000000c0000101
RDX: 00000000ffff8804 RSI: ffffffffffffffff RDI: ffff88042fd47f58
RBP: ffff88042fd47f48 R08: 0000000000000004 R09: 0000000000001484
R10: 0000000000000001 R11: 0000000000000000 R12: ffff88042fd47f58
R13: 0000000000000000 R14: ffff88042fd47d98 R15: 0000000000000020
FS: 00007fca25e56700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000074 CR3: 000000042d28b000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process opcontrol (pid: 8611, threadinfo ffff88042c0a6000, task ffff88042c532310)
Stack:
0000000000000000 0000000000000001 ffff88042c0a7fd8 0000000000000000
ffff88042fd47de8 ffffffff813e897a 0000000000000020 ffff88042fd47d98
0000000000000000 ffff88042c0a7fd8 ffff88042fd47de8 0000000000000074
Call Trace:
<NMI>
[<ffffffff813e897a>] nmi+0x1a/0x20
[<ffffffff813f08ab>] ? bad_to_user+0x25/0x771
<<EOE>>
Code: ff 59 5b 41 5c 41 5d c9 c3 55 65 48 8b 04 25 88 b5 00 00 48 89 e5 41 55 41 54 49 89 fc 53 48 83 ec 08 f6 80 47 e0 ff ff 04 74 04 <0f> 0b eb fe 81 80 44 e0 ff ff 00 00 01 04 65 ff 04 25 c4 0f 01
RIP [<ffffffff813e8e35>] do_nmi+0x22/0x1ee
RSP <ffff88042fd47f28>
---[ end trace ed6752185092104b ]---
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 8611, comm: opcontrol Tainted: G D 2.6.39-00007-gfe47ae7 #1
Call Trace:
<NMI> [<ffffffff813e5e0a>] panic+0x8c/0x188
[<ffffffff813e915c>] oops_end+0x81/0x8e
[<ffffffff8100403d>] die+0x55/0x5e
[<ffffffff813e8c45>] do_trap+0x11c/0x12b
[<ffffffff810023c8>] do_invalid_op+0x91/0x9a
[<ffffffff813e8e35>] ? do_nmi+0x22/0x1ee
[<ffffffff8131e6fa>] ? oprofile_add_sample+0x83/0x95
[<ffffffff81321670>] ? op_amd_check_ctrs+0x4f/0x2cf
[<ffffffff813ee4d5>] invalid_op+0x15/0x20
[<ffffffff813e8e35>] ? do_nmi+0x22/0x1ee
[<ffffffff813e8e7a>] ? do_nmi+0x67/0x1ee
[<ffffffff813e897a>] nmi+0x1a/0x20
[<ffffffff813f08ab>] ? bad_to_user+0x25/0x771
<<EOE>>
Cc: John Lumby <johnlumby@hotmail.com>
Cc: Maynard Johnson <maynardj@us.ibm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
arch/x86/oprofile/backtrace.c | 56 +++++++++++++++++++++++++++++++++++-------
1 file changed, 47 insertions(+), 9 deletions(-)
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -11,10 +11,12 @@
#include <linux/oprofile.h>
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/compat.h>
+#include <linux/highmem.h>
+
#include <asm/ptrace.h>
#include <asm/uaccess.h>
#include <asm/stacktrace.h>
-#include <linux/compat.h>
static int backtrace_stack(void *data, char *name)
{
@@ -36,17 +38,53 @@ static struct stacktrace_ops backtrace_o
.walk_stack = print_context_stack,
};
+/* from arch/x86/kernel/cpu/perf_event.c: */
+
+/*
+ * best effort, GUP based copy_from_user() that assumes IRQ or NMI context
+ */
+static unsigned long
+copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
+{
+ unsigned long offset, addr = (unsigned long)from;
+ unsigned long size, len = 0;
+ struct page *page;
+ void *map;
+ int ret;
+
+ do {
+ ret = __get_user_pages_fast(addr, 1, 0, &page);
+ if (!ret)
+ break;
+
+ offset = addr & (PAGE_SIZE - 1);
+ size = min(PAGE_SIZE - offset, n - len);
+
+ map = kmap_atomic(page);
+ memcpy(to, map+offset, size);
+ kunmap_atomic(map);
+ put_page(page);
+
+ len += size;
+ to += size;
+ addr += size;
+
+ } while (len < n);
+
+ return len;
+}
+
#ifdef CONFIG_COMPAT
static struct stack_frame_ia32 *
dump_user_backtrace_32(struct stack_frame_ia32 *head)
{
+ /* Also check accessibility of one struct frame_head beyond: */
struct stack_frame_ia32 bufhead[2];
struct stack_frame_ia32 *fp;
+ unsigned long bytes;
