Re: [PATCH v2] mfd: kempld-core: Check for DMI definition before ACPI

[Guenter Roeck <linux@roeck-us.net>]

On Tue, Nov 10, 2020 at 03:23:21PM +0000, Michael Brunner wrote:
> Change the detection order to priorize DMI table entries over available
> ACPI entries.
> 
> This makes it more easy for product developers to patch product specific
> handling into the driver.
> Furthermore it allows to simplify the implementation a bit and
> especially to remove the need to force synchronous probing.
> 
> Based on the following commit introduced with v5.10-rc1:
> commit e8299c7313af ("mfd: Add ACPI support to Kontron PLD driver")
> 
> v2: Fixed coding style as suggested by Guenther Roeck
> 

Nit: change logs should be after '---'.

Other than that,

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

Guenter

> Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
> ---
>  drivers/mfd/kempld-core.c | 24 +++---------------------
>  1 file changed, 3 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
> index 2c9295953c11..ecd26271b9a4 100644
> --- a/drivers/mfd/kempld-core.c
> +++ b/drivers/mfd/kempld-core.c
> @@ -125,7 +125,6 @@ static const struct kempld_platform_data kempld_platform_data_generic = {
>  };
>  
>  static struct platform_device *kempld_pdev;
> -static bool kempld_acpi_mode;
>  
>  static int kempld_create_platform_device(const struct dmi_system_id *id)
>  {
> @@ -501,8 +500,6 @@ static int kempld_probe(struct platform_device *pdev)
>  		ret = kempld_get_acpi_data(pdev);
>  		if (ret)
>  			return ret;
> -
> -		kempld_acpi_mode = true;
>  	} else if (kempld_pdev != pdev) {
>  		/*
>  		 * The platform device we are probing is not the one we
> @@ -565,7 +562,6 @@ static struct platform_driver kempld_driver = {
>  	.driver		= {
>  		.name	= "kempld",
>  		.acpi_match_table = ACPI_PTR(kempld_acpi_table),
> -		.probe_type = PROBE_FORCE_SYNCHRONOUS,
>  	},
>  	.probe		= kempld_probe,
>  	.remove		= kempld_remove,
> @@ -884,7 +880,6 @@ MODULE_DEVICE_TABLE(dmi, kempld_dmi_table);
>  static int __init kempld_init(void)
>  {
>  	const struct dmi_system_id *id;
> -	int ret;
>  
>  	if (force_device_id[0]) {
>  		for (id = kempld_dmi_table;
> @@ -894,24 +889,11 @@ static int __init kempld_init(void)
>  					break;
>  		if (id->matches[0].slot == DMI_NONE)
>  			return -ENODEV;
> -	}
> -
> -	ret = platform_driver_register(&kempld_driver);
> -	if (ret)
> -		return ret;
> -
> -	/*
> -	 * With synchronous probing the device should already be probed now.
> -	 * If no device id is forced and also no ACPI definition for the
> -	 * device was found, scan DMI table as fallback.
> -	 *
> -	 * If drivers_autoprobing is disabled and the device is found here,
> -	 * only that device can be bound manually later.
> -	 */
> -	if (!kempld_pdev && !kempld_acpi_mode)
> +	} else {
>  		dmi_check_system(kempld_dmi_table);
> +	}
>  
> -	return 0;
> +	return platform_driver_register(&kempld_driver);
>  }
>  
>  static void __exit kempld_exit(void)
> -- 
> 2.25.1
>