[PATCH 2/4] can: fixed-transceiver: Add documentation for CAN fixed transceiver bindings

[Franklin S Cooper Jr <fcooper@ti.com>]

Add documentation to describe usage of the new fixed transceiver binding.
This new binding is applicable for any CAN device therefore it exist as
its own document.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
 .../bindings/net/can/fixed-transceiver.txt         | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/can/fixed-transceiver.txt

diff --git a/Documentation/devicetree/bindings/net/can/fixed-transceiver.txt b/Documentation/devicetree/bindings/net/can/fixed-transceiver.txt
new file mode 100644
index 0000000..7c093c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/fixed-transceiver.txt
@@ -0,0 +1,31 @@
+Fixed transceiver Device Tree binding
+------------------------------
+
+CAN transceiver typically limits the max speed in standard CAN and CAN FD
+modes. Typically these limitations are static and the transceivers themselves
+provide no way to detect this limitation at runtime. For this situation,
+the "fixed-transceiver" node can be used.
+
+Properties:
+
+Optional:
+ max-arbitration-speed: a positive value non 0 value that determines the max
+			 speed CAN can run in non CAN-FD mode or during the
+			 arbitration phase in CAN-FD mode.
+
+ max-data-speed:	 a positive value that determines the max data rate
+			 that can be used in CAN-FD mode. A value of 0
+			 implies CAN-FD is not supported by the transceiver.
+
+Examples:
+
+Based on Texas Instrument's TCAN1042HGV CAN Transceiver
+
+m_can0 {
+	....
+	fixed-transceiver@0 {
+		max-arbitration-speed = <1000000>;
+		max-data-speed = <5000000>;
+	};
+	...
+};
-- 
2.10.0