mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: "Peter Hüwe" <PeterHuewe@gmx.de>
Cc: Ashley Lai <ashley@ashleylai.com>,
	Marcel Selhorst <tpmdd@selhorst.net>,
	tpmdd-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org,
	josh.triplett@intel.com, christophe.ricard@gmail.com,
	jason.gunthorpe@obsidianresearch.com, linux-api@vger.kernel.org,
	trousers-tech@lists.sourceforge.net,
	Will Arthur <will.c.arthur@intel.com>
Subject: Re: [PATCH v9 6/8] tpm: TPM 2.0 baseline support
Date: Fri, 5 Dec 2014 16:13:03 +0200	[thread overview]
Message-ID: <20141205141303.GF6993@intel.com> (raw)
In-Reply-To: <201412050017.40668.PeterHuewe@gmx.de>

Hey

is it cool if I prepare a separate set of fixes for all issues
in v9? I do not see any problem that could not be fixed without
major structural changes.

/Jarkko

On Fri, Dec 05, 2014 at 12:17:40AM +0100, Peter Hüwe wrote:
> Am Donnerstag, 4. Dezember 2014, 06:55:16 schrieb Jarkko Sakkinen:
> > TPM 2.0 devices are separated by adding a field 'flags' to struct
> > tpm_chip and defining a flag TPM_CHIP_FLAG_TPM2 for tagging them.
> > 
> > This patch adds the following internal functions:
> > 
> > - tpm2_get_random()
> > - tpm2_get_tpm_pt()
> > - tpm2_pcr_extend()
> > - tpm2_pcr_read()
> > - tpm2_startup()
> > 
> > Additionally, the following exported functions are implemented for
> > implementing TPM 2.0 device drivers:
> > 
> > - tpm2_do_selftest()
> > - tpm2_calc_ordinal_durations()
> > - tpm2_gen_interrupt()
> > 
> > The existing functions that are exported for the use for existing
> > subsystems have been changed to check the flags field in struct
> > tpm_chip and use appropriate TPM 2.0 counterpart if
> > TPM_CHIP_FLAG_TPM2 is est.
> > 
> > The code for tpm2_calc_ordinal_duration() and tpm2_startup() were
> > originally written by Will Arthur.
> > 
> > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> > Signed-off-by: Will Arthur <will.c.arthur@intel.com>
> > ---
> >  drivers/char/tpm/Makefile        |   2 +-
> >  drivers/char/tpm/tpm-chip.c      |  27 +-
> >  drivers/char/tpm/tpm-interface.c |  24 +-
> >  drivers/char/tpm/tpm.h           |  61 +++++
> >  drivers/char/tpm/tpm2-cmd.c      | 542
> > +++++++++++++++++++++++++++++++++++++++ 5 files changed, 641
> > insertions(+), 15 deletions(-)
> >  create mode 100644 drivers/char/tpm/tpm2-cmd.c
> > 
> > diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
> > index c715596..88848ed 100644
> > --- a/drivers/char/tpm/Makefile
> > +++ b/drivers/char/tpm/Makefile
> > @@ -2,7 +2,7 @@
> >  # Makefile for the kernel tpm device drivers.
> >  #
> >  obj-$(CONFIG_TCG_TPM) += tpm.o
> > -tpm-y := tpm-interface.o tpm-dev.o tpm-sysfs.o tpm-chip.o
> > +tpm-y := tpm-interface.o tpm-dev.o tpm-sysfs.o tpm-chip.o tpm2-cmd.o
> >  tpm-$(CONFIG_ACPI) += tpm_ppi.o
> > 
> >  ifdef CONFIG_ACPI
> > diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
> > index 7741e28..3f3f2de 100644
> > --- a/drivers/char/tpm/tpm-chip.c
> > +++ b/drivers/char/tpm/tpm-chip.c
> > @@ -195,15 +195,18 @@ int tpm_chip_register(struct tpm_chip *chip)
> >  	if (rc)
> >  		return rc;
> > 
> > -	rc = tpm_sysfs_add_device(chip);
> > -	if (rc)
> > -		goto del_misc;
> > +	/* Populate sysfs for TPM1 devices. */
> > +	if (!(chip->flags & TPM_CHIP_FLAG_TPM2)) {
> > +		rc = tpm_sysfs_add_device(chip);
> > +		if (rc)
> > +			goto del_misc;
> > 
> > -	rc = tpm_add_ppi(chip);
> > -	if (rc)
> > -		goto del_sysfs;
> > +		rc = tpm_add_ppi(chip);
> > +		if (rc)
> > +			goto del_sysfs;
> > 
> > -	chip->bios_dir = tpm_bios_log_setup(chip->devname);
> > +		chip->bios_dir = tpm_bios_log_setup(chip->devname);
> > +	}
> > 
> >  	/* Make the chip available. */
> >  	spin_lock(&driver_lock);
> > @@ -236,10 +239,12 @@ void tpm_chip_unregister(struct tpm_chip *chip)
> >  	spin_unlock(&driver_lock);
> >  	synchronize_rcu();
> > 
> > -	if (chip->bios_dir)
> > -		tpm_bios_log_teardown(chip->bios_dir);
> > -	tpm_remove_ppi(chip);
> > -	tpm_sysfs_del_device(chip);
> > +	if (!(chip->flags & TPM_CHIP_FLAG_TPM2)) {
> > +		if (chip->bios_dir)
> > +			tpm_bios_log_teardown(chip->bios_dir);
> > +		tpm_remove_ppi(chip);
> > +		tpm_sysfs_del_device(chip);
> > +	}
> > 
> >  	tpm_dev_del_device(chip);
> >  }
> > diff --git a/drivers/char/tpm/tpm-interface.c
> > b/drivers/char/tpm/tpm-interface.c index b6f6b17..8a14887 100644
> > --- a/drivers/char/tpm/tpm-interface.c
> > +++ b/drivers/char/tpm/tpm-interface.c
> > @@ -360,7 +360,10 @@ ssize_t tpm_transmit(struct tpm_chip *chip, const char
> > *buf, if (chip->vendor.irq)
> >  		goto out_recv;
> > 
> > -	stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal);
> > +	if (chip->flags & TPM_CHIP_FLAG_TPM2)
> > +		stop = jiffies + tpm2_calc_ordinal_duration(chip, ordinal);
> > +	else
> > +		stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal);
> >  	do {
> >  		u8 status = chip->ops->status(chip);
> >  		if ((status & chip->ops->req_complete_mask) ==
> > @@ -483,7 +486,7 @@ static const struct tpm_input_header tpm_startup_header
> > = { static int tpm_startup(struct tpm_chip *chip, __be16 startup_type) {
> >  	struct tpm_cmd_t start_cmd;
> > -	start_cmd.header.in = tpm_startup_header;
> > +
> WHY?!? This renders tpm_startup useless.
> 
> So NACK for this part.
> >  	start_cmd.params.startup_in.startup_type = startup_type;
> >  	return tpm_transmit_cmd(chip, &start_cmd, TPM_INTERNAL_RESULT_SIZE,
> >  				"attempting to start the TPM");
> 
> I'll get you an TPM1.2 :)
> 
> Thanks
> Peter

  reply	other threads:[~2014-12-05 14:14 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-04  5:55 [PATCH v9 0/8] TPM 2.0 support Jarkko Sakkinen
2014-12-04  5:55 ` [PATCH v9 1/8] tpm: merge duplicate transmit_cmd() functions Jarkko Sakkinen
2014-12-04  5:55 ` [PATCH v9 2/8] tpm: two-phase chip management functions Jarkko Sakkinen
2014-12-04  5:55 ` [PATCH v9 3/8] tpm: fix raciness of PPI interface lookup Jarkko Sakkinen
2014-12-04 20:34   ` Peter Hüwe
2014-12-04  5:55 ` [PATCH v9 4/8] tpm: rename chip->dev to chip->pdev Jarkko Sakkinen
2014-12-04 20:49   ` Peter Hüwe
2014-12-04  5:55 ` [PATCH v9 5/8] tpm: device class for tpm Jarkko Sakkinen
2014-12-04  5:55 ` [PATCH v9 6/8] tpm: TPM 2.0 baseline support Jarkko Sakkinen
2014-12-04 23:17   ` Peter Hüwe
2014-12-05 14:13     ` Jarkko Sakkinen [this message]
2014-12-05 14:35       ` Aw: " Peter Huewe
2014-12-06 11:54         ` Jarkko Sakkinen
2014-12-04  5:55 ` [PATCH v9 7/8] tpm: TPM 2.0 CRB Interface Jarkko Sakkinen
2014-12-04 20:19   ` Peter Hüwe
2014-12-05 13:10     ` Jarkko Sakkinen
2014-12-04 22:55   ` Peter Hüwe
2014-12-04  5:55 ` [PATCH v9 8/8] tpm: TPM 2.0 FIFO Interface Jarkko Sakkinen
2014-12-04 15:25   ` [tpmdd-devel] " Scot Doyle
2014-12-05 13:05     ` Jarkko Sakkinen
2014-12-04 21:46   ` Peter Hüwe
2014-12-05 13:06     ` Jarkko Sakkinen
2014-12-04 22:18   ` Peter Hüwe
2014-12-04 22:28     ` [tpmdd-devel] " Peter Hüwe
2014-12-05 15:01       ` Aw: " Peter Huewe
2014-12-05 20:44         ` Stefan Berger
2014-12-09 15:47         ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141205141303.GF6993@intel.com \
    --to=jarkko.sakkinen@linux.intel.com \
    --cc=PeterHuewe@gmx.de \
    --cc=ashley@ashleylai.com \
    --cc=christophe.ricard@gmail.com \
    --cc=jason.gunthorpe@obsidianresearch.com \
    --cc=josh.triplett@intel.com \
    --cc=linux-api@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tpmdd-devel@lists.sourceforge.net \
    --cc=tpmdd@selhorst.net \
    --cc=trousers-tech@lists.sourceforge.net \
    --cc=will.c.arthur@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome