[PATCH 1/2] regulator: s5m8767: Allow GPIO 0 to be used as external control

[PATCH 1/2] regulator: s5m8767: Allow GPIO 0 to be used as external control

[Krzysztof Kozlowski]

GPIO 0 is a valid GPIO so allow using it as external control for
regulator.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/regulator/s5m8767.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 5daa06626f16..c79af943a5c0 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -528,16 +528,6 @@ static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev,
 	return 0;
 }
 
-static void s5m8767_pmic_dt_parse_ext_control_gpio(struct sec_pmic_dev *iodev,
-		struct sec_regulator_data *rdata,
-		struct device_node *reg_np)
-{
-	rdata->ext_control_gpio = of_get_named_gpio(reg_np,
-			"s5m8767,pmic-ext-control-gpios", 0);
-	if (!gpio_is_valid(rdata->ext_control_gpio))
-		rdata->ext_control_gpio = 0;
-}
-
 static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
 					struct sec_platform_data *pdata)
 {
@@ -586,7 +576,8 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
 			continue;
 		}
 
-		s5m8767_pmic_dt_parse_ext_control_gpio(iodev, rdata, reg_np);
+		rdata->ext_control_gpio = of_get_named_gpio(reg_np,
+			"s5m8767,pmic-ext-control-gpios", 0);
 
 		rdata->id = i;
 		rdata->initdata = of_get_regulator_init_data(
@@ -959,8 +950,9 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
 		config.driver_data = s5m8767;
 		config.regmap = iodev->regmap_pmic;
 		config.of_node = pdata->regulators[i].reg_node;
-		config.ena_gpio = config.ena_gpio_flags = 0;
-		if (pdata->regulators[i].ext_control_gpio)
+		config.ena_gpio = -EINVAL;
+		config.ena_gpio_flags = 0;
+		if (gpio_is_valid(pdata->regulators[i].ext_control_gpio))
 			s5m8767_regulator_config_ext_control(s5m8767,
 					&pdata->regulators[i], &config);
 
@@ -973,7 +965,7 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
 			return ret;
 		}
 
-		if (pdata->regulators[i].ext_control_gpio) {
+		if (gpio_is_valid(pdata->regulators[i].ext_control_gpio)) {
 			ret = s5m8767_enable_ext_control(s5m8767, rdev);
 			if (ret < 0) {
 				dev_err(s5m8767->dev,
-- 
1.9.1

[PATCH 2/2] regulator: s2mps11: Allow GPIO 0 to be used as external control on S2MPS14

[Krzysztof Kozlowski]

GPIO 0 is a valid GPIO so allow using it as external control for
S2MPS14 regulators.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/regulator/s2mps11.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 6dad0aa74a47..1583d4eaf911 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -412,7 +412,7 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
 
 	if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
 		val = S2MPS14_ENABLE_SUSPEND;
-	else if (s2mps11->ext_control_gpio[rdev_get_id(rdev)])
+	else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
 		val = S2MPS14_ENABLE_EXT_CONTROL;
 	else
 		val = rdev->desc->enable_mask;
@@ -593,9 +593,7 @@ static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
 
 		gpio[reg] = of_get_named_gpio(rdata[reg].of_node,
 				"samsung,ext-control-gpios", 0);
-		if (!gpio_is_valid(gpio[reg]))
-			gpio[reg] = 0;
-		else
+		if (gpio_is_valid(gpio[reg]))
 			dev_dbg(&pdev->dev, "Using GPIO %d for ext-control over %d/%s\n",
 					gpio[reg], reg, rdata[reg].name);
 	}
@@ -658,6 +656,12 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 			GFP_KERNEL);
 	if (!s2mps11->ext_control_gpio)
 		return -ENOMEM;
+	/*
+	 * 0 is a valid GPIO so initialize all GPIO-s to negative value
+	 * to indicate that external control won't be used for this regulator.
+	 */
+	for (i = 0; i < s2mps11->rdev_num; i++)
+		s2mps11->ext_control_gpio[i] = -EINVAL;
 
 	if (!iodev->dev->of_node) {
 		if (iodev->pdata) {
@@ -687,6 +691,7 @@ common_reg:
 	config.dev = &pdev->dev;
 	config.regmap = iodev->regmap_pmic;
 	config.driver_data = s2mps11;
+	config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
 	for (i = 0; i < s2mps11->rdev_num; i++) {
 		struct regulator_dev *regulator;
 
@@ -697,12 +702,7 @@ common_reg:
 			config.init_data = rdata[i].init_data;
 			config.of_node = rdata[i].of_node;
 		}
-
-		if (s2mps11->ext_control_gpio[i]) {
-			config.ena_gpio = s2mps11->ext_control_gpio[i];
-			config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
-		} else
-			config.ena_gpio = config.ena_gpio_flags = 0;
+		config.ena_gpio = s2mps11->ext_control_gpio[i];
 
 		regulator = devm_regulator_register(&pdev->dev,
 						&regulators[i], &config);
@@ -713,7 +713,7 @@ common_reg:
 			goto out;
 		}
 
-		if (s2mps11->ext_control_gpio[i]) {
+		if (gpio_is_valid(s2mps11->ext_control_gpio[i])) {
 			ret = s2mps14_pmic_enable_ext_control(s2mps11,
 					regulator);
 			if (ret < 0) {
-- 
1.9.1

Re: [PATCH 1/2] regulator: s5m8767: Allow GPIO 0 to be used as external control

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 655 bytes --]

On Wed, Apr 30, 2014 at 10:40:41AM +0200, Krzysztof Kozlowski wrote:
> GPIO 0 is a valid GPIO so allow using it as external control for
> regulator.

Applied, thanks.  This is only safe because we don't have any actual
users of platform data - if we do have users of platform data then
things get a bit more tricky since the expectation with platform data is
that zero is the default/do nothing case.

Really if this is an issue it is better to fix things so that GPIO 0
doesn't get used for anything, with DT there's no need to do that since 
the numbers are all dynamic but it does get a little more tricky in the
platform data case sadly.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 2/2] regulator: s2mps11: Allow GPIO 0 to be used as external control on S2MPS14

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 176 bytes --]

On Wed, Apr 30, 2014 at 10:40:42AM +0200, Krzysztof Kozlowski wrote:
> GPIO 0 is a valid GPIO so allow using it as external control for
> S2MPS14 regulators.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]