[PATCH AUTOSEL 4.9 01/74] rapidio: fix a NULL pointer dereference when create_workqueue() fails

[PATCH AUTOSEL 4.9 01/74] rapidio: fix a NULL pointer dereference when create_workqueue() fails

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 23015b22e47c5409620b1726a677d69e5cd032ba ]

In case create_workqueue fails, the fix releases resources and returns
-ENOMEM to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rapidio/rio_cm.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/rapidio/rio_cm.c b/drivers/rapidio/rio_cm.c
index bad0e0ea4f305..ef989a15aefc4 100644
--- a/drivers/rapidio/rio_cm.c
+++ b/drivers/rapidio/rio_cm.c
@@ -2145,6 +2145,14 @@ static int riocm_add_mport(struct device *dev,
 	mutex_init(&cm->rx_lock);
 	riocm_rx_fill(cm, RIOCM_RX_RING_SIZE);
 	cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
+	if (!cm->rx_wq) {
+		riocm_error("failed to allocate IBMBOX_%d on %s",
+			    cmbox, mport->name);
+		rio_release_outb_mbox(mport, cmbox);
+		kfree(cm);
+		return -ENOMEM;
+	}
+
 	INIT_WORK(&cm->rx_work, rio_ibmsg_handler);
 
 	cm->tx_slot = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.9 02/74] fs/fat/file.c: issue flush after the writeback of FAT

[Sasha Levin]

From: Hou Tao <houtao1@huawei.com>

[ Upstream commit bd8309de0d60838eef6fb575b0c4c7e95841cf73 ]

fsync() needs to make sure the data & meta-data of file are persistent
after the return of fsync(), even when a power-failure occurs later.  In
the case of fat-fs, the FAT belongs to the meta-data of file, so we need
to issue a flush after the writeback of FAT instead before.

Also bail out early when any stage of fsync fails.

Link: http://lkml.kernel.org/r/20190409030158.136316-1-houtao1@huawei.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fat/file.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/fs/fat/file.c b/fs/fat/file.c
index 3d04b124bce09..392ec5641f386 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -160,12 +160,17 @@ static int fat_file_release(struct inode *inode, struct file *filp)
 int fat_file_fsync(struct file *filp, loff_t start, loff_t end, int datasync)
 {
 	struct inode *inode = filp->f_mapping->host;
-	int res, err;
+	int err;
+
+	err = __generic_file_fsync(filp, start, end, datasync);
+	if (err)
+		return err;
 
-	res = generic_file_fsync(filp, start, end, datasync);
 	err = sync_mapping_buffers(MSDOS_SB(inode->i_sb)->fat_inode->i_mapping);
+	if (err)
+		return err;
 
-	return res ? res : err;
+	return blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
 }
 
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 03/74] sysctl: return -EINVAL if val violates minmax

[Sasha Levin]

From: Christian Brauner <christian@brauner.io>

[ Upstream commit e260ad01f0aa9e96b5386d5cd7184afd949dc457 ]

Currently when userspace gives us a values that overflow e.g.  file-max
and other callers of __do_proc_doulongvec_minmax() we simply ignore the
new value and leave the current value untouched.

This can be problematic as it gives the illusion that the limit has
indeed be bumped when in fact it failed.  This commit makes sure to
return EINVAL when an overflow is detected.  Please note that this is a
userspace facing change.

Link: http://lkml.kernel.org/r/20190210203943.8227-4-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sysctl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index cf0aeaae567e8..6af1ac551ea3a 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2527,8 +2527,10 @@ static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int
 			if (neg)
 				continue;
 			val = convmul * val / convdiv;
-			if ((min && val < *min) || (max && val > *max))
-				continue;
+			if ((min && val < *min) || (max && val > *max)) {
+				err = -EINVAL;
+				break;
+			}
 			*i = val;
 		} else {
 			val = convdiv * (*i) / convmul;
-- 
2.20.1

[PATCH AUTOSEL 4.9 04/74] ipc: prevent lockup on alloc_msg and free_msg

[Sasha Levin]

From: Li Rongqing <lirongqing@baidu.com>

[ Upstream commit d6a2946a88f524a47cc9b79279667137899db807 ]

msgctl10 of ltp triggers the following lockup When CONFIG_KASAN is
enabled on large memory SMP systems, the pages initialization can take a
long time, if msgctl10 requests a huge block memory, and it will block
rcu scheduler, so release cpu actively.

After adding schedule() in free_msg, free_msg can not be called when
holding spinlock, so adding msg to a tmp list, and free it out of
spinlock

  rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
  rcu:     Tasks blocked on level-1 rcu_node (CPUs 16-31): P32505
  rcu:     Tasks blocked on level-1 rcu_node (CPUs 48-63): P34978
  rcu:     (detected by 11, t=35024 jiffies, g=44237529, q=16542267)
  msgctl10        R  running task    21608 32505   2794 0x00000082
  Call Trace:
   preempt_schedule_irq+0x4c/0xb0
   retint_kernel+0x1b/0x2d
  RIP: 0010:__is_insn_slot_addr+0xfb/0x250
  Code: 82 1d 00 48 8b 9b 90 00 00 00 4c 89 f7 49 c1 ee 03 e8 59 83 1d 00 48 b8 00 00 00 00 00 fc ff df 4c 39 eb 48 89 9d 58 ff ff ff <41> c6 04 06 f8 74 66 4c 8d 75 98 4c 89 f1 48 c1 e9 03 48 01 c8 48
  RSP: 0018:ffff88bce041f758 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
  RAX: dffffc0000000000 RBX: ffffffff8471bc50 RCX: ffffffff828a2a57
  RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff88bce041f780
  RBP: ffff88bce041f828 R08: ffffed15f3f4c5b3 R09: ffffed15f3f4c5b3
  R10: 0000000000000001 R11: ffffed15f3f4c5b2 R12: 000000318aee9b73
  R13: ffffffff8471bc50 R14: 1ffff1179c083ef0 R15: 1ffff1179c083eec
   kernel_text_address+0xc1/0x100
   __kernel_text_address+0xe/0x30
   unwind_get_return_address+0x2f/0x50
   __save_stack_trace+0x92/0x100
   create_object+0x380/0x650
   __kmalloc+0x14c/0x2b0
   load_msg+0x38/0x1a0
   do_msgsnd+0x19e/0xcf0
   do_syscall_64+0x117/0x400
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

  rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
  rcu:     Tasks blocked on level-1 rcu_node (CPUs 0-15): P32170
  rcu:     (detected by 14, t=35016 jiffies, g=44237525, q=12423063)
  msgctl10        R  running task    21608 32170  32155 0x00000082
  Call Trace:
   preempt_schedule_irq+0x4c/0xb0
   retint_kernel+0x1b/0x2d
  RIP: 0010:lock_acquire+0x4d/0x340
  Code: 48 81 ec c0 00 00 00 45 89 c6 4d 89 cf 48 8d 6c 24 20 48 89 3c 24 48 8d bb e4 0c 00 00 89 74 24 0c 48 c7 44 24 20 b3 8a b5 41 <48> c1 ed 03 48 c7 44 24 28 b4 25 18 84 48 c7 44 24 30 d0 54 7a 82
  RSP: 0018:ffff88af83417738 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
  RAX: dffffc0000000000 RBX: ffff88bd335f3080 RCX: 0000000000000002
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88bd335f3d64
  RBP: ffff88af83417758 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000001 R11: ffffed13f3f745b2 R12: 0000000000000000
  R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000
   is_bpf_text_address+0x32/0xe0
   kernel_text_address+0xec/0x100
   __kernel_text_address+0xe/0x30
   unwind_get_return_address+0x2f/0x50
   __save_stack_trace+0x92/0x100
   save_stack+0x32/0xb0
   __kasan_slab_free+0x130/0x180
   kfree+0xfa/0x2d0
   free_msg+0x24/0x50
   do_msgrcv+0x508/0xe60
   do_syscall_64+0x117/0x400
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Davidlohr said:
 "So after releasing the lock, the msg rbtree/list is empty and new
  calls will not see those in the newly populated tmp_msg list, and
  therefore they cannot access the delayed msg freeing pointers, which
  is good. Also the fact that the node_cache is now freed before the
  actual messages seems to be harmless as this is wanted for
  msg_insert() avoiding GFP_ATOMIC allocations, and after releasing the
  info->lock the thing is freed anyway so it should not change things"

Link: http://lkml.kernel.org/r/1552029161-4957-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 ipc/mqueue.c  | 10 ++++++++--
 ipc/msgutil.c |  6 ++++++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 28a142f1be36d..d5491a8807515 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -371,7 +371,8 @@ static void mqueue_evict_inode(struct inode *inode)
 	struct user_struct *user;
 	unsigned long mq_bytes, mq_treesize;
 	struct ipc_namespace *ipc_ns;
-	struct msg_msg *msg;
+	struct msg_msg *msg, *nmsg;
+	LIST_HEAD(tmp_msg);
 
 	clear_inode(inode);
 
@@ -382,10 +383,15 @@ static void mqueue_evict_inode(struct inode *inode)
 	info = MQUEUE_I(inode);
 	spin_lock(&info->lock);
 	while ((msg = msg_get(info)) != NULL)
-		free_msg(msg);
+		list_add_tail(&msg->m_list, &tmp_msg);
 	kfree(info->node_cache);
 	spin_unlock(&info->lock);
 
+	list_for_each_entry_safe(msg, nmsg, &tmp_msg, m_list) {
+		list_del(&msg->m_list);
+		free_msg(msg);
+	}
+
 	/* Total amount of bytes accounted for the mqueue */
 	mq_treesize = info->attr.mq_maxmsg * sizeof(struct msg_msg) +
 		min_t(unsigned int, info->attr.mq_maxmsg, MQ_PRIO_MAX) *
diff --git a/ipc/msgutil.c b/ipc/msgutil.c
index bf74eaa5c39f2..6d90b191c6385 100644
--- a/ipc/msgutil.c
+++ b/ipc/msgutil.c
@@ -18,6 +18,7 @@
 #include <linux/utsname.h>
 #include <linux/proc_ns.h>
 #include <linux/uaccess.h>
+#include <linux/sched.h>
 
 #include "util.h"
 
@@ -64,6 +65,9 @@ static struct msg_msg *alloc_msg(size_t len)
 	pseg = &msg->next;
 	while (len > 0) {
 		struct msg_msgseg *seg;
+
+		cond_resched();
+
 		alen = min(len, DATALEN_SEG);
 		seg = kmalloc(sizeof(*seg) + alen, GFP_KERNEL_ACCOUNT);
 		if (seg == NULL)
@@ -176,6 +180,8 @@ void free_msg(struct msg_msg *msg)
 	kfree(msg);
 	while (seg != NULL) {
 		struct msg_msgseg *tmp = seg->next;
+
+		cond_resched();
 		kfree(seg);
 		seg = tmp;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.9 05/74] ARM: prevent tracing IPI_CPU_BACKTRACE

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit be167862ae7dd85c56d385209a4890678e1b0488 ]

Patch series "compiler: allow all arches to enable
CONFIG_OPTIMIZE_INLINING", v3.

This patch (of 11):

When function tracing for IPIs is enabled, we get a warning for an
overflow of the ipi_types array with the IPI_CPU_BACKTRACE type as
triggered by raise_nmi():

  arch/arm/kernel/smp.c: In function 'raise_nmi':
  arch/arm/kernel/smp.c:489:2: error: array subscript is above array bounds [-Werror=array-bounds]
    trace_ipi_raise(target, ipi_types[ipinr]);

This is a correct warning as we actually overflow the array here.

This patch raise_nmi() to call __smp_cross_call() instead of
smp_cross_call(), to avoid calling into ftrace.  For clarification, I'm
also adding a two new code comments describing how this one is special.

The warning appears to have shown up after commit e7273ff49acf ("ARM:
8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI"), which changed the
number assignment from '15' to '8', but as far as I can tell has existed
since the IPI tracepoints were first introduced.  If we decide to
backport this patch to stable kernels, we probably need to backport
e7273ff49acf as well.

[yamada.masahiro@socionext.com: rebase on v5.1-rc1]
Link: http://lkml.kernel.org/r/20190423034959.13525-2-yamada.masahiro@socionext.com
Fixes: e7273ff49acf ("ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI")
Fixes: 365ec7b17327 ("ARM: add IPI tracepoints") # v3.17
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Borislav Petkov <bp@suse.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/hardirq.h | 1 +
 arch/arm/kernel/smp.c          | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 3d7351c844aac..2fd0a2619b0b3 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -5,6 +5,7 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
+/* number of IPIS _not_ including IPI_CPU_BACKTRACE */
 #define NR_IPI	7
 
 typedef struct {
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 7a5dc011c5230..deea60f01d245 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -75,6 +75,10 @@ enum ipi_msg_type {
 	IPI_CPU_STOP,
 	IPI_IRQ_WORK,
 	IPI_COMPLETION,
+	/*
+	 * CPU_BACKTRACE is special and not included in NR_IPI
+	 * or tracable with trace_ipi_*
+	 */
 	IPI_CPU_BACKTRACE,
 	/*
 	 * SGI8-15 can be reserved by secure firmware, and thus may
@@ -801,7 +805,7 @@ core_initcall(register_cpufreq_notifier);
 
 static void raise_nmi(cpumask_t *mask)
 {
-	smp_cross_call(mask, IPI_CPU_BACKTRACE);
+	__smp_cross_call(mask, IPI_CPU_BACKTRACE);
 }
 
 void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self)
-- 
2.20.1

[PATCH AUTOSEL 4.9 06/74] hugetlbfs: on restore reserve error path retain subpool reservation

[Sasha Levin]

From: Mike Kravetz <mike.kravetz@oracle.com>

[ Upstream commit 0919e1b69ab459e06df45d3ba6658d281962db80 ]

When a huge page is allocated, PagePrivate() is set if the allocation
consumed a reservation.  When freeing a huge page, PagePrivate is checked.
If set, it indicates the reservation should be restored.  PagePrivate
being set at free huge page time mostly happens on error paths.

When huge page reservations are created, a check is made to determine if
the mapping is associated with an explicitly mounted filesystem.  If so,
pages are also reserved within the filesystem.  The default action when
freeing a huge page is to decrement the usage count in any associated
explicitly mounted filesystem.  However, if the reservation is to be
restored the reservation/use count within the filesystem should not be
decrementd.  Otherwise, a subsequent page allocation and free for the same
mapping location will cause the file filesystem usage to go 'negative'.

Filesystem                         Size  Used Avail Use% Mounted on
nodev                              4.0G -4.0M  4.1G    - /opt/hugepool

To fix, when freeing a huge page do not adjust filesystem usage if
PagePrivate() is set to indicate the reservation should be restored.

I did not cc stable as the problem has been around since reserves were
added to hugetlbfs and nobody has noticed.

Link: http://lkml.kernel.org/r/20190328234704.27083-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/hugetlb.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 8b682da98d95b..6d40bd1759cf2 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1247,12 +1247,23 @@ void free_huge_page(struct page *page)
 	ClearPagePrivate(page);
 
 	/*
-	 * A return code of zero implies that the subpool will be under its
-	 * minimum size if the reservation is not restored after page is free.
-	 * Therefore, force restore_reserve operation.
+	 * If PagePrivate() was set on page, page allocation consumed a
+	 * reservation.  If the page was associated with a subpool, there
+	 * would have been a page reserved in the subpool before allocation
+	 * via hugepage_subpool_get_pages().  Since we are 'restoring' the
+	 * reservtion, do not call hugepage_subpool_put_pages() as this will
+	 * remove the reserved page from the subpool.
 	 */
-	if (hugepage_subpool_put_pages(spool, 1) == 0)
-		restore_reserve = true;
+	if (!restore_reserve) {
+		/*
+		 * A return code of zero implies that the subpool will be
+		 * under its minimum size if the reservation is not restored
+		 * after page is free.  Therefore, force restore_reserve
+		 * operation.
+		 */
+		if (hugepage_subpool_put_pages(spool, 1) == 0)
+			restore_reserve = true;
+	}
 
 	spin_lock(&hugetlb_lock);
 	clear_page_huge_active(page);
-- 
2.20.1

[PATCH AUTOSEL 4.9 07/74] mem-hotplug: fix node spanned pages when we have a node with only ZONE_MOVABLE

[Sasha Levin]

From: Linxu Fang <fanglinxu@huawei.com>

[ Upstream commit 299c83dce9ea3a79bb4b5511d2cb996b6b8e5111 ]

342332e6a925 ("mm/page_alloc.c: introduce kernelcore=mirror option") and
later patches rewrote the calculation of node spanned pages.

e506b99696a2 ("mem-hotplug: fix node spanned pages when we have a movable
node"), but the current code still has problems,

When we have a node with only zone_movable and the node id is not zero,
the size of node spanned pages is double added.

That's because we have an empty normal zone, and zone_start_pfn or
zone_end_pfn is not between arch_zone_lowest_possible_pfn and
arch_zone_highest_possible_pfn, so we need to use clamp to constrain the
range just like the commit <96e907d13602> (bootmem: Reimplement
__absent_pages_in_range() using for_each_mem_pfn_range()).

e.g.
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000023fffffff]
Movable zone start for each node
  Node 0: 0x0000000100000000
  Node 1: 0x0000000140000000
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000bffdffff]
  node   0: [mem 0x0000000100000000-0x000000013fffffff]
  node   1: [mem 0x0000000140000000-0x000000023fffffff]

node 0 DMA	spanned:0xfff   present:0xf9e   absent:0x61
node 0 DMA32	spanned:0xff000 present:0xbefe0	absent:0x40020
node 0 Normal	spanned:0	present:0	absent:0
node 0 Movable	spanned:0x40000 present:0x40000 absent:0
On node 0 totalpages(node_present_pages): 1048446
node_spanned_pages:1310719
node 1 DMA	spanned:0	    present:0		absent:0
node 1 DMA32	spanned:0	    present:0		absent:0
node 1 Normal	spanned:0x100000    present:0x100000	absent:0
node 1 Movable	spanned:0x100000    present:0x100000	absent:0
On node 1 totalpages(node_present_pages): 2097152
node_spanned_pages:2097152
Memory: 6967796K/12582392K available (16388K kernel code, 3686K rwdata,
4468K rodata, 2160K init, 10444K bss, 5614596K reserved, 0K
cma-reserved)

It shows that the current memory of node 1 is double added.
After this patch, the problem is fixed.

node 0 DMA	spanned:0xfff   present:0xf9e   absent:0x61
node 0 DMA32	spanned:0xff000 present:0xbefe0	absent:0x40020
node 0 Normal	spanned:0	present:0	absent:0
node 0 Movable	spanned:0x40000 present:0x40000 absent:0
On node 0 totalpages(node_present_pages): 1048446
node_spanned_pages:1310719
node 1 DMA	spanned:0	    present:0		absent:0
node 1 DMA32	spanned:0	    present:0		absent:0
node 1 Normal	spanned:0	    present:0		absent:0
node 1 Movable	spanned:0x100000    present:0x100000	absent:0
On node 1 totalpages(node_present_pages): 1048576
node_spanned_pages:1048576
memory: 6967796K/8388088K available (16388K kernel code, 3686K rwdata,
4468K rodata, 2160K init, 10444K bss, 1420292K reserved, 0K
cma-reserved)

Link: http://lkml.kernel.org/r/1554178276-10372-1-git-send-email-fanglinxu@huawei.com
Signed-off-by: Linxu Fang <fanglinxu@huawei.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/page_alloc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 05f141e39ac15..13a642192e121 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5491,13 +5491,15 @@ static unsigned long __meminit zone_spanned_pages_in_node(int nid,
 					unsigned long *zone_end_pfn,
 					unsigned long *ignored)
 {
+	unsigned long zone_low = arch_zone_lowest_possible_pfn[zone_type];
+	unsigned long zone_high = arch_zone_highest_possible_pfn[zone_type];
 	/* When hotadd a new node from cpu_up(), the node should be empty */
 	if (!node_start_pfn && !node_end_pfn)
 		return 0;
 
 	/* Get the start and end of the zone */
-	*zone_start_pfn = arch_zone_lowest_possible_pfn[zone_type];
-	*zone_end_pfn = arch_zone_highest_possible_pfn[zone_type];
+	*zone_start_pfn = clamp(node_start_pfn, zone_low, zone_high);
+	*zone_end_pfn = clamp(node_end_pfn, zone_low, zone_high);
 	adjust_zone_range_for_zone_movable(nid, zone_type,
 				node_start_pfn, node_end_pfn,
 				zone_start_pfn, zone_end_pfn);
-- 
2.20.1

[PATCH AUTOSEL 4.9 08/74] mm/cma.c: fix crash on CMA allocation if bitmap allocation fails

[Sasha Levin]

From: Yue Hu <huyue2@yulong.com>

[ Upstream commit 1df3a339074e31db95c4790ea9236874b13ccd87 ]

f022d8cb7ec7 ("mm: cma: Don't crash on allocation if CMA area can't be
activated") fixes the crash issue when activation fails via setting
cma->count as 0, same logic exists if bitmap allocation fails.

Link: http://lkml.kernel.org/r/20190325081309.6004-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/cma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/mm/cma.c b/mm/cma.c
index b5d8847497a3e..4ea0f32761c1a 100644
--- a/mm/cma.c
+++ b/mm/cma.c
@@ -100,8 +100,10 @@ static int __init cma_activate_area(struct cma *cma)
 
 	cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
 
-	if (!cma->bitmap)
+	if (!cma->bitmap) {
+		cma->count = 0;
 		return -ENOMEM;
+	}
 
 	WARN_ON_ONCE(!pfn_valid(pfn));
 	zone = page_zone(pfn_to_page(pfn));
-- 
2.20.1

[PATCH AUTOSEL 4.9 09/74] mm/cma_debug.c: fix the break condition in cma_maxchunk_get()

[Sasha Levin]

From: Yue Hu <huyue2@yulong.com>

[ Upstream commit f0fd50504a54f5548eb666dc16ddf8394e44e4b7 ]

If not find zero bit in find_next_zero_bit(), it will return the size
parameter passed in, so the start bit should be compared with bitmap_maxno
rather than cma->count.  Although getting maxchunk is working fine due to
zero value of order_per_bit currently, the operation will be stuck if
order_per_bit is set as non-zero.

Link: http://lkml.kernel.org/r/20190319092734.276-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Safonov <d.safonov@partner.samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/cma_debug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/cma_debug.c b/mm/cma_debug.c
index f8e4b60db1672..da50dab56b700 100644
--- a/mm/cma_debug.c
+++ b/mm/cma_debug.c
@@ -57,7 +57,7 @@ static int cma_maxchunk_get(void *data, u64 *val)
 	mutex_lock(&cma->lock);
 	for (;;) {
 		start = find_next_zero_bit(cma->bitmap, bitmap_maxno, end);
-		if (start >= cma->count)
+		if (start >= bitmap_maxno)
 			break;
 		end = find_next_bit(cma->bitmap, bitmap_maxno, start);
 		maxchunk = max(end - start, maxchunk);
-- 
2.20.1

[PATCH AUTOSEL 4.9 10/74] mm/slab.c: fix an infinite loop in leaks_show()

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 745e10146c31b1c6ed3326286704ae251b17f663 ]

"cat /proc/slab_allocators" could hang forever on SMP machines with
kmemleak or object debugging enabled due to other CPUs running do_drain()
will keep making kmemleak_object or debug_objects_cache dirty and unable
to escape the first loop in leaks_show(),

do {
	set_store_user_clean(cachep);
	drain_cpu_caches(cachep);
	...

} while (!is_store_user_clean(cachep));

For example,

do_drain
  slabs_destroy
    slab_destroy
      kmem_cache_free
        __cache_free
          ___cache_free
            kmemleak_free_recursive
              delete_object_full
                __delete_object
                  put_object
                    free_object_rcu
                      kmem_cache_free
                        cache_free_debugcheck --> dirty kmemleak_object

One approach is to check cachep->name and skip both kmemleak_object and
debug_objects_cache in leaks_show().  The other is to set store_user_clean
after drain_cpu_caches() which leaves a small window between
drain_cpu_caches() and set_store_user_clean() where per-CPU caches could
be dirty again lead to slightly wrong information has been stored but
could also speed up things significantly which sounds like a good
compromise.  For example,

 # cat /proc/slab_allocators
 0m42.778s # 1st approach
 0m0.737s  # 2nd approach

[akpm@linux-foundation.org: tweak comment]
Link: http://lkml.kernel.org/r/20190411032635.10325-1-cai@lca.pw
Fixes: d31676dfde25 ("mm/slab: alternative implementation for DEBUG_SLAB_LEAK")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/slab.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/mm/slab.c b/mm/slab.c
index d2c0499c6b15d..9547f02b4af96 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -4365,8 +4365,12 @@ static int leaks_show(struct seq_file *m, void *p)
 	 * whole processing.
 	 */
 	do {
-		set_store_user_clean(cachep);
 		drain_cpu_caches(cachep);
+		/*
+		 * drain_cpu_caches() could make kmemleak_object and
+		 * debug_objects_cache dirty, so reset afterwards.
+		 */
+		set_store_user_clean(cachep);
 
 		x[1] = 0;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 11/74] kernel/sys.c: prctl: fix false positive in validate_prctl_map()

[Sasha Levin]

From: Cyrill Gorcunov <gorcunov@gmail.com>

[ Upstream commit a9e73998f9d705c94a8dca9687633adc0f24a19a ]

While validating new map we require the @start_data to be strictly less
than @end_data, which is fine for regular applications (this is why this
nit didn't trigger for that long).  These members are set from executable
loaders such as elf handers, still it is pretty valid to have a loadable
data section with zero size in file, in such case the start_data is equal
to end_data once kernel loader finishes.

As a result when we're trying to restore such programs the procedure fails
and the kernel returns -EINVAL.  From the image dump of a program:

 | "mm_start_code": "0x400000",
 | "mm_end_code": "0x8f5fb4",
 | "mm_start_data": "0xf1bfb0",
 | "mm_end_data": "0xf1bfb0",

Thus we need to change validate_prctl_map from strictly less to less or
equal operator use.

Link: http://lkml.kernel.org/r/20190408143554.GY1421@uranus.lan
Fixes: f606b77f1a9e3 ("prctl: PR_SET_MM -- introduce PR_SET_MM_MAP operation")
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Andrey Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sys.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sys.c b/kernel/sys.c
index 6c4e9b5332584..157277cbf83aa 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1762,7 +1762,7 @@ static int validate_prctl_map(struct prctl_mm_map *prctl_map)
 	((unsigned long)prctl_map->__m1 __op				\
 	 (unsigned long)prctl_map->__m2) ? 0 : -EINVAL
 	error  = __prctl_check_order(start_code, <, end_code);
-	error |= __prctl_check_order(start_data, <, end_data);
+	error |= __prctl_check_order(start_data,<=, end_data);
 	error |= __prctl_check_order(start_brk, <=, brk);
 	error |= __prctl_check_order(arg_start, <=, arg_end);
 	error |= __prctl_check_order(env_start, <=, env_end);
-- 
2.20.1

[PATCH AUTOSEL 4.9 12/74] drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER

[Sasha Levin]

From: Amit Kucheria <amit.kucheria@linaro.org>

[ Upstream commit fc7d18cf6a923cde7f5e7ba2c1105bb106d3e29a ]

We print a calibration failure message on -EPROBE_DEFER from
nvmem/qfprom as follows:
[    3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4
[    3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed
[    3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4

This confuses people when, in fact, calibration succeeds later when
nvmem/qfprom device is available. Don't print this message on a
-EPROBE_DEFER.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/qcom/tsens.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 3f9fe6aa51ccc..ebbe1ec7b9e83 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -162,7 +162,8 @@ static int tsens_probe(struct platform_device *pdev)
 	if (tmdev->ops->calibrate) {
 		ret = tmdev->ops->calibrate(tmdev);
 		if (ret < 0) {
-			dev_err(dev, "tsens calibration failed\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "tsens calibration failed\n");
 			return ret;
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.9 13/74] mfd: tps65912-spi: Add missing of table registration

[Sasha Levin]

From: Daniel Gomez <dagmcr@gmail.com>

[ Upstream commit 9e364e87ad7f2c636276c773d718cda29d62b741 ]

MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT
OF mathing mechanism and register it.

Before this patch:
modinfo drivers/mfd/tps65912-spi.ko | grep alias
alias:          spi:tps65912

After this patch:
modinfo drivers/mfd/tps65912-spi.ko | grep alias
alias:          of:N*T*Cti,tps65912C*
alias:          of:N*T*Cti,tps65912
alias:          spi:tps65912

Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/tps65912-spi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mfd/tps65912-spi.c b/drivers/mfd/tps65912-spi.c
index 4aeba9b6942a7..ec37cfe32ca32 100644
--- a/drivers/mfd/tps65912-spi.c
+++ b/drivers/mfd/tps65912-spi.c
@@ -27,6 +27,7 @@ static const struct of_device_id tps65912_spi_of_match_table[] = {
 	{ .compatible = "ti,tps65912", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, tps65912_spi_of_match_table);
 
 static int tps65912_spi_probe(struct spi_device *spi)
 {
-- 
2.20.1

[PATCH AUTOSEL 4.9 14/74] mfd: intel-lpss: Set the device in reset state when init

[Sasha Levin]

From: Binbin Wu <binbin.wu@intel.com>

[ Upstream commit dad06532292d77f37fbe831a02948a593500f682 ]

In virtualized setup, when system reboots due to warm
reset interrupt storm is seen.

Call Trace:
<IRQ>
dump_stack+0x70/0xa5
__report_bad_irq+0x2e/0xc0
note_interrupt+0x248/0x290
? add_interrupt_randomness+0x30/0x220
handle_irq_event_percpu+0x54/0x80
handle_irq_event+0x39/0x60
handle_fasteoi_irq+0x91/0x150
handle_irq+0x108/0x180
do_IRQ+0x52/0xf0
common_interrupt+0xf/0xf
</IRQ>
RIP: 0033:0x76fc2cfabc1d
Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e
94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18
<48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04
24
RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda
RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce
RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010
RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0
R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0
R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414
handlers:
[<000000000d3fa913>] idma64_irq
Disabling IRQ #27

To avoid interrupt storm, set the device in reset state
before bringing out the device from reset state.

Changelog v2:
- correct the subject line by adding "mfd: "

Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/intel-lpss.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c
index 19ac8bc8e7ea3..22dd8c055048c 100644
--- a/drivers/mfd/intel-lpss.c
+++ b/drivers/mfd/intel-lpss.c
@@ -273,6 +273,9 @@ static void intel_lpss_init_dev(const struct intel_lpss *lpss)
 {
 	u32 value = LPSS_PRIV_SSP_REG_DIS_DMA_FIN;
 
+	/* Set the device in reset state */
+	writel(0, lpss->priv + LPSS_PRIV_RESETS);
+
 	intel_lpss_deassert_reset(lpss);
 
 	intel_lpss_set_remap_addr(lpss);
-- 
2.20.1

[PATCH AUTOSEL 4.9 15/74] mfd: twl6040: Fix device init errors for ACCCTL register

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 48171d0ea7caccf21c9ee3ae75eb370f2a756062 ]

I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero:

twl6040 0-004b: Failed to write 2d = 19: -121

And then any following register access will produce errors.

There 2d offset above is register ACCCTL that gets written on twl6040
powerup. With error checking added to the related regcache_sync() call,
the -EREMOTEIO error is reproducable on twl6040 powerup at least
duovero.

To fix the error, we need to wait until twl6040 is accessible after the
powerup. Based on tests on omap4 duovero, we need to wait over 8ms after
powerup before register write will complete without failures. Let's also
make sure we warn about possible errors too.

