mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Peter Zijlstra <peterz@infradead.org>
To: mingo@kernel.org, vincent.guittot@linaro.org, tglx@linutronix.de
Cc: linux-kernel@vger.kernel.org, dietmar.eggemann@arm.com,
	rostedt@goodmis.org, bristot@redhat.com, swood@redhat.com,
	valentin.schneider@arm.com, peterz@infradead.org
Subject: [PATCH 2/2] sched/hotplug: Ensure only per-cpu kthreads run during hotplug
Date: Fri, 11 Sep 2020 10:17:47 +0200	[thread overview]
Message-ID: <20200911082536.528661716@infradead.org> (raw)
In-Reply-To: <20200911081745.214686199@infradead.org>

In preparation for migrate_disable(), make sure only per-cpu kthreads
are allowed to run on !active CPUs.

This is ran (as one of the very first steps) from the cpu-hotplug
task which is a per-cpu kthread and completion of the hotplug
operation only requires such tasks.

This contraint enables the migrate_disable() implementation to wait
for completion of all migrate_disable regions on this CPU at hotplug
time without fear of any new ones starting.

This replaces the unlikely(rq->balance_callbacks) test at the tail of
context_switch with an unlikely(rq->balance_work), the fast path is
not affected.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
 kernel/sched/core.c  |  103 ++++++++++++++++++++++++++++++++++++++++++++++++++-
 kernel/sched/sched.h |    5 ++
 2 files changed, 106 insertions(+), 2 deletions(-)

--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3513,8 +3513,10 @@ static inline struct callback_head *spli
 	struct callback_head *head = rq->balance_callback;
 
 	lockdep_assert_held(&rq->lock);
-	if (head)
+	if (head) {
 		rq->balance_callback = NULL;
+		rq->balance_flags &= ~BALANCE_WORK;
+	}
 
 	return head;
 }
@@ -3569,6 +3571,8 @@ prepare_lock_switch(struct rq *rq, struc
 #endif
 }
 
+static bool balance_push(struct rq *rq);
+
 static inline void finish_lock_switch(struct rq *rq)
 {
 	/*
@@ -3577,7 +3581,16 @@ static inline void finish_lock_switch(st
 	 * prev into current:
 	 */
 	spin_acquire(&rq->lock.dep_map, 0, 0, _THIS_IP_);
-	__balance_callbacks(rq);
+	if (unlikely(rq->balance_flags)) {
+		/*
+		 * Run the balance_callbacks, except on hotplug
+		 * when we need to push the current task away.
+		 */
+		if (!IS_ENABLED(CONFIG_HOTPLUG_CPU) ||
+		    !(rq->balance_flags & BALANCE_PUSH) ||
+		    !balance_push(rq))
+			__balance_callbacks(rq);
+	}
 	raw_spin_unlock_irq(&rq->lock);
 }
 
@@ -6836,6 +6849,87 @@ static void migrate_tasks(struct rq *dea
 
 	rq->stop = stop;
 }
+
+static int __balance_push_stop(void *arg)
+{
+	struct task_struct *p = arg;
+	struct rq *rq = this_rq();
+	struct rq_flags rf;
+	int cpu;
+
+	raw_spin_lock_irq(&p->pi_lock);
+	rq_lock(rq, &rf);
+
+	if (task_rq(p) == rq && task_on_rq_queued(p)) {
+		cpu = select_fallback_rq(rq->cpu, p);
+		rq = __migrate_task(rq, &rf, p, cpu);
+	}
+
+	rq_unlock(rq, &rf);
+	raw_spin_unlock_irq(&p->pi_lock);
+
+	put_task_struct(p);
+
+	return 0;
+}
+
+static DEFINE_PER_CPU(struct cpu_stop_work, push_work);
+
+/*
+ * Ensure we only run per-cpu kthreads once the CPU goes !active.
+ */
+static bool balance_push(struct rq *rq)
+{
+	struct task_struct *push_task = rq->curr;
+
+	lockdep_assert_held(&rq->lock);
+	SCHED_WARN_ON(rq->cpu != smp_processor_id());
+
+	/*
+	 * Both the cpu-hotplug and stop task are in this class and are
+	 * required to complete the hotplug process.
+	 */
+	if (is_per_cpu_kthread(push_task))
+		return false;
+
+	get_task_struct(push_task);
+	/*
+	 * Temporarily drop rq->lock such that we can wake-up the stop task.
+	 * Both preemption and IRQs are still disabled.
+	 */
+	raw_spin_unlock(&rq->lock);
+	stop_one_cpu_nowait(rq->cpu, __balance_push_stop, push_task,
+			    this_cpu_ptr(&push_work));
+	/*
+	 * At this point need_resched() is true and we'll take the loop in
+	 * schedule(). The next pick is obviously going to be the stop task
+	 * which is_per_cpu_kthread() and will push this task away.
+	 */
+	raw_spin_lock(&rq->lock);
+
+	return true;
+}
+
+static void balance_push_set(int cpu, bool on)
+{
+	struct rq *rq = cpu_rq(cpu);
+	struct rq_flags rf;
+
+	rq_lock_irqsave(rq, &rf);
+	if (on)
+		rq->balance_flags |= BALANCE_PUSH;
+	else
+		rq->balance_flags &= ~BALANCE_PUSH;
+	rq_unlock_irqrestore(rq, &rf);
+}
+
+#else
+
+static inline bool balance_push(struct rq *rq)
+{
+	return false;
+}
+
 #endif /* CONFIG_HOTPLUG_CPU */
 
 void set_rq_online(struct rq *rq)
@@ -6921,6 +7015,8 @@ int sched_cpu_activate(unsigned int cpu)
 	struct rq *rq = cpu_rq(cpu);
 	struct rq_flags rf;
 
+	balance_push_set(cpu, false);
+
 #ifdef CONFIG_SCHED_SMT
 	/*
 	 * When going up, increment the number of cores with SMT present.
@@ -6968,6 +7064,8 @@ int sched_cpu_deactivate(unsigned int cp
 	 */
 	synchronize_rcu();
 
+	balance_push_set(cpu, true);
+
 #ifdef CONFIG_SCHED_SMT
 	/*
 	 * When going down, decrement the number of cores with SMT present.
@@ -6981,6 +7079,7 @@ int sched_cpu_deactivate(unsigned int cp
 
 	ret = cpuset_cpu_inactive(cpu);
 	if (ret) {
+		balance_push_set(cpu, false);
 		set_cpu_active(cpu, true);
 		return ret;
 	}
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -973,6 +973,7 @@ struct rq {
 	unsigned long		cpu_capacity_orig;
 
 	struct callback_head	*balance_callback;
+	unsigned char		balance_flags;
 
 	unsigned char		nohz_idle_balance;
 	unsigned char		idle_balance;
@@ -1384,6 +1385,9 @@ init_numa_balancing(unsigned long clone_
 
 #ifdef CONFIG_SMP
 
+#define BALANCE_WORK	0x01
+#define BALANCE_PUSH	0x02
+
 static inline void
 queue_balance_callback(struct rq *rq,
 		       struct callback_head *head,
@@ -1397,6 +1401,7 @@ queue_balance_callback(struct rq *rq,
 	head->func = (void (*)(struct callback_head *))func;
 	head->next = rq->balance_callback;
 	rq->balance_callback = head;
+	rq->balance_flags |= BALANCE_WORK;
 }
 
 #define rcu_dereference_check_sched_domain(p) \



  parent reply	other threads:[~2020-09-11  8:41 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-11  8:17 [PATCH 0/2] sched: migrate_disable() preparations Peter Zijlstra
2020-09-11  8:17 ` [PATCH 1/2] sched: Fix balance_callback() Peter Zijlstra
2020-09-11 12:17   ` Valentin Schneider
2020-09-11 12:25     ` peterz
2020-09-11 13:27       ` Valentin Schneider
2020-09-11  8:17 ` Peter Zijlstra [this message]
2020-09-11 12:17   ` [PATCH 2/2] sched/hotplug: Ensure only per-cpu kthreads run during hotplug Valentin Schneider
2020-09-11 12:29     ` peterz
2020-09-11 13:48       ` Valentin Schneider
2020-09-16 10:18   ` Sebastian Andrzej Siewior
2020-09-16 12:10     ` peterz
2020-09-16 13:58       ` Sebastian Andrzej Siewior
2020-09-16 14:07         ` peterz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200911082536.528661716@infradead.org \
    --to=peterz@infradead.org \
    --cc=bristot@redhat.com \
    --cc=dietmar.eggemann@arm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=swood@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=valentin.schneider@arm.com \
    --cc=vincent.guittot@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®