* [PATCH 1/5] Staging: bcm: DDRInit: Fixed coding style issue, replaced spaces w/ tabs.(patch set)
@ 2013-12-05 0:26 Gary Rookard
2013-12-05 8:57 ` Dan Carpenter
0 siblings, 1 reply; 2+ messages in thread
From: Gary Rookard @ 2013-12-05 0:26 UTC (permalink / raw)
To: gregkh; +Cc: lisa, devel, linux-kernel, Gary Rookard
This is the first patch of a series.
Replaced spaces in margin w/ 1 tab for lines:
11-15, 17-23, 25-58, 60, 62, 64
On branch staging-next
---
drivers/staging/bcm/DDRInit.c | 98 +++++++++++++++++++++----------------------
1 file changed, 49 insertions(+), 49 deletions(-)
diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index 9f7e30f..9ee844c 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -8,60 +8,60 @@
//DDR INIT-133Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 //index for 0x0F007000
static struct bcm_ddr_setting asT3_DDRSetting133MHz[]= {// # DPLL Clock Setting
- {0x0F000800,0x00007212},
- {0x0f000820,0x07F13FFF},
- {0x0f000810,0x00000F95},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
+ {0x0F000800,0x00007212},
+ {0x0f000820,0x07F13FFF},
+ {0x0f000810,0x00000F95},
+ {0x0f000860,0x00000000},
+ {0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
- {0x0f000840,0x0FFF1B00},
- {0x0f000870,0x00000002},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00a04C,0x0000000C},
+ {0x0f000840,0x0FFF1B00},
+ {0x0f000870,0x00000002},
+ {0x0F00a044,0x1fffffff},
+ {0x0F00a040,0x1f000000},
+ {0x0F00a084,0x1Cffffff},
+ {0x0F00a080,0x1C000000},
+ {0x0F00a04C,0x0000000C},
//Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x02000007},
- {0x0F007028,0x02020202},
- {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
- {0x0F007030,0x05000000},
- {0x0F007034,0x00000003},
- {0x0F007038,0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C,0x02101010},//ROB - 0x02101010,//0x02101018},
- {0x0F007040,0x45751200},//ROB - 0x45751200,//0x450f1200},
- {0x0F007044,0x110a0d00},//ROB - 0x110a0d00//0x111f0d00
- {0x0F007048,0x081b0306},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x0010246c},
- {0x0F007064,0x00000010},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00007000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
+ {0x0F007000,0x00010001},
+ {0x0F007004,0x01010100},
+ {0x0F007008,0x01000001},
+ {0x0F00700c,0x00000000},
+ {0x0F007010,0x01000000},
+ {0x0F007014,0x01000100},
+ {0x0F007018,0x01000000},
+ {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
+ {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F007024,0x02000007},
+ {0x0F007028,0x02020202},
+ {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F007030,0x05000000},
+ {0x0F007034,0x00000003},
+ {0x0F007038,0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
+ {0x0F00703C,0x02101010},//ROB - 0x02101010,//0x02101018},
+ {0x0F007040,0x45751200},//ROB - 0x45751200,//0x450f1200},
+ {0x0F007044,0x110a0d00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007048,0x081b0306},
+ {0x0F00704c,0x00000000},
+ {0x0F007050,0x0000001c},
+ {0x0F007054,0x00000000},
+ {0x0F007058,0x00000000},
+ {0x0F00705c,0x00000000},
+ {0x0F007060,0x0010246c},
+ {0x0F007064,0x00000010},
+ {0x0F007068,0x00000000},
+ {0x0F00706c,0x00000001},
+ {0x0F007070,0x00007000},
+ {0x0F007074,0x00000000},
+ {0x0F007078,0x00000000},
+ {0x0F00707C,0x00000000},
+ {0x0F007080,0x00000000},
+ {0x0F007084,0x00000000},
//# Enable BW improvement within memory controller
- {0x0F007094,0x00000104},
+ {0x0F007094,0x00000104},
//# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
+ {0x0F00A000,0x00000016},
//# Enable start bit within memory controller
- {0x0F007018,0x01010000}
+ {0x0F007018,0x01010000}
};
//80Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 //index for 0x0F007000
--
1.8.4
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH 1/5] Staging: bcm: DDRInit: Fixed coding style issue, replaced spaces w/ tabs.(patch set)
2013-12-05 0:26 [PATCH 1/5] Staging: bcm: DDRInit: Fixed coding style issue, replaced spaces w/ tabs.(patch set) Gary Rookard
@ 2013-12-05 8:57 ` Dan Carpenter
0 siblings, 0 replies; 2+ messages in thread
From: Dan Carpenter @ 2013-12-05 8:57 UTC (permalink / raw)
To: Gary Rookard; +Cc: gregkh, devel, lisa, linux-kernel
These five patches all do the same thing. It's ok to merge them into
one patch.
The subject lines are all the same and that's not ok. The subject lines
are too long as well.
On Wed, Dec 04, 2013 at 07:26:19PM -0500, Gary Rookard wrote:
> This is the first patch of a series.
Don't put this in the description.
> Replaced spaces in margin w/ 1 tab for lines:
> 11-15, 17-23, 25-58, 60, 62, 64
>
No signed off by line.
> On branch staging-next
Put this between the --- and the diffstat.
> ---
<-- here.
> drivers/staging/bcm/DDRInit.c | 98 +++++++++++++++++++++----------------------
> 1 file changed, 49 insertions(+), 49 deletions(-)
regards,
dan carpenter
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-12-05 8:57 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-12-05 0:26 [PATCH 1/5] Staging: bcm: DDRInit: Fixed coding style issue, replaced spaces w/ tabs.(patch set) Gary Rookard
2013-12-05 8:57 ` Dan Carpenter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome