* [PATCH V2] net: dsa: Add of_node_put() before break statement
@ 2020-08-23 18:50 Sumera Priyadarsini
2020-08-23 19:13 ` Andrew Lunn
0 siblings, 1 reply; 2+ messages in thread
From: Sumera Priyadarsini @ 2020-08-23 18:50 UTC (permalink / raw)
To: davem
Cc: Julia.Lawall, andrew, sean.wang, vivien.didelot, f.fainelli,
kuba, matthias.bgg, netdev, linux-arm-kernel, linux-mediatek,
linux-kernel, Sumera Priyadarsini
Every iteration of for_each_child_of_node() decrements
the reference count of the previous node, however when control
is transferred from the middle of the loop, as in the case of
a return or break or goto, there is no decrement thus ultimately
resulting in a memory leak.
Fix a potential memory leak in mt7530.c by inserting of_node_put()
before the break statement.
Issue found with Coccinelle.
---
Changes in v2:
Add another of_node_put() in for_each_child_of_node() as pointed
out by Andrew.
---
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
---
drivers/net/dsa/mt7530.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8dcb8a49ab67..e81198a65c26 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1327,6 +1327,7 @@ mt7530_setup(struct dsa_switch *ds)
if (phy_node->parent == priv->dev->of_node->parent) {
ret = of_get_phy_mode(mac_np, &interface);
if (ret && ret != -ENODEV)
+ of_node_put(mac_np)
return ret;
id = of_mdio_parse_addr(ds->dev, phy_node);
if (id == 0)
@@ -1334,6 +1335,7 @@ mt7530_setup(struct dsa_switch *ds)
if (id == 4)
priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
}
+ of_node_put(mac_np);
of_node_put(phy_node);
break;
}
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH V2] net: dsa: Add of_node_put() before break statement
2020-08-23 18:50 [PATCH V2] net: dsa: Add of_node_put() before break statement Sumera Priyadarsini
@ 2020-08-23 19:13 ` Andrew Lunn
0 siblings, 0 replies; 2+ messages in thread
From: Andrew Lunn @ 2020-08-23 19:13 UTC (permalink / raw)
To: Sumera Priyadarsini
Cc: davem, Julia.Lawall, sean.wang, vivien.didelot, f.fainelli, kuba,
matthias.bgg, netdev, linux-arm-kernel, linux-mediatek,
linux-kernel
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 8dcb8a49ab67..e81198a65c26 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -1327,6 +1327,7 @@ mt7530_setup(struct dsa_switch *ds)
> if (phy_node->parent == priv->dev->of_node->parent) {
> ret = of_get_phy_mode(mac_np, &interface);
> if (ret && ret != -ENODEV)
> + of_node_put(mac_np)
> return ret;
> id = of_mdio_parse_addr(ds->dev, phy_node);
> if (id == 0)
You are missing some { }. And a ; . I'm surprised gcc did not warn
you!
Andrew
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-08-23 19:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-23 18:50 [PATCH V2] net: dsa: Add of_node_put() before break statement Sumera Priyadarsini
2020-08-23 19:13 ` Andrew Lunn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®