* [PATCH] drm: Move radeon and amdgpu Kconfig options into their directories
@ 2019-10-16 18:52 Andrew F. Davis
0 siblings, 0 replies; 5+ messages in thread
From: Andrew F. Davis @ 2019-10-16 18:52 UTC (permalink / raw)
To: Maarten Lankhorst, Maxime Ripard, Sean Paul, David Airlie, Daniel Vetter
Cc: dri-devel, linux-kernel, Andrew F . Davis
Most Kconfig options to enable a driver are in the Kconfig file
inside the relevant directory, move these two to the same.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
drivers/gpu/drm/Kconfig | 34 ------------------------------
drivers/gpu/drm/amd/amdgpu/Kconfig | 18 ++++++++++++++++
drivers/gpu/drm/radeon/Kconfig | 18 ++++++++++++++++
3 files changed, 36 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index e67c194c2aca..bc5329b697ad 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -203,42 +203,8 @@ source "drivers/gpu/drm/i2c/Kconfig"
source "drivers/gpu/drm/arm/Kconfig"
-config DRM_RADEON
- tristate "ATI Radeon"
- depends on DRM && PCI && MMU
- select FW_LOADER
- select DRM_KMS_HELPER
- select DRM_TTM
- select POWER_SUPPLY
- select HWMON
- select BACKLIGHT_CLASS_DEVICE
- select INTERVAL_TREE
- help
- Choose this option if you have an ATI Radeon graphics card. There
- are both PCI and AGP versions. You don't need to choose this to
- run the Radeon in plain VGA mode.
-
- If M is selected, the module will be called radeon.
-
source "drivers/gpu/drm/radeon/Kconfig"
-config DRM_AMDGPU
- tristate "AMD GPU"
- depends on DRM && PCI && MMU
- select FW_LOADER
- select DRM_KMS_HELPER
- select DRM_SCHED
- select DRM_TTM
- select POWER_SUPPLY
- select HWMON
- select BACKLIGHT_CLASS_DEVICE
- select INTERVAL_TREE
- select CHASH
- help
- Choose this option if you have a recent AMD Radeon graphics card.
-
- If M is selected, the module will be called amdgpu.
-
source "drivers/gpu/drm/amd/amdgpu/Kconfig"
source "drivers/gpu/drm/nouveau/Kconfig"
diff --git a/drivers/gpu/drm/amd/amdgpu/Kconfig b/drivers/gpu/drm/amd/amdgpu/Kconfig
index 2e98c016cb47..a53554557cc6 100644
--- a/drivers/gpu/drm/amd/amdgpu/Kconfig
+++ b/drivers/gpu/drm/amd/amdgpu/Kconfig
@@ -1,4 +1,22 @@
# SPDX-License-Identifier: GPL-2.0-only
+
+config DRM_AMDGPU
+ tristate "AMD GPU"
+ depends on DRM && PCI && MMU
+ select FW_LOADER
+ select DRM_KMS_HELPER
+ select DRM_SCHED
+ select DRM_TTM
+ select POWER_SUPPLY
+ select HWMON
+ select BACKLIGHT_CLASS_DEVICE
+ select INTERVAL_TREE
+ select CHASH
+ help
+ Choose this option if you have a recent AMD Radeon graphics card.
+
+ If M is selected, the module will be called amdgpu.
+
config DRM_AMDGPU_SI
bool "Enable amdgpu support for SI parts"
depends on DRM_AMDGPU
diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig
index 6f60f4840cc5..ba67b879d31d 100644
--- a/drivers/gpu/drm/radeon/Kconfig
+++ b/drivers/gpu/drm/radeon/Kconfig
@@ -1,4 +1,22 @@
# SPDX-License-Identifier: GPL-2.0-only
+
+config DRM_RADEON
+ tristate "ATI Radeon"
+ depends on DRM && PCI && MMU
+ select FW_LOADER
+ select DRM_KMS_HELPER
+ select DRM_TTM
+ select POWER_SUPPLY
+ select HWMON
+ select BACKLIGHT_CLASS_DEVICE
+ select INTERVAL_TREE
+ help
+ Choose this option if you have an ATI Radeon graphics card. There
+ are both PCI and AGP versions. You don't need to choose this to
+ run the Radeon in plain VGA mode.
+
+ If M is selected, the module will be called radeon.
+
config DRM_RADEON_USERPTR
bool "Always enable userptr support"
depends on DRM_RADEON
--
2.17.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] drm: Move radeon and amdgpu Kconfig options into their directories
2022-08-23 0:01 Andrew Davis
2022-08-23 0:06 ` Randy Dunlap
@ 2022-08-23 5:59 ` Christian König
1 sibling, 0 replies; 5+ messages in thread
From: Christian König @ 2022-08-23 5:59 UTC (permalink / raw)
To: Andrew Davis, David Airlie, Daniel Vetter, dri-devel, linux-kernel
Am 23.08.22 um 02:01 schrieb Andrew Davis:
> Most Kconfig options to enable a driver are in the Kconfig file
> inside the relevant directory, move these two to the same.
>
> Signed-off-by: Andrew Davis <afd@ti.com>
With the tab vs. spaces pointed out by Randy fixed the patch is
Reviewed-by: Christian König <christian.koenig@amd.com>
> ---
> drivers/gpu/drm/Kconfig | 42 ------------------------------
> drivers/gpu/drm/amd/amdgpu/Kconfig | 22 ++++++++++++++++
> drivers/gpu/drm/radeon/Kconfig | 22 ++++++++++++++++
> 3 files changed, 44 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 6c2256e8474b..24fa9ccd92a4 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -234,50 +234,8 @@ source "drivers/gpu/drm/i2c/Kconfig"
>
> source "drivers/gpu/drm/arm/Kconfig"
>
> -config DRM_RADEON
> - tristate "ATI Radeon"
> - depends on DRM && PCI && MMU
> - depends on AGP || !AGP
> - select FW_LOADER
> - select DRM_DISPLAY_DP_HELPER
> - select DRM_DISPLAY_HELPER
> - select DRM_KMS_HELPER
> - select DRM_TTM
> - select DRM_TTM_HELPER
> - select POWER_SUPPLY
> - select HWMON
> - select BACKLIGHT_CLASS_DEVICE
> - select INTERVAL_TREE
> - help
> - Choose this option if you have an ATI Radeon graphics card. There
> - are both PCI and AGP versions. You don't need to choose this to
> - run the Radeon in plain VGA mode.
> -
> - If M is selected, the module will be called radeon.
> -
> source "drivers/gpu/drm/radeon/Kconfig"
>
> -config DRM_AMDGPU
> - tristate "AMD GPU"
> - depends on DRM && PCI && MMU
> - select FW_LOADER
> - select DRM_DISPLAY_DP_HELPER
> - select DRM_DISPLAY_HDMI_HELPER
> - select DRM_DISPLAY_HELPER
> - select DRM_KMS_HELPER
> - select DRM_SCHED
> - select DRM_TTM
> - select DRM_TTM_HELPER
> - select POWER_SUPPLY
> - select HWMON
> - select BACKLIGHT_CLASS_DEVICE
> - select INTERVAL_TREE
> - select DRM_BUDDY
> - help
> - Choose this option if you have a recent AMD Radeon graphics card.
> -
> - If M is selected, the module will be called amdgpu.
> -
> source "drivers/gpu/drm/amd/amdgpu/Kconfig"
>
> source "drivers/gpu/drm/nouveau/Kconfig"
> diff --git a/drivers/gpu/drm/amd/amdgpu/Kconfig b/drivers/gpu/drm/amd/amdgpu/Kconfig
> index 7777d55275de..36b1206124cf 100644
> --- a/drivers/gpu/drm/amd/amdgpu/Kconfig
> +++ b/drivers/gpu/drm/amd/amdgpu/Kconfig
> @@ -1,4 +1,26 @@
> # SPDX-License-Identifier: MIT
> +
> +config DRM_AMDGPU
> + tristate "AMD GPU"
> + depends on DRM && PCI && MMU
> + select FW_LOADER
> + select DRM_DISPLAY_DP_HELPER
> + select DRM_DISPLAY_HDMI_HELPER
> + select DRM_DISPLAY_HELPER
> + select DRM_KMS_HELPER
> + select DRM_SCHED
> + select DRM_TTM
> + select DRM_TTM_HELPER
> + select POWER_SUPPLY
> + select HWMON
> + select BACKLIGHT_CLASS_DEVICE
> + select INTERVAL_TREE
> + select DRM_BUDDY
> + help
> + Choose this option if you have a recent AMD Radeon graphics card.
> +
> + If M is selected, the module will be called amdgpu.
> +
> config DRM_AMDGPU_SI
> bool "Enable amdgpu support for SI parts"
> depends on DRM_AMDGPU
> diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig
> index 52819e7f1fca..3248d12c562d 100644
> --- a/drivers/gpu/drm/radeon/Kconfig
> +++ b/drivers/gpu/drm/radeon/Kconfig
> @@ -1,4 +1,26 @@
> # SPDX-License-Identifier: MIT
> +
> +config DRM_RADEON
> + tristate "ATI Radeon"
> + depends on DRM && PCI && MMU
> + depends on AGP || !AGP
> + select FW_LOADER
> + select DRM_DISPLAY_DP_HELPER
> + select DRM_DISPLAY_HELPER
> + select DRM_KMS_HELPER
> + select DRM_TTM
> + select DRM_TTM_HELPER
> + select POWER_SUPPLY
> + select HWMON
> + select BACKLIGHT_CLASS_DEVICE
> + select INTERVAL_TREE
> + help
> + Choose this option if you have an ATI Radeon graphics card. There
> + are both PCI and AGP versions. You don't need to choose this to
> + run the Radeon in plain VGA mode.
> +
> + If M is selected, the module will be called radeon.
> +
> config DRM_RADEON_USERPTR
> bool "Always enable userptr support"
> depends on DRM_RADEON
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] drm: Move radeon and amdgpu Kconfig options into their directories
2022-08-23 0:06 ` Randy Dunlap
@ 2022-08-23 0:15 ` Andrew Davis
0 siblings, 0 replies; 5+ messages in thread
From: Andrew Davis @ 2022-08-23 0:15 UTC (permalink / raw)
To: Randy Dunlap, David Airlie, Daniel Vetter, Christian König,
dri-devel, linux-kernel
On 8/22/22 7:06 PM, Randy Dunlap wrote:
> Hi--
>
> On 8/22/22 17:01, Andrew Davis wrote:
>> Most Kconfig options to enable a driver are in the Kconfig file
>> inside the relevant directory, move these two to the same.
>>
>> Signed-off-by: Andrew Davis <afd@ti.com>
>> ---
>> drivers/gpu/drm/Kconfig | 42 ------------------------------
>> drivers/gpu/drm/amd/amdgpu/Kconfig | 22 ++++++++++++++++
>> drivers/gpu/drm/radeon/Kconfig | 22 ++++++++++++++++
>> 3 files changed, 44 insertions(+), 42 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
>> index 6c2256e8474b..24fa9ccd92a4 100644
>> --- a/drivers/gpu/drm/Kconfig
>> +++ b/drivers/gpu/drm/Kconfig
>> @@ -234,50 +234,8 @@ source "drivers/gpu/drm/i2c/Kconfig"
>>
>> source "drivers/gpu/drm/arm/Kconfig"
>>
>> -config DRM_RADEON
>> - tristate "ATI Radeon"
>> - depends on DRM && PCI && MMU
>> - depends on AGP || !AGP
>> - select FW_LOADER
>> - select DRM_DISPLAY_DP_HELPER
>> - select DRM_DISPLAY_HELPER
>> - select DRM_KMS_HELPER
>> - select DRM_TTM
>> - select DRM_TTM_HELPER
>> - select POWER_SUPPLY
>> - select HWMON
>> - select BACKLIGHT_CLASS_DEVICE
>> - select INTERVAL_TREE
>> - help
>> - Choose this option if you have an ATI Radeon graphics card. There
>> - are both PCI and AGP versions. You don't need to choose this to
>> - run the Radeon in plain VGA mode.
