From: Kees Cook <keescook@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: Darren Hart <dvhart@linux.intel.com>,
Thomas Gleixner <tglx@linutronix.de>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
Andrew Morton <akpm@linux-foundation.org>,
Jiri Kosina <jkosina@suse.cz>,
"Eric W. Biederman" <ebiederm@xmission.com>,
David Howells <dhowells@redhat.com>,
"Serge E. Hallyn" <serge.hallyn@canonical.com>,
kernel-hardening@lists.openwall.com, spender@grsecurity.net
Subject: [PATCH] futex: do not leak robust list to unprivileged process
Date: Mon, 19 Mar 2012 16:12:53 -0700 [thread overview]
Message-ID: <20120319231253.GA20893@www.outflux.net> (raw)
It was possible to extract the robust list head address from a setuid
process if it had used set_robust_list(), allowing an ASLR info leak. This
changes the permission checks to be the same as those used for similar
info that comes out of /proc.
Running a setuid program that uses robust futexes would have had:
cred->euid != pcred->euid
cred->euid == pcred->uid
so the old permissions check would allow it. I'm not aware of any setuid
programs that use robust futexes, so this is just a preventative measure.
(This patch is based on changes from grsecurity.)
Signed-off-by: Kees Cook <keescook@chromium.org>
---
kernel/futex.c | 36 +++++++++++++-----------------------
kernel/futex_compat.c | 36 +++++++++++++-----------------------
2 files changed, 26 insertions(+), 46 deletions(-)
diff --git a/kernel/futex.c b/kernel/futex.c
index 1614be2..439440d 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -59,6 +59,7 @@
#include <linux/magic.h>
#include <linux/pid.h>
#include <linux/nsproxy.h>
+#include <linux/ptrace.h>
#include <asm/futex.h>
@@ -2443,40 +2444,29 @@ SYSCALL_DEFINE3(get_robust_list, int, pid,
{
struct robust_list_head __user *head;
unsigned long ret;
- const struct cred *cred = current_cred(), *pcred;
+ struct task_struct *p;
if (!futex_cmpxchg_enabled)
return -ENOSYS;
+ rcu_read_lock();
+
+ ret = -ESRCH;
if (!pid)
- head = current->robust_list;
+ p = current;
else {
- struct task_struct *p;
-
- ret = -ESRCH;
- rcu_read_lock();
p = find_task_by_vpid(pid);
if (!p)
goto err_unlock;
- ret = -EPERM;
- pcred = __task_cred(p);
- /* If victim is in different user_ns, then uids are not
- comparable, so we must have CAP_SYS_PTRACE */
- if (cred->user->user_ns != pcred->user->user_ns) {
- if (!ns_capable(pcred->user->user_ns, CAP_SYS_PTRACE))
- goto err_unlock;
- goto ok;
- }
- /* If victim is in same user_ns, then uids are comparable */
- if (cred->euid != pcred->euid &&
- cred->euid != pcred->uid &&
- !ns_capable(pcred->user->user_ns, CAP_SYS_PTRACE))
- goto err_unlock;
-ok:
- head = p->robust_list;
- rcu_read_unlock();
}
+ ret = -EPERM;
+ if (!ptrace_may_access(p, PTRACE_MODE_READ))
+ goto err_unlock;
+
+ head = p->robust_list;
+ rcu_read_unlock();
+
if (put_user(sizeof(*head), len_ptr))
return -EFAULT;
return put_user(head, head_ptr);
diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c
index 5f9e689..a9642d5 100644
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -10,6 +10,7 @@
#include <linux/compat.h>
#include <linux/nsproxy.h>
#include <linux/futex.h>
+#include <linux/ptrace.h>
#include <asm/uaccess.h>
@@ -136,40 +137,29 @@ compat_sys_get_robust_list(int pid, compat_uptr_t __user *head_ptr,
{
struct compat_robust_list_head __user *head;
unsigned long ret;
- const struct cred *cred = current_cred(), *pcred;
+ struct task_struct *p;
if (!futex_cmpxchg_enabled)
return -ENOSYS;
+ rcu_read_lock();
+
+ ret = -ESRCH;
if (!pid)
- head = current->compat_robust_list;
+ p = current;
else {
- struct task_struct *p;
-
- ret = -ESRCH;
- rcu_read_lock();
p = find_task_by_vpid(pid);
if (!p)
goto err_unlock;
- ret = -EPERM;
- pcred = __task_cred(p);
- /* If victim is in different user_ns, then uids are not
- comparable, so we must have CAP_SYS_PTRACE */
- if (cred->user->user_ns != pcred->user->user_ns) {
- if (!ns_capable(pcred->user->user_ns, CAP_SYS_PTRACE))
- goto err_unlock;
- goto ok;
- }
- /* If victim is in same user_ns, then uids are comparable */
- if (cred->euid != pcred->euid &&
- cred->euid != pcred->uid &&
- !ns_capable(pcred->user->user_ns, CAP_SYS_PTRACE))
- goto err_unlock;
-ok:
- head = p->compat_robust_list;
- rcu_read_unlock();
}
+ ret = -EPERM;
+ if (!ptrace_may_access(p, PTRACE_MODE_READ))
+ goto err_unlock;
+
+ head = p->compat_robust_list;
+ rcu_read_unlock();
+
if (put_user(sizeof(*head), len_ptr))
return -EFAULT;
return put_user(ptr_to_compat(head), head_ptr);
--
1.7.0.4
next reply other threads:[~2012-03-19 23:31 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-19 23:12 Kees Cook [this message]
2012-03-20 13:31 ` Serge Hallyn
2012-03-20 17:02 ` Thomas Gleixner
2012-03-20 17:11 ` Kees Cook
2012-03-20 17:23 ` Ingo Molnar
2012-03-22 23:46 ` Thomas Gleixner
2012-03-23 17:58 ` [PATCH] futex: mark get_robust_list as deprecated Kees Cook
2012-03-23 18:27 ` Thomas Gleixner
2012-03-23 19:08 ` Kees Cook
2012-03-23 19:08 ` [PATCH v2] " Kees Cook
2012-03-23 22:06 ` Eric W. Biederman
2012-03-23 22:10 ` Kees Cook
2012-03-30 5:05 ` Matt Helsley
2012-03-30 6:14 ` Pavel Emelyanov
2012-03-30 22:51 ` Gene Cooperman
2012-03-27 18:05 ` Josh Boyer
2012-03-27 19:13 ` Peter Zijlstra
2012-03-29 9:56 ` [tip:core/locking] futex: Mark " tip-bot for Kees Cook
2012-08-02 10:35 ` [PATCH v2] futex: mark " richard -rw- weinberger
2012-08-02 11:11 ` Eric W. Biederman
2012-08-03 10:17 ` richard -rw- weinberger
2012-08-03 11:02 ` Cyrill Gorcunov
2012-08-03 11:19 ` richard -rw- weinberger
2012-08-03 11:27 ` Cyrill Gorcunov
2012-08-03 11:30 ` richard -rw- weinberger
2012-08-03 11:35 ` Cyrill Gorcunov
2012-08-03 11:38 ` richard -rw- weinberger
2012-08-03 12:38 ` Pavel Emelyanov
2012-08-03 12:58 ` Eric W. Biederman
2012-08-03 13:00 ` richard -rw- weinberger
2012-08-03 17:16 ` Kees Cook
2012-03-28 18:33 ` [PATCH] futex: do not leak robust list to unprivileged process Kees Cook
2012-03-28 21:24 ` Thomas Gleixner
2012-03-29 9:55 ` [tip:core/locking] futex: Do " tip-bot for Kees Cook
2012-06-19 1:41 ` Wanlong Gao
2012-06-19 2:24 ` Serge Hallyn
2012-06-19 2:32 ` Wanlong Gao
2012-06-19 3:13 ` Serge Hallyn
2012-06-19 3:21 ` Wanlong Gao
2012-06-19 12:23 ` Serge Hallyn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120319231253.GA20893@www.outflux.net \
--to=keescook@chromium.org \
--cc=a.p.zijlstra@chello.nl \
--cc=akpm@linux-foundation.org \
--cc=dhowells@redhat.com \
--cc=dvhart@linux.intel.com \
--cc=ebiederm@xmission.com \
--cc=jkosina@suse.cz \
--cc=kernel-hardening@lists.openwall.com \
--cc=linux-kernel@vger.kernel.org \
--cc=serge.hallyn@canonical.com \
--cc=spender@grsecurity.net \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®