- /* Also check accessibility of one struct frame_head beyond */
- if (!access_ok(VERIFY_READ, head, sizeof(bufhead)))
- return NULL;
- if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead)))
+ bytes = copy_from_user_nmi(bufhead, head, sizeof(bufhead));
+ if (bytes != sizeof(bufhead))
return NULL;
fp = (struct stack_frame_ia32 *) compat_ptr(bufhead[0].next_frame);
@@ -87,12 +125,12 @@ x86_backtrace_32(struct pt_regs * const
static struct stack_frame *dump_user_backtrace(struct stack_frame *head)
{
+ /* Also check accessibility of one struct frame_head beyond: */
struct stack_frame bufhead[2];
+ unsigned long bytes;
- /* Also check accessibility of one struct stack_frame beyond */
- if (!access_ok(VERIFY_READ, head, sizeof(bufhead)))
- return NULL;
- if (__copy_from_user_inatomic(bufhead, head, sizeof(bufhead)))
+ bytes = copy_from_user_nmi(bufhead, head, sizeof(bufhead));
+ if (bytes != sizeof(bufhead))
return NULL;
oprofile_add_trace(bufhead[0].return_address);
next prev parent reply other threads:[~2011-08-03 23:30 UTC|newest]
Thread overview: 103+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-03 22:13 [000/102] 3.0.1-stable review Greg KH
2011-08-03 22:00 ` [001/102] USB: serial: add IDs for WinChipHead USB->RS232 adapter Greg KH
2011-08-03 22:00 ` [002/102] mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency Greg KH
2011-08-03 22:00 ` [003/102] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared Greg KH
2011-08-03 22:00 ` [004/102] bridge: send proper message_age in config BPDU Greg KH
2011-08-03 22:00 ` [005/102] gro: Only reset frag0 when skb can be pulled Greg KH
2011-08-03 22:00 ` [006/102] Staging: usbip: vhci-hcd: Do not kill already dead RX/TX kthread Greg KH
2011-08-03 22:00 ` [007/102] staging: r8192e_pci: Handle duplicate PCI ID 0x10ec:0x8192 conflict with rtl8192se Greg KH
2011-08-03 22:00 ` [008/102] staging: comedi: fix infoleak to userspace Greg KH
2011-08-03 22:00 ` [009/102] Staging: hv: storvsc: Increase the timeout value in the storvsc driver Greg KH
2011-08-03 22:00 ` [010/102] Staging: hv: vmbus: Increase the timeout value in the vmbus driver Greg KH
2011-08-03 22:00 ` [011/102] Staging: hv: netvsc: Increase the timeout value in the netvsc driver Greg KH
2011-08-03 22:00 ` [012/102] USB: OHCI: fix another regression for NVIDIA controllers Greg KH
2011-08-03 22:00 ` [013/102] USB: EHCI: go back to using the system clock for QH unlinks Greg KH
2011-08-03 22:00 ` [014/102] usb: musb: restore INDEX register in resume path Greg KH
2011-08-03 22:00 ` [015/102] rtc: handle errors correctly in rtc_irq_set_state() Greg KH
2011-08-03 22:00 ` [016/102] rtc: fix hrtimer deadlock Greg KH
2011-08-03 22:00 ` [017/102] rtc: limit frequency Greg KH
2011-08-03 22:00 ` [018/102] drivers/rtc/rtc-tegra.c: properly initialize spinlock Greg KH
2011-08-03 22:00 ` [019/102] ARM: pxa/cm-x300: fix V3020 RTC functionality Greg KH
2011-08-03 22:00 ` [020/102] ASoC: davinci: add missing break statement Greg KH
2011-08-03 22:00 ` [021/102] ASoC: davinci: fix codec start and stop functions Greg KH
2011-08-03 22:00 ` [022/102] ASoC: Mark cache as dirty when suspending Greg KH
2011-08-03 22:00 ` [023/102] ath6kl: cache firmware Greg KH
2011-08-03 22:00 ` [024/102] ath6kl: fix crash when interface is closed but scan is ongoing Greg KH
2011-08-03 22:00 ` [025/102] ath9k_hw: Fix incorrect key_miss handling Greg KH
2011-08-03 22:00 ` [026/102] CIFS: Fix oops while mounting with prefixpath Greg KH