>> -
>> - If M is selected, the module will be called radeon.
>> -
>> source "drivers/gpu/drm/radeon/Kconfig"
>>
>> -config DRM_AMDGPU
>> - tristate "AMD GPU"
>> - depends on DRM && PCI && MMU
>> - select FW_LOADER
>> - select DRM_DISPLAY_DP_HELPER
>> - select DRM_DISPLAY_HDMI_HELPER
>> - select DRM_DISPLAY_HELPER
>> - select DRM_KMS_HELPER
>> - select DRM_SCHED
>> - select DRM_TTM
>> - select DRM_TTM_HELPER
>> - select POWER_SUPPLY
>> - select HWMON
>> - select BACKLIGHT_CLASS_DEVICE
>> - select INTERVAL_TREE
>> - select DRM_BUDDY
>> - help
>> - Choose this option if you have a recent AMD Radeon graphics card.
>> -
>> - If M is selected, the module will be called amdgpu.
>> -
>> source "drivers/gpu/drm/amd/amdgpu/Kconfig"
>>
>> source "drivers/gpu/drm/nouveau/Kconfig"
>> diff --git a/drivers/gpu/drm/amd/amdgpu/Kconfig b/drivers/gpu/drm/amd/amdgpu/Kconfig
>> index 7777d55275de..36b1206124cf 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/Kconfig
>> +++ b/drivers/gpu/drm/amd/amdgpu/Kconfig
>> @@ -1,4 +1,26 @@
>> # SPDX-License-Identifier: MIT
>> +
>> +config DRM_AMDGPU
>> + tristate "AMD GPU"
>> + depends on DRM && PCI && MMU
>> + select FW_LOADER
>> + select DRM_DISPLAY_DP_HELPER
>> + select DRM_DISPLAY_HDMI_HELPER
>> + select DRM_DISPLAY_HELPER
>> + select DRM_KMS_HELPER
>> + select DRM_SCHED
>> + select DRM_TTM
>> + select DRM_TTM_HELPER
>> + select POWER_SUPPLY
>> + select HWMON
>> + select BACKLIGHT_CLASS_DEVICE
>> + select INTERVAL_TREE
>> + select DRM_BUDDY
>> + help
>> + Choose this option if you have a recent AMD Radeon graphics card.
>> +
>> + If M is selected, the module will be called amdgpu.
>> +
>> config DRM_AMDGPU_SI
>> bool "Enable amdgpu support for SI parts"
>> depends on DRM_AMDGPU
>> diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig
>> index 52819e7f1fca..3248d12c562d 100644
>> --- a/drivers/gpu/drm/radeon/Kconfig
>> +++ b/drivers/gpu/drm/radeon/Kconfig
>> @@ -1,4 +1,26 @@
>> # SPDX-License-Identifier: MIT
>> +
>> +config DRM_RADEON
>> + tristate "ATI Radeon"
>> + depends on DRM && PCI && MMU
>> + depends on AGP || !AGP
>> + select FW_LOADER
>> + select DRM_DISPLAY_DP_HELPER
>> + select DRM_DISPLAY_HELPER
>> + select DRM_KMS_HELPER
>> + select DRM_TTM
>
> Would you change those 2 lines above to use one tab + 2 spaces
> for indentation, please?
>
Sure, I just copy/paste exactly as they are in the top level Kconfig,
white-space issues and all, to make it easy to see that nothing was changed.
I can fix the indent issue in a followup patch if that work better.
Whichever works better.
Andrew
>> + select DRM_TTM_HELPER
>> + select POWER_SUPPLY
>> + select HWMON
>> + select BACKLIGHT_CLASS_DEVICE
>> + select INTERVAL_TREE
>> + help
>> + Choose this option if you have an ATI Radeon graphics card. There
>> + are both PCI and AGP versions. You don't need to choose this to
>> + run the Radeon in plain VGA mode.
>> +
>> + If M is selected, the module will be called radeon.
>> +
>> config DRM_RADEON_USERPTR
>> bool "Always enable userptr support"
>> depends on DRM_RADEON
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] drm: Move radeon and amdgpu Kconfig options into their directories
2022-08-23 0:01 Andrew Davis
@ 2022-08-23 0:06 ` Randy Dunlap
2022-08-23 0:15 ` Andrew Davis
2022-08-23 5:59 ` Christian König
1 sibling, 1 reply; 5+ messages in thread
From: Randy Dunlap @ 2022-08-23 0:06 UTC (permalink / raw)
To: Andrew Davis, David Airlie, Daniel Vetter, Christian König,
dri-devel, linux-kernel
Hi--
On 8/22/22 17:01, Andrew Davis wrote:
> Most Kconfig options to enable a driver are in the Kconfig file
> inside the relevant directory, move these two to the same.
>
> Signed-off-by: Andrew Davis <afd@ti.com>
> ---
> drivers/gpu/drm/Kconfig | 42 ------------------------------
> drivers/gpu/drm/amd/amdgpu/Kconfig | 22 ++++++++++++++++
> drivers/gpu/drm/radeon/Kconfig | 22 ++++++++++++++++
> 3 files changed, 44 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 6c2256e8474b..24fa9ccd92a4 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -234,50 +234,8 @@ source "drivers/gpu/drm/i2c/Kconfig"
>
> source "drivers/gpu/drm/arm/Kconfig"
>
> -config DRM_RADEON
> - tristate "ATI Radeon"
> - depends on DRM && PCI && MMU
> - depends on AGP || !AGP
> - select FW_LOADER
> - select DRM_DISPLAY_DP_HELPER
> - select DRM_DISPLAY_HELPER
> - select DRM_KMS_HELPER
> - select DRM_TTM
> - select DRM_TTM_HELPER
> - select POWER_SUPPLY
> - select HWMON
> - select BACKLIGHT_CLASS_DEVICE
> - select INTERVAL_TREE
> - help
> - Choose this option if you have an ATI Radeon graphics card. There
> - are both PCI and AGP versions. You don't need to choose this to
> - run the Radeon in plain VGA mode.
> -
> - If M is selected, the module will be called radeon.
> -
> source "drivers/gpu/drm/radeon/Kconfig"
>
> -config DRM_AMDGPU
> - tristate "AMD GPU"
> - depends on DRM && PCI && MMU
> - select FW_LOADER
> - select DRM_DISPLAY_DP_HELPER
> - select DRM_DISPLAY_HDMI_HELPER
> - select DRM_DISPLAY_HELPER
> - select DRM_KMS_HELPER
> - select DRM_SCHED
> - select DRM_TTM
> - select DRM_TTM_HELPER
> - select POWER_SUPPLY
> - select HWMON
> - select BACKLIGHT_CLASS_DEVICE
> - select INTERVAL_TREE
> - select DRM_BUDDY
> - help
> - Choose this option if you have a recent AMD Radeon graphics card.
> -
> - If M is selected, the module will be called amdgpu.
