* [PATCH 22/24] Staging: comedi: fix printk issue in das1800.c
2011-10-19 12:04 [PATCH 21/24] Staging: comedi: fix warning issue in cb_das16_cs.c Ravishankar Karkala Mallikarjunayya
@ 2011-10-19 12:04 ` Ravishankar Karkala Mallikarjunayya
2011-10-19 12:04 ` [PATCH 23/24] Staging: comedi: fix printk issue in adv_pci1710.c Ravishankar Karkala Mallikarjunayya
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Ravishankar Karkala Mallikarjunayya @ 2011-10-19 12:04 UTC (permalink / raw)
To: gregkh, wfp5p; +Cc: devel, linux-kernel, Ravishankar Karkala Mallikarjunayya
This is a patch to the das1800.c file that fixes up a printk
warning found by the checkpatch.pl tool
Converted printks to dev_printk.
Removed unnecessary printk statements.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
---
drivers/staging/comedi/drivers/das1800.c | 90 +++++++++++++-----------------
1 files changed, 39 insertions(+), 51 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index a6df30b..354ddc7 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -573,22 +573,23 @@ static int das1800_init_dma(struct comedi_device *dev, unsigned int dma0,
devpriv->dma_bits |= DMA_CH7_CH5;
break;
default:
- printk(" only supports dma channels 5 through 7\n"
- " Dual dma only allows the following combinations:\n"
- " dma 5,6 / 6,7 / or 7,5\n");
+ dev_err(dev->hw_dev, " only supports dma channels 5 through 7\n"
+ " Dual dma only allows the following combinations:\n"
+ " dma 5,6 / 6,7 / or 7,5\n");
return -EINVAL;
break;
}
if (request_dma(dma0, driver_das1800.driver_name)) {
- printk(" failed to allocate dma channel %i\n", dma0);
+ dev_err(dev->hw_dev, "failed to allocate dma channel %i\n",
+ dma0);
return -EINVAL;
}
devpriv->dma0 = dma0;
devpriv->dma_current = dma0;
if (dma1) {
if (request_dma(dma1, driver_das1800.driver_name)) {
- printk(" failed to allocate dma channel %i\n",
- dma1);
+ dev_err(dev->hw_dev, "failed to allocate dma channel %i\n",
+ dma1);
return -EINVAL;
}
devpriv->dma1 = dma1;
@@ -631,35 +632,31 @@ static int das1800_attach(struct comedi_device *dev,
if (alloc_private(dev, sizeof(struct das1800_private)) < 0)
return -ENOMEM;
- printk("comedi%d: %s: io 0x%lx", dev->minor, driver_das1800.driver_name,
- iobase);
if (irq) {
- printk(", irq %u", irq);
+ dev_dbg(dev->hw_dev, "irq %u\n", irq);
if (dma0) {
- printk(", dma %u", dma0);
+ dev_dbg(dev->hw_dev, "dma %u\n", dma0);
if (dma1)
- printk(" and %u", dma1);
+ dev_dbg(dev->hw_dev, "and %u\n", dma1);
}
}
- printk("\n");
if (iobase == 0) {
- printk(" io base address required\n");
+ dev_err(dev->hw_dev, "io base address required\n");
return -EINVAL;
}
/* check if io addresses are available */
if (!request_region(iobase, DAS1800_SIZE, driver_das1800.driver_name)) {
- printk
- (" I/O port conflict: failed to allocate ports 0x%lx to 0x%lx\n",
- iobase, iobase + DAS1800_SIZE - 1);
+ dev_err(dev->hw_dev, "I/O port conflict: failed to allocate ports 0x%lx to 0x%lx\n",
+ iobase, iobase + DAS1800_SIZE - 1);
return -EIO;
}
dev->iobase = iobase;
board = das1800_probe(dev);
if (board < 0) {
- printk(" unable to determine board type\n");
+ dev_err(dev->hw_dev, "unable to determine board type\n");
return -ENODEV;
}
@@ -671,9 +668,8 @@ static int das1800_attach(struct comedi_device *dev,
iobase2 = iobase + IOBASE2;
if (!request_region(iobase2, DAS1800_SIZE,
driver_das1800.driver_name)) {
- printk
- (" I/O port conflict: failed to allocate ports 0x%lx to 0x%lx\n",
- iobase2, iobase2 + DAS1800_SIZE - 1);
+ dev_err(dev->hw_dev, "I/O port conflict: failed to allocate ports 0x%lx to 0x%lx\n",
+ iobase2, iobase2 + DAS1800_SIZE - 1);
return -EIO;
}
devpriv->iobase2 = iobase2;
@@ -683,7 +679,8 @@ static int das1800_attach(struct comedi_device *dev,
if (irq) {
if (request_irq(irq, das1800_interrupt, 0,
driver_das1800.driver_name, dev)) {
- printk(" unable to allocate irq %u\n", irq);
+ dev_err(dev->hw_dev, "unable to allocate irq %u\n",
+ irq);
return -EINVAL;
}
}
@@ -712,7 +709,7 @@ static int das1800_attach(struct comedi_device *dev,
devpriv->irq_dma_bits |= 0x38;
break;
default:
- printk(" irq out of range\n");
+ dev_err(dev->hw_dev, "irq out of range\n");
return -EINVAL;
break;
}
@@ -813,9 +810,6 @@ static int das1800_detach(struct comedi_device *dev)
kfree(devpriv->ai_buf1);
}
- printk("comedi%d: %s: remove\n", dev->minor,
- driver_das1800.driver_name);
-
return 0;
};
@@ -833,69 +827,63 @@ static int das1800_probe(struct comedi_device *dev)
case 0x3:
if (board == das1801st_da || board == das1802st_da ||
board == das1701st_da || board == das1702st_da) {
- printk(" Board model: %s\n",
- das1800_boards[board].name);
+ dev_dbg(dev->hw_dev, "Board model: %s\n",
+ das1800_boards[board].name);
return board;
}
- printk
- (" Board model (probed, not recommended): das-1800st-da series\n");
+ dev_dbg(dev->hw_dev, "Board model (probed, not recommended): das-1800st-da series\n");
return das1801st;
break;
case 0x4:
if (board == das1802hr_da || board == das1702hr_da) {
- printk(" Board model: %s\n",
- das1800_boards[board].name);
+ dev_dbg(dev->hw_dev, "Board model: %s\n",
+ das1800_boards[board].name);
return board;
}
- printk
- (" Board model (probed, not recommended): das-1802hr-da\n");
+ dev_dbg(dev->hw_dev, "Board model (probed, not recommended): das-1802hr-da\n");
return das1802hr;
break;
case 0x5:
if (board == das1801ao || board == das1802ao ||
board == das1701ao || board == das1702ao) {
- printk(" Board model: %s\n",
- das1800_boards[board].name);
+ dev_dbg(dev->hw_dev, "Board model: %s\n",
+ das1800_boards[board].name);
return board;
}
- printk
- (" Board model (probed, not recommended): das-1800ao series\n");
+ dev_dbg(dev->hw_dev, "Board model (probed, not recommended): das-1800ao series\n");
return das1801ao;
break;
case 0x6:
if (board == das1802hr || board == das1702hr) {
- printk(" Board model: %s\n",
- das1800_boards[board].name);
+ dev_dbg(dev->hw_dev, "Board model: %s\n",
+ das1800_boards[board].name);
return board;
}
- printk(" Board model (probed, not recommended): das-1802hr\n");
+ dev_dbg(dev->hw_dev, "Board model (probed, not recommended): das-1802hr\n");
return das1802hr;
break;
case 0x7:
if (board == das1801st || board == das1802st ||
board == das1701st || board == das1702st) {
- printk(" Board model: %s\n",
- das1800_boards[board].name);
+ dev_dbg(dev->hw_dev, "Board model: %s\n",
+ das1800_boards[board].name);
return board;
}
- printk
- (" Board model (probed, not recommended): das-1800st series\n");
+ dev_dbg(dev->hw_dev, "Board model (probed, not recommended): das-1800st series\n");
return das1801st;
break;
case 0x8:
if (board == das1801hc || board == das1802hc) {
- printk(" Board model: %s\n",
- das1800_boards[board].name);
+ dev_dbg(dev->hw_dev, "Board model: %s\n",
+ das1800_boards[board].name);
return board;
}
- printk
- (" Board model (probed, not recommended): das-1800hc series\n");
+ dev_dbg(dev->hw_dev, "Board model (probed, not recommended): das-1800hc series\n");
return das1801hc;
break;
default:
- printk
- (" Board model: probe returned 0x%x (unknown, please report)\n",
- id);
+ dev_dbg(dev->hw_dev, "Board model: probe returned 0x%x (unknown, please report)\n",
+ id);
return board;
break;
}
--
1.7.6.4
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH 23/24] Staging: comedi: fix printk issue in adv_pci1710.c
2011-10-19 12:04 [PATCH 21/24] Staging: comedi: fix warning issue in cb_das16_cs.c Ravishankar Karkala Mallikarjunayya
2011-10-19 12:04 ` [PATCH 22/24] Staging: comedi: fix printk issue in das1800.c Ravishankar Karkala Mallikarjunayya
@ 2011-10-19 12:04 ` Ravishankar Karkala Mallikarjunayya
2011-10-19 12:04 ` [PATCH 24/24] Staging: comedi: fix code cleanup in daqboard2000.c Ravishankar Karkala Mallikarjunayya
2011-10-19 20:06 ` [PATCH 21/24] Staging: comedi: fix warning issue in cb_das16_cs.c Greg KH
3 siblings, 0 replies; 6+ messages in thread
From: Ravishankar Karkala Mallikarjunayya @ 2011-10-19 12:04 UTC (permalink / raw)
To: gregkh, wfp5p; +Cc: devel, linux-kernel, Ravishankar Karkala Mallikarjunayya
This is a patch to the adv_pci1710.c file that fixes up a printk
warning found by the checkpatch.pl tool
Converted printks to dev_printk.
Removed unnecessary printk statements.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
---
drivers/staging/comedi/drivers/adv_pci1710.c | 31 +++++++++----------------
1 files changed, 11 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index da2b75b..b6efb85 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -1382,16 +1382,12 @@ static int pci1710_attach(struct comedi_device *dev,
int i;
int board_index;
- printk("comedi%d: adv_pci1710: ", dev->minor);
-
opt_bus = it->options[0];
opt_slot = it->options[1];
ret = alloc_private(dev, sizeof(struct pci1710_private));
- if (ret < 0) {
- printk(" - Allocation failed!\n");
+ if (ret < 0)
return -ENOMEM;
- }
/* Look for matching PCI device */
errstr = "not found!";
@@ -1436,10 +1432,10 @@ static int pci1710_attach(struct comedi_device *dev,
if (!pcidev) {
if (opt_bus || opt_slot) {
- printk(" - Card at b:s %d:%d %s\n",
- opt_bus, opt_slot, errstr);
+ dev_dbg(dev->hw_dev, "Card at b:s %d:%d %s\n",
+ opt_bus, opt_slot, errstr);
} else {
- printk(" - Card %s\n", errstr);
+ dev_dbg(dev->hw_dev, "Card %s\n", errstr);
}
return -EIO;
}
@@ -1450,8 +1446,8 @@ static int pci1710_attach(struct comedi_device *dev,
irq = pcidev->irq;
iobase = pci_resource_start(pcidev, 2);
- printk(", b:s:f=%d:%d:%d, io=0x%4lx", pci_bus, pci_slot, pci_func,
- iobase);
+ dev_dbg(dev->hw_dev, "b:s:f=%d:%d:%d, io=0x%4lx", pci_bus, pci_slot,
+ pci_func, iobase);
dev->iobase = iobase;
@@ -1471,10 +1467,8 @@ static int pci1710_attach(struct comedi_device *dev,
n_subdevices++;
ret = alloc_subdevices(dev, n_subdevices);
- if (ret < 0) {
- printk(" - Allocation failed!\n");
+ if (ret < 0)
return ret;
- }
pci1710_reset(dev);
@@ -1483,15 +1477,14 @@ static int pci1710_attach(struct comedi_device *dev,
if (request_irq(irq, interrupt_service_pci1710,
IRQF_SHARED, "Advantech PCI-1710",
dev)) {
- printk
- (", unable to allocate IRQ %d, DISABLING IT",
- irq);
+ dev_dbg(dev->hw_dev, "unable to allocate IRQ %d, DISABLING IT\n",
+ irq);
irq = 0; /* Can't use IRQ */
} else {
- printk(", irq=%u", irq);
+ dev_dbg(dev->hw_dev, "irq=%u\n", irq);
}
} else {
- printk(", IRQ disabled");
+ dev_dbg(dev->hw_dev, "IRQ disabled\n");
}
} else {
irq = 0;
@@ -1499,8 +1492,6 @@ static int pci1710_attach(struct comedi_device *dev,
dev->irq = irq;
- printk(".\n");
-
subdev = 0;
if (this_board->n_aichan) {
--
1.7.6.4
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH 24/24] Staging: comedi: fix code cleanup in daqboard2000.c
2011-10-19 12:04 [PATCH 21/24] Staging: comedi: fix warning issue in cb_das16_cs.c Ravishankar Karkala Mallikarjunayya
2011-10-19 12:04 ` [PATCH 22/24] Staging: comedi: fix printk issue in das1800.c Ravishankar Karkala Mallikarjunayya
2011-10-19 12:04 ` [PATCH 23/24] Staging: comedi: fix printk issue in adv_pci1710.c Ravishankar Karkala Mallikarjunayya
@ 2011-10-19 12:04 ` Ravishankar Karkala Mallikarjunayya
2011-10-19 20:06 ` [PATCH 21/24] Staging: comedi: fix warning issue in cb_das16_cs.c Greg KH
3 siblings, 0 replies; 6+ messages in thread
From: Ravishankar Karkala Mallikarjunayya @ 2011-10-19 12:04 UTC (permalink / raw)
To: gregkh, wfp5p; +Cc: devel, linux-kernel, Ravishankar Karkala Mallikarjunayya
This is a patch to the daqboard2000.c file that fixes up a
warning found by the checkpatch.pl tool.
Converted function name to "%s", __func__.
Converted printks to dev_printk.
Fixed brace coding style issue.
Removed unnecessary printk statements.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
---
drivers/staging/comedi/drivers/daqboard2000.c | 74 +++++++++----------------
1 files changed, 26 insertions(+), 48 deletions(-)
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index 82be77d..43a2007 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -430,16 +430,14 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
/* Enable reading from the scanlist FIFO */
fpga->acqControl = DAQBOARD2000_SeqStartScanList;
for (timeout = 0; timeout < 20; timeout++) {
- if (fpga->acqControl & DAQBOARD2000_AcqConfigPipeFull) {
+ if (fpga->acqControl & DAQBOARD2000_AcqConfigPipeFull)
break;
- }
/* udelay(2); */
}
fpga->acqControl = DAQBOARD2000_AdcPacerEnable;
for (timeout = 0; timeout < 20; timeout++) {
- if (fpga->acqControl & DAQBOARD2000_AcqLogicScanning) {
+ if (fpga->acqControl & DAQBOARD2000_AcqLogicScanning)
break;
- }
/* udelay(2); */
}
for (timeout = 0; timeout < 20; timeout++) {
@@ -465,9 +463,8 @@ static int daqboard2000_ao_insn_read(struct comedi_device *dev,
int i;
int chan = CR_CHAN(insn->chanspec);
- for (i = 0; i < insn->n; i++) {
+ for (i = 0; i < insn->n; i++)
data[i] = devpriv->ao_readback[chan];
- }
return i;
}
@@ -490,9 +487,8 @@ static int daqboard2000_ao_insn_write(struct comedi_device *dev,
/* fpga->dacControl = (chan + 2) * 0x0010 | 0x0001; udelay(1000); */
fpga->dacSetting[chan] = data[i];
for (timeout = 0; timeout < 20; timeout++) {
- if ((fpga->dacControl & ((chan + 1) * 0x0010)) == 0) {
+ if ((fpga->dacControl & ((chan + 1) * 0x0010)) == 0)
break;
- }
/* udelay(2); */
}
devpriv->ao_readback[chan] = data[i];
@@ -507,7 +503,7 @@ static int daqboard2000_ao_insn_write(struct comedi_device *dev,
static void daqboard2000_resetLocalBus(struct comedi_device *dev)
{
- printk("daqboard2000_resetLocalBus\n");
+ dev_dbg(dev->hw_dev, "%s\n", __func__);
writel(DAQBOARD2000_SECRLocalBusHi, devpriv->plx + 0x6c);