Note that we have twl6040_patch[] reg_sequence with the ACCCTL register
configuration and regcache_sync() will write the new value to ACCCTL.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/twl6040.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
index dd19f17a1b637..2b8c479dbfa6e 100644
--- a/drivers/mfd/twl6040.c
+++ b/drivers/mfd/twl6040.c
@@ -322,8 +322,19 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 			}
 		}
 
+		/*
+		 * Register access can produce errors after power-up unless we
+		 * wait at least 8ms based on measurements on duovero.
+		 */
+		usleep_range(10000, 12000);
+
 		/* Sync with the HW */
-		regcache_sync(twl6040->regmap);
+		ret = regcache_sync(twl6040->regmap);
+		if (ret) {
+			dev_err(twl6040->dev, "Failed to sync with the HW: %i\n",
+				ret);
+			goto out;
+		}
 
 		/* Default PLL configuration after power up */
 		twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
-- 
2.20.1

[PATCH AUTOSEL 4.9 16/74] perf/x86/intel: Allow PEBS multi-entry in watermark mode

[Sasha Levin]

From: Stephane Eranian <eranian@google.com>

[ Upstream commit c7a286577d7592720c2f179aadfb325a1ff48c95 ]

This patch fixes a restriction/bug introduced by:

   583feb08e7f7 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS")

The original patch prevented using multi-entry PEBS when wakeup_events != 0.
However given that wakeup_events is part of a union with wakeup_watermark, it
means that in watermark mode, PEBS multi-entry is also disabled which is not the
intent. This patch fixes this by checking is watermark mode is enabled.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: vincent.weaver@maine.edu
Fixes: 583feb08e7f7 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS")
Link: http://lkml.kernel.org/r/20190514003400.224340-1-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index cb8178a2783a8..e98e238d37750 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2867,7 +2867,7 @@ static int intel_pmu_hw_config(struct perf_event *event)
 		return ret;
 
 	if (event->attr.precise_ip) {
-		if (!(event->attr.freq || event->attr.wakeup_events)) {
+		if (!(event->attr.freq || (event->attr.wakeup_events && !event->attr.watermark))) {
 			event->hw.flags |= PERF_X86_EVENT_AUTO_RELOAD;
 			if (!(event->attr.sample_type &
 			      ~intel_pmu_free_running_flags(event)))
-- 
2.20.1

[PATCH AUTOSEL 4.9 17/74] drm/bridge: adv7511: Fix low refresh rate selection

[Sasha Levin]

From: Matt Redfearn <matt.redfearn@thinci.com>

[ Upstream commit 67793bd3b3948dc8c8384b6430e036a30a0ecb43 ]

The driver currently sets register 0xfb (Low Refresh Rate) based on the
value of mode->vrefresh. Firstly, this field is specified to be in Hz,
but the magic numbers used by the code are Hz * 1000. This essentially
leads to the low refresh rate always being set to 0x01, since the
vrefresh value will always be less than 24000. Fix the magic numbers to
be in Hz.
Secondly, according to the comment in drm_modes.h, the field is not
supposed to be used in a functional way anyway. Instead, use the helper
function drm_mode_vrefresh().

Fixes: 9c8af882bf12 ("drm: Add adv7511 encoder driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424132210.26338-1-matt.redfearn@thinci.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 32ab5c32834be..1b2fae915eccb 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -735,11 +735,11 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
 			vsync_polarity = 1;
 	}
 
-	if (mode->vrefresh <= 24000)
+	if (drm_mode_vrefresh(mode) <= 24)
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
-	else if (mode->vrefresh <= 25000)
+	else if (drm_mode_vrefresh(mode) <= 25)
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
-	else if (mode->vrefresh <= 30000)
+	else if (drm_mode_vrefresh(mode) <= 30)
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
 	else
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
-- 
2.20.1

[PATCH AUTOSEL 4.9 18/74] objtool: Don't use ignore flag for fake jumps

[Sasha Levin]

From: Josh Poimboeuf <jpoimboe@redhat.com>

[ Upstream commit e6da9567959e164f82bc81967e0d5b10dee870b4 ]

The ignore flag is set on fake jumps in order to keep
add_jump_destinations() from setting their jump_dest, since it already
got set when the fake jump was created.

But using the ignore flag is a bit of a hack.  It's normally used to
skip validation of an instruction, which doesn't really make sense for
fake jumps.

Also, after the next patch, using the ignore flag for fake jumps can
trigger a false "why am I validating an ignored function?" warning.

Instead just add an explicit check in add_jump_destinations() to skip
fake jumps.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/71abc072ff48b2feccc197723a9c52859476c068.1557766718.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/check.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index ae3446768181f..95326c6a7a249 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -28,6 +28,8 @@
 #include <linux/hashtable.h>
 #include <linux/kernel.h>
 
+#define FAKE_JUMP_OFFSET -1
+
 struct alternative {
 	struct list_head list;
 	struct instruction *insn;
@@ -498,7 +500,7 @@ static int add_jump_destinations(struct objtool_file *file)
 		    insn->type != INSN_JUMP_UNCONDITIONAL)
 			continue;
 
-		if (insn->ignore)
+		if (insn->ignore || insn->offset == FAKE_JUMP_OFFSET)
 			continue;
 
 		rela = find_rela_by_dest_range(insn->sec, insn->offset,
@@ -645,10 +647,10 @@ static int handle_group_alt(struct objtool_file *file,
 		clear_insn_state(&fake_jump->state);
 
 		fake_jump->sec = special_alt->new_sec;
-		fake_jump->offset = -1;
+		fake_jump->offset = FAKE_JUMP_OFFSET;
 		fake_jump->type = INSN_JUMP_UNCONDITIONAL;
 		fake_jump->jump_dest = list_next_entry(last_orig_insn, list);
-		fake_jump->ignore = true;
+		fake_jump->func = orig_insn->func;
 	}
 
 	if (!special_alt->new_len) {
-- 
2.20.1

[PATCH AUTOSEL 4.9 19/74] NFS4: Fix v4.0 client state corruption when mount

[Sasha Levin]

From: ZhangXiaoxu <zhangxiaoxu5@huawei.com>

[ Upstream commit f02f3755dbd14fb935d24b14650fff9ba92243b8 ]

stat command with soft mount never return after server is stopped.

When alloc a new client, the state of the client will be set to
NFS4CLNT_LEASE_EXPIRED.

When the server is stopped, the state manager will work, and accord
the state to recover. But the state is NFS4CLNT_LEASE_EXPIRED, it
will drain the slot table and lead other task to wait queue, until
the client recovered. Then the stat command is hung.

When discover server trunking, the client will renew the lease,
but check the client state, it lead the client state corruption.

So, we need to call state manager to recover it when detect server
ip trunking.

Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4state.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 857af951831f4..6f474b0670323 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -143,6 +143,10 @@ int nfs40_discover_server_trunking(struct nfs_client *clp,
 		/* Sustain the lease, even if it's empty.  If the clientid4
 		 * goes stale it's of no use for trunking discovery. */
 		nfs4_schedule_state_renewal(*result);
+
+		/* If the client state need to recover, do it. */
+		if (clp->cl_state)
+			nfs4_schedule_state_manager(clp);
 	}
 out:
 	return status;
-- 
2.20.1

[PATCH AUTOSEL 4.9 20/74] pwm: meson: Use the spin-lock only to protect register modifications

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit f173747fffdf037c791405ab4f1ec0eb392fc48e ]

Holding the spin-lock for all of the code in meson_pwm_apply() can
result in a "BUG: scheduling while atomic". This can happen because
clk_get_rate() (which is called from meson_pwm_calc()) may sleep.
Only hold the spin-lock when modifying registers to solve this.

The reason why we need a spin-lock in the driver is because the
REG_MISC_AB register is shared between the two channels provided by one
PWM controller. The only functions where REG_MISC_AB is modified are
meson_pwm_enable() and meson_pwm_disable() so the register reads/writes
in there need to be protected by the spin-lock.

The original code also used the spin-lock to protect the values in
struct meson_pwm_channel. This could be necessary if two consumers can
use the same PWM channel. However, PWM core doesn't allow this so we
don't need to protect the values in struct meson_pwm_channel with a
lock.

Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-meson.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 9d5bd7d5c610b..f58a4867b5194 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -110,6 +110,10 @@ struct meson_pwm {
 	const struct meson_pwm_data *data;
 	void __iomem *base;
 	u8 inverter_mask;
+	/*
+	 * Protects register (write) access to the REG_MISC_AB register
+	 * that is shared between the two PWMs.
+	 */
 	spinlock_t lock;
 };
 
@@ -230,6 +234,7 @@ static void meson_pwm_enable(struct meson_pwm *meson,
 {
 	u32 value, clk_shift, clk_enable, enable;
 	unsigned int offset;
+	unsigned long flags;
 
 	switch (id) {
 	case 0:
@@ -250,6 +255,8 @@ static void meson_pwm_enable(struct meson_pwm *meson,
 		return;
 	}
 
+	spin_lock_irqsave(&meson->lock, flags);
+
 	value = readl(meson->base + REG_MISC_AB);
 	value &= ~(MISC_CLK_DIV_MASK << clk_shift);
 	value |= channel->pre_div << clk_shift;
@@ -262,11 +269,14 @@ static void meson_pwm_enable(struct meson_pwm *meson,
 	value = readl(meson->base + REG_MISC_AB);
 	value |= enable;
 	writel(value, meson->base + REG_MISC_AB);
+
+	spin_unlock_irqrestore(&meson->lock, flags);
 }
 
 static void meson_pwm_disable(struct meson_pwm *meson, unsigned int id)
 {
 	u32 value, enable;
+	unsigned long flags;
 
 	switch (id) {
 	case 0:
@@ -281,9 +291,13 @@ static void meson_pwm_disable(struct meson_pwm *meson, unsigned int id)
 		return;
 	}
 
+	spin_lock_irqsave(&meson->lock, flags);
+
 	value = readl(meson->base + REG_MISC_AB);
 	value &= ~enable;
 	writel(value, meson->base + REG_MISC_AB);
+
+	spin_unlock_irqrestore(&meson->lock, flags);
 }
 
 static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -291,19 +305,16 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 {
 	struct meson_pwm_channel *channel = pwm_get_chip_data(pwm);
 	struct meson_pwm *meson = to_meson_pwm(chip);
-	unsigned long flags;
 	int err = 0;
 
 	if (!state)
 		return -EINVAL;
 
-	spin_lock_irqsave(&meson->lock, flags);
-
 	if (!state->enabled) {
 		meson_pwm_disable(meson, pwm->hwpwm);
 		channel->state.enabled = false;
 
-		goto unlock;
+		return 0;
 	}
 
 	if (state->period != channel->state.period ||
@@ -324,7 +335,7 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 		err = meson_pwm_calc(meson, channel, pwm->hwpwm,
 				     state->duty_cycle, state->period);
 		if (err < 0)
-			goto unlock;
+			return err;
 
 		channel->state.polarity = state->polarity;
 		channel->state.period = state->period;
@@ -336,9 +347,7 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 		channel->state.enabled = true;
 	}
 
-unlock:
-	spin_unlock_irqrestore(&meson->lock, flags);
-	return err;
+	return 0;
 }
 
 static void meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
-- 
2.20.1

[PATCH AUTOSEL 4.9 21/74] ntp: Allow TAI-UTC offset to be set to zero

[Sasha Levin]

From: Miroslav Lichvar <mlichvar@redhat.com>

[ Upstream commit fdc6bae940ee9eb869e493990540098b8c0fd6ab ]

The ADJ_TAI adjtimex mode sets the TAI-UTC offset of the system clock.
It is typically set by NTP/PTP implementations and it is automatically
updated by the kernel on leap seconds. The initial value is zero (which
applications may interpret as unknown), but this value cannot be set by
adjtimex. This limitation seems to go back to the original "nanokernel"
implementation by David Mills.

Change the ADJ_TAI check to accept zero as a valid TAI-UTC offset in
order to allow setting it back to the initial value.

Fixes: 153b5d054ac2 ("ntp: support for TAI")
Suggested-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Link: https://lkml.kernel.org/r/20190417084833.7401-1-mlichvar@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/ntp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 6df8927c58a5b..0a16419006f3b 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -639,7 +639,7 @@ static inline void process_adjtimex_modes(struct timex *txc,
 		time_constant = max(time_constant, 0l);
 	}
 
-	if (txc->modes & ADJ_TAI && txc->constant > 0)
+	if (txc->modes & ADJ_TAI && txc->constant >= 0)
 		*time_tai = txc->constant;
 
 	if (txc->modes & ADJ_OFFSET)
-- 
2.20.1

[PATCH AUTOSEL 4.9 22/74] f2fs: fix to avoid panic in do_recover_data()

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 22d61e286e2d9097dae36f75ed48801056b77cac ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203227

- Overview
When mounting the attached crafted image, following errors are reported.
Additionally, it hangs on sync after trying to mount it.

The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y

- Reproduces
mkdir test
mount -t f2fs tmp.img test
sync

- Messages
 kernel BUG at fs/f2fs/recovery.c:549!
 RIP: 0010:recover_data+0x167a/0x1780
 Call Trace:
  f2fs_recover_fsync_data+0x613/0x710
  f2fs_fill_super+0x1043/0x1aa0
  mount_bdev+0x16d/0x1a0
  mount_fs+0x4a/0x170
  vfs_kern_mount+0x5d/0x100
  do_mount+0x200/0xcf0
  ksys_mount+0x79/0xc0
  __x64_sys_mount+0x1c/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

During recovery, if ofs_of_node is inconsistent in between recovered
node page and original checkpointed node page, let's just fail recovery
instead of making kernel panic.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/recovery.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index e59eeaf02eaa7..9de1480a86bd3 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -407,7 +407,15 @@ static int do_recover_data(struct f2fs_sb_info *sbi, struct inode *inode,
 
 	get_node_info(sbi, dn.nid, &ni);
 	f2fs_bug_on(sbi, ni.ino != ino_of_node(page));
-	f2fs_bug_on(sbi, ofs_of_node(dn.node_page) != ofs_of_node(page));
+
+	if (ofs_of_node(dn.node_page) != ofs_of_node(page)) {
+		f2fs_msg(sbi->sb, KERN_WARNING,
+			"Inconsistent ofs_of_node, ino:%lu, ofs:%u, %u",
+			inode->i_ino, ofs_of_node(dn.node_page),
+			ofs_of_node(page));
+		err = -EFAULT;
+		goto err;
+	}
 
 	for (; start < end; start++, dn.ofs_in_node++) {
 		block_t src, dest;
-- 
2.20.1

[PATCH AUTOSEL 4.9 23/74] f2fs: fix to clear dirty inode in error path of f2fs_iget()

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 546d22f070d64a7b96f57c93333772085d3a5e6d ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203217

- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the program.

The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.

- Reproduces
cc poc_test_05.c
mkdir test
mount -t f2fs tmp.img test
sudo ./a.out
sync

- Messages
 kernel BUG at fs/f2fs/inode.c:707!
 RIP: 0010:f2fs_evict_inode+0x33f/0x3a0
 Call Trace:
  evict+0xba/0x180
  f2fs_iget+0x598/0xdf0
  f2fs_lookup+0x136/0x320
  __lookup_slow+0x92/0x140
  lookup_slow+0x30/0x50
  walk_component+0x1c1/0x350
  path_lookupat+0x62/0x200
  filename_lookup+0xb3/0x1a0
  do_readlinkat+0x56/0x110
  __x64_sys_readlink+0x16/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

During inode loading, __recover_inline_status() can recovery inode status
and set inode dirty, once we failed in following process, it will fail
the check in f2fs_evict_inode, result in trigger BUG_ON().

Let's clear dirty inode in error path of f2fs_iget() to avoid panic.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
index 1de02c31756bc..c56d04ec45dcf 100644
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -288,6 +288,7 @@ struct inode *f2fs_iget(struct super_block *sb, unsigned long ino)
 	return inode;
 
 bad_inode:
+	f2fs_inode_synced(inode);
 	iget_failed(inode);
 	trace_f2fs_iget_exit(inode, ret);
 	return ERR_PTR(ret);
-- 
2.20.1

[PATCH AUTOSEL 4.9 24/74] f2fs: fix to do sanity check on valid block count of segment

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit e95bcdb2fefa129f37bd9035af1d234ca92ee4ef ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203233

- Overview
When mounting the attached crafted image and running program, following errors are reported.
Additionally, it hangs on sync after running program.

The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y

- Reproduces
cc poc_13.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
sync

- Kernel messages
 F2FS-fs (sdb): Bitmap was wrongly set, blk:4608
 kernel BUG at fs/f2fs/segment.c:2102!
 RIP: 0010:update_sit_entry+0x394/0x410
 Call Trace:
  f2fs_allocate_data_block+0x16f/0x660
  do_write_page+0x62/0x170
  f2fs_do_write_node_page+0x33/0xa0
  __write_node_page+0x270/0x4e0
  f2fs_sync_node_pages+0x5df/0x670
  f2fs_write_checkpoint+0x372/0x1400
  f2fs_sync_fs+0xa3/0x130
  f2fs_do_sync_file+0x1a6/0x810
  do_fsync+0x33/0x60
  __x64_sys_fsync+0xb/0x10
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

sit.vblocks and sum valid block count in sit.valid_map may be
inconsistent, segment w/ zero vblocks will be treated as free
segment, while allocating in free segment, we may allocate a
free block, if its bitmap is valid previously, it can cause
kernel crash due to bitmap verification failure.

Anyway, to avoid further serious metadata inconsistence and
corruption, it is necessary and worth to detect SIT
inconsistence. So let's enable check_block_count() to verify
vblocks and valid_map all the time rather than do it only
CONFIG_F2FS_CHECK_FS is enabled.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 893723978f5ed..faca7fdb54b08 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -613,7 +613,6 @@ static inline void verify_block_addr(struct f2fs_io_info *fio, block_t blk_addr)
 static inline int check_block_count(struct f2fs_sb_info *sbi,
 		int segno, struct f2fs_sit_entry *raw_sit)
 {
-#ifdef CONFIG_F2FS_CHECK_FS
 	bool is_valid  = test_bit_le(0, raw_sit->valid_map) ? true : false;
 	int valid_blocks = 0;
 	int cur_pos = 0, next_pos;
@@ -640,7 +639,7 @@ static inline int check_block_count(struct f2fs_sb_info *sbi,
 		set_sbi_flag(sbi, SBI_NEED_FSCK);
 		return -EINVAL;
 	}
-#endif
+
 	/* check segment usage, and check boundary of a given segment number */
 	if (unlikely(GET_SIT_VBLOCKS(raw_sit) > sbi->blocks_per_seg
 					|| segno > TOTAL_SEGS(sbi) - 1)) {
-- 
2.20.1

[PATCH AUTOSEL 4.9 25/74] tracing: Fix partial reading of trace event's id file

[Sasha Levin]

From: Elazar Leibovich <elazar@lightbitslabs.com>

[ Upstream commit cbe08bcbbe787315c425dde284dcb715cfbf3f39 ]

When reading only part of the id file, the ppos isn't tracked correctly.
This is taken care by simple_read_from_buffer.

Reading a single byte, and then the next byte would result EOF.

While this seems like not a big deal, this breaks abstractions that
reads information from files unbuffered. See for example
https://github.com/golang/go/issues/29399

This code was mentioned as problematic in
commit cd458ba9d5a5
("tracing: Do not (ab)use trace_seq in event_id_read()")

An example C code that show this bug is:

  #include <stdio.h>
  #include <stdint.h>

  #include <sys/types.h>
  #include <sys/stat.h>
  #include <fcntl.h>
  #include <unistd.h>

  int main(int argc, char **argv) {
    if (argc < 2)
      return 1;
    int fd = open(argv[1], O_RDONLY);
    char c;
    read(fd, &c, 1);
    printf("First  %c\n", c);
    read(fd, &c, 1);
    printf("Second %c\n", c);
  }

Then run with, e.g.

  sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id

You'll notice you're getting the first character twice, instead of the
first two characters in the id file.

Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com

Cc: Orit Wasserman <orit.was@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 23725aeeab10b ("ftrace: provide an id file for each event")
Signed-off-by: Elazar Leibovich <elazar@lightbitslabs.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_events.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 9549ed120556e..af969f753e5e9 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -1310,9 +1310,6 @@ event_id_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos)
 	char buf[32];
 	int len;
 
-	if (*ppos)
-		return 0;
-
 	if (unlikely(!id))
 		return -ENODEV;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 26/74] configfs: fix possible use-after-free in configfs_register_group

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 35399f87e271f7cf3048eab00a421a6519ac8441 ]

In configfs_register_group(), if create_default_group() failed, we
forget to unlink the group. It will left a invalid item in the parent list,
which may trigger the use-after-free issue seen below:

BUG: KASAN: use-after-free in __list_add_valid+0xd4/0xe0 lib/list_debug.c:26
Read of size 8 at addr ffff8881ef61ae20 by task syz-executor.0/5996

CPU: 1 PID: 5996 Comm: syz-executor.0 Tainted: G         C        5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xa9/0x10e lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 __list_add_valid+0xd4/0xe0 lib/list_debug.c:26
 __list_add include/linux/list.h:60 [inline]
 list_add_tail include/linux/list.h:93 [inline]
 link_obj+0xb0/0x190 fs/configfs/dir.c:759
 link_group+0x1c/0x130 fs/configfs/dir.c:784
 configfs_register_group+0x56/0x1e0 fs/configfs/dir.c:1751
 configfs_register_default_group+0x72/0xc0 fs/configfs/dir.c:1834
 ? 0xffffffffc1be0000
 iio_sw_trigger_init+0x23/0x1000 [industrialio_sw_trigger]
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f494ecbcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00007f494ecbcc70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f494ecbd6bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

Allocated by task 5987:
 set_track mm/kasan/common.c:87 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:497
 kmalloc include/linux/slab.h:545 [inline]
 kzalloc include/linux/slab.h:740 [inline]
 configfs_register_default_group+0x4c/0xc0 fs/configfs/dir.c:1829
 0xffffffffc1bd0023
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 5987:
 set_track mm/kasan/common.c:87 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:459
 slab_free_hook mm/slub.c:1429 [inline]
 slab_free_freelist_hook mm/slub.c:1456 [inline]
 slab_free mm/slub.c:3003 [inline]
 kfree+0xe1/0x270 mm/slub.c:3955
 configfs_register_default_group+0x9a/0xc0 fs/configfs/dir.c:1836
 0xffffffffc1bd0023
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881ef61ae00
 which belongs to the cache kmalloc-192 of size 192
The buggy address is located 32 bytes inside of
 192-byte region [ffff8881ef61ae00, ffff8881ef61aec0)
The buggy address belongs to the page:
page:ffffea0007bd8680 count:1 mapcount:0 mapping:ffff8881f6c03000 index:0xffff8881ef61a700
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 ffffea0007ca4740 0000000500000005 ffff8881f6c03000
raw: ffff8881ef61a700 000000008010000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881ef61ad00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8881ef61ad80: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
>ffff8881ef61ae00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                               ^
 ffff8881ef61ae80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8881ef61af00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 5cf6a51e6062 ("configfs: allow dynamic group creation")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/configfs/dir.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index d2a1a79fa324b..d7955dc56737f 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -1755,12 +1755,19 @@ int configfs_register_group(struct config_group *parent_group,
 
 	inode_lock_nested(d_inode(parent), I_MUTEX_PARENT);
 	ret = create_default_group(parent_group, group);
-	if (!ret) {
-		spin_lock(&configfs_dirent_lock);
-		configfs_dir_set_ready(group->cg_item.ci_dentry->d_fsdata);
-		spin_unlock(&configfs_dirent_lock);
-	}
+	if (ret)
+		goto err_out;
+
+	spin_lock(&configfs_dirent_lock);
+	configfs_dir_set_ready(group->cg_item.ci_dentry->d_fsdata);
+	spin_unlock(&configfs_dirent_lock);
+	inode_unlock(d_inode(parent));
+	return 0;
+err_out:
 	inode_unlock(d_inode(parent));
+	mutex_lock(&subsys->su_mutex);
+	unlink_group(group);
+	mutex_unlock(&subsys->su_mutex);
 	return ret;
 }
 EXPORT_SYMBOL(configfs_register_group);
-- 
2.20.1

[PATCH AUTOSEL 4.9 27/74] uml: fix a boot splat wrt use of cpu_all_mask

[Sasha Levin]

From: Maciej Żenczykowski <maze@google.com>

[ Upstream commit 689a58605b63173acb0a8cf954af6a8f60440c93 ]

Memory: 509108K/542612K available (3835K kernel code, 919K rwdata, 1028K rodata, 129K init, 211K bss, 33504K reserved, 0K cma-reserved)
NR_IRQS: 15
clocksource: timer: mask: 0xffffffffffffffff max_cycles: 0x1cd42e205, max_idle_ns: 881590404426 ns
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:458 clockevents_register_device+0x72/0x140
posix-timer cpumask == cpu_all_mask, using cpu_possible_mask instead
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc4-00048-ged79cc87302b #4
Stack:
 604ebda0 603c5370 604ebe20 6046fd17
 00000000 6006fcbb 604ebdb0 603c53b5
 604ebe10 6003bfc4 604ebdd0 9000001ca
Call Trace:
 [<6006fcbb>] ? printk+0x0/0x94
 [<60083160>] ? clockevents_register_device+0x72/0x140
 [<6001f16e>] show_stack+0x13b/0x155
 [<603c5370>] ? dump_stack_print_info+0xe2/0xeb
 [<6006fcbb>] ? printk+0x0/0x94
 [<603c53b5>] dump_stack+0x2a/0x2c
 [<6003bfc4>] __warn+0x10e/0x13e
 [<60070320>] ? vprintk_func+0xc8/0xcf
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<6003c08b>] warn_slowpath_fmt+0x97/0x99
 [<600311a1>] ? set_signals+0x0/0x3f
 [<6003bff4>] ? warn_slowpath_fmt+0x0/0x99
 [<600842cb>] ? tick_oneshot_mode_active+0x44/0x4f
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<6007d2d5>] ? __clocksource_select+0x20/0x1b1
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<60083160>] clockevents_register_device+0x72/0x140
 [<60031192>] ? get_signals+0x0/0xf
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<60002eec>] um_timer_setup+0xc8/0xca
 [<60001b59>] start_kernel+0x47f/0x57e
 [<600035bc>] start_kernel_proc+0x49/0x4d
 [<6006c483>] ? kmsg_dump_register+0x82/0x8a
 [<6001de62>] new_thread_handler+0x81/0xb2
 [<60003571>] ? kmsg_dumper_stdout_init+0x1a/0x1c
 [<60020c75>] uml_finishsetup+0x54/0x59

random: get_random_bytes called from init_oops_id+0x27/0x34 with crng_init=0
---[ end trace 00173d0117a88acb ]---
Calibrating delay loop... 6941.90 BogoMIPS (lpj=34709504)

Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Cc: linux-kernel@vger.kernel.org

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/kernel/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index 25c23666d5924..040e3efdc9a67 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -56,7 +56,7 @@ static int itimer_one_shot(struct clock_event_device *evt)
 static struct clock_event_device timer_clockevent = {
 	.name			= "posix-timer",
 	.rating			= 250,
-	.cpumask		= cpu_all_mask,
+	.cpumask		= cpu_possible_mask,
 	.features		= CLOCK_EVT_FEAT_PERIODIC |
 				  CLOCK_EVT_FEAT_ONESHOT,
 	.set_state_shutdown	= itimer_shutdown,
-- 
2.20.1

[PATCH AUTOSEL 4.9 28/74] mips: Make sure dt memory regions are valid

[Sasha Levin]

From: Serge Semin <fancer.lancer@gmail.com>

[ Upstream commit 93fa5b280761a4dbb14c5330f260380385ab2b49 ]

There are situations when memory regions coming from dts may be
too big for the platform physical address space. This especially
concerns XPA-capable systems. Bootloader may determine more than 4GB
memory available and pass it to the kernel over dts memory node, while
kernel is built without XPA/64BIT support. In this case the region
may either simply be truncated by add_memory_region() method
or by u64->phys_addr_t type casting. But in worst case the method
can even drop the memory region if it exceeds PHYS_ADDR_MAX size.
So lets make sure the retrieved from dts memory regions are valid,
and if some of them aren't, just manually truncate them with a warning
printed out.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Serge Semin <Sergey.Semin@t-platforms.ru>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/prom.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index 5fcec3032f38f..6131807799b49 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -41,7 +41,19 @@ char *mips_get_machine_name(void)
 #ifdef CONFIG_USE_OF
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
-	return add_memory_region(base, size, BOOT_MEM_RAM);
+	if (base >= PHYS_ADDR_MAX) {
+		pr_warn("Trying to add an invalid memory region, skipped\n");
+		return;
+	}
+
+	/* Truncate the passed memory region instead of type casting */
+	if (base + size - 1 >= PHYS_ADDR_MAX || base + size < base) {
+		pr_warn("Truncate memory region %llx @ %llx to size %llx\n",
+			size, base, PHYS_ADDR_MAX - base);
+		size = PHYS_ADDR_MAX - base;
+	}
+
+	add_memory_region(base, size, BOOT_MEM_RAM);
 }
 
 void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
-- 
2.20.1

[PATCH AUTOSEL 4.9 29/74] watchdog: Use depends instead of select for pretimeout governors

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit f627ac0e12cd2736e60b9f5782ecec1d97251f77 ]

Watchdog pretimeout governors were enabled from the default governor
selection using "select". As a result, the default governor was always
built into the kernel, even if no watchdog driver was loaded. By using
"depends on" instead of "select", we are in better control, and the
governors can all be built as modules. At the same time, set the default
configuration option for pretimeout governors to match WATCHDOG_CORE
(meaning all pretimeout governors are by default enabled if pretimeout
support is enabled).

The practical impact of this change is minimal. Previously, selecting
a default governor automatically enabled that governor. Now, a default
governor can only be selected if that governor has been enabled.
Consequently, the order of governor selection is now reversed: The
governor selection is now first, followed by default governor selection.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/Kconfig | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 8f8909a668d78..15c01830799a4 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1855,6 +1855,20 @@ config WATCHDOG_PRETIMEOUT_GOV
 
 if WATCHDOG_PRETIMEOUT_GOV
 
+config WATCHDOG_PRETIMEOUT_GOV_NOOP
+	tristate "Noop watchdog pretimeout governor"
+	default WATCHDOG_CORE
+	help
+	  Noop watchdog pretimeout governor, only an informational
+	  message is added to kernel log buffer.
+
+config WATCHDOG_PRETIMEOUT_GOV_PANIC
+	tristate "Panic watchdog pretimeout governor"
+	default WATCHDOG_CORE
+	help
+	  Panic watchdog pretimeout governor, on watchdog pretimeout
+	  event put the kernel into panic.
+
 choice
 	prompt "Default Watchdog Pretimeout Governor"
 	default WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC
@@ -1865,7 +1879,7 @@ choice
 
 config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP
 	bool "noop"
-	select WATCHDOG_PRETIMEOUT_GOV_NOOP
+	depends on WATCHDOG_PRETIMEOUT_GOV_NOOP
 	help
 	  Use noop watchdog pretimeout governor by default. If noop
 	  governor is selected by a user, write a short message to
@@ -1873,7 +1887,7 @@ config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP
 
 config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC
 	bool "panic"
-	select WATCHDOG_PRETIMEOUT_GOV_PANIC
+	depends on WATCHDOG_PRETIMEOUT_GOV_PANIC
 	help
 	  Use panic watchdog pretimeout governor by default, if
 	  a watchdog pretimeout event happens, consider that
@@ -1881,18 +1895,6 @@ config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC
 
 endchoice
 
-config WATCHDOG_PRETIMEOUT_GOV_NOOP
-	tristate "Noop watchdog pretimeout governor"
-	help
-	  Noop watchdog pretimeout governor, only an informational
-	  message is added to kernel log buffer.
-
-config WATCHDOG_PRETIMEOUT_GOV_PANIC
-	tristate "Panic watchdog pretimeout governor"
-	help
-	  Panic watchdog pretimeout governor, on watchdog pretimeout
-	  event put the kernel into panic.
-
 endif # WATCHDOG_PRETIMEOUT_GOV
 
 endif # WATCHDOG
-- 
2.20.1

[PATCH AUTOSEL 4.9 30/74] watchdog: imx2_wdt: Fix set_timeout for big timeout values

[Sasha Levin]

From: Georg Hofmann <georg@hofmannsweb.com>

[ Upstream commit b07e228eee69601addba98b47b1a3850569e5013 ]

The documentated behavior is: if max_hw_heartbeat_ms is implemented, the
minimum of the set_timeout argument and max_hw_heartbeat_ms should be used.
This patch implements this behavior.
Previously only the first 7bits were used and the input argument was
returned.

Signed-off-by: Georg Hofmann <georg@hofmannsweb.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/imx2_wdt.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 518dfa1047cbd..5098982e1a585 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -181,8 +181,10 @@ static void __imx2_wdt_set_timeout(struct watchdog_device *wdog,
 static int imx2_wdt_set_timeout(struct watchdog_device *wdog,
 				unsigned int new_timeout)
 {
-	__imx2_wdt_set_timeout(wdog, new_timeout);
+	unsigned int actual;
 
+	actual = min(new_timeout, wdog->max_hw_heartbeat_ms * 1000);
+	__imx2_wdt_set_timeout(wdog, actual);
 	wdog->timeout = new_timeout;
 	return 0;
 }
-- 
2.20.1