From: Javier Martinez Canillas <javier@osg.samsung.com>
To: linux-kernel@vger.kernel.org
Cc: Javier Martinez Canillas <javier@osg.samsung.com>,
Matt Ranostay <mranostay@gmail.com>,
Giorgio Dal Molin <giorgio.nicole@arcor.de>,
linux-iio@vger.kernel.org, Hartmut Knaack <knaack.h@gmx.de>,
Wei Yongjun <weiyongjun1@huawei.com>,
Bhumika Goyal <bhumirks@gmail.com>,
Lars-Peter Clausen <lars@metafoo.de>,
Daniel Baluta <daniel.baluta@intel.com>,
Jonathan Cameron <jic23@kernel.org>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Subject: [PATCH v2 12/17] iio: adc: ti-ads1015: Add OF device ID table
Date: Wed, 15 Mar 2017 01:45:00 -0300 [thread overview]
Message-ID: <20170315044505.20660-13-javier@osg.samsung.com> (raw)
In-Reply-To: <20170315044505.20660-1-javier@osg.samsung.com>
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
drivers/iio/adc/ti-ads1015.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index 422b314f5a3f..f76d979fb7e8 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -15,6 +15,7 @@
*/
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
@@ -55,7 +56,7 @@
#define ADS1015_DEFAULT_DATA_RATE 4
#define ADS1015_DEFAULT_CHAN 0
-enum {
+enum chip_ids {
ADS1015,
ADS1115,
};
@@ -578,6 +579,7 @@ static int ads1015_probe(struct i2c_client *client,
struct iio_dev *indio_dev;
struct ads1015_data *data;
int ret;
+ enum chip_ids chip;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
@@ -593,7 +595,11 @@ static int ads1015_probe(struct i2c_client *client,
indio_dev->name = ADS1015_DRV_NAME;
indio_dev->modes = INDIO_DIRECT_MODE;
- switch (id->driver_data) {
+ if (client->dev.of_node)
+ chip = (enum chip_ids)of_device_get_match_data(&client->dev);
+ else
+ chip = id->driver_data;
+ switch (chip) {
case ADS1015:
indio_dev->channels = ads1015_channels;
indio_dev->num_channels = ARRAY_SIZE(ads1015_channels);
@@ -698,9 +704,23 @@ static const struct i2c_device_id ads1015_id[] = {
};
MODULE_DEVICE_TABLE(i2c, ads1015_id);
+static const struct of_device_id ads1015_of_match[] = {
+ {
+ .compatible = "ti,ads1015",
+ .data = (void *)ADS1015
+ },
+ {
+ .compatible = "ti,ads1115",
+ .data = (void *)ADS1115
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ads1015_of_match);
+
static struct i2c_driver ads1015_driver = {
.driver = {
.name = ADS1015_DRV_NAME,
+ .of_match_table = ads1015_of_match,
.pm = &ads1015_pm_ops,
},
.probe = ads1015_probe,
--
2.9.3
next prev parent reply other threads:[~2017-03-15 4:46 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-15 4:44 [PATCH v2 00/17] iio: Add OF device table to I2C drivers that are missing it Javier Martinez Canillas
2017-03-15 4:44 ` [PATCH v2 01/17] iio: adc: ina2xx: Add OF device ID table Javier Martinez Canillas
2017-03-19 10:48 ` Jonathan Cameron
2017-03-15 4:44 ` [PATCH v2 02/17] iio: mlx96014: " Javier Martinez Canillas
2017-03-15 10:46 ` Crt Mori
2017-03-19 10:49 ` Jonathan Cameron
2017-03-15 4:44 ` [PATCH v2 03/17] iio: magnetometer: bmc150_magn_i2c: " Javier Martinez Canillas
2017-03-19 10:50 ` Jonathan Cameron
2017-03-15 4:44 ` [PATCH v2 04/17] iio: dac: mcp4725: " Javier Martinez Canillas
2017-03-19 10:51 ` Jonathan Cameron
2017-03-15 4:44 ` [PATCH v2 05/17] iio: light: us5182d: " Javier Martinez Canillas
2017-03-19 10:52 ` Jonathan Cameron
2017-03-15 4:44 ` [PATCH v2 06/17] iio: light: tsl2563: " Javier Martinez Canillas
2017-03-19 10:53 ` Jonathan Cameron
2017-03-15 4:44 ` [PATCH v2 07/17] iio: pressure: hp03: " Javier Martinez Canillas
2017-03-19 10:53 ` Jonathan Cameron
2017-03-15 4:44 ` [PATCH v2 08/17] iio: imu: inv_mpu6050: " Javier Martinez Canillas
2017-03-19 10:54 ` Jonathan Cameron
2017-03-15 4:44 ` [PATCH v2 09/17] iio: accel: bma180: " Javier Martinez Canillas
2017-03-19 10:55 ` Jonathan Cameron
2017-03-15 4:44 ` [PATCH v2 10/17] iio: light: apds9960: " Javier Martinez Canillas
2017-03-19 10:55 ` Jonathan Cameron
2017-03-15 4:44 ` [PATCH v2 11/17] iio: dac: max5821: Set .of_match_table to " Javier Martinez Canillas
2017-03-19 10:56 ` Jonathan Cameron
2017-03-15 4:45 ` Javier Martinez Canillas [this message]
2017-03-19 10:57 ` [PATCH v2 12/17] iio: adc: ti-ads1015: Add " Jonathan Cameron
2017-03-15 4:45 ` [PATCH v2 13/17] iio: magnetometer: mag3110: " Javier Martinez Canillas
2017-03-19 10:57 ` Jonathan Cameron
2017-03-15 4:45 ` [PATCH v2 14/17] iio: accel: mma7455_i2c: " Javier Martinez Canillas
2017-03-19 10:57 ` Jonathan Cameron
2017-03-15 4:45 ` [PATCH v2 15/17] iio: pressure: mpl3115: " Javier Martinez Canillas
2017-03-19 10:58 ` Jonathan Cameron
2017-03-15 4:45 ` [PATCH v2 16/17] iio: accel: mma7660: " Javier Martinez Canillas
2017-03-19 10:58 ` Jonathan Cameron
2017-03-15 4:45 ` [PATCH v2 17/17] iio: gyro: itg3200: " Javier Martinez Canillas
2017-03-19 10:59 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170315044505.20660-13-javier@osg.samsung.com \
--to=javier@osg.samsung.com \
--cc=bhumirks@gmail.com \
--cc=daniel.baluta@intel.com \
--cc=giorgio.nicole@arcor.de \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mranostay@gmail.com \
--cc=pmeerw@pmeerw.net \
--cc=weiyongjun1@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®