* [PATCH] ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E
@ 2017-06-09 15:34 Chen-Yu Tsai
2017-06-10 9:24 ` Maxime Ripard
0 siblings, 1 reply; 2+ messages in thread
From: Chen-Yu Tsai @ 2017-06-09 15:34 UTC (permalink / raw)
To: Maxime Ripard
Cc: Chen-Yu Tsai, devicetree, linux-arm-kernel, linux-kernel,
linux-sunxi, Corentin Labbe
The Orange Pi Plus 2E, unlike the Orange Pi PC and PC Plus which its
schematics are based on, uses an external Realtek RTL8211E PHY in
RGMII mode, with a GPIO enabling the regulator for I/O signalling
power supplies. The PHY's main power supply is enabled by the main
5V power supply.
Add the regulator and PHY nodes, and override the PHY phandle under
the EMAC node, so that the EMAC works properly on this board.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
index 5851a47a3089..80026f3caafc 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
@@ -50,4 +50,30 @@
/ {
model = "Xunlong Orange Pi Plus 2E";
compatible = "xunlong,orangepi-plus2e", "allwinner,sun8i-h3";
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+ };
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
};
--
2.11.0
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH] ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E
2017-06-09 15:34 [PATCH] ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E Chen-Yu Tsai
@ 2017-06-10 9:24 ` Maxime Ripard
0 siblings, 0 replies; 2+ messages in thread
From: Maxime Ripard @ 2017-06-10 9:24 UTC (permalink / raw)
To: Chen-Yu Tsai
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-sunxi, Corentin Labbe
[-- Attachment #1: Type: text/plain, Size: 686 bytes --]
On Fri, Jun 09, 2017 at 11:34:36PM +0800, Chen-Yu Tsai wrote:
> The Orange Pi Plus 2E, unlike the Orange Pi PC and PC Plus which its
> schematics are based on, uses an external Realtek RTL8211E PHY in
> RGMII mode, with a GPIO enabling the regulator for I/O signalling
> power supplies. The PHY's main power supply is enabled by the main
> 5V power supply.
>
> Add the regulator and PHY nodes, and override the PHY phandle under
> the EMAC node, so that the EMAC works properly on this board.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Applied, thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-06-10 9:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-09 15:34 [PATCH] ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E Chen-Yu Tsai
2017-06-10 9:24 ` Maxime Ripard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®