mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nicolai Stange <nicstange@gmail.com>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>,
	linux-kernel@vger.kernel.org,
	Nicolai Stange <nicstange@gmail.com>
Subject: [RFC v8 24/28] clockevents: make setting of ->mult and ->mult_adjusted atomic
Date: Sat, 19 Nov 2016 17:10:32 +0100	[thread overview]
Message-ID: <20161119161036.12679-13-nicstange@gmail.com> (raw)
In-Reply-To: <20161119160055.12491-1-nicstange@gmail.com>

In order to avoid races between setting a struct clock_event_device's
->mult_adjusted in clockevents_update_freq() and yet to be implemented
updates triggered from the timekeeping core, the setting of ->mult and
->mult_adjusted should be made atomic.

Protect the update in clockevents_update_freq() by locking the
clockevents_lock spinlock. Frequency updates are expected to be done
seldomly and thus, taking this subsystem lock should not have any impact
on performance.

Note that the call to tick_broadcast_update_freq() is also protected
by this clockevents_lock and thus, this patch can take the
tick_broadcast_lock with the clockevents_lock being held. However,
this is supposed to be safe since the sequence
  __clockevents_unbind() -> clockevents_replace() ->
  tick_install_replacement() -> tick_setup_device() ->
  tick_device_uses_broadcast()
already does this, too.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
---
 kernel/time/clockevents.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index d9a53af..7dd71bb 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -658,11 +658,11 @@ int clockevents_update_freq(struct clock_event_device *dev, u32 freq)
 	unsigned long flags;
 	int ret;
 
-	local_irq_save(flags);
+	raw_spin_lock_irqsave(&clockevents_lock, flags);
 	ret = tick_broadcast_update_freq(dev, freq);
 	if (ret == -ENODEV)
 		ret = __clockevents_update_freq(dev, freq);
-	local_irq_restore(flags);
+	raw_spin_unlock_irqrestore(&clockevents_lock, flags);
 	return ret;
 }
 
-- 
2.10.2

  parent reply	other threads:[~2016-11-19 16:12 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-19 16:00 [RFC v8 00/28] adapt clockevents frequencies to mono clock Nicolai Stange
2016-11-19 16:00 ` [RFC v8 01/28] clocksource: sh_cmt: compute rate before registration again Nicolai Stange
2016-11-19 16:00 ` [RFC v8 02/28] clocksource: sh_tmu: " Nicolai Stange
2016-11-19 16:00 ` [RFC v8 03/28] clocksource: em_sti: split clock prepare and enable steps Nicolai Stange
2016-11-19 16:00 ` [RFC v8 04/28] clocksource: em_sti: compute rate before registration Nicolai Stange
2016-11-19 16:00 ` [RFC v8 05/28] clocksource: h8300_timer8: don't reset rate in ->set_state_oneshot() Nicolai Stange
2016-11-19 16:00 ` [RFC v8 06/28] clockevents: make clockevents_config() static Nicolai Stange
2016-11-19 16:00 ` [RFC v8 07/28] many clockevent drivers: set ->min_delta_ticks and ->max_delta_ticks Nicolai Stange
2016-11-19 16:00 ` [RFC v8 08/28] arch/s390/kernel/time: " Nicolai Stange
2016-11-19 16:00 ` [RFC v8 09/28] arch/x86/platform/uv/uv_time: " Nicolai Stange
2016-11-19 16:00 ` [RFC v8 10/28] arch/tile/kernel/time: " Nicolai Stange
2016-11-19 16:00 ` [RFC v8 11/28] clockevents: always initialize ->min_delta_ns and ->max_delta_ns Nicolai Stange
2016-11-19 16:10 ` [RFC v8 12/28] many clockevent drivers: don't set " Nicolai Stange
2016-11-19 16:10 ` [RFC v8 13/28] clockevents: do comparison of delta against minimum in terms of cycles Nicolai Stange
2016-11-19 16:10 ` [RFC v8 14/28] clockevents: clockevents_program_min_delta(): don't set ->next_event Nicolai Stange
2016-11-19 16:10 ` [RFC v8 15/28] clockevents: use ->min_delta_ticks_adjusted to program minimum delta Nicolai Stange
2016-11-19 16:10 ` [RFC v8 16/28] clockevents: min delta increment: calculate min_delta_ns from ticks Nicolai Stange
2016-11-19 16:10 ` [RFC v8 17/28] timer_list: print_tickdevice(): calculate ->min_delta_ns dynamically Nicolai Stange
2016-11-19 16:10 ` [RFC v8 18/28] clockevents: purge ->min_delta_ns Nicolai Stange
2016-11-19 16:10 ` [RFC v8 19/28] clockevents: introduce CLOCK_EVT_FEAT_NO_ADJUST flag Nicolai Stange
2016-11-19 16:10 ` [RFC v8 20/28] clockevents: degrade ->min_delta_ticks to unsigned int Nicolai Stange
2016-11-19 16:10 ` [RFC v8 21/28] clockevents: pack ->state_use_accessors and ->features together Nicolai Stange
2016-11-19 16:10 ` [RFC v8 22/28] clockevents: decouple ->max_delta_ns from ->max_delta_ticks Nicolai Stange
2016-11-19 16:10 ` [RFC v8 23/28] clockevents: initial support for mono to raw time conversion Nicolai Stange
2016-11-19 16:10 ` Nicolai Stange [this message]
2016-11-19 16:10 ` [RFC v8 25/28] timekeeping: inform clockevents about freq adjustments Nicolai Stange
2016-11-19 16:10 ` [RFC v8 26/28] clockevents: degrade ->retries to unsigned int Nicolai Stange
2016-11-19 16:10 ` [RFC v8 27/28] clockevents: optimize struct clock_event_device layout Nicolai Stange
2016-11-19 16:10 ` [RFC v8 28/28] clockevents: move non-adjustable devices to the tail of the list Nicolai Stange

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161119161036.12679-13-nicstange@gmail.com \
    --to=nicstange@gmail.com \
    --cc=john.stultz@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®