[PATCH AUTOSEL for 4.4 01/59] ALSA: hda - add support for docking station for HP 820 G2

[PATCH AUTOSEL for 4.4 01/59] ALSA: hda - add support for docking station for HP 820 G2

[alexander.levin]

From: Jaroslav Kysela <perex@perex.cz>

[ Upstream commit 04d5466a976b096364a39a63ac264c1b3a5f8fa1 ]

This tested patch adds missing initialization for Line-In/Out PINs for
the docking station for HP 820 G2.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 sound/pci/hda/patch_realtek.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index e5730a7d0480..2159b18f76bf 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4839,6 +4839,7 @@ enum {
 	ALC286_FIXUP_HP_GPIO_LED,
 	ALC280_FIXUP_HP_GPIO2_MIC_HOTKEY,
 	ALC280_FIXUP_HP_DOCK_PINS,
+	ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED,
 	ALC280_FIXUP_HP_9480M,
 	ALC288_FIXUP_DELL_HEADSET_MODE,
 	ALC288_FIXUP_DELL1_MIC_NO_PRESENCE,
@@ -5377,6 +5378,16 @@ static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC280_FIXUP_HP_GPIO4
 	},
+	[ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x1b, 0x21011020 }, /* line-out */
+			{ 0x18, 0x2181103f }, /* line-in */
+			{ },
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HP_GPIO_MIC1_LED
+	},
 	[ALC280_FIXUP_HP_9480M] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc280_fixup_hp_9480m,
@@ -5629,7 +5640,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x2256, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
 	SND_PCI_QUIRK(0x103c, 0x2257, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
 	SND_PCI_QUIRK(0x103c, 0x2259, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
-	SND_PCI_QUIRK(0x103c, 0x225a, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
+	SND_PCI_QUIRK(0x103c, 0x225a, "HP", ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED),
 	SND_PCI_QUIRK(0x103c, 0x2260, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2263, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2264, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
@@ -5794,6 +5805,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
 	{.id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, .name = "headset-mode-no-hp-mic"},
 	{.id = ALC269_FIXUP_LENOVO_DOCK, .name = "lenovo-dock"},
 	{.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"},
+	{.id = ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED, .name = "hp-dock-gpio-mic1-led"},
 	{.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"},
 	{.id = ALC269_FIXUP_DELL2_MIC_NO_PRESENCE, .name = "dell-headset-dock"},
 	{.id = ALC283_FIXUP_CHROME_BOOK, .name = "alc283-dac-wcaps"},
-- 
2.11.0

[PATCH AUTOSEL for 4.4 02/59] ALSA: hda - add support for docking station for HP 840 G3

[alexander.levin]

From: Jaroslav Kysela <perex@perex.cz>

[ Upstream commit cc3a47a248d7791ef0d2c81a35c46769e55e4c6c ]

This tested patch adds missing initialization for Line-In/Out PINs for
the docking station for HP 840 G3.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 sound/pci/hda/patch_conexant.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index ac5de4365e15..c92b7ba344ef 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -261,6 +261,7 @@ enum {
 	CXT_FIXUP_HP_530,
 	CXT_FIXUP_CAP_MIX_AMP_5047,
 	CXT_FIXUP_MUTE_LED_EAPD,
+	CXT_FIXUP_HP_DOCK,
 	CXT_FIXUP_HP_SPECTRE,
 	CXT_FIXUP_HP_GATE_MIC,
 };
@@ -778,6 +779,14 @@ static const struct hda_fixup cxt_fixups[] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_mute_led_eapd,
 	},
+	[CXT_FIXUP_HP_DOCK] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x16, 0x21011020 }, /* line-out */
+			{ 0x18, 0x2181103f }, /* line-in */
+			{ }
+		}
+	},
 	[CXT_FIXUP_HP_SPECTRE] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -839,6 +848,7 @@ static const struct snd_pci_quirk cxt5066_fixups[] = {
 	SND_PCI_QUIRK(0x1025, 0x0543, "Acer Aspire One 522", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT_FIXUP_ASPIRE_DMIC),
 	SND_PCI_QUIRK(0x1025, 0x054f, "Acer Aspire 4830T", CXT_FIXUP_ASPIRE_DMIC),
+	SND_PCI_QUIRK(0x103c, 0x8079, "HP EliteBook 840 G3", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x8174, "HP Spectre x360", CXT_FIXUP_HP_SPECTRE),
 	SND_PCI_QUIRK(0x103c, 0x8115, "HP Z1 Gen3", CXT_FIXUP_HP_GATE_MIC),
 	SND_PCI_QUIRK(0x1043, 0x138d, "Asus", CXT_FIXUP_HEADPHONE_MIC_PIN),
@@ -872,6 +882,7 @@ static const struct hda_model_fixup cxt5066_fixup_models[] = {
 	{ .id = CXT_PINCFG_LEMOTE_A1205, .name = "lemote-a1205" },
 	{ .id = CXT_FIXUP_OLPC_XO, .name = "olpc-xo" },
 	{ .id = CXT_FIXUP_MUTE_LED_EAPD, .name = "mute-led-eapd" },
+	{ .id = CXT_FIXUP_HP_DOCK, .name = "hp-dock" },
 	{}
 };
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 03/59] arm: kprobes: Fix the return address of multiple kretprobes

[alexander.levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 06553175f585b52509c7df37d6f4a50aacb7b211 ]

This is arm port of commit 737480a0d525 ("kprobes/x86:
Fix the return address of multiple kretprobes").

Fix the return address of subsequent kretprobes when multiple
kretprobes are set on the same function.

For example:

  # cd /sys/kernel/debug/tracing
  # echo "r:event1 sys_symlink" > kprobe_events
  # echo "r:event2 sys_symlink" >> kprobe_events
  # echo 1 > events/kprobes/enable
  # ln -s /tmp/foo /tmp/bar

 (without this patch)

  # cat trace | grep -v ^#
              ln-82    [000] dn.2    68.446525: event1: (kretprobe_trampoline+0x0/0x18 <- SyS_symlink)
              ln-82    [000] dn.2    68.447831: event2: (ret_fast_syscall+0x0/0x1c <- SyS_symlink)

 (with this patch)

  # cat trace | grep -v ^#
              ln-81    [000] dn.1    39.463469: event1: (ret_fast_syscall+0x0/0x1c <- SyS_symlink)
              ln-81    [000] dn.1    39.464701: event2: (ret_fast_syscall+0x0/0x1c <- SyS_symlink)

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: KUMANO Syuhei <kumano.prog@gmail.com>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/arm/probes/kprobes/core.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c
index a4ec240ee7ba..3eb018fa1a1f 100644
--- a/arch/arm/probes/kprobes/core.c
+++ b/arch/arm/probes/kprobes/core.c
@@ -433,6 +433,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	struct hlist_node *tmp;
 	unsigned long flags, orig_ret_address = 0;
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+	kprobe_opcode_t *correct_ret_addr = NULL;
 
 	INIT_HLIST_HEAD(&empty_rp);
 	kretprobe_hash_lock(current, &head, &flags);
@@ -455,14 +456,34 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 			/* another task is sharing our hash bucket */
 			continue;
 
+		orig_ret_address = (unsigned long)ri->ret_addr;
+
+		if (orig_ret_address != trampoline_address)
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+	}
+
+	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+	correct_ret_addr = ri->ret_addr;
+	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
+
+		orig_ret_address = (unsigned long)ri->ret_addr;
 		if (ri->rp && ri->rp->handler) {
 			__this_cpu_write(current_kprobe, &ri->rp->kp);
 			get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
+			ri->ret_addr = correct_ret_addr;
 			ri->rp->handler(ri, regs);
 			__this_cpu_write(current_kprobe, NULL);
 		}
 
-		orig_ret_address = (unsigned long)ri->ret_addr;
 		recycle_rp_inst(ri, &empty_rp);
 
 		if (orig_ret_address != trampoline_address)
@@ -474,7 +495,6 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 			break;
 	}
 
-	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
-- 
2.11.0

[PATCH AUTOSEL for 4.4 06/59] r8152: fix the list rx_done may be used without initialization

[alexander.levin]

From: hayeswang <hayeswang@realtek.com>

[ Upstream commit 98d068ab52b4b11d403995ed14154660797e7136 ]

The list rx_done would be initialized when the linking on occurs.
Therefore, if a napi is scheduled without any linking on before,
the following kernel panic would happen.

	BUG: unable to handle kernel NULL pointer dereference at 000000000000008
	IP: [<ffffffffc085efde>] r8152_poll+0xe1e/0x1210 [r8152]
	PGD 0
	Oops: 0002 [#1] SMP

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/usb/r8152.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 1c27e6fb99f9..a1dc43b9bd38 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1277,6 +1277,7 @@ static int alloc_all_mem(struct r8152 *tp)
 	spin_lock_init(&tp->rx_lock);
 	spin_lock_init(&tp->tx_lock);
 	INIT_LIST_HEAD(&tp->tx_free);
+	INIT_LIST_HEAD(&tp->rx_done);
 	skb_queue_head_init(&tp->tx_queue);
 	skb_queue_head_init(&tp->rx_queue);
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 05/59] cpuidle: Validate cpu_dev in cpuidle_add_sysfs()

[alexander.levin]

From: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>

[ Upstream commit ad0a45fd9c14feebd000b6e84189d0edff265170 ]

If a given cpu is not in cpu_present and cpu hotplug
is disabled, arch can skip setting up the cpu_dev.

Arch cpuidle driver should pass correct cpu mask
for registration, but failing to do so by the driver
causes error to propagate and crash like this:

[   30.076045] Unable to handle kernel paging request for data at address 0x00000048
[   30.076100] Faulting instruction address: 0xc0000000007b2f30
cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670]
    pc: c0000000007b2f30: kobject_get+0x20/0x70
    lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0
    sp: c000003feb18b8f0
   msr: 9000000000009033
   dar: 48
 dsisr: 40000000
  current = 0xc000003fd2ed8300
  paca    = 0xc00000000fbab500   softe: 0        irq_happened: 0x01
    pid   = 1, comm = swapper/0
Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0
20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017
enter ? for help
[c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0
[c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0
[c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130
[c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0
[c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120
[c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4
[c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0
[c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360
[c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160
[c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74

Validating cpu_dev fixes the crash and reports correct error message like:

[   30.163506] Failed to register cpuidle device for cpu136
[   30.173329] Registration of powernv driver failed.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
[ rjw: Comment massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/cpuidle/sysfs.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 832a2c3f01ff..9e98a5fbbc1d 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -613,6 +613,18 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev)
 	struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
 	int error;
 
+	/*
+	 * Return if cpu_device is not setup for this CPU.
+	 *
+	 * This could happen if the arch did not set up cpu_device
+	 * since this CPU is not in cpu_present mask and the
+	 * driver did not send a correct CPU mask during registration.
+	 * Without this check we would end up passing bogus
+	 * value for &cpu_dev->kobj in kobject_init_and_add()
+	 */
+	if (!cpu_dev)
+		return -ENODEV;
+
 	kdev = kzalloc(sizeof(*kdev), GFP_KERNEL);
 	if (!kdev)
 		return -ENOMEM;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 04/59] arm: kprobes: Align stack to 8-bytes in test code

[alexander.levin]

From: Jon Medhurst <tixy@linaro.org>

[ Upstream commit 974310d047f3c7788a51d10c8d255eebdb1fa857 ]

kprobes test cases need to have a stack that is aligned to an 8-byte
boundary because they call other functions (and the ARM ABI mandates
that alignment) and because test cases include 64-bit accesses to the
stack. Unfortunately, GCC doesn't ensure this alignment for inline
assembler and for the code in question seems to always misalign it by
pushing just the LR register onto the stack. We therefore need to
explicitly perform stack alignment at the start of each test case.

Without this fix, some test cases will generate alignment faults on
systems where alignment is enforced. Even if the kernel is configured to
handle these faults in software, triggering them is ugly. It also
exposes limitations in the fault handling code which doesn't cope with
writes to the stack. E.g. when handling this instruction

   strd r6, [sp, #-64]!

the fault handling code will write to a stack location below the SP
value at the point the fault occurred, which coincides with where the
exception handler has pushed the saved register context. This results in
corruption of those registers.

Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/arm/probes/kprobes/test-core.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/arm/probes/kprobes/test-core.c b/arch/arm/probes/kprobes/test-core.c
index 9775de22e2ff..a48354de1aa1 100644
--- a/arch/arm/probes/kprobes/test-core.c
+++ b/arch/arm/probes/kprobes/test-core.c
@@ -976,7 +976,10 @@ static void coverage_end(void)
 void __naked __kprobes_test_case_start(void)
 {
 	__asm__ __volatile__ (
-		"stmdb	sp!, {r4-r11}				\n\t"
+		"mov	r2, sp					\n\t"
+		"bic	r3, r2, #7				\n\t"
+		"mov	sp, r3					\n\t"
+		"stmdb	sp!, {r2-r11}				\n\t"
 		"sub	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
 		"bic	r0, lr, #1  @ r0 = inline data		\n\t"
 		"mov	r1, sp					\n\t"
@@ -996,7 +999,8 @@ void __naked __kprobes_test_case_end_32(void)
 		"movne	pc, r0					\n\t"
 		"mov	r0, r4					\n\t"
 		"add	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
-		"ldmia	sp!, {r4-r11}				\n\t"
+		"ldmia	sp!, {r2-r11}				\n\t"
+		"mov	sp, r2					\n\t"
 		"mov	pc, r0					\n\t"
 	);
 }
@@ -1012,7 +1016,8 @@ void __naked __kprobes_test_case_end_16(void)
 		"bxne	r0					\n\t"
 		"mov	r0, r4					\n\t"
 		"add	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
-		"ldmia	sp!, {r4-r11}				\n\t"
+		"ldmia	sp!, {r2-r11}				\n\t"
+		"mov	sp, r2					\n\t"
 		"bx	r0					\n\t"
 	);
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.4 10/59] net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4

[alexander.levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 4071898bf0f4d79ff353db327af2a15123272548 ]

This gets qmicli working with the MDM6600 modem.

Cc: Bjørn Mork <bjorn@mork.no>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/usb/qmi_wwan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index e325ca3ad565..2cbecbda1ae3 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -410,6 +410,10 @@ static const struct usb_device_id products[] = {
 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x69),
 		.driver_info        = (unsigned long)&qmi_wwan_info,
 	},
+	{	/* Motorola Mapphone devices with MDM6600 */
+		USB_VENDOR_AND_INTERFACE_INFO(0x22b8, USB_CLASS_VENDOR_SPEC, 0xfb, 0xff),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
 
 	/* 2. Combined interface devices matching on class+protocol */
 	{	/* Huawei E367 and possibly others in "Windows mode" */
-- 
2.11.0

[PATCH AUTOSEL for 4.4 08/59] sch_dsmark: fix invalid skb_cow() usage

[alexander.levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit aea92fb2e09e29653b023d4254ac9fbf94221538 ]

skb_cow(skb, sizeof(ip header)) is not very helpful in this context.

First we need to use pskb_may_pull() to make sure the ip header
is in skb linear part, then use skb_try_make_writable() to
address clones issues.

Fixes: 4c30719f4f55 ("[PKT_SCHED] dsmark: handle cloned and non-linear skb's")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/sched/sch_dsmark.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c
index d0dff0cd8186..cce4e6ada7fa 100644
--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -199,9 +199,13 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 	pr_debug("%s(skb %p,sch %p,[qdisc %p])\n", __func__, skb, sch, p);
 
 	if (p->set_tc_index) {
+		int wlen = skb_network_offset(skb);
+
 		switch (tc_skb_protocol(skb)) {
 		case htons(ETH_P_IP):
-			if (skb_cow_head(skb, sizeof(struct iphdr)))
+			wlen += sizeof(struct iphdr);
+			if (!pskb_may_pull(skb, wlen) ||
+			    skb_try_make_writable(skb, wlen))
 				goto drop;
 
 			skb->tc_index = ipv4_get_dsfield(ip_hdr(skb))
@@ -209,7 +213,9 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 			break;
 
 		case htons(ETH_P_IPV6):
-			if (skb_cow_head(skb, sizeof(struct ipv6hdr)))
+			wlen += sizeof(struct ipv6hdr);
+			if (!pskb_may_pull(skb, wlen) ||
+			    skb_try_make_writable(skb, wlen))
 				goto drop;
 
 			skb->tc_index = ipv6_get_dsfield(ipv6_hdr(skb))
-- 
2.11.0

[PATCH AUTOSEL for 4.4 07/59] crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex

[alexander.levin]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit 8a0f5ccfb33b0b8b51de65b7b3bf342ba10b4fb6 ]

On Tue, Mar 14, 2017 at 10:44:10AM +0100, Dmitry Vyukov wrote:
>
> Yes, please.
> Disregarding some reports is not a good way long term.

Please try this patch.

---8<---
Subject: netlink: Annotate nlk cb_mutex by protocol

Currently all occurences of nlk->cb_mutex are annotated by lockdep
as a single class.  This causes a false lcokdep cycle involving
genl and crypto_user.

This patch fixes it by dividing cb_mutex into individual classes
based on the netlink protocol.  As genl and crypto_user do not
use the same netlink protocol this breaks the false dependency
loop.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/netlink/af_netlink.c | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index a87afc4f3c91..5fabe68e20dd 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -96,6 +96,44 @@ EXPORT_SYMBOL_GPL(nl_table);
 
 static DECLARE_WAIT_QUEUE_HEAD(nl_table_wait);
 
+static struct lock_class_key nlk_cb_mutex_keys[MAX_LINKS];
+
+static const char *const nlk_cb_mutex_key_strings[MAX_LINKS + 1] = {
+	"nlk_cb_mutex-ROUTE",
+	"nlk_cb_mutex-1",
+	"nlk_cb_mutex-USERSOCK",
+	"nlk_cb_mutex-FIREWALL",
+	"nlk_cb_mutex-SOCK_DIAG",
+	"nlk_cb_mutex-NFLOG",
+	"nlk_cb_mutex-XFRM",
+	"nlk_cb_mutex-SELINUX",
+	"nlk_cb_mutex-ISCSI",
+	"nlk_cb_mutex-AUDIT",
+	"nlk_cb_mutex-FIB_LOOKUP",
+	"nlk_cb_mutex-CONNECTOR",
+	"nlk_cb_mutex-NETFILTER",
+	"nlk_cb_mutex-IP6_FW",
+	"nlk_cb_mutex-DNRTMSG",
+	"nlk_cb_mutex-KOBJECT_UEVENT",
+	"nlk_cb_mutex-GENERIC",
+	"nlk_cb_mutex-17",
+	"nlk_cb_mutex-SCSITRANSPORT",
+	"nlk_cb_mutex-ECRYPTFS",
+	"nlk_cb_mutex-RDMA",
+	"nlk_cb_mutex-CRYPTO",
+	"nlk_cb_mutex-SMC",
+	"nlk_cb_mutex-23",
+	"nlk_cb_mutex-24",
+	"nlk_cb_mutex-25",
+	"nlk_cb_mutex-26",
+	"nlk_cb_mutex-27",
+	"nlk_cb_mutex-28",
+	"nlk_cb_mutex-29",
+	"nlk_cb_mutex-30",
+	"nlk_cb_mutex-31",
+	"nlk_cb_mutex-MAX_LINKS"
+};
+
 static int netlink_dump(struct sock *sk);
 static void netlink_skb_destructor(struct sk_buff *skb);
 
@@ -585,6 +623,9 @@ static int __netlink_create(struct net *net, struct socket *sock,
 	} else {
 		nlk->cb_mutex = &nlk->cb_def_mutex;
 		mutex_init(nlk->cb_mutex);
+		lockdep_set_class_and_name(nlk->cb_mutex,
+					   nlk_cb_mutex_keys + protocol,
+					   nlk_cb_mutex_key_strings[protocol]);
 	}
 	init_waitqueue_head(&nlk->wait);
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 09/59] bna: integer overflow bug in debugfs

[alexander.levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 13e2d5187f6b965ba3556caedb914baf81b98ed2 ]

We could allocate less memory than intended because we do:

	bnad->regdata = kzalloc(len << 2, GFP_KERNEL);

The shift can overflow leading to a crash.  This is debugfs code so the
impact is very small.

Fixes: 7afc5dbde091 ("bna: Add debugfs interface.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/brocade/bna/bnad_debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
index 8fc246ea1fb8..a4ad782007ce 100644
--- a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
+++ b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
@@ -324,7 +324,7 @@ bnad_debugfs_write_regrd(struct file *file, const char __user *buf,
 		return PTR_ERR(kern_buf);
 
 	rc = sscanf(kern_buf, "%x:%x", &addr, &len);
-	if (rc < 2) {
+	if (rc < 2 || len > UINT_MAX >> 2) {
 		netdev_warn(bnad->netdev, "failed to read user buffer\n");
 		kfree(kern_buf);
 		return -EINVAL;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 12/59] usb: gadget: udc: remove pointer dereference after free

[alexander.levin]

From: "Gustavo A. R. Silva" <garsilva@embeddedor.com>

[ Upstream commit 1f459262b0e1649a1e5ad12fa4c66eb76c2220ce ]

Remove pointer dereference after free.

Addresses-Coverity-ID: 1091173
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/usb/gadget/udc/pch_udc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 7a04157ff579..2806457b4748 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -1534,7 +1534,6 @@ static void pch_udc_free_dma_chain(struct pch_udc_dev *dev,
 		td = phys_to_virt(addr);
 		addr2 = (dma_addr_t)td->next;
 		pci_pool_free(dev->data_requests, td, addr);
-		td->next = 0x00;
 		addr = addr2;
 	}
 	req->chain_len = 1;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 11/59] usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed

[alexander.levin]

From: Roger Quadros <rogerq@ti.com>

[ Upstream commit 16bb05d98c904a4f6c5ce7e2d992299f794acbf2 ]

As per USB3.0 Specification "Table 9-20. Standard Endpoint Descriptor",
for interrupt and isochronous endpoints, wMaxPacketSize must be set to
1024 if the endpoint defines bMaxBurst to be greater than zero.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/usb/gadget/function/f_uvc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index c7689d05356c..f8a1881609a2 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -594,6 +594,14 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	opts->streaming_maxpacket = clamp(opts->streaming_maxpacket, 1U, 3072U);
 	opts->streaming_maxburst = min(opts->streaming_maxburst, 15U);
 
+	/* For SS, wMaxPacketSize has to be 1024 if bMaxBurst is not 0 */
+	if (opts->streaming_maxburst &&
+	    (opts->streaming_maxpacket % 1024) != 0) {
+		opts->streaming_maxpacket = roundup(opts->streaming_maxpacket, 1024);
+		INFO(cdev, "overriding streaming_maxpacket to %d\n",
+		     opts->streaming_maxpacket);
+	}
+
 	/* Fill in the FS/HS/SS Video Streaming specific descriptors from the
 	 * module parameters.
 	 *
-- 
2.11.0

[PATCH AUTOSEL for 4.4 14/59] netfilter: nfnl_cthelper: Fix memory leak

[alexander.levin]

From: Jeffy Chen <jeffy.chen@rock-chips.com>

[ Upstream commit f83bf8da1135ca635aac8f062cad3f001fcf3a26 ]

We have memory leaks of nf_conntrack_helper & expect_policy.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/netfilter/nfnetlink_cthelper.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nfnetlink_cthelper.c b/net/netfilter/nfnetlink_cthelper.c
index 3e697de2d154..f24d2cec02fb 100644
--- a/net/netfilter/nfnetlink_cthelper.c
+++ b/net/netfilter/nfnetlink_cthelper.c
@@ -216,7 +216,7 @@ nfnl_cthelper_create(const struct nlattr * const tb[],
 
 	ret = nfnl_cthelper_parse_expect_policy(helper, tb[NFCTH_POLICY]);
 	if (ret < 0)
-		goto err;
+		goto err1;
 
 	strncpy(helper->name, nla_data(tb[NFCTH_NAME]), NF_CT_HELPER_NAME_LEN);
 	helper->data_len = ntohl(nla_get_be32(tb[NFCTH_PRIV_DATA_LEN]));
@@ -247,10 +247,12 @@ nfnl_cthelper_create(const struct nlattr * const tb[],
 
 	ret = nf_conntrack_helper_register(helper);
 	if (ret < 0)
-		goto err;
+		goto err2;
 
 	return 0;
-err:
+err2:
+	kfree(helper->expect_policy);
+err1:
 	kfree(helper);
 	return ret;
 }
@@ -696,6 +698,8 @@ nfnl_cthelper_del(struct sock *nfnl, struct sk_buff *skb,
 
 			found = true;
 			nf_conntrack_helper_unregister(cur);
+			kfree(cur->expect_policy);
+			kfree(cur);
 		}
 	}
 	/* Make sure we return success if we flush and there is no helpers */
@@ -759,6 +763,8 @@ static void __exit nfnl_cthelper_exit(void)
 				continue;
 
 			nf_conntrack_helper_unregister(cur);
+			kfree(cur->expect_policy);
+			kfree(cur);
 		}
 	}
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.4 13/59] netfilter: nfnl_cthelper: fix runtime expectation policy updates

[alexander.levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 2c422257550f123049552b39f7af6e3428a60f43 ]

We only allow runtime updates of expectation policies for timeout and
maximum number of expectations, otherwise reject the update.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/netfilter/nfnetlink_cthelper.c | 86 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 84 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nfnetlink_cthelper.c b/net/netfilter/nfnetlink_cthelper.c
index 6d10002d23f8..3e697de2d154 100644
--- a/net/netfilter/nfnetlink_cthelper.c
+++ b/net/netfilter/nfnetlink_cthelper.c
@@ -256,6 +256,89 @@ nfnl_cthelper_create(const struct nlattr * const tb[],
 }
 
 static int
+nfnl_cthelper_update_policy_one(const struct nf_conntrack_expect_policy *policy,
+				struct nf_conntrack_expect_policy *new_policy,
+				const struct nlattr *attr)
+{
+	struct nlattr *tb[NFCTH_POLICY_MAX + 1];
+	int err;
+
+	err = nla_parse_nested(tb, NFCTH_POLICY_MAX, attr,
+			       nfnl_cthelper_expect_pol);
+	if (err < 0)
+		return err;
+
+	if (!tb[NFCTH_POLICY_NAME] ||
+	    !tb[NFCTH_POLICY_EXPECT_MAX] ||
+	    !tb[NFCTH_POLICY_EXPECT_TIMEOUT])
+		return -EINVAL;
+
+	if (nla_strcmp(tb[NFCTH_POLICY_NAME], policy->name))
+		return -EBUSY;
+
+	new_policy->max_expected =
+		ntohl(nla_get_be32(tb[NFCTH_POLICY_EXPECT_MAX]));
+	new_policy->timeout =
+		ntohl(nla_get_be32(tb[NFCTH_POLICY_EXPECT_TIMEOUT]));
+
+	return 0;
+}
+
+static int nfnl_cthelper_update_policy_all(struct nlattr *tb[],
+					   struct nf_conntrack_helper *helper)
+{
+	struct nf_conntrack_expect_policy new_policy[helper->expect_class_max + 1];
+	struct nf_conntrack_expect_policy *policy;
+	int i, err;
+
+	/* Check first that all policy attributes are well-formed, so we don't
+	 * leave things in inconsistent state on errors.
+	 */
+	for (i = 0; i < helper->expect_class_max + 1; i++) {
+
+		if (!tb[NFCTH_POLICY_SET + i])
+			return -EINVAL;
+
+		err = nfnl_cthelper_update_policy_one(&helper->expect_policy[i],
+						      &new_policy[i],
+						      tb[NFCTH_POLICY_SET + i]);
+		if (err < 0)
+			return err;
+	}
+	/* Now we can safely update them. */
+	for (i = 0; i < helper->expect_class_max + 1; i++) {
+		policy = (struct nf_conntrack_expect_policy *)
+				&helper->expect_policy[i];
+		policy->max_expected = new_policy->max_expected;
+		policy->timeout	= new_policy->timeout;
+	}
+
+	return 0;
+}
+
+static int nfnl_cthelper_update_policy(struct nf_conntrack_helper *helper,
+				       const struct nlattr *attr)
+{
+	struct nlattr *tb[NFCTH_POLICY_SET_MAX + 1];
+	unsigned int class_max;
+	int err;
+
+	err = nla_parse_nested(tb, NFCTH_POLICY_SET_MAX, attr,
+			       nfnl_cthelper_expect_policy_set);
+	if (err < 0)
+		return err;
+
+	if (!tb[NFCTH_POLICY_SET_NUM])
+		return -EINVAL;
+
+	class_max = ntohl(nla_get_be32(tb[NFCTH_POLICY_SET_NUM]));
+	if (helper->expect_class_max + 1 != class_max)
+		return -EBUSY;
+
+	return nfnl_cthelper_update_policy_all(tb, helper);
+}
+
+static int
 nfnl_cthelper_update(const struct nlattr * const tb[],
 		     struct nf_conntrack_helper *helper)
 {
@@ -265,8 +348,7 @@ nfnl_cthelper_update(const struct nlattr * const tb[],
 		return -EBUSY;
 
 	if (tb[NFCTH_POLICY]) {
-		ret = nfnl_cthelper_parse_expect_policy(helper,
-							tb[NFCTH_POLICY]);
+		ret = nfnl_cthelper_update_policy(helper, tb[NFCTH_POLICY]);
 		if (ret < 0)
 			return ret;
 	}
-- 
2.11.0

[PATCH AUTOSEL for 4.4 15/59] inet: frag: release spinlock before calling icmp_send()

[alexander.levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit ec4fbd64751de18729eaa816ec69e4b504b5a7a2 ]

Dmitry reported a lockdep splat [1] (false positive) that we can fix
by releasing the spinlock before calling icmp_send() from ip_expire()

This is a false positive because sending an ICMP message can not
possibly re-enter the IP frag engine.

[1]
[ INFO: possible circular locking dependency detected ]
4.10.0+ #29 Not tainted
-------------------------------------------------------
modprobe/12392 is trying to acquire lock:
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] spin_lock
include/linux/spinlock.h:299 [inline]
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] __netif_tx_lock
include/linux/netdevice.h:3486 [inline]
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>]
sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180

but task is already holding lock:
 (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock
include/linux/spinlock.h:299 [inline]
 (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>]
ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&(&q->lock)->rlock){+.-...}:
       validate_chain kernel/locking/lockdep.c:2267 [inline]
       __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
       lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
       __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
       _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
       spin_lock include/linux/spinlock.h:299 [inline]
       ip_defrag+0x3a2/0x4130 net/ipv4/ip_fragment.c:669
       ip_check_defrag+0x4e3/0x8b0 net/ipv4/ip_fragment.c:713
       packet_rcv_fanout+0x282/0x800 net/packet/af_packet.c:1459
       deliver_skb net/core/dev.c:1834 [inline]
       dev_queue_xmit_nit+0x294/0xa90 net/core/dev.c:1890
       xmit_one net/core/dev.c:2903 [inline]
       dev_hard_start_xmit+0x16b/0xab0 net/core/dev.c:2923
       sch_direct_xmit+0x31f/0x6d0 net/sched/sch_generic.c:182
       __dev_xmit_skb net/core/dev.c:3092 [inline]
       __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
       dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
       neigh_resolve_output+0x6b9/0xb10 net/core/neighbour.c:1308
       neigh_output include/net/neighbour.h:478 [inline]
       ip_finish_output2+0x8b8/0x15a0 net/ipv4/ip_output.c:228
       ip_do_fragment+0x1d93/0x2720 net/ipv4/ip_output.c:672
       ip_fragment.constprop.54+0x145/0x200 net/ipv4/ip_output.c:545
       ip_finish_output+0x82d/0xe10 net/ipv4/ip_output.c:314
       NF_HOOK_COND include/linux/netfilter.h:246 [inline]
       ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
       dst_output include/net/dst.h:486 [inline]
       ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
       ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
       ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
       raw_sendmsg+0x26de/0x3a00 net/ipv4/raw.c:655
       inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761
       sock_sendmsg_nosec net/socket.c:633 [inline]
       sock_sendmsg+0xca/0x110 net/socket.c:643
       ___sys_sendmsg+0x4a3/0x9f0 net/socket.c:1985
       __sys_sendmmsg+0x25c/0x750 net/socket.c:2075
       SYSC_sendmmsg net/socket.c:2106 [inline]
       SyS_sendmmsg+0x35/0x60 net/socket.c:2101
       do_syscall_64+0x2e8/0x930 arch/x86/entry/common.c:281
       return_from_SYSCALL_64+0x0/0x7a

-> #0 (_xmit_ETHER#2){+.-...}:
       check_prev_add kernel/locking/lockdep.c:1830 [inline]
       check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940
       validate_chain kernel/locking/lockdep.c:2267 [inline]
       __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
       lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
       __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
       _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
       spin_lock include/linux/spinlock.h:299 [inline]
       __netif_tx_lock include/linux/netdevice.h:3486 [inline]
       sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180
       __dev_xmit_skb net/core/dev.c:3092 [inline]
       __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
       dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
       neigh_hh_output include/net/neighbour.h:468 [inline]
       neigh_output include/net/neighbour.h:476 [inline]
       ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228
       ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316
       NF_HOOK_COND include/linux/netfilter.h:246 [inline]
       ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
       dst_output include/net/dst.h:486 [inline]
       ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
       ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
       ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
       icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394
       icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754
       ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239
       call_timer_fn+0x241/0x820 kernel/time/timer.c:1268
       expire_timers kernel/time/timer.c:1307 [inline]
       __run_timers+0x960/0xcf0 kernel/time/timer.c:1601
       run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614
       __do_softirq+0x31f/0xbe7 kernel/softirq.c:284
       invoke_softirq kernel/softirq.c:364 [inline]
       irq_exit+0x1cc/0x200 kernel/softirq.c:405
       exiting_irq arch/x86/include/asm/apic.h:657 [inline]
       smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962
       apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707
       __read_once_size include/linux/compiler.h:254 [inline]
       atomic_read arch/x86/include/asm/atomic.h:26 [inline]
       rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline]
       __rcu_is_watching kernel/rcu/tree.c:1133 [inline]
       rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147
       rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293
       radix_tree_deref_slot include/linux/radix-tree.h:238 [inline]
       filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335
       do_fault_around mm/memory.c:3231 [inline]
       do_read_fault mm/memory.c:3265 [inline]
       do_fault+0xbd5/0x2080 mm/memory.c:3370
       handle_pte_fault mm/memory.c:3600 [inline]
       __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714
       handle_mm_fault+0x1e2/0x480 mm/memory.c:3751
       __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397
       do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460
       page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&q->lock)->rlock);
                               lock(_xmit_ETHER#2);
                               lock(&(&q->lock)->rlock);
  lock(_xmit_ETHER#2);

 *** DEADLOCK ***

10 locks held by modprobe/12392:
 #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff81329758>]
__do_page_fault+0x2b8/0xb60 arch/x86/mm/fault.c:1336
 #1:  (rcu_read_lock){......}, at: [<ffffffff8188cab6>]
filemap_map_pages+0x1e6/0x1570 mm/filemap.c:2324
 #2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
spin_lock include/linux/spinlock.h:299 [inline]
 #2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
pte_alloc_one_map mm/memory.c:2944 [inline]
 #2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
alloc_set_pte+0x13b8/0x1b90 mm/memory.c:3072
 #3:  (((&q->timer))){+.-...}, at: [<ffffffff81627e72>]
lockdep_copy_map include/linux/lockdep.h:175 [inline]
 #3:  (((&q->timer))){+.-...}, at: [<ffffffff81627e72>]
call_timer_fn+0x1c2/0x820 kernel/time/timer.c:1258
 #4:  (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock
include/linux/spinlock.h:299 [inline]
 #4:  (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>]
ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201
 #5:  (rcu_read_lock){......}, at: [<ffffffff8389a633>]
ip_expire+0x1b3/0x6c0 net/ipv4/ip_fragment.c:216
 #6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] spin_trylock
include/linux/spinlock.h:309 [inline]
 #6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_xmit_lock
net/ipv4/icmp.c:219 [inline]
 #6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>]
icmp_send+0x803/0x1c80 net/ipv4/icmp.c:681
 #7:  (rcu_read_lock_bh){......}, at: [<ffffffff838ab9a1>]
ip_finish_output2+0x2c1/0x15a0 net/ipv4/ip_output.c:198
 #8:  (rcu_read_lock_bh){......}, at: [<ffffffff836d1dee>]
__dev_queue_xmit+0x23e/0x1e60 net/core/dev.c:3324
 #9:  (dev->qdisc_running_key ?: &qdisc_running_key){+.....}, at:
[<ffffffff836d3a27>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3423

stack backtrace:
CPU: 0 PID: 12392 Comm: modprobe Not tainted 4.10.0+ #29
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x2ee/0x3ef lib/dump_stack.c:52
 print_circular_bug+0x307/0x3b0 kernel/locking/lockdep.c:1204
 check_prev_add kernel/locking/lockdep.c:1830 [inline]
 check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940
 validate_chain kernel/locking/lockdep.c:2267 [inline]
 __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
 spin_lock include/linux/spinlock.h:299 [inline]
 __netif_tx_lock include/linux/netdevice.h:3486 [inline]
 sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180
 __dev_xmit_skb net/core/dev.c:3092 [inline]
 __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
 neigh_hh_output include/net/neighbour.h:468 [inline]
 neigh_output include/net/neighbour.h:476 [inline]
 ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228
 ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:246 [inline]
 ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
 dst_output include/net/dst.h:486 [inline]
 ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
 icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394
 icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754
 ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239
 call_timer_fn+0x241/0x820 kernel/time/timer.c:1268
 expire_timers kernel/time/timer.c:1307 [inline]
 __run_timers+0x960/0xcf0 kernel/time/timer.c:1601
 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614
 __do_softirq+0x31f/0xbe7 kernel/softirq.c:284
 invoke_softirq kernel/softirq.c:364 [inline]
 irq_exit+0x1cc/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:657 [inline]
 smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962
 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707
RIP: 0010:__read_once_size include/linux/compiler.h:254 [inline]
RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline]
RIP: 0010:rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline]
RIP: 0010:__rcu_is_watching kernel/rcu/tree.c:1133 [inline]
RIP: 0010:rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147
RSP: 0000:ffff8801c391f120 EFLAGS: 00000a03 ORIG_RAX: ffffffffffffff10
RAX: dffffc0000000000 RBX: ffff8801c391f148 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000055edd4374000 RDI: ffff8801dbe1ae0c
RBP: ffff8801c391f1a0 R08: 0000000000000002 R09: 0000000000000000
R10: dffffc0000000000 R11: 0000000000000002 R12: 1ffff10038723e25
R13: ffff8801dbe1ae00 R14: ffff8801c391f680 R15: dffffc0000000000
 </IRQ>
 rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293
 radix_tree_deref_slot include/linux/radix-tree.h:238 [inline]
 filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335
 do_fault_around mm/memory.c:3231 [inline]
 do_read_fault mm/memory.c:3265 [inline]
 do_fault+0xbd5/0x2080 mm/memory.c:3370
 handle_pte_fault mm/memory.c:3600 [inline]
 __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714
 handle_mm_fault+0x1e2/0x480 mm/memory.c:3751
 __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397
 do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460
 page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011
RIP: 0033:0x7f83172f2786
RSP: 002b:00007fffe859ae80 EFLAGS: 00010293
RAX: 000055edd4373040 RBX: 00007f83175111c8 RCX: 000055edd4373238
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007f8317510970
RBP: 00007fffe859afd0 R08: 0000000000000009 R09: 0000000000000000
R10: 0000000000000064 R11: 0000000000000000 R12: 000055edd4373040
R13: 0000000000000000 R14: 00007fffe859afe8 R15: 0000000000000000

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/ipv4/ip_fragment.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index e2e162432aa3..7057a1b09b5e 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -200,6 +200,7 @@ static void ip_expire(unsigned long arg)
 	qp = container_of((struct inet_frag_queue *) arg, struct ipq, q);
 	net = container_of(qp->q.net, struct net, ipv4.frags);
 
+	rcu_read_lock();
 	spin_lock(&qp->q.lock);
 
 	if (qp->q.flags & INET_FRAG_COMPLETE)
@@ -209,7 +210,7 @@ static void ip_expire(unsigned long arg)
 	IP_INC_STATS_BH(net, IPSTATS_MIB_REASMFAILS);
 
 	if (!inet_frag_evicting(&qp->q)) {
-		struct sk_buff *head = qp->q.fragments;
+		struct sk_buff *clone, *head = qp->q.fragments;
 		const struct iphdr *iph;
 		int err;
 
@@ -218,32 +219,40 @@ static void ip_expire(unsigned long arg)
 		if (!(qp->q.flags & INET_FRAG_FIRST_IN) || !qp->q.fragments)
 			goto out;
 
-		rcu_read_lock();
 		head->dev = dev_get_by_index_rcu(net, qp->iif);
 		if (!head->dev)
-			goto out_rcu_unlock;
+			goto out;
+
 
 		/* skb has no dst, perform route lookup again */
 		iph = ip_hdr(head);
 		err = ip_route_input_noref(head, iph->daddr, iph->saddr,
 					   iph->tos, head->dev);
 		if (err)
-			goto out_rcu_unlock;
+			goto out;
 
 		/* Only an end host needs to send an ICMP
 		 * "Fragment Reassembly Timeout" message, per RFC792.
 		 */
 		if (frag_expire_skip_icmp(qp->user) &&
 		    (skb_rtable(head)->rt_type != RTN_LOCAL))
-			goto out_rcu_unlock;
+			goto out;
+
+		clone = skb_clone(head, GFP_ATOMIC);
 
 		/* Send an ICMP "Fragment Reassembly Timeout" message. */
-		icmp_send(head, ICMP_TIME_EXCEEDED, ICMP_EXC_FRAGTIME, 0);
-out_rcu_unlock:
-		rcu_read_unlock();
+		if (clone) {
+			spin_unlock(&qp->q.lock);
+			icmp_send(clone, ICMP_TIME_EXCEEDED,
+				  ICMP_EXC_FRAGTIME, 0);
+			consume_skb(clone);
+			goto out_rcu_unlock;
+		}
 	}
 out:
 	spin_unlock(&qp->q.lock);
+out_rcu_unlock:
+	rcu_read_unlock();
 	ipq_put(qp);
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 17/59] scsi: lpfc: Fix PT2PT PRLI reject

[alexander.levin]

From: Dick Kennedy <dick.kennedy@broadcom.com>

[ Upstream commit a71e3cdcfce4880a4578915e110e3eaed1659765 ]

lpfc cannot establish connection with targets that send PRLI in P2P
configurations.

If lpfc rejects a PRLI that is sent from a target the target will not
resend and will reject the PRLI send from the initiator.

[mkp: applied by hand]

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/lpfc/lpfc_els.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index d278362448ca..91545efaaec0 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -7491,7 +7491,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 			did, vport->port_state, ndlp->nlp_flag);
 
 		phba->fc_stat.elsRcvPRLI++;
-		if (vport->port_state < LPFC_DISC_AUTH) {
+		if ((vport->port_state < LPFC_DISC_AUTH) &&
+		    (vport->fc_flag & FC_FABRIC)) {
 			rjt_err = LSRJT_UNABLE_TPC;
 			rjt_exp = LSEXP_NOTHING_MORE;
 			break;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 16/59] pinctrl: st: add irq_request/release_resources callbacks

[alexander.levin]

From: Patrice Chotard <patrice.chotard@st.com>

[ Upstream commit e855fa9a65c40788b5069abb0d094537daa22e05 ]

When using GPIO as IRQ source, the GPIO must be configured
in INPUT. Callbacks dedicated for this was missing in
pinctrl-st driver.

This fix the following kernel error when trying to lock a gpio
as IRQ:

[    7.521095] gpio gpiochip7: (PIO11): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[    7.526018] gpio gpiochip7: (PIO11): unable to lock HW IRQ 6 for IRQ
[    7.529405] genirq: Failed to request resources for 0-0053 (irq 81) on irqchip GPIO

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/pinctrl/pinctrl-st.c | 30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
index b58d3f29148a..6908b6ce2074 100644
--- a/drivers/pinctrl/pinctrl-st.c
+++ b/drivers/pinctrl/pinctrl-st.c
@@ -1338,6 +1338,22 @@ static void st_gpio_irq_unmask(struct irq_data *d)
 	writel(BIT(d->hwirq), bank->base + REG_PIO_SET_PMASK);
 }
 
+static int st_gpio_irq_request_resources(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	st_gpio_direction_input(gc, d->hwirq);
+
+	return gpiochip_lock_as_irq(gc, d->hwirq);
+}
+
+static void st_gpio_irq_release_resources(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	gpiochip_unlock_as_irq(gc, d->hwirq);
+}
+
 static int st_gpio_irq_set_type(struct irq_data *d, unsigned type)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
@@ -1493,12 +1509,14 @@ static struct gpio_chip st_gpio_template = {
 };
 
 static struct irq_chip st_gpio_irqchip = {
-	.name		= "GPIO",
-	.irq_disable	= st_gpio_irq_mask,
-	.irq_mask	= st_gpio_irq_mask,
-	.irq_unmask	= st_gpio_irq_unmask,
-	.irq_set_type	= st_gpio_irq_set_type,
-	.flags		= IRQCHIP_SKIP_SET_WAKE,
+	.name			= "GPIO",
+	.irq_request_resources	= st_gpio_irq_request_resources,
+	.irq_release_resources	= st_gpio_irq_release_resources,
+	.irq_disable		= st_gpio_irq_mask,
+	.irq_mask		= st_gpio_irq_mask,
+	.irq_unmask		= st_gpio_irq_unmask,
+	.irq_set_type		= st_gpio_irq_set_type,
+	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
 static int st_gpiolib_register_bank(struct st_pinctrl *info,
-- 
2.11.0

[PATCH AUTOSEL for 4.4 18/59] KVM: x86: correct async page present tracepoint

[alexander.levin]

From: Wanpeng Li <wanpeng.li@hotmail.com>

[ Upstream commit 24dccf83a121b8a4ad5c2ad383a8184ef6c266ee ]

After async pf setup successfully, there is a broadcast wakeup w/ special
token 0xffffffff which tells vCPU that it should wake up all processes
waiting for APFs though there is no real process waiting at the moment.

The async page present tracepoint print prematurely and fails to catch the
special token setup. This patch fixes it by moving the async page present
tracepoint after the special token setup.

Before patch:

qemu-system-x86-8499  [006] ...1  5973.473292: kvm_async_pf_ready: token 0x0 gva 0x0

After patch:

qemu-system-x86-8499  [006] ...1  5973.473292: kvm_async_pf_ready: token 0xffffffff gva 0x0

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/x86/kvm/x86.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index df81717a92f3..e5f44f33de89 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -8230,11 +8230,11 @@ void kvm_arch_async_page_present(struct kvm_vcpu *vcpu,
 {
 	struct x86_exception fault;
 
-	trace_kvm_async_pf_ready(work->arch.token, work->gva);
 	if (work->wakeup_all)
 		work->arch.token = ~0; /* broadcast wakeup */
 	else
 		kvm_del_async_pf_gfn(vcpu, work->arch.gfn);
+	trace_kvm_async_pf_ready(work->arch.token, work->gva);
 
 	if ((vcpu->arch.apf.msr_val & KVM_ASYNC_PF_ENABLED) &&
 	    !apf_put_user(vcpu, KVM_PV_REASON_PAGE_READY)) {
-- 
2.11.0

[PATCH AUTOSEL for 4.4 20/59] ARM: dts: ti: fix PCI bus dtc warnings

[alexander.levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 7d79f6098d82f8c09914d7799bc96891ad9c3baf ]

dtc recently added PCI bus checks. Fix these warnings.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/arm/boot/dts/dra7.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index c2a03c740e79..02bd6312d1d9 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -227,6 +227,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				ti,hwmods = "pcie1";
@@ -262,6 +263,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				ti,hwmods = "pcie2";
-- 
2.11.0

[PATCH AUTOSEL for 4.4 19/59] KVM: VMX: Fix enable VPID conditions

[alexander.levin]

From: Wanpeng Li <wanpeng.li@hotmail.com>

[ Upstream commit 08d839c4b134b8328ec42f2157a9ca4b93227c03 ]

This can be reproduced by running L2 on L1, and disable VPID on L0
if w/o commit "KVM: nVMX: Fix nested VPID vmx exec control", the L2
crash as below:

KVM: entry failed, hardware error 0x7
EAX=00000000 EBX=00000000 ECX=00000000 EDX=000306c3
ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000
EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0000 00000000 0000ffff 00009300
CS =f000 ffff0000 0000ffff 00009b00
SS =0000 00000000 0000ffff 00009300
DS =0000 00000000 0000ffff 00009300
FS =0000 00000000 0000ffff 00009300
GS =0000 00000000 0000ffff 00009300
LDT=0000 00000000 0000ffff 00008200
TR =0000 00000000 0000ffff 00008b00
GDT=     00000000 0000ffff
IDT=     00000000 0000ffff
CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000

Reference SDM 30.3 INVVPID:

Protected Mode Exceptions
- #UD
  - If not in VMX operation.
  - If the logical processor does not support VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=0).
  - If the logical processor supports VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=1) but does
    not support the INVVPID instruction (IA32_VMX_EPT_VPID_CAP[32]=0).

So we should check both VPID enable bit in vmx exec control and INVVPID support bit
in vmx capability MSRs to enable VPID. This patch adds the guarantee to not enable
VPID if either INVVPID or single-context/all-context invalidation is not exposed in
vmx capability MSRs.

Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/x86/kvm/vmx.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 253a8c8207bb..f2a5363bf311 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1107,6 +1107,11 @@ static inline bool cpu_has_vmx_invvpid_global(void)
 	return vmx_capability.vpid & VMX_VPID_EXTENT_GLOBAL_CONTEXT_BIT;
 }
 
+static inline bool cpu_has_vmx_invvpid(void)
+{
+	return vmx_capability.vpid & VMX_VPID_INVVPID_BIT;
+}
+
 static inline bool cpu_has_vmx_ept(void)
 {
 	return vmcs_config.cpu_based_2nd_exec_ctrl &
@@ -6204,8 +6209,10 @@ static __init int hardware_setup(void)
 	if (boot_cpu_has(X86_FEATURE_NX))
 		kvm_enable_efer_bits(EFER_NX);
 
-	if (!cpu_has_vmx_vpid())
+	if (!cpu_has_vmx_vpid() || !cpu_has_vmx_invvpid() ||
+		!(cpu_has_vmx_invvpid_single() || cpu_has_vmx_invvpid_global()))
 		enable_vpid = 0;
+
 	if (!cpu_has_vmx_shadow_vmcs())
 		enable_shadow_vmcs = 0;
 	if (enable_shadow_vmcs)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 22/59] i2c: mux: pca954x: Add missing pca9546 definition to chip_desc

[alexander.levin]

From: Mike Looijmans <mike.looijmans@topic.nl>

[ Upstream commit dbe4d69d252e9e65c6c46826980b77b11a142065 ]

The spec for the pca9546 was missing. This chip is the same as the pca9545
except that it lacks interrupt lines. While the i2c_device_id table mapped
the pca9546 to the pca9545 definition the compatible table did not.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/i2c/muxes/i2c-mux-pca954x.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index acfcef3d4068..11ff66ec39e2 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -94,6 +94,10 @@ static const struct chip_desc chips[] = {
 		.nchans = 4,
 		.muxtype = pca954x_isswi,
 	},
+	[pca_9546] = {
+		.nchans = 4,
+		.muxtype = pca954x_isswi,
+	},
 	[pca_9547] = {
 		.nchans = 8,
 		.enable = 0x8,
@@ -111,7 +115,7 @@ static const struct i2c_device_id pca954x_id[] = {
 	{ "pca9543", pca_9543 },
 	{ "pca9544", pca_9544 },
 	{ "pca9545", pca_9545 },
-	{ "pca9546", pca_9545 },
+	{ "pca9546", pca_9546 },
 	{ "pca9547", pca_9547 },
 	{ "pca9548", pca_9548 },
 	{ }
-- 
2.11.0

[PATCH AUTOSEL for 4.4 24/59] r8152: prevent the driver from transmitting packets with carrier off

[alexander.levin]

From: hayeswang <hayeswang@realtek.com>

[ Upstream commit 2f25abe6bac573928a990ccbdac75873add8127e ]

The linking status may be changed when autosuspend. And, after
autoresume, the driver may try to transmit packets when the device
is carrier off, because the interrupt transfer doesn't update the
linking status, yet. And, if the device is in ALDPS mode, the device
would stop working.

The another similar case is
 1. unplug the cable.
 2. interrupt transfer queue a work_queue for linking change.
 3. device enters the ALDPS mode.
 4. a tx occurs before the work_queue is called.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/usb/r8152.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index a1dc43b9bd38..304ec25eaf95 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1207,6 +1207,7 @@ static void intr_callback(struct urb *urb)
 		}
 	} else {
 		if (netif_carrier_ok(tp->netdev)) {
+			netif_stop_queue(tp->netdev);
 			set_bit(RTL8152_LINK_CHG, &tp->flags);
 			schedule_delayed_work(&tp->schedule, 0);
 		}
@@ -3001,6 +3002,9 @@ static void set_carrier(struct r8152 *tp)
 			napi_enable(&tp->napi);
 			netif_wake_queue(netdev);
 			netif_info(tp, link, netdev, "carrier on\n");
+		} else if (netif_queue_stopped(netdev) &&
+			   skb_queue_len(&tp->tx_queue) < tp->tx_qlen) {
+			netif_wake_queue(netdev);
 		}
 	} else {
 		if (netif_carrier_ok(netdev)) {
@@ -3561,8 +3565,18 @@ static int rtl8152_resume(struct usb_interface *intf)
 			clear_bit(SELECTIVE_SUSPEND, &tp->flags);
 			napi_disable(&tp->napi);
 			set_bit(WORK_ENABLE, &tp->flags);
-			if (netif_carrier_ok(tp->netdev))
-				rtl_start_rx(tp);
+
+			if (netif_carrier_ok(tp->netdev)) {
+				if (rtl8152_get_speed(tp) & LINK_STATUS) {
+					rtl_start_rx(tp);
+				} else {
+					netif_carrier_off(tp->netdev);
+					tp->rtl_ops.disable(tp);
+					netif_info(tp, link, tp->netdev,
+						   "linking down\n");
+				}
+			}
+
 			napi_enable(&tp->napi);
 		} else {
 			tp->rtl_ops.up(tp);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 21/59] hwmon: (asus_atk0110) fix uninitialized data access

[alexander.levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit a2125d02443e9a4e68bcfd9f8004fa23239e8329 ]

The latest gcc-7 snapshot adds a warning to point out that when
atk_read_value_old or atk_read_value_new fails, we copy
uninitialized data into sensor->cached_value:

drivers/hwmon/asus_atk0110.c: In function 'atk_input_show':
drivers/hwmon/asus_atk0110.c:651:26: error: 'value' may be used uninitialized in this function [-Werror=maybe-uninitialized]

Adding an error check avoids this. All versions of the driver
are affected.

Fixes: 2c03d07ad54d ("hwmon: Add Asus ATK0110 support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/hwmon/asus_atk0110.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index cccef87963e0..975c43d446f8 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -646,6 +646,9 @@ static int atk_read_value(struct atk_sensor_data *sensor, u64 *value)
 		else
 			err = atk_read_value_new(sensor, value);
 
+		if (err)
+			return err;
+
 		sensor->is_valid = true;
 		sensor->last_updated = jiffies;
 		sensor->cached_value = *value;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 23/59] HID: xinmo: fix for out of range for THT 2P arcade controller.

[alexander.levin]

From: Peter Stein <peter@stuntstein.dk>

[ Upstream commit 9257821c5a1dc57ef3a37f7cbcebaf548395c964 ]

There is a new clone of the XIN MO arcade controller which has same issue with
out of range like the original.  This fix will solve the issue where 2
directions on the joystick are not recognized by the new THT 2P arcade
controller with device ID 0x75e1.  In details the new device ID is added the
hid-id list and the hid-xinmo source code.

Signed-off-by: Peter Stein <peter@stuntstein.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/hid/hid-core.c  | 1 +
 drivers/hid/hid-ids.h   | 1 +
 drivers/hid/hid-xinmo.c | 1 +
 3 files changed, 3 insertions(+)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 11a051bd8a8b..a474d358d76a 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2052,6 +2052,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_X_TENSIONS, USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_THT_2P_ARCADE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 37cbc2ecfc5f..66e295c1a158 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1020,6 +1020,7 @@
 
 #define USB_VENDOR_ID_XIN_MO			0x16c0
 #define USB_DEVICE_ID_XIN_MO_DUAL_ARCADE	0x05e1
+#define USB_DEVICE_ID_THT_2P_ARCADE		0x75e1
 
 #define USB_VENDOR_ID_XIROKU		0x1477
 #define USB_DEVICE_ID_XIROKU_SPX	0x1006
diff --git a/drivers/hid/hid-xinmo.c b/drivers/hid/hid-xinmo.c
index 7df5227a7e61..9ad7731d2e10 100644
--- a/drivers/hid/hid-xinmo.c
+++ b/drivers/hid/hid-xinmo.c
@@ -46,6 +46,7 @@ static int xinmo_event(struct hid_device *hdev, struct hid_field *field,
 
 static const struct hid_device_id xinmo_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_THT_2P_ARCADE) },
 	{ }
 };
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 28/59] i40e: Do not enable NAPI on q_vectors that have no rings

[alexander.levin]

From: Alexander Duyck <alexander.h.duyck@intel.com>

[ Upstream commit 13a8cd191a2b470cfd435b3b57dbd21aa65ff78c ]

When testing the epoll w/ busy poll code I found that I could get into a
state where the i40e driver had q_vectors w/ active NAPI that had no rings.
This was resulting in a divide by zero error.  To correct it I am updating
the driver code so that we only support NAPI on q_vectors that have 1 or
more rings allocated to them.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index b5b228c9a030..06b38f50980c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4201,8 +4201,12 @@ static void i40e_napi_enable_all(struct i40e_vsi *vsi)
 	if (!vsi->netdev)
 		return;
 
-	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
-		napi_enable(&vsi->q_vectors[q_idx]->napi);
+	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++) {
+		struct i40e_q_vector *q_vector = vsi->q_vectors[q_idx];
+
+		if (q_vector->rx.ring || q_vector->tx.ring)
+			napi_enable(&q_vector->napi);
+	}
 }
 
 /**
@@ -4216,8 +4220,12 @@ static void i40e_napi_disable_all(struct i40e_vsi *vsi)
 	if (!vsi->netdev)
 		return;
 
-	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
-		napi_disable(&vsi->q_vectors[q_idx]->napi);
+	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++) {
+		struct i40e_q_vector *q_vector = vsi->q_vectors[q_idx];
+
+		if (q_vector->rx.ring || q_vector->tx.ring)
+			napi_disable(&q_vector->napi);
+	}
 }
 
 /**
-- 
2.11.0

[PATCH AUTOSEL for 4.4 25/59] s390/qeth: no ETH header for outbound AF_IUCV

[alexander.levin]

From: Julian Wiedmann <jwi@linux.vnet.ibm.com>

[ Upstream commit acd9776b5c45ef02d1a210969a6fcc058afb76e3 ]

With AF_IUCV traffic, the skb passed to hard_start_xmit() has a 14 byte
slot at skb->data, intended for an ETH header. qeth_l3_fill_af_iucv_hdr()
fills this ETH header... and then immediately moves it to the
skb's headroom, where it disappears and is never seen again.

But it's still possible for us to return NETDEV_TX_BUSY after the skb has
been modified. Since we didn't get a private copy of the skb, the next
time the skb is delivered to hard_start_xmit() it no longer has the
expected layout (we moved the ETH header to the headroom, so skb->data
now starts at the IUCV_TRANS header). So when qeth_l3_fill_af_iucv_hdr()
does another round of rebuilding, the resulting qeth header ends up
all wrong. On transmission, the buffer is then rejected by
the HiperSockets device with SBALF15 = x'04'.
When this error is passed back to af_iucv as TX_NOTIFY_UNREACHABLE, it
tears down the offending socket.

As the ETH header for AF_IUCV serves no purpose, just align the code to
what we do for IP traffic on L3 HiperSockets: keep the ETH header at
skb->data, and pass down data_offset = ETH_HLEN to qeth_fill_buffer().
When mapping the payload into the SBAL elements, the ETH header is then
stripped off. This avoids the skb manipulations in
qeth_l3_fill_af_iucv_hdr(), and any buffer re-entering hard_start_xmit()
after NETDEV_TX_BUSY is now processed properly.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/s390/net/qeth_l3_main.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index bf3c1b2301db..0d6888cbd96e 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2680,17 +2680,13 @@ static void qeth_l3_fill_af_iucv_hdr(struct qeth_card *card,
 	char daddr[16];
 	struct af_iucv_trans_hdr *iucv_hdr;
 
-	skb_pull(skb, 14);
-	card->dev->header_ops->create(skb, card->dev, 0,
-				      card->dev->dev_addr, card->dev->dev_addr,
-				      card->dev->addr_len);
-	skb_pull(skb, 14);
-	iucv_hdr = (struct af_iucv_trans_hdr *)skb->data;
 	memset(hdr, 0, sizeof(struct qeth_hdr));
 	hdr->hdr.l3.id = QETH_HEADER_TYPE_LAYER3;
 	hdr->hdr.l3.ext_flags = 0;
-	hdr->hdr.l3.length = skb->len;
+	hdr->hdr.l3.length = skb->len - ETH_HLEN;
 	hdr->hdr.l3.flags = QETH_HDR_IPV6 | QETH_CAST_UNICAST;
+
+	iucv_hdr = (struct af_iucv_trans_hdr *) (skb->data + ETH_HLEN);
 	memset(daddr, 0, sizeof(daddr));
 	daddr[0] = 0xfe;
 	daddr[1] = 0x80;
@@ -2873,10 +2869,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
 	    (skb_shinfo(skb)->nr_frags == 0)) {
 		new_skb = skb;
-		if (new_skb->protocol == ETH_P_AF_IUCV)
-			data_offset = 0;
-		else
-			data_offset = ETH_HLEN;
+		data_offset = ETH_HLEN;
 		hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC);
 		if (!hdr)
 			goto tx_drop;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 26/59] bna: avoid writing uninitialized data into hw registers

[alexander.levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit a5af83925363eb85d467933e3d6ec5a87001eb7c ]

The latest gcc-7 snapshot warns about bfa_ioc_send_enable/bfa_ioc_send_disable
writing undefined values into the hardware registers:

drivers/net/ethernet/brocade/bna/bfa_ioc.c: In function 'bfa_iocpf_sm_disabling_entry':
arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+4)' is used uninitialized in this function [-Werror=uninitialized]
arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+8)' is used uninitialized in this function [-Werror=uninitialized]

The two functions look like they should do the same thing, but only one
of them initializes the time stamp and clscode field. The fact that we
only get a warning for one of the two functions seems to be arbitrary,
based on the inlining decisions in the compiler.

To address this, I'm making both functions do the same thing:

- set the clscode from the ioc structure in both
- set the time stamp from ktime_get_real_seconds (which also
  avoids the signed-integer overflow in 2038 and extends the
  well-defined behavior until 2106).
- zero-fill the reserved field

Fixes: 8b230ed8ec96 ("bna: Brocade 10Gb Ethernet device driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/brocade/bna/bfa_ioc.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index 9e59663a6ead..0f6811860ad5 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -1930,13 +1930,13 @@ static void
 bfa_ioc_send_enable(struct bfa_ioc *ioc)
 {
 	struct bfi_ioc_ctrl_req enable_req;
-	struct timeval tv;
 
 	bfi_h2i_set(enable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_ENABLE_REQ,
 		    bfa_ioc_portid(ioc));
 	enable_req.clscode = htons(ioc->clscode);
-	do_gettimeofday(&tv);
-	enable_req.tv_sec = ntohl(tv.tv_sec);
+	enable_req.rsvd = htons(0);
+	/* overflow in 2106 */
+	enable_req.tv_sec = ntohl(ktime_get_real_seconds());
 	bfa_ioc_mbox_send(ioc, &enable_req, sizeof(struct bfi_ioc_ctrl_req));
 }
 
@@ -1947,6 +1947,10 @@ bfa_ioc_send_disable(struct bfa_ioc *ioc)
 
 	bfi_h2i_set(disable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_DISABLE_REQ,
 		    bfa_ioc_portid(ioc));
+	disable_req.clscode = htons(ioc->clscode);
+	disable_req.rsvd = htons(0);
+	/* overflow in 2106 */
+	disable_req.tv_sec = ntohl(ktime_get_real_seconds());
 	bfa_ioc_mbox_send(ioc, &disable_req, sizeof(struct bfi_ioc_ctrl_req));
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 27/59] net: Do not allow negative values for busy_read and busy_poll sysctl interfaces

[alexander.levin]

From: Alexander Duyck <alexander.h.duyck@intel.com>

[ Upstream commit 95f255211396958c718aef8c45e3923b5211ea7b ]

This change basically codifies what I think was already the limitations on
the busy_poll and busy_read sysctl interfaces.  We weren't checking the
lower bounds and as such could input negative values. The behavior when
that was used was dependent on the architecture. In order to prevent any
issues with that I am just disabling support for values less than 0 since
this way we don't have to worry about any odd behaviors.

By limiting the sysctl values this way it also makes it consistent with how
we handle the SO_BUSY_POLL socket option since the value appears to be
reported as a signed integer value and negative values are rejected.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/core/sysctl_net_core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index a6beb7b6ae55..f5ef2115871f 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -360,14 +360,16 @@ static struct ctl_table net_core_table[] = {
 		.data		= &sysctl_net_busy_poll,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
 	},
 	{
 		.procname	= "busy_read",
 		.data		= &sysctl_net_busy_read,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
 	},
 #endif
 #ifdef CONFIG_NET_SCHED
-- 
2.11.0

[PATCH AUTOSEL for 4.4 29/59] RDMA/iser: Fix possible mr leak on device removal event

[alexander.levin]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit ea174c9573b0e0c8bc1a7a90fe9360ccb7aa9cbb ]

When the rdma device is removed, we must cleanup all
the rdma resources within the DEVICE_REMOVAL event
handler to let the device teardown gracefully. When
this happens with live I/O, some memory regions are
occupied. Thus, track them too and dereg all the mr's.

We are safe with mr access by iscsi_iser_cleanup_task.

Reported-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/infiniband/ulp/iser/iscsi_iser.h | 2 ++
 drivers/infiniband/ulp/iser/iser_verbs.c | 8 +++++---
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h
index 8a5998e6a407..88f97ea6b366 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.h
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.h
@@ -450,6 +450,7 @@ struct iser_fr_desc {
 	struct list_head		  list;
 	struct iser_reg_resources	  rsc;
 	struct iser_pi_context		 *pi_ctx;
+	struct list_head                  all_list;
 };
 
 /**
@@ -463,6 +464,7 @@ struct iser_fr_pool {
 	struct list_head        list;
 	spinlock_t              lock;
 	int                     size;
+	struct list_head        all_list;
 };
 
 /**
diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index 42f4da620f2e..0cbc7ceb9a55 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -405,6 +405,7 @@ int iser_alloc_fastreg_pool(struct ib_conn *ib_conn,
 	int i, ret;
 
 	INIT_LIST_HEAD(&fr_pool->list);
+	INIT_LIST_HEAD(&fr_pool->all_list);
 	spin_lock_init(&fr_pool->lock);
 	fr_pool->size = 0;
 	for (i = 0; i < cmds_max; i++) {
@@ -416,6 +417,7 @@ int iser_alloc_fastreg_pool(struct ib_conn *ib_conn,
 		}
 
 		list_add_tail(&desc->list, &fr_pool->list);
+		list_add_tail(&desc->all_list, &fr_pool->all_list);
 		fr_pool->size++;
 	}
 
@@ -435,13 +437,13 @@ void iser_free_fastreg_pool(struct ib_conn *ib_conn)
 	struct iser_fr_desc *desc, *tmp;
 	int i = 0;
 
-	if (list_empty(&fr_pool->list))
+	if (list_empty(&fr_pool->all_list))
 		return;
 
 	iser_info("freeing conn %p fr pool\n", ib_conn);
 
-	list_for_each_entry_safe(desc, tmp, &fr_pool->list, list) {
-		list_del(&desc->list);
+	list_for_each_entry_safe(desc, tmp, &fr_pool->all_list, all_list) {
+		list_del(&desc->all_list);
 		iser_free_reg_res(&desc->rsc);
 		if (desc->pi_ctx)
 			iser_free_pi_ctx(desc->pi_ctx);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 31/59] netfilter: nfnl_cthelper: fix a race when walk the nf_ct_helper_hash table

[alexander.levin]

From: Liping Zhang <zlpnobody@gmail.com>

[ Upstream commit 83d90219a5df8d950855ce73229a97b63605c317 ]

The nf_ct_helper_hash table is protected by nf_ct_helper_mutex, while
nfct_helper operation is protected by nfnl_lock(NFNL_SUBSYS_CTHELPER).
So it's possible that one CPU is walking the nf_ct_helper_hash for
cthelper add/get/del, another cpu is doing nf_conntrack_helpers_unregister
at the same time. This is dangrous, and may cause use after free error.

Note, delete operation will flush all cthelpers added via nfnetlink, so
using rcu to do protect is not easy.

Now introduce a dummy list to record all the cthelpers added via
nfnetlink, then we can walk the dummy list instead of walking the
nf_ct_helper_hash. Also, keep nfnl_cthelper_dump_table unchanged, it
may be invoked without nfnl_lock(NFNL_SUBSYS_CTHELPER) held.

Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/netfilter/nfnetlink_cthelper.c | 177 +++++++++++++++++--------------------
 1 file changed, 81 insertions(+), 96 deletions(-)

diff --git a/net/netfilter/nfnetlink_cthelper.c b/net/netfilter/nfnetlink_cthelper.c
index f24d2cec02fb..8d34a488efc0 100644
--- a/net/netfilter/nfnetlink_cthelper.c
+++ b/net/netfilter/nfnetlink_cthelper.c
@@ -32,6 +32,13 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Pablo Neira Ayuso <pablo@netfilter.org>");
 MODULE_DESCRIPTION("nfnl_cthelper: User-space connection tracking helpers");
 
+struct nfnl_cthelper {
+	struct list_head		list;
+	struct nf_conntrack_helper	helper;
+};
+
+static LIST_HEAD(nfnl_cthelper_list);
+
 static int
 nfnl_userspace_cthelper(struct sk_buff *skb, unsigned int protoff,
 			struct nf_conn *ct, enum ip_conntrack_info ctinfo)
@@ -205,14 +212,16 @@ nfnl_cthelper_create(const struct nlattr * const tb[],
 		     struct nf_conntrack_tuple *tuple)
 {
 	struct nf_conntrack_helper *helper;
+	struct nfnl_cthelper *nfcth;
 	int ret;
 
 	if (!tb[NFCTH_TUPLE] || !tb[NFCTH_POLICY] || !tb[NFCTH_PRIV_DATA_LEN])
 		return -EINVAL;
 
-	helper = kzalloc(sizeof(struct nf_conntrack_helper), GFP_KERNEL);
-	if (helper == NULL)
+	nfcth = kzalloc(sizeof(*nfcth), GFP_KERNEL);
+	if (nfcth == NULL)
 		return -ENOMEM;
+	helper = &nfcth->helper;
 
 	ret = nfnl_cthelper_parse_expect_policy(helper, tb[NFCTH_POLICY]);
 	if (ret < 0)
@@ -249,11 +258,12 @@ nfnl_cthelper_create(const struct nlattr * const tb[],
 	if (ret < 0)
 		goto err2;
 
+	list_add_tail(&nfcth->list, &nfnl_cthelper_list);
 	return 0;
 err2:
 	kfree(helper->expect_policy);
 err1:
-	kfree(helper);
+	kfree(nfcth);
 	return ret;
 }
 
@@ -379,7 +389,8 @@ nfnl_cthelper_new(struct sock *nfnl, struct sk_buff *skb,
 	const char *helper_name;
 	struct nf_conntrack_helper *cur, *helper = NULL;
 	struct nf_conntrack_tuple tuple;
-	int ret = 0, i;
+	struct nfnl_cthelper *nlcth;
+	int ret = 0;
 
 	if (!tb[NFCTH_NAME] || !tb[NFCTH_TUPLE])
 		return -EINVAL;
@@ -390,31 +401,22 @@ nfnl_cthelper_new(struct sock *nfnl, struct sk_buff *skb,
 	if (ret < 0)
 		return ret;
 
-	rcu_read_lock();
-	for (i = 0; i < nf_ct_helper_hsize && !helper; i++) {
-		hlist_for_each_entry_rcu(cur, &nf_ct_helper_hash[i], hnode) {
+	list_for_each_entry(nlcth, &nfnl_cthelper_list, list) {
+		cur = &nlcth->helper;
 
-			/* skip non-userspace conntrack helpers. */
-			if (!(cur->flags & NF_CT_HELPER_F_USERSPACE))
-				continue;
+		if (strncmp(cur->name, helper_name, NF_CT_HELPER_NAME_LEN))
+			continue;
 
-			if (strncmp(cur->name, helper_name,
-					NF_CT_HELPER_NAME_LEN) != 0)
-				continue;
+		if ((tuple.src.l3num != cur->tuple.src.l3num ||
+		     tuple.dst.protonum != cur->tuple.dst.protonum))
+			continue;
 
-			if ((tuple.src.l3num != cur->tuple.src.l3num ||
-			     tuple.dst.protonum != cur->tuple.dst.protonum))
-				continue;
+		if (nlh->nlmsg_flags & NLM_F_EXCL)
+			return -EEXIST;
 
-			if (nlh->nlmsg_flags & NLM_F_EXCL) {
-				ret = -EEXIST;
-				goto err;
-			}
-			helper = cur;
-			break;
-		}
+		helper = cur;
+		break;
 	}
-	rcu_read_unlock();
 
 	if (helper == NULL)
 		ret = nfnl_cthelper_create(tb, &tuple);
@@ -422,9 +424,6 @@ nfnl_cthelper_new(struct sock *nfnl, struct sk_buff *skb,
 		ret = nfnl_cthelper_update(tb, helper);
 
 	return ret;
-err:
-	rcu_read_unlock();
-	return ret;
 }
 
 static int
@@ -588,11 +587,12 @@ static int
 nfnl_cthelper_get(struct sock *nfnl, struct sk_buff *skb,
 		  const struct nlmsghdr *nlh, const struct nlattr * const tb[])
 {
-	int ret = -ENOENT, i;
+	int ret = -ENOENT;
 	struct nf_conntrack_helper *cur;
 	struct sk_buff *skb2;
 	char *helper_name = NULL;
 	struct nf_conntrack_tuple tuple;
+	struct nfnl_cthelper *nlcth;
 	bool tuple_set = false;
 
 	if (nlh->nlmsg_flags & NLM_F_DUMP) {
@@ -613,45 +613,39 @@ nfnl_cthelper_get(struct sock *nfnl, struct sk_buff *skb,
 		tuple_set = true;
 	}
 
-	for (i = 0; i < nf_ct_helper_hsize; i++) {
-		hlist_for_each_entry_rcu(cur, &nf_ct_helper_hash[i], hnode) {
+	list_for_each_entry(nlcth, &nfnl_cthelper_list, list) {
+		cur = &nlcth->helper;
+		if (helper_name &&
+		    strncmp(cur->name, helper_name, NF_CT_HELPER_NAME_LEN))
+			continue;
 
-			/* skip non-userspace conntrack helpers. */
-			if (!(cur->flags & NF_CT_HELPER_F_USERSPACE))
-				continue;
+		if (tuple_set &&
+		    (tuple.src.l3num != cur->tuple.src.l3num ||
+		     tuple.dst.protonum != cur->tuple.dst.protonum))
+			continue;
 
-			if (helper_name && strncmp(cur->name, helper_name,
-						NF_CT_HELPER_NAME_LEN) != 0) {
-				continue;
-			}
-			if (tuple_set &&
-			    (tuple.src.l3num != cur->tuple.src.l3num ||
-			     tuple.dst.protonum != cur->tuple.dst.protonum))
-				continue;
-
-			skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
-			if (skb2 == NULL) {
-				ret = -ENOMEM;
-				break;
-			}
+		skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+		if (skb2 == NULL) {
+			ret = -ENOMEM;
+			break;
+		}
 
-			ret = nfnl_cthelper_fill_info(skb2, NETLINK_CB(skb).portid,
-						nlh->nlmsg_seq,
-						NFNL_MSG_TYPE(nlh->nlmsg_type),
-						NFNL_MSG_CTHELPER_NEW, cur);
-			if (ret <= 0) {
-				kfree_skb(skb2);
-				break;
-			}
+		ret = nfnl_cthelper_fill_info(skb2, NETLINK_CB(skb).portid,
+					      nlh->nlmsg_seq,
+					      NFNL_MSG_TYPE(nlh->nlmsg_type),
+					      NFNL_MSG_CTHELPER_NEW, cur);
+		if (ret <= 0) {
+			kfree_skb(skb2);
+			break;
+		}
 
-			ret = netlink_unicast(nfnl, skb2, NETLINK_CB(skb).portid,
-						MSG_DONTWAIT);
-			if (ret > 0)
-				ret = 0;
+		ret = netlink_unicast(nfnl, skb2, NETLINK_CB(skb).portid,
+				      MSG_DONTWAIT);
+		if (ret > 0)
+			ret = 0;
 
-			/* this avoids a loop in nfnetlink. */
-			return ret == -EAGAIN ? -ENOBUFS : ret;
-		}
+		/* this avoids a loop in nfnetlink. */
+		return ret == -EAGAIN ? -ENOBUFS : ret;
 	}
 	return ret;
 }
@@ -662,10 +656,10 @@ nfnl_cthelper_del(struct sock *nfnl, struct sk_buff *skb,
 {
 	char *helper_name = NULL;
 	struct nf_conntrack_helper *cur;
-	struct hlist_node *tmp;
 	struct nf_conntrack_tuple tuple;
 	bool tuple_set = false, found = false;
-	int i, j = 0, ret;
+	struct nfnl_cthelper *nlcth, *n;
+	int j = 0, ret;
 
 	if (tb[NFCTH_NAME])
 		helper_name = nla_data(tb[NFCTH_NAME]);
@@ -678,30 +672,27 @@ nfnl_cthelper_del(struct sock *nfnl, struct sk_buff *skb,
 		tuple_set = true;
 	}
 
-	for (i = 0; i < nf_ct_helper_hsize; i++) {
-		hlist_for_each_entry_safe(cur, tmp, &nf_ct_helper_hash[i],
-								hnode) {
-			/* skip non-userspace conntrack helpers. */
-			if (!(cur->flags & NF_CT_HELPER_F_USERSPACE))
-				continue;
+	list_for_each_entry_safe(nlcth, n, &nfnl_cthelper_list, list) {
+		cur = &nlcth->helper;
+		j++;
 
-			j++;
+		if (helper_name &&
+		    strncmp(cur->name, helper_name, NF_CT_HELPER_NAME_LEN))
+			continue;
 
-			if (helper_name && strncmp(cur->name, helper_name,
-						NF_CT_HELPER_NAME_LEN) != 0) {
-				continue;
-			}
-			if (tuple_set &&
-			    (tuple.src.l3num != cur->tuple.src.l3num ||
-			     tuple.dst.protonum != cur->tuple.dst.protonum))
-				continue;
+		if (tuple_set &&
+		    (tuple.src.l3num != cur->tuple.src.l3num ||
+		     tuple.dst.protonum != cur->tuple.dst.protonum))
+			continue;
 
-			found = true;
-			nf_conntrack_helper_unregister(cur);
-			kfree(cur->expect_policy);
-			kfree(cur);
-		}
+		found = true;
+		nf_conntrack_helper_unregister(cur);
+		kfree(cur->expect_policy);
+
+		list_del(&nlcth->list);
+		kfree(nlcth);
 	}
+
 	/* Make sure we return success if we flush and there is no helpers */
 	return (found || j == 0) ? 0 : -ENOENT;
 }
@@ -750,22 +741,16 @@ static int __init nfnl_cthelper_init(void)
 static void __exit nfnl_cthelper_exit(void)
 {
 	struct nf_conntrack_helper *cur;
-	struct hlist_node *tmp;
-	int i;
+	struct nfnl_cthelper *nlcth, *n;
 
 	nfnetlink_subsys_unregister(&nfnl_cthelper_subsys);
 
-	for (i=0; i<nf_ct_helper_hsize; i++) {
-		hlist_for_each_entry_safe(cur, tmp, &nf_ct_helper_hash[i],
-									hnode) {
-			/* skip non-userspace conntrack helpers. */
-			if (!(cur->flags & NF_CT_HELPER_F_USERSPACE))
-				continue;
+	list_for_each_entry_safe(nlcth, n, &nfnl_cthelper_list, list) {
+		cur = &nlcth->helper;
 
-			nf_conntrack_helper_unregister(cur);
-			kfree(cur->expect_policy);
-			kfree(cur);
-		}
+		nf_conntrack_helper_unregister(cur);
+		kfree(cur->expect_policy);
+		kfree(nlcth);
 	}
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 30/59] irda: vlsi_ir: fix check for DMA mapping errors

[alexander.levin]

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

[ Upstream commit 6ac3b77a6ffff7513ff86b684aa256ea01c0e5b5 ]

vlsi_alloc_ring() checks for DMA mapping errors by comparing
returned address with zero, while pci_dma_mapping_error() should be used.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/irda/vlsi_ir.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index a0849f49bbec..c0192f97ecc8 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -418,8 +418,9 @@ static struct vlsi_ring *vlsi_alloc_ring(struct pci_dev *pdev, struct ring_descr
 		memset(rd, 0, sizeof(*rd));
 		rd->hw = hwmap + i;
 		rd->buf = kmalloc(len, GFP_KERNEL|GFP_DMA);
-		if (rd->buf == NULL ||
-		    !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) {
+		if (rd->buf)
+			busaddr = pci_map_single(pdev, rd->buf, len, dir);
+		if (rd->buf == NULL || pci_dma_mapping_error(pdev, busaddr)) {
 			if (rd->buf) {
 				net_err_ratelimited("%s: failed to create PCI-MAP for %p\n",
 						    __func__, rd->buf);
@@ -430,8 +431,7 @@ static struct vlsi_ring *vlsi_alloc_ring(struct pci_dev *pdev, struct ring_descr
 				rd = r->rd + j;
 				busaddr = rd_get_addr(rd);
 				rd_set_addr_status(rd, 0, 0);
-				if (busaddr)
-					pci_unmap_single(pdev, busaddr, len, dir);
+				pci_unmap_single(pdev, busaddr, len, dir);
 				kfree(rd->buf);
 				rd->buf = NULL;
 			}
-- 
2.11.0

[PATCH AUTOSEL for 4.4 35/59] isdn: kcapi: avoid uninitialized data

[alexander.levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit af109a2cf6a9a6271fa420ae2d64d72d86c92b7d ]

gcc-7 points out that the AVMB1_ADDCARD ioctl results in an unintialized
value ending up in the cardnr parameter:

drivers/isdn/capi/kcapi.c: In function 'old_capi_manufacturer':
drivers/isdn/capi/kcapi.c:1042:24: error: 'cdef.cardnr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
   cparams.cardnr = cdef.cardnr;

This has been broken since before the start of the git history, so
either the value is not used for anything important, or the ioctl
command doesn't get called in practice.

Setting the cardnr to zero avoids the warning and makes sure
we have consistent behavior.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/isdn/capi/kcapi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c
index 823f6985b260..dd7e38ac29bd 100644
--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -1032,6 +1032,7 @@ static int old_capi_manufacturer(unsigned int cmd, void __user *data)
 						     sizeof(avmb1_carddef))))
 				return -EFAULT;
 			cdef.cardtype = AVM_CARDTYPE_B1;
+			cdef.cardnr = 0;
 		} else {
 			if ((retval = copy_from_user(&cdef, data,
 						     sizeof(avmb1_extcarddef))))
-- 
2.11.0

[PATCH AUTOSEL for 4.4 32/59] netfilter: nf_nat_snmp: Fix panic when snmp_trap_helper fails to register

[alexander.levin]

From: Gao Feng <fgao@ikuai8.com>

[ Upstream commit 75c689dca98851d65ef5a27e5ce26b625b68751c ]

In the commit 93557f53e1fb ("netfilter: nf_conntrack: nf_conntrack snmp
helper"), the snmp_helper is replaced by nf_nat_snmp_hook. So the
snmp_helper is never registered. But it still tries to unregister the
snmp_helper, it could cause the panic.

Now remove the useless snmp_helper and the unregister call in the
error handler.

Fixes: 93557f53e1fb ("netfilter: nf_conntrack: nf_conntrack snmp helper")
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/ipv4/netfilter/nf_nat_snmp_basic.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/net/ipv4/netfilter/nf_nat_snmp_basic.c b/net/ipv4/netfilter/nf_nat_snmp_basic.c
index 2689c9c4f1a0..182eb878633d 100644
--- a/net/ipv4/netfilter/nf_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/nf_nat_snmp_basic.c
@@ -1260,16 +1260,6 @@ static const struct nf_conntrack_expect_policy snmp_exp_policy = {
 	.timeout	= 180,
 };
 
-static struct nf_conntrack_helper snmp_helper __read_mostly = {
-	.me			= THIS_MODULE,
-	.help			= help,
-	.expect_policy		= &snmp_exp_policy,
-	.name			= "snmp",
-	.tuple.src.l3num	= AF_INET,
-	.tuple.src.u.udp.port	= cpu_to_be16(SNMP_PORT),
-	.tuple.dst.protonum	= IPPROTO_UDP,
-};
-
 static struct nf_conntrack_helper snmp_trap_helper __read_mostly = {
 	.me			= THIS_MODULE,
 	.help			= help,
@@ -1288,17 +1278,10 @@ static struct nf_conntrack_helper snmp_trap_helper __read_mostly = {
 
 static int __init nf_nat_snmp_basic_init(void)
 {
-	int ret = 0;
-
 	BUG_ON(nf_nat_snmp_hook != NULL);
 	RCU_INIT_POINTER(nf_nat_snmp_hook, help);
 
-	ret = nf_conntrack_helper_register(&snmp_trap_helper);
-	if (ret < 0) {
-		nf_conntrack_helper_unregister(&snmp_helper);
-		return ret;
-	}
-	return ret;
+	return nf_conntrack_helper_register(&snmp_trap_helper);
 }
 
 static void __exit nf_nat_snmp_basic_fini(void)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 34/59] KVM: pci-assign: do not map smm memory slot pages in vt-d page tables

[alexander.levin]

From: "Herongguang (Stephen)" <herongguang.he@huawei.com>

[ Upstream commit 0292e169b2d9c8377a168778f0b16eadb1f578fd ]

or VM memory are not put thus leaked in kvm_iommu_unmap_memslots() when
destroy VM.

This is consistent with current vfio implementation.

Signed-off-by: herongguang <herongguang.he@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 virt/kvm/kvm_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index cb092bd9965b..d080f06fd8d9 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -986,7 +986,7 @@ int __kvm_set_memory_region(struct kvm *kvm,
 	 * changes) is disallowed above, so any other attribute changes getting
 	 * here can be skipped.
 	 */
-	if ((change == KVM_MR_CREATE) || (change == KVM_MR_MOVE)) {
+	if (as_id == 0 && (change == KVM_MR_CREATE || change == KVM_MR_MOVE)) {
 		r = kvm_iommu_map_pages(kvm, &new);
 		return r;
 	}
-- 
2.11.0

[PATCH AUTOSEL for 4.4 33/59] ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend

[alexander.levin]

From: "Reizer, Eyal" <eyalr@ti.com>

[ Upstream commit 9bcf53f34a2c1cebc45cc12e273dcd5f51fbc099 ]

mmc2 used for wl12xx was missing the keep-power-in suspend
parameter. As a result the board couldn't reach suspend state.

Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/arm/boot/dts/am335x-evmsk.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 89442e98a837..3af570517903 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -668,6 +668,7 @@
 	ti,non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 36/59] xhci: plat: Register shutdown for xhci_plat

[alexander.levin]

From: Adam Wallis <awallis@codeaurora.org>

[ Upstream commit b07c12517f2aed0add8ce18146bb426b14099392 ]

Shutdown should be called for xhci_plat devices especially for
situations where kexec might be used by stopping DMA
transactions.

Signed-off-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/usb/host/xhci-plat.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 062cf8a84a59..7afd607ea60f 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -284,6 +284,7 @@ MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
 static struct platform_driver usb_xhci_driver = {
 	.probe	= xhci_plat_probe,
 	.remove	= xhci_plat_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
 	.driver	= {
 		.name = "xhci-hcd",
 		.pm = DEV_PM_OPS,
-- 
2.11.0

[PATCH AUTOSEL for 4.4 37/59] netfilter: nfnetlink_queue: fix secctx memory leak

[alexander.levin]

From: Liping Zhang <zlpnobody@gmail.com>

[ Upstream commit 77c1c03c5b8ef28e55bb0aff29b1e006037ca645 ]

We must call security_release_secctx to free the memory returned by
security_secid_to_secctx, otherwise memory may be leaked forever.

Fixes: ef493bd930ae ("netfilter: nfnetlink_queue: add security context information")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/netfilter/nfnetlink_queue.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 861c6615253b..f6837f9b6d6c 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -390,7 +390,7 @@ nfqnl_build_packet_message(struct net *net, struct nfqnl_instance *queue,
 				  GFP_ATOMIC);
 	if (!skb) {
 		skb_tx_error(entskb);
-		return NULL;
+		goto nlmsg_failure;
 	}
 
 	nlh = nlmsg_put(skb, 0, 0,
@@ -399,7 +399,7 @@ nfqnl_build_packet_message(struct net *net, struct nfqnl_instance *queue,
 	if (!nlh) {
 		skb_tx_error(entskb);
 		kfree_skb(skb);
-		return NULL;
+		goto nlmsg_failure;
 	}
 	nfmsg = nlmsg_data(nlh);
 	nfmsg->nfgen_family = entry->state.pf;
@@ -542,12 +542,17 @@ nfqnl_build_packet_message(struct net *net, struct nfqnl_instance *queue,
 	}
 
 	nlh->nlmsg_len = skb->len;
+	if (seclen)
+		security_release_secctx(secdata, seclen);
 	return skb;
 
 nla_put_failure:
 	skb_tx_error(entskb);
 	kfree_skb(skb);
 	net_err_ratelimited("nf_queue: error creating packet message\n");
+nlmsg_failure:
+	if (seclen)
+		security_release_secctx(secdata, seclen);
 	return NULL;
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 39/59] cpuidle: powernv: Pass correct drv->cpumask for registration

[alexander.levin]

From: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>

[ Upstream commit 293d264f13cbde328d5477f49e3103edbc1dc191 ]

drv->cpumask defaults to cpu_possible_mask in __cpuidle_driver_init().
On PowerNV platform cpu_present could be less than cpu_possible in cases
where firmware detects the cpu, but it is not available to the OS.  When
CONFIG_HOTPLUG_CPU=n, such cpus are not hotplugable at runtime and hence
we skip creating cpu_device.

This breaks cpuidle on powernv where register_cpu() is not called for
cpus in cpu_possible_mask that cannot be hot-added at runtime.

Trying cpuidle_register_device() on cpu without cpu_device will cause
crash like this:

cpu 0xf: Vector: 380 (Data SLB Access) at [c000000ff1503490]
    pc: c00000000022c8bc: string+0x34/0x60
    lr: c00000000022ed78: vsnprintf+0x284/0x42c
    sp: c000000ff1503710
   msr: 9000000000009033
   dar: 6000000060000000
  current = 0xc000000ff1480000
  paca    = 0xc00000000fe82d00   softe: 0        irq_happened: 0x01
    pid   = 1, comm = swapper/8
Linux version 4.11.0-rc2 (sv@sagarika) (gcc version 4.9.4
(Buildroot 2017.02-00004-gc28573e) ) #15 SMP Fri Mar 17 19:32:02 IST 2017
enter ? for help
[link register   ] c00000000022ed78 vsnprintf+0x284/0x42c
[c000000ff1503710] c00000000022ebb8 vsnprintf+0xc4/0x42c (unreliable)
[c000000ff1503800] c00000000022ef40 vscnprintf+0x20/0x44
[c000000ff1503830] c0000000000ab61c vprintk_emit+0x94/0x2cc
[c000000ff15038a0] c0000000000acc9c vprintk_func+0x60/0x74
[c000000ff15038c0] c000000000619694 printk+0x38/0x4c
[c000000ff15038e0] c000000000224950 kobject_get+0x40/0x60
[c000000ff1503950] c00000000022507c kobject_add_internal+0x60/0x2c4
[c000000ff15039e0] c000000000225350 kobject_init_and_add+0x70/0x78
[c000000ff1503a60] c00000000053c288 cpuidle_add_sysfs+0x9c/0xe0
[c000000ff1503ae0] c00000000053aeac cpuidle_register_device+0xd4/0x12c
[c000000ff1503b30] c00000000053b108 cpuidle_register+0x98/0xcc
[c000000ff1503bc0] c00000000085eaf0 powernv_processor_idle_init+0x140/0x1e0
[c000000ff1503c60] c00000000000cd60 do_one_initcall+0xc0/0x15c
[c000000ff1503d20] c000000000833e84 kernel_init_freeable+0x1a0/0x25c
[c000000ff1503dc0] c00000000000d478 kernel_init+0x24/0x12c
[c000000ff1503e30] c00000000000b564 ret_from_kernel_thread+0x5c/0x78

This patch fixes the bug by passing correct cpumask from
powernv-cpuidle driver.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
[ rjw: Comment massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/cpuidle/cpuidle-powernv.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
index 845bafcfa792..d5c5a476360f 100644
--- a/drivers/cpuidle/cpuidle-powernv.c
+++ b/drivers/cpuidle/cpuidle-powernv.c
@@ -160,6 +160,24 @@ static int powernv_cpuidle_driver_init(void)
 		drv->state_count += 1;
 	}
 
+	/*
+	 * On the PowerNV platform cpu_present may be less than cpu_possible in
+	 * cases when firmware detects the CPU, but it is not available to the
+	 * OS.  If CONFIG_HOTPLUG_CPU=n, then such CPUs are not hotplugable at
+	 * run time and hence cpu_devices are not created for those CPUs by the
+	 * generic topology_init().
+	 *
+	 * drv->cpumask defaults to cpu_possible_mask in
+	 * __cpuidle_driver_init().  This breaks cpuidle on PowerNV where
+	 * cpu_devices are not created for CPUs in cpu_possible_mask that
+	 * cannot be hot-added later at run time.
+	 *
+	 * Trying cpuidle_register_device() on a CPU without a cpu_device is
+	 * incorrect, so pass a correct CPU mask to the generic cpuidle driver.
+	 */
+
+	drv->cpumask = (struct cpumask *)cpu_present_mask;
+
 	return 0;
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 38/59] ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory

[alexander.levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 916a008b4b8ecc02fbd035cfb133773dba1ff3d7 ]

dma_get_sgtable() tries to create a scatterlist table containing valid
struct page pointers for the coherent memory allocation passed in to it.

However, memory can be declared via dma_declare_coherent_memory(), or
via other reservation schemes which means that coherent memory is not
guaranteed to be backed by struct pages.  In such cases, the resulting
scatterlist table contains pointers to invalid pages, which causes
kernel oops later.

This patch adds detection of such memory, and refuses to create a
scatterlist table for such memory.

Reported-by: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/arm/mm/dma-mapping.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 534a60ae282e..613c1d06316a 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -774,13 +774,31 @@ static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_add
 	__arm_dma_free(dev, size, cpu_addr, handle, attrs, true);
 }
 
+/*
+ * The whole dma_get_sgtable() idea is fundamentally unsafe - it seems
+ * that the intention is to allow exporting memory allocated via the
+ * coherent DMA APIs through the dma_buf API, which only accepts a
+ * scattertable.  This presents a couple of problems:
+ * 1. Not all memory allocated via the coherent DMA APIs is backed by
+ *    a struct page
+ * 2. Passing coherent DMA memory into the streaming APIs is not allowed
+ *    as we will try to flush the memory through a different alias to that
+ *    actually being used (and the flushes are redundant.)
+ */
 int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
 		 void *cpu_addr, dma_addr_t handle, size_t size,
 		 struct dma_attrs *attrs)
 {
-	struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
+	unsigned long pfn = dma_to_pfn(dev, handle);
+	struct page *page;
 	int ret;
 
+	/* If the PFN is not valid, we do not have a struct page */
+	if (!pfn_valid(pfn))
+		return -ENXIO;
+
+	page = pfn_to_page(pfn);
+
 	ret = sg_alloc_table(sgt, 1, GFP_KERNEL);
 	if (unlikely(ret))
 		return ret;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 41/59] backlight: pwm_bl: Fix overflow condition

[alexander.levin]

From: Derek Basehore <dbasehore@chromium.org>

[ Upstream commit 5d0c49acebc9488e37db95f1d4a55644e545ffe7 ]

This fixes an overflow condition that can happen with high max
brightness and period values in compute_duty_cycle. This fixes it by
using a 64 bit variable for computing the duty cycle.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/video/backlight/pwm_bl.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index ae3c6b6fd5db..d0c79153081d 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -79,14 +79,17 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
 static int compute_duty_cycle(struct pwm_bl_data *pb, int brightness)
 {
 	unsigned int lth = pb->lth_brightness;
-	int duty_cycle;
+	u64 duty_cycle;
 
 	if (pb->levels)
 		duty_cycle = pb->levels[brightness];
 	else
 		duty_cycle = brightness;
 
-	return (duty_cycle * (pb->period - lth) / pb->scale) + lth;
+	duty_cycle *= pb->period - lth;
+	do_div(duty_cycle, pb->scale);
+
+	return duty_cycle + lth;
 }
 
 static int pwm_backlight_update_status(struct backlight_device *bl)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 42/59] crypto: crypto4xx - increase context and scatter ring buffer elements

[alexander.levin]

From: Christian Lamparter <chunkeey@gmail.com>

[ Upstream commit 778f81d6cdb7d25360f082ac0384d5103f04eca5 ]

If crypto4xx is used in conjunction with dm-crypt, the available
ring buffer elements are not enough to handle the load properly.

On an aes-cbc-essiv:sha256 encrypted swap partition the read
performance is abyssal: (tested with hdparm -t)

/dev/mapper/swap_crypt:
 Timing buffered disk reads:  14 MB in  3.68 seconds =   3.81 MB/sec

The patch increases both PPC4XX_NUM_SD and PPC4XX_NUM_PD to 256.
This improves the performance considerably:

/dev/mapper/swap_crypt:
 Timing buffered disk reads: 104 MB in  3.03 seconds =  34.31 MB/sec

Furthermore, PPC4XX_LAST_SD, PPC4XX_LAST_GD and PPC4XX_LAST_PD
can be easily calculated from their respective PPC4XX_NUM_*
constant.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/crypto/amcc/crypto4xx_core.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/crypto/amcc/crypto4xx_core.h b/drivers/crypto/amcc/crypto4xx_core.h
index bac0bdeb4b5f..b6529b9fcbe2 100644
--- a/drivers/crypto/amcc/crypto4xx_core.h
+++ b/drivers/crypto/amcc/crypto4xx_core.h
@@ -32,12 +32,12 @@
 #define PPC405EX_CE_RESET                       0x00000008
 
 #define CRYPTO4XX_CRYPTO_PRIORITY		300
-#define PPC4XX_LAST_PD				63
-#define PPC4XX_NUM_PD				64
-#define PPC4XX_LAST_GD				1023
+#define PPC4XX_NUM_PD				256
+#define PPC4XX_LAST_PD				(PPC4XX_NUM_PD - 1)
 #define PPC4XX_NUM_GD				1024
-#define PPC4XX_LAST_SD				63
-#define PPC4XX_NUM_SD				64
+#define PPC4XX_LAST_GD				(PPC4XX_NUM_GD - 1)
+#define PPC4XX_NUM_SD				256
+#define PPC4XX_LAST_SD				(PPC4XX_NUM_SD - 1)
 #define PPC4XX_SD_BUFFER_SIZE			2048
 
 #define PD_ENTRY_INUSE				1
-- 
2.11.0

[PATCH AUTOSEL for 4.4 43/59] rtc: pl031: make interrupt optional

[alexander.levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 5b64a2965dfdfca8039e93303c64e2b15c19ff0c ]

On some platforms, the interrupt for the PL031 is optional.  Avoid
trying to claim the interrupt if it's not specified.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/rtc/rtc-pl031.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index e1687e19c59f..a30f24cb6c83 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -308,7 +308,8 @@ static int pl031_remove(struct amba_device *adev)
 
 	dev_pm_clear_wake_irq(&adev->dev);
 	device_init_wakeup(&adev->dev, false);
-	free_irq(adev->irq[0], ldata);
+	if (adev->irq[0])
+		free_irq(adev->irq[0], ldata);
 	rtc_device_unregister(ldata->rtc);
 	iounmap(ldata->base);
 	kfree(ldata);
@@ -381,12 +382,13 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id)
 		goto out_no_rtc;
 	}
 
-	if (request_irq(adev->irq[0], pl031_interrupt,
-			vendor->irqflags, "rtc-pl031", ldata)) {
-		ret = -EIO;
-		goto out_no_irq;
+	if (adev->irq[0]) {
+		ret = request_irq(adev->irq[0], pl031_interrupt,
+				  vendor->irqflags, "rtc-pl031", ldata);
+		if (ret)
+			goto out_no_irq;
+		dev_pm_set_wake_irq(&adev->dev, adev->irq[0]);
 	}
-	dev_pm_set_wake_irq(&adev->dev, adev->irq[0]);
 	return 0;
 
 out_no_irq:
-- 
2.11.0

[PATCH AUTOSEL for 4.4 40/59] bnxt_en: Fix NULL pointer dereference in reopen failure path

[alexander.levin]

From: Sankar Patchineelam <sankar.patchineelam@broadcom.com>

[ Upstream commit 2247925f0942dc4e7c09b1cde45ca18461d94c5f ]

Net device reset can fail when the h/w or f/w is in a bad state.
Subsequent netdevice open fails in bnxt_hwrm_stat_ctx_alloc().
The cleanup invokes bnxt_hwrm_resource_free() which inturn
calls bnxt_disable_int().  In this routine, the code segment

if (ring->fw_ring_id != INVALID_HW_RING_ID)
   BNXT_CP_DB(cpr->cp_doorbell, cpr->cp_raw_cons);

results in NULL pointer dereference as cpr->cp_doorbell is not yet
initialized, and fw_ring_id is zero.

The fix is to initialize cpr fw_ring_id to INVALID_HW_RING_ID before
bnxt_init_chip() is invoked.

Signed-off-by: Sankar Patchineelam <sankar.patchineelam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 4744919440e0..a38a9cb3d544 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -2014,6 +2014,18 @@ static int bnxt_init_one_rx_ring(struct bnxt *bp, int ring_nr)
 	return 0;
 }
 
+static void bnxt_init_cp_rings(struct bnxt *bp)
+{
+	int i;
+
+	for (i = 0; i < bp->cp_nr_rings; i++) {
+		struct bnxt_cp_ring_info *cpr = &bp->bnapi[i]->cp_ring;
+		struct bnxt_ring_struct *ring = &cpr->cp_ring_struct;
+
+		ring->fw_ring_id = INVALID_HW_RING_ID;
+	}
+}
+
 static int bnxt_init_rx_rings(struct bnxt *bp)
 {
 	int i, rc = 0;
@@ -3977,6 +3989,7 @@ static int bnxt_shutdown_nic(struct bnxt *bp, bool irq_re_init)
 
 static int bnxt_init_nic(struct bnxt *bp, bool irq_re_init)
 {
+	bnxt_init_cp_rings(bp);
 	bnxt_init_rx_rings(bp);
 	bnxt_init_tx_rings(bp);
 	bnxt_init_ring_grps(bp, irq_re_init);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 46/59] scsi: cxgb4i: fix Tx skb leak

[alexander.levin]

From: Varun Prakash <varun@chelsio.com>

[ Upstream commit 9b3a081fb62158b50bcc90522ca2423017544367 ]

In case of connection reset Tx skb queue can have some skbs which are
not transmitted so purge Tx skb queue in release_offload_resources() to
avoid skb leak.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
index 804806e1cbb4..7a48905b8195 100644
--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -1339,6 +1339,7 @@ static void release_offload_resources(struct cxgbi_sock *csk)
 		csk, csk->state, csk->flags, csk->tid);
 
 	cxgbi_sock_free_cpl_skbs(csk);
+	cxgbi_sock_purge_write_queue(csk);
 	if (csk->wr_cred != csk->wr_max_cred) {
 		cxgbi_sock_purge_wr_queue(csk);
 		cxgbi_sock_reset_wr_list(csk);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 45/59] PCI: Avoid bus reset if bridge itself is broken

[alexander.levin]

From: David Daney <david.daney@cavium.com>

[ Upstream commit 357027786f3523d26f42391aa4c075b8495e5d28 ]

When checking to see if a PCI bus can safely be reset, we previously
checked to see if any of the children had their PCI_DEV_FLAGS_NO_BUS_RESET
flag set.  Children marked with that flag are known not to behave well
after a bus reset.

Some PCIe root port bridges also do not behave well after a bus reset,
sometimes causing the devices behind the bridge to become unusable.

Add a check for PCI_DEV_FLAGS_NO_BUS_RESET being set in the bridge device
to allow these bridges to be flagged, and prevent their secondary buses
from being reset.

Signed-off-by: David Daney <david.daney@cavium.com>
[jglauber@cavium.com: fixed typo]
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/pci/pci.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1a14ca8965e6..295bf1472d02 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3850,6 +3850,10 @@ static bool pci_bus_resetable(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
 
+
+	if (bus->self && (bus->self->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET))
+		return false;
+
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if (dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET ||
 		    (dev->subordinate && !pci_bus_resetable(dev->subordinate)))
-- 
2.11.0

[PATCH AUTOSEL for 4.4 47/59] scsi: mpt3sas: Fix IO error occurs on pulling out a drive from RAID1 volume created on two SATA drive

[alexander.levin]

From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>

[ Upstream commit 2ce9a3645299ba1752873d333d73f67620f4550b ]

Whenever an I/O for a RAID volume fails with IOCStatus
MPI2_IOCSTATUS_SCSI_IOC_TERMINATED and SCSIStatus equal to
(MPI2_SCSI_STATE_TERMINATED | MPI2_SCSI_STATE_NO_SCSI_STATUS) then
return the I/O to SCSI midlayer with "DID_RESET" (i.e. retry the IO
infinite times) set in the host byte.

Previously, the driver was completing the I/O with "DID_SOFT_ERROR"
which causes the I/O to be quickly retried. However, firmware needed
more time and hence I/Os were failing.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index e333029e4b6c..e111c3d8c5d6 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -4588,6 +4588,11 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 		} else if (log_info == VIRTUAL_IO_FAILED_RETRY) {
 			scmd->result = DID_RESET << 16;
 			break;
+		} else if ((scmd->device->channel == RAID_CHANNEL) &&
+		   (scsi_state == (MPI2_SCSI_STATE_TERMINATED |
+		   MPI2_SCSI_STATE_NO_SCSI_STATUS))) {
+			scmd->result = DID_RESET << 16;
+			break;
 		}
 		scmd->result = DID_SOFT_ERROR << 16;
 		break;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 44/59] net: phy: at803x: Change error to EINVAL for invalid MAC

[alexander.levin]

From: Dan Murphy <dmurphy@ti.com>

[ Upstream commit fc7556877d1748ac00958822a0a3bba1d4bd9e0d ]

Change the return error code to EINVAL if the MAC
address is not valid in the set_wol function.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/phy/at803x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 2d020a3ec0b5..37333d38b576 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -105,7 +105,7 @@ static int at803x_set_wol(struct phy_device *phydev,
 		mac = (const u8 *) ndev->dev_addr;
 
 		if (!is_valid_ether_addr(mac))
-			return -EFAULT;
+			return -EINVAL;
 
 		for (i = 0; i < 3; i++) {
 			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
-- 
2.11.0

[PATCH AUTOSEL for 4.4 49/59] igb: check memory allocation failure

[alexander.levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 18eb86362a52f0af933cc0fd5e37027317eb2d1c ]

Check memory allocation failures and return -ENOMEM in such cases, as
already done for other memory allocations in this function.

This avoids NULL pointers dereference.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Aaron Brown <aaron.f.brown@intel.com
Acked-by: PJ Waskiewicz <peter.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index c55552c3d2f9..53803fd6350c 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3005,6 +3005,8 @@ static int igb_sw_init(struct igb_adapter *adapter)
 	/* Setup and initialize a copy of the hw vlan table array */
 	adapter->shadow_vfta = kcalloc(E1000_VLAN_FILTER_TBL_SIZE, sizeof(u32),
 				       GFP_ATOMIC);
+	if (!adapter->shadow_vfta)
+		return -ENOMEM;
 
 	/* This call may decrease the number of queues */
 	if (igb_init_interrupt_scheme(adapter, true)) {
-- 
2.11.0

[PATCH AUTOSEL for 4.4 48/59] PCI: Create SR-IOV virtfn/physfn links before attaching driver

[alexander.levin]

From: Stuart Hayes <stuart.w.hayes@gmail.com>

[ Upstream commit 27d6162944b9b34c32cd5841acd21786637ee743 ]

When creating virtual functions, create the "virtfn%u" and "physfn" links
in sysfs *before* attaching the driver instead of after.  When we attach
the driver to the new virtual network interface first, there is a race when
the driver attaches to the new sends out an "add" udev event, and the
network interface naming software (biosdevname or systemd, for example)
tries to look at these links.

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/pci/iov.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 357527712539..7680fc0349fc 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -161,7 +161,6 @@ static int virtfn_add(struct pci_dev *dev, int id, int reset)
 	pci_device_add(virtfn, virtfn->bus);
 	mutex_unlock(&iov->dev->sriov->lock);
 
-	pci_bus_add_device(virtfn);
 	sprintf(buf, "virtfn%u", id);
 	rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf);
 	if (rc)
@@ -172,6 +171,8 @@ static int virtfn_add(struct pci_dev *dev, int id, int reset)
 
 	kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE);
 
+	pci_bus_add_device(virtfn);
+
 	return 0;
 
 failed2:
-- 
2.11.0

[PATCH AUTOSEL for 4.4 50/59] ixgbe: fix use of uninitialized padding

[alexander.levin]

From: Emil Tantilov <emil.s.tantilov@intel.com>

[ Upstream commit dcfd6b839c998bc9838e2a47f44f37afbdf3099c ]

This patch is resolving Coverity hits where padding in a structure could
be used uninitialized.

- Initialize fwd_cmd.pad/2 before ixgbe_calculate_checksum()

- Initialize buffer.pad2/3 before ixgbe_hic_unlocked()

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 4 ++--
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c   | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index ce61b36b94f1..105dd00ddc1a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -3620,10 +3620,10 @@ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
 	fw_cmd.ver_build = build;
 	fw_cmd.ver_sub = sub;
 	fw_cmd.hdr.checksum = 0;
-	fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
-				(FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
 	fw_cmd.pad = 0;
 	fw_cmd.pad2 = 0;
+	fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
+				(FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
 
 	for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
 		ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 31f864fb30c1..a75f2e3ce86f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -564,6 +564,8 @@ static s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
 		/* convert offset from words to bytes */
 		buffer.address = cpu_to_be32((offset + current_word) * 2);
 		buffer.length = cpu_to_be16(words_to_read * 2);
+		buffer.pad2 = 0;
+		buffer.pad3 = 0;
 
 		status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
 						      sizeof(buffer),
-- 
2.11.0

[PATCH AUTOSEL for 4.4 51/59] PCI/AER: Report non-fatal errors only to the affected endpoint

[alexander.levin]

From: Gabriele Paoloni <gabriele.paoloni@huawei.com>

[ Upstream commit 86acc790717fb60fb51ea3095084e331d8711c74 ]

Previously, if an non-fatal error was reported by an endpoint, we
called report_error_detected() for the endpoint, every sibling on the
bus, and their descendents.  If any of them did not implement the
.error_detected() method, do_recovery() failed, leaving all these
devices unrecovered.

For example, the system described in the bugzilla below has two devices:

  0000:74:02.0 [19e5:a230] SAS controller, driver has .error_detected()
  0000:74:03.0 [19e5:a235] SATA controller, driver lacks .error_detected()

When a device such as 74:02.0 reported a non-fatal error, do_recovery()
failed because 74:03.0 lacked an .error_detected() method.  But per PCIe
r3.1, sec 6.2.2.2.2, such an error does not compromise the Link and
does not affect 74:03.0:

  Non-fatal errors are uncorrectable errors which cause a particular
  transaction to be unreliable but the Link is otherwise fully functional.
  Isolating Non-fatal from Fatal errors provides Requester/Receiver logic
  in a device or system management software the opportunity to recover from
  the error without resetting the components on the Link and disturbing
  other transactions in progress.  Devices not associated with the
  transaction in error are not impacted by the error.

Report non-fatal errors only to the endpoint that reported them.  We really
want to check for AER_NONFATAL here, but the current code structure doesn't
allow that.  Looking for pci_channel_io_normal is the best we can do now.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=197055
Fixes: 6c2b374d7485 ("PCI-Express AER implemetation: AER core and aerdriver")
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/pci/pcie/aer/aerdrv_core.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 4e14de0f0f98..ca5dbf03e388 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -388,7 +388,14 @@ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
 		 * If the error is reported by an end point, we think this
 		 * error is related to the upstream link of the end point.
 		 */
-		pci_walk_bus(dev->bus, cb, &result_data);
+		if (state == pci_channel_io_normal)
+			/*
+			 * the error is non fatal so the bus is ok, just invoke
+			 * the callback for the function that logged the error.
+			 */
+			cb(dev, &result_data);
+		else
+			pci_walk_bus(dev->bus, cb, &result_data);
 	}
 
 	return result_data.result;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 52/59] percpu: don't forget to free the temporary struct pcpu_alloc_info

[alexander.levin]

From: Nicolas Pitre <nicolas.pitre@linaro.org>

[ Upstream commit 438a50618095061920d3a30d4c5ca1ef2e0ff860 ]

Unlike the SMP case, the !SMP case does not free the memory for struct
pcpu_alloc_info allocated in setup_per_cpu_areas(). And to give it a
chance of being reused by the page allocator later, align it to a page
boundary just like its size.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Dennis Zhou <dennisszhou@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 mm/percpu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/mm/percpu.c b/mm/percpu.c
index ef6353f0adbd..c69a3ff1597e 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1402,7 +1402,7 @@ struct pcpu_alloc_info * __init pcpu_alloc_alloc_info(int nr_groups,
 			  __alignof__(ai->groups[0].cpu_map[0]));
 	ai_size = base_size + nr_units * sizeof(ai->groups[0].cpu_map[0]);
 
-	ptr = memblock_virt_alloc_nopanic(PFN_ALIGN(ai_size), 0);
+	ptr = memblock_virt_alloc_nopanic(PFN_ALIGN(ai_size), PAGE_SIZE);
 	if (!ptr)
 		return NULL;
 	ai = ptr;
@@ -2265,6 +2265,7 @@ void __init setup_per_cpu_areas(void)
 
 	if (pcpu_setup_first_chunk(ai, fc) < 0)
 		panic("Failed to initialize percpu areas.");
+	pcpu_free_alloc_info(ai);
 }
 
 #endif	/* CONFIG_SMP */
-- 
2.11.0

[PATCH AUTOSEL for 4.4 53/59] powerpc/xmon: Avoid tripping SMP hardlockup watchdog

[alexander.levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 064996d62a33ffe10264b5af5dca92d54f60f806 ]

The SMP hardlockup watchdog cross-checks other CPUs for lockups, which
causes xmon headaches because it's assuming interrupts hard disabled
means no watchdog troubles. Try to improve that by calling
touch_nmi_watchdog() in obvious places where secondaries are spinning.

Also annotate these spin loops with spin_begin/end calls.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/powerpc/xmon/xmon.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 786bf01691c9..d067262be7e1 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -474,14 +474,19 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 
  waiting:
 	secondary = 1;
+	spin_begin();
 	while (secondary && !xmon_gate) {
 		if (in_xmon == 0) {
-			if (fromipi)
+			if (fromipi) {
+				spin_end();
 				goto leave;
+			}
 			secondary = test_and_set_bit(0, &in_xmon);
 		}
-		barrier();
+		spin_cpu_relax();
+		touch_nmi_watchdog();
 	}
+	spin_end();
 
 	if (!secondary && !xmon_gate) {
 		/* we are the first cpu to come in */
@@ -508,21 +513,25 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 		mb();
 		xmon_gate = 1;
 		barrier();
+		touch_nmi_watchdog();
 	}
 
  cmdloop:
 	while (in_xmon) {
 		if (secondary) {
+			spin_begin();
 			if (cpu == xmon_owner) {
 				if (!test_and_set_bit(0, &xmon_taken)) {
 					secondary = 0;
+					spin_end();
 					continue;
 				}
 				/* missed it */
 				while (cpu == xmon_owner)
-					barrier();
+					spin_cpu_relax();
 			}
-			barrier();
+			spin_cpu_relax();
+			touch_nmi_watchdog();
 		} else {
 			cmd = cmds(regs);
 			if (cmd != 0) {
-- 
2.11.0

[PATCH AUTOSEL for 4.4 54/59] scsi: lpfc: Fix secure firmware updates

[alexander.levin]

From: Dick Kennedy <dick.kennedy@broadcom.com>

[ Upstream commit 184fc2b9a8bcbda9c14d0a1e7fbecfc028c7702e ]

Firmware update fails with: status x17 add_status x56 on the final write

If multiple DMA buffers are used for the download, some firmware revs
have difficulty with signatures and crcs split across the dma buffer
boundaries.  Resolve by making all writes be a single 4k page in length.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/lpfc/lpfc_hw4.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index f224cdb2fce4..507869bc0673 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -3180,7 +3180,7 @@ struct lpfc_mbx_get_port_name {
 #define MB_CEQ_STATUS_QUEUE_FLUSHING		0x4
 #define MB_CQE_STATUS_DMA_FAILED		0x5
 
-#define LPFC_MBX_WR_CONFIG_MAX_BDE		8
+#define LPFC_MBX_WR_CONFIG_MAX_BDE		1
 struct lpfc_mbx_wr_object {
 	struct mbox_header header;
 	union {
-- 
2.11.0

[PATCH AUTOSEL for 4.4 55/59] scsi: lpfc: PLOGI failures during NPIV testing

[alexander.levin]

From: Dick Kennedy <dick.kennedy@broadcom.com>

[ Upstream commit e8bcf0ae4c0346fdc78ebefe0eefcaa6a6622d38 ]

Local Reject/Invalid RPI errors seen during discovery.

Temporary RPI cleanup was occurring regardless of SLI rev. It's only
necessary on SLI-4.

Adjust the test for whether cleanup is necessary.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/lpfc/lpfc_hbadisc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index d3668aa555d5..be901f6db6d3 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -4777,7 +4777,8 @@ lpfc_nlp_remove(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	lpfc_cancel_retry_delay_tmo(vport, ndlp);
 	if ((ndlp->nlp_flag & NLP_DEFER_RM) &&
 	    !(ndlp->nlp_flag & NLP_REG_LOGIN_SEND) &&
-	    !(ndlp->nlp_flag & NLP_RPI_REGISTERED)) {
+	    !(ndlp->nlp_flag & NLP_RPI_REGISTERED) &&
+	    phba->sli_rev != LPFC_SLI_REV4) {
 		/* For this case we need to cleanup the default rpi
 		 * allocated by the firmware.
 		 */
-- 
2.11.0

[PATCH AUTOSEL for 4.4 56/59] fm10k: ensure we process SM mbx when processing VF mbx

[alexander.levin]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 17a91809942ca32c70026d2d5ba3348a2c4fdf8f ]

When we process VF mailboxes, the driver is likely going to also queue
up messages to the switch manager. This process merely queues up the
FIFO, but doesn't actually begin the transmission process. Because we
hold the mailbox lock during this VF processing, the PF<->SM mailbox is
not getting processed at this time. Ensure that we actually process the
PF<->SM mailbox in between each PF<->VF mailbox.

This should ensure prompt transmission of the messages queued up after
each VF message is received and handled.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/intel/fm10k/fm10k_iov.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
index acfb8b1f88a7..a8f9d0012d82 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
@@ -126,6 +126,9 @@ s32 fm10k_iov_mbx(struct fm10k_intfc *interface)
 		struct fm10k_mbx_info *mbx = &vf_info->mbx;
 		u16 glort = vf_info->glort;
 
+		/* process the SM mailbox first to drain outgoing messages */
+		hw->mbx.ops.process(hw, &hw->mbx);
+
 		/* verify port mapping is valid, if not reset port */
 		if (vf_info->vf_flags && !fm10k_glort_valid_pf(hw, glort))
 			hw->iov.ops.reset_lport(hw, vf_info);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 57/59] tcp: fix under-evaluated ssthresh in TCP Vegas

[alexander.levin]

From: Hoang Tran <tranviethoang.vn@gmail.com>

[ Upstream commit cf5d74b85ef40c202c76d90959db4d850f301b95 ]

With the commit 76174004a0f19785 (tcp: do not slow start when cwnd equals
ssthresh), the comparison to the reduced cwnd in tcp_vegas_ssthresh() would
under-evaluate the ssthresh.

Signed-off-by: Hoang Tran <hoang.tran@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/ipv4/tcp_vegas.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c
index 13951c4087d4..b9fac0522be6 100644
--- a/net/ipv4/tcp_vegas.c
+++ b/net/ipv4/tcp_vegas.c
@@ -158,7 +158,7 @@ EXPORT_SYMBOL_GPL(tcp_vegas_cwnd_event);
 
 static inline u32 tcp_vegas_ssthresh(struct tcp_sock *tp)
 {
-	return  min(tp->snd_ssthresh, tp->snd_cwnd-1);
+	return  min(tp->snd_ssthresh, tp->snd_cwnd);
 }
 
 static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 acked)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 59/59] cpuidle: fix broadcast control when broadcast can not be entered

[alexander.levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit f187851b9b4a76952b1158b86434563dd2031103 ]

When failing to enter broadcast timer mode for an idle state that
requires it, a new state is selected that does not require broadcast,
but the broadcast variable remains set. This causes
tick_broadcast_exit to be called despite not having entered broadcast
mode.

This causes the WARN_ON_ONCE(!irqs_disabled()) to trigger in some
cases. It does not appear to cause problems for code today, but seems
to violate the interface so should be fixed.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/cpuidle/cpuidle.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index d40b2c077746..f1dd0f73820d 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -189,6 +189,7 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv,
 			return -EBUSY;
 		}
 		target_state = &drv->states[index];
+		broadcast = false;
 	}
 
 	/* Take note of the planned idle state. */
-- 
2.11.0

[PATCH AUTOSEL for 4.4 58/59] rtc: set the alarm to the next expiring timer

[alexander.levin]

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>

[ Upstream commit 74717b28cb32e1ad3c1042cafd76b264c8c0f68d ]

If there is any non expired timer in the queue, the RTC alarm is never set.
This is an issue when adding a timer that expires before the next non
expired timer.

Ensure the RTC alarm is set in that case.

Fixes: 2b2f5ff00f63 ("rtc: interface: ignore expired timers when enqueuing new timers")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/rtc/interface.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 9bb934ed2a7a..dcfd3655ef0a 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -764,7 +764,7 @@ static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer)
 	}
 
 	timerqueue_add(&rtc->timerqueue, &timer->node);
-	if (!next) {
+	if (!next || ktime_before(timer->node.expires, next->expires)) {
 		struct rtc_wkalrm alarm;
 		int err;
 		alarm.time = rtc_ktime_to_tm(timer->node.expires);
-- 
2.11.0