mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"stable@vger.kernel.org" <stable@vger.kernel.org>
Cc: Jan Kara <jack@suse.cz>, "Theodore Ts'o" <tytso@mit.edu>,
	"Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
Subject: [PATCH review for 4.9 14/50] ext4: fix stripe-unaligned allocations
Date: Sat, 7 Oct 2017 22:36:49 +0000	[thread overview]
Message-ID: <20171007223636.24797-14-alexander.levin@verizon.com> (raw)
In-Reply-To: <20171007223636.24797-1-alexander.levin@verizon.com>

From: Jan Kara <jack@suse.cz>

[ Upstream commit d9b22cf9f5466a057f2a4f1e642b469fa9d73117 ]

When a filesystem is created using:

	mkfs.ext4 -b 4096 -E stride=512 <dev>

and we try to allocate 64MB extent, we will end up directly in
ext4_mb_complex_scan_group(). This is because the request is detected
as power-of-two allocation (so we start in ext4_mb_regular_allocator()
with ac_criteria == 0) however the check before
ext4_mb_simple_scan_group() refuses the direct buddy scan because the
allocation request is too large. Since cr == 0, the check whether we
should use ext4_mb_scan_aligned() fails as well and we fall back to
ext4_mb_complex_scan_group().

Fix the problem by checking for upper limit on power-of-two requests
directly when detecting them.

Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/ext4/mballoc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 846b57ff58de..64056c6eb857 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2136,8 +2136,10 @@ ext4_mb_regular_allocator(struct ext4_allocation_context *ac)
 	 * We search using buddy data only if the order of the request
 	 * is greater than equal to the sbi_s_mb_order2_reqs
 	 * You can tune it via /sys/fs/ext4/<partition>/mb_order2_req
+	 * We also support searching for power-of-two requests only for
+	 * requests upto maximum buddy size we have constructed.
 	 */
-	if (i >= sbi->s_mb_order2_reqs) {
+	if (i >= sbi->s_mb_order2_reqs && i <= sb->s_blocksize_bits + 2) {
 		/*
 		 * This should tell if fe_len is exactly power of 2
 		 */
@@ -2207,7 +2209,7 @@ ext4_mb_regular_allocator(struct ext4_allocation_context *ac)
 			}
 
 			ac->ac_groups_scanned++;
-			if (cr == 0 && ac->ac_2order < sb->s_blocksize_bits+2)
+			if (cr == 0)
 				ext4_mb_simple_scan_group(ac, &e4b);
 			else if (cr == 1 && sbi->s_stripe &&
 					!(ac->ac_g_ex.fe_len % sbi->s_stripe))
-- 
2.11.0

  parent reply	other threads:[~2017-10-07 22:49 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-07 22:36 [PATCH review for 4.9 01/50] cpufreq: Do not clear real_cpus mask on policy init Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 03/50] staging: fsl-mc: Add missing header Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 02/50] crypto: ccp - Set the AES size field for all modes Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 04/50] IB/mlx5: Assign DSCP for R-RoCE QPs Address Path Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 07/50] mmc: s3cmci: include linux/interrupt.h for tasklet_struct Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 05/50] PM / wakeirq: report a wakeup_event on dedicated wekup irq Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 06/50] scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 11/50] staging: rtl8712u: Fix endian settings for structs describing network packets Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 09/50] mfd: axp20x: Fix axp288 PEK_DBR and PEK_DBF irqs being swapped Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 10/50] bnxt_en: Added PCI IDs for BCM57452 and BCM57454 ASICs Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 08/50] mfd: ab8500-sysctrl: Handle probe deferral Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 13/50] net: mvneta: fix build errors when linux/phy*.h is removed from net/dsa.h Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 15/50] ext4: do not use stripe_width if it is not set Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 12/50] PCI/MSI: Return failure when msix_setup_entries() fails Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` Levin, Alexander (Sasha Levin) [this message]
2017-10-07 22:36 ` [PATCH review for 4.9 19/50] perf tools: Only increase index if perf_evsel__new_idx() succeeds Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 18/50] drm/amdgpu: when dpm disabled, also need to stop/start vce Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 16/50] net/ena: change driver's default timeouts Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 17/50] i2c: riic: correctly finish transfers Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 22/50] clocksource/drivers/arm_arch_timer: Add dt binding for hisilicon-161010101 erratum Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 20/50] iwlwifi: mvm: use the PROBE_RESP_QUEUE to send deauth to unknown station Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 23/50] net: phy: dp83867: Recover from "port mirroring" N/A MODE4 Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 21/50] drm/fsl-dcu: check for clk_prepare_enable() error Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 24/50] [media] cx231xx: Fix I2C on Internal Master 3 Bus Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 28/50] mtd: nand: sunxi: Fix the non-polling case in sunxi_nfc_wait_events() Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 26/50] clk: sunxi-ng: Check kzalloc() for errors and cleanup error path Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 25/50] ath10k: fix reading sram contents for QCA4019 Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 27/50] drm/msm/dsi: Set msm_dsi->encoders before initializing bridge Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 31/50] xen/manage: correct return value check on xenbus_scanf() Levin, Alexander (Sasha Levin)
2017-10-10 12:49   ` Boris Ostrovsky
2017-10-24  1:39     ` Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 32/50] scsi: aacraid: Process Error for response I/O Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 30/50] gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build error Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 29/50] dmaengine: sun6i: allow build on ARM64 platforms (sun50i) Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 33/50] platform/x86: intel_mid_thermal: Fix module autoload Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 35/50] staging: lustre: hsm: stack overrun in hai_dump_data_field Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 34/50] staging: lustre: llite: don't invoke direct_IO for the EOF case Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 36/50] staging: lustre: ptlrpc: skip lock if export failed Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 37/50] staging: lustre: lmv: Error not handled for lmv_find_target Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 38/50] brcmfmac: check brcmf_bus_get_memdump result for error Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 39/50] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches Levin, Alexander (Sasha Levin)
2017-10-09  8:36   ` Mark Brown
2017-10-24  2:12     ` Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 40/50] vfs: open() with O_CREAT should not create inodes with unknown ids Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 43/50] mei: return error on notification request to a disconnected client Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 44/50] s390/dasd: check for device error pointer within state change interrupts Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 41/50] ASoC: Intel: boards: remove .pm_ops in all Atom/DPCM machine drivers Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 42/50] [media] exynos4-is: fimc-is: Unmap region obtained by of_iomap() Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 46/50] s390/crypto: Extend key length check for AES-XTS in fips mode Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 47/50] [media] bt8xx: fix memory leak Levin, Alexander (Sasha Levin)
2017-10-07 22:36 ` [PATCH review for 4.9 45/50] s390/prng: Adjust generation of entropy to produce real 256 bits Levin, Alexander (Sasha Levin)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171007223636.24797-14-alexander.levin@verizon.com \
    --to=alexander.levin@verizon.com \
    --cc=jack@suse.cz \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®