From: "Peter Hüwe" <PeterHuewe@gmx.de>
To: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Ashley Lai <ashley@ashleylai.com>,
Marcel Selhorst <tpmdd@selhorst.net>,
tpmdd-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org,
josh.triplett@intel.com, christophe.ricard@gmail.com,
jason.gunthorpe@obsidianresearch.com, linux-api@vger.kernel.org,
trousers-tech@lists.sourceforge.net,
Will Arthur <will.c.arthur@intel.com>
Subject: Re: [PATCH v9 6/8] tpm: TPM 2.0 baseline support
Date: Fri, 5 Dec 2014 00:17:40 +0100 [thread overview]
Message-ID: <201412050017.40668.PeterHuewe@gmx.de> (raw)
In-Reply-To: <1417672518-4530-7-git-send-email-jarkko.sakkinen@linux.intel.com>
Am Donnerstag, 4. Dezember 2014, 06:55:16 schrieb Jarkko Sakkinen:
> TPM 2.0 devices are separated by adding a field 'flags' to struct
> tpm_chip and defining a flag TPM_CHIP_FLAG_TPM2 for tagging them.
>
> This patch adds the following internal functions:
>
> - tpm2_get_random()
> - tpm2_get_tpm_pt()
> - tpm2_pcr_extend()
> - tpm2_pcr_read()
> - tpm2_startup()
>
> Additionally, the following exported functions are implemented for
> implementing TPM 2.0 device drivers:
>
> - tpm2_do_selftest()
> - tpm2_calc_ordinal_durations()
> - tpm2_gen_interrupt()
>
> The existing functions that are exported for the use for existing
> subsystems have been changed to check the flags field in struct
> tpm_chip and use appropriate TPM 2.0 counterpart if
> TPM_CHIP_FLAG_TPM2 is est.
>
> The code for tpm2_calc_ordinal_duration() and tpm2_startup() were
> originally written by Will Arthur.
>
> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> Signed-off-by: Will Arthur <will.c.arthur@intel.com>
> ---
> drivers/char/tpm/Makefile | 2 +-
> drivers/char/tpm/tpm-chip.c | 27 +-
> drivers/char/tpm/tpm-interface.c | 24 +-
> drivers/char/tpm/tpm.h | 61 +++++
> drivers/char/tpm/tpm2-cmd.c | 542
> +++++++++++++++++++++++++++++++++++++++ 5 files changed, 641
> insertions(+), 15 deletions(-)
> create mode 100644 drivers/char/tpm/tpm2-cmd.c
>
> diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
> index c715596..88848ed 100644
> --- a/drivers/char/tpm/Makefile
> +++ b/drivers/char/tpm/Makefile
> @@ -2,7 +2,7 @@
> # Makefile for the kernel tpm device drivers.
> #
> obj-$(CONFIG_TCG_TPM) += tpm.o
> -tpm-y := tpm-interface.o tpm-dev.o tpm-sysfs.o tpm-chip.o
> +tpm-y := tpm-interface.o tpm-dev.o tpm-sysfs.o tpm-chip.o tpm2-cmd.o
> tpm-$(CONFIG_ACPI) += tpm_ppi.o
>
> ifdef CONFIG_ACPI
> diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
> index 7741e28..3f3f2de 100644
> --- a/drivers/char/tpm/tpm-chip.c
> +++ b/drivers/char/tpm/tpm-chip.c
> @@ -195,15 +195,18 @@ int tpm_chip_register(struct tpm_chip *chip)
> if (rc)
> return rc;
>
> - rc = tpm_sysfs_add_device(chip);
> - if (rc)
> - goto del_misc;
> + /* Populate sysfs for TPM1 devices. */
> + if (!(chip->flags & TPM_CHIP_FLAG_TPM2)) {
> + rc = tpm_sysfs_add_device(chip);
> + if (rc)
> + goto del_misc;
>
> - rc = tpm_add_ppi(chip);
> - if (rc)
> - goto del_sysfs;
> + rc = tpm_add_ppi(chip);
> + if (rc)
> + goto del_sysfs;
>
> - chip->bios_dir = tpm_bios_log_setup(chip->devname);
> + chip->bios_dir = tpm_bios_log_setup(chip->devname);
> + }
>
> /* Make the chip available. */
> spin_lock(&driver_lock);
> @@ -236,10 +239,12 @@ void tpm_chip_unregister(struct tpm_chip *chip)
> spin_unlock(&driver_lock);
> synchronize_rcu();
>
> - if (chip->bios_dir)
> - tpm_bios_log_teardown(chip->bios_dir);
> - tpm_remove_ppi(chip);
> - tpm_sysfs_del_device(chip);
> + if (!(chip->flags & TPM_CHIP_FLAG_TPM2)) {
> + if (chip->bios_dir)
> + tpm_bios_log_teardown(chip->bios_dir);
> + tpm_remove_ppi(chip);
> + tpm_sysfs_del_device(chip);
> + }
>
> tpm_dev_del_device(chip);
> }
> diff --git a/drivers/char/tpm/tpm-interface.c
> b/drivers/char/tpm/tpm-interface.c index b6f6b17..8a14887 100644
> --- a/drivers/char/tpm/tpm-interface.c
> +++ b/drivers/char/tpm/tpm-interface.c
> @@ -360,7 +360,10 @@ ssize_t tpm_transmit(struct tpm_chip *chip, const char
> *buf, if (chip->vendor.irq)
> goto out_recv;
>
> - stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal);
> + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> + stop = jiffies + tpm2_calc_ordinal_duration(chip, ordinal);
> + else
> + stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal);
> do {
> u8 status = chip->ops->status(chip);
> if ((status & chip->ops->req_complete_mask) ==
> @@ -483,7 +486,7 @@ static const struct tpm_input_header tpm_startup_header
> = { static int tpm_startup(struct tpm_chip *chip, __be16 startup_type) {
> struct tpm_cmd_t start_cmd;
> - start_cmd.header.in = tpm_startup_header;
> +
WHY?!? This renders tpm_startup useless.
So NACK for this part.
> start_cmd.params.startup_in.startup_type = startup_type;
> return tpm_transmit_cmd(chip, &start_cmd, TPM_INTERNAL_RESULT_SIZE,
> "attempting to start the TPM");
I'll get you an TPM1.2 :)
Thanks
Peter
next prev parent reply other threads:[~2014-12-04 23:12 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 5:55 [PATCH v9 0/8] TPM 2.0 support Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 1/8] tpm: merge duplicate transmit_cmd() functions Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 2/8] tpm: two-phase chip management functions Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 3/8] tpm: fix raciness of PPI interface lookup Jarkko Sakkinen
2014-12-04 20:34 ` Peter Hüwe
2014-12-04 5:55 ` [PATCH v9 4/8] tpm: rename chip->dev to chip->pdev Jarkko Sakkinen
2014-12-04 20:49 ` Peter Hüwe
2014-12-04 5:55 ` [PATCH v9 5/8] tpm: device class for tpm Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 6/8] tpm: TPM 2.0 baseline support Jarkko Sakkinen
2014-12-04 23:17 ` Peter Hüwe [this message]
2014-12-05 14:13 ` Jarkko Sakkinen
2014-12-05 14:35 ` Aw: " Peter Huewe
2014-12-06 11:54 ` Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 7/8] tpm: TPM 2.0 CRB Interface Jarkko Sakkinen
2014-12-04 20:19 ` Peter Hüwe
2014-12-05 13:10 ` Jarkko Sakkinen
2014-12-04 22:55 ` Peter Hüwe
2014-12-04 5:55 ` [PATCH v9 8/8] tpm: TPM 2.0 FIFO Interface Jarkko Sakkinen
2014-12-04 15:25 ` [tpmdd-devel] " Scot Doyle
2014-12-05 13:05 ` Jarkko Sakkinen
2014-12-04 21:46 ` Peter Hüwe
2014-12-05 13:06 ` Jarkko Sakkinen
2014-12-04 22:18 ` Peter Hüwe
2014-12-04 22:28 ` [tpmdd-devel] " Peter Hüwe
2014-12-05 15:01 ` Aw: " Peter Huewe
2014-12-05 20:44 ` Stefan Berger
2014-12-09 15:47 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201412050017.40668.PeterHuewe@gmx.de \
--to=peterhuewe@gmx.de \
--cc=ashley@ashleylai.com \
--cc=christophe.ricard@gmail.com \
--cc=jarkko.sakkinen@linux.intel.com \
--cc=jason.gunthorpe@obsidianresearch.com \
--cc=josh.triplett@intel.com \
--cc=linux-api@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tpmdd-devel@lists.sourceforge.net \
--cc=tpmdd@selhorst.net \
--cc=trousers-tech@lists.sourceforge.net \
--cc=will.c.arthur@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome