From: Thomas Renninger <trenn@suse.de>
To: Andi Kleen <ak@linux.intel.com>, kay.sievers@vrfy.org
Cc: "H. Peter Anvin" <hpa@zytor.com>, Dave Jones <davej@redhat.com>,
Andi Kleen <andi@firstfloor.org>,
linux-kernel@vger.kernel.org, gregkh@suse.de
Subject: [PATCH] X86: Introduce HW-Pstate scattered cpuid feature
Date: Thu, 22 Dec 2011 18:55:16 +0100 [thread overview]
Message-ID: <201112221855.17243.trenn@suse.de> (raw)
In-Reply-To: <20111222001441.GB10955@alboin.amr.corp.intel.com>
On Thursday, December 22, 2011 01:14:41 AM Andi Kleen wrote:
> > So this should be:
> >
> > 1. added to the scattered CPUID features list;
> > 2. artificially set in the AMD-specific initialization code for the
> > older CPUs.
>
> Not sure (2) is correct. As far as I understand it's actually different
> mechanisms, just implemented by the same driver.
>
> Keeping the list for old CPUs is not a big issue anyways.
>
> Agreed with (1)
This would be the hw-pstate feature patch to avoid
mainting families for autoloading, etc.
It should be in powernow-k8 then:
/* IO-Based switching */
{ X86_VENDOR_AMD, 0xf, },
/* Future models support MSR based switching and a cpuid bit for it */
{ X86_VENDOR_AMD, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_HW_PSTATE },
Something does not work and I need to re-test and dig.
I'll embed this one into the others from Andi and will resend the next days.
Thomas
---
X86: Introduce HW-Pstate scattered cpuid feature
It is rather similar to CPB (boot capability) feature
and exists since fam10h (can be looked up in AMD's BKDG).
Signed-off-by: Thomas Renninger <trenn@suse.de>
---
arch/x86/include/asm/cpufeature.h | 1 +
arch/x86/kernel/cpu/scattered.c | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index f3444f7..7a1003d 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -176,6 +176,7 @@
#define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */
#define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */
#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */
+#define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */
/* Virtualization flags: Linux defined, word 8 */
#define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index c7f64e6..addf9e8 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -40,6 +40,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
{ X86_FEATURE_EPB, CR_ECX, 3, 0x00000006, 0 },
{ X86_FEATURE_XSAVEOPT, CR_EAX, 0, 0x0000000d, 1 },
{ X86_FEATURE_CPB, CR_EDX, 9, 0x80000007, 0 },
+ { X86_FEATURE_HW_PSTATE, CR_EDX, 7, 0x80000007, 0 },
{ X86_FEATURE_NPT, CR_EDX, 0, 0x8000000a, 0 },
{ X86_FEATURE_LBRV, CR_EDX, 1, 0x8000000a, 0 },
{ X86_FEATURE_SVML, CR_EDX, 2, 0x8000000a, 0 },
next prev parent reply other threads:[~2011-12-22 17:55 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-19 23:46 CPUID based driver autoloading v3 Andi Kleen
2011-12-19 23:46 ` [PATCH 1/8] Add driver auto probing for x86 features v2 Andi Kleen
2011-12-20 1:25 ` [tip:x86/autoprobe] x86: Add driver auto probing for x86 features tip-bot for Andi Kleen
2011-12-23 13:16 ` [PATCH 1/8] Add driver auto probing for x86 features v2 Thomas Renninger
2011-12-19 23:46 ` [PATCH 2/8] crypto: Add support for x86 cpuid auto loading for x86 crypto drivers Andi Kleen
2011-12-20 1:26 ` [tip:x86/autoprobe] x86, " tip-bot for Andi Kleen
2011-12-19 23:46 ` [PATCH 3/8] intel-idle: convert to x86_cpu_id auto probing Andi Kleen
2011-12-20 1:27 ` [tip:x86/autoprobe] x86, " tip-bot for Andi Kleen
2011-12-19 23:46 ` [PATCH 4/8] ACPI: Load acpi-cpufreq from processor driver automatically Andi Kleen
2011-12-20 1:28 ` [tip:x86/autoprobe] x86, acpi: " tip-bot for Andi Kleen
2011-12-19 23:46 ` [PATCH 5/8] HWMON: Convert via-cputemp to x86 cpuid autoprobing Andi Kleen
2011-12-20 1:28 ` [tip:x86/autoprobe] x86, hwmon: " tip-bot for Andi Kleen
2011-12-19 23:46 ` [PATCH 6/8] HWMON: Convert coretemp " Andi Kleen
2011-12-20 1:29 ` [tip:x86/autoprobe] x86, hwmon: " tip-bot for Andi Kleen
2011-12-19 23:46 ` [PATCH 7/8] cpufreq: Add support for x86 cpuinfo auto loading v3 Andi Kleen
2011-12-20 1:30 ` [tip:x86/autoprobe] x86, cpufreq: Add support for x86 cpuinfo auto loading tip-bot for Andi Kleen
2011-12-20 10:12 ` Ingo Molnar
2011-12-20 18:18 ` Andi Kleen
2011-12-21 11:03 ` [PATCH 7/8] cpufreq: Add support for x86 cpuinfo auto loading v3 Thomas Renninger
2011-12-21 20:12 ` Andi Kleen
2011-12-21 20:14 ` H. Peter Anvin
2011-12-21 21:30 ` Dave Jones
2011-12-22 0:01 ` Andi Kleen
2011-12-22 0:08 ` H. Peter Anvin
2011-12-22 0:14 ` Andi Kleen
2011-12-22 15:29 ` Thomas Renninger
2011-12-22 20:49 ` Andi Kleen
2011-12-22 17:55 ` Thomas Renninger [this message]
2011-12-19 23:46 ` [PATCH 8/8] x86: autoload microcode driver on Intel and AMD systems Andi Kleen
2011-12-20 1:31 ` [tip:x86/autoprobe] x86: Autoload " tip-bot for Andi Kleen
2011-12-21 15:02 ` [PATCH 9/8] CPU: Introduce ARCH_HAS_CPU_AUTOPROBE and X86 parts Thomas Renninger
2011-12-21 15:32 ` Kay Sievers
2011-12-21 23:29 ` Greg KH
2011-12-21 23:36 ` H. Peter Anvin
2011-12-21 23:46 ` Kay Sievers
2011-12-21 23:50 ` H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201112221855.17243.trenn@suse.de \
--to=trenn@suse.de \
--cc=ak@linux.intel.com \
--cc=andi@firstfloor.org \
--cc=davej@redhat.com \
--cc=gregkh@suse.de \
--cc=hpa@zytor.com \
--cc=kay.sievers@vrfy.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome