From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Sasha Levin <sashal@kernel.org>,
linux-input@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 23/44] Input: cap11xx - switch to using set_brightness_blocking()
Date: Mon, 11 Mar 2019 15:56:39 -0400 [thread overview]
Message-ID: <20190311195700.138462-23-sashal@kernel.org> (raw)
In-Reply-To: <20190311195700.138462-1-sashal@kernel.org>
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ Upstream commit 628442880af8c201d307a45f3862a7a17df8a189 ]
Updating LED state requires access to regmap and therefore we may sleep,
so we could not do that directly form set_brightness() method.
Historically we used private work to adjust the brightness, but with the
introduction of set_brightness_blocking() we no longer need it.
As a bonus, not having our own work item means we do not have
use-after-free issue as we neglected to cancel outstanding work on
driver unbind.
Reported-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/input/keyboard/cap11xx.c | 35 ++++++++++----------------------
1 file changed, 11 insertions(+), 24 deletions(-)
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index 312916f99597..73686c2460ce 100644
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -75,9 +75,7 @@
struct cap11xx_led {
struct cap11xx_priv *priv;
struct led_classdev cdev;
- struct work_struct work;
u32 reg;
- enum led_brightness new_brightness;
};
#endif
@@ -233,30 +231,21 @@ static void cap11xx_input_close(struct input_dev *idev)
}
#ifdef CONFIG_LEDS_CLASS
-static void cap11xx_led_work(struct work_struct *work)
+static int cap11xx_led_set(struct led_classdev *cdev,
+ enum led_brightness value)
{
- struct cap11xx_led *led = container_of(work, struct cap11xx_led, work);
+ struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
struct cap11xx_priv *priv = led->priv;
- int value = led->new_brightness;
/*
- * All LEDs share the same duty cycle as this is a HW limitation.
- * Brightness levels per LED are either 0 (OFF) and 1 (ON).
+ * All LEDs share the same duty cycle as this is a HW
+ * limitation. Brightness levels per LED are either
+ * 0 (OFF) and 1 (ON).
*/
- regmap_update_bits(priv->regmap, CAP11XX_REG_LED_OUTPUT_CONTROL,
- BIT(led->reg), value ? BIT(led->reg) : 0);
-}
-
-static void cap11xx_led_set(struct led_classdev *cdev,
- enum led_brightness value)
-{
- struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
-
- if (led->new_brightness == value)
- return;
-
- led->new_brightness = value;
- schedule_work(&led->work);
+ return regmap_update_bits(priv->regmap,
+ CAP11XX_REG_LED_OUTPUT_CONTROL,
+ BIT(led->reg),
+ value ? BIT(led->reg) : 0);
}
static int cap11xx_init_leds(struct device *dev,
@@ -299,7 +288,7 @@ static int cap11xx_init_leds(struct device *dev,
led->cdev.default_trigger =
of_get_property(child, "linux,default-trigger", NULL);
led->cdev.flags = 0;
- led->cdev.brightness_set = cap11xx_led_set;
+ led->cdev.brightness_set_blocking = cap11xx_led_set;
led->cdev.max_brightness = 1;
led->cdev.brightness = LED_OFF;
@@ -312,8 +301,6 @@ static int cap11xx_init_leds(struct device *dev,
led->reg = reg;
led->priv = priv;
- INIT_WORK(&led->work, cap11xx_led_work);
-
error = devm_led_classdev_register(dev, &led->cdev);
if (error) {
of_node_put(child);
--
2.19.1
next prev parent reply other threads:[~2019-03-11 19:57 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-11 19:56 [PATCH AUTOSEL 4.19 01/44] drm/imx: ignore plane updates on disabled crtcs Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 02/44] gpu: ipu-v3: Fix i.MX51 CSI control registers offset Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 03/44] drm/imx: imx-ldb: add missing of_node_puts Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 04/44] gpu: ipu-v3: Fix CSI offsets for imx53 Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 05/44] ASoC: rt5682: Correct the setting while select ASRC clk for AD/DA filter Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 06/44] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 07/44] KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlock Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 08/44] arm64: dts: rockchip: fix graph_port warning on rk3399 bob kevin and excavator Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 09/44] s390/dasd: fix using offset into zero size array error Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 10/44] Input: pwm-vibra - prevent unbalanced regulator Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 11/44] Input: pwm-vibra - stop regulator after disabling pwm, not before Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 12/44] ARM: dts: Configure clock parent for pwm vibra Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 13/44] ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 14/44] ASoC: dapm: fix out-of-bounds accesses to DAPM lookup tables Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 15/44] ASoC: rsnd: fixup rsnd_ssi_master_clk_start() user count check Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 16/44] KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 17/44] arm/arm64: KVM: Allow a VCPU to fully reset itself Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 18/44] arm/arm64: KVM: Don't panic on failure to properly reset system registers Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 19/44] KVM: arm/arm64: vgic: Always initialize the group of private IRQs Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 20/44] KVM: arm64: Forbid kprobing of the VHE world-switch code Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 21/44] ASoC: samsung: Prevent clk_get_rate() calls in atomic context Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 22/44] ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug Sasha Levin
2019-03-11 19:56 ` Sasha Levin [this message]
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 24/44] Input: ps2-gpio - flush TX work when closing port Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 25/44] Input: matrix_keypad - use flush_delayed_work() Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 26/44] mac80211: call drv_ibss_join() on restart Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 27/44] mac80211: Fix Tx aggregation session tear down with ITXQs Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 28/44] netfilter: compat: initialize all fields in xt_init Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 29/44] blk-mq: insert rq with DONTPREP to hctx dispatch list when requeue Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 30/44] ipvs: fix dependency on nf_defrag_ipv6 Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 31/44] floppy: check_events callback should not return a negative number Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 32/44] xprtrdma: Make sure Send CQ is allocated on an existing compvec Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 33/44] NFS: Don't use page_file_mapping after removing the page Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 34/44] mm/gup: fix gup_pmd_range() for dax Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 35/44] Revert "mm: use early_pfn_to_nid in page_ext_init" Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 36/44] scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 37/44] net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend() Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 38/44] x86/CPU: Add Icelake model number Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 39/44] mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 40/44] net: hns: Fix object reference leaks in hns_dsaf_roce_reset() Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 41/44] i2c: cadence: Fix the hold bit setting Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 42/44] i2c: bcm2835: Clear current buffer pointers and counts after a transfer Sasha Levin
2019-03-11 19:56 ` [PATCH AUTOSEL 4.19 43/44] auxdisplay: ht16k33: fix potential user-after-free on module unload Sasha Levin
2019-03-11 19:57 ` [PATCH AUTOSEL 4.19 44/44] Input: st-keyscan - fix potential zalloc NULL dereference Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190311195700.138462-23-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®