From: Lee Jones <lee.jones@linaro.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 01/32] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header
Date: Tue, 11 Apr 2017 17:34:38 +0100 [thread overview]
Message-ID: <20170411163438.yhbe22v34d7chit3@dell> (raw)
In-Reply-To: <3268f5fd-218f-21d4-cc19-39812b58b8ea@ti.com>
On Tue, 11 Apr 2017, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Tuesday 11 April 2017 07:44 PM, Lee Jones wrote:
> > On Mon, 10 Apr 2017, Kishon Vijay Abraham I wrote:
> >
> >> From: Krzysztof Kozlowski <krzk@kernel.org>
> >>
> >> The MFD-specific header will go away because it duplicates defines from
> >> exynos-regs-pmu.h.
> >>
> >> Reported-by: kbuild test robot <fengguang.wu@intel.com>
> >> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> >> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> >> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> >
> >
> > Okay, this is confusing.
> >
> > I'm guessing you're sending this to Greg for inclusion into -stable?
>
> No, it's not for stable. It's for 4.12.
Then I'm totally confused, since this patch has already been applied,
which is obvious since I already signed it off?
> > Isn't there a way to specify this intention?
>
> The pull request (cover letter) specifies this intention.
Great! But you forgot to send it to me, doh!
Why are you sending patches with a pull-request?
> > Also, patch 1 and 3 appear to be identical.
> >
> > Not even sure how that's possible.
Still have no idea how you managed to do this!
> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> >> ---
> >> drivers/mfd/exynos-lpass.c | 4 ++--
> >> 1 file changed, 2 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/mfd/exynos-lpass.c b/drivers/mfd/exynos-lpass.c
> >> index 2e064fb8826f..8bebad92a385 100644
> >> --- a/drivers/mfd/exynos-lpass.c
> >> +++ b/drivers/mfd/exynos-lpass.c
> >> @@ -18,11 +18,11 @@
> >> #include <linux/io.h>
> >> #include <linux/module.h>
> >> #include <linux/mfd/syscon.h>
> >> -#include <linux/mfd/syscon/exynos5-pmu.h>
> >> #include <linux/of.h>
> >> #include <linux/of_platform.h>
> >> #include <linux/platform_device.h>
> >> #include <linux/regmap.h>
> >> +#include <linux/soc/samsung/exynos-regs-pmu.h>
> >> #include <linux/types.h>
> >>
> >> /* LPASS Top register definitions */
> >> @@ -83,7 +83,7 @@ static void exynos_lpass_enable(struct exynos_lpass *lpass)
> >>
> >> /* Activate related PADs from retention state */
> >> regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION,
> >> - EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR);
> >> + EXYNOS_WAKEUP_FROM_LOWPWR);
> >>
> >> exynos_lpass_core_sw_reset(lpass, LPASS_I2S_SW_RESET);
> >> exynos_lpass_core_sw_reset(lpass, LPASS_DMA_SW_RESET);
> >>
> >
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2017-04-11 16:34 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-10 13:17 [GIT PULL] phy: for 4.12 Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 01/32] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header Kishon Vijay Abraham I
2017-04-11 14:14 ` Lee Jones
2017-04-11 14:20 ` Greg KH
2017-04-11 14:24 ` Kishon Vijay Abraham I
2017-04-11 16:34 ` Lee Jones [this message]
2017-04-12 5:19 ` Kishon Vijay Abraham I
2017-04-12 7:57 ` Lee Jones
2017-04-10 13:17 ` [PATCH 02/32] phy: phy-exynos-pcie: make it explicitly non-modular Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 03/32] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 04/32] dt: bindings: add pmu0 regs for USB PHYs on Allwinner H3/V3s/A64 Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 05/32] phy: sun4i-usb: change PHYCTL register clearing code Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 06/32] phy: sun4i-usb: add PHYCTL offset for H3 SoC Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 07/32] phy: sun4i-usb: support automatically switch PHY0 route to MUSB/HCI Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 08/32] phy: meson8b-usb2: fix offsets for some of the registers Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 09/32] phy: exynos4: Remove duplicated defines of PHY register defines Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 10/32] phy: exynos5: " Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 11/32] phy: exynos-mipi-video: Use consistent method to address phy registers Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 12/32] phy: exynos: Use one define for enable bit Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 13/32] phy: rockchip-inno-usb2: fix spelling mistake: "connecetd" -> "connected" Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 14/32] phy: rcar-gen3-usb2: fix implementation for runtime PM Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 15/32] phy: sun4i-usb: enable PHY0 dual route switching for A64 USB PHY Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 16/32] phy: phy-mt65xx-usb3: improve RX detection stable time Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 17/32] phy: phy-mt65xx-usb3: increase LFPS filter threshold Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 18/32] phy: phy-mt65xx-usb3: split SuperSpeed port into two ones Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 19/32] phy: phy-mt65xx-usb3: move clock from phy node into port nodes Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 20/32] phy: phy-mt65xx-usb3: add support for new version phy Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 21/32] phy: phy-mt65xx-usb3: disable 100uA extraction from SS port to HS port Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 22/32] dt-bindings: phy-mt65xx-usb: add support for new version phy Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 23/32] dt-bindings: phy-rockchip-inno-usb2: add assign clock property in usb2-phy node Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 24/32] dt-bindings: add DT bindings for usb2-phy grf Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 25/32] phy: rockchip-inno-usb2: add support of usb2-phy for rk3328 Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 26/32] dt-bindings: phy: Add support for QUSB2 phy Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 27/32] phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 28/32] dt-bindings: phy: Add support for QMP phy Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 29/32] phy: qcom-qmp: new qmp phy driver for qcom-chipsets Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 30/32] phy: bcm-ns-usb3: split all writes into reg & val pairs Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 31/32] phy: rockchip-usb: Add vbus regulator support Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 32/32] phy: qcom-qusb2: add NVMEM dependency Kishon Vijay Abraham I
2017-04-10 13:46 ` [GIT PULL] phy: for 4.12 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170411163438.yhbe22v34d7chit3@dell \
--to=lee.jones@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®