udelay(10000);
writel(DAQBOARD2000_SECRLocalBusLo, devpriv->plx + 0x6c);
@@ -516,7 +512,7 @@ static void daqboard2000_resetLocalBus(struct comedi_device *dev)
static void daqboard2000_reloadPLX(struct comedi_device *dev)
{
- printk("daqboard2000_reloadPLX\n");
+ dev_dbg(dev->hw_dev, "%s\n", __func__);
writel(DAQBOARD2000_SECRReloadLo, devpriv->plx + 0x6c);
udelay(10000);
writel(DAQBOARD2000_SECRReloadHi, devpriv->plx + 0x6c);
@@ -527,7 +523,7 @@ static void daqboard2000_reloadPLX(struct comedi_device *dev)
static void daqboard2000_pulseProgPin(struct comedi_device *dev)
{
- printk("daqboard2000_pulseProgPin 1\n");
+ dev_dbg(dev->hw_dev, "%s\n", __func__);
writel(DAQBOARD2000_SECRProgPinHi, devpriv->plx + 0x6c);
udelay(10000);
writel(DAQBOARD2000_SECRProgPinLo, devpriv->plx + 0x6c);
@@ -578,17 +574,12 @@ static int initialize_daqboard2000(struct comedi_device *dev,
/* Check to make sure the serial eeprom is present on the board */
secr = readl(devpriv->plx + 0x6c);
if (!(secr & DAQBOARD2000_EEPROM_PRESENT)) {
-#ifdef DEBUG_EEPROM
- printk("no serial eeprom\n");
-#endif
+ dev_dbg(dev->hw_dev, "no serial eeprom\n");
return -EIO;
}
for (retry = 0; retry < 3; retry++) {
-#ifdef DEBUG_EEPROM
- printk("Programming EEPROM try %x\n", retry);
-#endif
-
+ dev_dbg(dev->hw_dev, "Programming EEPROM try %x\n", retry);
daqboard2000_resetLocalBus(dev);
daqboard2000_reloadPLX(dev);
daqboard2000_pulseProgPin(dev);
@@ -596,23 +587,19 @@ static int initialize_daqboard2000(struct comedi_device *dev,
for (i = 0; i < len; i++) {
if (cpld_array[i] == 0xff
&& cpld_array[i + 1] == 0x20) {
-#ifdef DEBUG_EEPROM
- printk("Preamble found at %d\n", i);
-#endif
+ dev_dbg(dev->hw_dev, "Preamble found at %d\n",
+ i);
break;
}
}
for (; i < len; i += 2) {
int data =
(cpld_array[i] << 8) + cpld_array[i + 1];
- if (!daqboard2000_writeCPLD(dev, data)) {
+ if (!daqboard2000_writeCPLD(dev, data))
break;
- }
}
if (i >= len) {
-#ifdef DEBUG_EEPROM
- printk("Programmed\n");
-#endif
+ dev_dbg(dev->hw_dev, "Programmed\n");
daqboard2000_resetLocalBus(dev);
daqboard2000_reloadPLX(dev);
result = 0;
@@ -658,9 +645,8 @@ static void daqboard2000_activateReferenceDacs(struct comedi_device *dev)
/* Set the + reference dac value in the FPGA */
fpga->refDacs = 0x80 | DAQBOARD2000_PosRefDacSelect;
for (timeout = 0; timeout < 20; timeout++) {
- if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0) {
+ if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0)
break;
- }
udelay(2);
}
/* printk("DAQBOARD2000_PosRefDacSelect %d\n", timeout);*/
@@ -668,9 +654,8 @@ static void daqboard2000_activateReferenceDacs(struct comedi_device *dev)
/* Set the - reference dac value in the FPGA */
fpga->refDacs = 0x80 | DAQBOARD2000_NegRefDacSelect;
for (timeout = 0; timeout < 20; timeout++) {
- if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0) {
+ if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0)
break;
- }
udelay(2);
}
/* printk("DAQBOARD2000_NegRefDacSelect %d\n", timeout);*/
@@ -737,15 +722,12 @@ static int daqboard2000_attach(struct comedi_device *dev,
unsigned int aux_len;
int bus, slot;
- printk("comedi%d: daqboard2000:", dev->minor);
-
bus = it->options[0];
slot = it->options[1];
result = alloc_private(dev, sizeof(struct daqboard2000_private));
- if (result < 0) {
+ if (result < 0)
return -ENOMEM;
- }
for (card = pci_get_device(0x1616, 0x0409, NULL);
card != NULL; card = pci_get_device(0x1616, 0x0409, card)) {
if (bus || slot) {
@@ -759,10 +741,10 @@ static int daqboard2000_attach(struct comedi_device *dev,
}
if (!card) {
if (bus || slot)
- printk(" no daqboard2000 found at bus/slot: %d/%d\n",
- bus, slot);
+ dev_dbg(dev->hw_dev, "no daqboard2000 found at bus/slot: %d/%d\n",
+ bus, slot);
else
- printk(" no daqboard2000 found\n");
+ dev_dbg(dev->hw_dev, "no daqboard2000 found\n");
return -EIO;
} else {
u32 id;
@@ -772,7 +754,8 @@ static int daqboard2000_attach(struct comedi_device *dev,
subsystem_device << 16) | card->subsystem_vendor;
for (i = 0; i < n_boardtypes; i++) {
if (boardtypes[i].id == id) {
- printk(" %s", boardtypes[i].name);
+ dev_dbg(dev->hw_dev, "%s\n",
+ boardtypes[i].name);
dev->board_ptr = boardtypes + i;
}
}
@@ -786,7 +769,7 @@ static int daqboard2000_attach(struct comedi_device *dev,
result = comedi_pci_enable(card, "daqboard2000");
if (result < 0) {
- printk(" failed to enable PCI device and request regions\n");
+ dev_err(dev->hw_dev, "failed to enable PCI device and request regions\n");
return -EIO;
}
devpriv->got_regions = 1;
@@ -794,9 +777,8 @@ static int daqboard2000_attach(struct comedi_device *dev,
ioremap(pci_resource_start(card, 0), DAQBOARD2000_PLX_SIZE);
devpriv->daq =
ioremap(pci_resource_start(card, 2), DAQBOARD2000_DAQ_SIZE);
- if (!devpriv->plx || !devpriv->daq) {
+ if (!devpriv->plx || !devpriv->daq)
return -ENOMEM;
- }
result = alloc_subdevices(dev, 3);
if (result < 0)
@@ -817,7 +799,7 @@ static int daqboard2000_attach(struct comedi_device *dev,
if (aux_data && aux_len) {
result = initialize_daqboard2000(dev, aux_data, aux_len);
} else {
- printk("no FPGA initialization code, aborting\n");
+ dev_dbg(dev->hw_dev, "no FPGA initialization code, aborting\n");
result = -EIO;
}
if (result < 0)
@@ -857,30 +839,26 @@ static int daqboard2000_attach(struct comedi_device *dev,
result = subdev_8255_init(dev, s, daqboard2000_8255_cb,
(unsigned long)(dev->iobase + 0x40));
- printk("\n");
out:
return result;
}
static int daqboard2000_detach(struct comedi_device *dev)
{
- printk("comedi%d: daqboard2000: remove\n", dev->minor);
if (dev->subdevices)
subdev_8255_cleanup(dev, dev->subdevices + 2);
- if (dev->irq) {
+ if (dev->irq)
free_irq(dev->irq, dev);
- }
if (devpriv) {
if (devpriv->daq)
iounmap(devpriv->daq);
if (devpriv->plx)
iounmap(devpriv->plx);
if (devpriv->pci_dev) {
- if (devpriv->got_regions) {
+ if (devpriv->got_regions)
comedi_pci_disable(devpriv->pci_dev);
- }
pci_dev_put(devpriv->pci_dev);
}
}
--
1.7.6.4
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 21/24] Staging: comedi: fix warning issue in cb_das16_cs.c
2011-10-19 12:04 [PATCH 21/24] Staging: comedi: fix warning issue in cb_das16_cs.c Ravishankar Karkala Mallikarjunayya
` (2 preceding siblings ...)
2011-10-19 12:04 ` [PATCH 24/24] Staging: comedi: fix code cleanup in daqboard2000.c Ravishankar Karkala Mallikarjunayya
@ 2011-10-19 20:06 ` Greg KH
3 siblings, 0 replies; 6+ messages in thread
From: Greg KH @ 2011-10-19 20:06 UTC (permalink / raw)
To: Ravishankar Karkala Mallikarjunayya; +Cc: gregkh, wfp5p, devel, linux-kernel
On Wed, Oct 19, 2011 at 05:34:55PM +0530, Ravishankar Karkala Mallikarjunayya wrote:
21/24? What happened to the first 20?
totally confused, so again, I've dropped these :(
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread