[ 000/135] 3.2.30-stable review

[ 000/135] 3.2.30-stable review

[Ben Hutchings]

This is the start of the stable review cycle for the 3.2.30 release.
There are 135 patches in this series, which will be posted as responses
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed Sep 19 01:00:00 UTC 2012.
Anything received after that time might be too late.

A combined patch relative to 3.2.29 will be posted as an additional
response to this, and the diffstat can be found below.

Ben.

-------------
 .../devicetree/bindings/mmc/fsl-imx-esdhc.txt      |    8 +-
 Documentation/i2c/busses/i2c-i801                  |    2 +
 Makefile                                           |    4 +-
 arch/arm/Kconfig                                   |    1 +
 arch/arm/Makefile                                  |    4 +-
 arch/arm/boot/dts/imx51-babbage.dts                |    4 +-
 arch/arm/include/asm/pgtable.h                     |   34 ++---
 arch/arm/kernel/hw_breakpoint.c                    |   55 ++++++--
 arch/arm/kernel/traps.c                            |   11 +-
 arch/arm/mach-dove/common.c                        |    2 +-
 arch/arm/mach-imx/hotplug.c                        |   23 +--
 arch/arm/mach-kirkwood/common.c                    |    4 +-
 arch/arm/mach-mv78xx0/common.c                     |    6 +-
 arch/arm/mach-orion5x/common.c                     |    3 +-
 arch/arm/mm/flush.c                                |    2 -
 arch/arm/plat-omap/dmtimer.c                       |    2 +-
 arch/arm/plat-orion/common.c                       |    8 +-
 arch/arm/plat-orion/include/plat/common.h          |    6 +-
 arch/arm/plat-s3c24xx/dma.c                        |    2 +-
 arch/parisc/include/asm/atomic.h                   |    4 +-
 arch/powerpc/kernel/asm-offsets.c                  |    1 +
 arch/powerpc/kernel/dbell.c                        |    2 +
 arch/powerpc/kernel/entry_64.S                     |   23 ++-
 arch/powerpc/kernel/process.c                      |   12 +-
 arch/powerpc/kernel/smp.c                          |   11 +-
 arch/powerpc/kernel/sysfs.c                        |   10 ++
 arch/powerpc/kernel/traps.c                        |    3 +-
 arch/powerpc/sysdev/xics/icp-hv.c                  |   42 ++++--
 arch/x86/xen/setup.c                               |    9 +-
 drivers/ata/ahci.c                                 |    2 +
 drivers/gpu/drm/drm_crtc.c                         |   19 +--
 drivers/gpu/drm/drm_edid.c                         |   25 +++-
 drivers/gpu/drm/i915/i915_irq.c                    |   20 ++-
 drivers/gpu/drm/i915/i915_reg.h                    |   10 +-
 drivers/gpu/drm/i915/intel_display.c               |   41 ++----
 drivers/gpu/drm/i915/intel_lvds.c                  |    4 +-
 drivers/gpu/drm/i915/intel_sdvo.c                  |   30 ++--
 drivers/gpu/drm/nouveau/nouveau_display.c          |    2 +-
 drivers/gpu/drm/radeon/atombios_crtc.c             |  146 +++++++++++++++++---
 drivers/gpu/drm/radeon/atombios_encoders.c         |  105 +++++++-------
 drivers/gpu/drm/radeon/radeon_device.c             |    2 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c                |    6 +
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.h                |   10 ++
 drivers/gpu/drm/vmwgfx/vmwgfx_resource.c           |   73 ++++++++++
 drivers/hid/Kconfig                                |    1 +
 drivers/hid/hid-core.c                             |    3 +
 drivers/hid/hid-ids.h                              |    5 +
 drivers/hid/hid-multitouch.c                       |   15 ++
 drivers/hid/usbhid/hid-quirks.c                    |    4 +
 drivers/hwmon/asus_atk0110.c                       |    6 +
 drivers/hwmon/twl4030-madc-hwmon.c                 |    9 +-
 drivers/i2c/busses/Kconfig                         |    7 +
 drivers/i2c/busses/Makefile                        |    5 +-
 drivers/i2c/busses/i2c-designware-core.c           |   11 ++
 drivers/i2c/busses/i2c-i801.c                      |    6 +
 drivers/input/serio/i8042-x86ia64io.h              |   14 ++
 drivers/isdn/isdnloop/isdnloop.c                   |   12 --
 drivers/mmc/card/block.c                           |   27 +++-
 drivers/mmc/host/mxs-mmc.c                         |   12 +-
 drivers/mmc/host/sdhci-esdhc.h                     |    6 +-
 drivers/mtd/ubi/vtbl.c                             |    4 +-
 drivers/net/can/mcp251x.c                          |   11 +-
 drivers/net/ethernet/freescale/gianfar.c           |    2 +-
 drivers/net/ethernet/ibm/ibmveth.c                 |   26 ++--
 drivers/net/ethernet/intel/e1000e/e1000.h          |    1 +
 drivers/net/ethernet/intel/e1000e/netdev.c         |   49 +++----
 drivers/net/ethernet/sfc/efx.c                     |    6 +
 drivers/net/ethernet/sfc/efx.h                     |   14 +-
 drivers/net/ethernet/sfc/ethtool.c                 |   16 ++-
 drivers/net/ethernet/sfc/nic.h                     |    3 +
 drivers/net/ethernet/sfc/tx.c                      |   19 +++
 drivers/net/ppp/pptp.c                             |    4 +-
 drivers/net/wireless/iwlwifi/iwl-debugfs.c         |    3 +
 drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h  |    2 +-
 drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c   |    2 +-
 drivers/net/wireless/iwlwifi/iwl-trans-pcie.c      |   30 ++--
 drivers/net/wireless/rt2x00/rt2400pci.c            |    9 ++
 drivers/net/wireless/rt2x00/rt2400pci.h            |    1 +
 drivers/net/wireless/rt2x00/rt2500pci.c            |    9 ++
 drivers/net/wireless/rt2x00/rt2500usb.c            |   11 +-
 drivers/net/wireless/rt2x00/rt2500usb.h            |   17 +--
 drivers/net/wireless/rt2x00/rt2800pci.c            |    9 ++
 drivers/net/wireless/rt2x00/rt2800usb.c            |   22 ++-
 drivers/net/wireless/rt2x00/rt2x00dev.c            |    2 +-
 drivers/net/wireless/rt2x00/rt61pci.c              |    9 ++
 drivers/net/wireless/rt2x00/rt61pci.h              |    1 +
 drivers/net/wireless/rt2x00/rt73usb.c              |    9 ++
 drivers/net/wireless/rt2x00/rt73usb.h              |    3 +
 drivers/scsi/megaraid/megaraid_sas_base.c          |    3 +-
 drivers/scsi/mpt2sas/mpt2sas_base.c                |   13 +-
 drivers/scsi/scsi_error.c                          |   10 ++
 drivers/scsi/scsi_scan.c                           |   10 ++
 drivers/staging/comedi/drivers/das08.c             |    4 +-
 drivers/staging/rtl8712/recv_linux.c               |    7 +-
 drivers/staging/vt6656/dpc.c                       |    2 +-
 drivers/staging/vt6656/rxtx.c                      |   38 ++---
 drivers/staging/zcache/zcache-main.c               |    7 +-
 drivers/tty/serial/imx.c                           |   30 ++--
 drivers/usb/core/quirks.c                          |    4 +
 drivers/usb/host/ehci-q.c                          |   12 +-
 drivers/usb/host/pci-quirks.c                      |   49 ++++++-
 drivers/usb/host/pci-quirks.h                      |    2 +
 drivers/usb/host/xhci-hub.c                        |   42 ++++++
 drivers/usb/host/xhci-pci.c                        |    9 ++
 drivers/usb/host/xhci-ring.c                       |   39 ++++--
 drivers/usb/host/xhci.c                            |  124 +++++++++++++++++
 drivers/usb/host/xhci.h                            |    7 +
 drivers/usb/serial/ftdi_sio.c                      |   22 ++-
 drivers/usb/serial/ftdi_sio_ids.h                  |   29 +++-
 drivers/usb/serial/option.c                        |    4 +
 drivers/video/omap2/omapfb/omapfb-main.c           |    2 +-
 drivers/xen/swiotlb-xen.c                          |    2 +-
 fs/cifs/file.c                                     |    2 +-
 fs/ecryptfs/inode.c                                |    5 +
 fs/ext3/inode.c                                    |   17 ++-
 fs/fuse/dev.c                                      |    1 +
 fs/nfs/inode.c                                     |    2 +-
 fs/nfs/nfs3proc.c                                  |    2 +-
 fs/nfs/nfs4proc.c                                  |    4 +-
 fs/nfs/nfs4xdr.c                                   |   11 +-
 fs/nfs/super.c                                     |    2 +
 fs/stat.c                                          |    5 +-
 fs/udf/file.c                                      |   35 ++++-
 include/drm/drm_mode.h                             |    5 +-
 include/linux/kobject.h                            |    2 +-
 include/linux/ktime.h                              |    7 -
 include/linux/mmc/card.h                           |    1 +
 include/linux/mv643xx_eth.h                        |    2 +
 include/linux/netdevice.h                          |    4 +
 include/linux/nfs_fs.h                             |    5 -
 include/linux/pci_ids.h                            |    2 +-
 include/linux/perf_event.h                         |    2 +-
 include/linux/sunrpc/xprt.h                        |    3 +
 include/linux/time.h                               |   29 +++-
 include/net/scm.h                                  |    4 +-
 include/net/sock.h                                 |    2 +
 kernel/events/core.c                               |   62 +++++----
 kernel/time/timekeeping.c                          |   32 ++++-
 kernel/workqueue.c                                 |    9 +-
 mm/mempolicy.c                                     |    2 +-
 net/atm/common.c                                   |    1 +
 net/atm/pvc.c                                      |    1 +
 net/bluetooth/hci_sock.c                           |    2 +
 net/bluetooth/l2cap_sock.c                         |    1 +
 net/bluetooth/rfcomm/sock.c                        |    2 +
 net/bluetooth/rfcomm/tty.c                         |    2 +-
 net/core/dev.c                                     |   27 +++-
 net/core/sock.c                                    |    1 +
 net/dccp/ccids/ccid3.c                             |    1 +
 net/ipv4/ipmr.c                                    |   14 +-
 net/ipv4/tcp.c                                     |    4 +-
 net/ipv4/tcp_cong.c                                |    3 +-
 net/ipv4/tcp_output.c                              |   21 +--
 net/ipv6/addrconf.c                                |    4 +-
 net/l2tp/l2tp_core.c                               |    3 +-
 net/l2tp/l2tp_core.h                               |    1 +
 net/llc/af_llc.c                                   |    3 +-
 net/netfilter/ipvs/ip_vs_ctl.c                     |    1 +
 net/netlink/af_netlink.c                           |    6 +-
 net/packet/af_packet.c                             |   10 +-
 net/sched/act_gact.c                               |   14 +-
 net/socket.c                                       |    1 +
 net/sunrpc/xprt.c                                  |   34 +++--
 net/sunrpc/xprtrdma/transport.c                    |    1 +
 net/sunrpc/xprtsock.c                              |    3 +
 net/unix/af_unix.c                                 |    4 +-
 sound/pci/hda/hda_codec.c                          |    2 +-
 sound/pci/ice1712/prodigy_hifi.c                   |    3 +-
 168 files changed, 1549 insertions(+), 581 deletions(-)

-- 
Ben Hutchings
The world is coming to an end.	Please log off.

[ 001/135] [PARISC] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mel Gorman <mgorman@suse.de>

commit bba3d8c3b3c0f2123be5bc687d1cddc13437c923 upstream.

The following build error occured during a parisc build with
swap-over-NFS patches applied.

net/core/sock.c:274:36: error: initializer element is not constant
net/core/sock.c:274:36: error: (near initialization for 'memalloc_socks')
net/core/sock.c:274:36: error: initializer element is not constant

Dave Anglin says:
> Here is the line in sock.i:
>
> struct static_key memalloc_socks = ((struct static_key) { .enabled =
> ((atomic_t) { (0) }) });

The above line contains two compound literals.  It also uses a designated
initializer to initialize the field enabled.  A compound literal is not a
constant expression.

The location of the above statement isn't fully clear, but if a compound
literal occurs outside the body of a function, the initializer list must
consist of constant expressions.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/parisc/include/asm/atomic.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 6c6defc..af9cf30 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -141,7 +141,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_sub_and_test(i,v)	(atomic_sub_return((i),(v)) == 0)
 
-#define ATOMIC_INIT(i)	((atomic_t) { (i) })
+#define ATOMIC_INIT(i)	{ (i) }
 
 #define smp_mb__before_atomic_dec()	smp_mb()
 #define smp_mb__after_atomic_dec()	smp_mb()
@@ -150,7 +150,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #ifdef CONFIG_64BIT
 
-#define ATOMIC64_INIT(i) ((atomic64_t) { (i) })
+#define ATOMIC64_INIT(i) { (i) }
 
 static __inline__ s64
 __atomic64_add_return(s64 i, atomic64_t *v)

[ 002/135] ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Stuebner <heiko@sntech.de>

commit b01858c7806e7e6f6121da2e51c9222fc4d21dc6 upstream.

Commit d670ac019f60 (ARM: SAMSUNG: DMA Cleanup as per sparse) changed the
prototype of the s3c2410_dma_* functions to use the enum dma_ch instead
of an generic unsigned int.

In the s3c24xx dma.c s3c2410_dma_enqueue seems to have been forgotten,
the other functions there were changed correctly.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/plat-s3c24xx/dma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 28f898f..db98e70 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
  * when necessary.
 */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);

[ 003/135] ARM: OMAP2+: Fix dmtimer set source clock failure

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jon Hunter <jon-hunter@ti.com>

commit 54f32a35f4d3a653a18a2c8c239f19ae060bd803 upstream.

Calling the dmtimer function omap_dm_timer_set_source() fails if following a
call to pm_runtime_put() to disable the timer. For example the following
sequence would fail to set the parent clock ...

	omap_dm_timer_stop(gptimer);
	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);

The following error message would be seen ...

omap_dm_timer_set_source: failed to set timer_32k_ck as parent

The problem is that, by design, pm_runtime_put() simply decrements the usage
count and returns before the timer has actually been disabled. Therefore,
setting the parent clock failed because the timer was still active when the
trying to set the parent clock. Setting a parent clock will fail if the clock
you are setting the parent of has a non-zero usage count. To ensure that this
does not fail use pm_runtime_put_sync() when disabling the timer.

Note that this will not be seen on OMAP1 devices, because these devices do
not use the clock framework for dmtimers.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/plat-omap/dmtimer.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 626ad8c..7b6689a 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
-	pm_runtime_put(&timer->pdev->dev);
+	pm_runtime_put_sync(&timer->pdev->dev);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 

[ 004/135] ARM: Orion: Set eth packet size csum offload limit

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Arnaud Patard (Rtp)" <arnaud.patard@rtp-net.org>

commit 58569aee5a1a5dcc25c34a0a2ed9a377874e6b05 upstream.

The mv643xx ethernet controller limits the packet size for the TX
checksum offloading. This patch sets this limits for Kirkwood and
Dove which have smaller limits that the default.

As a side note, this patch is an updated version of a patch sent some years
ago: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-June/017320.html
which seems to have been lost.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
[bwh: Backported to 3.2: adjust for the extra two parameters of
 orion_ge0{0,1}_init()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -92,7 +92,7 @@ void __init dove_ge00_init(struct mv643x
 {
 	orion_ge00_init(eth_data, &dove_mbus_dram_info,
 			DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM,
-			0, get_tclk());
+			0, get_tclk(), 1600);
 }
 
 /*****************************************************************************
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -88,7 +88,7 @@ void __init kirkwood_ge00_init(struct mv
 
 	orion_ge00_init(eth_data, &kirkwood_mbus_dram_info,
 			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
-			IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk);
+			IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk, 1600);
 }
 
 
@@ -102,7 +102,7 @@ void __init kirkwood_ge01_init(struct mv
 
 	orion_ge01_init(eth_data, &kirkwood_mbus_dram_info,
 			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
-			IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk);
+			IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk, 1600);
 }
 
 
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -202,7 +202,8 @@ void __init mv78xx0_ge00_init(struct mv6
 {
 	orion_ge00_init(eth_data, &mv78xx0_mbus_dram_info,
 			GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
-			IRQ_MV78XX0_GE_ERR, get_tclk());
+			IRQ_MV78XX0_GE_ERR, get_tclk(),
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
@@ -213,7 +214,8 @@ void __init mv78xx0_ge01_init(struct mv6
 {
 	orion_ge01_init(eth_data, &mv78xx0_mbus_dram_info,
 			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ, get_tclk());
+			NO_IRQ, get_tclk(),
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -95,7 +95,8 @@ void __init orion5x_eth_init(struct mv64
 {
 	orion_ge00_init(eth_data, &orion5x_mbus_dram_info,
 			ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
-			IRQ_ORION5X_ETH_ERR, orion5x_tclk);
+			IRQ_ORION5X_ETH_ERR, orion5x_tclk,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -263,10 +263,12 @@ void __init orion_ge00_init(struct mv643
 			    unsigned long mapbase,
 			    unsigned long irq,
 			    unsigned long irq_err,
-			    int tclk)
+			    int tclk,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge00_shared_data, mbus_dram_info, tclk,
 		    orion_ge00_resources, irq, &orion_ge00_shared,
 		    eth_data, &orion_ge00);
@@ -317,10 +319,12 @@ void __init orion_ge01_init(struct mv643
 			    unsigned long mapbase,
 			    unsigned long irq,
 			    unsigned long irq_err,
-			    int tclk)
+			    int tclk,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge01_shared_data, mbus_dram_info, tclk,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
 		    eth_data, &orion_ge01);
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -41,14 +41,16 @@ void __init orion_ge00_init(struct mv643
 			    unsigned long mapbase,
 			    unsigned long irq,
 			    unsigned long irq_err,
-			    int tclk);
+			    int tclk,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    struct mbus_dram_target_info *mbus_dram_info,
 			    unsigned long mapbase,
 			    unsigned long irq,
 			    unsigned long irq_err,
-			    int tclk);
+			    int tclk,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    struct mbus_dram_target_info *mbus_dram_info,
--- a/include/linux/mv643xx_eth.h
+++ b/include/linux/mv643xx_eth.h
@@ -15,6 +15,8 @@
 #define MV643XX_ETH_SIZE_REG_4		0x2224
 #define MV643XX_ETH_BASE_ADDR_ENABLE_REG	0x2290
 
+#define MV643XX_TX_CSUM_DEFAULT_LIMIT	0
+
 struct mv643xx_eth_shared_platform_data {
 	struct mbus_dram_target_info	*dram;
 	struct platform_device	*shared_smi;

[ 005/135] iwlwifi: fix flow handler debug code

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 94543a8d4fb302817014981489f15cb3b92ec3c2 upstream.

iwl_dbgfs_fh_reg_read() can cause crashes and/or
BUG_ON in slub because the ifdefs are wrong, the
code in iwl_dump_fh() should use DEBUGFS, not
DEBUG to protect the buffer writing code.

Also, while at it, clean up the arguments to the
function, some code and make it generally safer.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust filenames and context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h
@@ -303,7 +303,7 @@ int iwl_queue_space(const struct iwl_que
 ******************************************************/
 int iwl_dump_nic_event_log(struct iwl_trans *trans, bool full_log,
 			    char **buf, bool display);
-int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display);
+int iwl_dump_fh(struct iwl_trans *trans, char **buf);
 void iwl_dump_csr(struct iwl_trans *trans);
 
 /*****************************************************
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
@@ -678,7 +678,7 @@ static void iwl_irq_handle_error(struct
 
 	iwl_dump_nic_error_log(trans);
 	iwl_dump_csr(trans);
-	iwl_dump_fh(trans, NULL, false);
+	iwl_dump_fh(trans, NULL);
 	iwl_dump_nic_event_log(trans, false, NULL, false);
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (iwl_get_debug_level(trans->shrd) & IWL_DL_FW_ERRORS)
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -1541,13 +1541,9 @@ static const char *get_fh_string(int cmd
 	}
 }
 
-int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display)
+int iwl_dump_fh(struct iwl_trans *trans, char **buf)
 {
 	int i;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	int pos = 0;
-	size_t bufsz = 0;
-#endif
 	static const u32 fh_tbl[] = {
 		FH_RSCSR_CHNL0_STTS_WPTR_REG,
 		FH_RSCSR_CHNL0_RBDCB_BASE_REG,
@@ -1559,29 +1555,35 @@ int iwl_dump_fh(struct iwl_trans *trans,
 		FH_TSSR_TX_STATUS_REG,
 		FH_TSSR_TX_ERROR_REG
 	};
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (display) {
-		bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	if (buf) {
+		int pos = 0;
+		size_t bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+
 		*buf = kmalloc(bufsz, GFP_KERNEL);
 		if (!*buf)
 			return -ENOMEM;
+
 		pos += scnprintf(*buf + pos, bufsz - pos,
 				"FH register values:\n");
-		for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
+
+		for (i = 0; i < ARRAY_SIZE(fh_tbl); i++)
 			pos += scnprintf(*buf + pos, bufsz - pos,
 				"  %34s: 0X%08x\n",
 				get_fh_string(fh_tbl[i]),
 				iwl_read_direct32(bus(trans), fh_tbl[i]));
-		}
+
 		return pos;
 	}
 #endif
+
 	IWL_ERR(trans, "FH register values:\n");
-	for (i = 0; i <  ARRAY_SIZE(fh_tbl); i++) {
+	for (i = 0; i <  ARRAY_SIZE(fh_tbl); i++)
 		IWL_ERR(trans, "  %34s: 0X%08x\n",
 			get_fh_string(fh_tbl[i]),
 			iwl_read_direct32(bus(trans), fh_tbl[i]));
-	}
+
 	return 0;
 }
 
@@ -1929,11 +1931,11 @@ static ssize_t iwl_dbgfs_fh_reg_read(str
 					 size_t count, loff_t *ppos)
 {
 	struct iwl_trans *trans = file->private_data;
-	char *buf;
+	char *buf = NULL;
 	int pos = 0;
 	ssize_t ret = -EFAULT;
 
-	ret = pos = iwl_dump_fh(trans, &buf, true);
+	ret = pos = iwl_dump_fh(trans, &buf);
 	if (buf) {
 		ret = simple_read_from_buffer(user_buf,
 					      count, ppos, buf, pos);

[ 006/135] iwlwifi: protect SRAM debugfs

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 4fc79db178f0a0ede479b4713e00df2d106028b3 upstream.

If the device is not started, we can't read its
SRAM and attempting to do so will cause issues.
Protect the debugfs read.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2:
 - Adjust context
 - Pass iwl_shared not iwl_priv pointer to iwl_is_ready_rf()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -232,6 +232,9 @@ static ssize_t iwl_dbgfs_sram_read(struc
 	struct iwl_priv *priv = file->private_data;
 	size_t bufsz;
 
+	if (!iwl_is_ready_rf(priv->shrd))
+		return -EAGAIN;
+
 	/* default is to dump the entire data segment */
 	if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) {
 		priv->dbgfs_sram_offset = 0x800000;

[ 007/135] Input: i8042 - add Gigabyte T1005 series netbooks to noloop table

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

commit 7b125b94ca16b7e618c6241cb02c4c8060cea5e3 upstream.

They all define their chassis type as "Other" and therefore are not
categorized as "laptops" by the driver, which tries to perform AUX IRQ
delivery test which fails and causes touchpad not working.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42620
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/input/serio/i8042-x86ia64io.h |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 5ec774d..6918773 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -177,6 +177,20 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
+		/* Gigabyte T1005 - defines wrong chassis type ("Other") */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T1005"),
+		},
+	},
+	{
+		/* Gigabyte T1005M/P - defines wrong chassis type ("Other") */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T1005M/P"),
+		},
+	},
+	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"),

[ 008/135] [SCSI] mpt2sas: Fix for Driver oops, when loading driver with max_queue_depth command line option to a very small value

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "sreekanth.reddy@lsi.com" <sreekanth.reddy@lsi.com>

commit 338b131a3269881c7431234855c93c219b0979b6 upstream.

If the specified max_queue_depth setting is less than the
expected number of internal commands, then driver will calculate
the queue depth size to a negitive number. This negitive number
is actually a very large number because variable is unsigned
16bit integer. So, the driver will ask for a very large amount of
memory for message frames and resulting into oops as memory
allocation routines will not able to handle such a large request.

So, in order to limit this kind of oops, The driver need to set
the max_queue_depth to a scsi mid layer's can_queue value. Then
the overall message frames required for IO is minimum of either
(max_queue_depth plus internal commands) or the IOC global
credits.

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/scsi/mpt2sas/mpt2sas_base.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 9d46fcb..b25757d 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -2424,10 +2424,13 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	}
 
 	/* command line tunables  for max controller queue depth */
-	if (max_queue_depth != -1)
-		max_request_credit = (max_queue_depth < facts->RequestCredit)
-		    ? max_queue_depth : facts->RequestCredit;
-	else
+	if (max_queue_depth != -1 && max_queue_depth != 0) {
+		max_request_credit = min_t(u16, max_queue_depth +
+			ioc->hi_priority_depth + ioc->internal_depth,
+			facts->RequestCredit);
+		if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
+			max_request_credit =  MAX_HBA_QUEUE_DEPTH;
+	} else
 		max_request_credit = min_t(u16, facts->RequestCredit,
 		    MAX_HBA_QUEUE_DEPTH);
 
@@ -2502,7 +2505,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	/* set the scsi host can_queue depth
 	 * with some internal commands that could be outstanding
 	 */
-	ioc->shost->can_queue = ioc->scsiio_depth - (2);
+	ioc->shost->can_queue = ioc->scsiio_depth;
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
 	    "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));
 

[ 009/135] [SCSI] megaraid_sas: Move poll_aen_lock initializer

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kashyap Desai <Kashyap.Desai@lsi.com>

commit bd8d6dd43a77bfd2b8fef5b094b9d6095e169dee upstream.

The following patch moves the poll_aen_lock initializer from
megasas_probe_one() to megasas_init().  This prevents a crash when a user
loads the driver and tries to issue a poll() system call on the ioctl
interface with no adapters present.

Signed-off-by: Kashyap Desai <Kashyap.Desai@lsi.com>
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/scsi/megaraid/megaraid_sas_base.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index dc27598..ed38454 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -4066,7 +4066,6 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	spin_lock_init(&instance->cmd_pool_lock);
 	spin_lock_init(&instance->hba_lock);
 	spin_lock_init(&instance->completion_lock);
-	spin_lock_init(&poll_aen_lock);
 
 	mutex_init(&instance->aen_mutex);
 	mutex_init(&instance->reset_mutex);
@@ -5392,6 +5391,8 @@ static int __init megasas_init(void)
 	printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION,
 	       MEGASAS_EXT_VERSION);
 
+	spin_lock_init(&poll_aen_lock);
+
 	support_poll_for_event = 2;
 	support_device_change = 1;
 

[ 010/135] [SCSI] Fix Device not ready issue on mpt2sas

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Bottomley <JBottomley@Parallels.com>

commit 14216561e164671ce147458653b1fea06a4ada1e upstream.

This is a particularly nasty SCSI ATA Translation Layer (SATL) problem.

SAT-2 says (section 8.12.2)

        if the device is in the stopped state as the result of
        processing a START STOP UNIT command (see 9.11), then the SATL
        shall terminate the TEST UNIT READY command with CHECK CONDITION
        status with the sense key set to NOT READY and the additional
        sense code of LOGICAL UNIT NOT READY, INITIALIZING COMMAND
        REQUIRED;

mpt2sas internal SATL seems to implement this.  The result is very confusing
standby behaviour (using hdparm -y).  If you suspend a drive and then send
another command, usually it wakes up.  However, if the next command is a TEST
UNIT READY, the SATL sees that the drive is suspended and proceeds to follow
the SATL rules for this, returning NOT READY to all subsequent commands.  This
means that the ordering of TEST UNIT READY is crucial: if you send TUR and
then a command, you get a NOT READY to both back.  If you send a command and
then a TUR, you get GOOD status because the preceeding command woke the drive.

This bit us badly because

commit 85ef06d1d252f6a2e73b678591ab71caad4667bb
Author: Tejun Heo <tj@kernel.org>
Date:   Fri Jul 1 16:17:47 2011 +0200

    block: flush MEDIA_CHANGE from drivers on close(2)

Changed our ordering on TEST UNIT READY commands meaning that SATA drives
connected to an mpt2sas now suspend and refuse to wake (because the mpt2sas
SATL sees the suspend *before* the drives get awoken by the next ATA command)
resulting in lots of failed commands.

The standard is completely nuts forcing this inconsistent behaviour, but we
have to work around it.

The fix for this is twofold:

   1. Set the allow_restart flag so we wake the drive when we see it has been
      suspended

   2. Return all TEST UNIT READY status directly to the mid layer without any
      further error handling which prevents us causing error handling which
      may offline the device just because of a media check TUR.

Reported-by: Matthias Prager <linux@matthiasprager.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/scsi/scsi_error.c |   10 ++++++++++
 drivers/scsi/scsi_scan.c  |   10 ++++++++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 4a6381c..de2337f 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -42,6 +42,8 @@
 
 #include <trace/events/scsi.h>
 
+static void scsi_eh_done(struct scsi_cmnd *scmd);
+
 #define SENSE_TIMEOUT		(10*HZ)
 
 /*
@@ -241,6 +243,14 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 	if (! scsi_command_normalize_sense(scmd, &sshdr))
 		return FAILED;	/* no valid sense data */
 
+	if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
+		/*
+		 * nasty: for mid-layer issued TURs, we need to return the
+		 * actual sense data without any recovery attempt.  For eh
+		 * issued ones, we need to try to recover and interpret
+		 */
+		return SUCCESS;
+
 	if (scsi_sense_is_deferred(&sshdr))
 		return NEEDS_RETRY;
 
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 56a9379..d947ffc 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -764,6 +764,16 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 	sdev->model = (char *) (sdev->inquiry + 16);
 	sdev->rev = (char *) (sdev->inquiry + 32);
 
+	if (strncmp(sdev->vendor, "ATA     ", 8) == 0) {
+		/*
+		 * sata emulation layer device.  This is a hack to work around
+		 * the SATL power management specifications which state that
+		 * when the SATL detects the device has gone into standby
+		 * mode, it shall respond with NOT READY.
+		 */
+		sdev->allow_restart = 1;
+	}
+
 	if (*bflags & BLIST_ISROM) {
 		sdev->type = TYPE_ROM;
 		sdev->removable = 1;

[ 011/135] hwmon: (asus_atk0110) Add quirk for Asus M5A78L

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1201 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luca Tettamanti <kronos.it@gmail.com>

commit 43ca6cb28c871f2fbad10117b0648e5ae3b0f638 upstream.

The old interface is bugged and reads the wrong sensor when retrieving
the reading for the chassis fan (it reads the CPU sensor); the new
interface works fine.

Reported-by: Göran Uddeborg <goeran@uddeborg.se>
Tested-by: Göran Uddeborg <goeran@uddeborg.se>
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/hwmon/asus_atk0110.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 351d1f4..4ee5789 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -34,6 +34,12 @@ static const struct dmi_system_id __initconst atk_force_new_if[] = {
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "SABERTOOTH X58")
 		}
+	}, {
+		/* Old interface reads the same sensor for fan0 and fan1 */
+		.ident = "Asus M5A78L",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "M5A78L")
+		}
 	},
 	{ }
 };

[ 012/135] drm/i915: Fix assert_pch_hdmi_disabled to mention HDMI (not DP)

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adam Jackson <ajax@redhat.com>

commit 23c99e775d14f01ba45a5affd2fb51af4328359c upstream.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/i915/intel_display.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d775f95..3e21f3c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1096,7 +1096,7 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
 {
 	u32 val = I915_READ(reg);
 	WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
-	     "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
+	     "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
 	     reg, pipe_name(pipe));
 }
 

[ 013/135] drm/i915: fix wrong order of parameters in port checking functions

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Xu, Anhua" <anhua.xu@intel.com>

commit b70ad586162609141f0aa9eb34790f31a8954f89 upstream.

Wrong order of parameters passed-in when calling hdmi/adpa
/lvds_pipe_enabled(), 2nd and 3rd parameters are reversed.

This bug was indroduced by

commit 1519b9956eb4b4180fa3f47c73341463cdcfaa37
Author: Keith Packard <keithp@keithp.com>
Date:   Sat Aug 6 10:35:34 2011 -0700

    drm/i915: Fix PCH port pipe select in CPT disable paths

The reachable tag for this commit is v3.1-rc1-3-g1519b99

Signed-off-by: Anhua Xu <anhua.xu@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44876
Tested-by: Daniel Schroeder <sec@dschroeder.info>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/i915/intel_display.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1072,7 +1072,7 @@ static void assert_pch_hdmi_disabled(str
 				     enum pipe pipe, int reg)
 {
 	u32 val = I915_READ(reg);
-	WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
+	WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
 	     "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
 	     reg, pipe_name(pipe));
 }
@@ -1089,13 +1089,13 @@ static void assert_pch_ports_disabled(st
 
 	reg = PCH_ADPA;
 	val = I915_READ(reg);
-	WARN(adpa_pipe_enabled(dev_priv, val, pipe),
+	WARN(adpa_pipe_enabled(dev_priv, pipe, val),
 	     "PCH VGA enabled on transcoder %c, should be disabled\n",
 	     pipe_name(pipe));
 
 	reg = PCH_LVDS;
 	val = I915_READ(reg);
-	WARN(lvds_pipe_enabled(dev_priv, val, pipe),
+	WARN(lvds_pipe_enabled(dev_priv, pipe, val),
 	     "PCH LVDS enabled on transcoder %c, should be disabled\n",
 	     pipe_name(pipe));
 
@@ -1437,7 +1437,7 @@ static void disable_pch_hdmi(struct drm_
 			     enum pipe pipe, int reg)
 {
 	u32 val = I915_READ(reg);
-	if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
+	if (hdmi_pipe_enabled(dev_priv, pipe, val)) {
 		DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
 			      reg, pipe);
 		I915_WRITE(reg, val & ~PORT_ENABLE);
@@ -1459,12 +1459,12 @@ static void intel_disable_pch_ports(stru
 
 	reg = PCH_ADPA;
 	val = I915_READ(reg);
-	if (adpa_pipe_enabled(dev_priv, val, pipe))
+	if (adpa_pipe_enabled(dev_priv, pipe, val))
 		I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);
 
 	reg = PCH_LVDS;
 	val = I915_READ(reg);
-	if (lvds_pipe_enabled(dev_priv, val, pipe)) {
+	if (lvds_pipe_enabled(dev_priv, pipe, val)) {
 		DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
 		I915_WRITE(reg, val & ~LVDS_PORT_EN);
 		POSTING_READ(reg);

[ 014/135] OMAPFB: fix framebuffer console colors

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Grazvydas Ignotas <notasas@gmail.com>

commit c1c52848cef52e157468b8879fc3cae23b6f3a99 upstream.

omapfb does not currently set pseudo palette correctly for color depths
above 16bpp, making red text invisible, command like
  echo -e '\e[0;31mRED' > /dev/tty1
will display nothing on framebuffer console in 24bpp mode.
This is because temporary variable is declared incorrectly, fix it.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/video/omap2/omapfb/omapfb-main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 08ec1a7..fc671d3 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1192,7 +1192,7 @@ static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green,
 			break;
 
 		if (regno < 16) {
-			u16 pal;
+			u32 pal;
 			pal = ((red >> (16 - var->red.length)) <<
 					var->red.offset) |
 				((green >> (16 - var->green.length)) <<

[ 015/135] ARM: imx6: spin the cpu until hardware takes it down

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Guo <shawn.guo@linaro.org>

commit c944b0b9354ea06ffb0c8a7178949f1185f9f499 upstream.

Though commit 602bf40 (ARM: imx6: exit coherency when shutting down
a cpu) improves the stability of imx6q cpu hotplug a lot, there are
still hangs seen with a more stressful hotplug testing.

It's expected that once imx_enable_cpu(cpu, false) is called, the cpu
will be taken down by hardware immediately, and the code after that
will not get any chance to execute.  However, this is not always the
case from the testing.  The cpu could possibly be alive for a few
cycles before hardware actually takes it down.  So rather than letting
cpu execute some code that could cause a hang in these cycles, let's
make the cpu spin there and wait for hardware to take it down.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/mach-imx/hotplug.c |   23 +++--------------------
 1 file changed, 3 insertions(+), 20 deletions(-)

--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(vo
 	  : "cc");
 }
 
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-		"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
-	cpu_do_idle();
-	cpu_leave_lowpower();
 
-	/* We should never return from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+	/* spin here until hardware takes it down */
+	while (1)
+		;
 }
 
 int platform_cpu_disable(unsigned int cpu)

[ 016/135] ARM: dts: imx51-babbage: fix esdhc cd/wp properties

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Guo <shawn.guo@linaro.org>

commit a46d2619d7180bda12bad2bf15bbd0731dfc2dcf upstream.

The binding doc and dts use properties "fsl,{cd,wp}-internal" while
esdhc driver uses "fsl,{cd,wp}-controller".  Fix binding doc and dts
to get them match driver code.

Reported-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt |    8 ++++----
 arch/arm/boot/dts/imx51-babbage.dts                     |    4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -10,8 +10,8 @@ Required properties:
 
 Optional properties:
 - fsl,card-wired : Indicate the card is wired to host permanently
-- fsl,cd-internal : Indicate to use controller internal card detection
-- fsl,wp-internal : Indicate to use controller internal write protection
+- fsl,cd-controller : Indicate to use controller internal card detection
+- fsl,wp-controller : Indicate to use controller internal write protection
 - cd-gpios : Specify GPIOs for card detection
 - wp-gpios : Specify GPIOs for write protection
 
@@ -21,8 +21,8 @@ esdhc@70004000 {
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70004000 0x4000>;
 	interrupts = <1>;
-	fsl,cd-internal;
-	fsl,wp-internal;
+	fsl,cd-controller;
+	fsl,wp-controller;
 };
 
 esdhc@70008000 {
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -29,8 +29,8 @@
 		aips@70000000 { /* aips-1 */
 			spba@70000000 {
 				esdhc@70004000 { /* ESDHC1 */
-					fsl,cd-internal;
-					fsl,wp-internal;
+					fsl,cd-controller;
+					fsl,wp-controller;
 					status = "okay";
 				};
 

[ 017/135] xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit c96aae1f7f393387d160211f60398d58463a7e65 upstream.

When we are finished with return PFNs to the hypervisor, then
populate it back, and also mark the E820 MMIO and E820 gaps
as IDENTITY_FRAMEs, we then call P2M to set areas that can
be used for ballooning. We were off by one, and ended up
over-writting a P2M entry that most likely was an IDENTITY_FRAME.
For example:

1-1 mapping on 40000->40200
1-1 mapping on bc558->bc5ac
1-1 mapping on bc5b4->bc8c5
1-1 mapping on bc8c6->bcb7c
1-1 mapping on bcd00->100000
Released 614 pages of unused memory
Set 277889 page(s) to 1-1 mapping
Populating 40200-40466 pfn range: 614 pages added

=> here we set from 40466 up to bc559 P2M tree to be
INVALID_P2M_ENTRY. We should have done it up to bc558.

The end result is that if anybody is trying to construct
a PTE for PFN bc558 they end up with ~PAGE_PRESENT.

Reported-by-and-Tested-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/x86/xen/setup.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -78,9 +78,16 @@ static void __init xen_add_extra_mem(u64
 	memblock_x86_reserve_range(start, start + size, "XEN EXTRA");
 
 	xen_max_p2m_pfn = PFN_DOWN(start + size);
+	for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) {
+		unsigned long mfn = pfn_to_mfn(pfn);
+
+		if (WARN(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn))
+			continue;
+		WARN(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n",
+			pfn, mfn);
 
-	for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++)
 		__set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
+	}
 }
 
 static unsigned long __init xen_release_chunk(unsigned long start,

[ 018/135] ARM: imx: select CPU_FREQ_TABLE when needed

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit f637c4c9405e21f44cf0045eaf77eddd3a79ca5a upstream.

The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers,
so it needs to select that code to be built. This problem has
apparently existed since the i.MX cpufreq code was first merged
in v2.6.37.

Building IMX without CPU_FREQ_TABLE results in:

arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit':
arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr'
arch/arm/plat-mxc/built-in.o: In function `mxc_set_target':
arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target'
arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed':
arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify'
arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init':
arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo'
arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr'

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Yong Shen <yong.shen@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/Kconfig |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e91c7cd..84b5a0c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2150,6 +2150,7 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
 	tristate "CPUfreq driver for i.MX CPUs"
 	depends on ARCH_MXC && CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 

[ 019/135] drm: remove some potentially dangerous DRM_ERRORs

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jesse Barnes <jbarnes@virtuousgeek.org>

commit acb4b992d8a13728044f430b47b9199aa45993e9 upstream.

Each of these error messages can be caused by a broken or malicious
userspace wanting to spam the dmesg with useless info.  They're really
not worthy of DRM_DEBUG statements either; those are generally only
useful during bringup of new hardware or versions, and ought to be
removed before going upstream anyway.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[bwh: Backported to 3.2: s/r\./r->/ in drm_mode_addfb()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/drm_crtc.c |   19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1625,10 +1625,8 @@ int drm_mode_cursor_ioctl(struct drm_dev
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		return -EINVAL;
 
-	if (!req->flags) {
-		DRM_ERROR("no operation set\n");
+	if (!req->flags)
 		return -EINVAL;
-	}
 
 	mutex_lock(&dev->mode_config.mutex);
 	obj = drm_mode_object_find(dev, req->crtc_id, DRM_MODE_OBJECT_CRTC);
@@ -1641,7 +1639,6 @@ int drm_mode_cursor_ioctl(struct drm_dev
 
 	if (req->flags & DRM_MODE_CURSOR_BO) {
 		if (!crtc->funcs->cursor_set) {
-			DRM_ERROR("crtc does not support cursor\n");
 			ret = -ENXIO;
 			goto out;
 		}
@@ -1654,7 +1651,6 @@ int drm_mode_cursor_ioctl(struct drm_dev
 		if (crtc->funcs->cursor_move) {
 			ret = crtc->funcs->cursor_move(crtc, req->x, req->y);
 		} else {
-			DRM_ERROR("crtc does not support cursor\n");
 			ret = -EFAULT;
 			goto out;
 		}
@@ -1692,14 +1688,11 @@ int drm_mode_addfb(struct drm_device *de
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		return -EINVAL;
 
-	if ((config->min_width > r->width) || (r->width > config->max_width)) {
-		DRM_ERROR("mode new framebuffer width not within limits\n");
+	if ((config->min_width > r->width) || (r->width > config->max_width))
 		return -EINVAL;
-	}
-	if ((config->min_height > r->height) || (r->height > config->max_height)) {
-		DRM_ERROR("mode new framebuffer height not within limits\n");
+
+	if ((config->min_height > r->height) || (r->height > config->max_height))
 		return -EINVAL;
-	}
 
 	mutex_lock(&dev->mode_config.mutex);
 
@@ -1756,7 +1749,6 @@ int drm_mode_rmfb(struct drm_device *dev
 	obj = drm_mode_object_find(dev, *id, DRM_MODE_OBJECT_FB);
 	/* TODO check that we really get a framebuffer back. */
 	if (!obj) {
-		DRM_ERROR("mode invalid framebuffer id\n");
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1767,7 +1759,6 @@ int drm_mode_rmfb(struct drm_device *dev
 			found = 1;
 
 	if (!found) {
-		DRM_ERROR("tried to remove a fb that we didn't own\n");
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1814,7 +1805,6 @@ int drm_mode_getfb(struct drm_device *de
 	mutex_lock(&dev->mode_config.mutex);
 	obj = drm_mode_object_find(dev, r->fb_id, DRM_MODE_OBJECT_FB);
 	if (!obj) {
-		DRM_ERROR("invalid framebuffer id\n");
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1850,7 +1840,6 @@ int drm_mode_dirtyfb_ioctl(struct drm_de
 	mutex_lock(&dev->mode_config.mutex);
 	obj = drm_mode_object_find(dev, r->fb_id, DRM_MODE_OBJECT_FB);
 	if (!obj) {
-		DRM_ERROR("invalid framebuffer id\n");
 		ret = -EINVAL;
 		goto out_err1;
 	}

[ 020/135] drm: Check for invalid cursor flags

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jakob Bornecrantz <jakob@vmware.com>

commit 7c4eaca4162d0b5ad4fb39f974d7ffd71b9daa09 upstream.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/drm_crtc.c |    2 +-
 include/drm/drm_mode.h     |    5 +++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 08a7aa7..6fbfc24 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1981,7 +1981,7 @@ int drm_mode_cursor_ioctl(struct drm_device *dev,
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		return -EINVAL;
 
-	if (!req->flags)
+	if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags))
 		return -EINVAL;
 
 	mutex_lock(&dev->mode_config.mutex);
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
index 5581980..3d6301b 100644
--- a/include/drm/drm_mode.h
+++ b/include/drm/drm_mode.h
@@ -359,8 +359,9 @@ struct drm_mode_mode_cmd {
 	struct drm_mode_modeinfo mode;
 };
 
-#define DRM_MODE_CURSOR_BO	(1<<0)
-#define DRM_MODE_CURSOR_MOVE	(1<<1)
+#define DRM_MODE_CURSOR_BO	0x01
+#define DRM_MODE_CURSOR_MOVE	0x02
+#define DRM_MODE_CURSOR_FLAGS	0x03
 
 /*
  * depending on the value in flags different members are used.

[ 021/135] HID: multitouch: support PixArt optical touch screen

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Tian <aaron_tian@pixart.com.tw>

commit b7ea95ff9baab144dacdc30d752307938c5ab6bf upstream.

This patch modifies hid-multitouch driver for supporting PixArt optical touch
screen.  Because of the device does not have to set initial report, we apply
"HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[]

Signed-off-by: Aaron Tian <aaron_tian@pixart.com.tw>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/hid/Kconfig             |    1 +
 drivers/hid/hid-core.c          |    3 +++
 drivers/hid/hid-ids.h           |    5 +++++
 drivers/hid/hid-multitouch.c    |   15 +++++++++++++++
 drivers/hid/usbhid/hid-quirks.c |    3 +++
 5 files changed, 27 insertions(+)

--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -350,6 +350,7 @@ config HID_MULTITOUCH
 	  - Lumio CrystalTouch panels
 	  - MosArt dual-touch panels
 	  - PenMount dual touch panels
+	  - PixArt optical touch screen
 	  - Pixcir dual touch panels
 	  - eGalax dual-touch panels, including the Joojoo and Wetab tablets
 	  - Stantum multitouch panels
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1507,6 +1507,9 @@ static const struct hid_device_id hid_ha
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_PCI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -593,6 +593,11 @@
 #define USB_VENDOR_ID_PI_ENGINEERING	0x05f3
 #define USB_DEVICE_ID_PI_ENGINEERING_VEC_USB_FOOTPEDAL	0xff
 
+#define USB_VENDOR_ID_PIXART				0x093a
+#define USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN	0x8001
+#define USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1	0x8002
+#define USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2	0x8003
+
 #define USB_VENDOR_ID_PLAYDOTCOM	0x0b43
 #define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII	0x0003
 
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -93,6 +93,7 @@ struct mt_class {
 #define MT_CLS_DUAL_INRANGE_CONTACTID		0x0005
 #define MT_CLS_DUAL_INRANGE_CONTACTNUMBER	0x0006
 #define MT_CLS_DUAL_NSMU_CONTACTID		0x0007
+#define MT_CLS_INRANGE_CONTACTNUMBER		0x0009
 
 /* vendor specific classes */
 #define MT_CLS_3M				0x0101
@@ -155,6 +156,9 @@ struct mt_class mt_classes[] = {
 		.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP |
 			MT_QUIRK_SLOT_IS_CONTACTID,
 		.maxcontacts = 2 },
+	{ .name = MT_CLS_INRANGE_CONTACTNUMBER,
+		.quirks = MT_QUIRK_VALID_IS_INRANGE |
+			MT_QUIRK_SLOT_IS_CONTACTNUMBER },
 
 	/*
 	 * vendor specific classes
@@ -744,6 +748,17 @@ static const struct hid_device_id mt_dev
 		HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT,
 			USB_DEVICE_ID_PENMOUNT_PCI) },
 
+	/* PixArt optical touch screen */
+	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
+		HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
+			USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN) },
+	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
+		HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
+			USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1) },
+	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
+		HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
+			USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2) },
+
 	/* PixCir-based panels */
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
 		HID_USB_DEVICE(USB_VENDOR_ID_HANVON,
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -68,6 +68,9 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },

[ 022/135] HID: add NOGET quirk for Eaton Ellipse MAX UPS

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit 67ddbb3e6568fb1820b2cc45b00c50702b114801 upstream.

This patch (as1603) adds a NOGET quirk for the Eaton Ellipse MAX UPS
device.  (The USB IDs were already present in hid-ids.h, apparently
under a different name.)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Laurent Bigonville <l.bigonville@edpnet.be>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/hid/usbhid/hid-quirks.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 903eef3..991e85c 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -70,6 +70,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },

[ 023/135] drm/radeon: dont disable plls that are in use by other crtcs

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1514 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 4e58591c8961b3e31709313f75819f2eec06e322 upstream.

Some plls are shared for DP.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
[bwh: Backported to 3.2: add the dev and rdev variables, previously added
 upstream to support DCE6.1 which isn't supported in this version]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1578,10 +1578,25 @@ static void atombios_crtc_commit(struct
 static void atombios_crtc_disable(struct drm_crtc *crtc)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_atom_ss ss;
+	int i;
 
 	atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
 
+	for (i = 0; i < rdev->num_crtc; i++) {
+		if (rdev->mode_info.crtcs[i] &&
+		    rdev->mode_info.crtcs[i]->enabled &&
+		    i != radeon_crtc->crtc_id &&
+		    radeon_crtc->pll_id == rdev->mode_info.crtcs[i]->pll_id) {
+			/* one other crtc is using this pll don't turn
+			 * off the pll
+			 */
+			goto done;
+		}
+	}
+
 	switch (radeon_crtc->pll_id) {
 	case ATOM_PPLL1:
 	case ATOM_PPLL2:
@@ -1592,6 +1607,7 @@ static void atombios_crtc_disable(struct
 	default:
 		break;
 	}
+done:
 	radeon_crtc->pll_id = -1;
 }
 

[ 024/135] drm/radeon/atom: rework DIG modesetting on DCE3+

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 8d1af57ae3c4458ed0de93ef97f388dd1b3239c7 upstream.

The ordering is important and the current drm code
wasn't cutting it for modern DIG encoders.  We need
to have information about crtc before setting up
the encoders so I've shifted the ordering a bit.
Probably we'll need a full rework akin to danvet's
recent intel patchs.  This patch fixes numerous
issues with DP bridge chips and makes link training
much more reliable.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[bwh: Backported to 3.2: drop DCE6 cases]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---

--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -1344,6 +1344,8 @@ radeon_atom_encoder_dpms_dig(struct drm_
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
+	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
 	struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
 	struct radeon_connector *radeon_connector = NULL;
 	struct radeon_connector_atom_dig *radeon_dig_connector = NULL;
@@ -1355,12 +1357,38 @@ radeon_atom_encoder_dpms_dig(struct drm_
 
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
-		/* some early dce3.2 boards have a bug in their transmitter control table */
-		if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730) ||
-		    ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev))
+		if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) {
+			if (!connector)
+				dig->panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE;
+			else
+				dig->panel_mode = radeon_dp_get_panel_mode(encoder, connector);
+
+			/* setup and enable the encoder */
+			atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0);
+			atombios_dig_encoder_setup(encoder,
+						   ATOM_ENCODER_CMD_SETUP_PANEL_MODE,
+						   dig->panel_mode);
+			if (ext_encoder) {
+				if (ASIC_IS_DCE41(rdev))
+					atombios_external_encoder_setup(encoder, ext_encoder,
+									EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP);
+			}
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
+		} else if (ASIC_IS_DCE4(rdev)) {
+			/* setup and enable the encoder */
+			atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0);
+			/* enable the transmitter */
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
-		else
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
+		} else {
+			/* setup and enable the encoder and transmitter */
+			atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0);
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0);
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
+			/* some early dce3.2 boards have a bug in their transmitter control table */
+			if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730))
+				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
+		}
 		if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
 			if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
 				atombios_set_edp_panel_power(connector,
@@ -1377,10 +1403,19 @@ radeon_atom_encoder_dpms_dig(struct drm_
 	case DRM_MODE_DPMS_STANDBY:
 	case DRM_MODE_DPMS_SUSPEND:
 	case DRM_MODE_DPMS_OFF:
-		if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev))
+		if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) {
+			/* disable the transmitter */
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-		else
+		} else if (ASIC_IS_DCE4(rdev)) {
+			/* disable the transmitter */
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
+		} else {
+			/* disable the encoder and transmitter */
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
+			atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
+		}
 		if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
 			if (ASIC_IS_DCE4(rdev))
 				atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0);
@@ -1805,10 +1840,12 @@ radeon_atom_encoder_mode_set(struct drm_
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
 
 	radeon_encoder->pixel_clock = adjusted_mode->clock;
 
+	/* need to call this here rather than in prepare() since we need some crtc info */
+	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+
 	if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE4(rdev)) {
 		if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT))
 			atombios_yuv_setup(encoder, true);
@@ -1827,38 +1864,7 @@ radeon_atom_encoder_mode_set(struct drm_
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-		if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) {
-			struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-			struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-
-			if (!connector)
-				dig->panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE;
-			else
-				dig->panel_mode = radeon_dp_get_panel_mode(encoder, connector);
-
-			/* setup and enable the encoder */
-			atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0);
-			atombios_dig_encoder_setup(encoder,
-						   ATOM_ENCODER_CMD_SETUP_PANEL_MODE,
-						   dig->panel_mode);
-		} else if (ASIC_IS_DCE4(rdev)) {
-			/* disable the transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-			/* setup and enable the encoder */
-			atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0);
-
-			/* enable the transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
-		} else {
-			/* disable the encoder and transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-			atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
-
-			/* setup and enable the encoder and transmitter */
-			atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0);
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0);
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
-		}
+		/* handled in dpms */
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DDI:
 	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
@@ -1879,14 +1885,6 @@ radeon_atom_encoder_mode_set(struct drm_
 		break;
 	}
 
-	if (ext_encoder) {
-		if (ASIC_IS_DCE41(rdev))
-			atombios_external_encoder_setup(encoder, ext_encoder,
-							EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP);
-		else
-			atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
-	}
-
 	atombios_apply_encoder_quirks(encoder, adjusted_mode);
 
 	if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
@@ -2059,7 +2057,6 @@ static void radeon_atom_encoder_prepare(
 	}
 
 	radeon_atom_output_lock(encoder, true);
-	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
 
 	if (connector) {
 		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
@@ -2080,6 +2077,7 @@ static void radeon_atom_encoder_prepare(
 
 static void radeon_atom_encoder_commit(struct drm_encoder *encoder)
 {
+	/* need to call this here as we need the crtc set up */
 	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
 	radeon_atom_output_lock(encoder, false);
 }
@@ -2120,14 +2118,7 @@ static void radeon_atom_encoder_disable(
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-		if (ASIC_IS_DCE4(rdev))
-			/* disable the transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-		else {
-			/* disable the encoder and transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-			atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
-		}
+		/* handled in dpms */
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DDI:
 	case ENCODER_OBJECT_ID_INTERNAL_DVO1:

[ 025/135] drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Glisse <jglisse@redhat.com>

commit 4a2b6662c3632176b4fdf012243dd3751367bf1f upstream.

It seems some of those IGP dislike non dma32 page despite what
documentation says. Fix regression since we allowed non dma32
pages. It seems it only affect some revision of those IGP chips
as we don't know which one just force dma32 for all of them.

https://bugzilla.redhat.com/show_bug.cgi?id=785375

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/radeon_device.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index d2e2438..33da8bf 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -1051,7 +1051,7 @@ int radeon_device_init(struct radeon_device *rdev,
 	if (rdev->flags & RADEON_IS_AGP)
 		rdev->need_dma32 = true;
 	if ((rdev->flags & RADEON_IS_PCI) &&
-	    (rdev->family < CHIP_RS400))
+	    (rdev->family <= CHIP_RS740))
 		rdev->need_dma32 = true;
 
 	dma_bits = rdev->need_dma32 ? 32 : 40;

[ 026/135] drm/edid/quirks: ViewSonic VA2026w

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adam Jackson <ajax@redhat.com>

commit bc42aabc6a01b92b0f961d65671564e0e1cd7592 upstream.

Entirely new class of fail for this one.  The detailed timings are for
normal CVT but the monitor really wanted CVT-R.

Bugzilla: http://bugzilla.redhat/com/516471
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/drm_edid.c |   22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 608bddf..c3b5139 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -66,6 +66,8 @@
 #define EDID_QUIRK_FIRST_DETAILED_PREFERRED	(1 << 5)
 /* use +hsync +vsync for detailed mode */
 #define EDID_QUIRK_DETAILED_SYNC_PP		(1 << 6)
+/* Force reduced-blanking timings for detailed modes */
+#define EDID_QUIRK_FORCE_REDUCED_BLANKING	(1 << 7)
 
 struct detailed_mode_closure {
 	struct drm_connector *connector;
@@ -120,6 +122,9 @@ static struct edid_quirk {
 	/* Samsung SyncMaster 22[5-6]BW */
 	{ "SAM", 596, EDID_QUIRK_PREFER_LARGE_60 },
 	{ "SAM", 638, EDID_QUIRK_PREFER_LARGE_60 },
+
+	/* ViewSonic VA2026w */
+	{ "VSC", 5020, EDID_QUIRK_FORCE_REDUCED_BLANKING },
 };
 
 /*** DDC fetch and block validation ***/
@@ -885,12 +890,19 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 				"Wrong Hsync/Vsync pulse width\n");
 		return NULL;
 	}
+
+	if (quirks & EDID_QUIRK_FORCE_REDUCED_BLANKING) {
+		mode = drm_cvt_mode(dev, hactive, vactive, 60, true, false, false);
+		if (!mode)
+			return NULL;
+
+		goto set_size;
+	}
+
 	mode = drm_mode_create(dev);
 	if (!mode)
 		return NULL;
 
-	mode->type = DRM_MODE_TYPE_DRIVER;
-
 	if (quirks & EDID_QUIRK_135_CLOCK_TOO_HIGH)
 		timing->pixel_clock = cpu_to_le16(1088);
 
@@ -914,8 +926,6 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 
 	drm_mode_do_interlace_quirk(mode, pt);
 
-	drm_mode_set_name(mode);
-
 	if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
 		pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE;
 	}
@@ -925,6 +935,7 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 	mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ?
 		DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
 
+set_size:
 	mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
 	mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
 
@@ -938,6 +949,9 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 		mode->height_mm = edid->height_cm * 10;
 	}
 
+	mode->type = DRM_MODE_TYPE_DRIVER;
+	drm_mode_set_name(mode);
+
 	return mode;
 }
 

[ 027/135] drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Menzel <paulepanter@users.sourceforge.net>

commit 6f33814bd4d9cfe76033a31b1c0c76c960cd8e4b upstream.

Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with
vertical stripes in the top half.

In commit bc42aabc [2]

        commit bc42aabc6a01b92b0f961d65671564e0e1cd7592
        Author: Adam Jackson <ajax@redhat.com>
        Date:   Wed May 23 16:26:54 2012 -0400

            drm/edid/quirks: ViewSonic VA2026w

Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which
is also needed for this ASUS monitor.

All log files and output from `xrandr` is included in the referenced
Bugzilla report #17629.

Please note that this monitor only has a VGA (D-Sub) connector [1].

[1] http://www.asus.com/Display/LCD_Monitors/VW222S/
[2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Cc: <dri-devel@lists.freedesktop.org>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Ian Pilcher <arequipeno@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/drm_edid.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index a8743c3..b7ee230 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -87,6 +87,9 @@ static struct edid_quirk {
 	int product_id;
 	u32 quirks;
 } edid_quirk_list[] = {
+	/* ASUS VW222S */
+	{ "ACI", 0x22a2, EDID_QUIRK_FORCE_REDUCED_BLANKING },
+
 	/* Acer AL1706 */
 	{ "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 },
 	/* Acer F51 */

[ 028/135] e1000e: DoS while TSO enabled caused by link partner with small MSS

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

I was able to test the backported fix myself, having found the bug in the
first place.

------------------

From: Bruce Allan <bruce.w.allan@intel.com>

commit d821a4c4d11ad160925dab2bb009b8444beff484 upstream.

With a low enough MSS on the link partner and TSO enabled locally, the
networking stack can periodically send a very large (e.g.  64KB) TCP
message for which the driver will attempt to use more Tx descriptors than
are available by default in the Tx ring.  This is due to a workaround in
the code that imposes a limit of only 4 MSS-sized segments per descriptor
which appears to be a carry-over from the older e1000 driver and may be
applicable only to some older PCI or PCIx parts which are not supported in
e1000e.  When the driver gets a message that is too large to fit across the
configured number of Tx descriptors, it stops the upper stack from queueing
any more and gets stuck in this state.  After a timeout, the upper stack
assumes the adapter is hung and calls the driver to reset it.

Remove the unnecessary limitation of using up to only 4 MSS-sized segments
per Tx descriptor, and put in a hard failure test to catch when attempting
to check for message sizes larger than would fit in the whole Tx ring.
Refactor the remaining logic that limits the size of data per Tx descriptor
from a seemingly arbitrary 8KB to a limit based on the dynamic size of the
Tx packet buffer as described in the hardware specification.

Also, fix the logic in the check for space in the Tx ring for the next
largest possible packet after the current one has been successfully queued
for transmit, and use the appropriate defines for default ring sizes in
e1000_probe instead of magic values.

This issue goes back to the introduction of e1000e in 2.6.24 when it was
split off from e1000.

Reported-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2:
 - Adjust context
 - Adjust for use of net_device vs e1000_ring parameter]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -302,6 +302,7 @@ struct e1000_adapter {
 	 */
 	struct e1000_ring *tx_ring /* One per active queue */
 						____cacheline_aligned_in_smp;
+	u32 tx_fifo_limit;
 
 	struct napi_struct napi;
 
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3386,6 +3386,15 @@ void e1000e_reset(struct e1000_adapter *
 	}
 
 	/*
+	 * Alignment of Tx data is on an arbitrary byte boundary with the
+	 * maximum size per Tx descriptor limited only to the transmit
+	 * allocation of the packet buffer minus 96 bytes with an upper
+	 * limit of 24KB due to receive synchronization limitations.
+	 */
+	adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96,
+				       24 << 10);
+
+	/*
 	 * Disable Adaptive Interrupt Moderation if 2 full packets cannot
 	 * fit in receive buffer and early-receive not supported.
 	 */
@@ -4647,13 +4656,9 @@ static bool e1000_tx_csum(struct e1000_a
 	return 1;
 }
 
-#define E1000_MAX_PER_TXD	8192
-#define E1000_MAX_TXD_PWR	12
-
 static int e1000_tx_map(struct e1000_adapter *adapter,
 			struct sk_buff *skb, unsigned int first,
-			unsigned int max_per_txd, unsigned int nr_frags,
-			unsigned int mss)
+			unsigned int max_per_txd, unsigned int nr_frags)
 {
 	struct e1000_ring *tx_ring = adapter->tx_ring;
 	struct pci_dev *pdev = adapter->pdev;
@@ -4882,20 +4887,19 @@ static int e1000_maybe_stop_tx(struct ne
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
+	BUG_ON(size > adapter->tx_ring->count);
+
 	if (e1000_desc_unused(adapter->tx_ring) >= size)
 		return 0;
 	return __e1000_maybe_stop_tx(netdev, size);
 }
 
-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				    struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_ring *tx_ring = adapter->tx_ring;
 	unsigned int first;
-	unsigned int max_per_txd = E1000_MAX_PER_TXD;
-	unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
 	unsigned int tx_flags = 0;
 	unsigned int len = skb_headlen(skb);
 	unsigned int nr_frags;
@@ -4915,18 +4919,8 @@ static netdev_tx_t e1000_xmit_frame(stru
 	}
 
 	mss = skb_shinfo(skb)->gso_size;
-	/*
-	 * The controller does a simple calculation to
-	 * make sure there is enough room in the FIFO before
-	 * initiating the DMA for each buffer.  The calc is:
-	 * 4 = ceil(buffer len/mss).  To make sure we don't
-	 * overrun the FIFO, adjust the max buffer len if mss
-	 * drops.
-	 */
 	if (mss) {
 		u8 hdr_len;
-		max_per_txd = min(mss << 2, max_per_txd);
-		max_txd_pwr = fls(max_per_txd) - 1;
 
 		/*
 		 * TSO Workaround for 82571/2/3 Controllers -- if skb->data
@@ -4956,12 +4950,12 @@ static netdev_tx_t e1000_xmit_frame(stru
 		count++;
 	count++;
 
-	count += TXD_USE_COUNT(len, max_txd_pwr);
+	count += DIV_ROUND_UP(len, adapter->tx_fifo_limit);
 
 	nr_frags = skb_shinfo(skb)->nr_frags;
 	for (f = 0; f < nr_frags; f++)
-		count += TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->frags[f]),
-				       max_txd_pwr);
+		count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]),
+				      adapter->tx_fifo_limit);
 
 	if (adapter->hw.mac.tx_pkt_filtering)
 		e1000_transfer_dhcp_info(adapter, skb);
@@ -5000,12 +4994,15 @@ static netdev_tx_t e1000_xmit_frame(stru
 		tx_flags |= E1000_TX_FLAGS_IPV4;
 
 	/* if count is 0 then mapping error has occurred */
-	count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
+	count = e1000_tx_map(adapter, skb, first, adapter->tx_fifo_limit,
+			     nr_frags);
 	if (count) {
 		e1000_tx_queue(adapter, tx_flags, count);
 		/* Make sure there is space in the ring for the next send. */
-		e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
-
+		e1000_maybe_stop_tx(netdev,
+				    (MAX_SKB_FRAGS *
+				     DIV_ROUND_UP(PAGE_SIZE,
+						  adapter->tx_fifo_limit) + 2));
 	} else {
 		dev_kfree_skb_any(skb);
 		tx_ring->buffer_info[first].time_stamp = 0;
@@ -6150,8 +6147,8 @@ static int __devinit e1000_probe(struct
 	adapter->hw.phy.autoneg_advertised = 0x2f;
 
 	/* ring size defaults */
-	adapter->rx_ring->count = 256;
-	adapter->tx_ring->count = 256;
+	adapter->rx_ring->count = E1000_DEFAULT_RXD;
+	adapter->tx_ring->count = E1000_DEFAULT_TXD;
 
 	/*
 	 * Initial Wake on LAN setting - If APM wake is enabled in

[ 029/135] ext3: Fix fdatasync() for files with only i_size changes

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 156bddd8e505b295540f3ca0e27dda68cb0d49aa upstream.

Code tracking when transaction needs to be committed on fdatasync(2) forgets
to handle a situation when only inode's i_size is changed. Thus in such
situations fdatasync(2) doesn't force transaction with new i_size to disk
and that can result in wrong i_size after a crash.

Fix the issue by updating inode's i_datasync_tid whenever its size is
updated.

Reported-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Signed-off-by: Jan Kara <jack@suse.cz>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/ext3/inode.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -3072,6 +3072,8 @@ static int ext3_do_update_inode(handle_t
 	struct ext3_inode_info *ei = EXT3_I(inode);
 	struct buffer_head *bh = iloc->bh;
 	int err = 0, rc, block;
+	int need_datasync = 0;
+	__le32 disksize;
 
 again:
 	/* we can't allow multiple procs in here at once, its a bit racey */
@@ -3109,7 +3111,11 @@ again:
 		raw_inode->i_gid_high = 0;
 	}
 	raw_inode->i_links_count = cpu_to_le16(inode->i_nlink);
-	raw_inode->i_size = cpu_to_le32(ei->i_disksize);
+	disksize = cpu_to_le32(ei->i_disksize);
+	if (disksize != raw_inode->i_size) {
+		need_datasync = 1;
+		raw_inode->i_size = disksize;
+	}
 	raw_inode->i_atime = cpu_to_le32(inode->i_atime.tv_sec);
 	raw_inode->i_ctime = cpu_to_le32(inode->i_ctime.tv_sec);
 	raw_inode->i_mtime = cpu_to_le32(inode->i_mtime.tv_sec);
@@ -3125,8 +3131,11 @@ again:
 	if (!S_ISREG(inode->i_mode)) {
 		raw_inode->i_dir_acl = cpu_to_le32(ei->i_dir_acl);
 	} else {
-		raw_inode->i_size_high =
-			cpu_to_le32(ei->i_disksize >> 32);
+		disksize = cpu_to_le32(ei->i_disksize >> 32);
+		if (disksize != raw_inode->i_size_high) {
+			raw_inode->i_size_high = disksize;
+			need_datasync = 1;
+		}
 		if (ei->i_disksize > 0x7fffffffULL) {
 			struct super_block *sb = inode->i_sb;
 			if (!EXT3_HAS_RO_COMPAT_FEATURE(sb,
@@ -3179,6 +3188,8 @@ again:
 	ext3_clear_inode_state(inode, EXT3_STATE_NEW);
 
 	atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid);
+	if (need_datasync)
+		atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid);
 out_brelse:
 	brelse (bh);
 	ext3_std_error(inode->i_sb, err);

[ 030/135] UBI: fix a horrible memory deallocation bug

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

commit 78b495c39add820ab66ab897af9bd77a5f2e91f6 upstream.

UBI was mistakingly using 'kfree()' instead of 'kmem_cache_free()' when
freeing "attach eraseblock" structures in vtbl.c. Thankfully, this happened
only when we were doing auto-format, so many systems were unaffected. However,
there are still many users affected.

It is strange, but the system did not crash and nothing bad happened when
the SLUB memory allocator was used. However, in case of SLOB we observed an
crash right away.

This problem was introduced in 2.6.39 by commit
"6c1e875 UBI: add slab cache for ubi_scan_leb objects"

A note for stable trees:
  Because variable were renamed, this won't cleanly apply to older kernels.
  Changing names like this should help:
	1. ai -> si
	2. aeb_slab_cache -> seb_slab_cache
	3. new_aeb -> new_seb

Reported-by: Richard Genoud <richard.genoud@gmail.com>
Tested-by: Richard Genoud <richard.genoud@gmail.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[bwh: Backported to 3.2: aeb_slab_cache was actually named scan_leb_slab]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/mtd/ubi/vtbl.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -346,7 +346,7 @@ retry:
 	 */
 	err = ubi_scan_add_used(ubi, si, new_seb->pnum, new_seb->ec,
 				vid_hdr, 0);
-	kfree(new_seb);
+	kmem_cache_free(si->scan_leb_slab, new_seb);
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
 
@@ -359,7 +359,7 @@ write_error:
 		list_add(&new_seb->u.list, &si->erase);
 		goto retry;
 	}
-	kfree(new_seb);
+	kmem_cache_free(si->scan_leb_slab, new_seb);
 out_free:
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;

[ 031/135] fuse: fix retrieve length

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit c9e67d483776d8d2a5f3f70491161b205930ffe1 upstream.

In some cases fuse_retrieve() would return a short byte count if offset was
non-zero.  The data returned was correct, though.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/fuse/dev.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 7df2b5e..f4246cf 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1576,6 +1576,7 @@ static int fuse_retrieve(struct fuse_conn *fc, struct inode *inode,
 		req->pages[req->num_pages] = page;
 		req->num_pages++;
 
+		offset = 0;
 		num -= this_num;
 		total_len += this_num;
 		index++;

[ 032/135] mmc: mxs-mmc: fix deadlock in SDIO IRQ case

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lauri Hintsala <lauri.hintsala@bluegiga.com>

commit 1af36b2a993dddfa3d6860ec4879c9e8abc9b976 upstream.

Release the lock before mmc_signal_sdio_irq is called by mxs_mmc_irq_handler.

Backtrace:
[   79.660000] =============================================
[   79.660000] [ INFO: possible recursive locking detected ]
[   79.660000] 3.4.0-00009-g3e96082-dirty #11 Not tainted
[   79.660000] ---------------------------------------------
[   79.660000] swapper/0 is trying to acquire lock:
[   79.660000]  (&(&host->lock)->rlock#2){-.....}, at: [<c026ea3c>] mxs_mmc_enable_sdio_irq+0x18/0xd4
[   79.660000]
[   79.660000] but task is already holding lock:
[   79.660000]  (&(&host->lock)->rlock#2){-.....}, at: [<c026f744>] mxs_mmc_irq_handler+0x1c/0xe8
[   79.660000]
[   79.660000] other info that might help us debug this:
[   79.660000]  Possible unsafe locking scenario:
[   79.660000]
[   79.660000]        CPU0
[   79.660000]        ----
[   79.660000]   lock(&(&host->lock)->rlock#2);
[   79.660000]   lock(&(&host->lock)->rlock#2);
[   79.660000]
[   79.660000]  *** DEADLOCK ***
[   79.660000]
[   79.660000]  May be due to missing lock nesting notation
[   79.660000]
[   79.660000] 1 lock held by swapper/0:
[   79.660000]  #0:  (&(&host->lock)->rlock#2){-.....}, at: [<c026f744>] mxs_mmc_irq_handler+0x1c/0xe8
[   79.660000]
[   79.660000] stack backtrace:
[   79.660000] [<c0014bd0>] (unwind_backtrace+0x0/0xf4) from [<c005f9c0>] (__lock_acquire+0x1948/0x1d48)
[   79.660000] [<c005f9c0>] (__lock_acquire+0x1948/0x1d48) from [<c005fea0>] (lock_acquire+0xe0/0xf8)
[   79.660000] [<c005fea0>] (lock_acquire+0xe0/0xf8) from [<c03a8460>] (_raw_spin_lock_irqsave+0x44/0x58)
[   79.660000] [<c03a8460>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4)
[   79.660000] [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) from [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8)
[   79.660000] [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) from [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254)
[   79.660000] [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) from [<c006bff8>] (handle_irq_event+0x3c/0x5c)
[   79.660000] [<c006bff8>] (handle_irq_event+0x3c/0x5c) from [<c006e6d0>] (handle_level_irq+0x90/0x110)
[   79.660000] [<c006e6d0>] (handle_level_irq+0x90/0x110) from [<c006b930>] (generic_handle_irq+0x38/0x50)
[   79.660000] [<c006b930>] (generic_handle_irq+0x38/0x50) from [<c00102fc>] (handle_IRQ+0x30/0x84)
[   79.660000] [<c00102fc>] (handle_IRQ+0x30/0x84) from [<c000f058>] (__irq_svc+0x38/0x60)
[   79.660000] [<c000f058>] (__irq_svc+0x38/0x60) from [<c0010520>] (default_idle+0x2c/0x40)
[   79.660000] [<c0010520>] (default_idle+0x2c/0x40) from [<c0010a90>] (cpu_idle+0x64/0xcc)
[   79.660000] [<c0010a90>] (cpu_idle+0x64/0xcc) from [<c04ff858>] (start_kernel+0x244/0x2c8)
[   79.660000] BUG: spinlock lockup on CPU#0, swapper/0
[   79.660000]  lock: c398cb2c, .magic: dead4ead, .owner: swapper/0, .owner_cpu: 0
[   79.660000] [<c0014bd0>] (unwind_backtrace+0x0/0xf4) from [<c01ddb1c>] (do_raw_spin_lock+0xf0/0x144)
[   79.660000] [<c01ddb1c>] (do_raw_spin_lock+0xf0/0x144) from [<c03a8468>] (_raw_spin_lock_irqsave+0x4c/0x58)
[   79.660000] [<c03a8468>] (_raw_spin_lock_irqsave+0x4c/0x58) from [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4)
[   79.660000] [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) from [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8)
[   79.660000] [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) from [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254)
[   79.660000] [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) from [<c006bff8>] (handle_irq_event+0x3c/0x5c)
[   79.660000] [<c006bff8>] (handle_irq_event+0x3c/0x5c) from [<c006e6d0>] (handle_level_irq+0x90/0x110)
[   79.660000] [<c006e6d0>] (handle_level_irq+0x90/0x110) from [<c006b930>] (generic_handle_irq+0x38/0x50)
[   79.660000] [<c006b930>] (generic_handle_irq+0x38/0x50) from [<c00102fc>] (handle_IRQ+0x30/0x84)
[   79.660000] [<c00102fc>] (handle_IRQ+0x30/0x84) from [<c000f058>] (__irq_svc+0x38/0x60)
[   79.660000] [<c000f058>] (__irq_svc+0x38/0x60) from [<c0010520>] (default_idle+0x2c/0x40)
[   79.660000] [<c0010520>] (default_idle+0x2c/0x40) from [<c0010a90>] (cpu_idle+0x64/0xcc)
[   79.660000] [<c0010a90>] (cpu_idle+0x64/0xcc) from [<c04ff858>] (start_kernel+0x244/0x2c8)

Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/mmc/host/mxs-mmc.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -279,11 +279,11 @@ static irqreturn_t mxs_mmc_irq_handler(i
 	writel(stat & MXS_MMC_IRQ_BITS,
 	       host->base + HW_SSP_CTRL1 + MXS_CLR_ADDR);
 
+	spin_unlock(&host->lock);
+
 	if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
 		mmc_signal_sdio_irq(host->mmc);
 
-	spin_unlock(&host->lock);
-
 	if (stat & BM_SSP_CTRL1_RESP_TIMEOUT_IRQ)
 		cmd->error = -ETIMEDOUT;
 	else if (stat & BM_SSP_CTRL1_RESP_ERR_IRQ)

[ 033/135] mmc: mxs-mmc: fix deadlock caused by recursion loop

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lauri Hintsala <lauri.hintsala@bluegiga.com>

commit fc108d24d3a6da63576a460e122fa1df0cbdea20 upstream.

Release the lock before mmc_signal_sdio_irq is called by
mxs_mmc_enable_sdio_irq.

Backtrace:
[   65.470000] =============================================
[   65.470000] [ INFO: possible recursive locking detected ]
[   65.470000] 3.5.0-rc5 #2 Not tainted
[   65.470000] ---------------------------------------------
[   65.470000] ksdioirqd/mmc0/73 is trying to acquire lock:
[   65.470000]  (&(&host->lock)->rlock#2){-.-...}, at: [<bf054120>] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]
[   65.470000]
[   65.470000] but task is already holding lock:
[   65.470000]  (&(&host->lock)->rlock#2){-.-...}, at: [<bf054120>] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]
[   65.470000]
[   65.470000] other info that might help us debug this:
[   65.470000]  Possible unsafe locking scenario:
[   65.470000]
[   65.470000]        CPU0
[   65.470000]        ----
[   65.470000]   lock(&(&host->lock)->rlock#2);
[   65.470000]   lock(&(&host->lock)->rlock#2);
[   65.470000]
[   65.470000]  *** DEADLOCK ***
[   65.470000]
[   65.470000]  May be due to missing lock nesting notation
[   65.470000]
[   65.470000] 1 lock held by ksdioirqd/mmc0/73:
[   65.470000]  #0:  (&(&host->lock)->rlock#2){-.-...}, at: [<bf054120>] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]
[   65.470000]
[   65.470000] stack backtrace:
[   65.470000] [<c0014990>] (unwind_backtrace+0x0/0xf4) from [<c005ccb8>] (__lock_acquire+0x14f8/0x1b98)
[   65.470000] [<c005ccb8>] (__lock_acquire+0x14f8/0x1b98) from [<c005d3f8>] (lock_acquire+0xa0/0x108)
[   65.470000] [<c005d3f8>] (lock_acquire+0xa0/0x108) from [<c02f671c>] (_raw_spin_lock_irqsave+0x48/0x5c)
[   65.470000] [<c02f671c>] (_raw_spin_lock_irqsave+0x48/0x5c) from [<bf054120>] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc])
[   65.470000] [<bf054120>] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) from [<bf0541d0>] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc])
[   65.470000] [<bf0541d0>] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) from [<c0219b38>] (sdio_irq_thread+0x1bc/0x274)
[   65.470000] [<c0219b38>] (sdio_irq_thread+0x1bc/0x274) from [<c003c324>] (kthread+0x8c/0x98)
[   65.470000] [<c003c324>] (kthread+0x8c/0x98) from [<c00101ac>] (kernel_thread_exit+0x0/0x8)
[   65.470000] BUG: spinlock lockup suspected on CPU#0, ksdioirqd/mmc0/73
[   65.470000]  lock: 0xc3358724, .magic: dead4ead, .owner: ksdioirqd/mmc0/73, .owner_cpu: 0
[   65.470000] [<c0014990>] (unwind_backtrace+0x0/0xf4) from [<c01b46b0>] (do_raw_spin_lock+0x100/0x144)
[   65.470000] [<c01b46b0>] (do_raw_spin_lock+0x100/0x144) from [<c02f6724>] (_raw_spin_lock_irqsave+0x50/0x5c)
[   65.470000] [<c02f6724>] (_raw_spin_lock_irqsave+0x50/0x5c) from [<bf054120>] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc])
[   65.470000] [<bf054120>] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) from [<bf0541d0>] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc])
[   65.470000] [<bf0541d0>] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) from [<c0219b38>] (sdio_irq_thread+0x1bc/0x274)
[   65.470000] [<c0219b38>] (sdio_irq_thread+0x1bc/0x274) from [<c003c324>] (kthread+0x8c/0x98)
[   65.470000] [<c003c324>] (kthread+0x8c/0x98) from [<c00101ac>] (kernel_thread_exit+0x0/0x8)

Reported-by: Attila Kinali <attila@kinali.ch>
Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
[bwh: Backported to 3.2:
 - Adjust context
 - HW_SSP_STATUS is a simple rather than function-like macro]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/mmc/host/mxs-mmc.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -628,10 +628,6 @@ static void mxs_mmc_enable_sdio_irq(stru
 		       host->base + HW_SSP_CTRL0 + MXS_SET_ADDR);
 		writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
 		       host->base + HW_SSP_CTRL1 + MXS_SET_ADDR);
-
-		if (readl(host->base + HW_SSP_STATUS) & BM_SSP_STATUS_SDIO_IRQ)
-			mmc_signal_sdio_irq(host->mmc);
-
 	} else {
 		writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
 		       host->base + HW_SSP_CTRL0 + MXS_CLR_ADDR);
@@ -640,6 +636,10 @@ static void mxs_mmc_enable_sdio_irq(stru
 	}
 
 	spin_unlock_irqrestore(&host->lock, flags);
+
+	if (enable && readl(host->base + HW_SSP_STATUS) & BM_SSP_STATUS_SDIO_IRQ)
+		mmc_signal_sdio_irq(host->mmc);
+
 }
 
 static const struct mmc_host_ops mxs_mmc_ops = {

[ 034/135] mmc: sdhci-esdhc: break out early if clock is 0

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Guo <shawn.guo@linaro.org>

commit 74f330bceaa7b88d06062e1cac3d519a3dfc041e upstream.

Since commit 30832ab56 ("mmc: sdhci: Always pass clock request value
zero to set_clock host op") was merged, esdhc_set_clock starts hitting
"if (clock == 0)" where ESDHC_SYSTEM_CONTROL has been operated.  This
causes SDHCI card-detection function being broken.  Fix the regression
by moving "if (clock == 0)" above ESDHC_SYSTEM_CONTROL operation.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/mmc/host/sdhci-esdhc.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
index b97b2f5..d25f9ab 100644
--- a/drivers/mmc/host/sdhci-esdhc.h
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -48,14 +48,14 @@ static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock)
 	int div = 1;
 	u32 temp;
 
+	if (clock == 0)
+		goto out;
+
 	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
 	temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
 		| ESDHC_CLOCK_MASK);
 	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 
-	if (clock == 0)
-		goto out;
-
 	while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
 		pre_div *= 2;
 

[ 035/135] mmc: card: Skip secure erase on MoviNAND; causes unrecoverable corruption.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Chen <ian.cy.chen@samsung.com>

commit 3550ccdb9d8d350e526b809bf3dd92b550a74fe1 upstream.

For several MoviNAND eMMC parts, there are known issues with secure
erase and secure trim.  For these specific MoviNAND devices, we skip
these operations.

Specifically, there is a bug in the eMMC firmware that causes
unrecoverable corruption when the MMC is erased with MMC_CAP_ERASE
enabled.

References:

http://forum.xda-developers.com/showthread.php?t=1644364
https://plus.google.com/111398485184813224730/posts/21pTYfTsCkB#111398485184813224730/posts/21pTYfTsCkB

Signed-off-by: Ian Chen <ian.cy.chen@samsung.com>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/mmc/card/block.c |   26 +++++++++++++++++++++++++-
 include/linux/mmc/card.h |    1 +
 2 files changed, 26 insertions(+), 1 deletion(-)

--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1339,7 +1339,8 @@ static int mmc_blk_issue_rq(struct mmc_q
 		/* complete ongoing async transfer before issuing discard */
 		if (card->host->areq)
 			mmc_blk_issue_rw_rq(mq, NULL);
-		if (req->cmd_flags & REQ_SECURE)
+		if (req->cmd_flags & REQ_SECURE &&
+			!(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN))
 			ret = mmc_blk_issue_secdiscard_rq(mq, req);
 		else
 			ret = mmc_blk_issue_discard_rq(mq, req);
@@ -1614,6 +1615,8 @@ static int mmc_add_disk(struct mmc_blk_d
 	return ret;
 }
 
+#define CID_MANFID_SAMSUNG	0x15
+
 static const struct mmc_fixup blk_fixups[] =
 {
 	MMC_FIXUP("SEM02G", 0x2, 0x100, add_quirk, MMC_QUIRK_INAND_CMD38),
@@ -1644,6 +1647,28 @@ static const struct mmc_fixup blk_fixups
 	MMC_FIXUP(CID_NAME_ANY, 0x13, 0x200, add_quirk_mmc,
 		  MMC_QUIRK_LONG_READ_TIME),
 
+	/*
+	 * On these Samsung MoviNAND parts, performing secure erase or
+	 * secure trim can result in unrecoverable corruption due to a
+	 * firmware bug.
+	 */
+	MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+
 	END_FIXUP
 };
 
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -219,6 +219,7 @@ struct mmc_card {
 #define MMC_QUIRK_BLK_NO_CMD23	(1<<7)		/* Avoid CMD23 for regular multiblock */
 #define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8)	/* Avoid sending 512 bytes in */
 #define MMC_QUIRK_LONG_READ_TIME (1<<9)		/* Data read time > CSD says */
+#define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10)	/* Skip secure for erase/trim */
 						/* byte mode */
 	unsigned int    poweroff_notify_state;	/* eMMC4.5 notify feature */
 #define MMC_NO_POWER_NOTIFICATION	0

[ 036/135] powerpc: Update DSCR on all CPUs when writing sysfs dscr_default

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <anton@samba.org>

commit 1b6ca2a6fe56e7697d57348646e07df08f43b1bb upstream.

Writing to dscr_default in sysfs doesn't actually change the DSCR -
we rely on a context switch on each CPU to do the work. There is no
guarantee we will get a context switch in a reasonable amount of time
so fire off an IPI to force an immediate change.

This issue was found with the following test case:

http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/powerpc/kernel/sysfs.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -192,6 +192,12 @@ static ssize_t show_dscr_default(struct
 	return sprintf(buf, "%lx\n", dscr_default);
 }
 
+static void update_dscr(void *dummy)
+{
+	if (!current->thread.dscr_inherit)
+		mtspr(SPRN_DSCR, dscr_default);
+}
+
 static ssize_t __used store_dscr_default(struct sysdev_class *class,
 		struct sysdev_class_attribute *attr, const char *buf,
 		size_t count)
@@ -204,6 +210,8 @@ static ssize_t __used store_dscr_default
 		return -EINVAL;
 	dscr_default = val;
 
+	on_each_cpu(update_dscr, NULL, 1);
+
 	return count;
 }
 

[ 037/135] powerpc: Keep thread.dscr and thread.dscr_inherit in sync

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <anton@samba.org>

commit 00ca0de02f80924dfff6b4f630e1dff3db005e35 upstream.

When we update the DSCR either via emulation of mtspr(DSCR) or via
a change to dscr_default in sysfs we don't update thread.dscr.
We will eventually update it at context switch time but there is
a period where thread.dscr is incorrect.

If we fork at this point we will copy the old value of thread.dscr
into the child. To avoid this, always keep thread.dscr in sync with
reality.

This issue was found with the following testcase:

http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/powerpc/kernel/sysfs.c |    4 +++-
 arch/powerpc/kernel/traps.c |    3 ++-
 2 files changed, 5 insertions(+), 2 deletions(-)

--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -194,8 +194,10 @@ static ssize_t show_dscr_default(struct
 
 static void update_dscr(void *dummy)
 {
-	if (!current->thread.dscr_inherit)
+	if (!current->thread.dscr_inherit) {
+		current->thread.dscr = dscr_default;
 		mtspr(SPRN_DSCR, dscr_default);
+	}
 }
 
 static ssize_t __used store_dscr_default(struct sysdev_class *class,
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -942,8 +942,9 @@ static int emulate_instruction(struct pt
 			cpu_has_feature(CPU_FTR_DSCR)) {
 		PPC_WARN_EMULATED(mtdscr, regs);
 		rd = (instword >> 21) & 0x1f;
-		mtspr(SPRN_DSCR, regs->gpr[rd]);
+		current->thread.dscr = regs->gpr[rd];
 		current->thread.dscr_inherit = 1;
+		mtspr(SPRN_DSCR, current->thread.dscr);
 		return 0;
 	}
 #endif

[ 038/135] powerpc: Fix DSCR inheritance in copy_thread()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <anton@samba.org>

commit 1021cb268b3025573c4811f1dee4a11260c4507b upstream.

If the default DSCR is non zero we set thread.dscr_inherit in
copy_thread() meaning the new thread and all its children will ignore
future updates to the default DSCR. This is not intended and is
a change in behaviour that a number of our users have hit.

We just need to inherit thread.dscr and thread.dscr_inherit from
the parent which ends up being much simpler.

This was found with the following test case:

http://ozlabs.org/~anton/junkcode/dscr_default_test.c

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/powerpc/kernel/process.c |   12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 710f400..1a1f2dd 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -802,16 +802,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 #endif /* CONFIG_PPC_STD_MMU_64 */
 #ifdef CONFIG_PPC64 
 	if (cpu_has_feature(CPU_FTR_DSCR)) {
-		if (current->thread.dscr_inherit) {
-			p->thread.dscr_inherit = 1;
-			p->thread.dscr = current->thread.dscr;
-		} else if (0 != dscr_default) {
-			p->thread.dscr_inherit = 1;
-			p->thread.dscr = dscr_default;
-		} else {
-			p->thread.dscr_inherit = 0;
-			p->thread.dscr = 0;
-		}
+		p->thread.dscr_inherit = current->thread.dscr_inherit;
+		p->thread.dscr = current->thread.dscr;
 	}
 #endif
 

[ 039/135] powerpc: Restore correct DSCR in context switch

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <anton@samba.org>

commit 714332858bfd40dcf8f741498336d93875c23aa7 upstream.

During a context switch we always restore the per thread DSCR value.
If we aren't doing explicit DSCR management
(ie thread.dscr_inherit == 0) and the default DSCR changed while
the process has been sleeping we end up with the wrong value.

Check thread.dscr_inherit and select the default DSCR or per thread
DSCR as required.

This was found with the following test case, when running with
more threads than CPUs (ie forcing context switching):

http://ozlabs.org/~anton/junkcode/dscr_default_test.c

With the four patches applied I can run a combination of all
test cases successfully at the same time:

http://ozlabs.org/~anton/junkcode/dscr_default_test.c
http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c
http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/powerpc/kernel/asm-offsets.c |    1 +
 arch/powerpc/kernel/entry_64.S    |   23 +++++++++++++++++------
 2 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 85b05c4..e899572 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -76,6 +76,7 @@ int main(void)
 	DEFINE(SIGSEGV, SIGSEGV);
 	DEFINE(NMI_MASK, NMI_MASK);
 	DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr));
+	DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit));
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
 #endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 4b01a25..b40e0b4 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -370,6 +370,12 @@ _GLOBAL(ret_from_fork)
 	li	r3,0
 	b	syscall_exit
 
+	.section	".toc","aw"
+DSCR_DEFAULT:
+	.tc dscr_default[TC],dscr_default
+
+	.section	".text"
+
 /*
  * This routine switches between two different tasks.  The process
  * state of one is saved on its kernel stack.  Then the state
@@ -509,9 +515,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	mr	r1,r8		/* start using new stack pointer */
 	std	r7,PACAKSAVE(r13)
 
-	ld	r6,_CCR(r1)
-	mtcrf	0xFF,r6
-
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
 	ld	r0,THREAD_VRSAVE(r4)
@@ -520,14 +523,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_PPC64
 BEGIN_FTR_SECTION
+	lwz	r6,THREAD_DSCR_INHERIT(r4)
+	ld	r7,DSCR_DEFAULT@toc(2)
 	ld	r0,THREAD_DSCR(r4)
-	cmpd	r0,r25
-	beq	1f
+	cmpwi	r6,0
+	bne	1f
+	ld	r0,0(r7)
+1:	cmpd	r0,r25
+	beq	2f
 	mtspr	SPRN_DSCR,r0
-1:	
+2:
 END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
 #endif
 
+	ld	r6,_CCR(r1)
+	mtcrf	0xFF,r6
+
 	/* r3-r13 are destroyed -- Cort */
 	REST_8GPRS(14, r1)
 	REST_10GPRS(22, r1)

[ 040/135] powerpc/xics: Harden xics hypervisor backend

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <anton@samba.org>

commit 3ce21cdfe93efffa4ffba9cf3ca2576d3d60d6dc upstream.

During kdump stress testing I sometimes see the kdump kernel panic
with:

  Interrupt 0x306 (real) is invalid, disabling it.
  Kernel panic - not syncing: bad return code EOI - rc = -4, value=ff000306

Instead of panicing print the error message, dump the stack the first
time it happens and continue on. Add some more information to the
debug messages as well.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/powerpc/sysdev/xics/icp-hv.c |   38 ++++++++++++++++++++++++++-----------
 1 file changed, 27 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
index 9518d36..784b3fc 100644
--- a/arch/powerpc/sysdev/xics/icp-hv.c
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -27,33 +27,49 @@ static inline unsigned int icp_hv_get_xirr(unsigned char cppr)
 {
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 	long rc;
+	unsigned int ret = XICS_IRQ_SPURIOUS;
 
 	rc = plpar_hcall(H_XIRR, retbuf, cppr);
-	if (rc != H_SUCCESS)
-		panic(" bad return code xirr - rc = %lx\n", rc);
-	return (unsigned int)retbuf[0];
+	if (rc == H_SUCCESS) {
+		ret = (unsigned int)retbuf[0];
+	} else {
+		pr_err("%s: bad return code xirr cppr=0x%x returned %ld\n",
+			__func__, cppr, rc);
+		WARN_ON_ONCE(1);
+	}
+
+	return ret;
 }
 
 static inline void icp_hv_set_xirr(unsigned int value)
 {
 	long rc = plpar_hcall_norets(H_EOI, value);
-	if (rc != H_SUCCESS)
-		panic("bad return code EOI - rc = %ld, value=%x\n", rc, value);
+	if (rc != H_SUCCESS) {
+		pr_err("%s: bad return code eoi xirr=0x%x returned %ld\n",
+			__func__, value, rc);
+		WARN_ON_ONCE(1);
+	}
 }
 
 static inline void icp_hv_set_cppr(u8 value)
 {
 	long rc = plpar_hcall_norets(H_CPPR, value);
-	if (rc != H_SUCCESS)
-		panic("bad return code cppr - rc = %lx\n", rc);
+	if (rc != H_SUCCESS) {
+		pr_err("%s: bad return code cppr cppr=0x%x returned %ld\n",
+			__func__, value, rc);
+		WARN_ON_ONCE(1);
+	}
 }
 
 static inline void icp_hv_set_qirr(int n_cpu , u8 value)
 {
-	long rc = plpar_hcall_norets(H_IPI, get_hard_smp_processor_id(n_cpu),
-				     value);
-	if (rc != H_SUCCESS)
-		panic("bad return code qirr - rc = %lx\n", rc);
+	int hw_cpu = get_hard_smp_processor_id(n_cpu);
+	long rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
+	if (rc != H_SUCCESS) {
+		pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x "
+			"returned %ld\n", __func__, n_cpu, hw_cpu, value, rc);
+		WARN_ON_ONCE(1);
+	}
 }
 
 static void icp_hv_eoi(struct irq_data *d)

[ 041/135] powerpc: Make sure IPI handlers see data written by IPI senders

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Mackerras <paulus@samba.org>

commit 9fb1b36ca1234e64a5d1cc573175303395e3354d upstream.

We have been observing hangs, both of KVM guest vcpu tasks and more
generally, where a process that is woken doesn't properly wake up and
continue to run, but instead sticks in TASK_WAKING state.  This
happens because the update of rq->wake_list in ttwu_queue_remote()
is not ordered with the update of ipi_message in
smp_muxed_ipi_message_pass(), and the reading of rq->wake_list in
scheduler_ipi() is not ordered with the reading of ipi_message in
smp_ipi_demux().  Thus it is possible for the IPI receiver not to see
the updated rq->wake_list and therefore conclude that there is nothing
for it to do.

In order to make sure that anything done before smp_send_reschedule()
is ordered before anything done in the resulting call to scheduler_ipi(),
this adds barriers in smp_muxed_message_pass() and smp_ipi_demux().
The barrier in smp_muxed_message_pass() is a full barrier to ensure that
there is a full ordering between the smp_send_reschedule() caller and
scheduler_ipi().  In smp_ipi_demux(), we use xchg() rather than
xchg_local() because xchg() includes release and acquire barriers.
Using xchg() rather than xchg_local() makes sense given that
ipi_message is not just accessed locally.

This moves the barrier between setting the message and calling the
cause_ipi() function into the individual cause_ipi implementations.
Most of them -- those that used outb, out_8 or similar -- already had
a full barrier because out_8 etc. include a sync before the MMIO
store.  This adds an explicit barrier in the two remaining cases.

These changes made no measurable difference to the speed of IPIs as
measured using a simple ping-pong latency test across two CPUs on
different cores of a POWER7 machine.

The analysis of the reason why processes were not waking up properly
is due to Milton Miller.

Reported-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/powerpc/kernel/dbell.c       |    2 ++
 arch/powerpc/kernel/smp.c         |   11 +++++++++--
 arch/powerpc/sysdev/xics/icp-hv.c |    6 +++++-
 3 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
index 5b25c80..a892680 100644
--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -28,6 +28,8 @@ void doorbell_setup_this_cpu(void)
 
 void doorbell_cause_ipi(int cpu, unsigned long data)
 {
+	/* Order previous accesses vs. msgsnd, which is treated as a store */
+	mb();
 	ppc_msgsnd(PPC_DBELL, 0, data);
 }
 
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 0321007..8d4214a 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -198,8 +198,15 @@ void smp_muxed_ipi_message_pass(int cpu, int msg)
 	struct cpu_messages *info = &per_cpu(ipi_message, cpu);
 	char *message = (char *)&info->messages;
 
+	/*
+	 * Order previous accesses before accesses in the IPI handler.
+	 */
+	smp_mb();
 	message[msg] = 1;
-	mb();
+	/*
+	 * cause_ipi functions are required to include a full barrier
+	 * before doing whatever causes the IPI.
+	 */
 	smp_ops->cause_ipi(cpu, info->data);
 }
 
@@ -211,7 +218,7 @@ irqreturn_t smp_ipi_demux(void)
 	mb();	/* order any irq clear */
 
 	do {
-		all = xchg_local(&info->messages, 0);
+		all = xchg(&info->messages, 0);
 
 #ifdef __BIG_ENDIAN
 		if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION)))
diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
index 14469cf..df0fc58 100644
--- a/arch/powerpc/sysdev/xics/icp-hv.c
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -65,7 +65,11 @@ static inline void icp_hv_set_xirr(unsigned int value)
 static inline void icp_hv_set_qirr(int n_cpu , u8 value)
 {
 	int hw_cpu = get_hard_smp_processor_id(n_cpu);
-	long rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
+	long rc;
+
+	/* Make sure all previous accesses are ordered before IPI sending */
+	mb();
+	rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
 	if (rc != H_SUCCESS) {
 		pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x "
 			"returned %ld\n", __func__, n_cpu, hw_cpu, value, rc);

[ 042/135] udf: Fix data corruption for files in ICB

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 9c2fc0de1a6e638fe58c354a463f544f42a90a09 upstream.

When a file is stored in ICB (inode), we overwrite part of the file, and
the page containing file's data is not in page cache, we end up corrupting
file's data by overwriting them with zeros. The problem is we use
simple_write_begin() which simply zeroes parts of the page which are not
written to. The problem has been introduced by be021ee4 (udf: convert to
new aops).

Fix the problem by providing a ->write_begin function which makes the page
properly uptodate.

Reported-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/udf/file.c |   35 +++++++++++++++++++++++++++++------
 1 file changed, 29 insertions(+), 6 deletions(-)

diff --git a/fs/udf/file.c b/fs/udf/file.c
index 7f3f7ba..d1c6093 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -39,20 +39,24 @@
 #include "udf_i.h"
 #include "udf_sb.h"
 
-static int udf_adinicb_readpage(struct file *file, struct page *page)
+static void __udf_adinicb_readpage(struct page *page)
 {
 	struct inode *inode = page->mapping->host;
 	char *kaddr;
 	struct udf_inode_info *iinfo = UDF_I(inode);
 
-	BUG_ON(!PageLocked(page));
-
 	kaddr = kmap(page);
-	memset(kaddr, 0, PAGE_CACHE_SIZE);
 	memcpy(kaddr, iinfo->i_ext.i_data + iinfo->i_lenEAttr, inode->i_size);
+	memset(kaddr + inode->i_size, 0, PAGE_CACHE_SIZE - inode->i_size);
 	flush_dcache_page(page);
 	SetPageUptodate(page);
 	kunmap(page);
+}
+
+static int udf_adinicb_readpage(struct file *file, struct page *page)
+{
+	BUG_ON(!PageLocked(page));
+	__udf_adinicb_readpage(page);
 	unlock_page(page);
 
 	return 0;
@@ -77,6 +81,25 @@ static int udf_adinicb_writepage(struct page *page,
 	return 0;
 }
 
+static int udf_adinicb_write_begin(struct file *file,
+			struct address_space *mapping, loff_t pos,
+			unsigned len, unsigned flags, struct page **pagep,
+			void **fsdata)
+{
+	struct page *page;
+
+	if (WARN_ON_ONCE(pos >= PAGE_CACHE_SIZE))
+		return -EIO;
+	page = grab_cache_page_write_begin(mapping, 0, flags);
+	if (!page)
+		return -ENOMEM;
+	*pagep = page;
+
+	if (!PageUptodate(page) && len != PAGE_CACHE_SIZE)
+		__udf_adinicb_readpage(page);
+	return 0;
+}
+
 static int udf_adinicb_write_end(struct file *file,
 			struct address_space *mapping,
 			loff_t pos, unsigned len, unsigned copied,
@@ -98,8 +121,8 @@ static int udf_adinicb_write_end(struct file *file,
 const struct address_space_operations udf_adinicb_aops = {
 	.readpage	= udf_adinicb_readpage,
 	.writepage	= udf_adinicb_writepage,
-	.write_begin = simple_write_begin,
-	.write_end = udf_adinicb_write_end,
+	.write_begin	= udf_adinicb_write_begin,
+	.write_end	= udf_adinicb_write_end,
 };
 
 static ssize_t udf_file_aio_write(struct kiocb *iocb, const struct iovec *iov,

[ 043/135] xen: Use correct masking in xen_swiotlb_alloc_coherent.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ronny Hegewald <ronny.hegewald@online.de>

commit b5031ed1be0aa419250557123633453753181643 upstream.

When running 32-bit pvops-dom0 and a driver tries to allocate a coherent
DMA-memory the xen swiotlb-implementation returned memory beyond 4GB.

The underlaying reason is that if the supplied driver passes in a
DMA_BIT_MASK(64) ( hwdev->coherent_dma_mask is set to 0xffffffffffffffff)
our dma_mask will be u64 set to 0xffffffffffffffff even if we set it to
DMA_BIT_MASK(32) previously. Meaning we do not reset the upper bits.
By using the dma_alloc_coherent_mask function - it does the proper casting
and we get 0xfffffffff.

This caused not working sound on a system with 4 GB and a 64-bit
compatible sound-card with sets the DMA-mask to 64bit.

On bare-metal and the forward-ported xen-dom0 patches from OpenSuse a coherent
DMA-memory is always allocated inside the 32-bit address-range by calling
dma_alloc_coherent_mask.

This patch adds the same functionality to xen swiotlb and is a rebase of the
original patch from Ronny Hegewald which never got upstream b/c the
underlaying reason was not understood until now.

The original email with the original patch is in:
http://old-list-archives.xen.org/archives/html/xen-devel/2010-02/msg00038.html
the original thread from where the discussion started is in:
http://old-list-archives.xen.org/archives/html/xen-devel/2010-01/msg00928.html

Signed-off-by: Ronny Hegewald <ronny.hegewald@online.de>
Signed-off-by: Stefano Panella <stefano.panella@citrix.com>
Acked-By: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/xen/swiotlb-xen.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 1afb4fb..4d51948 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -232,7 +232,7 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 		return ret;
 
 	if (hwdev && hwdev->coherent_dma_mask)
-		dma_mask = hwdev->coherent_dma_mask;
+		dma_mask = dma_alloc_coherent_mask(hwdev, flags);
 
 	phys = virt_to_phys(ret);
 	dev_addr = xen_phys_to_bus(phys);

[ 044/135] Remove user-triggerable BUG from mpol_to_str

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Jones <davej@redhat.com>

commit 80de7c3138ee9fd86a98696fd2cf7ad89b995d0a upstream.

Trivially triggerable, found by trinity:

  kernel BUG at mm/mempolicy.c:2546!
  Process trinity-child2 (pid: 23988, threadinfo ffff88010197e000, task ffff88007821a670)
  Call Trace:
    show_numa_map+0xd5/0x450
    show_pid_numa_map+0x13/0x20
    traverse+0xf2/0x230
    seq_read+0x34b/0x3e0
    vfs_read+0xac/0x180
    sys_pread64+0xa2/0xc0
    system_call_fastpath+0x1a/0x1f
  RIP: mpol_to_str+0x156/0x360

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 mm/mempolicy.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index bd92431..4ada3be 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2562,7 +2562,7 @@ int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol, int no_context)
 		break;
 
 	default:
-		BUG();
+		return -EINVAL;
 	}
 
 	l = strlen(policy_modes[mode]);

[ 045/135] CIFS: Fix error handling in cifs_push_mandatory_locks

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Shilovsky <pshilovsky@etersoft.ru>

commit e2f2886a824ff0a56da1eaa13019fde86aa89fa6 upstream.

Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/cifs/file.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -882,7 +882,7 @@ cifs_push_mandatory_locks(struct cifsFil
 	if (!buf) {
 		mutex_unlock(&cinode->lock_mutex);
 		FreeXid(xid);
-		return rc;
+		return -ENOMEM;
 	}
 
 	for (i = 0; i < 2; i++) {

[ 046/135] drm/vmwgfx: add MODULE_DEVICE_TABLE so vmwgfx loads at boot

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit c4903429a92be60e6fe59868924a65eca4cd1a38 upstream.

This will cause udev to load vmwgfx instead of waiting for X
to do it.

Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -178,6 +178,7 @@ static struct pci_device_id vmw_pci_id_l
 	{0x15ad, 0x0405, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VMWGFX_CHIP_SVGAII},
 	{0, 0, 0}
 };
+MODULE_DEVICE_TABLE(pci, vmw_pci_id_list);
 
 static int enable_fbdev;
 

[ 047/135] i2c-designware: Fix build error if CONFIG_I2C_DESIGNWARE_PLATFORM=y && CONFIG_I2C_DESIGNWARE_PCI=y

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@gmail.com>

commit e68bb91baa0bb9817567bd45d560919e8e26373b upstream.

This patch adds config I2C_DESIGNWARE_CORE in Kconfig, and let
I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_PCI select I2C_DESIGNWARE_CORE.

Because both I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_PCI can be built as
built-in or module, we also need to export the functions in i2c-designware-core.

This fixes below build error when CONFIG_I2C_DESIGNWARE_PLATFORM=y &&
CONFIG_I2C_DESIGNWARE_PCI=y:

  LD      drivers/i2c/busses/built-in.o
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_clear_int':
i2c-designware-core.c:(.text+0xa10): multiple definition of `i2c_dw_clear_int'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x928): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_init':
i2c-designware-core.c:(.text+0x178): multiple definition of `i2c_dw_init'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x90): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `dw_readl':
i2c-designware-core.c:(.text+0xe8): multiple definition of `dw_readl'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x0): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_isr':
i2c-designware-core.c:(.text+0x724): multiple definition of `i2c_dw_isr'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x63c): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_xfer':
i2c-designware-core.c:(.text+0x4b0): multiple definition of `i2c_dw_xfer'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x3c8): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_is_enabled':
i2c-designware-core.c:(.text+0x9d4): multiple definition of `i2c_dw_is_enabled'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8ec): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `dw_writel':
i2c-designware-core.c:(.text+0x124): multiple definition of `dw_writel'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x3c): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_xfer_msg':
i2c-designware-core.c:(.text+0x2e8): multiple definition of `i2c_dw_xfer_msg'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x200): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_enable':
i2c-designware-core.c:(.text+0x9c8): multiple definition of `i2c_dw_enable'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8e0): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_read_comp_param':
i2c-designware-core.c:(.text+0xa24): multiple definition of `i2c_dw_read_comp_param'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x93c): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_disable':
i2c-designware-core.c:(.text+0x9dc): multiple definition of `i2c_dw_disable'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8f4): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_func':
i2c-designware-core.c:(.text+0x710): multiple definition of `i2c_dw_func'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x628): first defined here
drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_disable_int':
i2c-designware-core.c:(.text+0xa18): multiple definition of `i2c_dw_disable_int'
drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x930): first defined here
make[3]: *** [drivers/i2c/busses/built-in.o] Error 1
make[2]: *** [drivers/i2c/busses] Error 2
make[1]: *** [drivers/i2c] Error 2
make: *** [drivers] Error 2

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/i2c/busses/Kconfig               |    5 +++++
 drivers/i2c/busses/Makefile              |    5 +++--
 drivers/i2c/busses/i2c-designware-core.c |   11 +++++++++++
 3 files changed, 19 insertions(+), 2 deletions(-)

--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -349,9 +349,13 @@ config I2C_DAVINCI
 	  devices such as DaVinci NIC.
 	  For details please see http://www.ti.com/davinci
 
+config I2C_DESIGNWARE_CORE
+	tristate
+
 config I2C_DESIGNWARE_PLATFORM
 	tristate "Synopsys DesignWare Platfrom"
 	depends on HAVE_CLK
+	select I2C_DESIGNWARE_CORE
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
@@ -362,6 +366,7 @@ config I2C_DESIGNWARE_PLATFORM
 config I2C_DESIGNWARE_PCI
 	tristate "Synopsys DesignWare PCI"
 	depends on PCI
+	select I2C_DESIGNWARE_CORE
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,10 +33,11 @@ obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
 obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
+obj-$(CONFIG_I2C_DESIGNWARE_CORE)	+= i2c-designware-core.o
 obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
-i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+i2c-designware-platform-objs := i2c-designware-platdrv.o
 obj-$(CONFIG_I2C_DESIGNWARE_PCI)	+= i2c-designware-pci.o
-i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
+i2c-designware-pci-objs := i2c-designware-pcidrv.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -25,6 +25,7 @@
  * ----------------------------------------------------------------------------
  *
  */
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <linux/errno.h>
 #include <linux/err.h>
@@ -305,6 +306,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	dw_writel(dev, dev->master_cfg , DW_IC_CON);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(i2c_dw_init);
 
 /*
  * Waiting for bus not busy
@@ -557,12 +559,14 @@ done:
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(i2c_dw_xfer);
 
 u32 i2c_dw_func(struct i2c_adapter *adap)
 {
 	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 	return dev->functionality;
 }
+EXPORT_SYMBOL_GPL(i2c_dw_func);
 
 static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
 {
@@ -667,17 +671,20 @@ tx_aborted:
 
 	return IRQ_HANDLED;
 }
+EXPORT_SYMBOL_GPL(i2c_dw_isr);
 
 void i2c_dw_enable(struct dw_i2c_dev *dev)
 {
        /* Enable the adapter */
 	dw_writel(dev, 1, DW_IC_ENABLE);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_enable);
 
 u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev)
 {
 	return dw_readl(dev, DW_IC_ENABLE);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_is_enabled);
 
 void i2c_dw_disable(struct dw_i2c_dev *dev)
 {
@@ -688,18 +695,22 @@ void i2c_dw_disable(struct dw_i2c_dev *d
 	dw_writel(dev, 0, DW_IC_INTR_MASK);
 	dw_readl(dev, DW_IC_CLR_INTR);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_disable);
 
 void i2c_dw_clear_int(struct dw_i2c_dev *dev)
 {
 	dw_readl(dev, DW_IC_CLR_INTR);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_clear_int);
 
 void i2c_dw_disable_int(struct dw_i2c_dev *dev)
 {
 	dw_writel(dev, 0, DW_IC_INTR_MASK);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_disable_int);
 
 u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
 {
 	return dw_readl(dev, DW_IC_COMP_PARAM_1);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);

[ 048/135] net: Allow driver to limit number of GSO segments per skb

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commit 30b678d844af3305cda5953467005cebb5d7b687 ]

A peer (or local user) may cause TCP to use a nominal MSS of as little
as 88 (actual MSS of 76 with timestamps).  Given that we have a
sufficiently prodigious local sender and the peer ACKs quickly enough,
it is nevertheless possible to grow the window for such a connection
to the point that we will try to send just under 64K at once.  This
results in a single skb that expands to 861 segments.

In some drivers with TSO support, such an skb will require hundreds of
DMA descriptors; a substantial fraction of a TX ring or even more than
a full ring.  The TX queue selected for the skb may stall and trigger
the TX watchdog repeatedly (since the problem skb will be retried
after the TX reset).  This particularly affects sfc, for which the
issue is designated as CVE-2012-3412.

Therefore:
1. Add the field net_device::gso_max_segs holding the device-specific
   limit.
2. In netif_skb_features(), if the number of segments is too high then
   mask out GSO features to force fall back to software GSO.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/netdevice.h | 2 ++
 net/core/dev.c            | 4 ++++
 2 files changed, 6 insertions(+)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index cb52340..d178fb8 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1299,6 +1299,8 @@ struct net_device {
 	/* for setting kernel sock attribute on TCP connection setup */
 #define GSO_MAX_SIZE		65536
 	unsigned int		gso_max_size;
+#define GSO_MAX_SEGS		65535
+	u16			gso_max_segs;
 
 #ifdef CONFIG_DCB
 	/* Data Center Bridging netlink ops */
diff --git a/net/core/dev.c b/net/core/dev.c
index 4b18703..e6f2635 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2108,6 +2108,9 @@ u32 netif_skb_features(struct sk_buff *skb)
 	__be16 protocol = skb->protocol;
 	u32 features = skb->dev->features;
 
+	if (skb_shinfo(skb)->gso_segs > skb->dev->gso_max_segs)
+		features &= ~NETIF_F_GSO_MASK;
+
 	if (protocol == htons(ETH_P_8021Q)) {
 		struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data;
 		protocol = veh->h_vlan_encapsulated_proto;
@@ -5990,6 +5993,7 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
 	dev_net_set(dev, &init_net);
 
 	dev->gso_max_size = GSO_MAX_SIZE;
+	dev->gso_max_segs = GSO_MAX_SEGS;
 
 	INIT_LIST_HEAD(&dev->napi_list);
 	INIT_LIST_HEAD(&dev->unreg_list);

[ 049/135] sfc: Fix maximum number of TSO segments and minimum TX queue size

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commit 7e6d06f0de3f74ca929441add094518ae332257c ]

Currently an skb requiring TSO may not fit within a minimum-size TX
queue.  The TX queue selected for the skb may stall and trigger the TX
watchdog repeatedly (since the problem skb will be retried after the
TX reset).  This issue is designated as CVE-2012-3412.

Set the maximum number of TSO segments for our devices to 100.  This
should make no difference to behaviour unless the actual MSS is less
than about 700.  Increase the minimum TX queue size accordingly to
allow for 2 worst-case skbs, so that there will definitely be space
to add an skb after we wake a queue.

To avoid invalidating existing configurations, change
efx_ethtool_set_ringparam() to fix up values that are too small rather
than returning -EINVAL.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/ethernet/sfc/efx.c     |  6 ++++++
 drivers/net/ethernet/sfc/efx.h     | 14 ++++++++++----
 drivers/net/ethernet/sfc/ethtool.c | 16 +++++++++++-----
 drivers/net/ethernet/sfc/nic.h     |  5 +++++
 drivers/net/ethernet/sfc/tx.c      | 19 +++++++++++++++++++
 5 files changed, 51 insertions(+), 9 deletions(-)

--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -1383,6 +1383,11 @@ static int efx_probe_all(struct efx_nic
 		goto fail2;
 	}
 
+	BUILD_BUG_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_RXQ_MIN_ENT);
+	if (WARN_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_TXQ_MIN_ENT(efx))) {
+		rc = -EINVAL;
+		goto fail3;
+	}
 	efx->rxq_entries = efx->txq_entries = EFX_DEFAULT_DMAQ_SIZE;
 	rc = efx_probe_channels(efx);
 	if (rc)
@@ -1973,6 +1978,7 @@ static int efx_register_netdev(struct ef
 	net_dev->irq = efx->pci_dev->irq;
 	net_dev->netdev_ops = &efx_netdev_ops;
 	SET_ETHTOOL_OPS(net_dev, &efx_ethtool_ops);
+	net_dev->gso_max_segs = EFX_TSO_MAX_SEGS;
 
 	/* Clear MAC statistics */
 	efx->mac_op->update_stats(efx);
--- a/drivers/net/ethernet/sfc/efx.h
+++ b/drivers/net/ethernet/sfc/efx.h
@@ -34,6 +34,7 @@ extern netdev_tx_t
 efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb);
 extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index);
 extern int efx_setup_tc(struct net_device *net_dev, u8 num_tc);
+extern unsigned int efx_tx_max_skb_descs(struct efx_nic *efx);
 
 /* RX */
 extern int efx_probe_rx_queue(struct efx_rx_queue *rx_queue);
@@ -56,10 +57,15 @@ extern void efx_schedule_slow_fill(struc
 #define EFX_MAX_EVQ_SIZE 16384UL
 #define EFX_MIN_EVQ_SIZE 512UL
 
-/* The smallest [rt]xq_entries that the driver supports. Callers of
- * efx_wake_queue() assume that they can subsequently send at least one
- * skb. Falcon/A1 may require up to three descriptors per skb_frag. */
-#define EFX_MIN_RING_SIZE (roundup_pow_of_two(2 * 3 * MAX_SKB_FRAGS))
+/* Maximum number of TCP segments we support for soft-TSO */
+#define EFX_TSO_MAX_SEGS	100
+
+/* The smallest [rt]xq_entries that the driver supports.  RX minimum
+ * is a bit arbitrary.  For TX, we must have space for at least 2
+ * TSO skbs.
+ */
+#define EFX_RXQ_MIN_ENT		128U
+#define EFX_TXQ_MIN_ENT(efx)	(2 * efx_tx_max_skb_descs(efx))
 
 /* Filters */
 extern int efx_probe_filters(struct efx_nic *efx);
--- a/drivers/net/ethernet/sfc/ethtool.c
+++ b/drivers/net/ethernet/sfc/ethtool.c
@@ -690,21 +690,27 @@ static int efx_ethtool_set_ringparam(str
 				     struct ethtool_ringparam *ring)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
+	u32 txq_entries;
 
 	if (ring->rx_mini_pending || ring->rx_jumbo_pending ||
 	    ring->rx_pending > EFX_MAX_DMAQ_SIZE ||
 	    ring->tx_pending > EFX_MAX_DMAQ_SIZE)
 		return -EINVAL;
 
-	if (ring->rx_pending < EFX_MIN_RING_SIZE ||
-	    ring->tx_pending < EFX_MIN_RING_SIZE) {
+	if (ring->rx_pending < EFX_RXQ_MIN_ENT) {
 		netif_err(efx, drv, efx->net_dev,
-			  "TX and RX queues cannot be smaller than %ld\n",
-			  EFX_MIN_RING_SIZE);
+			  "RX queues cannot be smaller than %u\n",
+			  EFX_RXQ_MIN_ENT);
 		return -EINVAL;
 	}
 
-	return efx_realloc_channels(efx, ring->rx_pending, ring->tx_pending);
+	txq_entries = max(ring->tx_pending, EFX_TXQ_MIN_ENT(efx));
+	if (txq_entries != ring->tx_pending)
+		netif_warn(efx, drv, efx->net_dev,
+			   "increasing TX queue size to minimum of %u\n",
+			   txq_entries);
+
+	return efx_realloc_channels(efx, ring->rx_pending, txq_entries);
 }
 
 static int efx_ethtool_set_pauseparam(struct net_device *net_dev,
--- a/drivers/net/ethernet/sfc/nic.h
+++ b/drivers/net/ethernet/sfc/nic.h
@@ -65,6 +65,9 @@ enum {
 #define FALCON_GMAC_LOOPBACKS			\
 	(1 << LOOPBACK_GMAC)
 
+/* Alignment of PCIe DMA boundaries (4KB) */
+#define EFX_PAGE_SIZE	4096
+
 /**
  * struct falcon_board_type - board operations and type information
  * @id: Board type id, as found in NVRAM
--- a/drivers/net/ethernet/sfc/tx.c
+++ b/drivers/net/ethernet/sfc/tx.c
@@ -115,6 +115,25 @@ efx_max_tx_len(struct efx_nic *efx, dma_
 	return len;
 }
 
+unsigned int efx_tx_max_skb_descs(struct efx_nic *efx)
+{
+	/* Header and payload descriptor for each output segment, plus
+	 * one for every input fragment boundary within a segment
+	 */
+	unsigned int max_descs = EFX_TSO_MAX_SEGS * 2 + MAX_SKB_FRAGS;
+
+	/* Possibly one more per segment for the alignment workaround */
+	if (EFX_WORKAROUND_5391(efx))
+		max_descs += EFX_TSO_MAX_SEGS;
+
+	/* Possibly more for PCIe page boundaries within input fragments */
+	if (PAGE_SIZE > EFX_PAGE_SIZE)
+		max_descs += max_t(unsigned int, MAX_SKB_FRAGS,
+				   DIV_ROUND_UP(GSO_MAX_SIZE, EFX_PAGE_SIZE));
+
+	return max_descs;
+}
+
 /*
  * Add a socket buffer to a TX queue
  *

[ 050/135] tcp: Apply device TSO segment limit earlier

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commit 1485348d2424e1131ea42efc033cbd9366462b01 ]

Cache the device gso_max_segs in sock::sk_gso_max_segs and use it to
limit the size of TSO skbs.  This avoids the need to fall back to
software GSO for local TCP senders.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/net/sock.h    |  2 ++
 net/core/sock.c       |  1 +
 net/ipv4/tcp.c        |  4 +++-
 net/ipv4/tcp_cong.c   |  3 ++-
 net/ipv4/tcp_output.c | 21 ++++++++++++---------
 5 files changed, 20 insertions(+), 11 deletions(-)

diff --git a/include/net/sock.h b/include/net/sock.h
index 32e3937..ddf523c 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -194,6 +194,7 @@ struct sock_common {
   *	@sk_route_nocaps: forbidden route capabilities (e.g NETIF_F_GSO_MASK)
   *	@sk_gso_type: GSO type (e.g. %SKB_GSO_TCPV4)
   *	@sk_gso_max_size: Maximum GSO segment size to build
+  *	@sk_gso_max_segs: Maximum number of GSO segments
   *	@sk_lingertime: %SO_LINGER l_linger setting
   *	@sk_backlog: always used with the per-socket spinlock held
   *	@sk_callback_lock: used with the callbacks in the end of this struct
@@ -310,6 +311,7 @@ struct sock {
 	int			sk_route_nocaps;
 	int			sk_gso_type;
 	unsigned int		sk_gso_max_size;
+	u16			sk_gso_max_segs;
 	int			sk_rcvlowat;
 	unsigned long	        sk_lingertime;
 	struct sk_buff_head	sk_error_queue;
diff --git a/net/core/sock.c b/net/core/sock.c
index 8d095b9..018fd41 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1308,6 +1308,7 @@ void sk_setup_caps(struct sock *sk, struct dst_entry *dst)
 		} else {
 			sk->sk_route_caps |= NETIF_F_SG | NETIF_F_HW_CSUM;
 			sk->sk_gso_max_size = dst->dev->gso_max_size;
+			sk->sk_gso_max_segs = dst->dev->gso_max_segs;
 		}
 	}
 }
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index ad466a7..043d49b 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -740,7 +740,9 @@ static unsigned int tcp_xmit_size_goal(struct sock *sk, u32 mss_now,
 			   old_size_goal + mss_now > xmit_size_goal)) {
 			xmit_size_goal = old_size_goal;
 		} else {
-			tp->xmit_size_goal_segs = xmit_size_goal / mss_now;
+			tp->xmit_size_goal_segs =
+				min_t(u16, xmit_size_goal / mss_now,
+				      sk->sk_gso_max_segs);
 			xmit_size_goal = tp->xmit_size_goal_segs * mss_now;
 		}
 	}
diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c
index 850c737..6cebfd2 100644
--- a/net/ipv4/tcp_cong.c
+++ b/net/ipv4/tcp_cong.c
@@ -290,7 +290,8 @@ int tcp_is_cwnd_limited(const struct sock *sk, u32 in_flight)
 	left = tp->snd_cwnd - in_flight;
 	if (sk_can_gso(sk) &&
 	    left * sysctl_tcp_tso_win_divisor < tp->snd_cwnd &&
-	    left * tp->mss_cache < sk->sk_gso_max_size)
+	    left * tp->mss_cache < sk->sk_gso_max_size &&
+	    left < sk->sk_gso_max_segs)
 		return 1;
 	return left <= tcp_max_burst(tp);
 }
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index c51dd5b..921cbac 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1318,21 +1318,21 @@ static void tcp_cwnd_validate(struct sock *sk)
  * when we would be allowed to send the split-due-to-Nagle skb fully.
  */
 static unsigned int tcp_mss_split_point(const struct sock *sk, const struct sk_buff *skb,
-					unsigned int mss_now, unsigned int cwnd)
+					unsigned int mss_now, unsigned int max_segs)
 {
 	const struct tcp_sock *tp = tcp_sk(sk);
-	u32 needed, window, cwnd_len;
+	u32 needed, window, max_len;
 
 	window = tcp_wnd_end(tp) - TCP_SKB_CB(skb)->seq;
-	cwnd_len = mss_now * cwnd;
+	max_len = mss_now * max_segs;
 
-	if (likely(cwnd_len <= window && skb != tcp_write_queue_tail(sk)))
-		return cwnd_len;
+	if (likely(max_len <= window && skb != tcp_write_queue_tail(sk)))
+		return max_len;
 
 	needed = min(skb->len, window);
 
-	if (cwnd_len <= needed)
-		return cwnd_len;
+	if (max_len <= needed)
+		return max_len;
 
 	return needed - needed % mss_now;
 }
@@ -1560,7 +1560,8 @@ static int tcp_tso_should_defer(struct sock *sk, struct sk_buff *skb)
 	limit = min(send_win, cong_win);
 
 	/* If a full-sized TSO skb can be sent, do it. */
-	if (limit >= sk->sk_gso_max_size)
+	if (limit >= min_t(unsigned int, sk->sk_gso_max_size,
+			   sk->sk_gso_max_segs * tp->mss_cache))
 		goto send_now;
 
 	/* Middle in queue won't get any more data, full sendable already? */
@@ -1786,7 +1787,9 @@ static int tcp_write_xmit(struct sock *sk, unsigned int mss_now, int nonagle,
 		limit = mss_now;
 		if (tso_segs > 1 && !tcp_urg_mode(tp))
 			limit = tcp_mss_split_point(sk, skb, mss_now,
-						    cwnd_quota);
+						    min_t(unsigned int,
+							  cwnd_quota,
+							  sk->sk_gso_max_segs));
 
 		if (skb->len > limit &&
 		    unlikely(tso_fragment(sk, skb, limit, mss_now, gfp)))

[ 051/135] net_sched: gact: Fix potential panic in tcf_gact().

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>

[ Upstream commit 696ecdc10622d86541f2e35cc16e15b6b3b1b67e ]

gact_rand array is accessed by gact->tcfg_ptype whose value
is assumed to less than MAX_RAND, but any range checks are
not performed.

So add a check in tcf_gact_init(). And in tcf_gact(), we can
reduce a branch.

Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/sched/act_gact.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/net/sched/act_gact.c b/net/sched/act_gact.c
index b77f5a0..bdacd8d 100644
--- a/net/sched/act_gact.c
+++ b/net/sched/act_gact.c
@@ -67,6 +67,9 @@ static int tcf_gact_init(struct nlattr *nla, struct nlattr *est,
 	struct tcf_common *pc;
 	int ret = 0;
 	int err;
+#ifdef CONFIG_GACT_PROB
+	struct tc_gact_p *p_parm = NULL;
+#endif
 
 	if (nla == NULL)
 		return -EINVAL;
@@ -82,6 +85,12 @@ static int tcf_gact_init(struct nlattr *nla, struct nlattr *est,
 #ifndef CONFIG_GACT_PROB
 	if (tb[TCA_GACT_PROB] != NULL)
 		return -EOPNOTSUPP;
+#else
+	if (tb[TCA_GACT_PROB]) {
+		p_parm = nla_data(tb[TCA_GACT_PROB]);
+		if (p_parm->ptype >= MAX_RAND)
+			return -EINVAL;
+	}
 #endif
 
 	pc = tcf_hash_check(parm->index, a, bind, &gact_hash_info);
@@ -103,8 +112,7 @@ static int tcf_gact_init(struct nlattr *nla, struct nlattr *est,
 	spin_lock_bh(&gact->tcf_lock);
 	gact->tcf_action = parm->action;
 #ifdef CONFIG_GACT_PROB
-	if (tb[TCA_GACT_PROB] != NULL) {
-		struct tc_gact_p *p_parm = nla_data(tb[TCA_GACT_PROB]);
+	if (p_parm) {
 		gact->tcfg_paction = p_parm->paction;
 		gact->tcfg_pval    = p_parm->pval;
 		gact->tcfg_ptype   = p_parm->ptype;
@@ -133,7 +141,7 @@ static int tcf_gact(struct sk_buff *skb, const struct tc_action *a,
 
 	spin_lock(&gact->tcf_lock);
 #ifdef CONFIG_GACT_PROB
-	if (gact->tcfg_ptype && gact_rand[gact->tcfg_ptype] != NULL)
+	if (gact->tcfg_ptype)
 		action = gact_rand[gact->tcfg_ptype](gact);
 	else
 		action = gact->tcf_action;

[ 052/135] isdnloop: fix and simplify isdnloop_init()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wu Fengguang <fengguang.wu@intel.com>

[ Upstream commit 77f00f6324cb97cf1df6f9c4aaeea6ada23abdb2 ]

Fix a buffer overflow bug by removing the revision and printk.

[   22.016214] isdnloop-ISDN-driver Rev 1.11.6.7
[   22.097508] isdnloop: (loop0) virtual card added
[   22.174400] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff83244972
[   22.174400]
[   22.436157] Pid: 1, comm: swapper Not tainted 3.5.0-bisect-00018-gfa8bbb1-dirty #129
[   22.624071] Call Trace:
[   22.720558]  [<ffffffff832448c3>] ? CallcNew+0x56/0x56
[   22.815248]  [<ffffffff8222b623>] panic+0x110/0x329
[   22.914330]  [<ffffffff83244972>] ? isdnloop_init+0xaf/0xb1
[   23.014800]  [<ffffffff832448c3>] ? CallcNew+0x56/0x56
[   23.090763]  [<ffffffff8108e24b>] __stack_chk_fail+0x2b/0x30
[   23.185748]  [<ffffffff83244972>] isdnloop_init+0xaf/0xb1

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/isdn/isdnloop/isdnloop.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c
index d497db0..509135f 100644
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -16,7 +16,6 @@
 #include <linux/sched.h>
 #include "isdnloop.h"
 
-static char *revision = "$Revision: 1.11.6.7 $";
 static char *isdnloop_id = "loop0";
 
 MODULE_DESCRIPTION("ISDN4Linux: Pseudo Driver that simulates an ISDN card");
@@ -1494,17 +1493,6 @@ isdnloop_addcard(char *id1)
 static int __init
 isdnloop_init(void)
 {
-	char *p;
-	char rev[10];
-
-	if ((p = strchr(revision, ':'))) {
-		strcpy(rev, p + 1);
-		p = strchr(rev, '$');
-		*p = 0;
-	} else
-		strcpy(rev, " ??? ");
-	printk(KERN_NOTICE "isdnloop-ISDN-driver Rev%s\n", rev);
-
 	if (isdnloop_id)
 		return (isdnloop_addcard(isdnloop_id));
 

[ 053/135] pptp: lookup route with the proper net namespace

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gao feng <gaofeng@cn.fujitsu.com>

[ Upstream commit 08252b32311c3fa84219ad794d640af7399b5485 ]

pptp always use init_net as the net namespace to lookup
route, this will cause route lookup failed in container.

because we already set the correct net namespace to struct
sock in pptp_create,so fix this by using sock_net(sk) to
replace &init_net.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/ppp/pptp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c
index f8a6853..ad6a9d9 100644
--- a/drivers/net/ppp/pptp.c
+++ b/drivers/net/ppp/pptp.c
@@ -189,7 +189,7 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 	if (sk_pppox(po)->sk_state & PPPOX_DEAD)
 		goto tx_error;
 
-	rt = ip_route_output_ports(&init_net, &fl4, NULL,
+	rt = ip_route_output_ports(sock_net(sk), &fl4, NULL,
 				   opt->dst_addr.sin_addr.s_addr,
 				   opt->src_addr.sin_addr.s_addr,
 				   0, 0, IPPROTO_GRE,
@@ -468,7 +468,7 @@ static int pptp_connect(struct socket *sock, struct sockaddr *uservaddr,
 	po->chan.private = sk;
 	po->chan.ops = &pptp_chan_ops;
 
-	rt = ip_route_output_ports(&init_net, &fl4, sk,
+	rt = ip_route_output_ports(sock_net(sk), &fl4, sk,
 				   opt->dst_addr.sin_addr.s_addr,
 				   opt->src_addr.sin_addr.s_addr,
 				   0, 0,

[ 054/135] net/core: Fix potential memory leak in dev_set_alias()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

[ Upstream commit 7364e445f62825758fa61195d237a5b8ecdd06ec ]

Do not leak memory by updating pointer with potentially NULL realloc return value.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/core/dev.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index e6f2635..75da76d 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1059,6 +1059,8 @@ rollback:
  */
 int dev_set_alias(struct net_device *dev, const char *alias, size_t len)
 {
+	char *new_ifalias;
+
 	ASSERT_RTNL();
 
 	if (len >= IFALIASZ)
@@ -1072,9 +1074,10 @@ int dev_set_alias(struct net_device *dev, const char *alias, size_t len)
 		return 0;
 	}
 
-	dev->ifalias = krealloc(dev->ifalias, len + 1, GFP_KERNEL);
-	if (!dev->ifalias)
+	new_ifalias = krealloc(dev->ifalias, len + 1, GFP_KERNEL);
+	if (!new_ifalias)
 		return -ENOMEM;
+	dev->ifalias = new_ifalias;
 
 	strlcpy(dev->ifalias, alias, len+1);
 	return len;

[ 055/135] af_packet: remove BUG statement in tpacket_destruct_skb

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "danborkmann@iogearbox.net" <danborkmann@iogearbox.net>

[ Upstream commit 7f5c3e3a80e6654cf48dfba7cf94f88c6b505467 ]

Here's a quote of the comment about the BUG macro from asm-generic/bug.h:

 Don't use BUG() or BUG_ON() unless there's really no way out; one
 example might be detecting data structure corruption in the middle
 of an operation that can't be backed out of.  If the (sub)system
 can somehow continue operating, perhaps with reduced functionality,
 it's probably not BUG-worthy.

 If you're tempted to BUG(), think again:  is completely giving up
 really the *only* solution?  There are usually better options, where
 users don't need to reboot ASAP and can mostly shut down cleanly.

In our case, the status flag of a ring buffer slot is managed from both sides,
the kernel space and the user space. This means that even though the kernel
side might work as expected, the user space screws up and changes this flag
right between the send(2) is triggered when the flag is changed to
TP_STATUS_SENDING and a given skb is destructed after some time. Then, this
will hit the BUG macro. As David suggested, the best solution is to simply
remove this statement since it cannot be used for kernel side internal
consistency checks. I've tested it and the system still behaves /stable/ in
this case, so in accordance with the above comment, we should rather remove it.

Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/packet/af_packet.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index d9d4970..13b14dc 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1931,7 +1931,6 @@ static void tpacket_destruct_skb(struct sk_buff *skb)
 
 	if (likely(po->tx_ring.pg_vec)) {
 		ph = skb_shinfo(skb)->destructor_arg;
-		BUG_ON(__packet_get_status(po, ph) != TP_STATUS_SENDING);
 		BUG_ON(atomic_read(&po->tx_ring.pending) == 0);
 		atomic_dec(&po->tx_ring.pending);
 		__packet_set_status(po, ph, TP_STATUS_AVAILABLE);

[ 056/135] ipv6: addrconf: Avoid calling netdevice notifiers with RCU read-side lock

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commit 4acd4945cd1e1f92b20d14e349c6c6a52acbd42d ]

Cong Wang reports that lockdep detected suspicious RCU usage while
enabling IPV6 forwarding:

 [ 1123.310275] ===============================
 [ 1123.442202] [ INFO: suspicious RCU usage. ]
 [ 1123.558207] 3.6.0-rc1+ #109 Not tainted
 [ 1123.665204] -------------------------------
 [ 1123.768254] include/linux/rcupdate.h:430 Illegal context switch in RCU read-side critical section!
 [ 1123.992320]
 [ 1123.992320] other info that might help us debug this:
 [ 1123.992320]
 [ 1124.307382]
 [ 1124.307382] rcu_scheduler_active = 1, debug_locks = 0
 [ 1124.522220] 2 locks held by sysctl/5710:
 [ 1124.648364]  #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff81768498>] rtnl_trylock+0x15/0x17
 [ 1124.882211]  #1:  (rcu_read_lock){.+.+.+}, at: [<ffffffff81871df8>] rcu_lock_acquire+0x0/0x29
 [ 1125.085209]
 [ 1125.085209] stack backtrace:
 [ 1125.332213] Pid: 5710, comm: sysctl Not tainted 3.6.0-rc1+ #109
 [ 1125.441291] Call Trace:
 [ 1125.545281]  [<ffffffff8109d915>] lockdep_rcu_suspicious+0x109/0x112
 [ 1125.667212]  [<ffffffff8107c240>] rcu_preempt_sleep_check+0x45/0x47
 [ 1125.781838]  [<ffffffff8107c260>] __might_sleep+0x1e/0x19b
[...]
 [ 1127.445223]  [<ffffffff81757ac5>] call_netdevice_notifiers+0x4a/0x4f
[...]
 [ 1127.772188]  [<ffffffff8175e125>] dev_disable_lro+0x32/0x6b
 [ 1127.885174]  [<ffffffff81872d26>] dev_forward_change+0x30/0xcb
 [ 1128.013214]  [<ffffffff818738c4>] addrconf_forward_change+0x85/0xc5
[...]

addrconf_forward_change() uses RCU iteration over the netdev list,
which is unnecessary since it already holds the RTNL lock.  We also
cannot reasonably require netdevice notifier functions not to sleep.

Reported-by: Cong Wang <amwang@redhat.com>
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/ipv6/addrconf.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index a5521c5..aef80d7 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -493,8 +493,7 @@ static void addrconf_forward_change(struct net *net, __s32 newf)
 	struct net_device *dev;
 	struct inet6_dev *idev;
 
-	rcu_read_lock();
-	for_each_netdev_rcu(net, dev) {
+	for_each_netdev(net, dev) {
 		idev = __in6_dev_get(dev);
 		if (idev) {
 			int changed = (!idev->cnf.forwarding) ^ (!newf);
@@ -503,7 +502,6 @@ static void addrconf_forward_change(struct net *net, __s32 newf)
 				dev_forward_change(idev);
 		}
 	}
-	rcu_read_unlock();
 }
 
 static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)

[ 057/135] atm: fix info leak in getsockopt(SO_ATMPVC)

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit e862f1a9b7df4e8196ebec45ac62295138aa3fc2 ]

The ATM code fails to initialize the two padding bytes of struct
sockaddr_atmpvc inserted for alignment. Add an explicit memset(0)
before filling the structure to avoid the info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/atm/common.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/atm/common.c b/net/atm/common.c
index 14ff9fe..0ca06e8 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -784,6 +784,7 @@ int vcc_getsockopt(struct socket *sock, int level, int optname,
 
 		if (!vcc->dev || !test_bit(ATM_VF_ADDR, &vcc->flags))
 			return -ENOTCONN;
+		memset(&pvc, 0, sizeof(pvc));
 		pvc.sap_family = AF_ATMPVC;
 		pvc.sap_addr.itf = vcc->dev->number;
 		pvc.sap_addr.vpi = vcc->vpi;

[ 058/135] atm: fix info leak via getsockname()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit 3c0c5cfdcd4d69ffc4b9c0907cec99039f30a50a ]

The ATM code fails to initialize the two padding bytes of struct
sockaddr_atmpvc inserted for alignment. Add an explicit memset(0)
before filling the structure to avoid the info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/atm/pvc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/atm/pvc.c b/net/atm/pvc.c
index 3a73491..ae03240 100644
--- a/net/atm/pvc.c
+++ b/net/atm/pvc.c
@@ -95,6 +95,7 @@ static int pvc_getname(struct socket *sock, struct sockaddr *sockaddr,
 		return -ENOTCONN;
 	*sockaddr_len = sizeof(struct sockaddr_atmpvc);
 	addr = (struct sockaddr_atmpvc *)sockaddr;
+	memset(addr, 0, sizeof(*addr));
 	addr->sap_family = AF_ATMPVC;
 	addr->sap_addr.itf = vcc->dev->number;
 	addr->sap_addr.vpi = vcc->vpi;

[ 059/135] Bluetooth: HCI - Fix info leak in getsockopt(HCI_FILTER)

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit e15ca9a0ef9a86f0477530b0f44a725d67f889ee ]

The HCI code fails to initialize the two padding bytes of struct
hci_ufilter before copying it to userland -- that for leaking two
bytes kernel stack. Add an explicit memset(0) before filling the
structure to avoid the info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/bluetooth/hci_sock.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index f6afe3d..e4c8bc0 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -671,6 +671,7 @@ static int hci_sock_getsockopt(struct socket *sock, int level, int optname, char
 		{
 			struct hci_filter *f = &hci_pi(sk)->filter;
 
+			memset(&uf, 0, sizeof(uf));
 			uf.type_mask = f->type_mask;
 			uf.opcode    = f->opcode;
 			uf.event_mask[0] = *((u32 *) f->event_mask + 0);

[ 060/135] Bluetooth: HCI - Fix info leak via getsockname()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit 3f68ba07b1da811bf383b4b701b129bfcb2e4988 ]

The HCI code fails to initialize the hci_channel member of struct
sockaddr_hci and that for leaks two bytes kernel stack via the
getsockname() syscall. Initialize hci_channel with 0 to avoid the
info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/bluetooth/hci_sock.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index e4c8bc0..8361ee4 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -388,6 +388,7 @@ static int hci_sock_getname(struct socket *sock, struct sockaddr *addr, int *add
 	*addr_len = sizeof(*haddr);
 	haddr->hci_family = AF_BLUETOOTH;
 	haddr->hci_dev    = hdev->id;
+	haddr->hci_channel= 0;
 
 	release_sock(sk);
 	return 0;

[ 061/135] Bluetooth: RFCOMM - Fix info leak in getsockopt(BT_SECURITY)

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit 9ad2de43f1aee7e7274a4e0d41465489299e344b ]

The RFCOMM code fails to initialize the key_size member of struct
bt_security before copying it to userland -- that for leaking one
byte kernel stack. Initialize key_size with 0 to avoid the info
leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/bluetooth/rfcomm/sock.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 5417f61..03584bc 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -835,6 +835,7 @@ static int rfcomm_sock_getsockopt(struct socket *sock, int level, int optname, c
 		}
 
 		sec.level = rfcomm_pi(sk)->sec_level;
+		sec.key_size = 0;
 
 		len = min_t(unsigned int, len, sizeof(sec));
 		if (copy_to_user(optval, (char *) &sec, len))

[ 062/135] Bluetooth: RFCOMM - Fix info leak in ioctl(RFCOMMGETDEVLIST)

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit f9432c5ec8b1e9a09b9b0e5569e3c73db8de432a ]

The RFCOMM code fails to initialize the two padding bytes of struct
rfcomm_dev_list_req inserted for alignment before copying it to
userland. Additionally there are two padding bytes in each instance of
struct rfcomm_dev_info. The ioctl() that for disclosures two bytes plus
dev_num times two bytes uninitialized kernel heap memory.

Allocate the memory using kzalloc() to fix this issue.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/bluetooth/rfcomm/tty.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index c258796..bc1eb56 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -471,7 +471,7 @@ static int rfcomm_get_dev_list(void __user *arg)
 
 	size = sizeof(*dl) + dev_num * sizeof(*di);
 
-	dl = kmalloc(size, GFP_KERNEL);
+	dl = kzalloc(size, GFP_KERNEL);
 	if (!dl)
 		return -ENOMEM;
 

[ 063/135] Bluetooth: RFCOMM - Fix info leak via getsockname()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit 9344a972961d1a6d2c04d9008b13617bcb6ec2ef ]

The RFCOMM code fails to initialize the trailing padding byte of struct
sockaddr_rc added for alignment. It that for leaks one byte kernel stack
via the getsockname() syscall. Add an explicit memset(0) before filling
the structure to avoid the info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/bluetooth/rfcomm/sock.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 03584bc..7ee4ead 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -547,6 +547,7 @@ static int rfcomm_sock_getname(struct socket *sock, struct sockaddr *addr, int *
 
 	BT_DBG("sock %p, sk %p", sock, sk);
 
+	memset(sa, 0, sizeof(*sa));
 	sa->rc_family  = AF_BLUETOOTH;
 	sa->rc_channel = rfcomm_pi(sk)->channel;
 	if (peer)

[ 064/135] Bluetooth: L2CAP - Fix info leak via getsockname()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit 792039c73cf176c8e39a6e8beef2c94ff46522ed ]

The L2CAP code fails to initialize the l2_bdaddr_type member of struct
sockaddr_l2 and the padding byte added for alignment. It that for leaks
two bytes kernel stack via the getsockname() syscall. Add an explicit
memset(0) before filling the structure to avoid the info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/bluetooth/l2cap_sock.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 5c406d3..6dedd6f 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -293,6 +293,7 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr, int *l
 
 	BT_DBG("sock %p, sk %p", sock, sk);
 
+	memset(la, 0, sizeof(struct sockaddr_l2));
 	addr->sa_family = AF_BLUETOOTH;
 	*len = sizeof(struct sockaddr_l2);
 

[ 065/135] llc: fix info leak via getsockname()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit 3592aaeb80290bda0f2cf0b5456c97bfc638b192 ]

The LLC code wrongly returns 0, i.e. "success", when the socket is
zapped. Together with the uninitialized uaddrlen pointer argument from
sys_getsockname this leads to an arbitrary memory leak of up to 128
bytes kernel stack via the getsockname() syscall.

Return an error instead when the socket is zapped to prevent the info
leak. Also remove the unnecessary memset(0). We don't directly write to
the memory pointed by uaddr but memcpy() a local structure at the end of
the function that is properly initialized.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/llc/af_llc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index a18e6c3..99a60d5 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -966,14 +966,13 @@ static int llc_ui_getname(struct socket *sock, struct sockaddr *uaddr,
 	struct sockaddr_llc sllc;
 	struct sock *sk = sock->sk;
 	struct llc_sock *llc = llc_sk(sk);
-	int rc = 0;
+	int rc = -EBADF;
 
 	memset(&sllc, 0, sizeof(sllc));
 	lock_sock(sk);
 	if (sock_flag(sk, SOCK_ZAPPED))
 		goto out;
 	*uaddrlen = sizeof(sllc);
-	memset(uaddr, 0, *uaddrlen);
 	if (peer) {
 		rc = -ENOTCONN;
 		if (sk->sk_state != TCP_ESTABLISHED)

[ 066/135] dccp: fix info leak via getsockopt(DCCP_SOCKOPT_CCID_TX_INFO)

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit 7b07f8eb75aa3097cdfd4f6eac3da49db787381d ]

The CCID3 code fails to initialize the trailing padding bytes of struct
tfrc_tx_info added for alignment on 64 bit architectures. It that for
potentially leaks four bytes kernel stack via the getsockopt() syscall.
Add an explicit memset(0) before filling the structure to avoid the
info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/dccp/ccids/ccid3.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index 3d604e1..4caf63f 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -532,6 +532,7 @@ static int ccid3_hc_tx_getsockopt(struct sock *sk, const int optname, int len,
 	case DCCP_SOCKOPT_CCID_TX_INFO:
 		if (len < sizeof(tfrc))
 			return -EINVAL;
+		memset(&tfrc, 0, sizeof(tfrc));
 		tfrc.tfrctx_x	   = hc->tx_x;
 		tfrc.tfrctx_x_recv = hc->tx_x_recv;
 		tfrc.tfrctx_x_calc = hc->tx_x_calc;

[ 067/135] ipvs: fix info leak in getsockopt(IP_VS_SO_GET_TIMEOUT)

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit 2d8a041b7bfe1097af21441cb77d6af95f4f4680 ]

If at least one of CONFIG_IP_VS_PROTO_TCP or CONFIG_IP_VS_PROTO_UDP is
not set, __ip_vs_get_timeouts() does not fully initialize the structure
that gets copied to userland and that for leaks up to 12 bytes of kernel
stack. Add an explicit memset(0) before passing the structure to
__ip_vs_get_timeouts() to avoid the info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Wensong Zhang <wensong@linux-vs.org>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/netfilter/ipvs/ip_vs_ctl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index e1a66cf..72f4253 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2713,6 +2713,7 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len)
 	{
 		struct ip_vs_timeout_user t;
 
+		memset(&t, 0, sizeof(t));
 		__ip_vs_get_timeouts(net, &t);
 		if (copy_to_user(user, &t, sizeof(t)) != 0)
 			ret = -EFAULT;

[ 068/135] net: fix info leak in compat dev_ifconf()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

[ Upstream commit 43da5f2e0d0c69ded3d51907d9552310a6b545e8 ]

The implementation of dev_ifconf() for the compat ioctl interface uses
an intermediate ifc structure allocated in userland for the duration of
the syscall. Though, it fails to initialize the padding bytes inserted
for alignment and that for leaks four bytes of kernel stack. Add an
explicit memset(0) before filling the structure to avoid the info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/socket.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/socket.c b/net/socket.c
index 273cbce..68879db 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -2645,6 +2645,7 @@ static int dev_ifconf(struct net *net, struct compat_ifconf __user *uifc32)
 	if (copy_from_user(&ifc32, uifc32, sizeof(struct compat_ifconf)))
 		return -EFAULT;
 
+	memset(&ifc, 0, sizeof(ifc));
 	if (ifc32.ifcbuf == 0) {
 		ifc32.ifc_len = 0;
 		ifc.ifc_len = 0;

[ 069/135] af_packet: dont emit packet on orig fanout group

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Leblond <eric@regit.org>

[ Upstream commit c0de08d04215031d68fa13af36f347a6cfa252ca ]

If a packet is emitted on one socket in one group of fanout sockets,
it is transmitted again. It is thus read again on one of the sockets
of the fanout group. This result in a loop for software which
generate packets when receiving one.
This retransmission is not the intended behavior: a fanout group
must behave like a single socket. The packet should not be
transmitted on a socket if it originates from a socket belonging
to the same fanout group.

This patch fixes the issue by changing the transmission check to
take fanout group info account.

Reported-by: Aleksandr Kotov <a1k@mail.ru>
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/netdevice.h |  2 ++
 net/core/dev.c            | 16 ++++++++++++++--
 net/packet/af_packet.c    |  9 +++++++++
 3 files changed, 25 insertions(+), 2 deletions(-)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index d178fb8..00ca32b 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1513,6 +1513,8 @@ struct packet_type {
 	struct sk_buff		**(*gro_receive)(struct sk_buff **head,
 					       struct sk_buff *skb);
 	int			(*gro_complete)(struct sk_buff *skb);
+	bool			(*id_match)(struct packet_type *ptype,
+					    struct sock *sk);
 	void			*af_packet_priv;
 	struct list_head	list;
 };
diff --git a/net/core/dev.c b/net/core/dev.c
index 75da76d..832ba6d 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1631,6 +1631,19 @@ static inline int deliver_skb(struct sk_buff *skb,
 	return pt_prev->func(skb, skb->dev, pt_prev, orig_dev);
 }
 
+static inline bool skb_loop_sk(struct packet_type *ptype, struct sk_buff *skb)
+{
+	if (ptype->af_packet_priv == NULL)
+		return false;
+
+	if (ptype->id_match)
+		return ptype->id_match(ptype, skb->sk);
+	else if ((struct sock *)ptype->af_packet_priv == skb->sk)
+		return true;
+
+	return false;
+}
+
 /*
  *	Support routine. Sends outgoing frames to any network
  *	taps currently in use.
@@ -1648,8 +1661,7 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
 		 * they originated from - MvS (miquels@drinkel.ow.org)
 		 */
 		if ((ptype->dev == dev || !ptype->dev) &&
-		    (ptype->af_packet_priv == NULL ||
-		     (struct sock *)ptype->af_packet_priv != skb->sk)) {
+		    (!skb_loop_sk(ptype, skb))) {
 			if (pt_prev) {
 				deliver_skb(skb2, pt_prev, skb->dev);
 				pt_prev = ptype;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 13b14dc..85afc13 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1281,6 +1281,14 @@ static void __fanout_unlink(struct sock *sk, struct packet_sock *po)
 	spin_unlock(&f->lock);
 }
 
+bool match_fanout_group(struct packet_type *ptype, struct sock * sk)
+{
+	if (ptype->af_packet_priv == (void*)((struct packet_sock *)sk)->fanout)
+		return true;
+
+	return false;
+}
+
 static int fanout_add(struct sock *sk, u16 id, u16 type_flags)
 {
 	struct packet_sock *po = pkt_sk(sk);
@@ -1333,6 +1341,7 @@ static int fanout_add(struct sock *sk, u16 id, u16 type_flags)
 		match->prot_hook.dev = po->prot_hook.dev;
 		match->prot_hook.func = packet_rcv_fanout;
 		match->prot_hook.af_packet_priv = match;
+		match->prot_hook.id_match = match_fanout_group;
 		dev_add_pack(&match->prot_hook);
 		list_add(&match->list, &fanout_list);
 	}

[ 070/135] af_netlink: force credentials passing [CVE-2012-3520]

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit e0e3cea46d31d23dc40df0a49a7a2c04fe8edfea ]

Pablo Neira Ayuso discovered that avahi and
potentially NetworkManager accept spoofed Netlink messages because of a
kernel bug.  The kernel passes all-zero SCM_CREDENTIALS ancillary data
to the receiver if the sender did not provide such data, instead of not
including any such data at all or including the correct data from the
peer (as it is the case with AF_UNIX).

This bug was introduced in commit 16e572626961
(af_unix: dont send SCM_CREDENTIALS by default)

This patch forces passing credentials for netlink, as
before the regression.

Another fix would be to not add SCM_CREDENTIALS in
netlink messages if not provided by the sender, but it
might break some programs.

With help from Florian Weimer & Petr Matousek

This issue is designated as CVE-2012-3520

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/net/scm.h        | 4 +++-
 net/netlink/af_netlink.c | 2 +-
 net/unix/af_unix.c       | 4 ++--
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/include/net/scm.h b/include/net/scm.h
index d456f4c..0c0017c 100644
--- a/include/net/scm.h
+++ b/include/net/scm.h
@@ -71,9 +71,11 @@ static __inline__ void scm_destroy(struct scm_cookie *scm)
 }
 
 static __inline__ int scm_send(struct socket *sock, struct msghdr *msg,
-			       struct scm_cookie *scm)
+			       struct scm_cookie *scm, bool forcecreds)
 {
 	memset(scm, 0, sizeof(*scm));
+	if (forcecreds)
+		scm_set_cred(scm, task_tgid(current), current_cred());
 	unix_get_peersec_dgram(sock, scm);
 	if (msg->msg_controllen <= 0)
 		return 0;
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index a99fb41..1af8542 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1333,7 +1333,7 @@ static int netlink_sendmsg(struct kiocb *kiocb, struct socket *sock,
 	if (NULL == siocb->scm)
 		siocb->scm = &scm;
 
-	err = scm_send(sock, msg, siocb->scm);
+	err = scm_send(sock, msg, siocb->scm, true);
 	if (err < 0)
 		return err;
 
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index d99678a..317bfe3 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1435,7 +1435,7 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock,
 	if (NULL == siocb->scm)
 		siocb->scm = &tmp_scm;
 	wait_for_unix_gc();
-	err = scm_send(sock, msg, siocb->scm);
+	err = scm_send(sock, msg, siocb->scm, false);
 	if (err < 0)
 		return err;
 
@@ -1596,7 +1596,7 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock,
 	if (NULL == siocb->scm)
 		siocb->scm = &tmp_scm;
 	wait_for_unix_gc();
-	err = scm_send(sock, msg, siocb->scm);
+	err = scm_send(sock, msg, siocb->scm, false);
 	if (err < 0)
 		return err;
 

[ 071/135] netlink: fix possible spoofing from non-root processes

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 20e1db19db5d6b9e4e83021595eab0dc8f107bef ]

Non-root user-space processes can send Netlink messages to other
processes that are well-known for being subscribed to Netlink
asynchronous notifications. This allows ilegitimate non-root
process to send forged messages to Netlink subscribers.

The userspace process usually verifies the legitimate origin in
two ways:

a) Socket credentials. If UID != 0, then the message comes from
   some ilegitimate process and the message needs to be dropped.

b) Netlink portID. In general, portID == 0 means that the origin
   of the messages comes from the kernel. Thus, discarding any
   message not coming from the kernel.

However, ctnetlink sets the portID in event messages that has
been triggered by some user-space process, eg. conntrack utility.
So other processes subscribed to ctnetlink events, eg. conntrackd,
know that the event was triggered by some user-space action.

Neither of the two ways to discard ilegitimate messages coming
from non-root processes can help for ctnetlink.

This patch adds capability validation in case that dst_pid is set
in netlink_sendmsg(). This approach is aggressive since existing
applications using any Netlink bus to deliver messages between
two user-space processes will break. Note that the exception is
NETLINK_USERSOCK, since it is reserved for netlink-to-netlink
userspace communication.

Still, if anyone wants that his Netlink bus allows netlink-to-netlink
userspace, then they can set NL_NONROOT_SEND. However, by default,
I don't think it makes sense to allow to use NETLINK_ROUTE to
communicate two processes that are sending no matter what information
that is not related to link/neighbouring/routing. They should be using
NETLINK_USERSOCK instead for that.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/netlink/af_netlink.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 1af8542..38b78b9 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1344,7 +1344,8 @@ static int netlink_sendmsg(struct kiocb *kiocb, struct socket *sock,
 		dst_pid = addr->nl_pid;
 		dst_group = ffs(addr->nl_groups);
 		err =  -EPERM;
-		if (dst_group && !netlink_capable(sock, NL_NONROOT_SEND))
+		if ((dst_group || dst_pid) &&
+		    !netlink_capable(sock, NL_NONROOT_SEND))
 			goto out;
 	} else {
 		dst_pid = nlk->dst_pid;
@@ -2103,6 +2104,7 @@ static void __init netlink_add_usersock_entry(void)
 	rcu_assign_pointer(nl_table[NETLINK_USERSOCK].listeners, listeners);
 	nl_table[NETLINK_USERSOCK].module = THIS_MODULE;
 	nl_table[NETLINK_USERSOCK].registered = 1;
+	nl_table[NETLINK_USERSOCK].nl_nonroot = NL_NONROOT_SEND;
 
 	netlink_table_ungrab();
 }

[ 072/135] gianfar: fix default tx vlan offload feature flag

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Claudiu Manoil <claudiu.manoil@freescale.com>

[ Upstream commit e2c53be223aca36cf93eb6a0f6bafa079e78f52b ]

Commit -
"b852b72 gianfar: fix bug caused by
87c288c6e9aa31720b72e2bc2d665e24e1653c3e"
disables by default (on mac init) the hw vlan tag insertion.
The "features" flags were not updated to reflect this, and
"ethtool -K" shows tx-vlan-offload to be "on" by default.

Cc: Sebastian Poehn <sebastian.poehn@belden.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/ethernet/freescale/gianfar.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 83199fd..d0722a7 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1041,7 +1041,7 @@ static int gfar_probe(struct platform_device *ofdev)
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) {
 		dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-		dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+		dev->features |= NETIF_F_HW_VLAN_RX;
 	}
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) {

[ 073/135] l2tp: avoid to use synchronize_rcu in tunnel free function

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "xeb@mail.ru" <xeb@mail.ru>

[ Upstream commit 99469c32f79a32d8481f87be0d3c66dad286f4ec ]

Avoid to use synchronize_rcu in l2tp_tunnel_free because context may be
atomic.

Signed-off-by: Dmitry Kozlov <xeb@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/l2tp/l2tp_core.c | 3 +--
 net/l2tp/l2tp_core.h | 1 +
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index 89ff8c6..7501b22 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1253,11 +1253,10 @@ static void l2tp_tunnel_free(struct l2tp_tunnel *tunnel)
 	/* Remove from tunnel list */
 	spin_lock_bh(&pn->l2tp_tunnel_list_lock);
 	list_del_rcu(&tunnel->list);
+	kfree_rcu(tunnel, rcu);
 	spin_unlock_bh(&pn->l2tp_tunnel_list_lock);
-	synchronize_rcu();
 
 	atomic_dec(&l2tp_tunnel_count);
-	kfree(tunnel);
 }
 
 /* Create a socket for the tunnel, if one isn't set up by
diff --git a/net/l2tp/l2tp_core.h b/net/l2tp/l2tp_core.h
index a16a48e..4393794 100644
--- a/net/l2tp/l2tp_core.h
+++ b/net/l2tp/l2tp_core.h
@@ -157,6 +157,7 @@ struct l2tp_tunnel_cfg {
 
 struct l2tp_tunnel {
 	int			magic;		/* Should be L2TP_TUNNEL_MAGIC */
+	struct rcu_head rcu;
 	rwlock_t		hlist_lock;	/* protect session_hlist */
 	struct hlist_head	session_hlist[L2TP_HASH_SIZE];
 						/* hashed list of sessions,

[ 074/135] net: ipv4: ipmr_expire_timer causes crash when removing net namespace

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Francesco Ruggeri <fruggeri@aristanetworks.com>

[ Upstream commit acbb219d5f53821b2d0080d047800410c0420ea1 ]

When tearing down a net namespace, ipv4 mr_table structures are freed
without first deactivating their timers. This can result in a crash in
run_timer_softirq.
This patch mimics the corresponding behaviour in ipv6.
Locking and synchronization seem to be adequate.
We are about to kfree mrt, so existing code should already make sure that
no other references to mrt are pending or can be created by incoming traffic.
The functions invoked here do not cause new references to mrt or other
race conditions to be created.
Invoking del_timer_sync guarantees that ipmr_expire_timer is inactive.
Both ipmr_expire_process (whose completion we may have to wait in
del_timer_sync) and mroute_clean_tables internally use mfc_unres_lock
or other synchronizations when needed, and they both only modify mrt.

Tested in Linux 3.4.8.

Signed-off-by: Francesco Ruggeri <fruggeri@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/ipv4/ipmr.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index d2aae27..0064394 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -125,6 +125,8 @@ static DEFINE_SPINLOCK(mfc_unres_lock);
 static struct kmem_cache *mrt_cachep __read_mostly;
 
 static struct mr_table *ipmr_new_table(struct net *net, u32 id);
+static void ipmr_free_table(struct mr_table *mrt);
+
 static int ip_mr_forward(struct net *net, struct mr_table *mrt,
 			 struct sk_buff *skb, struct mfc_cache *cache,
 			 int local);
@@ -132,6 +134,7 @@ static int ipmr_cache_report(struct mr_table *mrt,
 			     struct sk_buff *pkt, vifi_t vifi, int assert);
 static int __ipmr_fill_mroute(struct mr_table *mrt, struct sk_buff *skb,
 			      struct mfc_cache *c, struct rtmsg *rtm);
+static void mroute_clean_tables(struct mr_table *mrt);
 static void ipmr_expire_process(unsigned long arg);
 
 #ifdef CONFIG_IP_MROUTE_MULTIPLE_TABLES
@@ -272,7 +275,7 @@ static void __net_exit ipmr_rules_exit(struct net *net)
 
 	list_for_each_entry_safe(mrt, next, &net->ipv4.mr_tables, list) {
 		list_del(&mrt->list);
-		kfree(mrt);
+		ipmr_free_table(mrt);
 	}
 	fib_rules_unregister(net->ipv4.mr_rules_ops);
 }
@@ -300,7 +303,7 @@ static int __net_init ipmr_rules_init(struct net *net)
 
 static void __net_exit ipmr_rules_exit(struct net *net)
 {
-	kfree(net->ipv4.mrt);
+	ipmr_free_table(net->ipv4.mrt);
 }
 #endif
 
@@ -337,6 +340,13 @@ static struct mr_table *ipmr_new_table(struct net *net, u32 id)
 	return mrt;
 }
 
+static void ipmr_free_table(struct mr_table *mrt)
+{
+	del_timer_sync(&mrt->ipmr_expire_timer);
+	mroute_clean_tables(mrt);
+	kfree(mrt);
+}
+
 /* Service routines creating virtual interfaces: DVMRP tunnels and PIMREG */
 
 static void ipmr_del_tunnel(struct net_device *dev, struct vifctl *v)

[ 075/135] bnx2x: fix 57840_MF pci id

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yuval Mintz <yuvalmin@broadcom.com>

[ Upstream commit 5c879d2094946081af934739850c7260e8b25d3c ]

Commit c3def943c7117d42caaed3478731ea7c3c87190e have added support for
new pci ids of the 57840 board, while failing to change the obsolete value
in 'pci_ids.h'.
This patch does so, allowing the probe of such devices.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/pci_ids.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 2aaee0c..67cc215 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2124,7 +2124,7 @@
 #define PCI_DEVICE_ID_TIGON3_5704S	0x16a8
 #define PCI_DEVICE_ID_NX2_57800_VF	0x16a9
 #define PCI_DEVICE_ID_NX2_5706S		0x16aa
-#define PCI_DEVICE_ID_NX2_57840_MF	0x16ab
+#define PCI_DEVICE_ID_NX2_57840_MF	0x16a4
 #define PCI_DEVICE_ID_NX2_5708S		0x16ac
 #define PCI_DEVICE_ID_NX2_57840_VF	0x16ad
 #define PCI_DEVICE_ID_NX2_57810_MF	0x16ae

[ 076/135] workqueue: UNBOUND -> REBIND morphing in rebind_workers() should be atomic

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lai Jiangshan <laijs@cn.fujitsu.com>

commit 96e65306b81351b656835c15931d1d237b252f27 upstream.

The compiler may compile the following code into TWO write/modify
instructions.

	worker->flags &= ~WORKER_UNBOUND;
	worker->flags |= WORKER_REBIND;

so the other CPU may temporarily see worker->flags which doesn't have
either WORKER_UNBOUND or WORKER_REBIND set and perform local wakeup
prematurely.

Fix it by using single explicit assignment via ACCESS_ONCE().

Because idle workers have another WORKER_NOT_RUNNING flag, this bug
doesn't exist for them; however, update it to use the same pattern for
consistency.

tj: Applied the change to idle workers too and updated comments and
    patch description a bit.

stable: Idle worker rebinding doesn't apply for -stable and
        WORKER_UNBOUND used to be WORKER_ROGUE.  Updated accordingly.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 kernel/workqueue.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 9a3128d..d7eb05a 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -3441,14 +3441,17 @@ static int __cpuinit trustee_thread(void *__gcwq)
 
 	for_each_busy_worker(worker, i, pos, gcwq) {
 		struct work_struct *rebind_work = &worker->rebind_work;
+		unsigned long worker_flags = worker->flags;
 
 		/*
 		 * Rebind_work may race with future cpu hotplug
 		 * operations.  Use a separate flag to mark that
-		 * rebinding is scheduled.
+		 * rebinding is scheduled.  The morphing should
+		 * be atomic.
 		 */
-		worker->flags |= WORKER_REBIND;
-		worker->flags &= ~WORKER_ROGUE;
+		worker_flags |= WORKER_REBIND;
+		worker_flags &= ~WORKER_ROGUE;
+		ACCESS_ONCE(worker->flags) = worker_flags;
 
 		/* queue rebind_work, wq doesn't matter, use the default one */
 		if (test_and_set_bit(WORK_STRUCT_PENDING_BIT,

[ 077/135] fixing dmi match for hp t5745 and hp st5747 thin client

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Gariepy <mgariepy@ubuntu.com>

commit 62004978df3898649e152751eb6ac264a323ec36 upstream.

Match the correct information which is DMI_PRODUCT_NAME instead of DMI_BOARD_NAME
See dmidecode information on launchpad for both thin client:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/911920
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/911916

Signed-off-by: Marc Gariepy <mgariepy@ubuntu.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/i915/intel_lvds.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 30e2c82..9c71183 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -750,7 +750,7 @@ static const struct dmi_system_id intel_no_lvds[] = {
 		.ident = "Hewlett-Packard t5745",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_BOARD_NAME, "hp t5745"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "hp t5745"),
 		},
 	},
 	{
@@ -758,7 +758,7 @@ static const struct dmi_system_id intel_no_lvds[] = {
 		.ident = "Hewlett-Packard st5747",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_BOARD_NAME, "hp st5747"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "hp st5747"),
 		},
 	},
 	{

[ 078/135] time: Improve sanity checking of timekeeping inputs

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

This is a -stable backport of 4e8b14526ca7fb046a81c94002c1c43b6fdf0e9b

Unexpected behavior could occur if the time is set to a value large
enough to overflow a 64bit ktime_t (which is something larger then the
year 2262).

Also unexpected behavior could occur if large negative offsets are
injected via adjtimex.

So this patch improves the sanity check timekeeping inputs by
improving the timespec_valid() check, and then makes better use of
timespec_valid() to make sure we don't set the time to an invalid
negative value or one that overflows ktime_t.

Note: This does not protect from setting the time close to overflowing
ktime_t and then letting natural accumulation cause the overflow.

Reported-by: CAI Qian <caiqian@redhat.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344454580-17031-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
 include/linux/ktime.h     |    7 -------
 include/linux/time.h      |   22 ++++++++++++++++++++--
 kernel/time/timekeeping.c |   26 ++++++++++++++++++++++++--
 3 files changed, 44 insertions(+), 11 deletions(-)

--- a/include/linux/ktime.h
+++ b/include/linux/ktime.h
@@ -58,13 +58,6 @@ union ktime {
 
 typedef union ktime ktime_t;		/* Kill this */
 
-#define KTIME_MAX			((s64)~((u64)1 << 63))
-#if (BITS_PER_LONG == 64)
-# define KTIME_SEC_MAX			(KTIME_MAX / NSEC_PER_SEC)
-#else
-# define KTIME_SEC_MAX			LONG_MAX
-#endif
-
 /*
  * ktime_t definitions when using the 64-bit scalar representation:
  */
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -107,11 +107,29 @@ static inline struct timespec timespec_s
 	return ts_delta;
 }
 
+#define KTIME_MAX			((s64)~((u64)1 << 63))
+#if (BITS_PER_LONG == 64)
+# define KTIME_SEC_MAX			(KTIME_MAX / NSEC_PER_SEC)
+#else
+# define KTIME_SEC_MAX			LONG_MAX
+#endif
+
 /*
  * Returns true if the timespec is norm, false if denorm:
  */
-#define timespec_valid(ts) \
-	(((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC))
+static inline bool timespec_valid(const struct timespec *ts)
+{
+	/* Dates before 1970 are bogus */
+	if (ts->tv_sec < 0)
+		return false;
+	/* Can't have more nanoseconds then a second */
+	if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
+		return false;
+	/* Disallow values that could overflow ktime_t */
+	if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX)
+		return false;
+	return true;
+}
 
 extern void read_persistent_clock(struct timespec *ts);
 extern void read_boot_clock(struct timespec *ts);
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -382,7 +382,7 @@ int do_settimeofday(const struct timespe
 	struct timespec ts_delta;
 	unsigned long flags;
 
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+	if (!timespec_valid(tv))
 		return -EINVAL;
 
 	write_seqlock_irqsave(&xtime_lock, flags);
@@ -417,6 +417,8 @@ EXPORT_SYMBOL(do_settimeofday);
 int timekeeping_inject_offset(struct timespec *ts)
 {
 	unsigned long flags;
+	struct timespec tmp;
+	int ret = 0;
 
 	if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
 		return -EINVAL;
@@ -425,9 +427,16 @@ int timekeeping_inject_offset(struct tim
 
 	timekeeping_forward_now();
 
+	tmp = timespec_add(xtime,  *ts);
+	if (!timespec_valid(&tmp)) {
+		ret = -EINVAL;
+		goto error;
+	}
+
 	xtime = timespec_add(xtime, *ts);
 	wall_to_monotonic = timespec_sub(wall_to_monotonic, *ts);
 
+error: /* even if we error out, we forwarded the time, so call update */
 	timekeeping_update(true);
 
 	write_sequnlock_irqrestore(&xtime_lock, flags);
@@ -435,7 +444,7 @@ int timekeeping_inject_offset(struct tim
 	/* signal hrtimers about time change */
 	clock_was_set();
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(timekeeping_inject_offset);
 
@@ -582,7 +591,20 @@ void __init timekeeping_init(void)
 	struct timespec now, boot;
 
 	read_persistent_clock(&now);
+	if (!timespec_valid(&now)) {
+		pr_warn("WARNING: Persistent clock returned invalid value!\n"
+			"         Check your CMOS/BIOS settings.\n");
+		now.tv_sec = 0;
+		now.tv_nsec = 0;
+	}
+
 	read_boot_clock(&boot);
+	if (!timespec_valid(&boot)) {
+		pr_warn("WARNING: Boot clock returned invalid value!\n"
+			"         Check your CMOS/BIOS settings.\n");
+		boot.tv_sec = 0;
+		boot.tv_nsec = 0;
+	}
 
 	write_seqlock_irqsave(&xtime_lock, flags);
 

[ 079/135] time: Avoid making adjustments if we havent accumulated anything

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

This is a -stable backport of bf2ac312195155511a0f79325515cbb61929898a

If update_wall_time() is called and the current offset isn't large
enough to accumulate, avoid re-calling timekeeping_adjust which may
change the clock freq and can cause 1ns inconsistencies with
CLOCK_REALTIME_COARSE/CLOCK_MONOTONIC_COARSE.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
 kernel/time/timekeeping.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1033,6 +1033,10 @@ static void update_wall_time(void)
 #else
 	offset = (clock->read(clock) - clock->cycle_last) & clock->mask;
 #endif
+	/* Check if there's really nothing to do */
+	if (offset < timekeeper.cycle_interval)
+		return;
+
 	timekeeper.xtime_nsec = (s64)xtime.tv_nsec << timekeeper.shift;
 
 	/*

[ 080/135] time: Move ktime_t overflow checking into timespec_valid_strict

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

This is a -stable backport of cee58483cf56e0ba355fdd97ff5e8925329aa936

Andreas Bombe reported that the added ktime_t overflow checking added to
timespec_valid in commit 4e8b14526ca7 ("time: Improve sanity checking of
timekeeping inputs") was causing problems with X.org because it caused
timeouts larger then KTIME_T to be invalid.

Previously, these large timeouts would be clamped to KTIME_MAX and would
never expire, which is valid.

This patch splits the ktime_t overflow checking into a new
timespec_valid_strict function, and converts the timekeeping codes
internal checking to use this more strict function.

Reported-and-tested-by: Andreas Bombe <aeb@debian.org>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
 include/linux/time.h      |    7 +++++++
 kernel/time/timekeeping.c |   10 +++++-----
 2 files changed, 12 insertions(+), 5 deletions(-)

--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -125,6 +125,13 @@ static inline bool timespec_valid(const
 	/* Can't have more nanoseconds then a second */
 	if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
 		return false;
+	return true;
+}
+
+static inline bool timespec_valid_strict(const struct timespec *ts)
+{
+	if (!timespec_valid(ts))
+		return false;
 	/* Disallow values that could overflow ktime_t */
 	if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX)
 		return false;
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -382,7 +382,7 @@ int do_settimeofday(const struct timespe
 	struct timespec ts_delta;
 	unsigned long flags;
 
-	if (!timespec_valid(tv))
+	if (!timespec_valid_strict(tv))
 		return -EINVAL;
 
 	write_seqlock_irqsave(&xtime_lock, flags);
@@ -428,7 +428,7 @@ int timekeeping_inject_offset(struct tim
 	timekeeping_forward_now();
 
 	tmp = timespec_add(xtime,  *ts);
-	if (!timespec_valid(&tmp)) {
+	if (!timespec_valid_strict(&tmp)) {
 		ret = -EINVAL;
 		goto error;
 	}
@@ -591,7 +591,7 @@ void __init timekeeping_init(void)
 	struct timespec now, boot;
 
 	read_persistent_clock(&now);
-	if (!timespec_valid(&now)) {
+	if (!timespec_valid_strict(&now)) {
 		pr_warn("WARNING: Persistent clock returned invalid value!\n"
 			"         Check your CMOS/BIOS settings.\n");
 		now.tv_sec = 0;
@@ -599,7 +599,7 @@ void __init timekeeping_init(void)
 	}
 
 	read_boot_clock(&boot);
-	if (!timespec_valid(&boot)) {
+	if (!timespec_valid_strict(&boot)) {
 		pr_warn("WARNING: Boot clock returned invalid value!\n"
 			"         Check your CMOS/BIOS settings.\n");
 		boot.tv_sec = 0;
@@ -649,7 +649,7 @@ static void update_sleep_time(struct tim
  */
 static void __timekeeping_inject_sleeptime(struct timespec *delta)
 {
-	if (!timespec_valid(delta)) {
+	if (!timespec_valid_strict(delta)) {
 		printk(KERN_WARNING "__timekeeping_inject_sleeptime: Invalid "
 					"sleep delta value!\n");
 		return;

[ 081/135] drm/i915: Wait for all pending operations to the fb before disabling the pipe

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

During modeset we have to disable the pipe to reconfigure its timings
and maybe its size. Userspace may have queued up command buffers that
depend upon the pipe running in a certain configuration and so the
commands may become confused across the modeset. At the moment, we use a
less than satisfactory kick-scanline-waits should the GPU hang during
the modeset. It should be more reliable to wait for the pending
operations to complete first, even though we still have a window for
userspace to submit a broken command buffer during the modeset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 0f91128d88bbb8b0a8e7bb93df2c40680871d45a)

Signed-off-by: Timo Aaltonen <timo.aaltonen@canonical.com>
---
 drivers/gpu/drm/i915/intel_display.c |   27 ++++-----------------------
 1 file changed, 4 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index cc75c4b..ae74df7 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2852,16 +2852,14 @@ static void intel_clear_scanline_wait(struct drm_device *dev)
 
 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
 {
-	struct drm_i915_gem_object *obj;
-	struct drm_i915_private *dev_priv;
+	struct drm_device *dev = crtc->dev;
 
 	if (crtc->fb == NULL)
 		return;
 
-	obj = to_intel_framebuffer(crtc->fb)->obj;
-	dev_priv = crtc->dev->dev_private;
-	wait_event(dev_priv->pending_flip_queue,
-		   atomic_read(&obj->pending_flip) == 0);
+	mutex_lock(&dev->struct_mutex);
+	intel_finish_fb(crtc->fb);
+	mutex_unlock(&dev->struct_mutex);
 }
 
 static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
@@ -3322,23 +3320,6 @@ static void intel_crtc_disable(struct drm_crtc *crtc)
 	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 	struct drm_device *dev = crtc->dev;
 
-	/* Flush any pending WAITs before we disable the pipe. Note that
-	 * we need to drop the struct_mutex in order to acquire it again
-	 * during the lowlevel dpms routines around a couple of the
-	 * operations. It does not look trivial nor desirable to move
-	 * that locking higher. So instead we leave a window for the
-	 * submission of further commands on the fb before we can actually
-	 * disable it. This race with userspace exists anyway, and we can
-	 * only rely on the pipe being disabled by userspace after it
-	 * receives the hotplug notification and has flushed any pending
-	 * batches.
-	 */
-	if (crtc->fb) {
-		mutex_lock(&dev->struct_mutex);
-		intel_finish_fb(crtc->fb);
-		mutex_unlock(&dev->struct_mutex);
-	}
-
 	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
 
 	if (crtc->fb) {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[ 082/135] xhci: Fix bug after deq ptr set to link TRB.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

This patch fixes a particularly nasty bug that was revealed by the ring
expansion patches.  The bug has been present since the very beginning of
the xHCI driver history, and could have caused general protection faults
from bad memory accesses.

The first thing to note is that a Set TR Dequeue Pointer command can
move the dequeue pointer to a link TRB, if the canceled or stalled
transfer TD ended just before a link TRB.  The function to increment the
dequeue pointer, inc_deq, was written before cancellation and stall
support was added.  It assumed that the dequeue pointer could never
point to a link TRB.  It would unconditionally increment the dequeue
pointer at the start of the function, check if the pointer was now on a
link TRB, and move it to the top of the next segment if so.

This means that if a Set TR Dequeue Point command moved the dequeue
pointer to a link TRB, a subsequent call to inc_deq() would move the
pointer off the segment and into la-la-land.  It would then read from
that memory to determine if it was a link TRB.  Other functions would
often call inc_deq() until the dequeue pointer matched some other
pointer, which means this function would quite happily read all of
system memory before wrapping around to the right pointer value.

Often, there would be another endpoint segment from a different ring
allocated from the same DMA pool, which would be contiguous to the
segment inc_deq just stepped off of.  inc_deq would eventually find the
link TRB in that segment, and blindly move the dequeue pointer back to
the top of the correct ring segment.

The only reason the original code worked at all is because there was
only one ring segment.  With the ring expansion patches, the dequeue
pointer would eventually wrap into place, but the dequeue segment would
be out-of-sync.  On the second TD after the dequeue pointer was moved to
a link TRB, trb_in_td() would fail (because the dequeue pointer and
dequeue segment were out-of-sync), and this message would appear:

ERROR Transfer event TRB DMA ptr not part of current TD

This fixes bugzilla entry 4333 (option-based modem unhappy on USB 3.0
port: "Transfer event TRB DMA ptr not part of current TD", "rejecting
I/O to offline device"),

	https://bugzilla.kernel.org/show_bug.cgi?id=43333

and possibly other general protection fault bugs as well.

This patch should be backported to kernels as old as 2.6.31.  The
original upstream commit is 50d0206fcaea3e736f912fd5b00ec6233fb4ce44,
but it does not apply to kernels older than 3.4, because inc_deq was
changed in 3.3 and 3.4.  This patch should apply to the 3.2 kernel and
older.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
---
 drivers/usb/host/xhci-ring.c |   39 ++++++++++++++++++++++++---------------
 1 files changed, 24 insertions(+), 15 deletions(-)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -145,25 +145,34 @@ static void next_trb(struct xhci_hcd *xh
  */
 static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
 {
-	union xhci_trb *next = ++(ring->dequeue);
 	unsigned long long addr;
 
 	ring->deq_updates++;
-	/* Update the dequeue pointer further if that was a link TRB or we're at
-	 * the end of an event ring segment (which doesn't have link TRBS)
-	 */
-	while (last_trb(xhci, ring, ring->deq_seg, next)) {
-		if (consumer && last_trb_on_last_seg(xhci, ring, ring->deq_seg, next)) {
-			ring->cycle_state = (ring->cycle_state ? 0 : 1);
-			if (!in_interrupt())
-				xhci_dbg(xhci, "Toggle cycle state for ring %p = %i\n",
-						ring,
-						(unsigned int) ring->cycle_state);
+
+	do {
+		/*
+		 * Update the dequeue pointer further if that was a link TRB or
+		 * we're at the end of an event ring segment (which doesn't have
+		 * link TRBS)
+		 */
+		if (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) {
+			if (consumer && last_trb_on_last_seg(xhci, ring,
+						ring->deq_seg, ring->dequeue)) {
+				if (!in_interrupt())
+					xhci_dbg(xhci, "Toggle cycle state "
+							"for ring %p = %i\n",
+							ring,
+							(unsigned int)
+							ring->cycle_state);
+				ring->cycle_state = (ring->cycle_state ? 0 : 1);
+			}
+			ring->deq_seg = ring->deq_seg->next;
+			ring->dequeue = ring->deq_seg->trbs;
+		} else {
+			ring->dequeue++;
 		}
-		ring->deq_seg = ring->deq_seg->next;
-		ring->dequeue = ring->deq_seg->trbs;
-		next = ring->dequeue;
-	}
+	} while (last_trb(xhci, ring, ring->deq_seg, ring->dequeue));
+
 	addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
 }
 

[ 083/135] ARM: 7487/1: mm: avoid setting nG bit for user mappings that arent present

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit 47f1204329237a0f8655f5a9f14a38ac81946ca1 upstream.

Swap entries are encoding in ptes such that !pte_present(pte) and
pte_file(pte). The remaining bits of the descriptor are used to identify
the swapfile and offset within it to the swap entry.

When writing such a pte for a user virtual address, set_pte_at
unconditionally sets the nG bit, which (in the case of LPAE) will
corrupt the swapfile offset and lead to a BUG:

[  140.494067] swap_free: Unused swap offset entry 000763b4
[  140.509989] BUG: Bad page map in process rs:main Q:Reg  pte:0ec76800 pmd:8f92e003

This patch fixes the problem by only setting the nG bit for user
mappings that are actually present.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/include/asm/pgtable.h |   34 ++++++++++++++++++----------------
 arch/arm/mm/flush.c            |    2 --
 2 files changed, 18 insertions(+), 18 deletions(-)

--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -232,6 +232,18 @@ static inline pte_t *pmd_page_vaddr(pmd_
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
+#define pte_none(pte)		(!pte_val(pte))
+#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
+#define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
+#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
+#define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
+#define pte_special(pte)	(0)
+
+#define pte_present_user(pte) \
+	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
+	 (L_PTE_PRESENT | L_PTE_USER))
+
 #if __LINUX_ARM_ARCH__ < 6
 static inline void __sync_icache_dcache(pte_t pteval)
 {
@@ -243,25 +255,15 @@ extern void __sync_icache_dcache(pte_t p
 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pteval)
 {
-	if (addr >= TASK_SIZE)
-		set_pte_ext(ptep, pteval, 0);
-	else {
+	unsigned long ext = 0;
+
+	if (addr < TASK_SIZE && pte_present_user(pteval)) {
 		__sync_icache_dcache(pteval);
-		set_pte_ext(ptep, pteval, PTE_EXT_NG);
+		ext |= PTE_EXT_NG;
 	}
-}
 
-#define pte_none(pte)		(!pte_val(pte))
-#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
-#define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
-#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
-#define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
-#define pte_special(pte)	(0)
-
-#define pte_present_user(pte) \
-	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
-	 (L_PTE_PRESENT | L_PTE_USER))
+	set_pte_ext(ptep, pteval, ext);
+}
 
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -236,8 +236,6 @@ void __sync_icache_dcache(pte_t pteval)
 	struct page *page;
 	struct address_space *mapping;
 
-	if (!pte_present_user(pteval))
-		return;
 	if (cache_is_vipt_nonaliasing() && !pte_exec(pteval))
 		/* only flush non-aliasing VIPT caches for exec mappings */
 		return;

[ 084/135] i2c-i801: Add device IDs for Intel Lynx Point

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seth Heasley <seth.heasley@intel.com>

commit 062737fb6d90c632439b1f77ad6a4965cfc84a20 upstream.

Add the SMBus controller device IDs for the Intel Lynx Point PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-i801 |    1 +
 drivers/i2c/busses/Kconfig        |    1 +
 drivers/i2c/busses/i2c-i801.c     |    3 +++
 3 files changed, 5 insertions(+)

diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 2871fd5..71f55bb 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -20,6 +20,7 @@ Supported adapters:
   * Intel Patsburg (PCH)
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
+  * Intel Lynx Point (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 71c1b0a..d2c5095 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -103,6 +103,7 @@ config I2C_I801
 	    Patsburg (PCH)
 	    DH89xxCC (PCH)
 	    Panther Point (PCH)
+	    Lynx Point (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 5d2e281..07d0c95 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -51,6 +51,7 @@
   Patsburg (PCH) IDF    0x1d72     32     hard     yes     yes     yes
   DH89xxCC (PCH)        0x2330     32     hard     yes     yes     yes
   Panther Point (PCH)   0x1e22     32     hard     yes     yes     yes
+  Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -145,6 +146,7 @@
 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
 
 struct i801_priv {
 	struct i2c_adapter adapter;
@@ -633,6 +635,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
 	{ 0, }
 };
 

[ 085/135] i2c-i801: Add Device IDs for Intel Lynx Point-LP PCH

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Ralston <james.d.ralston@intel.com>

commit 4a8f1ddde942e232387e6129ce4f4c412e43802f upstream.

Add the SMBus Device IDs for the Intel Lynx Point-LP PCH.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 Documentation/i2c/busses/i2c-i801 |    1 +
 drivers/i2c/busses/Kconfig        |    1 +
 drivers/i2c/busses/i2c-i801.c     |    3 +++
 3 files changed, 5 insertions(+)

diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 615142d..157416e 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -21,6 +21,7 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
+  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b4aaa1b..af8bc83 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -104,6 +104,7 @@ config I2C_I801
 	    DH89xxCC (PCH)
 	    Panther Point (PCH)
 	    Lynx Point (PCH)
+	    Lynx Point-LP (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 898dcf9..33e9b0c 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -52,6 +52,7 @@
   DH89xxCC (PCH)        0x2330     32     hard     yes     yes     yes
   Panther Point (PCH)   0x1e22     32     hard     yes     yes     yes
   Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
+  Lynx Point-LP (PCH)   0x9c22     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -155,6 +156,7 @@
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS	0x9c22
 
 struct i801_priv {
 	struct i2c_adapter adapter;
@@ -771,6 +773,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
 	{ 0, }
 };
 

[ 086/135] USB: option: add ZTE K5006-Z

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1478 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit f1b5c997e68533df1f96dcd3068a231bca495603 upstream.

The ZTE (Vodafone) K5006-Z use the following
interface layout:

00 DIAG
01 secondary
02 modem
03 networkcard
04 storage

Ignoring interface #3 which is handled by the qmi_wwan
driver.

Cc: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 9930628..cc40f47 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -886,6 +886,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },

[ 087/135] USB: option: replace ZTE K5006-Z entry with vendor class rule

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 3724 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit ba9edaa468869a8cea242a411066b0f490751798 upstream.

Fix the ZTE K5006-Z entry so that it actually matches anything

  commit f1b5c997 USB: option: add ZTE K5006-Z

added a device specific entry assuming that the device would use
class/subclass/proto == ff/ff/ff like other ZTE devices. It
turns out that ZTE has started using vendor specific subclass
and protocol codes:

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=1018 Rev= 0.00
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE LTE Technologies MSM
S:  SerialNumber=MF821Vxxxxxxx
C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=86 Prot=10 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=05 Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=00 Driver=qmi_wwan
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

We do not have any information on how ZTE intend to use these
codes, but let us assume for now that the 3 sets matching
serial functions in the K5006-Z always will identify a serial
function in a ZTE device.

Cc: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/option.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index cc40f47..5ce88d1 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -886,8 +886,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
@@ -1092,6 +1090,10 @@ static const struct usb_device_id option_ids[] = {
 	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
 	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
+
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */

[ 088/135] ARM: 7496/1: hw_breakpoint: dont rely on dfsr to show watchpoint access type

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit bf8801145c01ab600f8df66e8c879ac642fa5846 upstream.

>From ARM debug architecture v7.1 onwards, a watchpoint exception causes
the DFAR to be updated with the faulting data address. However, DFSR.WnR
takes an UNKNOWN value and therefore cannot be used in general to
determine the access type that triggered the watchpoint.

This patch forbids watchpoints without an overflow handler from
specifying a specific access type (load/store). Those with overflow
handlers must be able to handle false positives potentially triggered by
a watchpoint of a different access type on the same address. For
SIGTRAP-based handlers (i.e. ptrace), this should have no impact.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/kernel/hw_breakpoint.c |   55 ++++++++++++++++++++++++++++-----------
 1 file changed, 40 insertions(+), 15 deletions(-)

diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index ba386bd..18d39ea 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -159,6 +159,12 @@ static int debug_arch_supported(void)
 		arch >= ARM_DEBUG_ARCH_V7_1;
 }
 
+/* Can we determine the watchpoint access type from the fsr? */
+static int debug_exception_updates_fsr(void)
+{
+	return 0;
+}
+
 /* Determine number of WRP registers available. */
 static int get_num_wrp_resources(void)
 {
@@ -619,18 +625,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 	info->address &= ~alignment_mask;
 	info->ctrl.len <<= offset;
 
-	/*
-	 * Currently we rely on an overflow handler to take
-	 * care of single-stepping the breakpoint when it fires.
-	 * In the case of userspace breakpoints on a core with V7 debug,
-	 * we can use the mismatch feature as a poor-man's hardware
-	 * single-step, but this only works for per-task breakpoints.
-	 */
-	if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
-	    !core_has_mismatch_brps() || !bp->hw.bp_target)) {
-		pr_warning("overflow handler required but none found\n");
-		ret = -EINVAL;
+	if (!bp->overflow_handler) {
+		/*
+		 * Mismatch breakpoints are required for single-stepping
+		 * breakpoints.
+		 */
+		if (!core_has_mismatch_brps())
+			return -EINVAL;
+
+		/* We don't allow mismatch breakpoints in kernel space. */
+		if (arch_check_bp_in_kernelspace(bp))
+			return -EPERM;
+
+		/*
+		 * Per-cpu breakpoints are not supported by our stepping
+		 * mechanism.
+		 */
+		if (!bp->hw.bp_target)
+			return -EINVAL;
+
+		/*
+		 * We only support specific access types if the fsr
+		 * reports them.
+		 */
+		if (!debug_exception_updates_fsr() &&
+		    (info->ctrl.type == ARM_BREAKPOINT_LOAD ||
+		     info->ctrl.type == ARM_BREAKPOINT_STORE))
+			return -EINVAL;
 	}
+
 out:
 	return ret;
 }
@@ -706,10 +729,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 				goto unlock;
 
 			/* Check that the access type matches. */
-			access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
-				 HW_BREAKPOINT_R;
-			if (!(access & hw_breakpoint_type(wp)))
-				goto unlock;
+			if (debug_exception_updates_fsr()) {
+				access = (fsr & ARM_FSR_ACCESS_MASK) ?
+					  HW_BREAKPOINT_W : HW_BREAKPOINT_R;
+				if (!(access & hw_breakpoint_type(wp)))
+					goto unlock;
+			}
 
 			/* We have a winner. */
 			info->trigger = addr;

[ 089/135] drm/i915: SDVO hotplug have different interrupt status bits for i915/i965/g4x

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

I had to make substantial changes to this one, so please review!

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit 084b612ecf8e59973576b2f644e6949609c79375 upstream.

Note that gen3 is the only platform where we've got the bit
definitions right, hence the workaround of disabling sdvo hotplug
support on i945g/gm is not due to misdiagnosis of broken hotplug irq
handling ...

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: add some blurb about sdvo hotplug fail on i945g/gm I've
wondered about while reviewing.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2:
 - Adjust context
 - Handle all three cases in i915_driver_irq_postinstall() as there
   are not separate functions for gen3 and gen4+
 - Carry on using IS_SDVOB() in intel_sdvo_init()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2006,10 +2006,22 @@ static int i915_driver_irq_postinstall(s
 			hotplug_en |= HDMIC_HOTPLUG_INT_EN;
 		if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
 			hotplug_en |= HDMID_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
-			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
-			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		if (IS_G4X(dev)) {
+			if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X)
+				hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+			if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X)
+				hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		} else if (IS_GEN4(dev)) {
+			if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965)
+				hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+			if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965)
+				hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		} else {
+			if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
+				hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+			if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
+				hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		}
 		if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
 			hotplug_en |= CRT_HOTPLUG_INT_EN;
 
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1419,14 +1419,20 @@
 #define   DPC_HOTPLUG_INT_STATUS		(1 << 28)
 #define   HDMID_HOTPLUG_INT_STATUS		(1 << 27)
 #define   DPD_HOTPLUG_INT_STATUS		(1 << 27)
+/* CRT/TV common between gen3+ */
 #define   CRT_HOTPLUG_INT_STATUS		(1 << 11)
 #define   TV_HOTPLUG_INT_STATUS			(1 << 10)
 #define   CRT_HOTPLUG_MONITOR_MASK		(3 << 8)
 #define   CRT_HOTPLUG_MONITOR_COLOR		(3 << 8)
 #define   CRT_HOTPLUG_MONITOR_MONO		(2 << 8)
 #define   CRT_HOTPLUG_MONITOR_NONE		(0 << 8)
-#define   SDVOC_HOTPLUG_INT_STATUS		(1 << 7)
-#define   SDVOB_HOTPLUG_INT_STATUS		(1 << 6)
+/* SDVO is different across gen3/4 */
+#define   SDVOC_HOTPLUG_INT_STATUS_G4X		(1 << 3)
+#define   SDVOB_HOTPLUG_INT_STATUS_G4X		(1 << 2)
+#define   SDVOC_HOTPLUG_INT_STATUS_I965		(3 << 4)
+#define   SDVOB_HOTPLUG_INT_STATUS_I965		(3 << 2)
+#define   SDVOC_HOTPLUG_INT_STATUS_I915		(1 << 7)
+#define   SDVOB_HOTPLUG_INT_STATUS_I915		(1 << 6)
 
 /* SDVO port control */
 #define SDVOB			0x61140
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2514,6 +2514,7 @@ bool intel_sdvo_init(struct drm_device *
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_encoder *intel_encoder;
 	struct intel_sdvo *intel_sdvo;
+	u32 hotplug_mask;
 	int i;
 
 	intel_sdvo = kzalloc(sizeof(struct intel_sdvo), GFP_KERNEL);
@@ -2544,10 +2545,18 @@ bool intel_sdvo_init(struct drm_device *
 		}
 	}
 
-	if (IS_SDVOB(sdvo_reg))
-		dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
-	else
-		dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
+	hotplug_mask = 0;
+	if (IS_G4X(dev)) {
+		hotplug_mask = IS_SDVOB(sdvo_reg) ?
+			SDVOB_HOTPLUG_INT_STATUS_G4X : SDVOC_HOTPLUG_INT_STATUS_G4X;
+	} else if (IS_GEN4(dev)) {
+		hotplug_mask = IS_SDVOB(sdvo_reg) ?
+			SDVOB_HOTPLUG_INT_STATUS_I965 : SDVOC_HOTPLUG_INT_STATUS_I965;
+	} else {
+		hotplug_mask = IS_SDVOB(sdvo_reg) ?
+			SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915;
+	}
+	dev_priv->hotplug_supported_mask |= hotplug_mask;
 
 	drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
 

[ 090/135] drm/i915: only enable sdvo hotplug irq if needed

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2514 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jani Nikula <jani.nikula@intel.com>

commit fcbc50da7753b210b4442ca9abc4efbd4e481f6e upstream.

Avoid constant wakeups caused by noisy irq lines when we don't even care
about the irq. This should be particularly useful for i945g/gm where the
hotplug has been disabled:

commit 768b107e4b3be0acf6f58e914afe4f337c00932b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri May 4 11:29:56 2012 +0200

    drm/i915: disable sdvo hotplug on i945g/gm

v2: While at it, remove the bogus hotplug_active read, and do not mask
hotplug_active[0] before checking whether the irq is needed, per discussion
with Daniel on IRC.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38442
Tested-by: Dominik Köppl <dominik@devwork.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/i915/intel_sdvo.c |   15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2556,7 +2556,6 @@ bool intel_sdvo_init(struct drm_device *
 		hotplug_mask = IS_SDVOB(sdvo_reg) ?
 			SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915;
 	}
-	dev_priv->hotplug_supported_mask |= hotplug_mask;
 
 	drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
 
@@ -2564,14 +2563,6 @@ bool intel_sdvo_init(struct drm_device *
 	if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
 		goto err;
 
-	/* Set up hotplug command - note paranoia about contents of reply.
-	 * We assume that the hardware is in a sane state, and only touch
-	 * the bits we think we understand.
-	 */
-	intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
-			     &intel_sdvo->hotplug_active, 2);
-	intel_sdvo->hotplug_active[0] &= ~0x3;
-
 	if (intel_sdvo_output_setup(intel_sdvo,
 				    intel_sdvo->caps.output_flags) != true) {
 		DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
@@ -2579,6 +2570,12 @@ bool intel_sdvo_init(struct drm_device *
 		goto err;
 	}
 
+	/* Only enable the hotplug irq if we need it, to work around noisy
+	 * hotplug lines.
+	 */
+	if (intel_sdvo->hotplug_active[0])
+		dev_priv->hotplug_supported_mask |= hotplug_mask;
+
 	intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
 
 	/* Set the input timing to the screen. Assume always input 0. */

[ 091/135] can: mcp251x: avoid repeated frame bug

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2195 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benoît Locher <Benoit.Locher@skf.com>

commit cab32f39dcc5b35db96497dc0a026b5dea76e4e7 upstream.

The MCP2515 has a silicon bug causing repeated frame transmission, see section
5 of MCP2515 Rev. B Silicon Errata Revision G (March 2007).

Basically, setting TXBnCTRL.TXREQ in either SPI mode (00 or 11) will eventually
cause the bug. The workaround proposed by Microchip is to use mode 00 and send
a RTS command on the SPI bus to initiate the transmission.

Signed-off-by: Benoît Locher <Benoit.Locher@skf.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/can/mcp251x.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index a580db2..26e7129 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -83,6 +83,11 @@
 #define INSTRUCTION_LOAD_TXB(n)	(0x40 + 2 * (n))
 #define INSTRUCTION_READ_RXB(n)	(((n) == 0) ? 0x90 : 0x94)
 #define INSTRUCTION_RESET	0xC0
+#define RTS_TXB0		0x01
+#define RTS_TXB1		0x02
+#define RTS_TXB2		0x04
+#define INSTRUCTION_RTS(n)	(0x80 | ((n) & 0x07))
+
 
 /* MPC251x registers */
 #define CANSTAT	      0x0e
@@ -397,6 +402,7 @@ static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf,
 static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
 			  int tx_buf_idx)
 {
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
 	u32 sid, eid, exide, rtr;
 	u8 buf[SPI_TRANSFER_BUF_LEN];
 
@@ -418,7 +424,10 @@ static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
 	buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->can_dlc;
 	memcpy(buf + TXBDAT_OFF, frame->data, frame->can_dlc);
 	mcp251x_hw_tx_frame(spi, buf, frame->can_dlc, tx_buf_idx);
-	mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx), TXBCTRL_TXREQ);
+
+	/* use INSTRUCTION_RTS, to avoid "repeated frame problem" */
+	priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx);
+	mcp251x_spi_trans(priv->spi, 1);
 }
 
 static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,

[ 092/135] perf_event: Switch to internal refcount, fix race with close()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@ZenIV.linux.org.uk>

commit a6fa941d94b411bbd2b6421ffbde6db3c93e65ab upstream.

Don't mess with file refcounts (or keep a reference to file, for
that matter) in perf_event.  Use explicit refcount of its own
instead.  Deal with the race between the final reference to event
going away and new children getting created for it by use of
atomic_long_inc_not_zero() in inherit_event(); just have the
latter free what it had allocated and return NULL, that works
out just fine (children of siblings of something doomed are
created as singletons, same as if the child of leader had been
created and immediately killed).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120820135925.GG23464@ZenIV.linux.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/perf_event.h |    2 +-
 kernel/events/core.c       |   62 +++++++++++++++++++++++---------------------
 2 files changed, 34 insertions(+), 30 deletions(-)

diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 7602ccb..ad04dfc 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -926,7 +926,7 @@ struct perf_event {
 	struct hw_perf_event		hw;
 
 	struct perf_event_context	*ctx;
-	struct file			*filp;
+	atomic_long_t			refcount;
 
 	/*
 	 * These accumulate total time (in nanoseconds) that children
diff --git a/kernel/events/core.c b/kernel/events/core.c
index b7935fc..efef428 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -2935,12 +2935,12 @@ EXPORT_SYMBOL_GPL(perf_event_release_kernel);
 /*
  * Called when the last reference to the file is gone.
  */
-static int perf_release(struct inode *inode, struct file *file)
+static void put_event(struct perf_event *event)
 {
-	struct perf_event *event = file->private_data;
 	struct task_struct *owner;
 
-	file->private_data = NULL;
+	if (!atomic_long_dec_and_test(&event->refcount))
+		return;
 
 	rcu_read_lock();
 	owner = ACCESS_ONCE(event->owner);
@@ -2975,7 +2975,13 @@ static int perf_release(struct inode *inode, struct file *file)
 		put_task_struct(owner);
 	}
 
-	return perf_event_release_kernel(event);
+	perf_event_release_kernel(event);
+}
+
+static int perf_release(struct inode *inode, struct file *file)
+{
+	put_event(file->private_data);
+	return 0;
 }
 
 u64 perf_event_read_value(struct perf_event *event, u64 *enabled, u64 *running)
@@ -3227,7 +3233,7 @@ unlock:
 
 static const struct file_operations perf_fops;
 
-static struct perf_event *perf_fget_light(int fd, int *fput_needed)
+static struct file *perf_fget_light(int fd, int *fput_needed)
 {
 	struct file *file;
 
@@ -3241,7 +3247,7 @@ static struct perf_event *perf_fget_light(int fd, int *fput_needed)
 		return ERR_PTR(-EBADF);
 	}
 
-	return file->private_data;
+	return file;
 }
 
 static int perf_event_set_output(struct perf_event *event,
@@ -3273,19 +3279,21 @@ static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	case PERF_EVENT_IOC_SET_OUTPUT:
 	{
+		struct file *output_file = NULL;
 		struct perf_event *output_event = NULL;
 		int fput_needed = 0;
 		int ret;
 
 		if (arg != -1) {
-			output_event = perf_fget_light(arg, &fput_needed);
-			if (IS_ERR(output_event))
-				return PTR_ERR(output_event);
+			output_file = perf_fget_light(arg, &fput_needed);
+			if (IS_ERR(output_file))
+				return PTR_ERR(output_file);
+			output_event = output_file->private_data;
 		}
 
 		ret = perf_event_set_output(event, output_event);
 		if (output_event)
-			fput_light(output_event->filp, fput_needed);
+			fput_light(output_file, fput_needed);
 
 		return ret;
 	}
@@ -5950,6 +5958,7 @@ perf_event_alloc(struct perf_event_attr *attr, int cpu,
 
 	mutex_init(&event->mmap_mutex);
 
+	atomic_long_set(&event->refcount, 1);
 	event->cpu		= cpu;
 	event->attr		= *attr;
 	event->group_leader	= group_leader;
@@ -6260,12 +6269,12 @@ SYSCALL_DEFINE5(perf_event_open,
 		return event_fd;
 
 	if (group_fd != -1) {
-		group_leader = perf_fget_light(group_fd, &fput_needed);
-		if (IS_ERR(group_leader)) {
-			err = PTR_ERR(group_leader);
+		group_file = perf_fget_light(group_fd, &fput_needed);
+		if (IS_ERR(group_file)) {
+			err = PTR_ERR(group_file);
 			goto err_fd;
 		}
-		group_file = group_leader->filp;
+		group_leader = group_file->private_data;
 		if (flags & PERF_FLAG_FD_OUTPUT)
 			output_event = group_leader;
 		if (flags & PERF_FLAG_FD_NO_GROUP)
@@ -6402,7 +6411,6 @@ SYSCALL_DEFINE5(perf_event_open,
 		put_ctx(gctx);
 	}
 
-	event->filp = event_file;
 	WARN_ON_ONCE(ctx->parent_ctx);
 	mutex_lock(&ctx->mutex);
 
@@ -6496,7 +6504,6 @@ perf_event_create_kernel_counter(struct perf_event_attr *attr, int cpu,
 		goto err_free;
 	}
 
-	event->filp = NULL;
 	WARN_ON_ONCE(ctx->parent_ctx);
 	mutex_lock(&ctx->mutex);
 	perf_install_in_context(ctx, event, cpu);
@@ -6578,7 +6585,7 @@ static void sync_child_event(struct perf_event *child_event,
 	 * Release the parent event, if this was the last
 	 * reference to it.
 	 */
-	fput(parent_event->filp);
+	put_event(parent_event);
 }
 
 static void
@@ -6654,9 +6661,8 @@ static void perf_event_exit_task_context(struct task_struct *child, int ctxn)
 	 *
 	 *   __perf_event_exit_task()
 	 *     sync_child_event()
-	 *       fput(parent_event->filp)
-	 *         perf_release()
-	 *           mutex_lock(&ctx->mutex)
+	 *       put_event()
+	 *         mutex_lock(&ctx->mutex)
 	 *
 	 * But since its the parent context it won't be the same instance.
 	 */
@@ -6724,7 +6730,7 @@ static void perf_free_event(struct perf_event *event,
 	list_del_init(&event->child_list);
 	mutex_unlock(&parent->child_mutex);
 
-	fput(parent->filp);
+	put_event(parent);
 
 	perf_group_detach(event);
 	list_del_event(event, ctx);
@@ -6804,6 +6810,12 @@ inherit_event(struct perf_event *parent_event,
 				           NULL, NULL);
 	if (IS_ERR(child_event))
 		return child_event;
+
+	if (!atomic_long_inc_not_zero(&parent_event->refcount)) {
+		free_event(child_event);
+		return NULL;
+	}
+
 	get_ctx(child_ctx);
 
 	/*
@@ -6845,14 +6857,6 @@ inherit_event(struct perf_event *parent_event,
 	raw_spin_unlock_irqrestore(&child_ctx->lock, flags);
 
 	/*
-	 * Get a reference to the parent filp - we will fput it
-	 * when the child event exits. This is safe to do because
-	 * we are in the parent and we know that the filp still
-	 * exists and has a nonzero count:
-	 */
-	atomic_long_inc(&parent_event->filp->f_count);
-
-	/*
 	 * Link this into the parent event's child list
 	 */
 	WARN_ON_ONCE(parent_event->ctx->parent_ctx);

[ 093/135] NFS: Fix the initialisation of the readdir cookieverf array

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit c3f52af3e03013db5237e339c817beaae5ec9e3a upstream.

When the NFS_COOKIEVERF helper macro was converted into a static
inline function in commit 99fadcd764 (nfs: convert NFS_*(inode)
helpers to static inline), we broke the initialisation of the
readdir cookies, since that depended on doing a memset with an
argument of 'sizeof(NFS_COOKIEVERF(inode))' which therefore
changed from sizeof(be32 cookieverf[2]) to sizeof(be32 *).

At this point, NFS_COOKIEVERF seems to be more of an obfuscation
than a helper, so the best thing would be to just get rid of it.

Also see: https://bugzilla.kernel.org/show_bug.cgi?id=46881

Reported-by: Andi Kleen <andi@firstfloor.org>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfs/inode.c         |    2 +-
 fs/nfs/nfs3proc.c      |    2 +-
 fs/nfs/nfs4proc.c      |    4 ++--
 include/linux/nfs_fs.h |    5 -----
 4 files changed, 4 insertions(+), 9 deletions(-)

diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index c6e895f..9b47610 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -154,7 +154,7 @@ static void nfs_zap_caches_locked(struct inode *inode)
 	nfsi->attrtimeo = NFS_MINATTRTIMEO(inode);
 	nfsi->attrtimeo_timestamp = jiffies;
 
-	memset(NFS_COOKIEVERF(inode), 0, sizeof(NFS_COOKIEVERF(inode)));
+	memset(NFS_I(inode)->cookieverf, 0, sizeof(NFS_I(inode)->cookieverf));
 	if (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode))
 		nfsi->cache_validity |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
 	else
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index d6b3b5f..6932209 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -643,7 +643,7 @@ nfs3_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
 		  u64 cookie, struct page **pages, unsigned int count, int plus)
 {
 	struct inode		*dir = dentry->d_inode;
-	__be32			*verf = NFS_COOKIEVERF(dir);
+	__be32			*verf = NFS_I(dir)->cookieverf;
 	struct nfs3_readdirargs	arg = {
 		.fh		= NFS_FH(dir),
 		.cookie		= cookie,
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 6352741..86b4c73 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3215,11 +3215,11 @@ static int _nfs4_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
 			dentry->d_parent->d_name.name,
 			dentry->d_name.name,
 			(unsigned long long)cookie);
-	nfs4_setup_readdir(cookie, NFS_COOKIEVERF(dir), dentry, &args);
+	nfs4_setup_readdir(cookie, NFS_I(dir)->cookieverf, dentry, &args);
 	res.pgbase = args.pgbase;
 	status = nfs4_call_sync(NFS_SERVER(dir)->client, NFS_SERVER(dir), &msg, &args.seq_args, &res.seq_res, 0);
 	if (status >= 0) {
-		memcpy(NFS_COOKIEVERF(dir), res.verifier.data, NFS4_VERIFIER_SIZE);
+		memcpy(NFS_I(dir)->cookieverf, res.verifier.data, NFS4_VERIFIER_SIZE);
 		status += args.pgbase;
 	}
 
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 1f8fc7f..4b03f56 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -265,11 +265,6 @@ static inline const struct nfs_rpc_ops *NFS_PROTO(const struct inode *inode)
 	return NFS_SERVER(inode)->nfs_client->rpc_ops;
 }
 
-static inline __be32 *NFS_COOKIEVERF(const struct inode *inode)
-{
-	return NFS_I(inode)->cookieverf;
-}
-
 static inline unsigned NFS_MINATTRTIMEO(const struct inode *inode)
 {
 	struct nfs_server *nfss = NFS_SERVER(inode);

[ 094/135] NFS: Fix a problem with the legacy binary mount code

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit 872ece86ea5c367aa92f44689c2d01a1c767aeb3 upstream.

Apparently, am-utils is still using the legacy binary mountdata interface,
and is having trouble parsing /proc/mounts due to the 'port=' field being
incorrectly set.

The following patch should fix up the regression.

Reported-by: Marius Tolzmann <tolzmann@molgen.mpg.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfs/super.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 239aff7..b8eda70 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1867,6 +1867,7 @@ static int nfs23_validate_mount_data(void *options,
 
 		memcpy(sap, &data->addr, sizeof(data->addr));
 		args->nfs_server.addrlen = sizeof(data->addr);
+		args->nfs_server.port = ntohs(data->addr.sin_port);
 		if (!nfs_verify_server_address(sap))
 			goto out_no_address;
 
@@ -2564,6 +2565,7 @@ static int nfs4_validate_mount_data(void *options,
 			return -EFAULT;
 		if (!nfs_verify_server_address(sap))
 			goto out_no_address;
+		args->nfs_server.port = ntohs(((struct sockaddr_in *)sap)->sin_port);
 
 		if (data->auth_flavourlen) {
 			if (data->auth_flavourlen > 1)

[ 095/135] staging: comedi: das08: Correct AI encoding for das08jr-16-ao

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

commit e6391a182865efc896cb2a8d79e07b7ac2f45b48 upstream.

The element of `das08_boards[]` for the 'das08jr-16-ao' board has the
`ai_encoding` member set to `das08_encode12`.  It should be set to
`das08_encode16` same as the 'das08jr/16' board.  After all, this board
has 16-bit AI resolution.

The description of the A/D LSB register at offset 0 seems incorrect in
the user manual "cio-das08jr-16-ao.pdf" as it implies that the AI
resolution is only 12 bits.  The diagrams of the A/D LSB and MSB
registers show 15 data bits and a sign bit, which matches what the
software expects for the `das08_encode16` AI encoding method.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/comedi/drivers/das08.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -385,7 +385,7 @@ static const struct das08_board_struct d
 	 .ai = das08_ai_rinsn,
 	 .ai_nbits = 16,
 	 .ai_pg = das08_pg_none,
-	 .ai_encoding = das08_encode12,
+	 .ai_encoding = das08_encode16,
 	 .ao = das08jr_ao_winsn,
 	 .ao_nbits = 16,
 	 .di = das08jr_di_rbits,

[ 096/135] staging: comedi: das08: Correct AO output for das08jr-16-ao

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

commit 61ed59ed09e6ad2b8395178ea5ad5f653bba08e3 upstream.

Don't zero out bits 15..12 of the data value in `das08jr_ao_winsn()` as
that knobbles the upper three-quarters of the output range for the
'das08jr-16-ao' board.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/comedi/drivers/das08.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index e5eb3b9..67a914a 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -378,7 +378,7 @@ das08jr_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
 	int chan;
 
 	lsb = data[0] & 0xff;
-	msb = (data[0] >> 8) & 0xf;
+	msb = (data[0] >> 8) & 0xff;
 
 	chan = CR_CHAN(insn->chanspec);
 

[ 097/135] staging: vt6656: [BUG] - Failed connection, incorrect endian.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit aa209eef3ce8419ff2926c2fa944dfbfb5afbacb upstream.

Hi,

This patch fixes a bug with driver failing to negotiate a connection.

The bug was traced to commit
203e4615ee9d9fa8d3506b9d0ef30095e4d5bc90
staging: vt6656: removed custom definitions of Ethernet packet types

In that patch, definitions in include/linux/if_ether.h replaced ones
in tether.h which had both big and little endian definitions.

include/linux/if_ether.h only refers to big endian values, cpu_to_be16
should be used for the correct endian architectures.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/vt6656/dpc.c  |    2 +-
 drivers/staging/vt6656/rxtx.c |   38 +++++++++++++++++++-------------------
 2 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/drivers/staging/vt6656/dpc.c b/drivers/staging/vt6656/dpc.c
index e4bdf2a..3aa895e 100644
--- a/drivers/staging/vt6656/dpc.c
+++ b/drivers/staging/vt6656/dpc.c
@@ -200,7 +200,7 @@ s_vProcessRxMACHeader (
     } else if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
         cbHeaderSize += 6;
         pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
-	if ((*pwType == cpu_to_le16(ETH_P_IPX)) ||
+	if ((*pwType == cpu_to_be16(ETH_P_IPX)) ||
 	    (*pwType == cpu_to_le16(0xF380))) {
 		cbHeaderSize -= 8;
             pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index bb46452..b6e04e7 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -1699,7 +1699,7 @@ s_bPacketToWirelessUsb(
     // 802.1H
     if (ntohs(psEthHeader->wType) > ETH_DATA_LEN) {
 	if (pDevice->dwDiagRefCount == 0) {
-		if ((psEthHeader->wType == cpu_to_le16(ETH_P_IPX)) ||
+		if ((psEthHeader->wType == cpu_to_be16(ETH_P_IPX)) ||
 		    (psEthHeader->wType == cpu_to_le16(0xF380))) {
 			memcpy((PBYTE) (pbyPayloadHead),
 			       abySNAP_Bridgetunnel, 6);
@@ -2838,10 +2838,10 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
     Packet_Type = skb->data[ETH_HLEN+1];
     Descriptor_type = skb->data[ETH_HLEN+1+1+2];
     Key_info = (skb->data[ETH_HLEN+1+1+2+1] << 8)|(skb->data[ETH_HLEN+1+1+2+2]);
-    if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) {
-	/* 802.1x OR eapol-key challenge frame transfer */
-	if (((Protocol_Version == 1) || (Protocol_Version == 2)) &&
-		(Packet_Type == 3)) {
+	if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) {
+		/* 802.1x OR eapol-key challenge frame transfer */
+		if (((Protocol_Version == 1) || (Protocol_Version == 2)) &&
+			(Packet_Type == 3)) {
                         bTxeapol_key = TRUE;
                        if(!(Key_info & BIT3) &&  //WPA or RSN group-key challenge
 			   (Key_info & BIT8) && (Key_info & BIT9)) {    //send 2/2 key
@@ -2987,19 +2987,19 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
         }
     }
 
-    if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) {
-        if (pDevice->byBBType != BB_TYPE_11A) {
-            pDevice->wCurrentRate = RATE_1M;
-            pDevice->byACKRate = RATE_1M;
-            pDevice->byTopCCKBasicRate = RATE_1M;
-            pDevice->byTopOFDMBasicRate = RATE_6M;
-        } else {
-            pDevice->wCurrentRate = RATE_6M;
-            pDevice->byACKRate = RATE_6M;
-            pDevice->byTopCCKBasicRate = RATE_1M;
-            pDevice->byTopOFDMBasicRate = RATE_6M;
-        }
-    }
+	if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) {
+		if (pDevice->byBBType != BB_TYPE_11A) {
+			pDevice->wCurrentRate = RATE_1M;
+			pDevice->byACKRate = RATE_1M;
+			pDevice->byTopCCKBasicRate = RATE_1M;
+			pDevice->byTopOFDMBasicRate = RATE_6M;
+		} else {
+			pDevice->wCurrentRate = RATE_6M;
+			pDevice->byACKRate = RATE_6M;
+			pDevice->byTopCCKBasicRate = RATE_1M;
+			pDevice->byTopOFDMBasicRate = RATE_6M;
+		}
+	}
 
     DBG_PRT(MSG_LEVEL_DEBUG,
 	    KERN_INFO "dma_tx: pDevice->wCurrentRate = %d\n",
@@ -3015,7 +3015,7 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
 
     if (bNeedEncryption == TRUE) {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ntohs Pkt Type=%04x\n", ntohs(pDevice->sTxEthHeader.wType));
-	if ((pDevice->sTxEthHeader.wType) == cpu_to_le16(ETH_P_PAE)) {
+	if ((pDevice->sTxEthHeader.wType) == cpu_to_be16(ETH_P_PAE)) {
 		bNeedEncryption = FALSE;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Pkt Type=%04x\n", (pDevice->sTxEthHeader.wType));
             if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {

[ 098/135] xhci: Recognize USB 3.0 devices as superspeed at powerup

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Manoj Iyer <manoj.iyer@canonical.com>

commit 29d214576f936db627ff62afb9ef438eea18bcd2 upstream.

On Intel Panther Point chipset USB 3.0 devices show up as
high-speed devices on powerup, but after an s3 cycle they are
correctly recognized as SuperSpeed. At powerup switch the port
to xHCI so that USB 3.0 devices are correctly recognized.

BugLink: http://bugs.launchpad.net/bugs/1000424

This patch should be backported to kernels as old as 3.0, that contain
commit ID 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support
EHCI/xHCI port switching."

Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/pci-quirks.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index c5e9e4a..486e812 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -870,9 +870,10 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 	/* Disable any BIOS SMIs and clear all SMI events*/
 	writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
 
+hc_init:
 	if (usb_is_intel_switchable_xhci(pdev))
 		usb_enable_xhci_ports(pdev);
-hc_init:
+
 	op_reg_base = base + XHCI_HC_LENGTH(readl(base));
 
 	/* Wait for the host controller to be ready before writing any

[ 099/135] Intel xhci: Only switch the switchable ports

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Keng-Yu Lin <kengyu@canonical.com>

commit a96874a2a92feaef607ddd3137277a788cb927a6 upstream.

With a previous patch to enable the EHCI/XHCI port switching, it switches
all the available ports.

The assumption is not correct because the BIOS may expect some ports
not switchable by the OS.

There are two more registers that contains the information of the switchable
and non-switchable ports.

This patch adds the checking code for the two register so that only the
switchable ports are altered.

This patch should be backported to kernels as old as 3.0, that contain
commit ID 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support
EHCI/xHCI port switching."

Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/pci-quirks.c |   27 +++++++++++++++++++++++----
 1 file changed, 23 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 486e812..20b9f45 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -75,7 +75,9 @@
 #define	NB_PIF0_PWRDOWN_1	0x01100013
 
 #define USB_INTEL_XUSB2PR      0xD0
+#define USB_INTEL_USB2PRM      0xD4
 #define USB_INTEL_USB3_PSSEN   0xD8
+#define USB_INTEL_USB3PRM      0xDC
 
 static struct amd_chipset_info {
 	struct pci_dev	*nb_dev;
@@ -772,10 +774,18 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 		return;
 	}
 
-	ports_available = 0xffffffff;
+	/* Read USB3PRM, the USB 3.0 Port Routing Mask Register
+	 * Indicate the ports that can be changed from OS.
+	 */
+	pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
+			&ports_available);
+
+	dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
+			ports_available);
+
 	/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
-	 * Register, to turn on SuperSpeed terminations for all
-	 * available ports.
+	 * Register, to turn on SuperSpeed terminations for the
+	 * switchable ports.
 	 */
 	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
 			cpu_to_le32(ports_available));
@@ -785,7 +795,16 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 	dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
 			"under xHCI: 0x%x\n", ports_available);
 
-	ports_available = 0xffffffff;
+	/* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
+	 * Indicate the USB 2.0 ports to be controlled by the xHCI host.
+	 */
+
+	pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
+			&ports_available);
+
+	dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
+			ports_available);
+
 	/* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
 	 * switch the USB 2.0 power and data lines over to the xHCI
 	 * host.

[ 100/135] rt2x00: Identify ASUS USB-N53 device.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gertjan van Wingerde <gwingerde@gmail.com>

commit 177ef8360fabdc49ff08d2598c06e7f7a36b53e3 upstream.

This is an RT3572 based device.

Signed-off-by: Maximilian Engelhardt <maxi@daemonizer.de>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo Van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/rt2x00/rt2800usb.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 6cf3365..6681bfc 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1157,6 +1157,8 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x1690, 0x0744) },
 	{ USB_DEVICE(0x1690, 0x0761) },
 	{ USB_DEVICE(0x1690, 0x0764) },
+	/* ASUS */
+	{ USB_DEVICE(0x0b05, 0x179d) },
 	/* Cisco */
 	{ USB_DEVICE(0x167b, 0x4001) },
 	/* EnGenius */
@@ -1222,7 +1224,6 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x0b05, 0x1760) },
 	{ USB_DEVICE(0x0b05, 0x1761) },
 	{ USB_DEVICE(0x0b05, 0x1790) },
-	{ USB_DEVICE(0x0b05, 0x179d) },
 	/* AzureWave */
 	{ USB_DEVICE(0x13d3, 0x3262) },
 	{ USB_DEVICE(0x13d3, 0x3284) },

[ 101/135] rt2x00: Fix word size of rt2500usb MAC_CSR19 register.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gertjan van Wingerde <gwingerde@gmail.com>

commit 6ced58a5dbb94dbfbea1b33ca3c56d1e929cd548 upstream.

The register is 16 bits wide, not 32.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo Van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/rt2x00/rt2500usb.c |    2 +-
 drivers/net/wireless/rt2x00/rt2500usb.h |   16 ++++++++--------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 3aae36b..b3a1d73 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -283,7 +283,7 @@ static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 	u16 reg;
 
 	rt2500usb_register_read(rt2x00dev, MAC_CSR19, &reg);
-	return rt2x00_get_field32(reg, MAC_CSR19_BIT7);
+	return rt2x00_get_field16(reg, MAC_CSR19_BIT7);
 }
 
 #ifdef CONFIG_RT2X00_LIB_LEDS
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index b493306..192531d 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -189,14 +189,14 @@
  * MAC_CSR19: GPIO control register.
  */
 #define MAC_CSR19			0x0426
-#define MAC_CSR19_BIT0			FIELD32(0x0001)
-#define MAC_CSR19_BIT1			FIELD32(0x0002)
-#define MAC_CSR19_BIT2			FIELD32(0x0004)
-#define MAC_CSR19_BIT3			FIELD32(0x0008)
-#define MAC_CSR19_BIT4			FIELD32(0x0010)
-#define MAC_CSR19_BIT5			FIELD32(0x0020)
-#define MAC_CSR19_BIT6			FIELD32(0x0040)
-#define MAC_CSR19_BIT7			FIELD32(0x0080)
+#define MAC_CSR19_BIT0			FIELD16(0x0001)
+#define MAC_CSR19_BIT1			FIELD16(0x0002)
+#define MAC_CSR19_BIT2			FIELD16(0x0004)
+#define MAC_CSR19_BIT3			FIELD16(0x0008)
+#define MAC_CSR19_BIT4			FIELD16(0x0010)
+#define MAC_CSR19_BIT5			FIELD16(0x0020)
+#define MAC_CSR19_BIT6			FIELD16(0x0040)
+#define MAC_CSR19_BIT7			FIELD16(0x0080)
 
 /*
  * MAC_CSR20: LED control register.

[ 102/135] rt2x00: Fix rfkill polling prior to interface start.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gertjan van Wingerde <gwingerde@gmail.com>

commit a396e10019eaf3809b0219c966865aaafec12630 upstream.

We need to program the rfkill switch GPIO pin direction to input at
device initialization time, not only when the interface is brought up.
Doing this only when the interface is brought up could lead to rfkill
detecting the switch is turned on erroneously and inability to create
the interface and bringing it up.

Reported-and-tested-by: Andreas Messer <andi@bastelmap.de>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo Van Doorn <ivdoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/rt2x00/rt2400pci.c |    9 +++++++++
 drivers/net/wireless/rt2x00/rt2400pci.h |    1 +
 drivers/net/wireless/rt2x00/rt2500pci.c |    9 +++++++++
 drivers/net/wireless/rt2x00/rt2500usb.c |    9 +++++++++
 drivers/net/wireless/rt2x00/rt2500usb.h |    1 +
 drivers/net/wireless/rt2x00/rt2800pci.c |    9 +++++++++
 drivers/net/wireless/rt2x00/rt2800usb.c |    9 +++++++++
 drivers/net/wireless/rt2x00/rt61pci.c   |    9 +++++++++
 drivers/net/wireless/rt2x00/rt61pci.h   |    1 +
 drivers/net/wireless/rt2x00/rt73usb.c   |    9 +++++++++
 drivers/net/wireless/rt2x00/rt73usb.h   |    3 +++
 11 files changed, 69 insertions(+)

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 8b9dbd7..64328af 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1611,6 +1611,7 @@ static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -1624,6 +1625,14 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
+	rt2x00_set_field32(&reg, GPIOCSR_BIT8, 1);
+	rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt2400pci_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index d3a4a68..7564ae9 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -670,6 +670,7 @@
 #define GPIOCSR_BIT5			FIELD32(0x00000020)
 #define GPIOCSR_BIT6			FIELD32(0x00000040)
 #define GPIOCSR_BIT7			FIELD32(0x00000080)
+#define GPIOCSR_BIT8			FIELD32(0x00000100)
 
 /*
  * BBPPCSR: BBP Pin control register.
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index d2cf8a4..3de0406 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1929,6 +1929,7 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -1942,6 +1943,14 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
+	rt2x00_set_field32(&reg, GPIOCSR_DIR0, 1);
+	rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt2500pci_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index b3a1d73..89fee31 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1768,6 +1768,7 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u16 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -1781,6 +1782,14 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2500usb_register_read(rt2x00dev, MAC_CSR19, &reg);
+	rt2x00_set_field16(&reg, MAC_CSR19_BIT8, 0);
+	rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt2500usb_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index 192531d..196bd51 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -197,6 +197,7 @@
 #define MAC_CSR19_BIT5			FIELD16(0x0020)
 #define MAC_CSR19_BIT6			FIELD16(0x0040)
 #define MAC_CSR19_BIT7			FIELD16(0x0080)
+#define MAC_CSR19_BIT8			FIELD16(0x0100)
 
 /*
  * MAC_CSR20: LED control register.
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 98aa426..4765bbd 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -983,6 +983,7 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -996,6 +997,14 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+	rt2x00_set_field32(&reg, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+	rt2x00pci_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt2800_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 6681bfc..52a32b5 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -736,6 +736,7 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -749,6 +750,14 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+	rt2x00_set_field32(&reg, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+	rt2x00usb_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt2800_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 3f7bc5c..b8ec961 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2832,6 +2832,7 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Disable power saving.
@@ -2850,6 +2851,14 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
+	rt2x00_set_field32(&reg, MAC_CSR13_BIT13, 1);
+	rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt61pci_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index e3cd6db..8f3da5a 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -372,6 +372,7 @@ struct hw_pairwise_ta_entry {
 #define MAC_CSR13_BIT10			FIELD32(0x00000400)
 #define MAC_CSR13_BIT11			FIELD32(0x00000800)
 #define MAC_CSR13_BIT12			FIELD32(0x00001000)
+#define MAC_CSR13_BIT13			FIELD32(0x00002000)
 
 /*
  * MAC_CSR14: LED control register.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index ba6e434..248436c 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2177,6 +2177,7 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -2190,6 +2191,14 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00usb_register_read(rt2x00dev, MAC_CSR13, &reg);
+	rt2x00_set_field32(&reg, MAC_CSR13_BIT15, 0);
+	rt2x00usb_register_write(rt2x00dev, MAC_CSR13, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt73usb_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 9f6b470..df1cc11 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -282,6 +282,9 @@ struct hw_pairwise_ta_entry {
 #define MAC_CSR13_BIT10			FIELD32(0x00000400)
 #define MAC_CSR13_BIT11			FIELD32(0x00000800)
 #define MAC_CSR13_BIT12			FIELD32(0x00001000)
+#define MAC_CSR13_BIT13			FIELD32(0x00002000)
+#define MAC_CSR13_BIT14			FIELD32(0x00004000)
+#define MAC_CSR13_BIT15			FIELD32(0x00008000)
 
 /*
  * MAC_CSR14: LED control register.

[ 103/135] rt2800usb: Added rx packet length validity check

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergei Poselenov <sposelenov@emcraft.com>

commit efd5d6b03bd9c9e0df646c56fb5f4f3e25e5c1ac upstream.

On our system (ARM Cortex-M3 SOC running linux-2.6.33)
frequent crashes were observed in the rt2800usb module
because of the invalid length of the received packet (3392,
46920...). This patch adds the sanity check on the packet
legth. Also, changed WARNING to ERROR in rt2x00lib_rxdone()
so that the bad packet condition would be noticed.

The fix was tested on the latest compat-wireless-3.5.1-1-snpc.

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/rt2x00/rt2800usb.c |   10 +++++++++-
 drivers/net/wireless/rt2x00/rt2x00dev.c |    2 +-
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 52a32b5..6b4226b 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -667,8 +667,16 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 	skb_pull(entry->skb, RXINFO_DESC_SIZE);
 
 	/*
-	 * FIXME: we need to check for rx_pkt_len validity
+	 * Check for rx_pkt_len validity. Return if invalid, leaving
+	 * rxdesc->size zeroed out by the upper level.
 	 */
+	if (unlikely(rx_pkt_len == 0 ||
+			rx_pkt_len > entry->queue->data_size)) {
+		ERROR(entry->queue->rt2x00dev,
+			"Bad frame size %d, forcing to 0\n", rx_pkt_len);
+		return;
+	}
+
 	rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
 
 	/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index a6b88bd..3f07e36 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -629,7 +629,7 @@ void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp)
 	 */
 	if (unlikely(rxdesc.size == 0 ||
 		     rxdesc.size > entry->queue->data_size)) {
-		WARNING(rt2x00dev, "Wrong frame size %d max %d.\n",
+		ERROR(rt2x00dev, "Wrong frame size %d max %d.\n",
 			rxdesc.size, entry->queue->data_size);
 		dev_kfree_skb(entry->skb);
 		goto renew_skb;

[ 104/135] staging: zcache: fix cleancache race condition with shrinker

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seth Jennings <sjenning@linux.vnet.ibm.com>

commit 6d7d9798ad5c97ee4e911dd070dc12dc5ae55bd0 upstream.

This patch fixes a race condition that results in memory
corruption when using cleancache.

The race exists between the zcache shrinker handler,
shrink_zcache_memory() and cleancache_get_page().

In most cases, the shrinker will both evict a zbpg
from its buddy list and flush it from tmem before a
cleancache_get_page() occurs on that page. A subsequent
cleancache_get_page() will fail in the tmem layer.

In the rare case that two occur together and the
cleancache_get_page() path gets through the tmem
layer before the shrinker path can flush tmem,
zbud_decompress() does a check to see if the zbpg is a
"zombie", i.e. not on a buddy list, which means the shrinker
is in the process of reclaiming it. If the zbpg is a zombie,
zbud_decompress() returns -EINVAL.

However, this return code is being ignored by the caller,
zcache_pampd_get_data_and_free(), which results in the
caller of cleancache_get_page() thinking that the page has
been properly retrieved when it has not.

This patch modifies zcache_pampd_get_data_and_free() to
convey the failure up the stack so that the caller of
cleancache_get_page() knows the page retrieval failed.

This needs to be applied to stable trees as well.
zcache-main.c was named zcache.c before v3.1, so
I'm not sure how you want to handle trees earlier
than that.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/zcache/zcache-main.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c
index c214977..52b43b7 100644
--- a/drivers/staging/zcache/zcache-main.c
+++ b/drivers/staging/zcache/zcache-main.c
@@ -1251,13 +1251,12 @@ static int zcache_pampd_get_data_and_free(char *data, size_t *bufsize, bool raw,
 					void *pampd, struct tmem_pool *pool,
 					struct tmem_oid *oid, uint32_t index)
 {
-	int ret = 0;
-
 	BUG_ON(!is_ephemeral(pool));
-	zbud_decompress((struct page *)(data), pampd);
+	if (zbud_decompress((struct page *)(data), pampd) < 0)
+		return -EINVAL;
 	zbud_free_and_delist((struct zbud_hdr *)pampd);
 	atomic_dec(&zcache_curr_eph_pampd_count);
-	return ret;
+	return 0;
 }
 
 /*

[ 105/135] xhci: Switch PPT ports to EHCI on shutdown.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit e95829f474f0db3a4d940cae1423783edd966027 upstream.

The Intel desktop boards DH77EB and DH77DF have a hardware issue that
can be worked around by BIOS.  If the USB ports are switched to xHCI on
shutdown, the xHCI host will send a spurious interrupt, which will wake
the system.  Some BIOS will work around this, but not all.

The bug can be avoided if the USB ports are switched back to EHCI on
shutdown.  The Intel Windows driver switches the ports back to EHCI, so
change the Linux xHCI driver to do the same.

Unfortunately, we can't tell the two effected boards apart from other
working motherboards, because the vendors will change the DMI strings
for the DH77EB and DH77DF boards to their own custom names.  One example
is Compulab's mini-desktop, the Intense-PC.  Instead, key off the
Panther Point xHCI host PCI vendor and device ID, and switch the ports
over for all PPT xHCI hosts.

The only impact this will have on non-effected boards is to add a couple
hundred milliseconds delay on boot when the BIOS has to switch the ports
over from EHCI to xHCI.

This patch should be backported to kernels as old as 3.0, that contain
the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support
EHCI/xHCI port switching."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Denis Turischev <denis@compulab.co.il>
Tested-by: Denis Turischev <denis@compulab.co.il>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/pci-quirks.c |    7 +++++++
 drivers/usb/host/pci-quirks.h |    1 +
 drivers/usb/host/xhci-pci.c   |    9 +++++++++
 drivers/usb/host/xhci.c       |    3 +++
 drivers/usb/host/xhci.h       |    1 +
 5 files changed, 21 insertions(+)

--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -819,6 +819,13 @@ void usb_enable_xhci_ports(struct pci_de
 }
 EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
 
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
+{
+	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
+	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
+}
+EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
+
 /**
  * PCI Quirks for xHCI.
  *
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -10,6 +10,7 @@ void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
 bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
 void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 #else
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -90,6 +90,15 @@ static void xhci_pci_quirks(struct devic
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
 		xhci->quirks |= XHCI_SW_BW_CHECKING;
+		/*
+		 * PPT desktop boards DH77EB and DH77DF will power back on after
+		 * a few seconds of being shutdown.  The fix for this is to
+		 * switch the ports from xHCI to EHCI on shutdown.  We can't use
+		 * DMI information to find those particular boards (since each
+		 * vendor will change the board name), so we have to key off all
+		 * PPT chipsets.
+		 */
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -648,6 +648,9 @@ void xhci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
+	if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
+		usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
+
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
 	spin_unlock_irq(&xhci->lock);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1471,6 +1471,7 @@ struct xhci_hcd {
 #define	XHCI_SW_BW_CHECKING	(1 << 8)
 #define XHCI_AMD_0x96_HOST	(1 << 9)
 #define XHCI_TRUST_TX_LENGTH	(1 << 10)
+#define XHCI_SPURIOUS_REBOOT	(1 << 13)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */

[ 106/135] xhci: Fix a logical vs bitwise AND bug

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 052c7f9ffb0e95843e75448d02664459253f9ff8 upstream.

The intent was to test whether the flag was set.

This patch should be backported to stable kernels as old as 3.0, since
it fixes a bug in commit e95829f474f0db3a4d940cae1423783edd966027 "xhci:
Switch PPT ports to EHCI on shutdown.", which was marked for stable.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/xhci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c59d5b5..617b0a7 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -659,7 +659,7 @@ void xhci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
-	if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
+	if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
 		usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
 
 	spin_lock_irq(&xhci->lock);

[ 107/135] xhci: Make handover code more robust

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Garrett <mjg@redhat.com>

commit e955a1cd086de4d165ae0f4c7be7289d84b63bdc upstream.

My test platform (Intel DX79SI) boots reliably under BIOS, but frequently
crashes when booting via UEFI. I finally tracked this down to the xhci
handoff code. It seems that reads from the device occasionally just return
0xff, resulting in xhci_find_next_cap_offset generating a value that's
larger than the resource region. We then oops when attempting to read the
value. Sanity checking that value lets us avoid the crash.

I've no idea what's causing the underlying problem, and xhci still doesn't
actually *work* even with this, but the machine at least boots which will
probably make further debugging easier.

This should be backported to kernels as old as 2.6.31, that contain the
commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci: BIOS handoff
and HW initialization."

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/pci-quirks.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 20b9f45..966d148 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -841,12 +841,12 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 	void __iomem *op_reg_base;
 	u32 val;
 	int timeout;
+	int len = pci_resource_len(pdev, 0);
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
 
-	base = ioremap_nocache(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0));
+	base = ioremap_nocache(pci_resource_start(pdev, 0), len);
 	if (base == NULL)
 		return;
 
@@ -856,9 +856,17 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 	 */
 	ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
 	do {
+		if ((ext_cap_offset + sizeof(val)) > len) {
+			/* We're reading garbage from the controller */
+			dev_warn(&pdev->dev,
+				 "xHCI controller failing to respond");
+			return;
+		}
+
 		if (!ext_cap_offset)
 			/* We've reached the end of the extended capabilities */
 			goto hc_init;
+
 		val = readl(base + ext_cap_offset);
 		if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
 			break;

[ 108/135] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Alexis R. Cortes" <alexis.cortes@ti.com>

commit 71c731a296f1b08a3724bd1b514b64f1bda87a23 upstream.

This patch is intended to work around a known issue on the
SN65LVPE502CP USB3.0 re-driver that can delay the negotiation
between a device and the host past the usual handshake timeout.

If that happens on the first insertion, the host controller
port will enter in Compliance Mode and NO port status event will
be generated (as per xHCI Spec) making impossible to detect this
event by software. The port will remain in compliance mode until
a warm reset is applied to it.

As a result of this, the port will seem "dead" to the user and no
device connections or disconnections will be detected.

For solving this, the patch creates a timer which polls every 2
seconds the link state of each host controller's port (this
by reading the PORTSC register) and recovers the port by issuing a
Warm reset every time Compliance mode is detected.

If a xHC USB3.0 port has previously entered to U0, the compliance
mode issue will NOT occur only until system resumes from
sleep/hibernate, therefore, the compliance mode timer is stopped
when all xHC USB 3.0 ports have entered U0. The timer is initialized
again after each system resume.

Since the issue is being caused by a piece of hardware, the timer
will be enabled ONLY on those systems that have the SN65LVPE502CP
installed (this patch uses DMI strings for detecting those systems)
therefore making this patch to act as a quirk (XHCI_COMP_MODE_QUIRK
has been added to the xhci stack).

This patch applies for these systems:
Vendor: Hewlett-Packard. System Models: Z420, Z620 and Z820.

This patch should be backported to kernels as old as 3.2, as that was
the first kernel to support warm reset.  The kernels will need to
contain both commit 10d674a82e553cb8a1f41027bb3c3e309b3f6804 "USB: When
hot reset for USB3 fails, try warm reset" and commit
8bea2bd37df08aaa599aa361a9f8b836ba98e554 "usb: Add support for root hub
port status CAS".  The first patch add warm reset support, and the
second patch modifies the USB core to issue a warm reset when the port
is in compliance mode.

Signed-off-by: Alexis R. Cortes <alexis.cortes@ti.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/xhci-hub.c |   42 +++++++++++++++
 drivers/usb/host/xhci.c     |  121 +++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/host/xhci.h     |    6 +++
 3 files changed, 169 insertions(+)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -469,11 +469,48 @@ static void xhci_hub_report_link_state(u
 		 * when this bit is set.
 		 */
 		pls |= USB_PORT_STAT_CONNECTION;
+	} else {
+		/*
+		 * If CAS bit isn't set but the Port is already at
+		 * Compliance Mode, fake a connection so the USB core
+		 * notices the Compliance state and resets the port.
+		 * This resolves an issue generated by the SN65LVPE502CP
+		 * in which sometimes the port enters compliance mode
+		 * caused by a delay on the host-device negotiation.
+		 */
+		if (pls == USB_SS_PORT_LS_COMP_MOD)
+			pls |= USB_PORT_STAT_CONNECTION;
 	}
+
 	/* update status field */
 	*status |= pls;
 }
 
+/*
+ * Function for Compliance Mode Quirk.
+ *
+ * This Function verifies if all xhc USB3 ports have entered U0, if so,
+ * the compliance mode timer is deleted. A port won't enter
+ * compliance mode if it has previously entered U0.
+ */
+void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
+{
+	u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1);
+	bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
+
+	if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+		return;
+
+	if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
+		xhci->port_status_u0 |= 1 << wIndex;
+		if (xhci->port_status_u0 == all_ports_seen_u0) {
+			del_timer_sync(&xhci->comp_mode_recovery_timer);
+			xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n");
+			xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n");
+		}
+	}
+}
+
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		u16 wIndex, char *buf, u16 wLength)
 {
@@ -618,6 +655,11 @@ int xhci_hub_control(struct usb_hcd *hcd
 		/* Update Port Link State for super speed ports*/
 		if (hcd->speed == HCD_USB3) {
 			xhci_hub_report_link_state(&status, temp);
+			/*
+			 * Verify if all USB3 Ports Have entered U0 already.
+			 * Delete Compliance Mode Timer if so.
+			 */
+			xhci_del_comp_mod_timer(xhci, temp, wIndex);
 		}
 		if (bus_state->port_c_suspend & (1 << wIndex))
 			status |= 1 << USB_PORT_FEAT_C_SUSPEND;
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
+#include <linux/dmi.h>
 
 #include "xhci.h"
 
@@ -387,6 +388,95 @@ static void xhci_msix_sync_irqs(struct x
 
 #endif
 
+static void compliance_mode_recovery(unsigned long arg)
+{
+	struct xhci_hcd *xhci;
+	struct usb_hcd *hcd;
+	u32 temp;
+	int i;
+
+	xhci = (struct xhci_hcd *)arg;
+
+	for (i = 0; i < xhci->num_usb3_ports; i++) {
+		temp = xhci_readl(xhci, xhci->usb3_ports[i]);
+		if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+			/*
+			 * Compliance Mode Detected. Letting USB Core
+			 * handle the Warm Reset
+			 */
+			xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n",
+					i + 1);
+			xhci_dbg(xhci, "Attempting Recovery routine!\n");
+			hcd = xhci->shared_hcd;
+
+			if (hcd->state == HC_STATE_SUSPENDED)
+				usb_hcd_resume_root_hub(hcd);
+
+			usb_hcd_poll_rh_status(hcd);
+		}
+	}
+
+	if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1))
+		mod_timer(&xhci->comp_mode_recovery_timer,
+			jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+/*
+ * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver
+ * that causes ports behind that hardware to enter compliance mode sometimes.
+ * The quirk creates a timer that polls every 2 seconds the link state of
+ * each host controller's port and recovers it by issuing a Warm reset
+ * if Compliance mode is detected, otherwise the port will become "dead" (no
+ * device connections or disconnections will be detected anymore). Becasue no
+ * status event is generated when entering compliance mode (per xhci spec),
+ * this quirk is needed on systems that have the failing hardware installed.
+ */
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+	xhci->port_status_u0 = 0;
+	init_timer(&xhci->comp_mode_recovery_timer);
+
+	xhci->comp_mode_recovery_timer.data = (unsigned long) xhci;
+	xhci->comp_mode_recovery_timer.function = compliance_mode_recovery;
+	xhci->comp_mode_recovery_timer.expires = jiffies +
+			msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+
+	set_timer_slack(&xhci->comp_mode_recovery_timer,
+			msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+	add_timer(&xhci->comp_mode_recovery_timer);
+	xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n");
+}
+
+/*
+ * This function identifies the systems that have installed the SN65LVPE502CP
+ * USB3.0 re-driver and that need the Compliance Mode Quirk.
+ * Systems:
+ * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
+ */
+static bool compliance_mode_recovery_timer_quirk_check(void)
+{
+	const char *dmi_product_name, *dmi_sys_vendor;
+
+	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+
+	if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
+		return false;
+
+	if (strstr(dmi_product_name, "Z420") ||
+			strstr(dmi_product_name, "Z620") ||
+			strstr(dmi_product_name, "Z820"))
+		return true;
+
+	return false;
+}
+
+static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
+{
+	return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1));
+}
+
+
 /*
  * Initialize memory for HCD and xHC (one-time init).
  *
@@ -410,6 +500,12 @@ int xhci_init(struct usb_hcd *hcd)
 	retval = xhci_mem_init(xhci, GFP_KERNEL);
 	xhci_dbg(xhci, "Finished xhci_init\n");
 
+	/* Initializing Compliance Mode Recovery Data If Needed */
+	if (compliance_mode_recovery_timer_quirk_check()) {
+		xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+		compliance_mode_recovery_timer_init(xhci);
+	}
+
 	return retval;
 }
 
@@ -618,6 +714,11 @@ void xhci_stop(struct usb_hcd *hcd)
 	del_timer_sync(&xhci->event_ring_timer);
 #endif
 
+	/* Deleting Compliance Mode Recovery Timer */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+			(!(xhci_all_ports_seen_u0(xhci))))
+		del_timer_sync(&xhci->comp_mode_recovery_timer);
+
 	if (xhci->quirks & XHCI_AMD_PLL_FIX)
 		usb_amd_dev_put();
 
@@ -794,6 +895,16 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	}
 	spin_unlock_irq(&xhci->lock);
 
+	/*
+	 * Deleting Compliance Mode Recovery Timer because the xHCI Host
+	 * is about to be suspended.
+	 */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+			(!(xhci_all_ports_seen_u0(xhci)))) {
+		del_timer_sync(&xhci->comp_mode_recovery_timer);
+		xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n");
+	}
+
 	/* step 5: remove core well power */
 	/* synchronize irq when using MSI-X */
 	xhci_msix_sync_irqs(xhci);
@@ -926,6 +1037,16 @@ int xhci_resume(struct xhci_hcd *xhci, b
 		usb_hcd_resume_root_hub(hcd);
 		usb_hcd_resume_root_hub(xhci->shared_hcd);
 	}
+
+	/*
+	 * If system is subject to the Quirk, Compliance Mode Timer needs to
+	 * be re-initialized Always after a system resume. Ports are subject
+	 * to suffer the Compliance Mode issue again. It doesn't matter if
+	 * ports have entered previously to U0 before system's suspension.
+	 */
+	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+		compliance_mode_recovery_timer_init(xhci);
+
 	return retval;
 }
 #endif	/* CONFIG_PM */
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1472,6 +1472,7 @@ struct xhci_hcd {
 #define XHCI_AMD_0x96_HOST	(1 << 9)
 #define XHCI_TRUST_TX_LENGTH	(1 << 10)
 #define XHCI_SPURIOUS_REBOOT	(1 << 13)
+#define XHCI_COMP_MODE_QUIRK	(1 << 14)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
@@ -1488,6 +1489,11 @@ struct xhci_hcd {
 	unsigned		sw_lpm_support:1;
 	/* support xHCI 1.0 spec USB2 hardware LPM */
 	unsigned		hw_lpm_support:1;
+	/* Compliance Mode Recovery Data */
+	struct timer_list	comp_mode_recovery_timer;
+	u32    			port_status_u0;
+/* Compliance Mode Timer Triggered every 2 seconds */
+#define COMP_MODE_RCVRY_MSECS 2000
 };
 
 /* convert between an HCD pointer and the corresponding EHCI_HCD */

[ 109/135] usb: host: xhci: fix compilation error for non-PCI based stacks

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Moiz Sonasath <m-sonasath@ti.com>

commit 296365781903226a3fb8758901eaeec09d2798e4 upstream.

For non PCI-based stacks, this function call
usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
made from xhci_shutdown is not applicable.

Ideally, we wouldn't have any PCI-specific code on
a generic driver such as the xHCI stack, but it looks
like we should just stub usb_disable_xhci_ports() out
for non-PCI devices.

[ balbi@ti.com: slight improvement to commit log ]

This patch should be backported to kernels as old as 3.0, since the
commit it fixes (e95829f474f0db3a4d940cae1423783edd966027 "xhci: Switch
PPT ports to EHCI on shutdown.") was marked for stable.

Signed-off-by: Moiz Sonasath<m-sonasath@ti.com>
Signed-off-by: Ruchika Kharwar <ruchika@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/pci-quirks.h |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index ef004a5..7f69a39 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -15,6 +15,7 @@ void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
 static inline void usb_amd_dev_put(void) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 #endif  /* CONFIG_PCI */
 
 #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */

[ 110/135] tty: serial: imx: console write routing is unsafe on SMP

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xinyu Chen <xinyu.chen@freescale.com>

commit 9ec1882df244c4ee1baa692676fef5e8b0f5487d upstream.

The console feature's write routing is unsafe on SMP with
the startup/shutdown call.

There could be several consumers of the console
* the kernel printk
* the init process using /dev/kmsg to call printk to show log
* shell, which open /dev/console and write with sys_write()

The shell goes into the normal uart open/write routing,
but the other two go into the console operations.
The open routing calls imx serial startup, which will write USR1/2
register without any lock and critical with imx_console_write call.

Add a spin_lock for startup/shutdown/console_write routing.

This patch is a port from Freescale's Android kernel.

Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/tty/serial/imx.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -725,6 +725,7 @@ static int imx_startup(struct uart_port
 		}
 	}
 
+	spin_lock_irqsave(&sport->port.lock, flags);
 	/*
 	 * Finally, clear and enable interrupts
 	 */
@@ -778,7 +779,6 @@ static int imx_startup(struct uart_port
 	/*
 	 * Enable modem status interrupts
 	 */
-	spin_lock_irqsave(&sport->port.lock,flags);
 	imx_enable_ms(&sport->port);
 	spin_unlock_irqrestore(&sport->port.lock,flags);
 
@@ -808,10 +808,13 @@ static void imx_shutdown(struct uart_por
 {
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
+	unsigned long flags;
 
+	spin_lock_irqsave(&sport->port.lock, flags);
 	temp = readl(sport->port.membase + UCR2);
 	temp &= ~(UCR2_TXEN);
 	writel(temp, sport->port.membase + UCR2);
+	spin_unlock_irqrestore(&sport->port.lock, flags);
 
 	if (USE_IRDA(sport)) {
 		struct imxuart_platform_data *pdata;
@@ -840,12 +843,14 @@ static void imx_shutdown(struct uart_por
 	 * Disable all interrupts, port and break condition.
 	 */
 
+	spin_lock_irqsave(&sport->port.lock, flags);
 	temp = readl(sport->port.membase + UCR1);
 	temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
 	if (USE_IRDA(sport))
 		temp &= ~(UCR1_IREN);
 
 	writel(temp, sport->port.membase + UCR1);
+	spin_unlock_irqrestore(&sport->port.lock, flags);
 }
 
 static void
@@ -1119,6 +1124,9 @@ imx_console_write(struct console *co, co
 {
 	struct imx_port *sport = imx_ports[co->index];
 	unsigned int old_ucr1, old_ucr2, ucr1;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sport->port.lock, flags);
 
 	/*
 	 *	First, save UCR1/2 and then disable interrupts
@@ -1145,6 +1153,8 @@ imx_console_write(struct console *co, co
 
 	writel(old_ucr1, sport->port.membase + UCR1);
 	writel(old_ucr2, sport->port.membase + UCR2);
+
+	spin_unlock_irqrestore(&sport->port.lock, flags);
 }
 
 /*

[ 111/135] tty: serial: imx: dont reinit clock in imx_setup_ufcr()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dirk Behme <dirk.behme@de.bosch.com>

commit 7be0670f7b9198382938a03ff3db7f47ef6b4780 upstream.

Remove the clock configuration from imx_setup_ufcr(). This
isn't needed here and will cause garbage output if done.

To be be sure that we only touch the bits we want (TXTL and RXTL)
we have to mask out all other bits of the UFCR register. Add
one non-existing bit macro for this, too (bit 6, DCEDTE on i.MX6).

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
CC: Shawn Guo <shawn.guo@linaro.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Troy Kisky <troy.kisky@boundarydevices.com>
CC: Xinyu Chen <xinyu.chen@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: deleted code in imx_setup_ufcr() refers to
 sport->clk not sport->clk_per]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/tty/serial/imx.c |   18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -130,6 +130,7 @@
 #define  UCR4_OREN  	 (1<<1)  /* Receiver overrun interrupt enable */
 #define  UCR4_DREN  	 (1<<0)  /* Recv data ready interrupt enable */
 #define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
+#define  UFCR_DCEDTE	 (1<<6)  /* DCE/DTE mode select */
 #define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
 #define  UFCR_RFDIV_REG(x)	(((x) < 7 ? 6 - (x) : 6) << 7)
 #define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
@@ -635,22 +636,11 @@ static void imx_break_ctl(struct uart_po
 static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 {
 	unsigned int val;
-	unsigned int ufcr_rfdiv;
-
-	/* set receiver / transmitter trigger level.
-	 * RFDIV is set such way to satisfy requested uartclk value
-	 */
-	val = TXTL << 10 | RXTL;
-	ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
-			/ sport->port.uartclk;
-
-	if(!ufcr_rfdiv)
-		ufcr_rfdiv = 1;
-
-	val |= UFCR_RFDIV_REG(ufcr_rfdiv);
 
+	/* set receiver / transmitter trigger level */
+	val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
+	val |= TXTL << UFCR_TXTL_SHF | RXTL;
 	writel(val, sport->port.membase + UFCR);
-
 	return 0;
 }
 

[ 112/135] ibmveth: Fix alignment of rx queue bug

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Santiago Leon <santil@linux.vnet.ibm.com>

commit d90c92fee89ccd75ef2646f3bde0b4c0450666c3 upstream.

This patch fixes a bug found by Nish Aravamudan
(https://lkml.org/lkml/2012/5/15/220) where the driver is not following
the spec (it is not aligning the rx buffer on a 16-byte boundary) and the
hypervisor aborts the registration, making the device unusable.

The fix follows BenH's recommendation (https://lkml.org/lkml/2012/7/20/461)
to replace the kmalloc+map for a single call to dma_alloc_coherent()
because that function always aligns to a 16-byte boundary.

The stable trees will run into this bug whenever the rx buffer kmalloc call
returns something not aligned on a 16-byte boundary.

Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/ethernet/ibm/ibmveth.c |   26 +++++++++-----------------
 1 file changed, 9 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index 9010cea..b68d28a 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -472,14 +472,9 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
 	}
 
 	if (adapter->rx_queue.queue_addr != NULL) {
-		if (!dma_mapping_error(dev, adapter->rx_queue.queue_dma)) {
-			dma_unmap_single(dev,
-					adapter->rx_queue.queue_dma,
-					adapter->rx_queue.queue_len,
-					DMA_BIDIRECTIONAL);
-			adapter->rx_queue.queue_dma = DMA_ERROR_CODE;
-		}
-		kfree(adapter->rx_queue.queue_addr);
+		dma_free_coherent(dev, adapter->rx_queue.queue_len,
+				  adapter->rx_queue.queue_addr,
+				  adapter->rx_queue.queue_dma);
 		adapter->rx_queue.queue_addr = NULL;
 	}
 
@@ -556,10 +551,13 @@ static int ibmveth_open(struct net_device *netdev)
 		goto err_out;
 	}
 
+	dev = &adapter->vdev->dev;
+
 	adapter->rx_queue.queue_len = sizeof(struct ibmveth_rx_q_entry) *
 						rxq_entries;
-	adapter->rx_queue.queue_addr = kmalloc(adapter->rx_queue.queue_len,
-						GFP_KERNEL);
+	adapter->rx_queue.queue_addr =
+	    dma_alloc_coherent(dev, adapter->rx_queue.queue_len,
+			       &adapter->rx_queue.queue_dma, GFP_KERNEL);
 
 	if (!adapter->rx_queue.queue_addr) {
 		netdev_err(netdev, "unable to allocate rx queue pages\n");
@@ -567,19 +565,13 @@ static int ibmveth_open(struct net_device *netdev)
 		goto err_out;
 	}
 
-	dev = &adapter->vdev->dev;
-
 	adapter->buffer_list_dma = dma_map_single(dev,
 			adapter->buffer_list_addr, 4096, DMA_BIDIRECTIONAL);
 	adapter->filter_list_dma = dma_map_single(dev,
 			adapter->filter_list_addr, 4096, DMA_BIDIRECTIONAL);
-	adapter->rx_queue.queue_dma = dma_map_single(dev,
-			adapter->rx_queue.queue_addr,
-			adapter->rx_queue.queue_len, DMA_BIDIRECTIONAL);
 
 	if ((dma_mapping_error(dev, adapter->buffer_list_dma)) ||
-	    (dma_mapping_error(dev, adapter->filter_list_dma)) ||
-	    (dma_mapping_error(dev, adapter->rx_queue.queue_dma))) {
+	    (dma_mapping_error(dev, adapter->filter_list_dma))) {
 		netdev_err(netdev, "unable to map filter or buffer list "
 			   "pages\n");
 		rc = -ENOMEM;

[ 113/135] USB: ftdi-sio: add support for more Physik Instrumente devices

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 3771 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Éric Piel <piel@delmic.com>

commit dafc4f7be1a556ca3868d343c00127728b397068 upstream.

Commit b69cc672052540 added support for the E-861.  After acquiring a C-867, I
realised that every Physik Instrumente's device has a different PID. They are
listed in the Windows device driver's .inf file. So here are all PIDs for the
current (and probably future) USB devices from Physik Instrumente.

Compiled, but only actually tested on the E-861 and C-867.

Signed-off-by: Éric Piel <piel@delmic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/ftdi_sio.c     |   17 +++++++++++++++++
 drivers/usb/serial/ftdi_sio_ids.h |   21 ++++++++++++++++++++-
 2 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5620db6..1197d47 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -810,7 +810,24 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
 	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+	{ USB_DEVICE(FTDI_VID, PI_C865_PID) },
+	{ USB_DEVICE(FTDI_VID, PI_C857_PID) },
+	{ USB_DEVICE(PI_VID, PI_C866_PID) },
+	{ USB_DEVICE(PI_VID, PI_C663_PID) },
+	{ USB_DEVICE(PI_VID, PI_C725_PID) },
+	{ USB_DEVICE(PI_VID, PI_E517_PID) },
+	{ USB_DEVICE(PI_VID, PI_C863_PID) },
 	{ USB_DEVICE(PI_VID, PI_E861_PID) },
+	{ USB_DEVICE(PI_VID, PI_C867_PID) },
+	{ USB_DEVICE(PI_VID, PI_E609_PID) },
+	{ USB_DEVICE(PI_VID, PI_E709_PID) },
+	{ USB_DEVICE(PI_VID, PI_100F_PID) },
+	{ USB_DEVICE(PI_VID, PI_1011_PID) },
+	{ USB_DEVICE(PI_VID, PI_1012_PID) },
+	{ USB_DEVICE(PI_VID, PI_1013_PID) },
+	{ USB_DEVICE(PI_VID, PI_1014_PID) },
+	{ USB_DEVICE(PI_VID, PI_1015_PID) },
+	{ USB_DEVICE(PI_VID, PI_1016_PID) },
 	{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 5dd96ca..080d158 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -791,8 +791,27 @@
  * Physik Instrumente
  * http://www.physikinstrumente.com/en/products/
  */
+/* These two devices use the VID of FTDI */
+#define PI_C865_PID	0xe0a0  /* PI C-865 Piezomotor Controller */
+#define PI_C857_PID	0xe0a1  /* PI Encoder Trigger Box */
+
 #define PI_VID              0x1a72  /* Vendor ID */
-#define PI_E861_PID         0x1008  /* E-861 piezo controller USB connection */
+#define PI_C866_PID	0x1000  /* PI C-866 Piezomotor Controller */
+#define PI_C663_PID	0x1001  /* PI C-663 Mercury-Step */
+#define PI_C725_PID	0x1002  /* PI C-725 Piezomotor Controller */
+#define PI_E517_PID	0x1005  /* PI E-517 Digital Piezo Controller Operation Module */
+#define PI_C863_PID	0x1007  /* PI C-863 */
+#define PI_E861_PID	0x1008  /* PI E-861 Piezomotor Controller */
+#define PI_C867_PID	0x1009  /* PI C-867 Piezomotor Controller */
+#define PI_E609_PID	0x100D  /* PI E-609 Digital Piezo Controller */
+#define PI_E709_PID	0x100E  /* PI E-709 Digital Piezo Controller */
+#define PI_100F_PID	0x100F  /* PI Digital Piezo Controller */
+#define PI_1011_PID	0x1011  /* PI Digital Piezo Controller */
+#define PI_1012_PID	0x1012  /* PI Motion Controller */
+#define PI_1013_PID	0x1013  /* PI Motion Controller */
+#define PI_1014_PID	0x1014  /* PI Device */
+#define PI_1015_PID	0x1015  /* PI Device */
+#define PI_1016_PID	0x1016  /* PI Digital Servo Module */
 
 /*
  * Kondo Kagaku Co.Ltd.

[ 114/135] USB: ftdi_sio: PID for NZR SEM 16+ USB

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Horst Schirmeier <horst@schirmeier.com>

commit 26a538b9ea2a3ee10dafc0068f0560dfd7b7ba37 upstream.

This adds the USB PID for the NZR SEM 16+ USB energy monitor device
<http://www.nzr.de>.  It works perfectly with the GPL software on
<http://schou.dk/linux/sparometer/>.

Signed-off-by: Horst Schirmeier <horst@schirmeier.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    3 +++
 2 files changed, 4 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 1197d47..e2fa788 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -704,6 +704,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) },
 	{ USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
 	{ USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
 	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 080d158..9bcaf9c 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -75,6 +75,9 @@
 #define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
 #define FTDI_OPENDCC_GBM_PID	0xBFDC
 
+/* NZR SEM 16+ USB (http://www.nzr.de) */
+#define FTDI_NZR_SEM_USB_PID	0xC1E0	/* NZR SEM-LOG16+ */
+
 /*
  * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
  */

[ 115/135] USB: add device quirk for Joss Optical touchboard

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit 92fc7a8b0f20bdb243c706daf42658e8e0cd2ef0 upstream.

This patch (as1604) adds a CONFIG_INTF_STRINGS quirk for the Joss
infrared touchboard device.  The device doesn't like to be asked for
its interface strings.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: adam ? <adam3337@wp.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/core/quirks.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f15501f4c..e77a8e8 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -71,6 +71,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Microchip Joss Optical infrared touchboard device */
+	{ USB_DEVICE(0x04d8, 0x000c), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* Samsung Android phone modem - ID conflict with SPH-I500 */
 	{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },

[ 116/135] kobject: fix oops with "input0: bad kobj_uevent_env content in show_uevent()"

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2888 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit 60e233a56609fd963c59e99bd75c663d63fa91b6 upstream.

Fengguang Wu <fengguang.wu@intel.com> writes:

> After the __devinit* removal series, I can still get kernel panic in
> show_uevent(). So there are more sources of bug..
>
> Debug patch:
>
> @@ -343,8 +343,11 @@ static ssize_t show_uevent(struct device
>                 goto out;
>
>         /* copy keys to file */
> -       for (i = 0; i < env->envp_idx; i++)
> +       dev_err(dev, "uevent %d env[%d]: %s/.../%s\n", env->buflen, env->envp_idx, top_kobj->name, dev->kobj.name);
> +       for (i = 0; i < env->envp_idx; i++) {
> +               printk(KERN_ERR "uevent %d env[%d]: %s\n", (int)count, i, env->envp[i]);
>                 count += sprintf(&buf[count], "%s\n", env->envp[i]);
> +       }
>
> Oops message, the env[] is again not properly initilized:
>
> [   44.068623] input input0: uevent 61 env[805306368]: input0/.../input0
> [   44.069552] uevent 0 env[0]: (null)

This is a completely different CONFIG_HOTPLUG problem, only
demonstrating another reason why CONFIG_HOTPLUG should go away.  I had a
hard time trying to disable it anyway ;-)

The problem this time is lots of code assuming that a call to
add_uevent_var() will guarantee that env->buflen > 0.  This is not true
if CONFIG_HOTPLUG is unset.  So things like this end up overwriting
env->envp_idx because the array index is -1:

	if (add_uevent_var(env, "MODALIAS="))
		return -ENOMEM;
        len = input_print_modalias(&env->buf[env->buflen - 1],
				   sizeof(env->buf) - env->buflen,
				   dev, 0);

Don't know what the best action is, given that there seem to be a *lot*
of this around the kernel.  This patch "fixes" the problem for me, but I
don't know if it can be considered an appropriate fix.

[ It is the correct fix for now, for 3.7 forcing CONFIG_HOTPLUG to
always be on is the longterm fix, but it's too late for 3.6 and older
kernels to resolve this that way - gregkh ]

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/kobject.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index fc615a9..1e57449 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -224,7 +224,7 @@ static inline int kobject_uevent_env(struct kobject *kobj,
 
 static inline __printf(2, 3)
 int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
-{ return 0; }
+{ return -ENOMEM; }
 
 static inline int kobject_action_type(const char *buf, size_t count,
 				      enum kobject_action *type)

[ 117/135] NFS: return error from decode_getfh in decode open

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

I'm not sure whether my expansion of the fix is correct here.

------------------

From: Weston Andros Adamson <dros@netapp.com>

commit 01913b49cf1dc6409a07dd2a4cc6af2e77f3c410 upstream.

If decode_getfh failed, nfs4_xdr_dec_open would return 0 since the last
decode_* call must have succeeded.

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[bwh: Backported to 3.2: this function makes two more function calls
 (no longer present in mainline) with the same issue, so fix them up
 similarly.]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfs/nfs4xdr.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -6113,12 +6113,15 @@ static int nfs4_xdr_dec_open(struct rpc_
 	status = decode_open(xdr, res);
 	if (status)
 		goto out;
-	if (decode_getfh(xdr, &res->fh) != 0)
+	status = decode_getfh(xdr, &res->fh);
+	if (status)
 		goto out;
-	if (decode_getfattr(xdr, res->f_attr, res->server,
-				!RPC_IS_ASYNC(rqstp->rq_task)) != 0)
+	status = decode_getfattr(xdr, res->f_attr, res->server,
+				 !RPC_IS_ASYNC(rqstp->rq_task));
+	if (status)
 		goto out;
-	if (decode_restorefh(xdr) != 0)
+	status = decode_restorefh(xdr);
+	if (status)
 		goto out;
 	decode_getfattr(xdr, res->dir_attr, res->server,
 			!RPC_IS_ASYNC(rqstp->rq_task));

Re: [ 117/135] NFS: return error from decode_getfh in decode open

[Herton Ronaldo Krzesinski]

On Mon, Sep 17, 2012 at 01:38:22AM +0100, Ben Hutchings wrote:
> 3.2-stable review patch.  If anyone has any objections, please let me know.
> 
> I'm not sure whether my expansion of the fix is correct here.
> 
> ------------------
> 
> From: Weston Andros Adamson <dros@netapp.com>
> 
> commit 01913b49cf1dc6409a07dd2a4cc6af2e77f3c410 upstream.
> 
> If decode_getfh failed, nfs4_xdr_dec_open would return 0 since the last
> decode_* call must have succeeded.
> 
> Signed-off-by: Weston Andros Adamson <dros@netapp.com>
> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
> [bwh: Backported to 3.2: this function makes two more function calls
>  (no longer present in mainline) with the same issue, so fix them up
>  similarly.]
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
>  fs/nfs/nfs4xdr.c |    3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> --- a/fs/nfs/nfs4xdr.c
> +++ b/fs/nfs/nfs4xdr.c
> @@ -6113,12 +6113,15 @@ static int nfs4_xdr_dec_open(struct rpc_
>  	status = decode_open(xdr, res);
>  	if (status)
>  		goto out;
> -	if (decode_getfh(xdr, &res->fh) != 0)
> +	status = decode_getfh(xdr, &res->fh);
> +	if (status)
>  		goto out;
> -	if (decode_getfattr(xdr, res->f_attr, res->server,
> -				!RPC_IS_ASYNC(rqstp->rq_task)) != 0)
> +	status = decode_getfattr(xdr, res->f_attr, res->server,
> +				 !RPC_IS_ASYNC(rqstp->rq_task));

I'm also not sure about the expansion of the fix here, not knowing very
much about nfs. It seems that the code in some cases want to discard the
status from decode_getfattr, for example nfs4_xdr_dec_rename is one case
which does the same. Is it ok to return the status of decode_getfattr on
nfs4_xdr_dec_open here? Or should it remain like it was before?

> +	if (status)
>  		goto out;
> -	if (decode_restorefh(xdr) != 0)
> +	status = decode_restorefh(xdr);
> +	if (status)
>  		goto out;
>  	decode_getfattr(xdr, res->dir_attr, res->server,
>  			!RPC_IS_ASYNC(rqstp->rq_task));

-- 
[]'s
Herton

Re: [ 117/135] NFS: return error from decode_getfh in decode open

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 2496 bytes --]

On Tue, 2012-09-18 at 22:26 -0300, Herton Ronaldo Krzesinski wrote:
> On Mon, Sep 17, 2012 at 01:38:22AM +0100, Ben Hutchings wrote:
> > 3.2-stable review patch.  If anyone has any objections, please let me know.
> > 
> > I'm not sure whether my expansion of the fix is correct here.
> > 
> > ------------------
> > 
> > From: Weston Andros Adamson <dros@netapp.com>
> > 
> > commit 01913b49cf1dc6409a07dd2a4cc6af2e77f3c410 upstream.
> > 
> > If decode_getfh failed, nfs4_xdr_dec_open would return 0 since the last
> > decode_* call must have succeeded.
> > 
> > Signed-off-by: Weston Andros Adamson <dros@netapp.com>
> > Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
> > [bwh: Backported to 3.2: this function makes two more function calls
> >  (no longer present in mainline) with the same issue, so fix them up
> >  similarly.]
> > Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> > ---
> >  fs/nfs/nfs4xdr.c |    3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > --- a/fs/nfs/nfs4xdr.c
> > +++ b/fs/nfs/nfs4xdr.c
> > @@ -6113,12 +6113,15 @@ static int nfs4_xdr_dec_open(struct rpc_
> >  	status = decode_open(xdr, res);
> >  	if (status)
> >  		goto out;
> > -	if (decode_getfh(xdr, &res->fh) != 0)
> > +	status = decode_getfh(xdr, &res->fh);
> > +	if (status)
> >  		goto out;
> > -	if (decode_getfattr(xdr, res->f_attr, res->server,
> > -				!RPC_IS_ASYNC(rqstp->rq_task)) != 0)
> > +	status = decode_getfattr(xdr, res->f_attr, res->server,
> > +				 !RPC_IS_ASYNC(rqstp->rq_task));
> 
> I'm also not sure about the expansion of the fix here, not knowing very
> much about nfs. It seems that the code in some cases want to discard the
> status from decode_getfattr, for example nfs4_xdr_dec_rename is one case
> which does the same. Is it ok to return the status of decode_getfattr on
> nfs4_xdr_dec_open here? Or should it remain like it was before?

It looks like we try to get the file and directory attributes, and those
are nice to have but the open operation is still successful even if we
can't get them.  So my extra 'fixes' here are wrong.  Trond, is this
right?

Ben.

> > +	if (status)
> >  		goto out;
> > -	if (decode_restorefh(xdr) != 0)
> > +	status = decode_restorefh(xdr);
> > +	if (status)
> >  		goto out;
> >  	decode_getfattr(xdr, res->dir_attr, res->server,
> >  			!RPC_IS_ASYNC(rqstp->rq_task));
> 

-- 
Ben Hutchings
The world is coming to an end.	Please log off.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 117/135] NFS: return error from decode_getfh in decode open

[Myklebust, Trond]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 3329 bytes --]

On Wed, 2012-09-19 at 04:39 +0100, Ben Hutchings wrote:
> On Tue, 2012-09-18 at 22:26 -0300, Herton Ronaldo Krzesinski wrote:
> > On Mon, Sep 17, 2012 at 01:38:22AM +0100, Ben Hutchings wrote:
> > > 3.2-stable review patch.  If anyone has any objections, please let me know.
> > > 
> > > I'm not sure whether my expansion of the fix is correct here.
> > > 
> > > ------------------
> > > 
> > > From: Weston Andros Adamson <dros@netapp.com>
> > > 
> > > commit 01913b49cf1dc6409a07dd2a4cc6af2e77f3c410 upstream.
> > > 
> > > If decode_getfh failed, nfs4_xdr_dec_open would return 0 since the last
> > > decode_* call must have succeeded.
> > > 
> > > Signed-off-by: Weston Andros Adamson <dros@netapp.com>
> > > Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
> > > [bwh: Backported to 3.2: this function makes two more function calls
> > >  (no longer present in mainline) with the same issue, so fix them up
> > >  similarly.]
> > > Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> > > ---
> > >  fs/nfs/nfs4xdr.c |    3 ++-
> > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > > 
> > > --- a/fs/nfs/nfs4xdr.c
> > > +++ b/fs/nfs/nfs4xdr.c
> > > @@ -6113,12 +6113,15 @@ static int nfs4_xdr_dec_open(struct rpc_
> > >  	status = decode_open(xdr, res);
> > >  	if (status)
> > >  		goto out;
> > > -	if (decode_getfh(xdr, &res->fh) != 0)
> > > +	status = decode_getfh(xdr, &res->fh);
> > > +	if (status)
> > >  		goto out;
> > > -	if (decode_getfattr(xdr, res->f_attr, res->server,
> > > -				!RPC_IS_ASYNC(rqstp->rq_task)) != 0)
> > > +	status = decode_getfattr(xdr, res->f_attr, res->server,
> > > +				 !RPC_IS_ASYNC(rqstp->rq_task));
> > 
> > I'm also not sure about the expansion of the fix here, not knowing very
> > much about nfs. It seems that the code in some cases want to discard the
> > status from decode_getfattr, for example nfs4_xdr_dec_rename is one case
> > which does the same. Is it ok to return the status of decode_getfattr on
> > nfs4_xdr_dec_open here? Or should it remain like it was before?
> 
> It looks like we try to get the file and directory attributes, and those
> are nice to have but the open operation is still successful even if we
> can't get them.  So my extra 'fixes' here are wrong.  Trond, is this
> right?

Hi Ben,

We do not want to fail the RPC call in the case where the attribute
decode failed; we already have ways to recover from that situation in
the higher layers of the open code (we send a separate getattr RPC
call). If, on the other hand, the filehandle decode fails, then we are
screwed since we can't know exactly which file was just opened and this
would be the reason for Dros's patch.

So please do leave the decode_getfattr() line as it was, and apply the
change to the decode_getfh() line only.

Cheers
  Trond


> Ben.
> 
> > > +	if (status)
> > >  		goto out;
> > > -	if (decode_restorefh(xdr) != 0)
> > > +	status = decode_restorefh(xdr);
> > > +	if (status)
> > >  		goto out;
> > >  	decode_getfattr(xdr, res->dir_attr, res->server,
> > >  			!RPC_IS_ASYNC(rqstp->rq_task));
> > 
> 

-- 
Trond Myklebust
Linux NFS client maintainer

NetApp
Trond.Myklebust@netapp.com
www.netapp.com
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

Re: [ 117/135] NFS: return error from decode_getfh in decode open

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 1749 bytes --]

On Wed, 2012-09-19 at 15:53 +0000, Myklebust, Trond wrote:
> On Wed, 2012-09-19 at 04:39 +0100, Ben Hutchings wrote:
> > On Tue, 2012-09-18 at 22:26 -0300, Herton Ronaldo Krzesinski wrote:
> > > On Mon, Sep 17, 2012 at 01:38:22AM +0100, Ben Hutchings wrote:
> > > > 3.2-stable review patch.  If anyone has any objections, please let me know.
> > > > 
> > > > I'm not sure whether my expansion of the fix is correct here.
[...]
> > > I'm also not sure about the expansion of the fix here, not knowing very
> > > much about nfs. It seems that the code in some cases want to discard the
> > > status from decode_getfattr, for example nfs4_xdr_dec_rename is one case
> > > which does the same. Is it ok to return the status of decode_getfattr on
> > > nfs4_xdr_dec_open here? Or should it remain like it was before?
> > 
> > It looks like we try to get the file and directory attributes, and those
> > are nice to have but the open operation is still successful even if we
> > can't get them.  So my extra 'fixes' here are wrong.  Trond, is this
> > right?
> 
> Hi Ben,
> 
> We do not want to fail the RPC call in the case where the attribute
> decode failed; we already have ways to recover from that situation in
> the higher layers of the open code (we send a separate getattr RPC
> call). If, on the other hand, the filehandle decode fails, then we are
> screwed since we can't know exactly which file was just opened and this
> would be the reason for Dros's patch.
> 
> So please do leave the decode_getfattr() line as it was, and apply the
> change to the decode_getfh() line only.

Thanks for the confirmation; this is what I've done.

Ben.

-- 
Ben Hutchings
The world is coming to an end.	Please log off.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

[ 118/135] SUNRPC: Fix a UDP transport regression

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit f39c1bfb5a03e2d255451bff05be0d7255298fa4 upstream.

Commit 43cedbf0e8dfb9c5610eb7985d5f21263e313802 (SUNRPC: Ensure that
we grab the XPRT_LOCK before calling xprt_alloc_slot) is causing
hangs in the case of NFS over UDP mounts.

Since neither the UDP or the RDMA transport mechanism use dynamic slot
allocation, we can skip grabbing the socket lock for those transports.
Add a new rpc_xprt_op to allow switching between the TCP and UDP/RDMA
case.

Note that the NFSv4.1 back channel assigns the slot directly
through rpc_run_bc_task, so we can ignore that case.

Reported-by: Dick Streefland <dick.streefland@altium.nl>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/sunrpc/xprt.h     |    3 +++
 net/sunrpc/xprt.c               |   34 ++++++++++++++++++++--------------
 net/sunrpc/xprtrdma/transport.c |    1 +
 net/sunrpc/xprtsock.c           |    3 +++
 4 files changed, 27 insertions(+), 14 deletions(-)

diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index cff40aa..bf8c49f 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -114,6 +114,7 @@ struct rpc_xprt_ops {
 	void		(*set_buffer_size)(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize);
 	int		(*reserve_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
 	void		(*release_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
+	void		(*alloc_slot)(struct rpc_xprt *xprt, struct rpc_task *task);
 	void		(*rpcbind)(struct rpc_task *task);
 	void		(*set_port)(struct rpc_xprt *xprt, unsigned short port);
 	void		(*connect)(struct rpc_task *task);
@@ -281,6 +282,8 @@ void			xprt_connect(struct rpc_task *task);
 void			xprt_reserve(struct rpc_task *task);
 int			xprt_reserve_xprt(struct rpc_xprt *xprt, struct rpc_task *task);
 int			xprt_reserve_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task);
+void			xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task);
+void			xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task);
 int			xprt_prepare_transmit(struct rpc_task *task);
 void			xprt_transmit(struct rpc_task *task);
 void			xprt_end_transmit(struct rpc_task *task);
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index a5a402a..5d7f61d 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -969,11 +969,11 @@ static bool xprt_dynamic_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *req)
 	return false;
 }
 
-static void xprt_alloc_slot(struct rpc_task *task)
+void xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task)
 {
-	struct rpc_xprt	*xprt = task->tk_xprt;
 	struct rpc_rqst *req;
 
+	spin_lock(&xprt->reserve_lock);
 	if (!list_empty(&xprt->free)) {
 		req = list_entry(xprt->free.next, struct rpc_rqst, rq_list);
 		list_del(&req->rq_list);
@@ -994,12 +994,29 @@ static void xprt_alloc_slot(struct rpc_task *task)
 	default:
 		task->tk_status = -EAGAIN;
 	}
+	spin_unlock(&xprt->reserve_lock);
 	return;
 out_init_req:
 	task->tk_status = 0;
 	task->tk_rqstp = req;
 	xprt_request_init(task, xprt);
+	spin_unlock(&xprt->reserve_lock);
+}
+EXPORT_SYMBOL_GPL(xprt_alloc_slot);
+
+void xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task)
+{
+	/* Note: grabbing the xprt_lock_write() ensures that we throttle
+	 * new slot allocation if the transport is congested (i.e. when
+	 * reconnecting a stream transport or when out of socket write
+	 * buffer space).
+	 */
+	if (xprt_lock_write(xprt, task)) {
+		xprt_alloc_slot(xprt, task);
+		xprt_release_write(xprt, task);
+	}
 }
+EXPORT_SYMBOL_GPL(xprt_lock_and_alloc_slot);
 
 static void xprt_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *req)
 {
@@ -1083,20 +1100,9 @@ void xprt_reserve(struct rpc_task *task)
 	if (task->tk_rqstp != NULL)
 		return;
 
-	/* Note: grabbing the xprt_lock_write() here is not strictly needed,
-	 * but ensures that we throttle new slot allocation if the transport
-	 * is congested (e.g. if reconnecting or if we're out of socket
-	 * write buffer space).
-	 */
 	task->tk_timeout = 0;
 	task->tk_status = -EAGAIN;
-	if (!xprt_lock_write(xprt, task))
-		return;
-
-	spin_lock(&xprt->reserve_lock);
-	xprt_alloc_slot(task);
-	spin_unlock(&xprt->reserve_lock);
-	xprt_release_write(xprt, task);
+	xprt->ops->alloc_slot(xprt, task);
 }
 
 static inline __be32 xprt_alloc_xid(struct rpc_xprt *xprt)
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 06cdbff..5d9202d 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -713,6 +713,7 @@ static void xprt_rdma_print_stats(struct rpc_xprt *xprt, struct seq_file *seq)
 static struct rpc_xprt_ops xprt_rdma_procs = {
 	.reserve_xprt		= xprt_rdma_reserve_xprt,
 	.release_xprt		= xprt_release_xprt_cong, /* sunrpc/xprt.c */
+	.alloc_slot		= xprt_alloc_slot,
 	.release_request	= xprt_release_rqst_cong,       /* ditto */
 	.set_retrans_timeout	= xprt_set_retrans_timeout_def, /* ditto */
 	.rpcbind		= rpcb_getport_async,	/* sunrpc/rpcb_clnt.c */
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 4005672..a35b8e5 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -2473,6 +2473,7 @@ static void bc_destroy(struct rpc_xprt *xprt)
 static struct rpc_xprt_ops xs_local_ops = {
 	.reserve_xprt		= xprt_reserve_xprt,
 	.release_xprt		= xs_tcp_release_xprt,
+	.alloc_slot		= xprt_alloc_slot,
 	.rpcbind		= xs_local_rpcbind,
 	.set_port		= xs_local_set_port,
 	.connect		= xs_connect,
@@ -2489,6 +2490,7 @@ static struct rpc_xprt_ops xs_udp_ops = {
 	.set_buffer_size	= xs_udp_set_buffer_size,
 	.reserve_xprt		= xprt_reserve_xprt_cong,
 	.release_xprt		= xprt_release_xprt_cong,
+	.alloc_slot		= xprt_alloc_slot,
 	.rpcbind		= rpcb_getport_async,
 	.set_port		= xs_set_port,
 	.connect		= xs_connect,
@@ -2506,6 +2508,7 @@ static struct rpc_xprt_ops xs_udp_ops = {
 static struct rpc_xprt_ops xs_tcp_ops = {
 	.reserve_xprt		= xprt_reserve_xprt,
 	.release_xprt		= xs_tcp_release_xprt,
+	.alloc_slot		= xprt_lock_and_alloc_slot,
 	.rpcbind		= rpcb_getport_async,
 	.set_port		= xs_set_port,
 	.connect		= xs_connect,

[ 119/135] ARM: 7513/1: Make sure dtc is built before running it

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Brown <davidb@codeaurora.org>

commit 70b0476a2394de4f4e32e0b67288d80ff71ca963 upstream.

'make dtbs' in a clean tree will try running the dtc before actually
building it.  Make these rules depend upon the scripts to build it.

Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/Makefile |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 30eae87..a051dfb 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-%.dtb:
+%.dtb: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-dtbs:
+dtbs: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
 # We use MRPROPER_FILES and CLEAN_FILES now

[ 120/135] ARM: 7526/1: traps: send SIGILL if get_user fails on undef handling path

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit 2b2040af0b64cd93e5d4df2494c4486cf604090d upstream.

get_user may fail to load from the provided __user address due to an
unhandled fault generated by the access.

In the case of the undefined instruction trap, this results in failure
to load the faulting instruction, in which case we should send SIGILL to
the task rather than continue with potentially uninitialised data.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/kernel/traps.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f794521..b0179b8 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -420,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 #endif
 			instr = *(u32 *) pc;
 	} else if (thumb_mode(regs)) {
-		get_user(instr, (u16 __user *)pc);
+		if (get_user(instr, (u16 __user *)pc))
+			goto die_sig;
 		if (is_wide_instruction(instr)) {
 			unsigned int instr2;
-			get_user(instr2, (u16 __user *)pc+1);
+			if (get_user(instr2, (u16 __user *)pc+1))
+				goto die_sig;
 			instr <<= 16;
 			instr |= instr2;
 		}
-	} else {
-		get_user(instr, (u32 __user *)pc);
+	} else if (get_user(instr, (u32 __user *)pc)) {
+		goto die_sig;
 	}
 
 	if (call_undef_hook(regs, instr) == 0)
 		return;
 
+die_sig:
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",

[ 121/135] ALSA: hda - Fix Oops at codec reset/reconfig

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 07dc59f0988cb54fd87bd373b3b27eb2401dd811 upstream.

snd_hda_codec_reset() calls restore_pincfgs() where the codec is
powered up again, which eventually tries to resume and initialize via
the callbacks of the codec.  However, it's the place just after codec
free callback, thus no codec callbacks should be called after that.
On a codec like CS4206, it results in Oops due to the access in init
callback.

This patch fixes the issue by clearing the codec callbacks properly
after freeing codec.

Reported-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/pci/hda/hda_codec.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -2312,6 +2312,7 @@ int snd_hda_codec_reset(struct hda_codec
 	}
 	if (codec->patch_ops.free)
 		codec->patch_ops.free(codec);
+	memset(&codec->patch_ops, 0, sizeof(codec->patch_ops));
 	codec->proc_widget_hook = NULL;
 	codec->spec = NULL;
 	free_hda_cache(&codec->amp_cache);
@@ -2324,7 +2325,6 @@ int snd_hda_codec_reset(struct hda_codec
 	codec->num_pcms = 0;
 	codec->pcm_info = NULL;
 	codec->preset = NULL;
-	memset(&codec->patch_ops, 0, sizeof(codec->patch_ops));
 	codec->slave_dig_outs = NULL;
 	codec->spdif_status_reset = 0;
 	module_put(codec->owner);

[ 122/135] USB: ftdi_sio: do not claim CDC ACM function

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2963 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit f08dea734844aa42ec57c229b0b73b3d7d21f810 upstream.

The Microchip vid:pid 04d8:000a is used for their CDC ACM
demo firmware application.  This is a device with a single
function conforming to the CDC ACM specification and with
the intention of demonstrating CDC ACM class firmware and
driver interaction.  The demo is used on a number of
development boards, and may also be used unmodified by
vendors using Microchip hardware.

Some vendors have re-used this vid:pid for other types of
firmware, emulating FTDI chips. Attempting to continue to
support such devices without breaking class based
applications that by matching on interface
class/subclass/proto being ff/ff/00.  I have no information
about the actual device or interface descriptors, but this
will at least make the proper CDC ACM devices work again.
Anyone having details of the offending device's descriptors
should update this entry with the details.

Reported-by: Florian Wöhrl <fw@woehrl.biz>
Reported-by: Xiaofan Chen <xiaofanc@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/ftdi_sio.c     |    4 +++-
 drivers/usb/serial/ftdi_sio_ids.h |    5 ++++-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index e2fa788..f906b3a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -805,7 +805,9 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
+					USB_CLASS_VENDOR_SPEC,
+					USB_SUBCLASS_VENDOR_SPEC, 0x00) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 9bcaf9c..41fe582 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -542,7 +542,10 @@
 /*
  * Microchip Technology, Inc.
  *
- * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by:
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are
+ * used by single function CDC ACM class based firmware demo
+ * applications.  The VID/PID has also been used in firmware
+ * emulating FTDI serial chips by:
  * Hornby Elite - Digital Command Control Console
  * http://www.hornby.com/hornby-dcc/controllers/
  */

[ 123/135] staging: r8712u: fix bug in r8712_recv_indicatepkt()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit abf02cfc179bb4bd30d05f582d61b3b8f429b813 upstream.

64bit arches have a buggy r8712u driver, let's fix it.

skb->tail must be set properly or network stack behavior is undefined.

Addresses https://bugzilla.redhat.com/show_bug.cgi?id=847525
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=45071

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dave Jones <davej@redhat.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/staging/rtl8712/recv_linux.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/staging/rtl8712/recv_linux.c b/drivers/staging/rtl8712/recv_linux.c
index 0e26d5f..495ee12 100644
--- a/drivers/staging/rtl8712/recv_linux.c
+++ b/drivers/staging/rtl8712/recv_linux.c
@@ -117,13 +117,8 @@ void r8712_recv_indicatepkt(struct _adapter *padapter,
 	if (skb == NULL)
 		goto _recv_indicatepkt_drop;
 	skb->data = precv_frame->u.hdr.rx_data;
-#ifdef NET_SKBUFF_DATA_USES_OFFSET
-	skb->tail = (sk_buff_data_t)(precv_frame->u.hdr.rx_tail -
-		     precv_frame->u.hdr.rx_head);
-#else
-	skb->tail = (sk_buff_data_t)precv_frame->u.hdr.rx_tail;
-#endif
 	skb->len = precv_frame->u.hdr.len;
+	skb_set_tail_pointer(skb, skb->len);
 	if ((pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 	else

[ 124/135] EHCI: Update qTD next pointer in QH overlay region during unlink

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavankumar Kondeti <pkondeti@codeaurora.org>

commit 3d037774b42ed677f699b1dce7d548d55f4e4c2b upstream.

There is a possibility of QH overlay region having reference to a stale
qTD pointer during unlink.

Consider an endpoint having two pending qTD before unlink process begins.
The endpoint's QH queue looks like this.

qTD1 --> qTD2 --> Dummy

To unlink qTD2, QH is removed from asynchronous list and Asynchronous
Advance Doorbell is programmed.  The qTD1's next qTD pointer is set to
qTD2'2 next qTD pointer and qTD2 is retired upon controller's doorbell
interrupt.  If QH's current qTD pointer points to qTD1, transfer overlay
region still have reference to qTD2. But qtD2 is just unlinked and freed.
This may cause EHCI system error.  Fix this by updating qTD next pointer
in QH overlay region with the qTD next pointer of the current qTD.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/ehci-q.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 9bc39ca..4b66374 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -128,9 +128,17 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	else {
 		qtd = list_entry (qh->qtd_list.next,
 				struct ehci_qtd, qtd_list);
-		/* first qtd may already be partially processed */
-		if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current)
+		/*
+		 * first qtd may already be partially processed.
+		 * If we come here during unlink, the QH overlay region
+		 * might have reference to the just unlinked qtd. The
+		 * qtd is updated in qh_completions(). Update the QH
+		 * overlay here.
+		 */
+		if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+			qh->hw->hw_qtd_next = qtd->hw_next;
 			qtd = NULL;
+		}
 	}
 
 	if (qtd)

[ 125/135] hwmon: (twl4030-madc-hwmon) Initialize uninitialized structure elements

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit 73d7c119255615a26070f9d6cdb722a166a29015 upstream.

twl4030_madc_conversion uses do_avg and type structure elements of
twl4030_madc_request. Initialize structure to avoid random operation.

Fix for: Coverity CID 200794 Uninitialized scalar variable.

Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/hwmon/twl4030-madc-hwmon.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c
index 0018c7d..1a174f0 100644
--- a/drivers/hwmon/twl4030-madc-hwmon.c
+++ b/drivers/hwmon/twl4030-madc-hwmon.c
@@ -44,12 +44,13 @@ static ssize_t madc_read(struct device *dev,
 			 struct device_attribute *devattr, char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct twl4030_madc_request req;
+	struct twl4030_madc_request req = {
+		.channels = 1 << attr->index,
+		.method = TWL4030_MADC_SW2,
+		.type = TWL4030_MADC_WAIT,
+	};
 	long val;
 
-	req.channels = (1 << attr->index);
-	req.method = TWL4030_MADC_SW2;
-	req.func_cb = NULL;
 	val = twl4030_madc_conversion(&req);
 	if (val < 0)
 		return val;

[ 126/135] ALSA: ice1724: Use linear scale for AK4396 volume control.

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matteo Frigo <athena@fftw.org>

commit 3737e2be505d872bf2b3c1cd4151b2d2b413d7b5 upstream.

The AK4396 DAC has a linear-scale attentuator, but
sound/pci/ice1712/prodigy_hifi.c used a log scale instead, which is
not quite right.  This patch restores the correct scale, borrowing
from the ak4396 code in sound/pci/oxygen/oxygen.c.

Signed-off-by: Matteo Frigo <athena@fftw.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/pci/ice1712/prodigy_hifi.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/pci/ice1712/prodigy_hifi.c b/sound/pci/ice1712/prodigy_hifi.c
index 764cc93..075d5aa 100644
--- a/sound/pci/ice1712/prodigy_hifi.c
+++ b/sound/pci/ice1712/prodigy_hifi.c
@@ -297,6 +297,7 @@ static int ak4396_dac_vol_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem
 }
 
 static const DECLARE_TLV_DB_SCALE(db_scale_wm_dac, -12700, 100, 1);
+static const DECLARE_TLV_DB_LINEAR(ak4396_db_scale, TLV_DB_GAIN_MUTE, 0);
 
 static struct snd_kcontrol_new prodigy_hd2_controls[] __devinitdata = {
     {
@@ -307,7 +308,7 @@ static struct snd_kcontrol_new prodigy_hd2_controls[] __devinitdata = {
 	.info = ak4396_dac_vol_info,
 	.get = ak4396_dac_vol_get,
 	.put = ak4396_dac_vol_put,
-	.tlv = { .p = db_scale_wm_dac },
+	.tlv = { .p = ak4396_db_scale },
     },
 };
 

[ 127/135] vmwgfx: add dumb ioctl support

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

Is this useful for 3.2 or does it depend on any other later changes?
(All I know is that it builds cleanly.)

------------------

From: Dave Airlie <airlied@redhat.com>

commit 5e1782d224c79b26ab7d5c31e3f87657000714fb upstream.

Testing and works with the -modesetting driver,

Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c      |    5 ++
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.h      |   10 ++++
 drivers/gpu/drm/vmwgfx/vmwgfx_resource.c |   73 ++++++++++++++++++++++++++++++
 3 files changed, 88 insertions(+)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -1089,6 +1089,11 @@ static struct drm_driver driver = {
 	.master_drop = vmw_master_drop,
 	.open = vmw_driver_open,
 	.postclose = vmw_postclose,
+
+	.dumb_create = vmw_dumb_create,
+	.dumb_map_offset = vmw_dumb_map_offset,
+	.dumb_destroy = vmw_dumb_destroy,
+
 	.fops = {
 		 .owner = THIS_MODULE,
 		 .open = drm_open,
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -641,6 +641,16 @@ int vmw_kms_readback(struct vmw_private
 int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
 				struct drm_file *file_priv);
 
+int vmw_dumb_create(struct drm_file *file_priv,
+		    struct drm_device *dev,
+		    struct drm_mode_create_dumb *args);
+
+int vmw_dumb_map_offset(struct drm_file *file_priv,
+			struct drm_device *dev, uint32_t handle,
+			uint64_t *offset);
+int vmw_dumb_destroy(struct drm_file *file_priv,
+		     struct drm_device *dev,
+		     uint32_t handle);
 /**
  * Overlay control - vmwgfx_overlay.c
  */
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -1950,3 +1950,76 @@ err_ref:
 	vmw_resource_unreference(&res);
 	return ret;
 }
+
+
+int vmw_dumb_create(struct drm_file *file_priv,
+		    struct drm_device *dev,
+		    struct drm_mode_create_dumb *args)
+{
+	struct vmw_private *dev_priv = vmw_priv(dev);
+	struct vmw_master *vmaster = vmw_master(file_priv->master);
+	struct vmw_user_dma_buffer *vmw_user_bo;
+	struct ttm_buffer_object *tmp;
+	int ret;
+
+	args->pitch = args->width * ((args->bpp + 7) / 8);
+	args->size = args->pitch * args->height;
+
+	vmw_user_bo = kzalloc(sizeof(*vmw_user_bo), GFP_KERNEL);
+	if (vmw_user_bo == NULL)
+		return -ENOMEM;
+
+	ret = ttm_read_lock(&vmaster->lock, true);
+	if (ret != 0) {
+		kfree(vmw_user_bo);
+		return ret;
+	}
+
+	ret = vmw_dmabuf_init(dev_priv, &vmw_user_bo->dma, args->size,
+			      &vmw_vram_sys_placement, true,
+			      &vmw_user_dmabuf_destroy);
+	if (ret != 0)
+		goto out_no_dmabuf;
+
+	tmp = ttm_bo_reference(&vmw_user_bo->dma.base);
+	ret = ttm_base_object_init(vmw_fpriv(file_priv)->tfile,
+				   &vmw_user_bo->base,
+				   false,
+				   ttm_buffer_type,
+				   &vmw_user_dmabuf_release, NULL);
+	if (unlikely(ret != 0))
+		goto out_no_base_object;
+
+	args->handle = vmw_user_bo->base.hash.key;
+
+out_no_base_object:
+	ttm_bo_unref(&tmp);
+out_no_dmabuf:
+	ttm_read_unlock(&vmaster->lock);
+	return ret;
+}
+
+int vmw_dumb_map_offset(struct drm_file *file_priv,
+			struct drm_device *dev, uint32_t handle,
+			uint64_t *offset)
+{
+	struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
+	struct vmw_dma_buffer *out_buf;
+	int ret;
+
+	ret = vmw_user_dmabuf_lookup(tfile, handle, &out_buf);
+	if (ret != 0)
+		return -EINVAL;
+
+	*offset = out_buf->base.addr_space_offset;
+	vmw_dmabuf_unreference(&out_buf);
+	return 0;
+}
+
+int vmw_dumb_destroy(struct drm_file *file_priv,
+		     struct drm_device *dev,
+		     uint32_t handle)
+{
+	return ttm_ref_object_base_unref(vmw_fpriv(file_priv)->tfile,
+					 handle, TTM_REF_USAGE);
+}

[ 128/135] ahci: Add alternate identifier for the 88SE9172

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Cox <alan@linux.intel.com>

commit 17c60c6b763cb5b83b0185e7d38d01d18e55a05a upstream.

This can also appear as 0x9192. Reported in bugzilla and confirmed with the
board documentation for these boards.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42970
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/ata/ahci.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c3f52eb..51548dd 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -396,6 +396,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9125 */
 	{ PCI_DEVICE(0x1b4b, 0x917a),
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 */
+	{ PCI_DEVICE(0x1b4b, 0x9192),
+	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 on some Gigabyte */
 	{ PCI_DEVICE(0x1b4b, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
 

[ 129/135] drm/radeon: fix up pll selection on DCE5/6

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1256 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 26fe45a0a76f165425f332a5aaa298f149f9db22 upstream.

Selecting ATOM_PPLL_INVALID should be equivalent as the
DCPLL or PPLL0 are already programmed for the DISPCLK, but
the preferred method is to always specify the PLL selected.
SetPixelClock will check the parameters and skip the
programming if the PLL is already set up.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[bwh: Backported to 3.2: drop the DCE6 case]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/atombios_crtc.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1468,7 +1468,9 @@ static int radeon_atom_pick_pll(struct d
 				 * crtc virtual pixel clock.
 				 */
 				if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
-					if (ASIC_IS_DCE5(rdev) || rdev->clock.dp_extclk)
+					if (ASIC_IS_DCE5(rdev))
+						return ATOM_DCPLL;
+					else if (rdev->clock.dp_extclk)
 						return ATOM_PPLL_INVALID;
 				}
 			}

[ 130/135] drm/radeon: fix ordering in pll picking on dce4+

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit ecd67955fd4c8e66e4df312098989d5fa7da624c upstream.

No functional change, but re-order the cases so they
evaluate properly due to the way the DCE macros work.

Noticed by kallisti5 on IRC.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[bwh: Backported to 3.2: drop the DCE6 case]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/atombios_crtc.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1468,10 +1468,10 @@ static int radeon_atom_pick_pll(struct d
 				 * crtc virtual pixel clock.
 				 */
 				if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
-					if (ASIC_IS_DCE5(rdev))
-						return ATOM_DCPLL;
-					else if (rdev->clock.dp_extclk)
+					if (rdev->clock.dp_extclk)
 						return ATOM_PPLL_INVALID;
+					else if (ASIC_IS_DCE5(rdev))
+						return ATOM_DCPLL;
 				}
 			}
 		}

[ 131/135] drm/radeon: rework pll selection (v3)

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 985f61f7ee647ad570c05eab0b74915da2ac8e19 upstream.

For DP we can use the same PPLL for all active DP
encoders.  Take advantage of that to prevent cases
where we may end up sharing a PPLL between DP and
non-DP which won't work.  Also clean up the code
a bit.

v2: - fix missing pll_id assignment in crtc init
v3: - fix DP PPLL check
    - document functions
    - break in main encoder search loop after matching.
      no need to keep checking additional encoders.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=54471

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[bwh: Backported to 3.2: drop the DCE6 case]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/atombios_crtc.c |  163 +++++++++++++++++++++++++-------
 1 file changed, 129 insertions(+), 34 deletions(-)

--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1446,14 +1446,98 @@ static void radeon_legacy_atom_fixup(str
 	}
 }
 
+/**
+ * radeon_get_pll_use_mask - look up a mask of which pplls are in use
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the mask of which PPLLs (Pixel PLLs) are in use.
+ */
+static u32 radeon_get_pll_use_mask(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_crtc *test_crtc;
+	struct radeon_crtc *radeon_test_crtc;
+	u32 pll_in_use = 0;
+
+	list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
+		if (crtc == test_crtc)
+			continue;
+
+		radeon_test_crtc = to_radeon_crtc(test_crtc);
+		if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
+			pll_in_use |= (1 << radeon_test_crtc->pll_id);
+	}
+	return pll_in_use;
+}
+
+/**
+ * radeon_get_shared_dp_ppll - return the PPLL used by another crtc for DP
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the PPLL (Pixel PLL) used by another crtc/encoder which is
+ * also in DP mode.  For DP, a single PPLL can be used for all DP
+ * crtcs/encoders.
+ */
+static int radeon_get_shared_dp_ppll(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_encoder *test_encoder;
+	struct radeon_crtc *radeon_test_crtc;
+
+	list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
+		if (test_encoder->crtc && (test_encoder->crtc != crtc)) {
+			if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
+				/* for DP use the same PLL for all */
+				radeon_test_crtc = to_radeon_crtc(test_encoder->crtc);
+				if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
+					return radeon_test_crtc->pll_id;
+			}
+		}
+	}
+	return ATOM_PPLL_INVALID;
+}
+
+/**
+ * radeon_atom_pick_pll - Allocate a PPLL for use by the crtc.
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the PPLL (Pixel PLL) to be used by the crtc.  For DP monitors
+ * a single PPLL can be used for all DP crtcs/encoders.  For non-DP
+ * monitors a dedicated PPLL must be used.  If a particular board has
+ * an external DP PLL, return ATOM_PPLL_INVALID to skip PLL programming
+ * as there is no need to program the PLL itself.  If we are not able to
+ * allocate a PLL, return ATOM_PPLL_INVALID to skip PLL programming to
+ * avoid messing up an existing monitor.
+ *
+ * Asic specific PLL information
+ *
+ * DCE 6.1
+ * - PPLL2 is only available to UNIPHYA (both DP and non-DP)
+ * - PPLL0, PPLL1 are available for UNIPHYB/C/D/E/F (both DP and non-DP)
+ *
+ * DCE 6.0
+ * - PPLL0 is available to all UNIPHY (DP only)
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ * DCE 5.0
+ * - DCPLL is available to all UNIPHY (DP only)
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ * DCE 3.0/4.0/4.1
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ */
 static int radeon_atom_pick_pll(struct drm_crtc *crtc)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct drm_encoder *test_encoder;
-	struct drm_crtc *test_crtc;
-	uint32_t pll_in_use = 0;
+	u32 pll_in_use;
+	int pll;
 
 	if (ASIC_IS_DCE4(rdev)) {
 		list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
@@ -1461,7 +1545,7 @@ static int radeon_atom_pick_pll(struct d
 				/* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
 				 * depending on the asic:
 				 * DCE4: PPLL or ext clock
-				 * DCE5: DCPLL or ext clock
+				 * DCE5: PPLL, DCPLL, or ext clock
 				 *
 				 * Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
 				 * PPLL/DCPLL programming and only program the DP DTO for the
@@ -1469,29 +1553,31 @@ static int radeon_atom_pick_pll(struct d
 				 */
 				if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
 					if (rdev->clock.dp_extclk)
+						/* skip PPLL programming if using ext clock */
 						return ATOM_PPLL_INVALID;
 					else if (ASIC_IS_DCE5(rdev))
+						/* use DCPLL for all DP */
 						return ATOM_DCPLL;
+					else {
+						/* use the same PPLL for all DP monitors */
+						pll = radeon_get_shared_dp_ppll(crtc);
+						if (pll != ATOM_PPLL_INVALID)
+							return pll;
+					}
 				}
+				break;
 			}
 		}
-
-		/* otherwise, pick one of the plls */
-		list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
-			struct radeon_crtc *radeon_test_crtc;
-
-			if (crtc == test_crtc)
-				continue;
-
-			radeon_test_crtc = to_radeon_crtc(test_crtc);
-			if ((radeon_test_crtc->pll_id >= ATOM_PPLL1) &&
-			    (radeon_test_crtc->pll_id <= ATOM_PPLL2))
-				pll_in_use |= (1 << radeon_test_crtc->pll_id);
-		}
-		if (!(pll_in_use & 1))
+		/* all other cases */
+		pll_in_use = radeon_get_pll_use_mask(crtc);
+		if (!(pll_in_use & (1 << ATOM_PPLL2)))
+			return ATOM_PPLL2;
+		if (!(pll_in_use & (1 << ATOM_PPLL1)))
 			return ATOM_PPLL1;
-		return ATOM_PPLL2;
+		DRM_ERROR("unable to allocate a PPLL\n");
+		return ATOM_PPLL_INVALID;
 	} else
+		/* use PPLL1 or PPLL2 */
 		return radeon_crtc->crtc_id;
 
 }
@@ -1610,7 +1696,7 @@ static void atombios_crtc_disable(struct
 		break;
 	}
 done:
-	radeon_crtc->pll_id = -1;
+	radeon_crtc->pll_id = ATOM_PPLL_INVALID;
 }
 
 static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
@@ -1659,6 +1745,6 @@ void radeon_atombios_init_crtc(struct dr
 		else
 			radeon_crtc->crtc_offset = 0;
 	}
-	radeon_crtc->pll_id = -1;
+	radeon_crtc->pll_id = ATOM_PPLL_INVALID;
 	drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
 }

[ 132/135] drm/nouveau: fix booting with plymouth + dumb support

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit 610bd7da160f76f1644ecb4cd7f39511b49a22cc upstream.

We noticed a plymouth bug on Fedora 18, and I then
noticed this stupid thinko, fixing it fixed the problem
with plymouth.

Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/nouveau/nouveau_display.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index 69688ef..7e16dc5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -598,7 +598,7 @@ nouveau_display_dumb_create(struct drm_file *file_priv, struct drm_device *dev,
 	args->size = args->pitch * args->height;
 	args->size = roundup(args->size, PAGE_SIZE);
 
-	ret = nouveau_gem_new(dev, args->size, 0, TTM_PL_FLAG_VRAM, 0, 0, &bo);
+	ret = nouveau_gem_new(dev, args->size, 0, NOUVEAU_GEM_DOMAIN_VRAM, 0, 0, &bo);
 	if (ret)
 		return ret;
 

[ 133/135] eCryptfs: Copy up attributes of the lower target inode after rename

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tyler Hicks <tyhicks@canonical.com>

commit 8335eafc2859e1a26282bef7c3d19f3d68868b8a upstream.

After calling into the lower filesystem to do a rename, the lower target
inode's attributes were not copied up to the eCryptfs target inode. This
resulted in the eCryptfs target inode staying around, rather than being
evicted, because i_nlink was not updated for the eCryptfs inode. This
also meant that eCryptfs didn't do the final iput() on the lower target
inode so it stayed around, as well. This would result in a failure to
free up space occupied by the target file in the rename() operation.
Both target inodes would eventually be evicted when the eCryptfs
filesystem was unmounted.

This patch calls fsstack_copy_attr_all() after the lower filesystem
does its ->rename() so that important inode attributes, such as i_nlink,
are updated at the eCryptfs layer. ecryptfs_evict_inode() is now called
and eCryptfs can drop its final reference on the lower inode.

http://launchpad.net/bugs/561129

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/ecryptfs/inode.c |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 534b129..cc7709e 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -619,6 +619,7 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	struct dentry *lower_old_dir_dentry;
 	struct dentry *lower_new_dir_dentry;
 	struct dentry *trap = NULL;
+	struct inode *target_inode;
 
 	lower_old_dentry = ecryptfs_dentry_to_lower(old_dentry);
 	lower_new_dentry = ecryptfs_dentry_to_lower(new_dentry);
@@ -626,6 +627,7 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	dget(lower_new_dentry);
 	lower_old_dir_dentry = dget_parent(lower_old_dentry);
 	lower_new_dir_dentry = dget_parent(lower_new_dentry);
+	target_inode = new_dentry->d_inode;
 	trap = lock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
 	/* source should not be ancestor of target */
 	if (trap == lower_old_dentry) {
@@ -641,6 +643,9 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 			lower_new_dir_dentry->d_inode, lower_new_dentry);
 	if (rc)
 		goto out_lock;
+	if (target_inode)
+		fsstack_copy_attr_all(target_inode,
+				      ecryptfs_inode_to_lower(target_inode));
 	fsstack_copy_attr_all(new_dir, lower_new_dir_dentry->d_inode);
 	if (new_dir != old_dir)
 		fsstack_copy_attr_all(old_dir, lower_old_dir_dentry->d_inode);

[ 134/135] VFS: make vfs_fstat() use f[get|put]_light()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit e994defb7b6813ba6fa7a2a36e86d2455ad1dc35 upstream.

Use the *_light() versions that properly avoid doing the file user count
updates when they are unnecessary.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/stat.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/stat.c b/fs/stat.c
index c733dc5..88b36c7 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -57,12 +57,13 @@ EXPORT_SYMBOL(vfs_getattr);
 
 int vfs_fstat(unsigned int fd, struct kstat *stat)
 {
-	struct file *f = fget(fd);
+	int fput_needed;
+	struct file *f = fget_light(fd, &fput_needed);
 	int error = -EBADF;
 
 	if (f) {
 		error = vfs_getattr(f->f_path.mnt, f->f_path.dentry, stat);
-		fput(f);
+		fput_light(f, fput_needed);
 	}
 	return error;
 }

[ 135/135] vfs: make O_PATH file descriptors usable for fstat()

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1339 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 55815f70147dcfa3ead5738fd56d3574e2e3c1c2 upstream.

We already use them for openat() and friends, but fstat() also wants to
be able to use O_PATH file descriptors.  This should make it more
directly comparable to the O_SEARCH of Solaris.

Note that you could already do the same thing with "fstatat()" and an
empty path, but just doing "fstat()" directly is simpler and faster, so
there is no reason not to just allow it directly.

See also commit 332a2e1244bd, which did the same thing for fchdir, for
the same reasons.

Reported-by: ольга крыжановская <olga.kryzhanovska@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/stat.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/stat.c b/fs/stat.c
index b6ff118..4078022 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -58,7 +58,7 @@ EXPORT_SYMBOL(vfs_getattr);
 int vfs_fstat(unsigned int fd, struct kstat *stat)
 {
 	int fput_needed;
-	struct file *f = fget_light(fd, &fput_needed);
+	struct file *f = fget_raw_light(fd, &fput_needed);
 	int error = -EBADF;
 
 	if (f) {

Re: [ 000/135] 3.2.30-stable review

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 199766 bytes --]

diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index ab22fe6..e39a0c0 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -10,8 +10,8 @@ Required properties:
 
 Optional properties:
 - fsl,card-wired : Indicate the card is wired to host permanently
-- fsl,cd-internal : Indicate to use controller internal card detection
-- fsl,wp-internal : Indicate to use controller internal write protection
+- fsl,cd-controller : Indicate to use controller internal card detection
+- fsl,wp-controller : Indicate to use controller internal write protection
 - cd-gpios : Specify GPIOs for card detection
 - wp-gpios : Specify GPIOs for write protection
 
@@ -21,8 +21,8 @@ esdhc@70004000 {
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70004000 0x4000>;
 	interrupts = <1>;
-	fsl,cd-internal;
-	fsl,wp-internal;
+	fsl,cd-controller;
+	fsl,wp-controller;
 };
 
 esdhc@70008000 {
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 2871fd5..99d4e44 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -20,6 +20,8 @@ Supported adapters:
   * Intel Patsburg (PCH)
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
+  * Intel Lynx Point (PCH)
+  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/Makefile b/Makefile
index d96fc2a..27d591b 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 2
-SUBLEVEL = 29
-EXTRAVERSION =
+SUBLEVEL = 30
+EXTRAVERSION = -rc1
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 987c72d..9fdc151 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2065,6 +2065,7 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
 	tristate "CPUfreq driver for i.MX CPUs"
 	depends on ARCH_MXC && CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index dfcf3b0..362c7ca 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-%.dtb:
+%.dtb: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-dtbs:
+dtbs: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
 # We use MRPROPER_FILES and CLEAN_FILES now
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index f8766af..4790df2 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -29,8 +29,8 @@
 		aips@70000000 { /* aips-1 */
 			spba@70000000 {
 				esdhc@70004000 { /* ESDHC1 */
-					fsl,cd-internal;
-					fsl,wp-internal;
+					fsl,cd-controller;
+					fsl,wp-controller;
 					status = "okay";
 				};
 
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 8512475..9b419ab 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -232,6 +232,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
+#define pte_none(pte)		(!pte_val(pte))
+#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
+#define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
+#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
+#define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
+#define pte_special(pte)	(0)
+
+#define pte_present_user(pte) \
+	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
+	 (L_PTE_PRESENT | L_PTE_USER))
+
 #if __LINUX_ARM_ARCH__ < 6
 static inline void __sync_icache_dcache(pte_t pteval)
 {
@@ -243,25 +255,15 @@ extern void __sync_icache_dcache(pte_t pteval);
 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pteval)
 {
-	if (addr >= TASK_SIZE)
-		set_pte_ext(ptep, pteval, 0);
-	else {
+	unsigned long ext = 0;
+
+	if (addr < TASK_SIZE && pte_present_user(pteval)) {
 		__sync_icache_dcache(pteval);
-		set_pte_ext(ptep, pteval, PTE_EXT_NG);
+		ext |= PTE_EXT_NG;
 	}
-}
 
-#define pte_none(pte)		(!pte_val(pte))
-#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
-#define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
-#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
-#define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
-#define pte_special(pte)	(0)
-
-#define pte_present_user(pte) \
-	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
-	 (L_PTE_PRESENT | L_PTE_USER))
+	set_pte_ext(ptep, pteval, ext);
+}
 
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 814a52a9..2bc1a8e 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -160,6 +160,12 @@ static int debug_arch_supported(void)
 		arch >= ARM_DEBUG_ARCH_V7_1;
 }
 
+/* Can we determine the watchpoint access type from the fsr? */
+static int debug_exception_updates_fsr(void)
+{
+	return 0;
+}
+
 /* Determine number of WRP registers available. */
 static int get_num_wrp_resources(void)
 {
@@ -620,18 +626,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 	info->address &= ~alignment_mask;
 	info->ctrl.len <<= offset;
 
-	/*
-	 * Currently we rely on an overflow handler to take
-	 * care of single-stepping the breakpoint when it fires.
-	 * In the case of userspace breakpoints on a core with V7 debug,
-	 * we can use the mismatch feature as a poor-man's hardware
-	 * single-step, but this only works for per-task breakpoints.
-	 */
-	if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
-	    !core_has_mismatch_brps() || !bp->hw.bp_target)) {
-		pr_warning("overflow handler required but none found\n");
-		ret = -EINVAL;
+	if (!bp->overflow_handler) {
+		/*
+		 * Mismatch breakpoints are required for single-stepping
+		 * breakpoints.
+		 */
+		if (!core_has_mismatch_brps())
+			return -EINVAL;
+
+		/* We don't allow mismatch breakpoints in kernel space. */
+		if (arch_check_bp_in_kernelspace(bp))
+			return -EPERM;
+
+		/*
+		 * Per-cpu breakpoints are not supported by our stepping
+		 * mechanism.
+		 */
+		if (!bp->hw.bp_target)
+			return -EINVAL;
+
+		/*
+		 * We only support specific access types if the fsr
+		 * reports them.
+		 */
+		if (!debug_exception_updates_fsr() &&
+		    (info->ctrl.type == ARM_BREAKPOINT_LOAD ||
+		     info->ctrl.type == ARM_BREAKPOINT_STORE))
+			return -EINVAL;
 	}
+
 out:
 	return ret;
 }
@@ -707,10 +730,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 				goto unlock;
 
 			/* Check that the access type matches. */
-			access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
-				 HW_BREAKPOINT_R;
-			if (!(access & hw_breakpoint_type(wp)))
-				goto unlock;
+			if (debug_exception_updates_fsr()) {
+				access = (fsr & ARM_FSR_ACCESS_MASK) ?
+					  HW_BREAKPOINT_W : HW_BREAKPOINT_R;
+				if (!(access & hw_breakpoint_type(wp)))
+					goto unlock;
+			}
 
 			/* We have a winner. */
 			info->trigger = addr;
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 8380bd1..7ac5dfd 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -380,20 +380,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 #endif
 			instr = *(u32 *) pc;
 	} else if (thumb_mode(regs)) {
-		get_user(instr, (u16 __user *)pc);
+		if (get_user(instr, (u16 __user *)pc))
+			goto die_sig;
 		if (is_wide_instruction(instr)) {
 			unsigned int instr2;
-			get_user(instr2, (u16 __user *)pc+1);
+			if (get_user(instr2, (u16 __user *)pc+1))
+				goto die_sig;
 			instr <<= 16;
 			instr |= instr2;
 		}
-	} else {
-		get_user(instr, (u32 __user *)pc);
+	} else if (get_user(instr, (u32 __user *)pc)) {
+		goto die_sig;
 	}
 
 	if (call_undef_hook(regs, instr) == 0)
 		return;
 
+die_sig:
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 1620b15..cb105bf8 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -92,7 +92,7 @@ void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data, &dove_mbus_dram_info,
 			DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM,
-			0, get_tclk());
+			0, get_tclk(), 1600);
 }
 
 /*****************************************************************************
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 20ed2d5..f8f7437 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void)
 	  : "cc");
 }
 
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-		"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
-	cpu_do_idle();
-	cpu_leave_lowpower();
 
-	/* We should never return from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+	/* spin here until hardware takes it down */
+	while (1)
+		;
 }
 
 int platform_cpu_disable(unsigned int cpu)
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c5dbbb3..06faa97 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -88,7 +88,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 
 	orion_ge00_init(eth_data, &kirkwood_mbus_dram_info,
 			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
-			IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk);
+			IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk, 1600);
 }
 
 
@@ -102,7 +102,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 
 	orion_ge01_init(eth_data, &kirkwood_mbus_dram_info,
 			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
-			IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk);
+			IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk, 1600);
 }
 
 
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index d90e244..570ee4d 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -202,7 +202,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data, &mv78xx0_mbus_dram_info,
 			GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
-			IRQ_MV78XX0_GE_ERR, get_tclk());
+			IRQ_MV78XX0_GE_ERR, get_tclk(),
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
@@ -213,7 +214,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data, &mv78xx0_mbus_dram_info,
 			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ, get_tclk());
+			NO_IRQ, get_tclk(),
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 53b68b8..20260db 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -95,7 +95,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data, &orion5x_mbus_dram_info,
 			ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
-			IRQ_ORION5X_ETH_ERR, orion5x_tclk);
+			IRQ_ORION5X_ETH_ERR, orion5x_tclk,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 1a8d4aa..8fda9f7 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -236,8 +236,6 @@ void __sync_icache_dcache(pte_t pteval)
 	struct page *page;
 	struct address_space *mapping;
 
-	if (!pte_present_user(pteval))
-		return;
 	if (cache_is_vipt_nonaliasing() && !pte_exec(pteval))
 		/* only flush non-aliasing VIPT caches for exec mappings */
 		return;
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index af3b92b..f9adbbb 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -236,7 +236,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
-	pm_runtime_put(&timer->pdev->dev);
+	pm_runtime_put_sync(&timer->pdev->dev);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 11dce87..8a6886a 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -263,10 +263,12 @@ void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
 			    unsigned long irq_err,
-			    int tclk)
+			    int tclk,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge00_shared_data, mbus_dram_info, tclk,
 		    orion_ge00_resources, irq, &orion_ge00_shared,
 		    eth_data, &orion_ge00);
@@ -317,10 +319,12 @@ void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
 			    unsigned long irq_err,
-			    int tclk)
+			    int tclk,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge01_shared_data, mbus_dram_info, tclk,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
 		    eth_data, &orion_ge01);
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index a2c0e31..b637dae 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -41,14 +41,16 @@ void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
 			    unsigned long irq_err,
-			    int tclk);
+			    int tclk,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    struct mbus_dram_target_info *mbus_dram_info,
 			    unsigned long mapbase,
 			    unsigned long irq,
 			    unsigned long irq_err,
-			    int tclk);
+			    int tclk,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    struct mbus_dram_target_info *mbus_dram_info,
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 8a90b6a..1eedf8d 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -431,7 +431,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
  * when necessary.
 */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 4054b31..c4b779b 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -247,7 +247,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_sub_and_test(i,v)	(atomic_sub_return((i),(v)) == 0)
 
-#define ATOMIC_INIT(i)	((atomic_t) { (i) })
+#define ATOMIC_INIT(i)	{ (i) }
 
 #define smp_mb__before_atomic_dec()	smp_mb()
 #define smp_mb__after_atomic_dec()	smp_mb()
@@ -256,7 +256,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #ifdef CONFIG_64BIT
 
-#define ATOMIC64_INIT(i) ((atomic64_t) { (i) })
+#define ATOMIC64_INIT(i) { (i) }
 
 static __inline__ s64
 __atomic64_add_return(s64 i, atomic64_t *v)
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 7c5324f..cc20b0a 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -79,6 +79,7 @@ int main(void)
 	DEFINE(SIGSEGV, SIGSEGV);
 	DEFINE(NMI_MASK, NMI_MASK);
 	DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr));
+	DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit));
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
 #endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
index 2cc451a..6856062 100644
--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -28,6 +28,8 @@ void doorbell_setup_this_cpu(void)
 
 void doorbell_cause_ipi(int cpu, unsigned long data)
 {
+	/* Order previous accesses vs. msgsnd, which is treated as a store */
+	mb();
 	ppc_msgsnd(PPC_DBELL, 0, data);
 }
 
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d834425..654fc53 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -380,6 +380,12 @@ _GLOBAL(ret_from_fork)
 	li	r3,0
 	b	syscall_exit
 
+	.section	".toc","aw"
+DSCR_DEFAULT:
+	.tc dscr_default[TC],dscr_default
+
+	.section	".text"
+
 /*
  * This routine switches between two different tasks.  The process
  * state of one is saved on its kernel stack.  Then the state
@@ -519,9 +525,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	mr	r1,r8		/* start using new stack pointer */
 	std	r7,PACAKSAVE(r13)
 
-	ld	r6,_CCR(r1)
-	mtcrf	0xFF,r6
-
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
 	ld	r0,THREAD_VRSAVE(r4)
@@ -530,14 +533,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_PPC64
 BEGIN_FTR_SECTION
+	lwz	r6,THREAD_DSCR_INHERIT(r4)
+	ld	r7,DSCR_DEFAULT@toc(2)
 	ld	r0,THREAD_DSCR(r4)
-	cmpd	r0,r25
-	beq	1f
+	cmpwi	r6,0
+	bne	1f
+	ld	r0,0(r7)
+1:	cmpd	r0,r25
+	beq	2f
 	mtspr	SPRN_DSCR,r0
-1:	
+2:
 END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
 #endif
 
+	ld	r6,_CCR(r1)
+	mtcrf	0xFF,r6
+
 	/* r3-r13 are destroyed -- Cort */
 	REST_8GPRS(14, r1)
 	REST_10GPRS(22, r1)
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 6457574..d687e3f 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -778,16 +778,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 #endif /* CONFIG_PPC_STD_MMU_64 */
 #ifdef CONFIG_PPC64 
 	if (cpu_has_feature(CPU_FTR_DSCR)) {
-		if (current->thread.dscr_inherit) {
-			p->thread.dscr_inherit = 1;
-			p->thread.dscr = current->thread.dscr;
-		} else if (0 != dscr_default) {
-			p->thread.dscr_inherit = 1;
-			p->thread.dscr = dscr_default;
-		} else {
-			p->thread.dscr_inherit = 0;
-			p->thread.dscr = 0;
-		}
+		p->thread.dscr_inherit = current->thread.dscr_inherit;
+		p->thread.dscr = current->thread.dscr;
 	}
 #endif
 
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 6df7090..fe04b4a 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -214,8 +214,15 @@ void smp_muxed_ipi_message_pass(int cpu, int msg)
 	struct cpu_messages *info = &per_cpu(ipi_message, cpu);
 	char *message = (char *)&info->messages;
 
+	/*
+	 * Order previous accesses before accesses in the IPI handler.
+	 */
+	smp_mb();
 	message[msg] = 1;
-	mb();
+	/*
+	 * cause_ipi functions are required to include a full barrier
+	 * before doing whatever causes the IPI.
+	 */
 	smp_ops->cause_ipi(cpu, info->data);
 }
 
@@ -227,7 +234,7 @@ irqreturn_t smp_ipi_demux(void)
 	mb();	/* order any irq clear */
 
 	do {
-		all = xchg_local(&info->messages, 0);
+		all = xchg(&info->messages, 0);
 
 #ifdef __BIG_ENDIAN
 		if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION)))
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index ce035c1..55be64d 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -192,6 +192,14 @@ static ssize_t show_dscr_default(struct sysdev_class *class,
 	return sprintf(buf, "%lx\n", dscr_default);
 }
 
+static void update_dscr(void *dummy)
+{
+	if (!current->thread.dscr_inherit) {
+		current->thread.dscr = dscr_default;
+		mtspr(SPRN_DSCR, dscr_default);
+	}
+}
+
 static ssize_t __used store_dscr_default(struct sysdev_class *class,
 		struct sysdev_class_attribute *attr, const char *buf,
 		size_t count)
@@ -204,6 +212,8 @@ static ssize_t __used store_dscr_default(struct sysdev_class *class,
 		return -EINVAL;
 	dscr_default = val;
 
+	on_each_cpu(update_dscr, NULL, 1);
+
 	return count;
 }
 
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 5459d14..82dcd4d 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -942,8 +942,9 @@ static int emulate_instruction(struct pt_regs *regs)
 			cpu_has_feature(CPU_FTR_DSCR)) {
 		PPC_WARN_EMULATED(mtdscr, regs);
 		rd = (instword >> 21) & 0x1f;
-		mtspr(SPRN_DSCR, regs->gpr[rd]);
+		current->thread.dscr = regs->gpr[rd];
 		current->thread.dscr_inherit = 1;
+		mtspr(SPRN_DSCR, current->thread.dscr);
 		return 0;
 	}
 #endif
diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
index 9518d36..5c76bf7 100644
--- a/arch/powerpc/sysdev/xics/icp-hv.c
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -27,33 +27,53 @@ static inline unsigned int icp_hv_get_xirr(unsigned char cppr)
 {
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 	long rc;
+	unsigned int ret = XICS_IRQ_SPURIOUS;
 
 	rc = plpar_hcall(H_XIRR, retbuf, cppr);
-	if (rc != H_SUCCESS)
-		panic(" bad return code xirr - rc = %lx\n", rc);
-	return (unsigned int)retbuf[0];
+	if (rc == H_SUCCESS) {
+		ret = (unsigned int)retbuf[0];
+	} else {
+		pr_err("%s: bad return code xirr cppr=0x%x returned %ld\n",
+			__func__, cppr, rc);
+		WARN_ON_ONCE(1);
+	}
+
+	return ret;
 }
 
 static inline void icp_hv_set_xirr(unsigned int value)
 {
 	long rc = plpar_hcall_norets(H_EOI, value);
-	if (rc != H_SUCCESS)
-		panic("bad return code EOI - rc = %ld, value=%x\n", rc, value);
+	if (rc != H_SUCCESS) {
+		pr_err("%s: bad return code eoi xirr=0x%x returned %ld\n",
+			__func__, value, rc);
+		WARN_ON_ONCE(1);
+	}
 }
 
 static inline void icp_hv_set_cppr(u8 value)
 {
 	long rc = plpar_hcall_norets(H_CPPR, value);
-	if (rc != H_SUCCESS)
-		panic("bad return code cppr - rc = %lx\n", rc);
+	if (rc != H_SUCCESS) {
+		pr_err("%s: bad return code cppr cppr=0x%x returned %ld\n",
+			__func__, value, rc);
+		WARN_ON_ONCE(1);
+	}
 }
 
 static inline void icp_hv_set_qirr(int n_cpu , u8 value)
 {
-	long rc = plpar_hcall_norets(H_IPI, get_hard_smp_processor_id(n_cpu),
-				     value);
-	if (rc != H_SUCCESS)
-		panic("bad return code qirr - rc = %lx\n", rc);
+	int hw_cpu = get_hard_smp_processor_id(n_cpu);
+	long rc;
+
+	/* Make sure all previous accesses are ordered before IPI sending */
+	mb();
+	rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
+	if (rc != H_SUCCESS) {
+		pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x "
+			"returned %ld\n", __func__, n_cpu, hw_cpu, value, rc);
+		WARN_ON_ONCE(1);
+	}
 }
 
 static void icp_hv_eoi(struct irq_data *d)
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index b2c7179..bb104b4 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -78,9 +78,16 @@ static void __init xen_add_extra_mem(u64 start, u64 size)
 	memblock_x86_reserve_range(start, start + size, "XEN EXTRA");
 
 	xen_max_p2m_pfn = PFN_DOWN(start + size);
+	for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) {
+		unsigned long mfn = pfn_to_mfn(pfn);
+
+		if (WARN(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn))
+			continue;
+		WARN(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n",
+			pfn, mfn);
 
-	for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++)
 		__set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
+	}
 }
 
 static unsigned long __init xen_release_chunk(unsigned long start,
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index fb65915..608257a 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -386,6 +386,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9125 */
 	{ PCI_DEVICE(0x1b4b, 0x917a),
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 */
+	{ PCI_DEVICE(0x1b4b, 0x9192),
+	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 on some Gigabyte */
 	{ PCI_DEVICE(0x1b4b, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
 
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 8323fc3..3f1799b 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1625,10 +1625,8 @@ int drm_mode_cursor_ioctl(struct drm_device *dev,
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		return -EINVAL;
 
-	if (!req->flags) {
-		DRM_ERROR("no operation set\n");
+	if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags))
 		return -EINVAL;
-	}
 
 	mutex_lock(&dev->mode_config.mutex);
 	obj = drm_mode_object_find(dev, req->crtc_id, DRM_MODE_OBJECT_CRTC);
@@ -1641,7 +1639,6 @@ int drm_mode_cursor_ioctl(struct drm_device *dev,
 
 	if (req->flags & DRM_MODE_CURSOR_BO) {
 		if (!crtc->funcs->cursor_set) {
-			DRM_ERROR("crtc does not support cursor\n");
 			ret = -ENXIO;
 			goto out;
 		}
@@ -1654,7 +1651,6 @@ int drm_mode_cursor_ioctl(struct drm_device *dev,
 		if (crtc->funcs->cursor_move) {
 			ret = crtc->funcs->cursor_move(crtc, req->x, req->y);
 		} else {
-			DRM_ERROR("crtc does not support cursor\n");
 			ret = -EFAULT;
 			goto out;
 		}
@@ -1692,14 +1688,11 @@ int drm_mode_addfb(struct drm_device *dev,
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		return -EINVAL;
 
-	if ((config->min_width > r->width) || (r->width > config->max_width)) {
-		DRM_ERROR("mode new framebuffer width not within limits\n");
+	if ((config->min_width > r->width) || (r->width > config->max_width))
 		return -EINVAL;
-	}
-	if ((config->min_height > r->height) || (r->height > config->max_height)) {
-		DRM_ERROR("mode new framebuffer height not within limits\n");
+
+	if ((config->min_height > r->height) || (r->height > config->max_height))
 		return -EINVAL;
-	}
 
 	mutex_lock(&dev->mode_config.mutex);
 
@@ -1756,7 +1749,6 @@ int drm_mode_rmfb(struct drm_device *dev,
 	obj = drm_mode_object_find(dev, *id, DRM_MODE_OBJECT_FB);
 	/* TODO check that we really get a framebuffer back. */
 	if (!obj) {
-		DRM_ERROR("mode invalid framebuffer id\n");
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1767,7 +1759,6 @@ int drm_mode_rmfb(struct drm_device *dev,
 			found = 1;
 
 	if (!found) {
-		DRM_ERROR("tried to remove a fb that we didn't own\n");
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1814,7 +1805,6 @@ int drm_mode_getfb(struct drm_device *dev,
 	mutex_lock(&dev->mode_config.mutex);
 	obj = drm_mode_object_find(dev, r->fb_id, DRM_MODE_OBJECT_FB);
 	if (!obj) {
-		DRM_ERROR("invalid framebuffer id\n");
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1850,7 +1840,6 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev,
 	mutex_lock(&dev->mode_config.mutex);
 	obj = drm_mode_object_find(dev, r->fb_id, DRM_MODE_OBJECT_FB);
 	if (!obj) {
-		DRM_ERROR("invalid framebuffer id\n");
 		ret = -EINVAL;
 		goto out_err1;
 	}
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index a1ee634..0c1a99b 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -66,6 +66,8 @@
 #define EDID_QUIRK_FIRST_DETAILED_PREFERRED	(1 << 5)
 /* use +hsync +vsync for detailed mode */
 #define EDID_QUIRK_DETAILED_SYNC_PP		(1 << 6)
+/* Force reduced-blanking timings for detailed modes */
+#define EDID_QUIRK_FORCE_REDUCED_BLANKING	(1 << 7)
 
 struct detailed_mode_closure {
 	struct drm_connector *connector;
@@ -85,6 +87,9 @@ static struct edid_quirk {
 	int product_id;
 	u32 quirks;
 } edid_quirk_list[] = {
+	/* ASUS VW222S */
+	{ "ACI", 0x22a2, EDID_QUIRK_FORCE_REDUCED_BLANKING },
+
 	/* Acer AL1706 */
 	{ "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 },
 	/* Acer F51 */
@@ -120,6 +125,9 @@ static struct edid_quirk {
 	/* Samsung SyncMaster 22[5-6]BW */
 	{ "SAM", 596, EDID_QUIRK_PREFER_LARGE_60 },
 	{ "SAM", 638, EDID_QUIRK_PREFER_LARGE_60 },
+
+	/* ViewSonic VA2026w */
+	{ "VSC", 5020, EDID_QUIRK_FORCE_REDUCED_BLANKING },
 };
 
 /*** DDC fetch and block validation ***/
@@ -863,12 +871,19 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 				"Wrong Hsync/Vsync pulse width\n");
 		return NULL;
 	}
+
+	if (quirks & EDID_QUIRK_FORCE_REDUCED_BLANKING) {
+		mode = drm_cvt_mode(dev, hactive, vactive, 60, true, false, false);
+		if (!mode)
+			return NULL;
+
+		goto set_size;
+	}
+
 	mode = drm_mode_create(dev);
 	if (!mode)
 		return NULL;
 
-	mode->type = DRM_MODE_TYPE_DRIVER;
-
 	if (quirks & EDID_QUIRK_135_CLOCK_TOO_HIGH)
 		timing->pixel_clock = cpu_to_le16(1088);
 
@@ -892,8 +907,6 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 
 	drm_mode_do_interlace_quirk(mode, pt);
 
-	drm_mode_set_name(mode);
-
 	if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
 		pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE;
 	}
@@ -903,6 +916,7 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 	mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ?
 		DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
 
+set_size:
 	mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
 	mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
 
@@ -916,6 +930,9 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
 		mode->height_mm = edid->height_cm * 10;
 	}
 
+	mode->type = DRM_MODE_TYPE_DRIVER;
+	drm_mode_set_name(mode);
+
 	return mode;
 }
 
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 578ddfc..c8b5bc1 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2006,10 +2006,22 @@ static int i915_driver_irq_postinstall(struct drm_device *dev)
 			hotplug_en |= HDMIC_HOTPLUG_INT_EN;
 		if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
 			hotplug_en |= HDMID_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
-			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
-		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
-			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		if (IS_G4X(dev)) {
+			if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X)
+				hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+			if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X)
+				hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		} else if (IS_GEN4(dev)) {
+			if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965)
+				hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+			if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965)
+				hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		} else {
+			if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
+				hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+			if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
+				hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		}
 		if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
 			hotplug_en |= CRT_HOTPLUG_INT_EN;
 
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index fd53122..4a5e662 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1419,14 +1419,20 @@
 #define   DPC_HOTPLUG_INT_STATUS		(1 << 28)
 #define   HDMID_HOTPLUG_INT_STATUS		(1 << 27)
 #define   DPD_HOTPLUG_INT_STATUS		(1 << 27)
+/* CRT/TV common between gen3+ */
 #define   CRT_HOTPLUG_INT_STATUS		(1 << 11)
 #define   TV_HOTPLUG_INT_STATUS			(1 << 10)
 #define   CRT_HOTPLUG_MONITOR_MASK		(3 << 8)
 #define   CRT_HOTPLUG_MONITOR_COLOR		(3 << 8)
 #define   CRT_HOTPLUG_MONITOR_MONO		(2 << 8)
 #define   CRT_HOTPLUG_MONITOR_NONE		(0 << 8)
-#define   SDVOC_HOTPLUG_INT_STATUS		(1 << 7)
-#define   SDVOB_HOTPLUG_INT_STATUS		(1 << 6)
+/* SDVO is different across gen3/4 */
+#define   SDVOC_HOTPLUG_INT_STATUS_G4X		(1 << 3)
+#define   SDVOB_HOTPLUG_INT_STATUS_G4X		(1 << 2)
+#define   SDVOC_HOTPLUG_INT_STATUS_I965		(3 << 4)
+#define   SDVOB_HOTPLUG_INT_STATUS_I965		(3 << 2)
+#define   SDVOC_HOTPLUG_INT_STATUS_I915		(1 << 7)
+#define   SDVOB_HOTPLUG_INT_STATUS_I915		(1 << 6)
 
 /* SDVO port control */
 #define SDVOB			0x61140
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3eed270..6c3fb44 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1072,8 +1072,8 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
 				     enum pipe pipe, int reg)
 {
 	u32 val = I915_READ(reg);
-	WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
-	     "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
+	WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
+	     "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
 	     reg, pipe_name(pipe));
 }
 
@@ -1089,13 +1089,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
 
 	reg = PCH_ADPA;
 	val = I915_READ(reg);
-	WARN(adpa_pipe_enabled(dev_priv, val, pipe),
+	WARN(adpa_pipe_enabled(dev_priv, pipe, val),
 	     "PCH VGA enabled on transcoder %c, should be disabled\n",
 	     pipe_name(pipe));
 
 	reg = PCH_LVDS;
 	val = I915_READ(reg);
-	WARN(lvds_pipe_enabled(dev_priv, val, pipe),
+	WARN(lvds_pipe_enabled(dev_priv, pipe, val),
 	     "PCH LVDS enabled on transcoder %c, should be disabled\n",
 	     pipe_name(pipe));
 
@@ -1437,7 +1437,7 @@ static void disable_pch_hdmi(struct drm_i915_private *dev_priv,
 			     enum pipe pipe, int reg)
 {
 	u32 val = I915_READ(reg);
-	if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
+	if (hdmi_pipe_enabled(dev_priv, pipe, val)) {
 		DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
 			      reg, pipe);
 		I915_WRITE(reg, val & ~PORT_ENABLE);
@@ -1459,12 +1459,12 @@ static void intel_disable_pch_ports(struct drm_i915_private *dev_priv,
 
 	reg = PCH_ADPA;
 	val = I915_READ(reg);
-	if (adpa_pipe_enabled(dev_priv, val, pipe))
+	if (adpa_pipe_enabled(dev_priv, pipe, val))
 		I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);
 
 	reg = PCH_LVDS;
 	val = I915_READ(reg);
-	if (lvds_pipe_enabled(dev_priv, val, pipe)) {
+	if (lvds_pipe_enabled(dev_priv, pipe, val)) {
 		DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
 		I915_WRITE(reg, val & ~LVDS_PORT_EN);
 		POSTING_READ(reg);
@@ -2852,16 +2852,14 @@ static void intel_clear_scanline_wait(struct drm_device *dev)
 
 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
 {
-	struct drm_i915_gem_object *obj;
-	struct drm_i915_private *dev_priv;
+	struct drm_device *dev = crtc->dev;
 
 	if (crtc->fb == NULL)
 		return;
 
-	obj = to_intel_framebuffer(crtc->fb)->obj;
-	dev_priv = crtc->dev->dev_private;
-	wait_event(dev_priv->pending_flip_queue,
-		   atomic_read(&obj->pending_flip) == 0);
+	mutex_lock(&dev->struct_mutex);
+	intel_finish_fb(crtc->fb);
+	mutex_unlock(&dev->struct_mutex);
 }
 
 static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
@@ -3322,23 +3320,6 @@ static void intel_crtc_disable(struct drm_crtc *crtc)
 	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 	struct drm_device *dev = crtc->dev;
 
-	/* Flush any pending WAITs before we disable the pipe. Note that
-	 * we need to drop the struct_mutex in order to acquire it again
-	 * during the lowlevel dpms routines around a couple of the
-	 * operations. It does not look trivial nor desirable to move
-	 * that locking higher. So instead we leave a window for the
-	 * submission of further commands on the fb before we can actually
-	 * disable it. This race with userspace exists anyway, and we can
-	 * only rely on the pipe being disabled by userspace after it
-	 * receives the hotplug notification and has flushed any pending
-	 * batches.
-	 */
-	if (crtc->fb) {
-		mutex_lock(&dev->struct_mutex);
-		intel_finish_fb(crtc->fb);
-		mutex_unlock(&dev->struct_mutex);
-	}
-
 	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
 
 	if (crtc->fb) {
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index ceec71b..f07bde2 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -752,7 +752,7 @@ static const struct dmi_system_id intel_no_lvds[] = {
 		.ident = "Hewlett-Packard t5745",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_BOARD_NAME, "hp t5745"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "hp t5745"),
 		},
 	},
 	{
@@ -760,7 +760,7 @@ static const struct dmi_system_id intel_no_lvds[] = {
 		.ident = "Hewlett-Packard st5747",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_BOARD_NAME, "hp st5747"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "hp st5747"),
 		},
 	},
 	{
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index a8d8ee5..bbf247c 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2514,6 +2514,7 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_encoder *intel_encoder;
 	struct intel_sdvo *intel_sdvo;
+	u32 hotplug_mask;
 	int i;
 
 	intel_sdvo = kzalloc(sizeof(struct intel_sdvo), GFP_KERNEL);
@@ -2544,10 +2545,17 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
 		}
 	}
 
-	if (IS_SDVOB(sdvo_reg))
-		dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
-	else
-		dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
+	hotplug_mask = 0;
+	if (IS_G4X(dev)) {
+		hotplug_mask = IS_SDVOB(sdvo_reg) ?
+			SDVOB_HOTPLUG_INT_STATUS_G4X : SDVOC_HOTPLUG_INT_STATUS_G4X;
+	} else if (IS_GEN4(dev)) {
+		hotplug_mask = IS_SDVOB(sdvo_reg) ?
+			SDVOB_HOTPLUG_INT_STATUS_I965 : SDVOC_HOTPLUG_INT_STATUS_I965;
+	} else {
+		hotplug_mask = IS_SDVOB(sdvo_reg) ?
+			SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915;
+	}
 
 	drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
 
@@ -2555,14 +2563,6 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
 	if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
 		goto err;
 
-	/* Set up hotplug command - note paranoia about contents of reply.
-	 * We assume that the hardware is in a sane state, and only touch
-	 * the bits we think we understand.
-	 */
-	intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
-			     &intel_sdvo->hotplug_active, 2);
-	intel_sdvo->hotplug_active[0] &= ~0x3;
-
 	if (intel_sdvo_output_setup(intel_sdvo,
 				    intel_sdvo->caps.output_flags) != true) {
 		DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
@@ -2570,6 +2570,12 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
 		goto err;
 	}
 
+	/* Only enable the hotplug irq if we need it, to work around noisy
+	 * hotplug lines.
+	 */
+	if (intel_sdvo->hotplug_active[0])
+		dev_priv->hotplug_supported_mask |= hotplug_mask;
+
 	intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
 
 	/* Set the input timing to the screen. Assume always input 0. */
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index b12fd2c..6adef06 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -381,7 +381,7 @@ nouveau_display_dumb_create(struct drm_file *file_priv, struct drm_device *dev,
 	args->size = args->pitch * args->height;
 	args->size = roundup(args->size, PAGE_SIZE);
 
-	ret = nouveau_gem_new(dev, args->size, 0, TTM_PL_FLAG_VRAM, 0, 0, &bo);
+	ret = nouveau_gem_new(dev, args->size, 0, NOUVEAU_GEM_DOMAIN_VRAM, 0, 0, &bo);
 	if (ret)
 		return ret;
 
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 757c549..ceffd20 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1446,14 +1446,98 @@ static void radeon_legacy_atom_fixup(struct drm_crtc *crtc)
 	}
 }
 
+/**
+ * radeon_get_pll_use_mask - look up a mask of which pplls are in use
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the mask of which PPLLs (Pixel PLLs) are in use.
+ */
+static u32 radeon_get_pll_use_mask(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_crtc *test_crtc;
+	struct radeon_crtc *radeon_test_crtc;
+	u32 pll_in_use = 0;
+
+	list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
+		if (crtc == test_crtc)
+			continue;
+
+		radeon_test_crtc = to_radeon_crtc(test_crtc);
+		if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
+			pll_in_use |= (1 << radeon_test_crtc->pll_id);
+	}
+	return pll_in_use;
+}
+
+/**
+ * radeon_get_shared_dp_ppll - return the PPLL used by another crtc for DP
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the PPLL (Pixel PLL) used by another crtc/encoder which is
+ * also in DP mode.  For DP, a single PPLL can be used for all DP
+ * crtcs/encoders.
+ */
+static int radeon_get_shared_dp_ppll(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_encoder *test_encoder;
+	struct radeon_crtc *radeon_test_crtc;
+
+	list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
+		if (test_encoder->crtc && (test_encoder->crtc != crtc)) {
+			if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
+				/* for DP use the same PLL for all */
+				radeon_test_crtc = to_radeon_crtc(test_encoder->crtc);
+				if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
+					return radeon_test_crtc->pll_id;
+			}
+		}
+	}
+	return ATOM_PPLL_INVALID;
+}
+
+/**
+ * radeon_atom_pick_pll - Allocate a PPLL for use by the crtc.
+ *
+ * @crtc: drm crtc
+ *
+ * Returns the PPLL (Pixel PLL) to be used by the crtc.  For DP monitors
+ * a single PPLL can be used for all DP crtcs/encoders.  For non-DP
+ * monitors a dedicated PPLL must be used.  If a particular board has
+ * an external DP PLL, return ATOM_PPLL_INVALID to skip PLL programming
+ * as there is no need to program the PLL itself.  If we are not able to
+ * allocate a PLL, return ATOM_PPLL_INVALID to skip PLL programming to
+ * avoid messing up an existing monitor.
+ *
+ * Asic specific PLL information
+ *
+ * DCE 6.1
+ * - PPLL2 is only available to UNIPHYA (both DP and non-DP)
+ * - PPLL0, PPLL1 are available for UNIPHYB/C/D/E/F (both DP and non-DP)
+ *
+ * DCE 6.0
+ * - PPLL0 is available to all UNIPHY (DP only)
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ * DCE 5.0
+ * - DCPLL is available to all UNIPHY (DP only)
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ * DCE 3.0/4.0/4.1
+ * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
+ *
+ */
 static int radeon_atom_pick_pll(struct drm_crtc *crtc)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct drm_encoder *test_encoder;
-	struct drm_crtc *test_crtc;
-	uint32_t pll_in_use = 0;
+	u32 pll_in_use;
+	int pll;
 
 	if (ASIC_IS_DCE4(rdev)) {
 		list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
@@ -1461,35 +1545,39 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
 				/* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
 				 * depending on the asic:
 				 * DCE4: PPLL or ext clock
-				 * DCE5: DCPLL or ext clock
+				 * DCE5: PPLL, DCPLL, or ext clock
 				 *
 				 * Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
 				 * PPLL/DCPLL programming and only program the DP DTO for the
 				 * crtc virtual pixel clock.
 				 */
 				if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
-					if (ASIC_IS_DCE5(rdev) || rdev->clock.dp_extclk)
+					if (rdev->clock.dp_extclk)
+						/* skip PPLL programming if using ext clock */
 						return ATOM_PPLL_INVALID;
+					else if (ASIC_IS_DCE5(rdev))
+						/* use DCPLL for all DP */
+						return ATOM_DCPLL;
+					else {
+						/* use the same PPLL for all DP monitors */
+						pll = radeon_get_shared_dp_ppll(crtc);
+						if (pll != ATOM_PPLL_INVALID)
+							return pll;
+					}
 				}
+				break;
 			}
 		}
-
-		/* otherwise, pick one of the plls */
-		list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
-			struct radeon_crtc *radeon_test_crtc;
-
-			if (crtc == test_crtc)
-				continue;
-
-			radeon_test_crtc = to_radeon_crtc(test_crtc);
-			if ((radeon_test_crtc->pll_id >= ATOM_PPLL1) &&
-			    (radeon_test_crtc->pll_id <= ATOM_PPLL2))
-				pll_in_use |= (1 << radeon_test_crtc->pll_id);
-		}
-		if (!(pll_in_use & 1))
+		/* all other cases */
+		pll_in_use = radeon_get_pll_use_mask(crtc);
+		if (!(pll_in_use & (1 << ATOM_PPLL2)))
+			return ATOM_PPLL2;
+		if (!(pll_in_use & (1 << ATOM_PPLL1)))
 			return ATOM_PPLL1;
-		return ATOM_PPLL2;
+		DRM_ERROR("unable to allocate a PPLL\n");
+		return ATOM_PPLL_INVALID;
 	} else
+		/* use PPLL1 or PPLL2 */
 		return radeon_crtc->crtc_id;
 
 }
@@ -1578,10 +1666,25 @@ static void atombios_crtc_commit(struct drm_crtc *crtc)
 static void atombios_crtc_disable(struct drm_crtc *crtc)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_atom_ss ss;
+	int i;
 
 	atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
 
+	for (i = 0; i < rdev->num_crtc; i++) {
+		if (rdev->mode_info.crtcs[i] &&
+		    rdev->mode_info.crtcs[i]->enabled &&
+		    i != radeon_crtc->crtc_id &&
+		    radeon_crtc->pll_id == rdev->mode_info.crtcs[i]->pll_id) {
+			/* one other crtc is using this pll don't turn
+			 * off the pll
+			 */
+			goto done;
+		}
+	}
+
 	switch (radeon_crtc->pll_id) {
 	case ATOM_PPLL1:
 	case ATOM_PPLL2:
@@ -1592,7 +1695,8 @@ static void atombios_crtc_disable(struct drm_crtc *crtc)
 	default:
 		break;
 	}
-	radeon_crtc->pll_id = -1;
+done:
+	radeon_crtc->pll_id = ATOM_PPLL_INVALID;
 }
 
 static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
@@ -1641,6 +1745,6 @@ void radeon_atombios_init_crtc(struct drm_device *dev,
 		else
 			radeon_crtc->crtc_offset = 0;
 	}
-	radeon_crtc->pll_id = -1;
+	radeon_crtc->pll_id = ATOM_PPLL_INVALID;
 	drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
 }
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index 5351ee1..382e141 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -1344,6 +1344,8 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode)
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
+	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
 	struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
 	struct radeon_connector *radeon_connector = NULL;
 	struct radeon_connector_atom_dig *radeon_dig_connector = NULL;
@@ -1355,12 +1357,38 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode)
 
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
-		/* some early dce3.2 boards have a bug in their transmitter control table */
-		if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730) ||
-		    ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev))
+		if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) {
+			if (!connector)
+				dig->panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE;
+			else
+				dig->panel_mode = radeon_dp_get_panel_mode(encoder, connector);
+
+			/* setup and enable the encoder */
+			atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0);
+			atombios_dig_encoder_setup(encoder,
+						   ATOM_ENCODER_CMD_SETUP_PANEL_MODE,
+						   dig->panel_mode);
+			if (ext_encoder) {
+				if (ASIC_IS_DCE41(rdev))
+					atombios_external_encoder_setup(encoder, ext_encoder,
+									EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP);
+			}
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
+		} else if (ASIC_IS_DCE4(rdev)) {
+			/* setup and enable the encoder */
+			atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0);
+			/* enable the transmitter */
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
-		else
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
+		} else {
+			/* setup and enable the encoder and transmitter */
+			atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0);
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0);
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
+			/* some early dce3.2 boards have a bug in their transmitter control table */
+			if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730))
+				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
+		}
 		if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
 			if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
 				atombios_set_edp_panel_power(connector,
@@ -1377,10 +1405,19 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode)
 	case DRM_MODE_DPMS_STANDBY:
 	case DRM_MODE_DPMS_SUSPEND:
 	case DRM_MODE_DPMS_OFF:
-		if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev))
+		if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) {
+			/* disable the transmitter */
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-		else
+		} else if (ASIC_IS_DCE4(rdev)) {
+			/* disable the transmitter */
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
+		} else {
+			/* disable the encoder and transmitter */
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
+			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
+			atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
+		}
 		if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
 			if (ASIC_IS_DCE4(rdev))
 				atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0);
@@ -1805,10 +1842,12 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct drm_encoder *ext_encoder = radeon_get_external_encoder(encoder);
 
 	radeon_encoder->pixel_clock = adjusted_mode->clock;
 
+	/* need to call this here rather than in prepare() since we need some crtc info */
+	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+
 	if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE4(rdev)) {
 		if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT))
 			atombios_yuv_setup(encoder, true);
@@ -1827,38 +1866,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-		if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE5(rdev)) {
-			struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-			struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-
-			if (!connector)
-				dig->panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE;
-			else
-				dig->panel_mode = radeon_dp_get_panel_mode(encoder, connector);
-
-			/* setup and enable the encoder */
-			atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0);
-			atombios_dig_encoder_setup(encoder,
-						   ATOM_ENCODER_CMD_SETUP_PANEL_MODE,
-						   dig->panel_mode);
-		} else if (ASIC_IS_DCE4(rdev)) {
-			/* disable the transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-			/* setup and enable the encoder */
-			atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_SETUP, 0);
-
-			/* enable the transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
-		} else {
-			/* disable the encoder and transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-			atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
-
-			/* setup and enable the encoder and transmitter */
-			atombios_dig_encoder_setup(encoder, ATOM_ENABLE, 0);
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0);
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
-		}
+		/* handled in dpms */
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DDI:
 	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
@@ -1879,14 +1887,6 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
 		break;
 	}
 
-	if (ext_encoder) {
-		if (ASIC_IS_DCE41(rdev))
-			atombios_external_encoder_setup(encoder, ext_encoder,
-							EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP);
-		else
-			atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
-	}
-
 	atombios_apply_encoder_quirks(encoder, adjusted_mode);
 
 	if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
@@ -2059,7 +2059,6 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
 	}
 
 	radeon_atom_output_lock(encoder, true);
-	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
 
 	if (connector) {
 		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
@@ -2080,6 +2079,7 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
 
 static void radeon_atom_encoder_commit(struct drm_encoder *encoder)
 {
+	/* need to call this here as we need the crtc set up */
 	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
 	radeon_atom_output_lock(encoder, false);
 }
@@ -2120,14 +2120,7 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-		if (ASIC_IS_DCE4(rdev))
-			/* disable the transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-		else {
-			/* disable the encoder and transmitter */
-			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE, 0, 0);
-			atombios_dig_encoder_setup(encoder, ATOM_DISABLE, 0);
-		}
+		/* handled in dpms */
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DDI:
 	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 9231564..c5762e3 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -761,7 +761,7 @@ int radeon_device_init(struct radeon_device *rdev,
 	if (rdev->flags & RADEON_IS_AGP)
 		rdev->need_dma32 = true;
 	if ((rdev->flags & RADEON_IS_PCI) &&
-	    (rdev->family < CHIP_RS400))
+	    (rdev->family <= CHIP_RS740))
 		rdev->need_dma32 = true;
 
 	dma_bits = rdev->need_dma32 ? 32 : 40;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index dff8fc7..033fc96 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -178,6 +178,7 @@ static struct pci_device_id vmw_pci_id_list[] = {
 	{0x15ad, 0x0405, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VMWGFX_CHIP_SVGAII},
 	{0, 0, 0}
 };
+MODULE_DEVICE_TABLE(pci, vmw_pci_id_list);
 
 static int enable_fbdev;
 
@@ -1088,6 +1089,11 @@ static struct drm_driver driver = {
 	.master_drop = vmw_master_drop,
 	.open = vmw_driver_open,
 	.postclose = vmw_postclose,
+
+	.dumb_create = vmw_dumb_create,
+	.dumb_map_offset = vmw_dumb_map_offset,
+	.dumb_destroy = vmw_dumb_destroy,
+
 	.fops = {
 		 .owner = THIS_MODULE,
 		 .open = drm_open,
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index dc27970..0e3fa7d 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -641,6 +641,16 @@ int vmw_kms_readback(struct vmw_private *dev_priv,
 int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
 				struct drm_file *file_priv);
 
+int vmw_dumb_create(struct drm_file *file_priv,
+		    struct drm_device *dev,
+		    struct drm_mode_create_dumb *args);
+
+int vmw_dumb_map_offset(struct drm_file *file_priv,
+			struct drm_device *dev, uint32_t handle,
+			uint64_t *offset);
+int vmw_dumb_destroy(struct drm_file *file_priv,
+		     struct drm_device *dev,
+		     uint32_t handle);
 /**
  * Overlay control - vmwgfx_overlay.c
  */
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 1c7f09e..0795d17 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -1950,3 +1950,76 @@ err_ref:
 	vmw_resource_unreference(&res);
 	return ret;
 }
+
+
+int vmw_dumb_create(struct drm_file *file_priv,
+		    struct drm_device *dev,
+		    struct drm_mode_create_dumb *args)
+{
+	struct vmw_private *dev_priv = vmw_priv(dev);
+	struct vmw_master *vmaster = vmw_master(file_priv->master);
+	struct vmw_user_dma_buffer *vmw_user_bo;
+	struct ttm_buffer_object *tmp;
+	int ret;
+
+	args->pitch = args->width * ((args->bpp + 7) / 8);
+	args->size = args->pitch * args->height;
+
+	vmw_user_bo = kzalloc(sizeof(*vmw_user_bo), GFP_KERNEL);
+	if (vmw_user_bo == NULL)
+		return -ENOMEM;
+
+	ret = ttm_read_lock(&vmaster->lock, true);
+	if (ret != 0) {
+		kfree(vmw_user_bo);
+		return ret;
+	}
+
+	ret = vmw_dmabuf_init(dev_priv, &vmw_user_bo->dma, args->size,
+			      &vmw_vram_sys_placement, true,
+			      &vmw_user_dmabuf_destroy);
+	if (ret != 0)
+		goto out_no_dmabuf;
+
+	tmp = ttm_bo_reference(&vmw_user_bo->dma.base);
+	ret = ttm_base_object_init(vmw_fpriv(file_priv)->tfile,
+				   &vmw_user_bo->base,
+				   false,
+				   ttm_buffer_type,
+				   &vmw_user_dmabuf_release, NULL);
+	if (unlikely(ret != 0))
+		goto out_no_base_object;
+
+	args->handle = vmw_user_bo->base.hash.key;
+
+out_no_base_object:
+	ttm_bo_unref(&tmp);
+out_no_dmabuf:
+	ttm_read_unlock(&vmaster->lock);
+	return ret;
+}
+
+int vmw_dumb_map_offset(struct drm_file *file_priv,
+			struct drm_device *dev, uint32_t handle,
+			uint64_t *offset)
+{
+	struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
+	struct vmw_dma_buffer *out_buf;
+	int ret;
+
+	ret = vmw_user_dmabuf_lookup(tfile, handle, &out_buf);
+	if (ret != 0)
+		return -EINVAL;
+
+	*offset = out_buf->base.addr_space_offset;
+	vmw_dmabuf_unreference(&out_buf);
+	return 0;
+}
+
+int vmw_dumb_destroy(struct drm_file *file_priv,
+		     struct drm_device *dev,
+		     uint32_t handle)
+{
+	return ttm_ref_object_base_unref(vmw_fpriv(file_priv)->tfile,
+					 handle, TTM_REF_USAGE);
+}
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index d21f6d0..b5cc078 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -350,6 +350,7 @@ config HID_MULTITOUCH
 	  - Lumio CrystalTouch panels
 	  - MosArt dual-touch panels
 	  - PenMount dual touch panels
+	  - PixArt optical touch screen
 	  - Pixcir dual touch panels
 	  - eGalax dual-touch panels, including the Joojoo and Wetab tablets
 	  - Stantum multitouch panels
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 5cc029f..0c8bea9 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1507,6 +1507,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_PCI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index e4317a2..ab75a4e 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -593,6 +593,11 @@
 #define USB_VENDOR_ID_PI_ENGINEERING	0x05f3
 #define USB_DEVICE_ID_PI_ENGINEERING_VEC_USB_FOOTPEDAL	0xff
 
+#define USB_VENDOR_ID_PIXART				0x093a
+#define USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN	0x8001
+#define USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1	0x8002
+#define USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2	0x8003
+
 #define USB_VENDOR_ID_PLAYDOTCOM	0x0b43
 #define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII	0x0003
 
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 995fc4c..13af0f1 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -93,6 +93,7 @@ struct mt_class {
 #define MT_CLS_DUAL_INRANGE_CONTACTID		0x0005
 #define MT_CLS_DUAL_INRANGE_CONTACTNUMBER	0x0006
 #define MT_CLS_DUAL_NSMU_CONTACTID		0x0007
+#define MT_CLS_INRANGE_CONTACTNUMBER		0x0009
 
 /* vendor specific classes */
 #define MT_CLS_3M				0x0101
@@ -155,6 +156,9 @@ struct mt_class mt_classes[] = {
 		.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP |
 			MT_QUIRK_SLOT_IS_CONTACTID,
 		.maxcontacts = 2 },
+	{ .name = MT_CLS_INRANGE_CONTACTNUMBER,
+		.quirks = MT_QUIRK_VALID_IS_INRANGE |
+			MT_QUIRK_SLOT_IS_CONTACTNUMBER },
 
 	/*
 	 * vendor specific classes
@@ -744,6 +748,17 @@ static const struct hid_device_id mt_devices[] = {
 		HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT,
 			USB_DEVICE_ID_PENMOUNT_PCI) },
 
+	/* PixArt optical touch screen */
+	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
+		HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
+			USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN) },
+	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
+		HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
+			USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1) },
+	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
+		HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
+			USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2) },
+
 	/* PixCir-based panels */
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
 		HID_USB_DEVICE(USB_VENDOR_ID_HANVON,
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 1fe6b80..afb73af 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -68,6 +68,10 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 00e9851..83d2fbd6 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -34,6 +34,12 @@ static const struct dmi_system_id __initconst atk_force_new_if[] = {
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "SABERTOOTH X58")
 		}
+	}, {
+		/* Old interface reads the same sensor for fan0 and fan1 */
+		.ident = "Asus M5A78L",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "M5A78L")
+		}
 	},
 	{ }
 };
diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c
index 0018c7d..1a174f0 100644
--- a/drivers/hwmon/twl4030-madc-hwmon.c
+++ b/drivers/hwmon/twl4030-madc-hwmon.c
@@ -44,12 +44,13 @@ static ssize_t madc_read(struct device *dev,
 			 struct device_attribute *devattr, char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct twl4030_madc_request req;
+	struct twl4030_madc_request req = {
+		.channels = 1 << attr->index,
+		.method = TWL4030_MADC_SW2,
+		.type = TWL4030_MADC_WAIT,
+	};
 	long val;
 
-	req.channels = (1 << attr->index);
-	req.method = TWL4030_MADC_SW2;
-	req.func_cb = NULL;
 	val = twl4030_madc_conversion(&req);
 	if (val < 0)
 		return val;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a3afac4..60f593c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -103,6 +103,8 @@ config I2C_I801
 	    Patsburg (PCH)
 	    DH89xxCC (PCH)
 	    Panther Point (PCH)
+	    Lynx Point (PCH)
+	    Lynx Point-LP (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
@@ -349,9 +351,13 @@ config I2C_DAVINCI
 	  devices such as DaVinci NIC.
 	  For details please see http://www.ti.com/davinci
 
+config I2C_DESIGNWARE_CORE
+	tristate
+
 config I2C_DESIGNWARE_PLATFORM
 	tristate "Synopsys DesignWare Platfrom"
 	depends on HAVE_CLK
+	select I2C_DESIGNWARE_CORE
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
@@ -362,6 +368,7 @@ config I2C_DESIGNWARE_PLATFORM
 config I2C_DESIGNWARE_PCI
 	tristate "Synopsys DesignWare PCI"
 	depends on PCI
+	select I2C_DESIGNWARE_CORE
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index fba6da6..d6b8779 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,10 +33,11 @@ obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
 obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
+obj-$(CONFIG_I2C_DESIGNWARE_CORE)	+= i2c-designware-core.o
 obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
-i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+i2c-designware-platform-objs := i2c-designware-platdrv.o
 obj-$(CONFIG_I2C_DESIGNWARE_PCI)	+= i2c-designware-pci.o
-i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
+i2c-designware-pci-objs := i2c-designware-pcidrv.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index df87992..6193349 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -25,6 +25,7 @@
  * ----------------------------------------------------------------------------
  *
  */
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <linux/errno.h>
 #include <linux/err.h>
@@ -305,6 +306,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	dw_writel(dev, dev->master_cfg , DW_IC_CON);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(i2c_dw_init);
 
 /*
  * Waiting for bus not busy
@@ -557,12 +559,14 @@ done:
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(i2c_dw_xfer);
 
 u32 i2c_dw_func(struct i2c_adapter *adap)
 {
 	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
 	return dev->functionality;
 }
+EXPORT_SYMBOL_GPL(i2c_dw_func);
 
 static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
 {
@@ -667,17 +671,20 @@ tx_aborted:
 
 	return IRQ_HANDLED;
 }
+EXPORT_SYMBOL_GPL(i2c_dw_isr);
 
 void i2c_dw_enable(struct dw_i2c_dev *dev)
 {
        /* Enable the adapter */
 	dw_writel(dev, 1, DW_IC_ENABLE);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_enable);
 
 u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev)
 {
 	return dw_readl(dev, DW_IC_ENABLE);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_is_enabled);
 
 void i2c_dw_disable(struct dw_i2c_dev *dev)
 {
@@ -688,18 +695,22 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)
 	dw_writel(dev, 0, DW_IC_INTR_MASK);
 	dw_readl(dev, DW_IC_CLR_INTR);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_disable);
 
 void i2c_dw_clear_int(struct dw_i2c_dev *dev)
 {
 	dw_readl(dev, DW_IC_CLR_INTR);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_clear_int);
 
 void i2c_dw_disable_int(struct dw_i2c_dev *dev)
 {
 	dw_writel(dev, 0, DW_IC_INTR_MASK);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_disable_int);
 
 u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
 {
 	return dw_readl(dev, DW_IC_COMP_PARAM_1);
 }
+EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index ab26840d..817d025 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -51,6 +51,8 @@
   Patsburg (PCH) IDF    0x1d72     32     hard     yes     yes     yes
   DH89xxCC (PCH)        0x2330     32     hard     yes     yes     yes
   Panther Point (PCH)   0x1e22     32     hard     yes     yes     yes
+  Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
+  Lynx Point-LP (PCH)   0x9c22     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -145,6 +147,8 @@
 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS	0x9c22
 
 struct i801_priv {
 	struct i2c_adapter adapter;
@@ -633,6 +637,8 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
 	{ 0, }
 };
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index b4cfc6c..d4ec371 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -177,6 +177,20 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
+		/* Gigabyte T1005 - defines wrong chassis type ("Other") */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T1005"),
+		},
+	},
+	{
+		/* Gigabyte T1005M/P - defines wrong chassis type ("Other") */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T1005M/P"),
+		},
+	},
+	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"),
diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c
index d497db0..509135f 100644
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -16,7 +16,6 @@
 #include <linux/sched.h>
 #include "isdnloop.h"
 
-static char *revision = "$Revision: 1.11.6.7 $";
 static char *isdnloop_id = "loop0";
 
 MODULE_DESCRIPTION("ISDN4Linux: Pseudo Driver that simulates an ISDN card");
@@ -1494,17 +1493,6 @@ isdnloop_addcard(char *id1)
 static int __init
 isdnloop_init(void)
 {
-	char *p;
-	char rev[10];
-
-	if ((p = strchr(revision, ':'))) {
-		strcpy(rev, p + 1);
-		p = strchr(rev, '$');
-		*p = 0;
-	} else
-		strcpy(rev, " ??? ");
-	printk(KERN_NOTICE "isdnloop-ISDN-driver Rev%s\n", rev);
-
 	if (isdnloop_id)
 		return (isdnloop_addcard(isdnloop_id));
 
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 34416d4..74793af 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1339,7 +1339,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		/* complete ongoing async transfer before issuing discard */
 		if (card->host->areq)
 			mmc_blk_issue_rw_rq(mq, NULL);
-		if (req->cmd_flags & REQ_SECURE)
+		if (req->cmd_flags & REQ_SECURE &&
+			!(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN))
 			ret = mmc_blk_issue_secdiscard_rq(mq, req);
 		else
 			ret = mmc_blk_issue_discard_rq(mq, req);
@@ -1614,6 +1615,8 @@ static int mmc_add_disk(struct mmc_blk_data *md)
 	return ret;
 }
 
+#define CID_MANFID_SAMSUNG	0x15
+
 static const struct mmc_fixup blk_fixups[] =
 {
 	MMC_FIXUP("SEM02G", 0x2, 0x100, add_quirk, MMC_QUIRK_INAND_CMD38),
@@ -1644,6 +1647,28 @@ static const struct mmc_fixup blk_fixups[] =
 	MMC_FIXUP(CID_NAME_ANY, 0x13, 0x200, add_quirk_mmc,
 		  MMC_QUIRK_LONG_READ_TIME),
 
+	/*
+	 * On these Samsung MoviNAND parts, performing secure erase or
+	 * secure trim can result in unrecoverable corruption due to a
+	 * firmware bug.
+	 */
+	MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+
 	END_FIXUP
 };
 
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 99b449d..f201bed 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -279,11 +279,11 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id)
 	writel(stat & MXS_MMC_IRQ_BITS,
 	       host->base + HW_SSP_CTRL1 + MXS_CLR_ADDR);
 
+	spin_unlock(&host->lock);
+
 	if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
 		mmc_signal_sdio_irq(host->mmc);
 
-	spin_unlock(&host->lock);
-
 	if (stat & BM_SSP_CTRL1_RESP_TIMEOUT_IRQ)
 		cmd->error = -ETIMEDOUT;
 	else if (stat & BM_SSP_CTRL1_RESP_ERR_IRQ)
@@ -628,10 +628,6 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 		       host->base + HW_SSP_CTRL0 + MXS_SET_ADDR);
 		writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
 		       host->base + HW_SSP_CTRL1 + MXS_SET_ADDR);
-
-		if (readl(host->base + HW_SSP_STATUS) & BM_SSP_STATUS_SDIO_IRQ)
-			mmc_signal_sdio_irq(host->mmc);
-
 	} else {
 		writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
 		       host->base + HW_SSP_CTRL0 + MXS_CLR_ADDR);
@@ -640,6 +636,10 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	}
 
 	spin_unlock_irqrestore(&host->lock, flags);
+
+	if (enable && readl(host->base + HW_SSP_STATUS) & BM_SSP_STATUS_SDIO_IRQ)
+		mmc_signal_sdio_irq(host->mmc);
+
 }
 
 static const struct mmc_host_ops mxs_mmc_ops = {
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
index c3b08f1..62ca03a 100644
--- a/drivers/mmc/host/sdhci-esdhc.h
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -48,14 +48,14 @@ static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock)
 	int div = 1;
 	u32 temp;
 
+	if (clock == 0)
+		goto out;
+
 	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
 	temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
 		| ESDHC_CLOCK_MASK);
 	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 
-	if (clock == 0)
-		goto out;
-
 	while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
 		pre_div *= 2;
 
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 890754c..95b29f5 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -346,7 +346,7 @@ retry:
 	 */
 	err = ubi_scan_add_used(ubi, si, new_seb->pnum, new_seb->ec,
 				vid_hdr, 0);
-	kfree(new_seb);
+	kmem_cache_free(si->scan_leb_slab, new_seb);
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
 
@@ -359,7 +359,7 @@ write_error:
 		list_add(&new_seb->u.list, &si->erase);
 		goto retry;
 	}
-	kfree(new_seb);
+	kmem_cache_free(si->scan_leb_slab, new_seb);
 out_free:
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index 330140e..9bcc39a 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -83,6 +83,11 @@
 #define INSTRUCTION_LOAD_TXB(n)	(0x40 + 2 * (n))
 #define INSTRUCTION_READ_RXB(n)	(((n) == 0) ? 0x90 : 0x94)
 #define INSTRUCTION_RESET	0xC0
+#define RTS_TXB0		0x01
+#define RTS_TXB1		0x02
+#define RTS_TXB2		0x04
+#define INSTRUCTION_RTS(n)	(0x80 | ((n) & 0x07))
+
 
 /* MPC251x registers */
 #define CANSTAT	      0x0e
@@ -397,6 +402,7 @@ static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf,
 static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
 			  int tx_buf_idx)
 {
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
 	u32 sid, eid, exide, rtr;
 	u8 buf[SPI_TRANSFER_BUF_LEN];
 
@@ -418,7 +424,10 @@ static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
 	buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->can_dlc;
 	memcpy(buf + TXBDAT_OFF, frame->data, frame->can_dlc);
 	mcp251x_hw_tx_frame(spi, buf, frame->can_dlc, tx_buf_idx);
-	mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx), TXBCTRL_TXREQ);
+
+	/* use INSTRUCTION_RTS, to avoid "repeated frame problem" */
+	priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx);
+	mcp251x_spi_trans(priv->spi, 1);
 }
 
 static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 83199fd..d0722a7 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1041,7 +1041,7 @@ static int gfar_probe(struct platform_device *ofdev)
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) {
 		dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-		dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+		dev->features |= NETIF_F_HW_VLAN_RX;
 	}
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) {
diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index b1cd41b..021463b 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -472,14 +472,9 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
 	}
 
 	if (adapter->rx_queue.queue_addr != NULL) {
-		if (!dma_mapping_error(dev, adapter->rx_queue.queue_dma)) {
-			dma_unmap_single(dev,
-					adapter->rx_queue.queue_dma,
-					adapter->rx_queue.queue_len,
-					DMA_BIDIRECTIONAL);
-			adapter->rx_queue.queue_dma = DMA_ERROR_CODE;
-		}
-		kfree(adapter->rx_queue.queue_addr);
+		dma_free_coherent(dev, adapter->rx_queue.queue_len,
+				  adapter->rx_queue.queue_addr,
+				  adapter->rx_queue.queue_dma);
 		adapter->rx_queue.queue_addr = NULL;
 	}
 
@@ -556,10 +551,13 @@ static int ibmveth_open(struct net_device *netdev)
 		goto err_out;
 	}
 
+	dev = &adapter->vdev->dev;
+
 	adapter->rx_queue.queue_len = sizeof(struct ibmveth_rx_q_entry) *
 						rxq_entries;
-	adapter->rx_queue.queue_addr = kmalloc(adapter->rx_queue.queue_len,
-						GFP_KERNEL);
+	adapter->rx_queue.queue_addr =
+	    dma_alloc_coherent(dev, adapter->rx_queue.queue_len,
+			       &adapter->rx_queue.queue_dma, GFP_KERNEL);
 
 	if (!adapter->rx_queue.queue_addr) {
 		netdev_err(netdev, "unable to allocate rx queue pages\n");
@@ -567,19 +565,13 @@ static int ibmveth_open(struct net_device *netdev)
 		goto err_out;
 	}
 
-	dev = &adapter->vdev->dev;
-
 	adapter->buffer_list_dma = dma_map_single(dev,
 			adapter->buffer_list_addr, 4096, DMA_BIDIRECTIONAL);
 	adapter->filter_list_dma = dma_map_single(dev,
 			adapter->filter_list_addr, 4096, DMA_BIDIRECTIONAL);
-	adapter->rx_queue.queue_dma = dma_map_single(dev,
-			adapter->rx_queue.queue_addr,
-			adapter->rx_queue.queue_len, DMA_BIDIRECTIONAL);
 
 	if ((dma_mapping_error(dev, adapter->buffer_list_dma)) ||
-	    (dma_mapping_error(dev, adapter->filter_list_dma)) ||
-	    (dma_mapping_error(dev, adapter->rx_queue.queue_dma))) {
+	    (dma_mapping_error(dev, adapter->filter_list_dma))) {
 		netdev_err(netdev, "unable to map filter or buffer list "
 			   "pages\n");
 		rc = -ENOMEM;
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index f478a22..8e362bb 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -302,6 +302,7 @@ struct e1000_adapter {
 	 */
 	struct e1000_ring *tx_ring /* One per active queue */
 						____cacheline_aligned_in_smp;
+	u32 tx_fifo_limit;
 
 	struct napi_struct napi;
 
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 64d3f98..0182649 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3386,6 +3386,15 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	}
 
 	/*
+	 * Alignment of Tx data is on an arbitrary byte boundary with the
+	 * maximum size per Tx descriptor limited only to the transmit
+	 * allocation of the packet buffer minus 96 bytes with an upper
+	 * limit of 24KB due to receive synchronization limitations.
+	 */
+	adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96,
+				       24 << 10);
+
+	/*
 	 * Disable Adaptive Interrupt Moderation if 2 full packets cannot
 	 * fit in receive buffer and early-receive not supported.
 	 */
@@ -4647,13 +4656,9 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
 	return 1;
 }
 
-#define E1000_MAX_PER_TXD	8192
-#define E1000_MAX_TXD_PWR	12
-
 static int e1000_tx_map(struct e1000_adapter *adapter,
 			struct sk_buff *skb, unsigned int first,
-			unsigned int max_per_txd, unsigned int nr_frags,
-			unsigned int mss)
+			unsigned int max_per_txd, unsigned int nr_frags)
 {
 	struct e1000_ring *tx_ring = adapter->tx_ring;
 	struct pci_dev *pdev = adapter->pdev;
@@ -4882,20 +4887,19 @@ static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
+	BUG_ON(size > adapter->tx_ring->count);
+
 	if (e1000_desc_unused(adapter->tx_ring) >= size)
 		return 0;
 	return __e1000_maybe_stop_tx(netdev, size);
 }
 
-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				    struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_ring *tx_ring = adapter->tx_ring;
 	unsigned int first;
-	unsigned int max_per_txd = E1000_MAX_PER_TXD;
-	unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
 	unsigned int tx_flags = 0;
 	unsigned int len = skb_headlen(skb);
 	unsigned int nr_frags;
@@ -4915,18 +4919,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 	}
 
 	mss = skb_shinfo(skb)->gso_size;
-	/*
-	 * The controller does a simple calculation to
-	 * make sure there is enough room in the FIFO before
-	 * initiating the DMA for each buffer.  The calc is:
-	 * 4 = ceil(buffer len/mss).  To make sure we don't
-	 * overrun the FIFO, adjust the max buffer len if mss
-	 * drops.
-	 */
 	if (mss) {
 		u8 hdr_len;
-		max_per_txd = min(mss << 2, max_per_txd);
-		max_txd_pwr = fls(max_per_txd) - 1;
 
 		/*
 		 * TSO Workaround for 82571/2/3 Controllers -- if skb->data
@@ -4956,12 +4950,12 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		count++;
 	count++;
 
-	count += TXD_USE_COUNT(len, max_txd_pwr);
+	count += DIV_ROUND_UP(len, adapter->tx_fifo_limit);
 
 	nr_frags = skb_shinfo(skb)->nr_frags;
 	for (f = 0; f < nr_frags; f++)
-		count += TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->frags[f]),
-				       max_txd_pwr);
+		count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]),
+				      adapter->tx_fifo_limit);
 
 	if (adapter->hw.mac.tx_pkt_filtering)
 		e1000_transfer_dhcp_info(adapter, skb);
@@ -5000,12 +4994,15 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		tx_flags |= E1000_TX_FLAGS_IPV4;
 
 	/* if count is 0 then mapping error has occurred */
-	count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
+	count = e1000_tx_map(adapter, skb, first, adapter->tx_fifo_limit,
+			     nr_frags);
 	if (count) {
 		e1000_tx_queue(adapter, tx_flags, count);
 		/* Make sure there is space in the ring for the next send. */
-		e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
-
+		e1000_maybe_stop_tx(netdev,
+				    (MAX_SKB_FRAGS *
+				     DIV_ROUND_UP(PAGE_SIZE,
+						  adapter->tx_fifo_limit) + 2));
 	} else {
 		dev_kfree_skb_any(skb);
 		tx_ring->buffer_info[first].time_stamp = 0;
@@ -6150,8 +6147,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter->hw.phy.autoneg_advertised = 0x2f;
 
 	/* ring size defaults */
-	adapter->rx_ring->count = 256;
-	adapter->tx_ring->count = 256;
+	adapter->rx_ring->count = E1000_DEFAULT_RXD;
+	adapter->tx_ring->count = E1000_DEFAULT_TXD;
 
 	/*
 	 * Initial Wake on LAN setting - If APM wake is enabled in
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index d5731f1..a6611f1 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -1383,6 +1383,11 @@ static int efx_probe_all(struct efx_nic *efx)
 		goto fail2;
 	}
 
+	BUILD_BUG_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_RXQ_MIN_ENT);
+	if (WARN_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_TXQ_MIN_ENT(efx))) {
+		rc = -EINVAL;
+		goto fail3;
+	}
 	efx->rxq_entries = efx->txq_entries = EFX_DEFAULT_DMAQ_SIZE;
 	rc = efx_probe_channels(efx);
 	if (rc)
@@ -1973,6 +1978,7 @@ static int efx_register_netdev(struct efx_nic *efx)
 	net_dev->irq = efx->pci_dev->irq;
 	net_dev->netdev_ops = &efx_netdev_ops;
 	SET_ETHTOOL_OPS(net_dev, &efx_ethtool_ops);
+	net_dev->gso_max_segs = EFX_TSO_MAX_SEGS;
 
 	/* Clear MAC statistics */
 	efx->mac_op->update_stats(efx);
diff --git a/drivers/net/ethernet/sfc/efx.h b/drivers/net/ethernet/sfc/efx.h
index 4764793..1355245 100644
--- a/drivers/net/ethernet/sfc/efx.h
+++ b/drivers/net/ethernet/sfc/efx.h
@@ -34,6 +34,7 @@ extern netdev_tx_t
 efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb);
 extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index);
 extern int efx_setup_tc(struct net_device *net_dev, u8 num_tc);
+extern unsigned int efx_tx_max_skb_descs(struct efx_nic *efx);
 
 /* RX */
 extern int efx_probe_rx_queue(struct efx_rx_queue *rx_queue);
@@ -56,10 +57,15 @@ extern void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue);
 #define EFX_MAX_EVQ_SIZE 16384UL
 #define EFX_MIN_EVQ_SIZE 512UL
 
-/* The smallest [rt]xq_entries that the driver supports. Callers of
- * efx_wake_queue() assume that they can subsequently send at least one
- * skb. Falcon/A1 may require up to three descriptors per skb_frag. */
-#define EFX_MIN_RING_SIZE (roundup_pow_of_two(2 * 3 * MAX_SKB_FRAGS))
+/* Maximum number of TCP segments we support for soft-TSO */
+#define EFX_TSO_MAX_SEGS	100
+
+/* The smallest [rt]xq_entries that the driver supports.  RX minimum
+ * is a bit arbitrary.  For TX, we must have space for at least 2
+ * TSO skbs.
+ */
+#define EFX_RXQ_MIN_ENT		128U
+#define EFX_TXQ_MIN_ENT(efx)	(2 * efx_tx_max_skb_descs(efx))
 
 /* Filters */
 extern int efx_probe_filters(struct efx_nic *efx);
diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c
index f3cd96d..90158c9 100644
--- a/drivers/net/ethernet/sfc/ethtool.c
+++ b/drivers/net/ethernet/sfc/ethtool.c
@@ -690,21 +690,27 @@ static int efx_ethtool_set_ringparam(struct net_device *net_dev,
 				     struct ethtool_ringparam *ring)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
+	u32 txq_entries;
 
 	if (ring->rx_mini_pending || ring->rx_jumbo_pending ||
 	    ring->rx_pending > EFX_MAX_DMAQ_SIZE ||
 	    ring->tx_pending > EFX_MAX_DMAQ_SIZE)
 		return -EINVAL;
 
-	if (ring->rx_pending < EFX_MIN_RING_SIZE ||
-	    ring->tx_pending < EFX_MIN_RING_SIZE) {
+	if (ring->rx_pending < EFX_RXQ_MIN_ENT) {
 		netif_err(efx, drv, efx->net_dev,
-			  "TX and RX queues cannot be smaller than %ld\n",
-			  EFX_MIN_RING_SIZE);
+			  "RX queues cannot be smaller than %u\n",
+			  EFX_RXQ_MIN_ENT);
 		return -EINVAL;
 	}
 
-	return efx_realloc_channels(efx, ring->rx_pending, ring->tx_pending);
+	txq_entries = max(ring->tx_pending, EFX_TXQ_MIN_ENT(efx));
+	if (txq_entries != ring->tx_pending)
+		netif_warn(efx, drv, efx->net_dev,
+			   "increasing TX queue size to minimum of %u\n",
+			   txq_entries);
+
+	return efx_realloc_channels(efx, ring->rx_pending, txq_entries);
 }
 
 static int efx_ethtool_set_pauseparam(struct net_device *net_dev,
diff --git a/drivers/net/ethernet/sfc/nic.h b/drivers/net/ethernet/sfc/nic.h
index 5fb24d3..66ece48 100644
--- a/drivers/net/ethernet/sfc/nic.h
+++ b/drivers/net/ethernet/sfc/nic.h
@@ -65,6 +65,9 @@ enum {
 #define FALCON_GMAC_LOOPBACKS			\
 	(1 << LOOPBACK_GMAC)
 
+/* Alignment of PCIe DMA boundaries (4KB) */
+#define EFX_PAGE_SIZE	4096
+
 /**
  * struct falcon_board_type - board operations and type information
  * @id: Board type id, as found in NVRAM
diff --git a/drivers/net/ethernet/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c
index df88c543..807d515 100644
--- a/drivers/net/ethernet/sfc/tx.c
+++ b/drivers/net/ethernet/sfc/tx.c
@@ -115,6 +115,25 @@ efx_max_tx_len(struct efx_nic *efx, dma_addr_t dma_addr)
 	return len;
 }
 
+unsigned int efx_tx_max_skb_descs(struct efx_nic *efx)
+{
+	/* Header and payload descriptor for each output segment, plus
+	 * one for every input fragment boundary within a segment
+	 */
+	unsigned int max_descs = EFX_TSO_MAX_SEGS * 2 + MAX_SKB_FRAGS;
+
+	/* Possibly one more per segment for the alignment workaround */
+	if (EFX_WORKAROUND_5391(efx))
+		max_descs += EFX_TSO_MAX_SEGS;
+
+	/* Possibly more for PCIe page boundaries within input fragments */
+	if (PAGE_SIZE > EFX_PAGE_SIZE)
+		max_descs += max_t(unsigned int, MAX_SKB_FRAGS,
+				   DIV_ROUND_UP(GSO_MAX_SIZE, EFX_PAGE_SIZE));
+
+	return max_descs;
+}
+
 /*
  * Add a socket buffer to a TX queue
  *
diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c
index f8a6853..ad6a9d9 100644
--- a/drivers/net/ppp/pptp.c
+++ b/drivers/net/ppp/pptp.c
@@ -189,7 +189,7 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 	if (sk_pppox(po)->sk_state & PPPOX_DEAD)
 		goto tx_error;
 
-	rt = ip_route_output_ports(&init_net, &fl4, NULL,
+	rt = ip_route_output_ports(sock_net(sk), &fl4, NULL,
 				   opt->dst_addr.sin_addr.s_addr,
 				   opt->src_addr.sin_addr.s_addr,
 				   0, 0, IPPROTO_GRE,
@@ -468,7 +468,7 @@ static int pptp_connect(struct socket *sock, struct sockaddr *uservaddr,
 	po->chan.private = sk;
 	po->chan.ops = &pptp_chan_ops;
 
-	rt = ip_route_output_ports(&init_net, &fl4, sk,
+	rt = ip_route_output_ports(sock_net(sk), &fl4, sk,
 				   opt->dst_addr.sin_addr.s_addr,
 				   opt->src_addr.sin_addr.s_addr,
 				   0, 0,
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index a1670e3..93e6179 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -232,6 +232,9 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file,
 	struct iwl_priv *priv = file->private_data;
 	size_t bufsz;
 
+	if (!iwl_is_ready_rf(priv->shrd))
+		return -EAGAIN;
+
 	/* default is to dump the entire data segment */
 	if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) {
 		priv->dbgfs_sram_offset = 0x800000;
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h
index 5c29281..8533ba2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h
@@ -303,7 +303,7 @@ int iwl_queue_space(const struct iwl_queue *q);
 ******************************************************/
 int iwl_dump_nic_event_log(struct iwl_trans *trans, bool full_log,
 			    char **buf, bool display);
-int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display);
+int iwl_dump_fh(struct iwl_trans *trans, char **buf);
 void iwl_dump_csr(struct iwl_trans *trans);
 
 /*****************************************************
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
index 1daf01e..17fb25d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
@@ -678,7 +678,7 @@ static void iwl_irq_handle_error(struct iwl_trans *trans)
 
 	iwl_dump_nic_error_log(trans);
 	iwl_dump_csr(trans);
-	iwl_dump_fh(trans, NULL, false);
+	iwl_dump_fh(trans, NULL);
 	iwl_dump_nic_event_log(trans, false, NULL, false);
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (iwl_get_debug_level(trans->shrd) & IWL_DL_FW_ERRORS)
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index 4661a64..75da4bc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -1541,13 +1541,9 @@ static const char *get_fh_string(int cmd)
 	}
 }
 
-int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display)
+int iwl_dump_fh(struct iwl_trans *trans, char **buf)
 {
 	int i;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	int pos = 0;
-	size_t bufsz = 0;
-#endif
 	static const u32 fh_tbl[] = {
 		FH_RSCSR_CHNL0_STTS_WPTR_REG,
 		FH_RSCSR_CHNL0_RBDCB_BASE_REG,
@@ -1559,29 +1555,35 @@ int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display)
 		FH_TSSR_TX_STATUS_REG,
 		FH_TSSR_TX_ERROR_REG
 	};
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (display) {
-		bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	if (buf) {
+		int pos = 0;
+		size_t bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+
 		*buf = kmalloc(bufsz, GFP_KERNEL);
 		if (!*buf)
 			return -ENOMEM;
+
 		pos += scnprintf(*buf + pos, bufsz - pos,
 				"FH register values:\n");
-		for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
+
+		for (i = 0; i < ARRAY_SIZE(fh_tbl); i++)
 			pos += scnprintf(*buf + pos, bufsz - pos,
 				"  %34s: 0X%08x\n",
 				get_fh_string(fh_tbl[i]),
 				iwl_read_direct32(bus(trans), fh_tbl[i]));
-		}
+
 		return pos;
 	}
 #endif
+
 	IWL_ERR(trans, "FH register values:\n");
-	for (i = 0; i <  ARRAY_SIZE(fh_tbl); i++) {
+	for (i = 0; i <  ARRAY_SIZE(fh_tbl); i++)
 		IWL_ERR(trans, "  %34s: 0X%08x\n",
 			get_fh_string(fh_tbl[i]),
 			iwl_read_direct32(bus(trans), fh_tbl[i]));
-	}
+
 	return 0;
 }
 
@@ -1929,11 +1931,11 @@ static ssize_t iwl_dbgfs_fh_reg_read(struct file *file,
 					 size_t count, loff_t *ppos)
 {
 	struct iwl_trans *trans = file->private_data;
-	char *buf;
+	char *buf = NULL;
 	int pos = 0;
 	ssize_t ret = -EFAULT;
 
-	ret = pos = iwl_dump_fh(trans, &buf, true);
+	ret = pos = iwl_dump_fh(trans, &buf);
 	if (buf) {
 		ret = simple_read_from_buffer(user_buf,
 					      count, ppos, buf, pos);
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 3a6b402..0ea85f4 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1611,6 +1611,7 @@ static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -1624,6 +1625,14 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
+	rt2x00_set_field32(&reg, GPIOCSR_BIT8, 1);
+	rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt2400pci_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index d3a4a68..7564ae9 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -670,6 +670,7 @@
 #define GPIOCSR_BIT5			FIELD32(0x00000020)
 #define GPIOCSR_BIT6			FIELD32(0x00000040)
 #define GPIOCSR_BIT7			FIELD32(0x00000080)
+#define GPIOCSR_BIT8			FIELD32(0x00000100)
 
 /*
  * BBPPCSR: BBP Pin control register.
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index dcc0e1f..aa10c48 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1929,6 +1929,7 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -1942,6 +1943,14 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
+	rt2x00_set_field32(&reg, GPIOCSR_DIR0, 1);
+	rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt2500pci_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 53c5f87..22ed6df 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -283,7 +283,7 @@ static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 	u16 reg;
 
 	rt2500usb_register_read(rt2x00dev, MAC_CSR19, &reg);
-	return rt2x00_get_field32(reg, MAC_CSR19_BIT7);
+	return rt2x00_get_field16(reg, MAC_CSR19_BIT7);
 }
 
 #ifdef CONFIG_RT2X00_LIB_LEDS
@@ -1768,6 +1768,7 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u16 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -1781,6 +1782,14 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2500usb_register_read(rt2x00dev, MAC_CSR19, &reg);
+	rt2x00_set_field16(&reg, MAC_CSR19_BIT8, 0);
+	rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt2500usb_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index b493306..196bd51 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -189,14 +189,15 @@
  * MAC_CSR19: GPIO control register.
  */
 #define MAC_CSR19			0x0426
-#define MAC_CSR19_BIT0			FIELD32(0x0001)
-#define MAC_CSR19_BIT1			FIELD32(0x0002)
-#define MAC_CSR19_BIT2			FIELD32(0x0004)
-#define MAC_CSR19_BIT3			FIELD32(0x0008)
-#define MAC_CSR19_BIT4			FIELD32(0x0010)
-#define MAC_CSR19_BIT5			FIELD32(0x0020)
-#define MAC_CSR19_BIT6			FIELD32(0x0040)
-#define MAC_CSR19_BIT7			FIELD32(0x0080)
+#define MAC_CSR19_BIT0			FIELD16(0x0001)
+#define MAC_CSR19_BIT1			FIELD16(0x0002)
+#define MAC_CSR19_BIT2			FIELD16(0x0004)
+#define MAC_CSR19_BIT3			FIELD16(0x0008)
+#define MAC_CSR19_BIT4			FIELD16(0x0010)
+#define MAC_CSR19_BIT5			FIELD16(0x0020)
+#define MAC_CSR19_BIT6			FIELD16(0x0040)
+#define MAC_CSR19_BIT7			FIELD16(0x0080)
+#define MAC_CSR19_BIT8			FIELD16(0x0100)
 
 /*
  * MAC_CSR20: LED control register.
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 837b460..518157d 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -935,6 +935,7 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -948,6 +949,14 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+	rt2x00_set_field32(&reg, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+	rt2x00pci_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt2800_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index ae7528b..b66a61b 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -621,8 +621,16 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 	skb_pull(entry->skb, RXINFO_DESC_SIZE);
 
 	/*
-	 * FIXME: we need to check for rx_pkt_len validity
+	 * Check for rx_pkt_len validity. Return if invalid, leaving
+	 * rxdesc->size zeroed out by the upper level.
 	 */
+	if (unlikely(rx_pkt_len == 0 ||
+			rx_pkt_len > entry->queue->data_size)) {
+		ERROR(entry->queue->rt2x00dev,
+			"Bad frame size %d, forcing to 0\n", rx_pkt_len);
+		return;
+	}
+
 	rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
 
 	/*
@@ -690,6 +698,7 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -703,6 +712,14 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+	rt2x00_set_field32(&reg, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+	rt2x00usb_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt2800_probe_hw_mode(rt2x00dev);
@@ -1111,6 +1128,8 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x1690, 0x0744) },
 	{ USB_DEVICE(0x1690, 0x0761) },
 	{ USB_DEVICE(0x1690, 0x0764) },
+	/* ASUS */
+	{ USB_DEVICE(0x0b05, 0x179d) },
 	/* Cisco */
 	{ USB_DEVICE(0x167b, 0x4001) },
 	/* EnGenius */
@@ -1163,7 +1182,6 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x0b05, 0x1760) },
 	{ USB_DEVICE(0x0b05, 0x1761) },
 	{ USB_DEVICE(0x0b05, 0x1790) },
-	{ USB_DEVICE(0x0b05, 0x179d) },
 	/* AzureWave */
 	{ USB_DEVICE(0x13d3, 0x3262) },
 	{ USB_DEVICE(0x13d3, 0x3284) },
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 21b529b..f099b30 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -624,7 +624,7 @@ void rt2x00lib_rxdone(struct queue_entry *entry)
 	 */
 	if (unlikely(rxdesc.size == 0 ||
 		     rxdesc.size > entry->queue->data_size)) {
-		WARNING(rt2x00dev, "Wrong frame size %d max %d.\n",
+		ERROR(rt2x00dev, "Wrong frame size %d max %d.\n",
 			rxdesc.size, entry->queue->data_size);
 		dev_kfree_skb(entry->skb);
 		goto renew_skb;
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index d69f88c..3e058e5 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2832,6 +2832,7 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Disable power saving.
@@ -2850,6 +2851,14 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
+	rt2x00_set_field32(&reg, MAC_CSR13_BIT13, 1);
+	rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt61pci_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index e3cd6db..8f3da5a 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -372,6 +372,7 @@ struct hw_pairwise_ta_entry {
 #define MAC_CSR13_BIT10			FIELD32(0x00000400)
 #define MAC_CSR13_BIT11			FIELD32(0x00000800)
 #define MAC_CSR13_BIT12			FIELD32(0x00001000)
+#define MAC_CSR13_BIT13			FIELD32(0x00002000)
 
 /*
  * MAC_CSR14: LED control register.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index cfb19db..2ad468d 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2177,6 +2177,7 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -2190,6 +2191,14 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00usb_register_read(rt2x00dev, MAC_CSR13, &reg);
+	rt2x00_set_field32(&reg, MAC_CSR13_BIT15, 0);
+	rt2x00usb_register_write(rt2x00dev, MAC_CSR13, reg);
+
+	/*
 	 * Initialize hw specifications.
 	 */
 	retval = rt73usb_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 9f6b470..df1cc11 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -282,6 +282,9 @@ struct hw_pairwise_ta_entry {
 #define MAC_CSR13_BIT10			FIELD32(0x00000400)
 #define MAC_CSR13_BIT11			FIELD32(0x00000800)
 #define MAC_CSR13_BIT12			FIELD32(0x00001000)
+#define MAC_CSR13_BIT13			FIELD32(0x00002000)
+#define MAC_CSR13_BIT14			FIELD32(0x00004000)
+#define MAC_CSR13_BIT15			FIELD32(0x00008000)
 
 /*
  * MAC_CSR14: LED control register.
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 29a994f..7c471eb 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -4125,7 +4125,6 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	spin_lock_init(&instance->cmd_pool_lock);
 	spin_lock_init(&instance->hba_lock);
 	spin_lock_init(&instance->completion_lock);
-	spin_lock_init(&poll_aen_lock);
 
 	mutex_init(&instance->aen_mutex);
 	mutex_init(&instance->reset_mutex);
@@ -5520,6 +5519,8 @@ static int __init megasas_init(void)
 	printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION,
 	       MEGASAS_EXT_VERSION);
 
+	spin_lock_init(&poll_aen_lock);
+
 	support_poll_for_event = 2;
 	support_device_change = 1;
 
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index e903077..98cb5e6 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -2353,10 +2353,13 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	}
 
 	/* command line tunables  for max controller queue depth */
-	if (max_queue_depth != -1)
-		max_request_credit = (max_queue_depth < facts->RequestCredit)
-		    ? max_queue_depth : facts->RequestCredit;
-	else
+	if (max_queue_depth != -1 && max_queue_depth != 0) {
+		max_request_credit = min_t(u16, max_queue_depth +
+			ioc->hi_priority_depth + ioc->internal_depth,
+			facts->RequestCredit);
+		if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
+			max_request_credit =  MAX_HBA_QUEUE_DEPTH;
+	} else
 		max_request_credit = min_t(u16, facts->RequestCredit,
 		    MAX_HBA_QUEUE_DEPTH);
 
@@ -2431,7 +2434,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	/* set the scsi host can_queue depth
 	 * with some internal commands that could be outstanding
 	 */
-	ioc->shost->can_queue = ioc->scsiio_depth - (2);
+	ioc->shost->can_queue = ioc->scsiio_depth;
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
 	    "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));
 
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 456b131..c83571e 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -41,6 +41,8 @@
 
 #include <trace/events/scsi.h>
 
+static void scsi_eh_done(struct scsi_cmnd *scmd);
+
 #define SENSE_TIMEOUT		(10*HZ)
 
 /*
@@ -240,6 +242,14 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 	if (! scsi_command_normalize_sense(scmd, &sshdr))
 		return FAILED;	/* no valid sense data */
 
+	if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
+		/*
+		 * nasty: for mid-layer issued TURs, we need to return the
+		 * actual sense data without any recovery attempt.  For eh
+		 * issued ones, we need to try to recover and interpret
+		 */
+		return SUCCESS;
+
 	if (scsi_sense_is_deferred(&sshdr))
 		return NEEDS_RETRY;
 
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index a48b59c..c6c80c9 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -776,6 +776,16 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 	sdev->model = (char *) (sdev->inquiry + 16);
 	sdev->rev = (char *) (sdev->inquiry + 32);
 
+	if (strncmp(sdev->vendor, "ATA     ", 8) == 0) {
+		/*
+		 * sata emulation layer device.  This is a hack to work around
+		 * the SATL power management specifications which state that
+		 * when the SATL detects the device has gone into standby
+		 * mode, it shall respond with NOT READY.
+		 */
+		sdev->allow_restart = 1;
+	}
+
 	if (*bflags & BLIST_ISROM) {
 		sdev->type = TYPE_ROM;
 		sdev->removable = 1;
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index 3141dc8..a48fe88 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -385,7 +385,7 @@ static const struct das08_board_struct das08_boards[] = {
 	 .ai = das08_ai_rinsn,
 	 .ai_nbits = 16,
 	 .ai_pg = das08_pg_none,
-	 .ai_encoding = das08_encode12,
+	 .ai_encoding = das08_encode16,
 	 .ao = das08jr_ao_winsn,
 	 .ao_nbits = 16,
 	 .di = das08jr_di_rbits,
@@ -655,7 +655,7 @@ static int das08jr_ao_winsn(struct comedi_device *dev,
 	int chan;
 
 	lsb = data[0] & 0xff;
-	msb = (data[0] >> 8) & 0xf;
+	msb = (data[0] >> 8) & 0xff;
 
 	chan = CR_CHAN(insn->chanspec);
 
diff --git a/drivers/staging/rtl8712/recv_linux.c b/drivers/staging/rtl8712/recv_linux.c
index 0e26d5f..495ee12 100644
--- a/drivers/staging/rtl8712/recv_linux.c
+++ b/drivers/staging/rtl8712/recv_linux.c
@@ -117,13 +117,8 @@ void r8712_recv_indicatepkt(struct _adapter *padapter,
 	if (skb == NULL)
 		goto _recv_indicatepkt_drop;
 	skb->data = precv_frame->u.hdr.rx_data;
-#ifdef NET_SKBUFF_DATA_USES_OFFSET
-	skb->tail = (sk_buff_data_t)(precv_frame->u.hdr.rx_tail -
-		     precv_frame->u.hdr.rx_head);
-#else
-	skb->tail = (sk_buff_data_t)precv_frame->u.hdr.rx_tail;
-#endif
 	skb->len = precv_frame->u.hdr.len;
+	skb_set_tail_pointer(skb, skb->len);
 	if ((pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 	else
diff --git a/drivers/staging/vt6656/dpc.c b/drivers/staging/vt6656/dpc.c
index c0edf97..08021f4 100644
--- a/drivers/staging/vt6656/dpc.c
+++ b/drivers/staging/vt6656/dpc.c
@@ -200,7 +200,7 @@ s_vProcessRxMACHeader (
     } else if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
         cbHeaderSize += 6;
         pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
-	if ((*pwType == cpu_to_le16(ETH_P_IPX)) ||
+	if ((*pwType == cpu_to_be16(ETH_P_IPX)) ||
 	    (*pwType == cpu_to_le16(0xF380))) {
 		cbHeaderSize -= 8;
             pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index 9b64b10..fe21868 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -1701,7 +1701,7 @@ s_bPacketToWirelessUsb(
     // 802.1H
     if (ntohs(psEthHeader->wType) > ETH_DATA_LEN) {
 	if (pDevice->dwDiagRefCount == 0) {
-		if ((psEthHeader->wType == cpu_to_le16(ETH_P_IPX)) ||
+		if ((psEthHeader->wType == cpu_to_be16(ETH_P_IPX)) ||
 		    (psEthHeader->wType == cpu_to_le16(0xF380))) {
 			memcpy((PBYTE) (pbyPayloadHead),
 			       abySNAP_Bridgetunnel, 6);
@@ -2840,10 +2840,10 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
     Packet_Type = skb->data[ETH_HLEN+1];
     Descriptor_type = skb->data[ETH_HLEN+1+1+2];
     Key_info = (skb->data[ETH_HLEN+1+1+2+1] << 8)|(skb->data[ETH_HLEN+1+1+2+2]);
-    if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) {
-	/* 802.1x OR eapol-key challenge frame transfer */
-	if (((Protocol_Version == 1) || (Protocol_Version == 2)) &&
-		(Packet_Type == 3)) {
+	if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) {
+		/* 802.1x OR eapol-key challenge frame transfer */
+		if (((Protocol_Version == 1) || (Protocol_Version == 2)) &&
+			(Packet_Type == 3)) {
                         bTxeapol_key = TRUE;
                        if(!(Key_info & BIT3) &&  //WPA or RSN group-key challenge
 			   (Key_info & BIT8) && (Key_info & BIT9)) {    //send 2/2 key
@@ -2989,19 +2989,19 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
         }
     }
 
-    if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) {
-        if (pDevice->byBBType != BB_TYPE_11A) {
-            pDevice->wCurrentRate = RATE_1M;
-            pDevice->byACKRate = RATE_1M;
-            pDevice->byTopCCKBasicRate = RATE_1M;
-            pDevice->byTopOFDMBasicRate = RATE_6M;
-        } else {
-            pDevice->wCurrentRate = RATE_6M;
-            pDevice->byACKRate = RATE_6M;
-            pDevice->byTopCCKBasicRate = RATE_1M;
-            pDevice->byTopOFDMBasicRate = RATE_6M;
-        }
-    }
+	if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) {
+		if (pDevice->byBBType != BB_TYPE_11A) {
+			pDevice->wCurrentRate = RATE_1M;
+			pDevice->byACKRate = RATE_1M;
+			pDevice->byTopCCKBasicRate = RATE_1M;
+			pDevice->byTopOFDMBasicRate = RATE_6M;
+		} else {
+			pDevice->wCurrentRate = RATE_6M;
+			pDevice->byACKRate = RATE_6M;
+			pDevice->byTopCCKBasicRate = RATE_1M;
+			pDevice->byTopOFDMBasicRate = RATE_6M;
+		}
+	}
 
     DBG_PRT(MSG_LEVEL_DEBUG,
 	    KERN_INFO "dma_tx: pDevice->wCurrentRate = %d\n",
@@ -3017,7 +3017,7 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
 
     if (bNeedEncryption == TRUE) {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ntohs Pkt Type=%04x\n", ntohs(pDevice->sTxEthHeader.wType));
-	if ((pDevice->sTxEthHeader.wType) == cpu_to_le16(ETH_P_PAE)) {
+	if ((pDevice->sTxEthHeader.wType) == cpu_to_be16(ETH_P_PAE)) {
 		bNeedEncryption = FALSE;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Pkt Type=%04x\n", (pDevice->sTxEthHeader.wType));
             if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c
index 16ad9fe..4306475 100644
--- a/drivers/staging/zcache/zcache-main.c
+++ b/drivers/staging/zcache/zcache-main.c
@@ -1223,13 +1223,12 @@ static int zcache_pampd_get_data_and_free(char *data, size_t *bufsize, bool raw,
 					void *pampd, struct tmem_pool *pool,
 					struct tmem_oid *oid, uint32_t index)
 {
-	int ret = 0;
-
 	BUG_ON(!is_ephemeral(pool));
-	zbud_decompress((struct page *)(data), pampd);
+	if (zbud_decompress((struct page *)(data), pampd) < 0)
+		return -EINVAL;
 	zbud_free_and_delist((struct zbud_hdr *)pampd);
 	atomic_dec(&zcache_curr_eph_pampd_count);
-	return ret;
+	return 0;
 }
 
 /*
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 163fc90..8e68f79 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -130,6 +130,7 @@
 #define  UCR4_OREN  	 (1<<1)  /* Receiver overrun interrupt enable */
 #define  UCR4_DREN  	 (1<<0)  /* Recv data ready interrupt enable */
 #define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
+#define  UFCR_DCEDTE	 (1<<6)  /* DCE/DTE mode select */
 #define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
 #define  UFCR_RFDIV_REG(x)	(((x) < 7 ? 6 - (x) : 6) << 7)
 #define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
@@ -635,22 +636,11 @@ static void imx_break_ctl(struct uart_port *port, int break_state)
 static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 {
 	unsigned int val;
-	unsigned int ufcr_rfdiv;
-
-	/* set receiver / transmitter trigger level.
-	 * RFDIV is set such way to satisfy requested uartclk value
-	 */
-	val = TXTL << 10 | RXTL;
-	ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
-			/ sport->port.uartclk;
-
-	if(!ufcr_rfdiv)
-		ufcr_rfdiv = 1;
-
-	val |= UFCR_RFDIV_REG(ufcr_rfdiv);
 
+	/* set receiver / transmitter trigger level */
+	val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
+	val |= TXTL << UFCR_TXTL_SHF | RXTL;
 	writel(val, sport->port.membase + UFCR);
-
 	return 0;
 }
 
@@ -725,6 +715,7 @@ static int imx_startup(struct uart_port *port)
 		}
 	}
 
+	spin_lock_irqsave(&sport->port.lock, flags);
 	/*
 	 * Finally, clear and enable interrupts
 	 */
@@ -778,7 +769,6 @@ static int imx_startup(struct uart_port *port)
 	/*
 	 * Enable modem status interrupts
 	 */
-	spin_lock_irqsave(&sport->port.lock,flags);
 	imx_enable_ms(&sport->port);
 	spin_unlock_irqrestore(&sport->port.lock,flags);
 
@@ -808,10 +798,13 @@ static void imx_shutdown(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
+	unsigned long flags;
 
+	spin_lock_irqsave(&sport->port.lock, flags);
 	temp = readl(sport->port.membase + UCR2);
 	temp &= ~(UCR2_TXEN);
 	writel(temp, sport->port.membase + UCR2);
+	spin_unlock_irqrestore(&sport->port.lock, flags);
 
 	if (USE_IRDA(sport)) {
 		struct imxuart_platform_data *pdata;
@@ -840,12 +833,14 @@ static void imx_shutdown(struct uart_port *port)
 	 * Disable all interrupts, port and break condition.
 	 */
 
+	spin_lock_irqsave(&sport->port.lock, flags);
 	temp = readl(sport->port.membase + UCR1);
 	temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
 	if (USE_IRDA(sport))
 		temp &= ~(UCR1_IREN);
 
 	writel(temp, sport->port.membase + UCR1);
+	spin_unlock_irqrestore(&sport->port.lock, flags);
 }
 
 static void
@@ -1119,6 +1114,9 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
 {
 	struct imx_port *sport = imx_ports[co->index];
 	unsigned int old_ucr1, old_ucr2, ucr1;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sport->port.lock, flags);
 
 	/*
 	 *	First, save UCR1/2 and then disable interrupts
@@ -1145,6 +1143,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
 
 	writel(old_ucr1, sport->port.membase + UCR1);
 	writel(old_ucr2, sport->port.membase + UCR2);
+
+	spin_unlock_irqrestore(&sport->port.lock, flags);
 }
 
 /*
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 32d3adc..8b2a9d8 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -96,6 +96,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Microchip Joss Optical infrared touchboard device */
+	{ USB_DEVICE(0x04d8, 0x000c), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* Samsung Android phone modem - ID conflict with SPH-I500 */
 	{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index fef1db3..2023733 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -128,9 +128,17 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	else {
 		qtd = list_entry (qh->qtd_list.next,
 				struct ehci_qtd, qtd_list);
-		/* first qtd may already be partially processed */
-		if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current)
+		/*
+		 * first qtd may already be partially processed.
+		 * If we come here during unlink, the QH overlay region
+		 * might have reference to the just unlinked qtd. The
+		 * qtd is updated in qh_completions(). Update the QH
+		 * overlay here.
+		 */
+		if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+			qh->hw->hw_qtd_next = qtd->hw_next;
 			qtd = NULL;
+		}
 	}
 
 	if (qtd)
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 833b3c6..d0ec2f0 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -75,7 +75,9 @@
 #define	NB_PIF0_PWRDOWN_1	0x01100013
 
 #define USB_INTEL_XUSB2PR      0xD0
+#define USB_INTEL_USB2PRM      0xD4
 #define USB_INTEL_USB3_PSSEN   0xD8
+#define USB_INTEL_USB3PRM      0xDC
 
 static struct amd_chipset_info {
 	struct pci_dev	*nb_dev;
@@ -772,10 +774,18 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 		return;
 	}
 
-	ports_available = 0xffffffff;
+	/* Read USB3PRM, the USB 3.0 Port Routing Mask Register
+	 * Indicate the ports that can be changed from OS.
+	 */
+	pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
+			&ports_available);
+
+	dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
+			ports_available);
+
 	/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
-	 * Register, to turn on SuperSpeed terminations for all
-	 * available ports.
+	 * Register, to turn on SuperSpeed terminations for the
+	 * switchable ports.
 	 */
 	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
 			cpu_to_le32(ports_available));
@@ -785,7 +795,16 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 	dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
 			"under xHCI: 0x%x\n", ports_available);
 
-	ports_available = 0xffffffff;
+	/* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
+	 * Indicate the USB 2.0 ports to be controlled by the xHCI host.
+	 */
+
+	pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
+			&ports_available);
+
+	dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
+			ports_available);
+
 	/* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
 	 * switch the USB 2.0 power and data lines over to the xHCI
 	 * host.
@@ -800,6 +819,13 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 }
 EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
 
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
+{
+	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
+	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
+}
+EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
+
 /**
  * PCI Quirks for xHCI.
  *
@@ -815,12 +841,12 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 	void __iomem *op_reg_base;
 	u32 val;
 	int timeout;
+	int len = pci_resource_len(pdev, 0);
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
 
-	base = ioremap_nocache(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0));
+	base = ioremap_nocache(pci_resource_start(pdev, 0), len);
 	if (base == NULL)
 		return;
 
@@ -830,9 +856,17 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 	 */
 	ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
 	do {
+		if ((ext_cap_offset + sizeof(val)) > len) {
+			/* We're reading garbage from the controller */
+			dev_warn(&pdev->dev,
+				 "xHCI controller failing to respond");
+			return;
+		}
+
 		if (!ext_cap_offset)
 			/* We've reached the end of the extended capabilities */
 			goto hc_init;
+
 		val = readl(base + ext_cap_offset);
 		if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
 			break;
@@ -863,9 +897,10 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 	/* Disable any BIOS SMIs and clear all SMI events*/
 	writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
 
+hc_init:
 	if (usb_is_intel_switchable_xhci(pdev))
 		usb_enable_xhci_ports(pdev);
-hc_init:
+
 	op_reg_base = base + XHCI_HC_LENGTH(readl(base));
 
 	/* Wait for the host controller to be ready before writing any
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index b1002a8..7f69a39 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -10,10 +10,12 @@ void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
 bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
 void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 #else
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
 static inline void usb_amd_dev_put(void) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 #endif  /* CONFIG_PCI */
 
 #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fd8a2c2..978860b 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -469,11 +469,48 @@ static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
 		 * when this bit is set.
 		 */
 		pls |= USB_PORT_STAT_CONNECTION;
+	} else {
+		/*
+		 * If CAS bit isn't set but the Port is already at
+		 * Compliance Mode, fake a connection so the USB core
+		 * notices the Compliance state and resets the port.
+		 * This resolves an issue generated by the SN65LVPE502CP
+		 * in which sometimes the port enters compliance mode
+		 * caused by a delay on the host-device negotiation.
+		 */
+		if (pls == USB_SS_PORT_LS_COMP_MOD)
+			pls |= USB_PORT_STAT_CONNECTION;
 	}
+
 	/* update status field */
 	*status |= pls;
 }
 
+/*
+ * Function for Compliance Mode Quirk.
+ *
+ * This Function verifies if all xhc USB3 ports have entered U0, if so,
+ * the compliance mode timer is deleted. A port won't enter
+ * compliance mode if it has previously entered U0.
+ */
+void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
+{
+	u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1);
+	bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
+
+	if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+		return;
+
+	if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
+		xhci->port_status_u0 |= 1 << wIndex;
+		if (xhci->port_status_u0 == all_ports_seen_u0) {
+			del_timer_sync(&xhci->comp_mode_recovery_timer);
+			xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n");
+			xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n");
+		}
+	}
+}
+
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		u16 wIndex, char *buf, u16 wLength)
 {
@@ -618,6 +655,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		/* Update Port Link State for super speed ports*/
 		if (hcd->speed == HCD_USB3) {
 			xhci_hub_report_link_state(&status, temp);
+			/*
+			 * Verify if all USB3 Ports Have entered U0 already.
+			 * Delete Compliance Mode Timer if so.
+			 */
+			xhci_del_comp_mod_timer(xhci, temp, wIndex);
 		}
 		if (bus_state->port_c_suspend & (1 << wIndex))
 			status |= 1 << USB_PORT_FEAT_C_SUSPEND;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 07c72a4..bddcbfc 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -90,6 +90,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
 		xhci->quirks |= XHCI_SW_BW_CHECKING;
+		/*
+		 * PPT desktop boards DH77EB and DH77DF will power back on after
+		 * a few seconds of being shutdown.  The fix for this is to
+		 * switch the ports from xHCI to EHCI on shutdown.  We can't use
+		 * DMI information to find those particular boards (since each
+		 * vendor will change the board name), so we have to key off all
+		 * PPT chipsets.
+		 */
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index fb0981e..c7c530c 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -145,25 +145,34 @@ static void next_trb(struct xhci_hcd *xhci,
  */
 static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
 {
-	union xhci_trb *next = ++(ring->dequeue);
 	unsigned long long addr;
 
 	ring->deq_updates++;
-	/* Update the dequeue pointer further if that was a link TRB or we're at
-	 * the end of an event ring segment (which doesn't have link TRBS)
-	 */
-	while (last_trb(xhci, ring, ring->deq_seg, next)) {
-		if (consumer && last_trb_on_last_seg(xhci, ring, ring->deq_seg, next)) {
-			ring->cycle_state = (ring->cycle_state ? 0 : 1);
-			if (!in_interrupt())
-				xhci_dbg(xhci, "Toggle cycle state for ring %p = %i\n",
-						ring,
-						(unsigned int) ring->cycle_state);
+
+	do {
+		/*
+		 * Update the dequeue pointer further if that was a link TRB or
+		 * we're at the end of an event ring segment (which doesn't have
+		 * link TRBS)
+		 */
+		if (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) {
+			if (consumer && last_trb_on_last_seg(xhci, ring,
+						ring->deq_seg, ring->dequeue)) {
+				if (!in_interrupt())
+					xhci_dbg(xhci, "Toggle cycle state "
+							"for ring %p = %i\n",
+							ring,
+							(unsigned int)
+							ring->cycle_state);
+				ring->cycle_state = (ring->cycle_state ? 0 : 1);
+			}
+			ring->deq_seg = ring->deq_seg->next;
+			ring->dequeue = ring->deq_seg->trbs;
+		} else {
+			ring->dequeue++;
 		}
-		ring->deq_seg = ring->deq_seg->next;
-		ring->dequeue = ring->deq_seg->trbs;
-		next = ring->dequeue;
-	}
+	} while (last_trb(xhci, ring, ring->deq_seg, ring->dequeue));
+
 	addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
 }
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f7c0a2a..09872ee 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
+#include <linux/dmi.h>
 
 #include "xhci.h"
 
@@ -387,6 +388,95 @@ static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
 
 #endif
 
+static void compliance_mode_recovery(unsigned long arg)
+{
+	struct xhci_hcd *xhci;
+	struct usb_hcd *hcd;
+	u32 temp;
+	int i;
+
+	xhci = (struct xhci_hcd *)arg;
+
+	for (i = 0; i < xhci->num_usb3_ports; i++) {
+		temp = xhci_readl(xhci, xhci->usb3_ports[i]);
+		if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+			/*
+			 * Compliance Mode Detected. Letting USB Core
+			 * handle the Warm Reset
+			 */
+			xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n",
+					i + 1);
+			xhci_dbg(xhci, "Attempting Recovery routine!\n");
+			hcd = xhci->shared_hcd;
+
+			if (hcd->state == HC_STATE_SUSPENDED)
+				usb_hcd_resume_root_hub(hcd);
+
+			usb_hcd_poll_rh_status(hcd);
+		}
+	}
+
+	if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1))
+		mod_timer(&xhci->comp_mode_recovery_timer,
+			jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+/*
+ * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver
+ * that causes ports behind that hardware to enter compliance mode sometimes.
+ * The quirk creates a timer that polls every 2 seconds the link state of
+ * each host controller's port and recovers it by issuing a Warm reset
+ * if Compliance mode is detected, otherwise the port will become "dead" (no
+ * device connections or disconnections will be detected anymore). Becasue no
+ * status event is generated when entering compliance mode (per xhci spec),
+ * this quirk is needed on systems that have the failing hardware installed.
+ */
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+	xhci->port_status_u0 = 0;
+	init_timer(&xhci->comp_mode_recovery_timer);
+
+	xhci->comp_mode_recovery_timer.data = (unsigned long) xhci;
+	xhci->comp_mode_recovery_timer.function = compliance_mode_recovery;
+	xhci->comp_mode_recovery_timer.expires = jiffies +
+			msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+
+	set_timer_slack(&xhci->comp_mode_recovery_timer,
+			msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+	add_timer(&xhci->comp_mode_recovery_timer);
+	xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n");
+}
+
+/*
+ * This function identifies the systems that have installed the SN65LVPE502CP
+ * USB3.0 re-driver and that need the Compliance Mode Quirk.
+ * Systems:
+ * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
+ */
+static bool compliance_mode_recovery_timer_quirk_check(void)
+{
+	const char *dmi_product_name, *dmi_sys_vendor;
+
+	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+
+	if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
+		return false;
+
+	if (strstr(dmi_product_name, "Z420") ||
+			strstr(dmi_product_name, "Z620") ||
+			strstr(dmi_product_name, "Z820"))
+		return true;
+
+	return false;
+}
+
+static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
+{
+	return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1));
+}
+
+
 /*
  * Initialize memory for HCD and xHC (one-time init).
  *
@@ -410,6 +500,12 @@ int xhci_init(struct usb_hcd *hcd)
 	retval = xhci_mem_init(xhci, GFP_KERNEL);
 	xhci_dbg(xhci, "Finished xhci_init\n");
 
+	/* Initializing Compliance Mode Recovery Data If Needed */
+	if (compliance_mode_recovery_timer_quirk_check()) {
+		xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+		compliance_mode_recovery_timer_init(xhci);
+	}
+
 	return retval;
 }
 
@@ -618,6 +714,11 @@ void xhci_stop(struct usb_hcd *hcd)
 	del_timer_sync(&xhci->event_ring_timer);
 #endif
 
+	/* Deleting Compliance Mode Recovery Timer */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+			(!(xhci_all_ports_seen_u0(xhci))))
+		del_timer_sync(&xhci->comp_mode_recovery_timer);
+
 	if (xhci->quirks & XHCI_AMD_PLL_FIX)
 		usb_amd_dev_put();
 
@@ -648,6 +749,9 @@ void xhci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
+	if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
+		usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
+
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
 	spin_unlock_irq(&xhci->lock);
@@ -791,6 +895,16 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	}
 	spin_unlock_irq(&xhci->lock);
 
+	/*
+	 * Deleting Compliance Mode Recovery Timer because the xHCI Host
+	 * is about to be suspended.
+	 */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+			(!(xhci_all_ports_seen_u0(xhci)))) {
+		del_timer_sync(&xhci->comp_mode_recovery_timer);
+		xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n");
+	}
+
 	/* step 5: remove core well power */
 	/* synchronize irq when using MSI-X */
 	xhci_msix_sync_irqs(xhci);
@@ -923,6 +1037,16 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		usb_hcd_resume_root_hub(hcd);
 		usb_hcd_resume_root_hub(xhci->shared_hcd);
 	}
+
+	/*
+	 * If system is subject to the Quirk, Compliance Mode Timer needs to
+	 * be re-initialized Always after a system resume. Ports are subject
+	 * to suffer the Compliance Mode issue again. It doesn't matter if
+	 * ports have entered previously to U0 before system's suspension.
+	 */
+	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+		compliance_mode_recovery_timer_init(xhci);
+
 	return retval;
 }
 #endif	/* CONFIG_PM */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7a56805..44d518a 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1471,6 +1471,8 @@ struct xhci_hcd {
 #define	XHCI_SW_BW_CHECKING	(1 << 8)
 #define XHCI_AMD_0x96_HOST	(1 << 9)
 #define XHCI_TRUST_TX_LENGTH	(1 << 10)
+#define XHCI_SPURIOUS_REBOOT	(1 << 13)
+#define XHCI_COMP_MODE_QUIRK	(1 << 14)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
@@ -1487,6 +1489,11 @@ struct xhci_hcd {
 	unsigned		sw_lpm_support:1;
 	/* support xHCI 1.0 spec USB2 hardware LPM */
 	unsigned		hw_lpm_support:1;
+	/* Compliance Mode Recovery Data */
+	struct timer_list	comp_mode_recovery_timer;
+	u32    			port_status_u0;
+/* Compliance Mode Timer Triggered every 2 seconds */
+#define COMP_MODE_RCVRY_MSECS 2000
 };
 
 /* convert between an HCD pointer and the corresponding EHCI_HCD */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b3182bb..7324bea 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -704,6 +704,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) },
 	{ USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
 	{ USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
 	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
@@ -804,13 +805,32 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
+					USB_CLASS_VENDOR_SPEC,
+					USB_SUBCLASS_VENDOR_SPEC, 0x00) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
 	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+	{ USB_DEVICE(FTDI_VID, PI_C865_PID) },
+	{ USB_DEVICE(FTDI_VID, PI_C857_PID) },
+	{ USB_DEVICE(PI_VID, PI_C866_PID) },
+	{ USB_DEVICE(PI_VID, PI_C663_PID) },
+	{ USB_DEVICE(PI_VID, PI_C725_PID) },
+	{ USB_DEVICE(PI_VID, PI_E517_PID) },
+	{ USB_DEVICE(PI_VID, PI_C863_PID) },
 	{ USB_DEVICE(PI_VID, PI_E861_PID) },
+	{ USB_DEVICE(PI_VID, PI_C867_PID) },
+	{ USB_DEVICE(PI_VID, PI_E609_PID) },
+	{ USB_DEVICE(PI_VID, PI_E709_PID) },
+	{ USB_DEVICE(PI_VID, PI_100F_PID) },
+	{ USB_DEVICE(PI_VID, PI_1011_PID) },
+	{ USB_DEVICE(PI_VID, PI_1012_PID) },
+	{ USB_DEVICE(PI_VID, PI_1013_PID) },
+	{ USB_DEVICE(PI_VID, PI_1014_PID) },
+	{ USB_DEVICE(PI_VID, PI_1015_PID) },
+	{ USB_DEVICE(PI_VID, PI_1016_PID) },
 	{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 54b4258..06f6fd2 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -75,6 +75,9 @@
 #define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
 #define FTDI_OPENDCC_GBM_PID	0xBFDC
 
+/* NZR SEM 16+ USB (http://www.nzr.de) */
+#define FTDI_NZR_SEM_USB_PID	0xC1E0	/* NZR SEM-LOG16+ */
+
 /*
  * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
  */
@@ -539,7 +542,10 @@
 /*
  * Microchip Technology, Inc.
  *
- * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by:
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are
+ * used by single function CDC ACM class based firmware demo
+ * applications.  The VID/PID has also been used in firmware
+ * emulating FTDI serial chips by:
  * Hornby Elite - Digital Command Control Console
  * http://www.hornby.com/hornby-dcc/controllers/
  */
@@ -791,8 +797,27 @@
  * Physik Instrumente
  * http://www.physikinstrumente.com/en/products/
  */
+/* These two devices use the VID of FTDI */
+#define PI_C865_PID	0xe0a0  /* PI C-865 Piezomotor Controller */
+#define PI_C857_PID	0xe0a1  /* PI Encoder Trigger Box */
+
 #define PI_VID              0x1a72  /* Vendor ID */
-#define PI_E861_PID         0x1008  /* E-861 piezo controller USB connection */
+#define PI_C866_PID	0x1000  /* PI C-866 Piezomotor Controller */
+#define PI_C663_PID	0x1001  /* PI C-663 Mercury-Step */
+#define PI_C725_PID	0x1002  /* PI C-725 Piezomotor Controller */
+#define PI_E517_PID	0x1005  /* PI E-517 Digital Piezo Controller Operation Module */
+#define PI_C863_PID	0x1007  /* PI C-863 */
+#define PI_E861_PID	0x1008  /* PI E-861 Piezomotor Controller */
+#define PI_C867_PID	0x1009  /* PI C-867 Piezomotor Controller */
+#define PI_E609_PID	0x100D  /* PI E-609 Digital Piezo Controller */
+#define PI_E709_PID	0x100E  /* PI E-709 Digital Piezo Controller */
+#define PI_100F_PID	0x100F  /* PI Digital Piezo Controller */
+#define PI_1011_PID	0x1011  /* PI Digital Piezo Controller */
+#define PI_1012_PID	0x1012  /* PI Motion Controller */
+#define PI_1013_PID	0x1013  /* PI Motion Controller */
+#define PI_1014_PID	0x1014  /* PI Device */
+#define PI_1015_PID	0x1015  /* PI Device */
+#define PI_1016_PID	0x1016  /* PI Digital Servo Module */
 
 /*
  * Kondo Kagaku Co.Ltd.
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 113560d..c068b4d 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1090,6 +1090,10 @@ static const struct usb_device_id option_ids[] = {
 	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
 	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
+
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 70aa47d..f7c1753 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1183,7 +1183,7 @@ static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green,
 			break;
 
 		if (regno < 16) {
-			u16 pal;
+			u32 pal;
 			pal = ((red >> (16 - var->red.length)) <<
 					var->red.offset) |
 				((green >> (16 - var->green.length)) <<
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 284798a..89588e7 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -231,7 +231,7 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 		return ret;
 
 	if (hwdev && hwdev->coherent_dma_mask)
-		dma_mask = hwdev->coherent_dma_mask;
+		dma_mask = dma_alloc_coherent_mask(hwdev, flags);
 
 	phys = virt_to_phys(ret);
 	dev_addr = xen_phys_to_bus(phys);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 0bb785f..51574d4 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -882,7 +882,7 @@ cifs_push_mandatory_locks(struct cifsFileInfo *cfile)
 	if (!buf) {
 		mutex_unlock(&cinode->lock_mutex);
 		FreeXid(xid);
-		return rc;
+		return -ENOMEM;
 	}
 
 	for (i = 0; i < 2; i++) {
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index af11098..7c7556b 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -640,6 +640,7 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	struct dentry *lower_old_dir_dentry;
 	struct dentry *lower_new_dir_dentry;
 	struct dentry *trap = NULL;
+	struct inode *target_inode;
 
 	lower_old_dentry = ecryptfs_dentry_to_lower(old_dentry);
 	lower_new_dentry = ecryptfs_dentry_to_lower(new_dentry);
@@ -647,6 +648,7 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	dget(lower_new_dentry);
 	lower_old_dir_dentry = dget_parent(lower_old_dentry);
 	lower_new_dir_dentry = dget_parent(lower_new_dentry);
+	target_inode = new_dentry->d_inode;
 	trap = lock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
 	/* source should not be ancestor of target */
 	if (trap == lower_old_dentry) {
@@ -662,6 +664,9 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 			lower_new_dir_dentry->d_inode, lower_new_dentry);
 	if (rc)
 		goto out_lock;
+	if (target_inode)
+		fsstack_copy_attr_all(target_inode,
+				      ecryptfs_inode_to_lower(target_inode));
 	fsstack_copy_attr_all(new_dir, lower_new_dir_dentry->d_inode);
 	if (new_dir != old_dir)
 		fsstack_copy_attr_all(old_dir, lower_old_dir_dentry->d_inode);
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 5b3f907..71b263f 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -3072,6 +3072,8 @@ static int ext3_do_update_inode(handle_t *handle,
 	struct ext3_inode_info *ei = EXT3_I(inode);
 	struct buffer_head *bh = iloc->bh;
 	int err = 0, rc, block;
+	int need_datasync = 0;
+	__le32 disksize;
 
 again:
 	/* we can't allow multiple procs in here at once, its a bit racey */
@@ -3109,7 +3111,11 @@ again:
 		raw_inode->i_gid_high = 0;
 	}
 	raw_inode->i_links_count = cpu_to_le16(inode->i_nlink);
-	raw_inode->i_size = cpu_to_le32(ei->i_disksize);
+	disksize = cpu_to_le32(ei->i_disksize);
+	if (disksize != raw_inode->i_size) {
+		need_datasync = 1;
+		raw_inode->i_size = disksize;
+	}
 	raw_inode->i_atime = cpu_to_le32(inode->i_atime.tv_sec);
 	raw_inode->i_ctime = cpu_to_le32(inode->i_ctime.tv_sec);
 	raw_inode->i_mtime = cpu_to_le32(inode->i_mtime.tv_sec);
@@ -3125,8 +3131,11 @@ again:
 	if (!S_ISREG(inode->i_mode)) {
 		raw_inode->i_dir_acl = cpu_to_le32(ei->i_dir_acl);
 	} else {
-		raw_inode->i_size_high =
-			cpu_to_le32(ei->i_disksize >> 32);
+		disksize = cpu_to_le32(ei->i_disksize >> 32);
+		if (disksize != raw_inode->i_size_high) {
+			raw_inode->i_size_high = disksize;
+			need_datasync = 1;
+		}
 		if (ei->i_disksize > 0x7fffffffULL) {
 			struct super_block *sb = inode->i_sb;
 			if (!EXT3_HAS_RO_COMPAT_FEATURE(sb,
@@ -3179,6 +3188,8 @@ again:
 	ext3_clear_inode_state(inode, EXT3_STATE_NEW);
 
 	atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid);
+	if (need_datasync)
+		atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid);
 out_brelse:
 	brelse (bh);
 	ext3_std_error(inode->i_sb, err);
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 2aaf3ea..5c029fb 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1524,6 +1524,7 @@ static int fuse_retrieve(struct fuse_conn *fc, struct inode *inode,
 		req->pages[req->num_pages] = page;
 		req->num_pages++;
 
+		offset = 0;
 		num -= this_num;
 		total_len += this_num;
 		index++;
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 50a15fa..b78b5b6 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -150,7 +150,7 @@ static void nfs_zap_caches_locked(struct inode *inode)
 	nfsi->attrtimeo = NFS_MINATTRTIMEO(inode);
 	nfsi->attrtimeo_timestamp = jiffies;
 
-	memset(NFS_COOKIEVERF(inode), 0, sizeof(NFS_COOKIEVERF(inode)));
+	memset(NFS_I(inode)->cookieverf, 0, sizeof(NFS_I(inode)->cookieverf));
 	if (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode))
 		nfsi->cache_validity |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
 	else
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index 5195fd6..dba87e6 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -633,7 +633,7 @@ nfs3_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
 		  u64 cookie, struct page **pages, unsigned int count, int plus)
 {
 	struct inode		*dir = dentry->d_inode;
-	__be32			*verf = NFS_COOKIEVERF(dir);
+	__be32			*verf = NFS_I(dir)->cookieverf;
 	struct nfs3_readdirargs	arg = {
 		.fh		= NFS_FH(dir),
 		.cookie		= cookie,
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index d20221d..61796a40 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3025,11 +3025,11 @@ static int _nfs4_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
 			dentry->d_parent->d_name.name,
 			dentry->d_name.name,
 			(unsigned long long)cookie);
-	nfs4_setup_readdir(cookie, NFS_COOKIEVERF(dir), dentry, &args);
+	nfs4_setup_readdir(cookie, NFS_I(dir)->cookieverf, dentry, &args);
 	res.pgbase = args.pgbase;
 	status = nfs4_call_sync(NFS_SERVER(dir)->client, NFS_SERVER(dir), &msg, &args.seq_args, &res.seq_res, 0);
 	if (status >= 0) {
-		memcpy(NFS_COOKIEVERF(dir), res.verifier.data, NFS4_VERIFIER_SIZE);
+		memcpy(NFS_I(dir)->cookieverf, res.verifier.data, NFS4_VERIFIER_SIZE);
 		status += args.pgbase;
 	}
 
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index bdd5bdc..f5ef3d0 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -6113,12 +6113,15 @@ static int nfs4_xdr_dec_open(struct rpc_rqst *rqstp, struct xdr_stream *xdr,
 	status = decode_open(xdr, res);
 	if (status)
 		goto out;
-	if (decode_getfh(xdr, &res->fh) != 0)
+	status = decode_getfh(xdr, &res->fh);
+	if (status)
 		goto out;
-	if (decode_getfattr(xdr, res->f_attr, res->server,
-				!RPC_IS_ASYNC(rqstp->rq_task)) != 0)
+	status = decode_getfattr(xdr, res->f_attr, res->server,
+				 !RPC_IS_ASYNC(rqstp->rq_task));
+	if (status)
 		goto out;
-	if (decode_restorefh(xdr) != 0)
+	status = decode_restorefh(xdr);
+	if (status)
 		goto out;
 	decode_getfattr(xdr, res->dir_attr, res->server,
 			!RPC_IS_ASYNC(rqstp->rq_task));
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 6e85ec6..e42d6f6 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1820,6 +1820,7 @@ static int nfs_validate_mount_data(void *options,
 
 		memcpy(sap, &data->addr, sizeof(data->addr));
 		args->nfs_server.addrlen = sizeof(data->addr);
+		args->nfs_server.port = ntohs(data->addr.sin_port);
 		if (!nfs_verify_server_address(sap))
 			goto out_no_address;
 
@@ -2538,6 +2539,7 @@ static int nfs4_validate_mount_data(void *options,
 			return -EFAULT;
 		if (!nfs_verify_server_address(sap))
 			goto out_no_address;
+		args->nfs_server.port = ntohs(((struct sockaddr_in *)sap)->sin_port);
 
 		if (data->auth_flavourlen) {
 			if (data->auth_flavourlen > 1)
diff --git a/fs/stat.c b/fs/stat.c
index 8806b89..7b21801 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -57,12 +57,13 @@ EXPORT_SYMBOL(vfs_getattr);
 
 int vfs_fstat(unsigned int fd, struct kstat *stat)
 {
-	struct file *f = fget(fd);
+	int fput_needed;
+	struct file *f = fget_raw_light(fd, &fput_needed);
 	int error = -EBADF;
 
 	if (f) {
 		error = vfs_getattr(f->f_path.mnt, f->f_path.dentry, stat);
-		fput(f);
+		fput_light(f, fput_needed);
 	}
 	return error;
 }
diff --git a/fs/udf/file.c b/fs/udf/file.c
index d567b84..874c9e3 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -39,20 +39,24 @@
 #include "udf_i.h"
 #include "udf_sb.h"
 
-static int udf_adinicb_readpage(struct file *file, struct page *page)
+static void __udf_adinicb_readpage(struct page *page)
 {
 	struct inode *inode = page->mapping->host;
 	char *kaddr;
 	struct udf_inode_info *iinfo = UDF_I(inode);
 
-	BUG_ON(!PageLocked(page));
-
 	kaddr = kmap(page);
-	memset(kaddr, 0, PAGE_CACHE_SIZE);
 	memcpy(kaddr, iinfo->i_ext.i_data + iinfo->i_lenEAttr, inode->i_size);
+	memset(kaddr + inode->i_size, 0, PAGE_CACHE_SIZE - inode->i_size);
 	flush_dcache_page(page);
 	SetPageUptodate(page);
 	kunmap(page);
+}
+
+static int udf_adinicb_readpage(struct file *file, struct page *page)
+{
+	BUG_ON(!PageLocked(page));
+	__udf_adinicb_readpage(page);
 	unlock_page(page);
 
 	return 0;
@@ -77,6 +81,25 @@ static int udf_adinicb_writepage(struct page *page,
 	return 0;
 }
 
+static int udf_adinicb_write_begin(struct file *file,
+			struct address_space *mapping, loff_t pos,
+			unsigned len, unsigned flags, struct page **pagep,
+			void **fsdata)
+{
+	struct page *page;
+
+	if (WARN_ON_ONCE(pos >= PAGE_CACHE_SIZE))
+		return -EIO;
+	page = grab_cache_page_write_begin(mapping, 0, flags);
+	if (!page)
+		return -ENOMEM;
+	*pagep = page;
+
+	if (!PageUptodate(page) && len != PAGE_CACHE_SIZE)
+		__udf_adinicb_readpage(page);
+	return 0;
+}
+
 static int udf_adinicb_write_end(struct file *file,
 			struct address_space *mapping,
 			loff_t pos, unsigned len, unsigned copied,
@@ -98,8 +121,8 @@ static int udf_adinicb_write_end(struct file *file,
 const struct address_space_operations udf_adinicb_aops = {
 	.readpage	= udf_adinicb_readpage,
 	.writepage	= udf_adinicb_writepage,
-	.write_begin = simple_write_begin,
-	.write_end = udf_adinicb_write_end,
+	.write_begin	= udf_adinicb_write_begin,
+	.write_end	= udf_adinicb_write_end,
 };
 
 static ssize_t udf_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
index ddd46db..7639f18 100644
--- a/include/drm/drm_mode.h
+++ b/include/drm/drm_mode.h
@@ -277,8 +277,9 @@ struct drm_mode_mode_cmd {
 	struct drm_mode_modeinfo mode;
 };
 
-#define DRM_MODE_CURSOR_BO	(1<<0)
-#define DRM_MODE_CURSOR_MOVE	(1<<1)
+#define DRM_MODE_CURSOR_BO	0x01
+#define DRM_MODE_CURSOR_MOVE	0x02
+#define DRM_MODE_CURSOR_FLAGS	0x03
 
 /*
  * depending on the value in flags different members are used.
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index ad81e1c..445f978 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -226,7 +226,7 @@ static inline int kobject_uevent_env(struct kobject *kobj,
 
 static inline __printf(2, 3)
 int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
-{ return 0; }
+{ return -ENOMEM; }
 
 static inline int kobject_action_type(const char *buf, size_t count,
 				      enum kobject_action *type)
diff --git a/include/linux/ktime.h b/include/linux/ktime.h
index 603bec2..06177ba10 100644
--- a/include/linux/ktime.h
+++ b/include/linux/ktime.h
@@ -58,13 +58,6 @@ union ktime {
 
 typedef union ktime ktime_t;		/* Kill this */
 
-#define KTIME_MAX			((s64)~((u64)1 << 63))
-#if (BITS_PER_LONG == 64)
-# define KTIME_SEC_MAX			(KTIME_MAX / NSEC_PER_SEC)
-#else
-# define KTIME_SEC_MAX			LONG_MAX
-#endif
-
 /*
  * ktime_t definitions when using the 64-bit scalar representation:
  */
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index c8ef9bc..87967ee 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -219,6 +219,7 @@ struct mmc_card {
 #define MMC_QUIRK_BLK_NO_CMD23	(1<<7)		/* Avoid CMD23 for regular multiblock */
 #define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8)	/* Avoid sending 512 bytes in */
 #define MMC_QUIRK_LONG_READ_TIME (1<<9)		/* Data read time > CSD says */
+#define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10)	/* Skip secure for erase/trim */
 						/* byte mode */
 	unsigned int    poweroff_notify_state;	/* eMMC4.5 notify feature */
 #define MMC_NO_POWER_NOTIFICATION	0
diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h
index 30b0c4e..43e038a 100644
--- a/include/linux/mv643xx_eth.h
+++ b/include/linux/mv643xx_eth.h
@@ -15,6 +15,8 @@
 #define MV643XX_ETH_SIZE_REG_4		0x2224
 #define MV643XX_ETH_BASE_ADDR_ENABLE_REG	0x2290
 
+#define MV643XX_TX_CSUM_DEFAULT_LIMIT	0
+
 struct mv643xx_eth_shared_platform_data {
 	struct mbus_dram_target_info	*dram;
 	struct platform_device	*shared_smi;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index cb52340..00ca32b 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1299,6 +1299,8 @@ struct net_device {
 	/* for setting kernel sock attribute on TCP connection setup */
 #define GSO_MAX_SIZE		65536
 	unsigned int		gso_max_size;
+#define GSO_MAX_SEGS		65535
+	u16			gso_max_segs;
 
 #ifdef CONFIG_DCB
 	/* Data Center Bridging netlink ops */
@@ -1511,6 +1513,8 @@ struct packet_type {
 	struct sk_buff		**(*gro_receive)(struct sk_buff **head,
 					       struct sk_buff *skb);
 	int			(*gro_complete)(struct sk_buff *skb);
+	bool			(*id_match)(struct packet_type *ptype,
+					    struct sock *sk);
 	void			*af_packet_priv;
 	struct list_head	list;
 };
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 92ecf55..33c52a2 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -261,11 +261,6 @@ static inline const struct nfs_rpc_ops *NFS_PROTO(const struct inode *inode)
 	return NFS_SERVER(inode)->nfs_client->rpc_ops;
 }
 
-static inline __be32 *NFS_COOKIEVERF(const struct inode *inode)
-{
-	return NFS_I(inode)->cookieverf;
-}
-
 static inline unsigned NFS_MINATTRTIMEO(const struct inode *inode)
 {
 	struct nfs_server *nfss = NFS_SERVER(inode);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 2aaee0c..67cc215 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2124,7 +2124,7 @@
 #define PCI_DEVICE_ID_TIGON3_5704S	0x16a8
 #define PCI_DEVICE_ID_NX2_57800_VF	0x16a9
 #define PCI_DEVICE_ID_NX2_5706S		0x16aa
-#define PCI_DEVICE_ID_NX2_57840_MF	0x16ab
+#define PCI_DEVICE_ID_NX2_57840_MF	0x16a4
 #define PCI_DEVICE_ID_NX2_5708S		0x16ac
 #define PCI_DEVICE_ID_NX2_57840_VF	0x16ad
 #define PCI_DEVICE_ID_NX2_57810_MF	0x16ae
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index b1f8912..b669be6 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -794,7 +794,7 @@ struct perf_event {
 	struct hw_perf_event		hw;
 
 	struct perf_event_context	*ctx;
-	struct file			*filp;
+	atomic_long_t			refcount;
 
 	/*
 	 * These accumulate total time (in nanoseconds) that children
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index 15518a1..0a4cd10 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -114,6 +114,7 @@ struct rpc_xprt_ops {
 	void		(*set_buffer_size)(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize);
 	int		(*reserve_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
 	void		(*release_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
+	void		(*alloc_slot)(struct rpc_xprt *xprt, struct rpc_task *task);
 	void		(*rpcbind)(struct rpc_task *task);
 	void		(*set_port)(struct rpc_xprt *xprt, unsigned short port);
 	void		(*connect)(struct rpc_task *task);
@@ -274,6 +275,8 @@ void			xprt_connect(struct rpc_task *task);
 void			xprt_reserve(struct rpc_task *task);
 int			xprt_reserve_xprt(struct rpc_xprt *xprt, struct rpc_task *task);
 int			xprt_reserve_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task);
+void			xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task);
+void			xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task);
 int			xprt_prepare_transmit(struct rpc_task *task);
 void			xprt_transmit(struct rpc_task *task);
 void			xprt_end_transmit(struct rpc_task *task);
diff --git a/include/linux/time.h b/include/linux/time.h
index b306178..8c0216e 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -107,11 +107,36 @@ static inline struct timespec timespec_sub(struct timespec lhs,
 	return ts_delta;
 }
 
+#define KTIME_MAX			((s64)~((u64)1 << 63))
+#if (BITS_PER_LONG == 64)
+# define KTIME_SEC_MAX			(KTIME_MAX / NSEC_PER_SEC)
+#else
+# define KTIME_SEC_MAX			LONG_MAX
+#endif
+
 /*
  * Returns true if the timespec is norm, false if denorm:
  */
-#define timespec_valid(ts) \
-	(((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC))
+static inline bool timespec_valid(const struct timespec *ts)
+{
+	/* Dates before 1970 are bogus */
+	if (ts->tv_sec < 0)
+		return false;
+	/* Can't have more nanoseconds then a second */
+	if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
+		return false;
+	return true;
+}
+
+static inline bool timespec_valid_strict(const struct timespec *ts)
+{
+	if (!timespec_valid(ts))
+		return false;
+	/* Disallow values that could overflow ktime_t */
+	if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX)
+		return false;
+	return true;
+}
 
 extern void read_persistent_clock(struct timespec *ts);
 extern void read_boot_clock(struct timespec *ts);
diff --git a/include/net/scm.h b/include/net/scm.h
index d456f4c..0c0017c 100644
--- a/include/net/scm.h
+++ b/include/net/scm.h
@@ -71,9 +71,11 @@ static __inline__ void scm_destroy(struct scm_cookie *scm)
 }
 
 static __inline__ int scm_send(struct socket *sock, struct msghdr *msg,
-			       struct scm_cookie *scm)
+			       struct scm_cookie *scm, bool forcecreds)
 {
 	memset(scm, 0, sizeof(*scm));
+	if (forcecreds)
+		scm_set_cred(scm, task_tgid(current), current_cred());
 	unix_get_peersec_dgram(sock, scm);
 	if (msg->msg_controllen <= 0)
 		return 0;
diff --git a/include/net/sock.h b/include/net/sock.h
index 32e3937..ddf523c 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -194,6 +194,7 @@ struct sock_common {
   *	@sk_route_nocaps: forbidden route capabilities (e.g NETIF_F_GSO_MASK)
   *	@sk_gso_type: GSO type (e.g. %SKB_GSO_TCPV4)
   *	@sk_gso_max_size: Maximum GSO segment size to build
+  *	@sk_gso_max_segs: Maximum number of GSO segments
   *	@sk_lingertime: %SO_LINGER l_linger setting
   *	@sk_backlog: always used with the per-socket spinlock held
   *	@sk_callback_lock: used with the callbacks in the end of this struct
@@ -310,6 +311,7 @@ struct sock {
 	int			sk_route_nocaps;
 	int			sk_gso_type;
 	unsigned int		sk_gso_max_size;
+	u16			sk_gso_max_segs;
 	int			sk_rcvlowat;
 	unsigned long	        sk_lingertime;
 	struct sk_buff_head	sk_error_queue;
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 58690af..7d1f05e 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -3011,12 +3011,12 @@ EXPORT_SYMBOL_GPL(perf_event_release_kernel);
 /*
  * Called when the last reference to the file is gone.
  */
-static int perf_release(struct inode *inode, struct file *file)
+static void put_event(struct perf_event *event)
 {
-	struct perf_event *event = file->private_data;
 	struct task_struct *owner;
 
-	file->private_data = NULL;
+	if (!atomic_long_dec_and_test(&event->refcount))
+		return;
 
 	rcu_read_lock();
 	owner = ACCESS_ONCE(event->owner);
@@ -3051,7 +3051,13 @@ static int perf_release(struct inode *inode, struct file *file)
 		put_task_struct(owner);
 	}
 
-	return perf_event_release_kernel(event);
+	perf_event_release_kernel(event);
+}
+
+static int perf_release(struct inode *inode, struct file *file)
+{
+	put_event(file->private_data);
+	return 0;
 }
 
 u64 perf_event_read_value(struct perf_event *event, u64 *enabled, u64 *running)
@@ -3304,7 +3310,7 @@ unlock:
 
 static const struct file_operations perf_fops;
 
-static struct perf_event *perf_fget_light(int fd, int *fput_needed)
+static struct file *perf_fget_light(int fd, int *fput_needed)
 {
 	struct file *file;
 
@@ -3318,7 +3324,7 @@ static struct perf_event *perf_fget_light(int fd, int *fput_needed)
 		return ERR_PTR(-EBADF);
 	}
 
-	return file->private_data;
+	return file;
 }
 
 static int perf_event_set_output(struct perf_event *event,
@@ -3350,19 +3356,21 @@ static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	case PERF_EVENT_IOC_SET_OUTPUT:
 	{
+		struct file *output_file = NULL;
 		struct perf_event *output_event = NULL;
 		int fput_needed = 0;
 		int ret;
 
 		if (arg != -1) {
-			output_event = perf_fget_light(arg, &fput_needed);
-			if (IS_ERR(output_event))
-				return PTR_ERR(output_event);
+			output_file = perf_fget_light(arg, &fput_needed);
+			if (IS_ERR(output_file))
+				return PTR_ERR(output_file);
+			output_event = output_file->private_data;
 		}
 
 		ret = perf_event_set_output(event, output_event);
 		if (output_event)
-			fput_light(output_event->filp, fput_needed);
+			fput_light(output_file, fput_needed);
 
 		return ret;
 	}
@@ -5912,6 +5920,7 @@ perf_event_alloc(struct perf_event_attr *attr, int cpu,
 
 	mutex_init(&event->mmap_mutex);
 
+	atomic_long_set(&event->refcount, 1);
 	event->cpu		= cpu;
 	event->attr		= *attr;
 	event->group_leader	= group_leader;
@@ -6182,12 +6191,12 @@ SYSCALL_DEFINE5(perf_event_open,
 		return event_fd;
 
 	if (group_fd != -1) {
-		group_leader = perf_fget_light(group_fd, &fput_needed);
-		if (IS_ERR(group_leader)) {
-			err = PTR_ERR(group_leader);
+		group_file = perf_fget_light(group_fd, &fput_needed);
+		if (IS_ERR(group_file)) {
+			err = PTR_ERR(group_file);
 			goto err_fd;
 		}
-		group_file = group_leader->filp;
+		group_leader = group_file->private_data;
 		if (flags & PERF_FLAG_FD_OUTPUT)
 			output_event = group_leader;
 		if (flags & PERF_FLAG_FD_NO_GROUP)
@@ -6322,7 +6331,6 @@ SYSCALL_DEFINE5(perf_event_open,
 		put_ctx(gctx);
 	}
 
-	event->filp = event_file;
 	WARN_ON_ONCE(ctx->parent_ctx);
 	mutex_lock(&ctx->mutex);
 
@@ -6412,7 +6420,6 @@ perf_event_create_kernel_counter(struct perf_event_attr *attr, int cpu,
 		goto err_free;
 	}
 
-	event->filp = NULL;
 	WARN_ON_ONCE(ctx->parent_ctx);
 	mutex_lock(&ctx->mutex);
 	perf_install_in_context(ctx, event, cpu);
@@ -6461,7 +6468,7 @@ static void sync_child_event(struct perf_event *child_event,
 	 * Release the parent event, if this was the last
 	 * reference to it.
 	 */
-	fput(parent_event->filp);
+	put_event(parent_event);
 }
 
 static void
@@ -6537,9 +6544,8 @@ static void perf_event_exit_task_context(struct task_struct *child, int ctxn)
 	 *
 	 *   __perf_event_exit_task()
 	 *     sync_child_event()
-	 *       fput(parent_event->filp)
-	 *         perf_release()
-	 *           mutex_lock(&ctx->mutex)
+	 *       put_event()
+	 *         mutex_lock(&ctx->mutex)
 	 *
 	 * But since its the parent context it won't be the same instance.
 	 */
@@ -6607,7 +6613,7 @@ static void perf_free_event(struct perf_event *event,
 	list_del_init(&event->child_list);
 	mutex_unlock(&parent->child_mutex);
 
-	fput(parent->filp);
+	put_event(parent);
 
 	perf_group_detach(event);
 	list_del_event(event, ctx);
@@ -6687,6 +6693,12 @@ inherit_event(struct perf_event *parent_event,
 				           NULL, NULL);
 	if (IS_ERR(child_event))
 		return child_event;
+
+	if (!atomic_long_inc_not_zero(&parent_event->refcount)) {
+		free_event(child_event);
+		return NULL;
+	}
+
 	get_ctx(child_ctx);
 
 	/*
@@ -6728,14 +6740,6 @@ inherit_event(struct perf_event *parent_event,
 	raw_spin_unlock_irqrestore(&child_ctx->lock, flags);
 
 	/*
-	 * Get a reference to the parent filp - we will fput it
-	 * when the child event exits. This is safe to do because
-	 * we are in the parent and we know that the filp still
-	 * exists and has a nonzero count:
-	 */
-	atomic_long_inc(&parent_event->filp->f_count);
-
-	/*
 	 * Link this into the parent event's child list
 	 */
 	WARN_ON_ONCE(parent_event->ctx->parent_ctx);
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 03e67d4..5ee1ac0 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -382,7 +382,7 @@ int do_settimeofday(const struct timespec *tv)
 	struct timespec ts_delta;
 	unsigned long flags;
 
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+	if (!timespec_valid_strict(tv))
 		return -EINVAL;
 
 	write_seqlock_irqsave(&xtime_lock, flags);
@@ -417,6 +417,8 @@ EXPORT_SYMBOL(do_settimeofday);
 int timekeeping_inject_offset(struct timespec *ts)
 {
 	unsigned long flags;
+	struct timespec tmp;
+	int ret = 0;
 
 	if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
 		return -EINVAL;
@@ -425,9 +427,16 @@ int timekeeping_inject_offset(struct timespec *ts)
 
 	timekeeping_forward_now();
 
+	tmp = timespec_add(xtime,  *ts);
+	if (!timespec_valid_strict(&tmp)) {
+		ret = -EINVAL;
+		goto error;
+	}
+
 	xtime = timespec_add(xtime, *ts);
 	wall_to_monotonic = timespec_sub(wall_to_monotonic, *ts);
 
+error: /* even if we error out, we forwarded the time, so call update */
 	timekeeping_update(true);
 
 	write_sequnlock_irqrestore(&xtime_lock, flags);
@@ -435,7 +444,7 @@ int timekeeping_inject_offset(struct timespec *ts)
 	/* signal hrtimers about time change */
 	clock_was_set();
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(timekeeping_inject_offset);
 
@@ -582,7 +591,20 @@ void __init timekeeping_init(void)
 	struct timespec now, boot;
 
 	read_persistent_clock(&now);
+	if (!timespec_valid_strict(&now)) {
+		pr_warn("WARNING: Persistent clock returned invalid value!\n"
+			"         Check your CMOS/BIOS settings.\n");
+		now.tv_sec = 0;
+		now.tv_nsec = 0;
+	}
+
 	read_boot_clock(&boot);
+	if (!timespec_valid_strict(&boot)) {
+		pr_warn("WARNING: Boot clock returned invalid value!\n"
+			"         Check your CMOS/BIOS settings.\n");
+		boot.tv_sec = 0;
+		boot.tv_nsec = 0;
+	}
 
 	write_seqlock_irqsave(&xtime_lock, flags);
 
@@ -627,7 +649,7 @@ static void update_sleep_time(struct timespec t)
  */
 static void __timekeeping_inject_sleeptime(struct timespec *delta)
 {
-	if (!timespec_valid(delta)) {
+	if (!timespec_valid_strict(delta)) {
 		printk(KERN_WARNING "__timekeeping_inject_sleeptime: Invalid "
 					"sleep delta value!\n");
 		return;
@@ -1011,6 +1033,10 @@ static void update_wall_time(void)
 #else
 	offset = (clock->read(clock) - clock->cycle_last) & clock->mask;
 #endif
+	/* Check if there's really nothing to do */
+	if (offset < timekeeper.cycle_interval)
+		return;
+
 	timekeeper.xtime_nsec = (s64)xtime.tv_nsec << timekeeper.shift;
 
 	/*
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index a650bee..979d4de 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -3437,14 +3437,17 @@ static int __cpuinit trustee_thread(void *__gcwq)
 
 	for_each_busy_worker(worker, i, pos, gcwq) {
 		struct work_struct *rebind_work = &worker->rebind_work;
+		unsigned long worker_flags = worker->flags;
 
 		/*
 		 * Rebind_work may race with future cpu hotplug
 		 * operations.  Use a separate flag to mark that
-		 * rebinding is scheduled.
+		 * rebinding is scheduled.  The morphing should
+		 * be atomic.
 		 */
-		worker->flags |= WORKER_REBIND;
-		worker->flags &= ~WORKER_ROGUE;
+		worker_flags |= WORKER_REBIND;
+		worker_flags &= ~WORKER_ROGUE;
+		ACCESS_ONCE(worker->flags) = worker_flags;
 
 		/* queue rebind_work, wq doesn't matter, use the default one */
 		if (test_and_set_bit(WORK_STRUCT_PENDING_BIT,
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index c0007f9..11b8d47 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2533,7 +2533,7 @@ int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol, int no_context)
 		break;
 
 	default:
-		BUG();
+		return -EINVAL;
 	}
 
 	l = strlen(policy_modes[mode]);
diff --git a/net/atm/common.c b/net/atm/common.c
index 14ff9fe..0ca06e8 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -784,6 +784,7 @@ int vcc_getsockopt(struct socket *sock, int level, int optname,
 
 		if (!vcc->dev || !test_bit(ATM_VF_ADDR, &vcc->flags))
 			return -ENOTCONN;
+		memset(&pvc, 0, sizeof(pvc));
 		pvc.sap_family = AF_ATMPVC;
 		pvc.sap_addr.itf = vcc->dev->number;
 		pvc.sap_addr.vpi = vcc->vpi;
diff --git a/net/atm/pvc.c b/net/atm/pvc.c
index 3a73491..ae03240 100644
--- a/net/atm/pvc.c
+++ b/net/atm/pvc.c
@@ -95,6 +95,7 @@ static int pvc_getname(struct socket *sock, struct sockaddr *sockaddr,
 		return -ENOTCONN;
 	*sockaddr_len = sizeof(struct sockaddr_atmpvc);
 	addr = (struct sockaddr_atmpvc *)sockaddr;
+	memset(addr, 0, sizeof(*addr));
 	addr->sap_family = AF_ATMPVC;
 	addr->sap_addr.itf = vcc->dev->number;
 	addr->sap_addr.vpi = vcc->vpi;
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index f6afe3d..8361ee4 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -388,6 +388,7 @@ static int hci_sock_getname(struct socket *sock, struct sockaddr *addr, int *add
 	*addr_len = sizeof(*haddr);
 	haddr->hci_family = AF_BLUETOOTH;
 	haddr->hci_dev    = hdev->id;
+	haddr->hci_channel= 0;
 
 	release_sock(sk);
 	return 0;
@@ -671,6 +672,7 @@ static int hci_sock_getsockopt(struct socket *sock, int level, int optname, char
 		{
 			struct hci_filter *f = &hci_pi(sk)->filter;
 
+			memset(&uf, 0, sizeof(uf));
 			uf.type_mask = f->type_mask;
 			uf.opcode    = f->opcode;
 			uf.event_mask[0] = *((u32 *) f->event_mask + 0);
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 5c406d3..6dedd6f 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -293,6 +293,7 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr, int *l
 
 	BT_DBG("sock %p, sk %p", sock, sk);
 
+	memset(la, 0, sizeof(struct sockaddr_l2));
 	addr->sa_family = AF_BLUETOOTH;
 	*len = sizeof(struct sockaddr_l2);
 
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 5417f61..7ee4ead 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -547,6 +547,7 @@ static int rfcomm_sock_getname(struct socket *sock, struct sockaddr *addr, int *
 
 	BT_DBG("sock %p, sk %p", sock, sk);
 
+	memset(sa, 0, sizeof(*sa));
 	sa->rc_family  = AF_BLUETOOTH;
 	sa->rc_channel = rfcomm_pi(sk)->channel;
 	if (peer)
@@ -835,6 +836,7 @@ static int rfcomm_sock_getsockopt(struct socket *sock, int level, int optname, c
 		}
 
 		sec.level = rfcomm_pi(sk)->sec_level;
+		sec.key_size = 0;
 
 		len = min_t(unsigned int, len, sizeof(sec));
 		if (copy_to_user(optval, (char *) &sec, len))
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index c258796..bc1eb56 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -471,7 +471,7 @@ static int rfcomm_get_dev_list(void __user *arg)
 
 	size = sizeof(*dl) + dev_num * sizeof(*di);
 
-	dl = kmalloc(size, GFP_KERNEL);
+	dl = kzalloc(size, GFP_KERNEL);
 	if (!dl)
 		return -ENOMEM;
 
diff --git a/net/core/dev.c b/net/core/dev.c
index 4b18703..832ba6d 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1059,6 +1059,8 @@ rollback:
  */
 int dev_set_alias(struct net_device *dev, const char *alias, size_t len)
 {
+	char *new_ifalias;
+
 	ASSERT_RTNL();
 
 	if (len >= IFALIASZ)
@@ -1072,9 +1074,10 @@ int dev_set_alias(struct net_device *dev, const char *alias, size_t len)
 		return 0;
 	}
 
-	dev->ifalias = krealloc(dev->ifalias, len + 1, GFP_KERNEL);
-	if (!dev->ifalias)
+	new_ifalias = krealloc(dev->ifalias, len + 1, GFP_KERNEL);
+	if (!new_ifalias)
 		return -ENOMEM;
+	dev->ifalias = new_ifalias;
 
 	strlcpy(dev->ifalias, alias, len+1);
 	return len;
@@ -1628,6 +1631,19 @@ static inline int deliver_skb(struct sk_buff *skb,
 	return pt_prev->func(skb, skb->dev, pt_prev, orig_dev);
 }
 
+static inline bool skb_loop_sk(struct packet_type *ptype, struct sk_buff *skb)
+{
+	if (ptype->af_packet_priv == NULL)
+		return false;
+
+	if (ptype->id_match)
+		return ptype->id_match(ptype, skb->sk);
+	else if ((struct sock *)ptype->af_packet_priv == skb->sk)
+		return true;
+
+	return false;
+}
+
 /*
  *	Support routine. Sends outgoing frames to any network
  *	taps currently in use.
@@ -1645,8 +1661,7 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
 		 * they originated from - MvS (miquels@drinkel.ow.org)
 		 */
 		if ((ptype->dev == dev || !ptype->dev) &&
-		    (ptype->af_packet_priv == NULL ||
-		     (struct sock *)ptype->af_packet_priv != skb->sk)) {
+		    (!skb_loop_sk(ptype, skb))) {
 			if (pt_prev) {
 				deliver_skb(skb2, pt_prev, skb->dev);
 				pt_prev = ptype;
@@ -2108,6 +2123,9 @@ u32 netif_skb_features(struct sk_buff *skb)
 	__be16 protocol = skb->protocol;
 	u32 features = skb->dev->features;
 
+	if (skb_shinfo(skb)->gso_segs > skb->dev->gso_max_segs)
+		features &= ~NETIF_F_GSO_MASK;
+
 	if (protocol == htons(ETH_P_8021Q)) {
 		struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data;
 		protocol = veh->h_vlan_encapsulated_proto;
@@ -5990,6 +6008,7 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
 	dev_net_set(dev, &init_net);
 
 	dev->gso_max_size = GSO_MAX_SIZE;
+	dev->gso_max_segs = GSO_MAX_SEGS;
 
 	INIT_LIST_HEAD(&dev->napi_list);
 	INIT_LIST_HEAD(&dev->unreg_list);
diff --git a/net/core/sock.c b/net/core/sock.c
index 8d095b9..018fd41 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1308,6 +1308,7 @@ void sk_setup_caps(struct sock *sk, struct dst_entry *dst)
 		} else {
 			sk->sk_route_caps |= NETIF_F_SG | NETIF_F_HW_CSUM;
 			sk->sk_gso_max_size = dst->dev->gso_max_size;
+			sk->sk_gso_max_segs = dst->dev->gso_max_segs;
 		}
 	}
 }
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index 3d604e1..4caf63f 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -532,6 +532,7 @@ static int ccid3_hc_tx_getsockopt(struct sock *sk, const int optname, int len,
 	case DCCP_SOCKOPT_CCID_TX_INFO:
 		if (len < sizeof(tfrc))
 			return -EINVAL;
+		memset(&tfrc, 0, sizeof(tfrc));
 		tfrc.tfrctx_x	   = hc->tx_x;
 		tfrc.tfrctx_x_recv = hc->tx_x_recv;
 		tfrc.tfrctx_x_calc = hc->tx_x_calc;
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index d2aae27..0064394 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -125,6 +125,8 @@ static DEFINE_SPINLOCK(mfc_unres_lock);
 static struct kmem_cache *mrt_cachep __read_mostly;
 
 static struct mr_table *ipmr_new_table(struct net *net, u32 id);
+static void ipmr_free_table(struct mr_table *mrt);
+
 static int ip_mr_forward(struct net *net, struct mr_table *mrt,
 			 struct sk_buff *skb, struct mfc_cache *cache,
 			 int local);
@@ -132,6 +134,7 @@ static int ipmr_cache_report(struct mr_table *mrt,
 			     struct sk_buff *pkt, vifi_t vifi, int assert);
 static int __ipmr_fill_mroute(struct mr_table *mrt, struct sk_buff *skb,
 			      struct mfc_cache *c, struct rtmsg *rtm);
+static void mroute_clean_tables(struct mr_table *mrt);
 static void ipmr_expire_process(unsigned long arg);
 
 #ifdef CONFIG_IP_MROUTE_MULTIPLE_TABLES
@@ -272,7 +275,7 @@ static void __net_exit ipmr_rules_exit(struct net *net)
 
 	list_for_each_entry_safe(mrt, next, &net->ipv4.mr_tables, list) {
 		list_del(&mrt->list);
-		kfree(mrt);
+		ipmr_free_table(mrt);
 	}
 	fib_rules_unregister(net->ipv4.mr_rules_ops);
 }
@@ -300,7 +303,7 @@ static int __net_init ipmr_rules_init(struct net *net)
 
 static void __net_exit ipmr_rules_exit(struct net *net)
 {
-	kfree(net->ipv4.mrt);
+	ipmr_free_table(net->ipv4.mrt);
 }
 #endif
 
@@ -337,6 +340,13 @@ static struct mr_table *ipmr_new_table(struct net *net, u32 id)
 	return mrt;
 }
 
+static void ipmr_free_table(struct mr_table *mrt)
+{
+	del_timer_sync(&mrt->ipmr_expire_timer);
+	mroute_clean_tables(mrt);
+	kfree(mrt);
+}
+
 /* Service routines creating virtual interfaces: DVMRP tunnels and PIMREG */
 
 static void ipmr_del_tunnel(struct net_device *dev, struct vifctl *v)
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index ad466a7..043d49b 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -740,7 +740,9 @@ static unsigned int tcp_xmit_size_goal(struct sock *sk, u32 mss_now,
 			   old_size_goal + mss_now > xmit_size_goal)) {
 			xmit_size_goal = old_size_goal;
 		} else {
-			tp->xmit_size_goal_segs = xmit_size_goal / mss_now;
+			tp->xmit_size_goal_segs =
+				min_t(u16, xmit_size_goal / mss_now,
+				      sk->sk_gso_max_segs);
 			xmit_size_goal = tp->xmit_size_goal_segs * mss_now;
 		}
 	}
diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c
index 850c737..6cebfd2 100644
--- a/net/ipv4/tcp_cong.c
+++ b/net/ipv4/tcp_cong.c
@@ -290,7 +290,8 @@ int tcp_is_cwnd_limited(const struct sock *sk, u32 in_flight)
 	left = tp->snd_cwnd - in_flight;
 	if (sk_can_gso(sk) &&
 	    left * sysctl_tcp_tso_win_divisor < tp->snd_cwnd &&
-	    left * tp->mss_cache < sk->sk_gso_max_size)
+	    left * tp->mss_cache < sk->sk_gso_max_size &&
+	    left < sk->sk_gso_max_segs)
 		return 1;
 	return left <= tcp_max_burst(tp);
 }
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index c51dd5b..921cbac 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1318,21 +1318,21 @@ static void tcp_cwnd_validate(struct sock *sk)
  * when we would be allowed to send the split-due-to-Nagle skb fully.
  */
 static unsigned int tcp_mss_split_point(const struct sock *sk, const struct sk_buff *skb,
-					unsigned int mss_now, unsigned int cwnd)
+					unsigned int mss_now, unsigned int max_segs)
 {
 	const struct tcp_sock *tp = tcp_sk(sk);
-	u32 needed, window, cwnd_len;
+	u32 needed, window, max_len;
 
 	window = tcp_wnd_end(tp) - TCP_SKB_CB(skb)->seq;
-	cwnd_len = mss_now * cwnd;
+	max_len = mss_now * max_segs;
 
-	if (likely(cwnd_len <= window && skb != tcp_write_queue_tail(sk)))
-		return cwnd_len;
+	if (likely(max_len <= window && skb != tcp_write_queue_tail(sk)))
+		return max_len;
 
 	needed = min(skb->len, window);
 
-	if (cwnd_len <= needed)
-		return cwnd_len;
+	if (max_len <= needed)
+		return max_len;
 
 	return needed - needed % mss_now;
 }
@@ -1560,7 +1560,8 @@ static int tcp_tso_should_defer(struct sock *sk, struct sk_buff *skb)
 	limit = min(send_win, cong_win);
 
 	/* If a full-sized TSO skb can be sent, do it. */
-	if (limit >= sk->sk_gso_max_size)
+	if (limit >= min_t(unsigned int, sk->sk_gso_max_size,
+			   sk->sk_gso_max_segs * tp->mss_cache))
 		goto send_now;
 
 	/* Middle in queue won't get any more data, full sendable already? */
@@ -1786,7 +1787,9 @@ static int tcp_write_xmit(struct sock *sk, unsigned int mss_now, int nonagle,
 		limit = mss_now;
 		if (tso_segs > 1 && !tcp_urg_mode(tp))
 			limit = tcp_mss_split_point(sk, skb, mss_now,
-						    cwnd_quota);
+						    min_t(unsigned int,
+							  cwnd_quota,
+							  sk->sk_gso_max_segs));
 
 		if (skb->len > limit &&
 		    unlikely(tso_fragment(sk, skb, limit, mss_now, gfp)))
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index a5521c5..aef80d7 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -493,8 +493,7 @@ static void addrconf_forward_change(struct net *net, __s32 newf)
 	struct net_device *dev;
 	struct inet6_dev *idev;
 
-	rcu_read_lock();
-	for_each_netdev_rcu(net, dev) {
+	for_each_netdev(net, dev) {
 		idev = __in6_dev_get(dev);
 		if (idev) {
 			int changed = (!idev->cnf.forwarding) ^ (!newf);
@@ -503,7 +502,6 @@ static void addrconf_forward_change(struct net *net, __s32 newf)
 				dev_forward_change(idev);
 		}
 	}
-	rcu_read_unlock();
 }
 
 static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index 89ff8c6..7501b22 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1253,11 +1253,10 @@ static void l2tp_tunnel_free(struct l2tp_tunnel *tunnel)
 	/* Remove from tunnel list */
 	spin_lock_bh(&pn->l2tp_tunnel_list_lock);
 	list_del_rcu(&tunnel->list);
+	kfree_rcu(tunnel, rcu);
 	spin_unlock_bh(&pn->l2tp_tunnel_list_lock);
-	synchronize_rcu();
 
 	atomic_dec(&l2tp_tunnel_count);
-	kfree(tunnel);
 }
 
 /* Create a socket for the tunnel, if one isn't set up by
diff --git a/net/l2tp/l2tp_core.h b/net/l2tp/l2tp_core.h
index a16a48e..4393794 100644
--- a/net/l2tp/l2tp_core.h
+++ b/net/l2tp/l2tp_core.h
@@ -157,6 +157,7 @@ struct l2tp_tunnel_cfg {
 
 struct l2tp_tunnel {
 	int			magic;		/* Should be L2TP_TUNNEL_MAGIC */
+	struct rcu_head rcu;
 	rwlock_t		hlist_lock;	/* protect session_hlist */
 	struct hlist_head	session_hlist[L2TP_HASH_SIZE];
 						/* hashed list of sessions,
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index a18e6c3..99a60d5 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -966,14 +966,13 @@ static int llc_ui_getname(struct socket *sock, struct sockaddr *uaddr,
 	struct sockaddr_llc sllc;
 	struct sock *sk = sock->sk;
 	struct llc_sock *llc = llc_sk(sk);
-	int rc = 0;
+	int rc = -EBADF;
 
 	memset(&sllc, 0, sizeof(sllc));
 	lock_sock(sk);
 	if (sock_flag(sk, SOCK_ZAPPED))
 		goto out;
 	*uaddrlen = sizeof(sllc);
-	memset(uaddr, 0, *uaddrlen);
 	if (peer) {
 		rc = -ENOTCONN;
 		if (sk->sk_state != TCP_ESTABLISHED)
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index e1a66cf..72f4253 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2713,6 +2713,7 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len)
 	{
 		struct ip_vs_timeout_user t;
 
+		memset(&t, 0, sizeof(t));
 		__ip_vs_get_timeouts(net, &t);
 		if (copy_to_user(user, &t, sizeof(t)) != 0)
 			ret = -EFAULT;
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index a99fb41..38b78b9 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1333,7 +1333,7 @@ static int netlink_sendmsg(struct kiocb *kiocb, struct socket *sock,
 	if (NULL == siocb->scm)
 		siocb->scm = &scm;
 
-	err = scm_send(sock, msg, siocb->scm);
+	err = scm_send(sock, msg, siocb->scm, true);
 	if (err < 0)
 		return err;
 
@@ -1344,7 +1344,8 @@ static int netlink_sendmsg(struct kiocb *kiocb, struct socket *sock,
 		dst_pid = addr->nl_pid;
 		dst_group = ffs(addr->nl_groups);
 		err =  -EPERM;
-		if (dst_group && !netlink_capable(sock, NL_NONROOT_SEND))
+		if ((dst_group || dst_pid) &&
+		    !netlink_capable(sock, NL_NONROOT_SEND))
 			goto out;
 	} else {
 		dst_pid = nlk->dst_pid;
@@ -2103,6 +2104,7 @@ static void __init netlink_add_usersock_entry(void)
 	rcu_assign_pointer(nl_table[NETLINK_USERSOCK].listeners, listeners);
 	nl_table[NETLINK_USERSOCK].module = THIS_MODULE;
 	nl_table[NETLINK_USERSOCK].registered = 1;
+	nl_table[NETLINK_USERSOCK].nl_nonroot = NL_NONROOT_SEND;
 
 	netlink_table_ungrab();
 }
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index d9d4970..85afc13 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1281,6 +1281,14 @@ static void __fanout_unlink(struct sock *sk, struct packet_sock *po)
 	spin_unlock(&f->lock);
 }
 
+bool match_fanout_group(struct packet_type *ptype, struct sock * sk)
+{
+	if (ptype->af_packet_priv == (void*)((struct packet_sock *)sk)->fanout)
+		return true;
+
+	return false;
+}
+
 static int fanout_add(struct sock *sk, u16 id, u16 type_flags)
 {
 	struct packet_sock *po = pkt_sk(sk);
@@ -1333,6 +1341,7 @@ static int fanout_add(struct sock *sk, u16 id, u16 type_flags)
 		match->prot_hook.dev = po->prot_hook.dev;
 		match->prot_hook.func = packet_rcv_fanout;
 		match->prot_hook.af_packet_priv = match;
+		match->prot_hook.id_match = match_fanout_group;
 		dev_add_pack(&match->prot_hook);
 		list_add(&match->list, &fanout_list);
 	}
@@ -1931,7 +1940,6 @@ static void tpacket_destruct_skb(struct sk_buff *skb)
 
 	if (likely(po->tx_ring.pg_vec)) {
 		ph = skb_shinfo(skb)->destructor_arg;
-		BUG_ON(__packet_get_status(po, ph) != TP_STATUS_SENDING);
 		BUG_ON(atomic_read(&po->tx_ring.pending) == 0);
 		atomic_dec(&po->tx_ring.pending);
 		__packet_set_status(po, ph, TP_STATUS_AVAILABLE);
diff --git a/net/sched/act_gact.c b/net/sched/act_gact.c
index b77f5a0..bdacd8d 100644
--- a/net/sched/act_gact.c
+++ b/net/sched/act_gact.c
@@ -67,6 +67,9 @@ static int tcf_gact_init(struct nlattr *nla, struct nlattr *est,
 	struct tcf_common *pc;
 	int ret = 0;
 	int err;
+#ifdef CONFIG_GACT_PROB
+	struct tc_gact_p *p_parm = NULL;
+#endif
 
 	if (nla == NULL)
 		return -EINVAL;
@@ -82,6 +85,12 @@ static int tcf_gact_init(struct nlattr *nla, struct nlattr *est,
 #ifndef CONFIG_GACT_PROB
 	if (tb[TCA_GACT_PROB] != NULL)
 		return -EOPNOTSUPP;
+#else
+	if (tb[TCA_GACT_PROB]) {
+		p_parm = nla_data(tb[TCA_GACT_PROB]);
+		if (p_parm->ptype >= MAX_RAND)
+			return -EINVAL;
+	}
 #endif
 
 	pc = tcf_hash_check(parm->index, a, bind, &gact_hash_info);
@@ -103,8 +112,7 @@ static int tcf_gact_init(struct nlattr *nla, struct nlattr *est,
 	spin_lock_bh(&gact->tcf_lock);
 	gact->tcf_action = parm->action;
 #ifdef CONFIG_GACT_PROB
-	if (tb[TCA_GACT_PROB] != NULL) {
-		struct tc_gact_p *p_parm = nla_data(tb[TCA_GACT_PROB]);
+	if (p_parm) {
 		gact->tcfg_paction = p_parm->paction;
 		gact->tcfg_pval    = p_parm->pval;
 		gact->tcfg_ptype   = p_parm->ptype;
@@ -133,7 +141,7 @@ static int tcf_gact(struct sk_buff *skb, const struct tc_action *a,
 
 	spin_lock(&gact->tcf_lock);
 #ifdef CONFIG_GACT_PROB
-	if (gact->tcfg_ptype && gact_rand[gact->tcfg_ptype] != NULL)
+	if (gact->tcfg_ptype)
 		action = gact_rand[gact->tcfg_ptype](gact);
 	else
 		action = gact->tcf_action;
diff --git a/net/socket.c b/net/socket.c
index 273cbce..68879db 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -2645,6 +2645,7 @@ static int dev_ifconf(struct net *net, struct compat_ifconf __user *uifc32)
 	if (copy_from_user(&ifc32, uifc32, sizeof(struct compat_ifconf)))
 		return -EFAULT;
 
+	memset(&ifc, 0, sizeof(ifc));
 	if (ifc32.ifcbuf == 0) {
 		ifc32.ifc_len = 0;
 		ifc.ifc_len = 0;
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 3ac9789..ffba207 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -962,11 +962,11 @@ static bool xprt_dynamic_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *req)
 	return false;
 }
 
-static void xprt_alloc_slot(struct rpc_task *task)
+void xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task)
 {
-	struct rpc_xprt	*xprt = task->tk_xprt;
 	struct rpc_rqst *req;
 
+	spin_lock(&xprt->reserve_lock);
 	if (!list_empty(&xprt->free)) {
 		req = list_entry(xprt->free.next, struct rpc_rqst, rq_list);
 		list_del(&req->rq_list);
@@ -987,12 +987,29 @@ static void xprt_alloc_slot(struct rpc_task *task)
 	default:
 		task->tk_status = -EAGAIN;
 	}
+	spin_unlock(&xprt->reserve_lock);
 	return;
 out_init_req:
 	task->tk_status = 0;
 	task->tk_rqstp = req;
 	xprt_request_init(task, xprt);
+	spin_unlock(&xprt->reserve_lock);
+}
+EXPORT_SYMBOL_GPL(xprt_alloc_slot);
+
+void xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task)
+{
+	/* Note: grabbing the xprt_lock_write() ensures that we throttle
+	 * new slot allocation if the transport is congested (i.e. when
+	 * reconnecting a stream transport or when out of socket write
+	 * buffer space).
+	 */
+	if (xprt_lock_write(xprt, task)) {
+		xprt_alloc_slot(xprt, task);
+		xprt_release_write(xprt, task);
+	}
 }
+EXPORT_SYMBOL_GPL(xprt_lock_and_alloc_slot);
 
 static void xprt_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *req)
 {
@@ -1076,20 +1093,9 @@ void xprt_reserve(struct rpc_task *task)
 	if (task->tk_rqstp != NULL)
 		return;
 
-	/* Note: grabbing the xprt_lock_write() here is not strictly needed,
-	 * but ensures that we throttle new slot allocation if the transport
-	 * is congested (e.g. if reconnecting or if we're out of socket
-	 * write buffer space).
-	 */
 	task->tk_timeout = 0;
 	task->tk_status = -EAGAIN;
-	if (!xprt_lock_write(xprt, task))
-		return;
-
-	spin_lock(&xprt->reserve_lock);
-	xprt_alloc_slot(task);
-	spin_unlock(&xprt->reserve_lock);
-	xprt_release_write(xprt, task);
+	xprt->ops->alloc_slot(xprt, task);
 }
 
 static inline __be32 xprt_alloc_xid(struct rpc_xprt *xprt)
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 06cdbff..5d9202d 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -713,6 +713,7 @@ static void xprt_rdma_print_stats(struct rpc_xprt *xprt, struct seq_file *seq)
 static struct rpc_xprt_ops xprt_rdma_procs = {
 	.reserve_xprt		= xprt_rdma_reserve_xprt,
 	.release_xprt		= xprt_release_xprt_cong, /* sunrpc/xprt.c */
+	.alloc_slot		= xprt_alloc_slot,
 	.release_request	= xprt_release_rqst_cong,       /* ditto */
 	.set_retrans_timeout	= xprt_set_retrans_timeout_def, /* ditto */
 	.rpcbind		= rpcb_getport_async,	/* sunrpc/rpcb_clnt.c */
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 1a6edc7..c5391af 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -2422,6 +2422,7 @@ static void bc_destroy(struct rpc_xprt *xprt)
 static struct rpc_xprt_ops xs_local_ops = {
 	.reserve_xprt		= xprt_reserve_xprt,
 	.release_xprt		= xs_tcp_release_xprt,
+	.alloc_slot		= xprt_alloc_slot,
 	.rpcbind		= xs_local_rpcbind,
 	.set_port		= xs_local_set_port,
 	.connect		= xs_connect,
@@ -2438,6 +2439,7 @@ static struct rpc_xprt_ops xs_udp_ops = {
 	.set_buffer_size	= xs_udp_set_buffer_size,
 	.reserve_xprt		= xprt_reserve_xprt_cong,
 	.release_xprt		= xprt_release_xprt_cong,
+	.alloc_slot		= xprt_alloc_slot,
 	.rpcbind		= rpcb_getport_async,
 	.set_port		= xs_set_port,
 	.connect		= xs_connect,
@@ -2455,6 +2457,7 @@ static struct rpc_xprt_ops xs_udp_ops = {
 static struct rpc_xprt_ops xs_tcp_ops = {
 	.reserve_xprt		= xprt_reserve_xprt,
 	.release_xprt		= xs_tcp_release_xprt,
+	.alloc_slot		= xprt_lock_and_alloc_slot,
 	.rpcbind		= rpcb_getport_async,
 	.set_port		= xs_set_port,
 	.connect		= xs_connect,
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index d99678a..317bfe3 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1435,7 +1435,7 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock,
 	if (NULL == siocb->scm)
 		siocb->scm = &tmp_scm;
 	wait_for_unix_gc();
-	err = scm_send(sock, msg, siocb->scm);
+	err = scm_send(sock, msg, siocb->scm, false);
 	if (err < 0)
 		return err;
 
@@ -1596,7 +1596,7 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock,
 	if (NULL == siocb->scm)
 		siocb->scm = &tmp_scm;
 	wait_for_unix_gc();
-	err = scm_send(sock, msg, siocb->scm);
+	err = scm_send(sock, msg, siocb->scm, false);
 	if (err < 0)
 		return err;
 
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index f3be54e..b0187e7 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -2312,6 +2312,7 @@ int snd_hda_codec_reset(struct hda_codec *codec)
 	}
 	if (codec->patch_ops.free)
 		codec->patch_ops.free(codec);
+	memset(&codec->patch_ops, 0, sizeof(codec->patch_ops));
 	codec->proc_widget_hook = NULL;
 	codec->spec = NULL;
 	free_hda_cache(&codec->amp_cache);
@@ -2324,7 +2325,6 @@ int snd_hda_codec_reset(struct hda_codec *codec)
 	codec->num_pcms = 0;
 	codec->pcm_info = NULL;
 	codec->preset = NULL;
-	memset(&codec->patch_ops, 0, sizeof(codec->patch_ops));
 	codec->slave_dig_outs = NULL;
 	codec->spdif_status_reset = 0;
 	module_put(codec->owner);
diff --git a/sound/pci/ice1712/prodigy_hifi.c b/sound/pci/ice1712/prodigy_hifi.c
index 764cc93..075d5aa 100644
--- a/sound/pci/ice1712/prodigy_hifi.c
+++ b/sound/pci/ice1712/prodigy_hifi.c
@@ -297,6 +297,7 @@ static int ak4396_dac_vol_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem
 }
 
 static const DECLARE_TLV_DB_SCALE(db_scale_wm_dac, -12700, 100, 1);
+static const DECLARE_TLV_DB_LINEAR(ak4396_db_scale, TLV_DB_GAIN_MUTE, 0);
 
 static struct snd_kcontrol_new prodigy_hd2_controls[] __devinitdata = {
     {
@@ -307,7 +308,7 @@ static struct snd_kcontrol_new prodigy_hd2_controls[] __devinitdata = {
 	.info = ak4396_dac_vol_info,
 	.get = ak4396_dac_vol_get,
 	.put = ak4396_dac_vol_put,
-	.tlv = { .p = db_scale_wm_dac },
+	.tlv = { .p = ak4396_db_scale },
     },
 };
 


-- 
Ben Hutchings
The world is coming to an end.	Please log off.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]