* [PATCH 1/2] regulator: tps65086: Fix expected switch DT node names
@ 2017-02-10 17:55 Andrew F. Davis
2017-02-10 17:55 ` [PATCH 2/2] regulator: tps65086: Fix DT node referencing in of_parse_cb Andrew F. Davis
0 siblings, 1 reply; 2+ messages in thread
From: Andrew F. Davis @ 2017-02-10 17:55 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown; +Cc: linux-kernel, Andrew F . Davis
The three load switches are called SWA1, SWB1, and SWB2. The
node names describing properties for these are expected to be
the same, but due to a typo they are not. Fix this here.
Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Steven Kipisz <s-kipisz2@ti.com>
---
drivers/regulator/tps65086-regulator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c
index ecb0371780af..84e8cb109269 100644
--- a/drivers/regulator/tps65086-regulator.c
+++ b/drivers/regulator/tps65086-regulator.c
@@ -157,8 +157,8 @@ static struct tps65086_regulator regulators[] = {
VDOA23_VID_MASK, TPS65086_LDOA3CTRL, BIT(0),
tps65086_ldoa23_ranges, 0, 0),
TPS65086_SWITCH("SWA1", "swa1", SWA1, TPS65086_SWVTT_EN, BIT(5)),
- TPS65086_SWITCH("SWB1", "swa2", SWB1, TPS65086_SWVTT_EN, BIT(6)),
- TPS65086_SWITCH("SWB2", "swa3", SWB2, TPS65086_SWVTT_EN, BIT(7)),
+ TPS65086_SWITCH("SWB1", "swb1", SWB1, TPS65086_SWVTT_EN, BIT(6)),
+ TPS65086_SWITCH("SWB2", "swb2", SWB2, TPS65086_SWVTT_EN, BIT(7)),
TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)),
};
--
2.11.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH 2/2] regulator: tps65086: Fix DT node referencing in of_parse_cb
2017-02-10 17:55 [PATCH 1/2] regulator: tps65086: Fix expected switch DT node names Andrew F. Davis
@ 2017-02-10 17:55 ` Andrew F. Davis
0 siblings, 0 replies; 2+ messages in thread
From: Andrew F. Davis @ 2017-02-10 17:55 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown; +Cc: linux-kernel, Andrew F . Davis
When we check for additional DT properties in the current node we
use the device_node passed in with the configuration data, this
will not point to the correct DT node, use the one passed in
for this purpose.
Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Steven Kipisz <s-kipisz2@ti.com>
---
drivers/regulator/tps65086-regulator.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c
index 84e8cb109269..45e96e154690 100644
--- a/drivers/regulator/tps65086-regulator.c
+++ b/drivers/regulator/tps65086-regulator.c
@@ -162,14 +162,14 @@ static struct tps65086_regulator regulators[] = {
TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)),
};
-static int tps65086_of_parse_cb(struct device_node *dev,
+static int tps65086_of_parse_cb(struct device_node *node,
const struct regulator_desc *desc,
struct regulator_config *config)
{
int ret;
/* Check for 25mV step mode */
- if (of_property_read_bool(config->of_node, "ti,regulator-step-size-25mv")) {
+ if (of_property_read_bool(node, "ti,regulator-step-size-25mv")) {
switch (desc->id) {
case BUCK1:
case BUCK2:
@@ -193,7 +193,7 @@ static int tps65086_of_parse_cb(struct device_node *dev,
}
/* Check for decay mode */
- if (desc->id <= BUCK6 && of_property_read_bool(config->of_node, "ti,regulator-decay")) {
+ if (desc->id <= BUCK6 && of_property_read_bool(node, "ti,regulator-decay")) {
ret = regmap_write_bits(config->regmap,
regulators[desc->id].decay_reg,
regulators[desc->id].decay_mask,
--
2.11.0
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-02-10 17:57 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-10 17:55 [PATCH 1/2] regulator: tps65086: Fix expected switch DT node names Andrew F. Davis
2017-02-10 17:55 ` [PATCH 2/2] regulator: tps65086: Fix DT node referencing in of_parse_cb Andrew F. Davis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®