2011-08-03 22:00 ` [027/102] staging: brcm80211: fix for reported log spam problem Greg KH
2011-08-03 22:00 ` [028/102] jme: Fix unmap error (Causing system freeze) Greg KH
2011-08-03 22:00 ` [029/102] ethtool: Allow zero-length register dumps again Greg KH
2011-08-03 22:00 ` [030/102] firewire: cdev: return -ENOTTY for unimplemented ioctls, not -EINVAL Greg KH
2011-08-03 22:00 ` [031/102] firewire: cdev: prevent race between first get_info ioctl and bus reset event queuing Greg KH
2011-08-03 22:00 ` [032/102] IB/srp: Avoid duplicate devices from LUN scan Greg KH
2011-08-03 22:00 ` [033/102] [SCSI] libsas: remove expander from dev list on error Greg KH
2011-08-03 22:00 ` [034/102] rtlwifi: rtl8192cu: Fix duplicate if test Greg KH
2011-08-03 22:00 ` [035/102] mac80211: Restart STA timers only on associated state Greg KH
2011-08-03 22:00 ` [036/102] irq_work, ppc: Fix up arch hooks Greg KH
2011-08-03 22:00 ` [037/102] perf tools, x86: Fix 32-bit compile on 64-bit system Greg KH
2011-08-03 22:00 ` [038/102] perf tools: Fix endian conversion reading event attr from file header Greg KH
2011-08-03 22:00 ` [039/102] x86, intel, power: Initialize MSR_IA32_ENERGY_PERF_BIAS Greg KH
2011-08-03 22:01 ` [040/102] perf: Fix software event overflow Greg KH
2011-08-03 22:01 ` [041/102] [SCSI] Blacklist Traxdata CDR4120 and IOMEGA Zip drive to avoid lock ups Greg KH
2011-08-03 22:01 ` [042/102] [SCSI] sr: check_events() ignore GET_EVENT when TUR says otherwise Greg KH
2011-08-03 22:01 ` [043/102] [SCSI] ses: requesting a fault indication Greg KH
2011-08-03 22:01 ` [044/102] [SCSI] fix crash in scsi_dispatch_cmd() Greg KH
2011-08-03 22:01 ` [045/102] [SCSI] pmcraid: reject negative request size Greg KH
2011-08-03 22:01 ` [046/102] [SCSI] hpsa: do not attempt to read from a write-only register Greg KH
2011-08-03 22:01 ` [047/102] drm/radeon/kms: fix i2c map for rv250/280 Greg KH
2011-08-03 22:01 ` [048/102] drm/radeon/kms: fix DP training for DPEncoderService revision bigger than 1.1 Greg KH
2011-08-03 22:01 ` [049/102] drm/radeon/kms: add missing vddci setting on NI+ Greg KH
2011-08-03 22:01 ` [050/102] ALSA: virtuoso: fix silent analog output on Xonar Essence ST Deluxe Greg KH
2011-08-03 22:01 ` [051/102] ALSA: hda - Fix duplicated DAC assignments for Realtek Greg KH
2011-08-03 22:01 ` [052/102] pnfs: save layoutcommit lwb at layout header Greg KH
2011-08-03 22:01 ` [053/102] pnfs: save layoutcommit cred at layout header init Greg KH
2011-08-03 22:01 ` [054/102] pnfs: let layoutcommit handle a list of lseg Greg KH
2011-08-03 22:01 ` [055/102] pnfs: use lwb as layoutcommit length Greg KH
2011-08-03 22:01 ` [056/102] kexec, x86: Fix incorrect jump back address if not preserving context Greg KH
2011-08-03 22:01 ` Greg KH [this message]
2011-08-03 22:01 ` [058/102] powerpc/kdump: Fix timeout in crash_kexec_wait_realmode Greg KH
2011-08-03 22:01 ` [059/102] irq_work, alpha: Fix up arch hooks Greg KH
2011-08-03 22:01 ` [060/102] tracing: Fix bug when reading system filters on module removal Greg KH
2011-08-03 22:01 ` [061/102] tracing: Have "enable" file use refcounts like the "filter" file Greg KH
2011-08-03 22:01 ` [062/102] XZ: Fix missing <linux/kernel.h> include Greg KH
2011-08-03 22:01 ` [063/102] PCI: ARI is a PCIe v2 feature Greg KH
2011-08-03 22:01 ` [064/102] cciss: do not attempt to read from a write-only register Greg KH
2011-08-03 22:01 ` [065/102] drivers/firmware/sigma.c needs MODULE_LICENSE Greg KH
2011-08-03 22:01 ` [066/102] geode: reflect mfgpt dependency on mfd Greg KH
2011-08-03 22:01 ` [067/102] mm/futex: fix futex writes on archs with SW tracking of dirty & young Greg KH
2011-08-03 22:01 ` [068/102] mm/backing-dev.c: reset bdi min_ratio in bdi_unregister() Greg KH
2011-08-03 22:01 ` [069/102] xtensa: prevent arbitrary read in ptrace Greg KH
2011-08-03 22:01 ` [070/102] ext4: fix i_blocks/quota accounting when extent insertion fails Greg KH
2011-08-03 22:01 ` [071/102] ext4: free allocated and pre-allocated blocks when check_eofblocks_fl fails Greg KH
2011-08-03 22:01 ` [072/102] ext3: Fix oops in ext3_try_to_allocate_with_rsv() Greg KH
2011-08-03 22:01 ` [073/102] ecryptfs: Make inode bdi consistent with superblock bdi Greg KH
2011-08-03 22:01 ` [074/102] eCryptfs: Unlock keys needed by ecryptfsd Greg KH
2011-08-03 22:01 ` [075/102] nfsd: dont break lease on CLAIM_DELEGATE_CUR Greg KH
2011-08-03 22:01 ` [076/102] nfsd4: remember to put RW access on stateid destruction Greg KH
2011-08-03 22:01 ` [077/102] nfsd4: fix file leak on open_downgrade Greg KH
2011-08-03 22:01 ` [078/102] svcrpc: fix list-corrupting race on nfsd shutdown Greg KH
2011-08-03 22:01 ` [079/102] NFSv4: Dont use the delegation->inode in nfs_mark_return_delegation() Greg KH
2011-08-03 22:01 ` [080/102] NFS: Fix spurious readdir cookie loop messages Greg KH
2011-08-03 22:01 ` [081/102] proc: fix a race in do_io_accounting() Greg KH
2011-08-03 22:01 ` [082/102] n_gsm: fix the wrong FCS handling Greg KH
2011-08-03 22:01 ` [083/102] EHCI: only power off port if over-current is active Greg KH
2011-08-03 22:01 ` [084/102] EHCI: fix direction handling for interrupt data toggles Greg KH
2011-08-03 22:01 ` [085/102] cfg80211: really ignore the regulatory request Greg KH
2011-08-03 22:01 ` [086/102] memcg: fix behavior of mem_cgroup_resize_limit() Greg KH
2011-08-03 22:01 ` [087/102] tty/serial: Fix XSCALE serial ports, e.g. ce4100 Greg KH
2011-08-03 22:01 ` [088/102] SERIAL: SC26xx: Fix link error Greg KH
2011-08-03 22:01 ` [089/102] powerpc/pseries/hvconsole: Fix dropped console output Greg KH
2011-08-03 22:01 ` [090/102] hvc_console: Improve tty/console put_chars handling Greg KH
2011-08-03 22:01 ` [091/102] ipc/sem.c: fix race with concurrent semtimedop() timeouts and IPC_RMID Greg KH
2011-08-03 22:01 ` [092/102] AppArmor: Fix reference to rcu protected pointer outside of rcu_read_lock Greg KH
2011-08-03 22:01 ` [093/102] AppArmor: Fix masking of capabilities in complain mode Greg KH
2011-08-03 22:01 ` [094/102] oom: task->mm == NULL doesnt mean the memory was freed Greg KH
2011-08-03 22:01 ` [095/102] rt2x00: Add device ID for RT539F device Greg KH
2011-08-03 22:01 ` [096/102] GFS2: Fix mount hang caused by certain access pattern to sysfs files Greg KH
2011-08-03 22:01 ` [097/102] watchdog: shwdt: fix usage of mod_timer Greg KH
2011-08-03 22:01 ` [098/102] ALSA: sound/core/pcm_compat.c: adjust array index Greg KH
2011-08-03 22:01 ` [099/102] dm io: flush cpu cache with vmapped io Greg KH
2011-08-03 22:02 ` [100/102] dm snapshot: flush disk cache when merging Greg KH
2011-08-03 22:02 ` [101/102] dm mpath: fix potential NULL pointer in feature arg processing Greg KH
2011-08-03 22:02 ` [102/102] dm: fix idr leak on module removal Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110803221249.738174322@clark.kroah.org \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=johnlumby@hotmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maynardj@us.ibm.com \
--cc=robert.richter@amd.com \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®