From: Scot Doyle <lkml14@scotdoyle.com>
To: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>,
Ashley Lai <ashley@ashleylai.com>,
Marcel Selhorst <tpmdd@selhorst.net>,
christophe.ricard@gmail.com, josh.triplett@intel.com,
linux-api@vger.kernel.org, linux-kernel@vger.kernel.org,
Will Arthur <will.c.arthur@intel.com>,
tpmdd-devel@lists.sourceforge.net,
jason.gunthorpe@obsidianresearch.com,
trousers-tech@lists.sourceforge.net
Subject: Re: [tpmdd-devel] [PATCH v9 8/8] tpm: TPM 2.0 FIFO Interface
Date: Thu, 4 Dec 2014 15:25:12 +0000 (UTC) [thread overview]
Message-ID: <alpine.DEB.2.11.1412041459470.5705@localhost.localdomain> (raw)
In-Reply-To: <1417672518-4530-9-git-send-email-jarkko.sakkinen@linux.intel.com>
Hi Jarkko,
On Thu, 4 Dec 2014, Jarkko Sakkinen wrote:
> From: Will Arthur <will.c.arthur@intel.com>
>
> Detect TPM 2.0 by using the extended STS (STS3) register. For TPM 2.0,
> instead of calling tpm_get_timeouts(), assign duration and timeout
> values defined in the TPM 2.0 PTP specification.
>
> Signed-off-by: Will Arthur <will.c.arthur@intel.com>
> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> ---
> drivers/char/tpm/tpm_tis.c | 80 ++++++++++++++++++++++++++++++++++++++--------
> 1 file changed, 67 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index 89e1abb..71cbb2d 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -1,5 +1,6 @@
> /*
> * Copyright (C) 2005, 2006 IBM Corporation
> + * Copyright (C) 2014 Intel Corporation
> *
> * Authors:
> * Leendert van Doorn <leendert@watson.ibm.com>
> @@ -44,6 +45,10 @@ enum tis_status {
> TPM_STS_DATA_EXPECT = 0x08,
> };
>
> +enum tis_status3 {
> + TPM_STS3_TPM2_FAM = 0x04,
> +};
> +
> enum tis_int_flags {
> TPM_GLOBAL_INT_ENABLE = 0x80000000,
> TPM_INTF_BURST_COUNT_STATIC = 0x100,
> @@ -70,6 +75,7 @@ enum tis_defaults {
> #define TPM_INT_STATUS(l) (0x0010 | ((l) << 12))
> #define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12))
> #define TPM_STS(l) (0x0018 | ((l) << 12))
> +#define TPM_STS3(l) (0x001b | ((l) << 12))
> #define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12))
>
> #define TPM_DID_VID(l) (0x0F00 | ((l) << 12))
> @@ -363,6 +369,7 @@ static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
> {
> int rc;
> u32 ordinal;
> + unsigned long dur;
>
> rc = tpm_tis_send_data(chip, buf, len);
> if (rc < 0)
> @@ -374,9 +381,14 @@ static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
>
> if (chip->vendor.irq) {
> ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
> +
> + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> + dur = tpm2_calc_ordinal_duration(chip, ordinal);
> + else
> + dur = tpm_calc_ordinal_duration(chip, ordinal);
> +
> if (wait_for_tpm_stat
> - (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID,
> - tpm_calc_ordinal_duration(chip, ordinal),
> + (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur,
> &chip->vendor.read_queue, false) < 0) {
> rc = -ETIME;
> goto out_err;
> @@ -588,6 +600,7 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> int rc, i, irq_s, irq_e, probe;
> struct tpm_chip *chip;
> struct priv_data *priv;
> + u8 sts3;
>
> priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
> if (priv == NULL)
> @@ -604,11 +617,28 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> if (!chip->vendor.iobase)
> return -EIO;
>
> + sts3 = ioread8(chip->vendor.iobase + TPM_STS3(1));
> + if ((sts3 & TPM_STS3_TPM2_FAM) == TPM_STS3_TPM2_FAM)
> + chip->flags = TPM_CHIP_FLAG_TPM2;
> +
> /* Default timeouts */
> - chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> - chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
> - chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> - chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> + if (chip->flags & TPM_CHIP_FLAG_TPM2) {
> + chip->vendor.timeout_a = usecs_to_jiffies(TPM2_TIMEOUT_A);
> + chip->vendor.timeout_b = usecs_to_jiffies(TPM2_TIMEOUT_B);
> + chip->vendor.timeout_c = usecs_to_jiffies(TPM2_TIMEOUT_C);
> + chip->vendor.timeout_d = usecs_to_jiffies(TPM2_TIMEOUT_D);
> + chip->vendor.duration[TPM_SHORT] =
> + usecs_to_jiffies(TPM2_DURATION_SHORT);
> + chip->vendor.duration[TPM_MEDIUM] =
> + usecs_to_jiffies(TPM2_DURATION_MEDIUM);
> + chip->vendor.duration[TPM_LONG] =
> + usecs_to_jiffies(TPM2_DURATION_LONG);
> + } else {
> + chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> + chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
> + chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> + chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
> + }
>
> if (wait_startup(chip, 0) != 0) {
> rc = -ENODEV;
> @@ -623,8 +653,8 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
> chip->vendor.manufacturer_id = vendor;
>
> - dev_info(dev,
> - "1.2 TPM (device-id 0x%X, rev-id %d)\n",
> + dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
> + (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
> vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
>
> if (!itpm) {
> @@ -665,6 +695,23 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
> dev_dbg(dev, "\tData Avail Int Support\n");
>
> + /* get the timeouts before testing for irqs */
> + if (!(chip->flags & TPM_CHIP_FLAG_TPM2) && tpm_get_timeouts(chip)) {
> + dev_err(dev, "Could not get TPM timeouts and durations\n");
> + rc = -ENODEV;
> + goto out_err;
> + }
> +
> + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> + rc = tpm2_do_selftest(chip);
> + else
> + rc = tpm_do_selftest(chip);
> + if (rc) {
> + dev_err(dev, "TPM self test failed\n");
> + rc = -ENODEV;
> + goto out_err;
> + }
> +
> /* INTERRUPT Setup */
> init_waitqueue_head(&chip->vendor.read_queue);
> init_waitqueue_head(&chip->vendor.int_queue);
In Peter's for-james branch, commit 0e6cb01, the v1.2 calls to
tpm_get_timeouts and tpm_do_selftest were moved toward the end of
tpm_tis_init.
> @@ -720,7 +767,10 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
> chip->vendor.probed_irq = 0;
>
> /* Generate Interrupts */
> - tpm_gen_interrupt(chip);
> + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> + tpm2_gen_interrupt(chip);
> + else
> + tpm_gen_interrupt(chip);
>
> chip->vendor.irq = chip->vendor.probed_irq;
>
> @@ -808,14 +858,18 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
> static int tpm_tis_resume(struct device *dev)
> {
> struct tpm_chip *chip = dev_get_drvdata(dev);
> - int ret;
> + int ret = 0;
>
> if (chip->vendor.irq)
> tpm_tis_reenable_interrupts(chip);
>
> - ret = tpm_pm_resume(dev);
> - if (!ret)
> - tpm_do_selftest(chip);
> + if (chip->flags & TPM_CHIP_FLAG_TPM2)
> + tpm2_do_selftest(chip);
> + else {
> + ret = tpm_pm_resume(dev);
> + if (!ret)
> + tpm_do_selftest(chip);
> + }
>
> return ret;
> }
> --
> 2.1.0
>
next prev parent reply other threads:[~2014-12-04 15:36 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 5:55 [PATCH v9 0/8] TPM 2.0 support Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 1/8] tpm: merge duplicate transmit_cmd() functions Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 2/8] tpm: two-phase chip management functions Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 3/8] tpm: fix raciness of PPI interface lookup Jarkko Sakkinen
2014-12-04 20:34 ` Peter Hüwe
2014-12-04 5:55 ` [PATCH v9 4/8] tpm: rename chip->dev to chip->pdev Jarkko Sakkinen
2014-12-04 20:49 ` Peter Hüwe
2014-12-04 5:55 ` [PATCH v9 5/8] tpm: device class for tpm Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 6/8] tpm: TPM 2.0 baseline support Jarkko Sakkinen
2014-12-04 23:17 ` Peter Hüwe
2014-12-05 14:13 ` Jarkko Sakkinen
2014-12-05 14:35 ` Aw: " Peter Huewe
2014-12-06 11:54 ` Jarkko Sakkinen
2014-12-04 5:55 ` [PATCH v9 7/8] tpm: TPM 2.0 CRB Interface Jarkko Sakkinen
2014-12-04 20:19 ` Peter Hüwe
2014-12-05 13:10 ` Jarkko Sakkinen
2014-12-04 22:55 ` Peter Hüwe
2014-12-04 5:55 ` [PATCH v9 8/8] tpm: TPM 2.0 FIFO Interface Jarkko Sakkinen
2014-12-04 15:25 ` Scot Doyle [this message]
2014-12-05 13:05 ` [tpmdd-devel] " Jarkko Sakkinen
2014-12-04 21:46 ` Peter Hüwe
2014-12-05 13:06 ` Jarkko Sakkinen
2014-12-04 22:18 ` Peter Hüwe
2014-12-04 22:28 ` [tpmdd-devel] " Peter Hüwe
2014-12-05 15:01 ` Aw: " Peter Huewe
2014-12-05 20:44 ` Stefan Berger
2014-12-09 15:47 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.11.1412041459470.5705@localhost.localdomain \
--to=lkml14@scotdoyle.com \
--cc=ashley@ashleylai.com \
--cc=christophe.ricard@gmail.com \
--cc=jarkko.sakkinen@linux.intel.com \
--cc=jason.gunthorpe@obsidianresearch.com \
--cc=josh.triplett@intel.com \
--cc=linux-api@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peterhuewe@gmx.de \
--cc=tpmdd-devel@lists.sourceforge.net \
--cc=tpmdd@selhorst.net \
--cc=trousers-tech@lists.sourceforge.net \
--cc=will.c.arthur@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®