From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: tglx@linutronix.de
Cc: linux-kernel@vger.kernel.org, Dmitry Osipenko <digetx@gmail.com>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
linux-tegra@vger.kernel.org (open list:TEGRA ARCHITECTURE
SUPPORT)
Subject: [PATCH 08/25] clocksource/drivers/tegra: Replace readl/writel with relaxed versions
Date: Wed, 26 Jun 2019 16:46:34 +0200 [thread overview]
Message-ID: <20190626144651.16742-8-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <20190626144651.16742-1-daniel.lezcano@linaro.org>
From: Dmitry Osipenko <digetx@gmail.com>
The readl/writel functions are inserting memory barrier to ensure that
outstanding memory writes are completed, this results in L2 cache syncing
being done on Tegra20 and Tegra30 which isn't a very cheap operation.
Replace all readl/writel occurrences in the code with the relaxed versions
since there is no need for the memory-access syncing.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/timer-tegra20.c | 35 +++++++++++++++--------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/clocksource/timer-tegra20.c b/drivers/clocksource/timer-tegra20.c
index 3e4f12aee8df..276b55f6ada0 100644
--- a/drivers/clocksource/timer-tegra20.c
+++ b/drivers/clocksource/timer-tegra20.c
@@ -52,9 +52,9 @@ static int tegra_timer_set_next_event(unsigned long cycles,
{
void __iomem *reg_base = timer_of_base(to_timer_of(evt));
- writel(TIMER_PTV_EN |
- ((cycles > 1) ? (cycles - 1) : 0), /* n+1 scheme */
- reg_base + TIMER_PTV);
+ writel_relaxed(TIMER_PTV_EN |
+ ((cycles > 1) ? (cycles - 1) : 0), /* n+1 scheme */
+ reg_base + TIMER_PTV);
return 0;
}
@@ -63,7 +63,7 @@ static int tegra_timer_shutdown(struct clock_event_device *evt)
{
void __iomem *reg_base = timer_of_base(to_timer_of(evt));
- writel(0, reg_base + TIMER_PTV);
+ writel_relaxed(0, reg_base + TIMER_PTV);
return 0;
}
@@ -72,9 +72,9 @@ static int tegra_timer_set_periodic(struct clock_event_device *evt)
{
void __iomem *reg_base = timer_of_base(to_timer_of(evt));
- writel(TIMER_PTV_EN | TIMER_PTV_PER |
- ((timer_of_rate(to_timer_of(evt)) / HZ) - 1),
- reg_base + TIMER_PTV);
+ writel_relaxed(TIMER_PTV_EN | TIMER_PTV_PER |
+ ((timer_of_rate(to_timer_of(evt)) / HZ) - 1),
+ reg_base + TIMER_PTV);
return 0;
}
@@ -84,7 +84,7 @@ static irqreturn_t tegra_timer_isr(int irq, void *dev_id)
struct clock_event_device *evt = (struct clock_event_device *)dev_id;
void __iomem *reg_base = timer_of_base(to_timer_of(evt));
- writel(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
+ writel_relaxed(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
evt->event_handler(evt);
return IRQ_HANDLED;
@@ -94,12 +94,12 @@ static void tegra_timer_suspend(struct clock_event_device *evt)
{
void __iomem *reg_base = timer_of_base(to_timer_of(evt));
- writel(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
+ writel_relaxed(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
}
static void tegra_timer_resume(struct clock_event_device *evt)
{
- writel(usec_config, timer_reg_base + TIMERUS_USEC_CFG);
+ writel_relaxed(usec_config, timer_reg_base + TIMERUS_USEC_CFG);
}
static DEFINE_PER_CPU(struct timer_of, tegra_to) = {
@@ -123,8 +123,8 @@ static int tegra_timer_setup(unsigned int cpu)
{
struct timer_of *to = per_cpu_ptr(&tegra_to, cpu);
- writel(0, timer_of_base(to) + TIMER_PTV);
- writel(TIMER_PCR_INTR_CLR, timer_of_base(to) + TIMER_PCR);
+ writel_relaxed(0, timer_of_base(to) + TIMER_PTV);
+ writel_relaxed(TIMER_PCR_INTR_CLR, timer_of_base(to) + TIMER_PCR);
irq_force_affinity(to->clkevt.irq, cpumask_of(cpu));
enable_irq(to->clkevt.irq);
@@ -148,13 +148,13 @@ static int tegra_timer_stop(unsigned int cpu)
static u64 notrace tegra_read_sched_clock(void)
{
- return readl(timer_reg_base + TIMERUS_CNTR_1US);
+ return readl_relaxed(timer_reg_base + TIMERUS_CNTR_1US);
}
#ifdef CONFIG_ARM
static unsigned long tegra_delay_timer_read_counter_long(void)
{
- return readl(timer_reg_base + TIMERUS_CNTR_1US);
+ return readl_relaxed(timer_reg_base + TIMERUS_CNTR_1US);
}
static struct delay_timer tegra_delay_timer = {
@@ -175,8 +175,9 @@ static struct timer_of suspend_rtc_to = {
*/
static u64 tegra_rtc_read_ms(struct clocksource *cs)
{
- u32 ms = readl(timer_of_base(&suspend_rtc_to) + RTC_MILLISECONDS);
- u32 s = readl(timer_of_base(&suspend_rtc_to) + RTC_SHADOW_SECONDS);
+ void __iomem *reg_base = timer_of_base(&suspend_rtc_to);
+ u32 ms = readl_relaxed(reg_base + RTC_MILLISECONDS);
+ u32 s = readl_relaxed(reg_base + RTC_SHADOW_SECONDS);
return (u64)s * MSEC_PER_SEC + ms;
}
@@ -261,7 +262,7 @@ static int __init tegra_init_timer(struct device_node *np, bool tegra20)
goto out;
}
- writel(usec_config, timer_reg_base + TIMERUS_USEC_CFG);
+ writel_relaxed(usec_config, timer_reg_base + TIMERUS_USEC_CFG);
for_each_possible_cpu(cpu) {
struct timer_of *cpu_to = per_cpu_ptr(&tegra_to, cpu);
--
2.17.1
next prev parent reply other threads:[~2019-06-26 14:47 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-26 14:43 [GIT PULL] timer drivers for v5.4 Daniel Lezcano
2019-06-26 14:46 ` [PATCH 01/25] clocksource/drivers/timer-meson6: Update with SPDX Licence identifier Daniel Lezcano
2019-06-26 14:46 ` [PATCH 02/25] clocksource/drivers/ixp4xx: Implement delay timer Daniel Lezcano
2019-06-26 14:46 ` [PATCH 03/25] clocksource/drivers/arc_timer: Use BIT() instead of _BITUL() Daniel Lezcano
2019-06-26 14:46 ` [PATCH 04/25] clocksource/drivers/exynos_mct: Increase priority over ARM arch timer Daniel Lezcano
2019-06-26 14:46 ` [PATCH 05/25] clocksource/drivers/tegra: Support per-CPU timers on all Tegra's Daniel Lezcano
2019-06-26 14:46 ` [PATCH 06/25] clocksource/drivers/tegra: Unify timer code Daniel Lezcano
2019-06-26 14:46 ` [PATCH 07/25] clocksource/drivers/tegra: Reset hardware state on init Daniel Lezcano
2019-06-26 14:46 ` Daniel Lezcano [this message]
2019-06-26 14:46 ` [PATCH 09/25] clocksource/drivers/tegra: Release all IRQ's on request_irq() error Daniel Lezcano
2019-06-26 14:46 ` [PATCH 10/25] clocksource/drivers/tegra: Minor code clean up Daniel Lezcano
2019-06-26 14:46 ` [PATCH 11/25] clocksource/drivers/tegra: Support COMPILE_TEST universally Daniel Lezcano
2019-06-26 14:46 ` [PATCH 12/25] clocksource/drivers/tegra: Lower clocksource rating for some Tegra's Daniel Lezcano
2019-06-26 14:46 ` [PATCH 13/25] clocksource/drivers/tegra: Rename timer-tegra20.c to timer-tegra.c Daniel Lezcano
2019-06-26 14:46 ` [PATCH 14/25] clocksource/drivers/sysctr: Add nxp system counter timer driver support Daniel Lezcano
2019-06-26 14:46 ` [PATCH 15/25] clocksource/drivers/arm_arch_timer: Extract elf_hwcap use to arch-helper Daniel Lezcano
2019-06-26 14:46 ` [PATCH 16/25] clocksource/drivers/tegra: Restore timer rate on Tegra210 Daniel Lezcano
2019-06-26 14:46 ` [PATCH 17/25] clocksource/drivers/tegra: Remove duplicated use of per_cpu_ptr Daniel Lezcano
2019-06-26 14:46 ` [PATCH 18/25] clocksource/drivers/tegra: Set and use timer's period Daniel Lezcano
2019-06-26 14:46 ` [PATCH 19/25] clocksource/drivers/tegra: Drop unneeded typecasting in one place Daniel Lezcano
2019-06-26 14:46 ` [PATCH 20/25] clocksource/drivers/tegra: Add verbose definition for 1MHz constant Daniel Lezcano
2019-06-26 14:46 ` [PATCH 21/25] clocksource/drivers/tegra: Restore base address before cleanup Daniel Lezcano
2019-06-26 14:46 ` [PATCH 22/25] clocksource/drivers/tegra: Cycles can't be 0 Daniel Lezcano
2019-06-26 14:46 ` [PATCH 23/25] clocksource/drivers/tegra: Set up maximum-ticks limit properly Daniel Lezcano
2019-06-26 14:46 ` [PATCH 24/25] clocksource/drivers/davinci: Add support for clockevents Daniel Lezcano
2019-06-26 14:46 ` [PATCH 25/25] clocksource/drivers/davinci: Add support for clocksource Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190626144651.16742-8-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=digetx@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®