* [PATCH] ASoC: cs42xx8: Add reset gpio handling
@ 2019-04-29 10:46 S.j. Wang
2019-05-08 8:12 ` Mark Brown
0 siblings, 1 reply; 3+ messages in thread
From: S.j. Wang @ 2019-04-29 10:46 UTC (permalink / raw)
To: brian.austin, Paul.Handrigan, lgirdwood, broonie, perex, tiwai,
alsa-devel
Cc: linux-kernel
Handle the reset GPIO and reset the device in
pm_runtime_resume
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/codecs/cs42xx8.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/sound/soc/codecs/cs42xx8.c b/sound/soc/codecs/cs42xx8.c
index ebb9e0cf8364..fc28e6d26c6d 100644
--- a/sound/soc/codecs/cs42xx8.c
+++ b/sound/soc/codecs/cs42xx8.c
@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <sound/pcm_params.h>
@@ -45,6 +46,7 @@ struct cs42xx8_priv {
bool slave_mode;
unsigned long sysclk;
u32 tx_channels;
+ int gpio_reset;
};
/* -127.5dB to 0dB with step of 0.5dB */
@@ -467,6 +469,17 @@ int cs42xx8_probe(struct device *dev, struct regmap *regmap)
return -EINVAL;
}
+ cs42xx8->gpio_reset = of_get_named_gpio(dev->of_node, "gpio-reset", 0);
+ if (gpio_is_valid(cs42xx8->gpio_reset)) {
+ ret = devm_gpio_request_one(dev, cs42xx8->gpio_reset,
+ GPIOF_OUT_INIT_LOW, "cs42xx8 reset");
+ if (ret) {
+ dev_err(dev, "unable to get reset gpio\n");
+ return ret;
+ }
+ gpio_set_value_cansleep(cs42xx8->gpio_reset, 1);
+ }
+
cs42xx8->clk = devm_clk_get(dev, "mclk");
if (IS_ERR(cs42xx8->clk)) {
dev_err(dev, "failed to get the clock: %ld\n",
@@ -547,6 +560,11 @@ static int cs42xx8_runtime_resume(struct device *dev)
return ret;
}
+ if (gpio_is_valid(cs42xx8->gpio_reset)) {
+ gpio_set_value_cansleep(cs42xx8->gpio_reset, 0);
+ gpio_set_value_cansleep(cs42xx8->gpio_reset, 1);
+ }
+
ret = regulator_bulk_enable(ARRAY_SIZE(cs42xx8->supplies),
cs42xx8->supplies);
if (ret) {
@@ -559,6 +577,7 @@ static int cs42xx8_runtime_resume(struct device *dev)
regcache_cache_only(cs42xx8->regmap, false);
+ regcache_mark_dirty(cs42xx8->regmap);
ret = regcache_sync(cs42xx8->regmap);
if (ret) {
dev_err(dev, "failed to sync regmap: %d\n", ret);
--
1.9.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ASoC: cs42xx8: Add reset gpio handling
2019-04-29 10:46 [PATCH] ASoC: cs42xx8: Add reset gpio handling S.j. Wang
@ 2019-05-08 8:12 ` Mark Brown
0 siblings, 0 replies; 3+ messages in thread
From: Mark Brown @ 2019-05-08 8:12 UTC (permalink / raw)
To: S.j. Wang
Cc: brian.austin, Paul.Handrigan, lgirdwood, perex, tiwai,
alsa-devel, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 750 bytes --]
On Mon, Apr 29, 2019 at 10:46:03AM +0000, S.j. Wang wrote:
> + cs42xx8->gpio_reset = of_get_named_gpio(dev->of_node, "gpio-reset", 0);
> + if (gpio_is_valid(cs42xx8->gpio_reset)) {
> + ret = devm_gpio_request_one(dev, cs42xx8->gpio_reset,
> + GPIOF_OUT_INIT_LOW, "cs42xx8 reset");
You should just be able to request the GPIO by name without going
through of_get_named_gpio() using devm_gpio_get().
> @@ -559,6 +577,7 @@ static int cs42xx8_runtime_resume(struct device *dev)
>
> regcache_cache_only(cs42xx8->regmap, false);
>
> + regcache_mark_dirty(cs42xx8->regmap);
> ret = regcache_sync(cs42xx8->regmap);
> if (ret) {
> dev_err(dev, "failed to sync regmap: %d\n", ret);
This looks like an unrelated bugfix.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ASoC: cs42xx8: Add reset gpio handling
@ 2019-05-16 5:50 S.j. Wang
0 siblings, 0 replies; 3+ messages in thread
From: S.j. Wang @ 2019-05-16 5:50 UTC (permalink / raw)
To: Mark Brown
Cc: brian.austin, Paul.Handrigan, lgirdwood, perex, tiwai,
alsa-devel, linux-kernel
Hi Mark
>
> On Mon, Apr 29, 2019 at 10:46:03AM +0000, S.j. Wang wrote:
>
> > + cs42xx8->gpio_reset = of_get_named_gpio(dev->of_node, "gpio-
> reset", 0);
> > + if (gpio_is_valid(cs42xx8->gpio_reset)) {
> > + ret = devm_gpio_request_one(dev, cs42xx8->gpio_reset,
> > + GPIOF_OUT_INIT_LOW, "cs42xx8 reset");
>
> You should just be able to request the GPIO by name without going
> through of_get_named_gpio() using devm_gpio_get().
>
Will send v2.
> > @@ -559,6 +577,7 @@ static int cs42xx8_runtime_resume(struct device
> > *dev)
> >
> > regcache_cache_only(cs42xx8->regmap, false);
> >
> > + regcache_mark_dirty(cs42xx8->regmap);
> > ret = regcache_sync(cs42xx8->regmap);
> > if (ret) {
> > dev_err(dev, "failed to sync regmap: %d\n", ret);
>
> This looks like an unrelated bugfix.
Will separate it to another patch.
Best regards
Wang shengjiu
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-05-16 5:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-29 10:46 [PATCH] ASoC: cs42xx8: Add reset gpio handling S.j. Wang
2019-05-08 8:12 ` Mark Brown
2019-05-16 5:50 S.j. Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®