> -
> source "drivers/gpu/drm/amd/amdgpu/Kconfig"
>
> source "drivers/gpu/drm/nouveau/Kconfig"
> diff --git a/drivers/gpu/drm/amd/amdgpu/Kconfig b/drivers/gpu/drm/amd/amdgpu/Kconfig
> index 7777d55275de..36b1206124cf 100644
> --- a/drivers/gpu/drm/amd/amdgpu/Kconfig
> +++ b/drivers/gpu/drm/amd/amdgpu/Kconfig
> @@ -1,4 +1,26 @@
> # SPDX-License-Identifier: MIT
> +
> +config DRM_AMDGPU
> + tristate "AMD GPU"
> + depends on DRM && PCI && MMU
> + select FW_LOADER
> + select DRM_DISPLAY_DP_HELPER
> + select DRM_DISPLAY_HDMI_HELPER
> + select DRM_DISPLAY_HELPER
> + select DRM_KMS_HELPER
> + select DRM_SCHED
> + select DRM_TTM
> + select DRM_TTM_HELPER
> + select POWER_SUPPLY
> + select HWMON
> + select BACKLIGHT_CLASS_DEVICE
> + select INTERVAL_TREE
> + select DRM_BUDDY
> + help
> + Choose this option if you have a recent AMD Radeon graphics card.
> +
> + If M is selected, the module will be called amdgpu.
> +
> config DRM_AMDGPU_SI
> bool "Enable amdgpu support for SI parts"
> depends on DRM_AMDGPU
> diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig
> index 52819e7f1fca..3248d12c562d 100644
> --- a/drivers/gpu/drm/radeon/Kconfig
> +++ b/drivers/gpu/drm/radeon/Kconfig
> @@ -1,4 +1,26 @@
> # SPDX-License-Identifier: MIT
> +
> +config DRM_RADEON
> + tristate "ATI Radeon"
> + depends on DRM && PCI && MMU
> + depends on AGP || !AGP
> + select FW_LOADER
> + select DRM_DISPLAY_DP_HELPER
> + select DRM_DISPLAY_HELPER
> + select DRM_KMS_HELPER
> + select DRM_TTM
Would you change those 2 lines above to use one tab + 2 spaces
for indentation, please?
> + select DRM_TTM_HELPER
> + select POWER_SUPPLY
> + select HWMON
> + select BACKLIGHT_CLASS_DEVICE
> + select INTERVAL_TREE
> + help
> + Choose this option if you have an ATI Radeon graphics card. There
> + are both PCI and AGP versions. You don't need to choose this to
> + run the Radeon in plain VGA mode.
> +
> + If M is selected, the module will be called radeon.
> +
> config DRM_RADEON_USERPTR
> bool "Always enable userptr support"
> depends on DRM_RADEON
--
~Randy
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] drm: Move radeon and amdgpu Kconfig options into their directories
@ 2022-08-23 0:01 Andrew Davis
2022-08-23 0:06 ` Randy Dunlap
2022-08-23 5:59 ` Christian König
0 siblings, 2 replies; 5+ messages in thread
From: Andrew Davis @ 2022-08-23 0:01 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, Christian König, dri-devel,
linux-kernel
Cc: Andrew Davis
Most Kconfig options to enable a driver are in the Kconfig file
inside the relevant directory, move these two to the same.
Signed-off-by: Andrew Davis <afd@ti.com>
---
drivers/gpu/drm/Kconfig | 42 ------------------------------
drivers/gpu/drm/amd/amdgpu/Kconfig | 22 ++++++++++++++++
drivers/gpu/drm/radeon/Kconfig | 22 ++++++++++++++++
3 files changed, 44 insertions(+), 42 deletions(-)
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 6c2256e8474b..24fa9ccd92a4 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -234,50 +234,8 @@ source "drivers/gpu/drm/i2c/Kconfig"
source "drivers/gpu/drm/arm/Kconfig"
-config DRM_RADEON
- tristate "ATI Radeon"
- depends on DRM && PCI && MMU
- depends on AGP || !AGP
- select FW_LOADER
- select DRM_DISPLAY_DP_HELPER
- select DRM_DISPLAY_HELPER
- select DRM_KMS_HELPER
- select DRM_TTM
- select DRM_TTM_HELPER
- select POWER_SUPPLY
- select HWMON
- select BACKLIGHT_CLASS_DEVICE
- select INTERVAL_TREE
- help
- Choose this option if you have an ATI Radeon graphics card. There
- are both PCI and AGP versions. You don't need to choose this to
- run the Radeon in plain VGA mode.
-
- If M is selected, the module will be called radeon.
-
source "drivers/gpu/drm/radeon/Kconfig"
-config DRM_AMDGPU
- tristate "AMD GPU"
- depends on DRM && PCI && MMU
- select FW_LOADER
- select DRM_DISPLAY_DP_HELPER
- select DRM_DISPLAY_HDMI_HELPER
- select DRM_DISPLAY_HELPER
- select DRM_KMS_HELPER
- select DRM_SCHED
- select DRM_TTM
- select DRM_TTM_HELPER
- select POWER_SUPPLY
- select HWMON
- select BACKLIGHT_CLASS_DEVICE
- select INTERVAL_TREE
- select DRM_BUDDY
- help
- Choose this option if you have a recent AMD Radeon graphics card.
-
- If M is selected, the module will be called amdgpu.
-
source "drivers/gpu/drm/amd/amdgpu/Kconfig"
source "drivers/gpu/drm/nouveau/Kconfig"
diff --git a/drivers/gpu/drm/amd/amdgpu/Kconfig b/drivers/gpu/drm/amd/amdgpu/Kconfig
index 7777d55275de..36b1206124cf 100644
--- a/drivers/gpu/drm/amd/amdgpu/Kconfig
+++ b/drivers/gpu/drm/amd/amdgpu/Kconfig
@@ -1,4 +1,26 @@
# SPDX-License-Identifier: MIT
+
+config DRM_AMDGPU
+ tristate "AMD GPU"
+ depends on DRM && PCI && MMU
+ select FW_LOADER
+ select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_HDMI_HELPER
+ select DRM_DISPLAY_HELPER
+ select DRM_KMS_HELPER
+ select DRM_SCHED
+ select DRM_TTM
+ select DRM_TTM_HELPER
+ select POWER_SUPPLY
+ select HWMON
+ select BACKLIGHT_CLASS_DEVICE
+ select INTERVAL_TREE
+ select DRM_BUDDY
+ help
+ Choose this option if you have a recent AMD Radeon graphics card.
+
+ If M is selected, the module will be called amdgpu.
+
config DRM_AMDGPU_SI
bool "Enable amdgpu support for SI parts"
depends on DRM_AMDGPU
diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig
index 52819e7f1fca..3248d12c562d 100644
--- a/drivers/gpu/drm/radeon/Kconfig
+++ b/drivers/gpu/drm/radeon/Kconfig
@@ -1,4 +1,26 @@
# SPDX-License-Identifier: MIT
+
+config DRM_RADEON
+ tristate "ATI Radeon"
+ depends on DRM && PCI && MMU
+ depends on AGP || !AGP
+ select FW_LOADER
+ select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_HELPER
+ select DRM_KMS_HELPER
+ select DRM_TTM
+ select DRM_TTM_HELPER
+ select POWER_SUPPLY
+ select HWMON
+ select BACKLIGHT_CLASS_DEVICE
+ select INTERVAL_TREE
+ help
+ Choose this option if you have an ATI Radeon graphics card. There
+ are both PCI and AGP versions. You don't need to choose this to
+ run the Radeon in plain VGA mode.
+
+ If M is selected, the module will be called radeon.
+
config DRM_RADEON_USERPTR
bool "Always enable userptr support"
depends on DRM_RADEON
--
2.36.1
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-08-23 5:59 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-16 18:52 [PATCH] drm: Move radeon and amdgpu Kconfig options into their directories Andrew F. Davis
2022-08-23 0:01 Andrew Davis
2022-08-23 0:06 ` Randy Dunlap
2022-08-23 0:15 ` Andrew Davis
2022-08-23 5:59 ` Christian König
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome